ALLROUNDER 470 S Multi-component

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "ALLROUNDER 470 S Multi-component"

Transcription

1 Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical

2

3 Machine dimensions 47 S Multi-component ) 162 8) 213 8) 235 4)5) ) 28 1) 35 2) ) ) ) 215 / 435 7) min. 21 max ) ) 455 6) Electrical connection 78 Cooling water connection R39 1) Injection unit 3 2) Injection unit 7 3) Injection unit 1 4) Injection unit 17 5) Injection unit 29 6) Injection unit 4 7) Conveyor belt 8) Dimensions dependent on version 3

4 47 S Multi-component Technical data Clamping unit with clamping force max. kn 47 S 11 Opening force stroke max. kn mm Mould height, fixed variable min. mm Platen daylight fixed variable max. mm Distance between tie bars (w x h) mm 47 x 47 Mould mounting platens (w x h) max. mm 637 x 637 Weight of movable mould half max. kg 76 Ejector force stroke max. kn mm Dry cycle time EUROMAP ² min. s - mm 1,5-329 Injection unit with screw diameter mm Effective screw length L/D 17,7 14,5 24,5 2 17, ,7 Screw stroke max. mm Calculated stroke volume max. cm³ 1,6 15, Shot weight max. g PS 9, Material throughput max. kg/h PS 1,7 2,3 4,1 5,5 6,5 5,5 8 9,5 max. kg/h PA6.6,8 1,2 2,1 2,8 3,3 2,8 4 4,9 Injection pressure max. bar Holding pressure max. bar Injection flow ² max. cm³/s Screw circumferential speed ² max. m/min Screw torque max. Nm Nozzle contact force retraction stroke max. kn mm Heating capacity zones kw 2,3 4 4,1 4 4,9 5 Feed hopper l Drive and connection with horizontal/vertical injection unit Net weight of machine kg Sound press. level Insecurity ⁴ db(a) Oil filling l 175, 175, Drive power ² max. kw Electrical connection ³ kw Total A Machine A Heating A Cooling water connection max. C 3 3 min. Δp bar 1,5 DN 25 1,5 DN 25 Machine type with EUROMAP size designation ¹ 47 S 11-17/3 17/7 17/1 17/17 17/29 47 S 11-29/3 29/7 29/1 29/17 29/29 Upon request: other machine types and mould installation heights, screws, drive powers, etc. All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be mutually exclusive. 1) Clamping force (kn) - large injection unit = max. stroke volume (cm³) x max. injection pressure (kbar). 2) Specifications depend on the drive variant / drive configuration. 3) Specifications relate to 4 V/5 Hz. 4) Detailed info in the operating instr. [ ] Specifications apply to alternative equipment. 4

5 Technical data 47 S Multi-component Clamping unit with clamping force max. kn 47 S 11 Opening force stroke max. kn mm Mould height, fixed variable min. mm Platen daylight fixed variable max. mm Distance between tie bars (w x h) mm 47 x 47 Mould mounting platens (w x h) max. mm 637 x 637 Weight of movable mould half max. kg 76 Ejector force stroke max. kn mm Dry cycle time EUROMAP ² min. s - mm 1,5-329 Injection unit with screw diameter mm Effective screw length L/D ,3 2 17, Screw stroke max. mm Calculated stroke volume max. cm³ Shot weight max. g PS Material throughput max. kg/h PS 1 13, ,5 24, max. kg/h PA ,5 1,5 12,5 12, ,5 Injection pressure max. bar Holding pressure max. bar Injection flow ² max. cm³/s Screw circumferential speed ² max. m/min Screw torque max. Nm Nozzle contact force retraction stroke max. kn mm Heating capacity zones kw 9,4 5 6,4 5 9,4 5 Feed hopper l Drive and connection with horizontal/vertical injection unit Net weight of machine kg Sound press. level Insecurity ⁴ db(a) 66 3 Oil filling l 175,, Drive power ² max. kw 22 Electrical connection ³ kw Total A 1 Machine A --- Heating A --- Cooling water connection max. C 3 min. Δp bar 1,5 DN 25 Machine type with EUROMAP size designation ¹ 47 S 11-4/3 4/7 4/1 4/17 4/29 Upon request: other machine types and mould installation heights, screws, drive powers, etc. All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be mutually exclusive. 1) Clamping force (kn) - large injection unit = max. stroke volume (cm³) x max. injection pressure (kbar). 2) Specifications depend on the drive variant / drive configuration. 3) Specifications relate to 4 V/5 Hz. 4) Detailed info in the operating instr. [ ] Specifications apply to alternative equipment. 5

6 47 S Multi-component Mould installation dimensions Central ejection: Stroke max Rotary unit 4) (optional) E X Y 34 B A 8 Stroke max. 5 max Ø6 Ø9 Ø125H max. 4 1)3) 5 2)3) min. 25 Ejector bolt X Bore in mould (if required) Y 5 Ø32-.1 Ø24 Ø32 Ø82 Ø64 Ø Central ejection Injection unit 17 / 29 Injection unit 4 Robotic system mounting E M8-16 deep ) Injection unit ) Injection unit 4 3) Dimensions for horizontally displaceable injection unit (VARIO principle) reduced by 2 mm 4) See separate facts and figures for information M12-24 deep 6

