45mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 35 Supply

Size: px
Start display at page:

Download "45mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 35 Supply"

Transcription

1 330 S P E C I F I C A T I O N S 45mm English Metric Injection Unit Specifications A' A B A' A B Inj. Capacity, Max. GPPS oz gm Theoretical Disp in^ cm^ Max. Inj. Press. Note 1 psi 34,800 27,500 22,275 bar 2,400 1,896 1,536 Max. Inj. Rate Note 1 in^3/sec cm^3/sec Max. Inj. Speed, Note 1 in/sec mm/sec Max. Pack Press. psi 34,800 27,500 22,275 bar 2,400 1,896 1,536 Max. Pull Back Force lbs 17,000 17,000 17,000 N 75,620 75,620 75,620 Screw Stroke in mm Screw Dia. in mm Screw L/D Ratio 22:1 22.2:1 20:1 22:1 22.2:1 20:1 Screw Performance STD HTLS STD HTLS Screw Speed, Max. rpm rpm Screw Torque, Max. ft-lb Nm 860 1,150 Barrel Heat Control No. of Pyrometers (barrel/nozzle) 3/1 3/1 3/1 3/1 3/1 3/1 Total Heat Capacity kw kw Sled Pull-in Force ton 4.1 Tonf 3.7 Clamp Specifications Tonnage ton 330 Tonf 300 Maximum Daylight in 50 mm 1,270 Max./Min. Mold Height in 26.4/7.9 mm 670/200 Max. Mold Wt. lbs 8,300 kg 3,765 Max. Clamp Stroke in mm 600 Clamp Speed Euromap Dry Cycle Time sec < 2.5 sec < 2.5 Platen Size in x mm 1,030 x 1,030 Tie Bar Spacing in 27.6 x 27.6 mm 700 x 700 Tie Rod Diameter in 4.72 mm 120 Ejector Stroke in 7.87 mm 200 Max. Ejector Force ton 8.5 Tonf 7.7 Max. Eject Speed in/sec 10.4 mm/sec 265 Machine Specifications Length, Note 2 in mm 7,065 Width in 74.1 mm 1,881 Height in 90.5 mm 2,298 Centerline Ht. in 55.1 mm 1,400 Shipping Weight lbs 32,700 kg 14,832 Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power Machine kva 35 Supply Optional Core kva 11(10 Hp) or 16 (15 Hp) Capacity Max. Total Capacity kva 51 Machine Transformer Size kva 51 Machine Requirements Water (Feedthroat) Air Notes: 1) Limitations may apply in certain conditions 2) Working position with sled forward 4 50 psi cfm 10

2 P O W E R L I N E 330 S P E C I F I C A T I O N S 55mm English English Metric Injection Unit Specifications A B C A B C Inj. Capacity, Max. GPPS oz gm Theoretical Disp in^ cm^ ,000 Max. Inj. Press., Note 1 psi 27,500 19,700 17,000 bar 1,896 1,358 1,172 Max. Inj. Rate, Note 1 in^3/sec cm^3/sec Max. Inj. Speed, Note 1 in/sec mm/sec Max. Pack Press. psi 27,500 19,700 17,000 bar 1,896 1,358 1,172 Max. Pull Back Force lbs 17,000 17,000 17,000 N 75,620 75,620 75,620 Screw Stroke in mm Screw Dia. in mm Screw L/D Ratio 23.6:1 20: :1 20:1 18.6:1 Screw Performance Screw Speed, Max. rpm rpm Screw Torque, Max. ft-lb 1,350 1,350 1,350 Nm 1,830 1,830 1,830 Barrel Heat Control No. of Pyrometers (barrel/nozzle) 3/1 3/1 3/1 3/1 3/1 3/1 Total Heat Capacity kw kw Sled Pull-in Force ton 4.1 Tonf 3.7 Clamp Specifications Tonnage ton 330 Tonf 300 Maximum Daylight in 50 mm 1,270 Max./Min. Mold Height in 26.4/7.9 mm 670/200 Max. Mold Wt. lbs 8,300 kg 3,765 Max. Clamp Stroke in mm 600 Clamp Speed Euromap Dry Cycle Time sec < 2.5 sec < 2.5 Platen Size in x mm 1,030 x 1,030 Tie Bar Spacing in 27.6 x 27.6 mm 700 x 700 Tie Rod Diameter in 4.72 mm 120 Ejector Stroke in 7.87 mm 200 Max. Ejector Force ton 8.5 Tonf 7.7 Max. Eject Speed in/sec 10.4 mm/sec 265 Machine Specifications Length, Note 2 in mm 7,144 Width in 74.1 mm 1,881 Height in 90.5 mm 2,298 Centerline Ht. in 55.1 mm 1,400 Shipping Weight lbs 33,700 kg 15,286 Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power Machine kva 49 Supply Optional Core kva 11(10 Hp) or 16 (15 Hp) Capacity Max. Total Capacity kva 65 Machine Transformer Size kva Machine Requirements Water (Feedthroat) Air Notes: 1) Limitations may apply in certain conditions 2) Working position with sled forward 4 50 psi cfm