7 Mould installation dimensions 47 S Multi-component Fixed mould mounting platen A Ø125H Ø Ø125H M12-24 deep Moving mould mounting platen B M8-16 deep for robotic system M1 for unscrewing device 4 x Ø3H

8 47 S Multi-component Device for parting line injection Ejector plate C Mount for vertical injection unit on carrier Off-centre ejection: Stroke max a 4 x M X 383 Off-centre ejection C D Ejector coupling (optional) X View D Ø24.8 Ø29.85f7 SW M16 M ( ) Ejector plate reference diameter 17 Injection unit 3 / 7 / 1 Injection unit 17 / 29 Bore in mould (if required) b a b a Ø11 Ø8 Ø9 1) 6 2 c 65 2 Ø11 Ø9 c Injection positions for injection units 2) a min a max b min c min Ø5 Ø6 1) Ø6 Injection unit 3 / 7 / 1 Injection unit 17 / 29 1) Injection unit 1 2) For dimensions of hydraulic nozzle or mechanical mould mounting, see separate dimension sheet (on request) 8

9 Shot weights 47 S Multi-component Theoretical shot weights for the most important injection moulding materials Injection units according to EUROMAP Screw diameter mm Polystyrene max. g PS Styrene heteropolymerizates max. g SB max. g SAN, ABS 1) Cellulose acetate max. g CA 1) Celluloseacetobutyrate max. g CAB 1) Polymethyl methacrylate max. g PMMA Polyphenylene ether, mod. max. g PPE Polycarbonate max. g PC Polysulphone max. g PSU Polyamides max. g PA 6.6 PA 6 1) max. g PA 6.1 PA 11 1) Polyoximethylene (Polyacetal) max. g POM Polyethylene terephthalate max. g PET Polyethylene max. g PE-LD max. g PE-HD Polypropylene max. g PP Fluorpolymerides max. g FEP, PFA, PCTFE 1) max. g ETFE Polyvinyl chloride max. g PVC-U max. g PVC-P 1) ,5 14, 9,5 13,5 9,5 13,5 11, 15,5 1, 14,5 1, 14,5 9, 13, 1, 14,5 1,5 15, 9,5 14, 9, 13, 12, 17, 11,5 16,5 7,5 1,5 7,5 11, 7,5 11, 15,5 22,5 13,5 19,5 11,5 17, 11, 15, Injection units according to EUROMAP Screw diameter mm Polystyrene max. g PS Styrene heteropolymerizates max. g SB max. g SAN, ABS 1) Cellulose acetate max. g CA 1) Celluloseacetobutyrate max. g CAB 1) Polymethyl methacrylate max. g PMMA Polyphenylene ether, mod. max. g PPE Polycarbonate max. g PC Polysulphone max. g PSU Polyamides max. g PA 6.6 PA 6 1) max. g PA 6.1 PA 11 1) Polyoximethylene (Polyacetal) max. g POM Polyethylene terephthalate max. g PET Polyethylene max. g PE-LD max. g PE-HD Polypropylene max. g PP Fluorpolymerides max. g FEP, PFA, PCTFE 1) max. g ETFE Polyvinyl chloride max. g PVC-U max. g PVC-P 1) ) average value 9

10 47 S Multi-component ARBURG GmbH + Co KG Arthur-Hehl-Strasse 7229 Lossburg Tel.: With locations in Europe: Germany, Belgium, Denmark, France, United Kingdom, Italy, Netherlands, Austria, Poland, Switzerland, Slovakia, Spain, Czech Republic, Turkey, Hungary Asia: People s Republic of China, Indonesia, Malaysia, Singapore, Taiwan, Thailand, United Arab Emirates America: Brazil, Mexico, USA For more information, please go to ARBURG GmbH + Co KG The brochure is protected by copyright. Any utilisation, which is not expressly permitted under copyright legislation, requires the previous approval of ARBURG. All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine. ARBURG GmbH + Co KG DIN EN ISO certified 68153_EN_GB_9216 Subject to alterations

ALLROUNDER 820 S Multi-component

ALLROUNDER 820 S Multi-component Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component

More information

ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.

ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290. Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245

More information

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200 Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385

More information

820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )

820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) ) Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342

More information

Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.

Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290. Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850

More information

ALLROUNDER 320 C GOLDEN EDITION

ALLROUNDER 320 C GOLDEN EDITION Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions

More information

ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.

ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29. Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7

More information

Facts and figures INTEGRALPICKER V.

Facts and figures INTEGRALPICKER V. Facts and figures INTEGRALPICKER V www.arburg.com INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2 Technical

More information

Facts and figures MULTILIFT SELECT 6

Facts and figures MULTILIFT SELECT 6 Facts and figures MULTILIFT SELECT 6 www.arburg.com MULTILIFT SELECT 6 Technical data Stroke X-axis min. 100 Stroke Z-axis Clamping face, fixed mould platen 190 A D K Stroke Y axis 156 B 2) C 123 P G L

More information

Hydraulic ALLROUNDERs

Hydraulic ALLROUNDERs Focus Hydraulic ALLROUNDERs Injection moulding machines for diverse applications www.arburg.com At a glance 1 2 2,5 Single-circuit pump technology Dual-circuit pump technology Hydraulic accumulator technology

More information

BP Statistical Review of World Energy June 2017

BP Statistical Review of World Energy June 2017 BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28

More information

ROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES

ROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES ROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES ROMI Industrial Complex in Santa Bárbara d Oeste - SP, Brazil INNOVATION + QUALITY Romi: Since 1930 producing high technology.

More information

Chit Chats clients save up to 70% on U.S. and international postage.

Chit Chats clients save up to 70% on U.S. and international postage. ONTARIO RATE CARD 2018 Prices are valid from January 21, 2018 Chit Chats clients save up to 70% on U.S. and international postage. Ship your package to the U.S. as if you were in the U.S. Packages under

More information

No.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures

No.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated

More information

Total credit to the non-financial sector (core debt), % of GDP Table F1.1

Total credit to the non-financial sector (core debt), % of GDP Table F1.1 Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0

More information

Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators

Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators 1. Description 1.1. Function The HYDAC charging and testing unit FPU-1 is used to charge accumulators with nitrogen

More information

RME Thermal Management - Lubrication

RME Thermal Management - Lubrication RME Thermal Management - Lubrication Safety and performance... Ø 09, 12, 16, 20 and 25 mm Fluids coolant water, glycol water heat transfer oils lubricating oils esters gases Applications cooling of electronics

More information

Paddle Flow Monitor Model PSR/PSE

Paddle Flow Monitor Model PSR/PSE Paddle Flow Monitor for liquids measuring monitoring analysing PSR/PSE Switching ranges: 2.5-4.8... 383-533 p max : 250 bar, t max : 110 C Connection: G ¼... G 1 ½, ¼" NPT... 1 ½" NPT S3 : or stainless

More information

TUR. Turbine Wheel Flowmeter. Plastic Model for Liquids. Measuring Ranges: GPM or GPM (Water)

TUR. Turbine Wheel Flowmeter. Plastic Model for Liquids. Measuring Ranges: GPM or GPM (Water) Turbine Wheel Flowmeter Plastic Model for Liquids measuring monitoring analyzing TUR TUR with Transmitter TUR with ADI-1 Measuring Ranges: 5.3...88 GPM or 11...440 GPM (Water) Measuring Accuracy: ± 1%

More information

Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators

Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators 1. DESCRIPTION 1.1. FUNCTION The HYDAC charging and testing unit FPU-1 is used to charge accumulators with nitrogen

More information

Transport carts and accessories

Transport carts and accessories ScanCell carts Open steel carts Transport carts Cabinets Racks Modules Transport Transport carts and accessories For more information: www.stanleyhealthcare.uk Transport carts Page General... Open transport

More information

Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report. From 2001 to 2021

Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report. From 2001 to 2021 Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report From 2001 to 2021 Global CV Markets Covered Industry Production Data Truck & Bus Model Production Forecast Engine Production

More information

Allen-Bradley 1397 Pulse Encoder Interface Card

Allen-Bradley 1397 Pulse Encoder Interface Card Installation Instructions IN Allen-Bradley 1397 Pulse Encoder Interface Card Cat. No. 1397-PE Table of Contents What This Option Provides........................ 1 Where This Option Is Used........................

More information

Accessories for Pressure Gauges

Accessories for Pressure Gauges Accessories for Pressure Gauges measuring monitoring analysing KOBOLD companies worldwide: ALGERIA, ARGENTINA, AUSTRALIA, AUSTRIA, BELGIUM, BULGARIA, CANADA, CHILE, CHINA, COLOMBIA, CZECH REPUBLIC, DOM.

More information

OUR HEADQUARTERS. The only name that matters for injection and compression moulding machines. UK Slovakia Taiwan RUBBER INJECTION MACHINE SERIES

OUR HEADQUARTERS. The only name that matters for injection and compression moulding machines. UK Slovakia Taiwan RUBBER INJECTION MACHINE SERIES RUBBER INJECTION MACHINE SERIES OUR HEADQUARTERS UK Slovakia Taiwan The only name that matters for injection and compression moulding machines www.panstone.eu www.panstone.eu Tel: +44 (0) 978 476 Email:

More information

Mineral Industry. Drive solutions for reclaimers, stackers, bulk conveyors applications

Mineral Industry. Drive solutions for reclaimers, stackers, bulk conveyors applications Mineral Industry Drive solutions for reclaimers, stackers, bulk conveyors applications A world specialist in drive systems World leader in the design and production of alternators and motors, Leroy-Somer,

More information

NGS. Dual-Magnet Float Switch. Pressure: up to 25 bar. Density: > 0.7 kg/dm 3. High switch capacity. Material: stainless steel 1.

NGS. Dual-Magnet Float Switch. Pressure: up to 25 bar. Density: > 0.7 kg/dm 3. High switch capacity. Material: stainless steel 1. Dual-Magnet Float Switch measuring monitoring analysing NGS Pressure: up to 5 bar O O Medium temperature: up to 50 C Density: > 0.7 kg/dm 3 High switch capacity O O Connection: square flange, DIN flange,

More information

Toggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving

Toggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving TE Toggle and Electric Type Injection Molding Machine series High Speed High Precision Energy Saving Machine series TB Hydraulic TH Hydraulic TN Hydraulic & All electric TE All electric VH Vertical hydraulic

More information

DVH. Vortex Flowmeter. Measuring range: Nm³/h. Accuracy: ± 0,7% of reading (liquids) ± 1% of reading (gases and steam) p max

DVH. Vortex Flowmeter. Measuring range: Nm³/h. Accuracy: ± 0,7% of reading (liquids) ± 1% of reading (gases and steam) p max Vortex Flowmeter measuring monitoring analysing DVH Measuring range: 3-8... 3057-280187 Nm³/h Accuracy: ± 0,7% of reading (liquids) ± 1% of reading (gases and steam) p max : 100 bar abs; t max : 400 C

More information

EVOline Socket Modules

EVOline Socket Modules 203 Protection types in sockets. Colour table Standard-colours To order other colours in RAL-Tones, please contact us. With contact protection Contact protection: Contact socket with child protection (increased

More information

replacement parts 6.1 General 6.2 Ordering

replacement parts 6.1 General 6.2 Ordering 6.0 Replacement Parts 6.1 General Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on the unit nameplate. 6.2 Ordering To ensure proper operation,

More information

Conrad Schulte GmbH & Co. KG

Conrad Schulte GmbH & Co. KG Particulars About Your Organisation 1.1 Name of your organization Conrad Schulte GmbH & Co. KG 1.2 What is/are the primary activity(ies) or product(s) of your organization? Oil Palm Growers Palm Oil Processors

More information

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min

More information

Hot Runner Guide Layout and Design

Hot Runner Guide Layout and Design H O T R U N N E R Layout and Design Stabilize your Process CAT-14-0001_EN-Rev05 EN 11/2017 T E C H N O L O G Y Layout and Design The purpose of this The - Layout and Design is intended to help everyone

More information

The World s Largest Injection Moulding Machine Manufacturer

The World s Largest Injection Moulding Machine Manufacturer The World s Largest Injection Moulding Machine Manufacturer Official Sales and Servicepartner of www.haitian.co.uk PRODUCTION AND GROWTH Established in 1966 and world leaders in injection moulding since

More information

Stafsjö s ATEX solutions for category 1 D (Zone 20)

Stafsjö s ATEX solutions for category 1 D (Zone 20) Stafsjö s ATEX solutions for category 1 D (Zone 20) Data is only for informational purpose. All specifications are subject to change without notice. 1 2017-02-2 issue 1 ATEX solutions for category 1 D

More information

KINGDOM OF CAMBODIA NATION RELIGION KING 3

KINGDOM OF CAMBODIA NATION RELIGION KING 3 KINGDOM OF CAMBODIA NATION RELIGION KING 3 TOURISM STATISTICS REPORT September 2017 MINISTRY OF TOURISM Statistics and Tourism Information Department No. A3, Street 169, Sangkat Veal Vong, Khan 7 Makara,

More information

Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons.

Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons. Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons. Mechanical feature Clamping: Minimizing mold strain by flexible fixed platen and highly rigid clamping structure with ultra capability of self lock.

More information

PML safety blowgun and HJP blowing unit Compressed air

PML safety blowgun and HJP blowing unit Compressed air PML safety blowgun and HJP blowing unit Compressed air Blowing equipment that combines ergonomics and rugged design Applications Workstation cleaning Blowing of machined parts and machining equipment Dust

More information

ACEA Report. Vehicles in use Europe 2017

ACEA Report. Vehicles in use Europe 2017 ACEA Report Vehicles in use Europe 2017 TABLE OF CONTENTS Summary... 2 Vehicles in use in Europe... 3 Passenger cars... 3 Light commercial vehicles... 4 Medium and heavy commercial vehicles... 5 Buses...

More information

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q1 2015

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q1 2015 NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE Q1 2015 ALTERNATIVE FUEL VEHICLE registrations: +28.8% in in first quarter In the first quarter of 2015, total alternative fuel vehicle (AFV) registrations

More information

Local Office Subsidiaries Subsidiaries Agencies Daughter Company Daughter Company

Local Office Subsidiaries Subsidiaries Agencies Daughter Company Daughter Company HEAD OFFICE & FACTORY 169-4, Gujang-Ri, Paltan-Myun, Hwasung-City, Gyeonggi-Do, 445-911 Korea TEL : + 82 31 350 2500(DID.) / + 82 31 350 2525(Export Div.) / + 82 31 350 2624(Research Institute) FAX : +

More information

4720/16.02 TEPRO. Engineering plastic products and subassemblies tailor-made, precise and functional

4720/16.02 TEPRO. Engineering plastic products and subassemblies tailor-made, precise and functional 4720/16.02 TEPRO Engineering plastic products and subassemblies tailor-made, precise and functional 2 Contents Page Plastics We know how. What is TEPRO? 4 TEPRO An overview 6 TEPRO Applications in perfection

More information

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q2 2015

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q2 2015 NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE Q2 2015 New alternative fuel vehicle (AFV) registrations in the EU by engine type Q2 2014 Q2 2015 Thousand units 70 60 50 40 30 20 10 0 EVs HEVs AFVs other

More information

The SHK manual chain hoist

The SHK manual chain hoist 0.206 The SHK manual chain hoist The SHK and SHK+ manual chain hoist The SHK manual chain hoist features a wide spectrum of applications, independent of a power supply. The robust, compact construction

More information

Single-acting pneumatic cylinder type ECS

Single-acting pneumatic cylinder type ECS Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder

More information

JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS

JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS COUNTRY/JURISDICTION * STATUS 10 NOVEMBER 2017 1. ALBANIA 01-03-2013 (AC) 08-08-2013 01-12-2013 2. ANDORRA

More information

AlixPartners Automotive Electrification Index. Second Quarter 2017

AlixPartners Automotive Electrification Index. Second Quarter 2017 AlixPartners Automotive Electrification Index Second Quarter 217 AlixPartners Automotive Electrification Index e-range E-RANGE = Sum of electric range of all electric vehicles (EV) sold By automaker, segment,

More information

CONDUCTIVE COMPOUND AND CONCENTRATES CABELEC CONDUCTIVE COMPOUNDS AND CONCENTRATES PRODUCT SELECTION GUIDE

CONDUCTIVE COMPOUND AND CONCENTRATES CABELEC CONDUCTIVE COMPOUNDS AND CONCENTRATES PRODUCT SELECTION GUIDE CONDUCTIVE COMPOUND AND CONCENTRATES CABELEC CONDUCTIVE COMPOUNDS AND CONCENTRATES PRODUCT SELECTION GUIDE Performance and leadership in black plastics Cabot Corporation is a global performance materials

More information

JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS

JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS COUNTRY/JURISDICTION * STATUS 15 DECEMBER 2017 1. ALBANIA 01-03-2013 (AC) 08-08-2013 01-12-2013 2. ANDORRA

More information

Flow. Oval Wheel Flowmeter Model DOE

Flow. Oval Wheel Flowmeter Model DOE Oval Wheel FIowmeter for low and high viscous liquids measuring monitoring analysing DOE Measuring range: 0.5 36 l/h und 1 40 l/min Viscosity range: 1 1000 cp Accuracy: ±1% of reading Material: stainless

More information

SAMPLE: Wipers intelligence service. Generated: July 11, 2016

SAMPLE: Wipers intelligence service. Generated: July 11, 2016 SAMPLE: Wipers intelligence service Generated: July 11, 2016 Table of contents Table of contents Introduction... Companies... Denso Corporation... Federal Mogul Corporation... Products... Hella KGaA Hueck

More information

Centering Unit. Alignment and positioning of transferred workpieces. MACM Series. Table. Max. allowable load weight: 2205 lbs (1000 kg) (MACM10)

Centering Unit. Alignment and positioning of transferred workpieces. MACM Series. Table. Max. allowable load weight: 2205 lbs (1000 kg) (MACM10) Centering Unit Alignment and positioning of transferred workpieces Contributes to space saving on conveyor lines Heavy workpieces can now be aligned and positioned with small cylinders, resulting in compact

More information

SARA : SYSTEM of AUTOMATIC RECEPTION and ANALYSIS

SARA : SYSTEM of AUTOMATIC RECEPTION and ANALYSIS SARA : SYSTEM of AUTOMATIC RECEPTION and ANALYSIS As an all-time forerunner in the field of grain sampling and technological advance, TOUT POUR LE GRAIN have also been one of the first in the world to

More information

Summary of debt securities outstanding

Summary of debt securities outstanding Summary of debt securities outstanding All countries........................ 22,695 15,852 6,665 3,427 1,762 Developed countries........................ 16,504 13,087 5,869 2,716 701 Austria 510 173 44

More information

MAN-P. Diaphragm Pressure Gauges. according to EN for Stringent Demands

MAN-P. Diaphragm Pressure Gauges. according to EN for Stringent Demands Diaphragm Pressure Gauges according to EN 837-3 for Stringent Demands measuring monitoring analysing MAN-P Housing: mm, 160 mm Connection: G ½, open measuring flange DIN/ANSI Material: stainless steel

More information

Analyses. May HolidayEuro Summer Purchasing Power of the Euro Abroad. Bank Austria Economics & Market Analysis Austria

Analyses. May HolidayEuro Summer Purchasing Power of the Euro Abroad. Bank Austria Economics & Market Analysis Austria Bank Austria Economics & Market Analysis Austria Analyses HolidayEuro Summer 2011 Purchasing Power of the Euro Abroad May 2011 http://economicresearch.bankaustria.at Overview Holiday uro in summer 2011

More information

Knife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9

Knife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9 Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an

More information

NGV refuelling connections Refuelling

NGV refuelling connections Refuelling NGV refuelling connections Refuelling Stäubli NGV refuelling connections Comprehensive range of NGV 1 compatible products for the refuelling of all kinds of Compressed Natural Gas vehicles in a safe environment

More information

DYWI Inject Systems - Anchors and Rock Bolts

DYWI Inject Systems - Anchors and Rock Bolts DYWI Inject Systems - Anchors and Rock Bolts 2 Contents Introduction... 3 DYWI Inject SILO 8044 Silicate Injection Resin for Anchors and Rock Bolts...4 Fields of Application... 4 Main Advantages... 4 System

More information

Lot no. Description. Page 1 of 6

Lot no. Description. Page 1 of 6 Injection Moulding (Ends: 2016-07-19 14:00:00.0) An online auction of Various Plastic Injection Moulding Machines and an Ultrasonic Plastic Welder from different locations. Buyers Premium 15% VAT 20% Location

More information

GEA charge air cooler. Innovations that put big things into motion. GEA Heat Exchangers GEA Maschinenkühltechnik

GEA charge air cooler. Innovations that put big things into motion. GEA Heat Exchangers GEA Maschinenkühltechnik GEA charge air cooler Innovations that put big things into motion GEA Heat Exchangers GEA Maschinenkühltechnik Charge air cooler in general GEA Maschinenkühltechnik Established component developer For

More information

ROMI EN SERIES PLASTIC INJECTION MOULDING MACHINES

ROMI EN SERIES PLASTIC INJECTION MOULDING MACHINES ROMI EN 70 ROMI EN 100 ROMI EN 170 ROMI EN 220 ROMI EN 300 ROMI EN 380 ROMI EN 450 ROMI EN 600 ROMI EN 800 ROMI EN 1100 PLSTI INJETION MOULDING MHINES ROMI EN SERIES ROM Industrial omplex in Santa árbara

More information

Engineering GREAT Solutions

Engineering GREAT Solutions Engineering GREAT Solutions Food & Beverage Complete range of innovative solutions for the food processing & packaging industry 02 Food & Beverage Contents 03 Specialist knowledge, unique solutions, improved

More information

Allegro Bioprocessing Workstations. Allegro TMBioprocessing Workstations. USD 2793b. The system s support trays are made of a highthe

Allegro Bioprocessing Workstations. Allegro TMBioprocessing Workstations. USD 2793b. The system s support trays are made of a highthe USD 2793a USD 2793b Allegro TMBioprocessing Workstations Allegro Bioprocessing Workstations To support supportaawide widerange rangeofoffluid fluidmanagement management To applicationswith withallegro

More information

giroflex 63 Stoll Giroflex AG

giroflex 63 Stoll Giroflex AG Reduced to the bare essentials but nonetheless special: the giroflex 63 has an appealing architectural style of design. Its architectural lines give the giroflex 63 an air of independence. The ergonomic

More information

DEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514

DEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 DEUTSCHE NORM February 2005 DIN EN ISO 1514 { ICS 87.100 Supersedes September 1997 edition. Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 Beschichtungsstoffe

More information

Hard metals for precision tools

Hard metals for precision tools Hard metals for precision tools EN Production sites Tianjin China Taiwan Shanghai Changtai Xiamen 1+2 Tamshui Wugu ispatching centre Logistics centre Kempten, Germany 2 product line Carbide products from

More information

Slimline Axial Flow Fans 80mm 92mm 119mm

Slimline Axial Flow Fans 80mm 92mm 119mm 80mm, 119mm Features: Low cost, low noise, high pressure fans. Sleeve bearings. Rated plastic impellers. Supplied with 300mm, 22AWG lead wire. 80mm, 92mm, 119mm Slimline Features: Low cost slimline AC

More information

Hoshizaki America, Inc.

Hoshizaki America, Inc. Hoshizaki America, Inc. Modular Crescent Cuber Models KM-501MAH KM-501MWH KM-501MRH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71254 Issued: 5-26-2006 CONTENTS Auxiliary Codes...

More information

Hoshizaki America, Inc.

Hoshizaki America, Inc. Hoshizaki America, Inc. Self-Contained Cubelet Models C-100BAE-AD C-100BAE-ADDS A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71278 Issued: 3-25-2008 Revised: 6-14-2012 CONTENTS

More information

TER. Thermostats for Industrial Applications. Switching range: C to C. Housing material: aluminium. Capillary tube: copper

TER. Thermostats for Industrial Applications. Switching range: C to C. Housing material: aluminium. Capillary tube: copper Thermostats for Industrial Applications measuring monitoring analysing TER OO Switching range: - 20... + 30 C to 80... +130 C OO Housing material: aluminium OO Capillary tube: copper T1 Model: TER-TX490

More information

HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-500MAH KM-500MWH KM-500MRH PARTS LIST

HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-500MAH KM-500MWH KM-500MRH PARTS LIST NO. 71185 ISSUED: JULY 17, 2001 REVISED: JAN. 24, 2003 HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-500MAH KM-500MWH KM-500MRH PARTS LIST KM-500MAH KM-500MWH L-0 April 2001 M-0 Dec. 2001 M-1 March 2002 M-2

More information

MODERNISATION SOLUTIONS. MRM W Line. TIME FOR A FACE-LIFT!

MODERNISATION SOLUTIONS. MRM W Line.  TIME FOR A FACE-LIFT! MODERNISATION SOLUTIONS TIME FOR A FACE-LIFT! ADVANCED FEATURES WITTUR SOLUTION FOR MODERNISATION The, Wittur flexible machine roomless electric lift, offers an ideal solution for new lifts in existing

More information

High Precision Turbine Wheel Flow Meter for Liquids

High Precision Turbine Wheel Flow Meter for Liquids High Precision Turbine Wheel Flow Meter for Liquids measuring monitoring analysing Measuring ranges: 0.006-0.1 to 10-500 L/min water Measuring accuracy: ± 1.25% f. s. pmax: 345 bar; tmax: 135 C Viscosity

More information

IMPORT/EXPORT MILITARY WEAPONS AND EQUIPMENT IN YEAR 2010 FOR PUBLIC

IMPORT/EXPORT MILITARY WEAPONS AND EQUIPMENT IN YEAR 2010 FOR PUBLIC IMPORT/EXPORT MILITARY WEAPONS AND EQUIPMENT IN YEAR 2010 FOR PUBLIC Slovenian import of military weapons and equipment in year 2010 Military list ML1 Smooth-bore weapons with a calibre of less than 20

More information

Table B1. Advanced Economies: Unemployment, Employment, and Real per Capita GDP (Percent)

Table B1. Advanced Economies: Unemployment, Employment, and Real per Capita GDP (Percent) Statistical Appendix Table B1. Advanced Economies: Unemployment, Employment, and Real per Capita GDP (Percent) Unemployment Rate 2 Averages 1 1993 2002 2003 12 Advanced Economies 6.8 6.9 6.7 6.5 6.3 5.8

More information

KM-1600MRH KM-1600MRH3

KM-1600MRH KM-1600MRH3 NO. 71188 ISSUED: JULY 25, 2001 REVISED: APR. 22, 1999 HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-1600MRH KM-1600MRH3 S LIST KM-1600MRH July 2001 KM-1600MRH3 July 2001 2 MATERIAL ABBREVIATIONS ALUMINUM

More information

exports of goods annual change (%)

exports of goods annual change (%) 12.0 Austria s foreign trade 2015 by world region imports of goods 2015 exports of goods 2015 region 1 1 share (%) share (%) Europe 106,984 80.4 104,032 79.1 EU 93,686 70.4 90,841 69.1 EFTA 8,020 6.0 8,098

More information

exports of goods annual change (%)

exports of goods annual change (%) 12.0 Austria s foreign trade 2016 by world region imports of goods 2016 exports of goods 2016 region 1 1 share (%) share (%) Europe 110,067 81.2 104,271 79.5 EU 96,801 71.4 91,112 69.4 EFTA 7,718 5.7 8,132

More information

Vortex-dV Motorised Torque Testing System. Operating Manual

Vortex-dV Motorised Torque Testing System. Operating Manual Vortex-dV Motorised Torque Testing System Operating Manual 431-468-01 July 2016 Important It is essential that you familiarise yourself with the contents of this Manual and the separate Guide to Safe Use

More information

DEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029

DEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 DEUTSCHE NORM May 2004 DIN EN ISO 4029 { ICS 21.060.10 Supersedes DIN 916, December 1980 edition. Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 Gewindestifte

More information

OECD unemployment rate stable at 5.8% in August 2017

OECD unemployment rate stable at 5.8% in August 2017 OECD unemployment rate stable at 5.8% in August 017 The OECD unemployment rate was stable at 5.8% in August 017, unchanged since May. Across the OECD area, 36.1 million people were unemployed, 3.5 million

More information

Global Competitiveness Index Rankings

Global Competitiveness Index Rankings APPENDIX B Global Competitiveness Index 2017 2018 Rankings The following pages report the GCI 2017 2018 rankings for the three subindexes (Table 1) and their corresponding pillars (Tables 2 4). Detailed

More information

giroflex 64 Stoll Giroflex AG

giroflex 64 Stoll Giroflex AG Over 1.5 million of the giroflex 64 have been sold worldwide. This kind of success is no coincidence this classic chair represents the unification of design and ergonomics at its highest level. The giroflex

More information

Regional and Suburban Transport

Regional and Suburban Transport Regional and Suburban Transport Autorail Grande Capacité France On behalf of the French Regions, the SNCF ordered 500 Autorails Grande Capacité (AGC) for suburban, regional or interregional services. The

More information

RPL Temperature Control

RPL Temperature Control RPL Temperature ontrol Ensure safety and guarantee... Hot and cold water circuits Temperature control of moulds on injection presses Easy circuit identification Thanks to the identification of sockets

More information

EFFICIENT. Prenosne baterije

EFFICIENT. Prenosne baterije KOCH, SERVISNA OPREMA, d.o.o. Špruha 42, SI-1236 Trzin Tel.: +386 1 56 44 770 Fax: +386 1 56 44 772 prodaja@koch.si aleksander.presekar@koch.si www.koch.si Prenosne baterije Portable power packs WORK EFFICIENT

More information

DEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887

DEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 DEUTSCHE NORM October 2003 Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 { EN ISO 3887 ICS 77.040.99 Stahl Bestimmung der Entkohlungstiefe (ISO 3887

More information

Hoshizaki America, Inc.

Hoshizaki America, Inc. Hoshizaki America, Inc. Self-Contained Crescent Cuber Models A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71260 Issued: 12-11-2006 CONTENTS Auxiliary Codes... 3 Note About Ordering

More information

HOSHIZAKI ICE DISPENSING BIN MODEL DB-200C (FINAL) PARTS LIST

HOSHIZAKI ICE DISPENSING BIN MODEL DB-200C (FINAL) PARTS LIST NO: 71012 ISSUED: SEPT. 6, 1989 REVISED: FEB. 25, 2002 HOSHIZAKI ICE DISPENSING BIN MODEL DB-200C (FINAL) PARTS LIST J-1 JULY 1989 J-2 OCTOBER 1989 K-1 DECEMBER 1989 K-2 SEPTEMBER 1990 A-0 MARCH 1991 A-1

More information

Automatic accesses for Public Transport infrastructures

Automatic accesses for Public Transport infrastructures Automatic accesses for Public Transport infrastructures Automatic doors Automatic doors Technology and manufacturing 00% Manusa & Experience Quality Service Manusa develops and manufactures all its products.

More information

Mechanical. Shaft handling. Pneumatic expansion shafts. Friction and knife shafts. and adapters. Expansion couplings

Mechanical. Shaft handling. Pneumatic expansion shafts. Friction and knife shafts. and adapters. Expansion couplings Pneumatic expansion shafts Mechanical expansion shafts Expansion couplings Expansion chucks and adapters Friction and knife shafts Shaft handling Expansion couplings E X P A N S I O N Pneumatic expansion

More information

Knife gate valve WB14

Knife gate valve WB14 Knife gate valve WB14 Data is only for informational purpose. All specifications are subject to change without notice. 1 2016-08-19 issue 10 Knife gate valve WB14 Stafsjö's knife gate valve WB14 is bi-directional

More information

INDUSTRIALL GLOBAL UNION FCA-CNH NETWORK MEETING March 2017 Detroit, US

INDUSTRIALL GLOBAL UNION FCA-CNH NETWORK MEETING March 2017 Detroit, US INDUSTRIALL GLOBAL UNION FCA-CNH NETWORK MEETING 14-16 March 2017 Detroit, US IG Metall Situation in the automotive industry 2016 2016 overview IG Metall The world automarket of passenger cars has increased

More information

Knife gate valve WB11

Knife gate valve WB11 Knife gate valve WB11 Data is only for informational purpose. All specifications are subject to change without notice. 1 2016-12-28 issue 13 Knife gate valve WB11 Stafsjö's knife gate valve WB11 is bi-directional

More information

Kernel Wt. 649,153, ,948, ,710, ,452, ,163, Crop Year 8/1-2/29 342,795,454 -2, ,935

Kernel Wt. 649,153, ,948, ,710, ,452, ,163, Crop Year 8/1-2/29 342,795,454 -2, ,935 Almond Industry Position Report 2015-2016 Crop Year Salable Forecast Million Lbs. 2015-2016 8/1-2/29 Kernel Wt. FEBRUARY 2016 2014-2015 8/1-2/28 Kernel Wt. % Change 1. Carryin August 1, 2015 2. Crop Receipts

More information

Film Capacitors for AC Filtering in Industrial Applications

Film Capacitors for AC Filtering in Industrial Applications EPCOS Product Brief 2017 Film Capacitors for AC Filtering in Industrial Applications EPCOS is known as one of the world s leading manufacturer of electronic components. Hardly any other supplier offers

More information

DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038

DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 DEUTSCHE NORM July 2004 DIN EN ISO 9038 { ICS 13.220.40; 87.040 Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 Prüfung der Weiterbrennbarkeit von Flüssigkeiten

More information

Pumps and Flow Measurement for the Polyurethanes Industry

Pumps and Flow Measurement for the Polyurethanes Industry Pumps and Flow Measurement for the Polyurethanes Industry 2 Pumps and flow measurement for the polyurethanes industry Content 3 Company 5 Gear Pumps for the Polyurethanes Industry 6 Pressure Relief Valves

More information