3 330 T E M P L A T E S 3687mm NPT Water Connections 623mm 24.5 Machine/Hopper From Side Of Base 424mm 16.7 Air Connection 1795mm 70.7 Outside 980mm 38.6 Outside 851m 33.5 Inside 687mm 27.0 Inside 3830mm mm mm mm 6.94 Air Connection From Base Side 25 Swivel For Feed Screw Removal 1527mm 60.1 Hopper 55mm 1179mm Hopper 45mm 3314mm Optional Movable Transformer 698mm mm 55.0 PLAN 1253mm 49.3 Opening 1685mm 66.3 Top Of Feed Throat 2298mm mm mm mm 15.2 Sled Stroke 2332mm mm mm mm mm mm 32.3 Top Of Base Optional Core Pull Unit 879mm mm mm mm mm; 7144mm mm Sled Forward 7529mm Including Sled Stroke NT330-55mm Shown ELEVATION Machine Length, Sled Forward 45mm 55mm ,065mm 7,144mm 12

4 P O W E R L I N E 330 T E M P L A T E S 1881mm mm mm 76.4 Robot Mtg 171mm 6.7 Mold Water 82mm 3.2 Mold Water 80mm mm 73.5 Top Of Strain Rod 689mm 27.1 Electrical Connect 139mm 5.5 Mold Water 50mm 2.0 Mold Water 612mm mm mm 3.0 Optional Core Pull Unit 175mm mm 49.3 CLAMP END INJECTION END 155.0mm mm mm mm mm mm mm mm mm mm 1.00 TYP 220.0mm 8.66 M16-6H (pitch=2.0mm Ref), 28.0 Deep (8) Places Optional Robot Mounting Plate Includes SPI Hole Pattern Inch Thread Ø 0.531, Thru UNC-2B, Thru (6) Places Robot Mounting Holes 240mm 9.4 M10mm 0.4 (4) Places Ø 108mm mm mm 4.00 TYP 177.8mm 7.00 TYP 13 ROBOT MOUNTING PATTERN FEED THROAT 55MM INJECTION UNIT

5 330 T E M P L A T E S mm mm 27.56mm 88.9mm mm 2.00 "A" Moving And Stationary Platens "B" Moving Platen "C" Moving Platen 700.0mm mm mm mm mm mm mm mm mm mm DIE SPACE 76.2mm mm mm mm mm mm Hole Description "A" UNC-2B 1.22" DP (108) Holes Each Platen "B" Ø27.0 Thru (12) Holes Corresponding Holes In K/O Ø0.562" Thru (12) Holes "C" Ø46.0 Thru (1) Hole Corresponding Hole In K/O UNC-2B Thru (1) Hole 426.1mm mm mm mm mm Mold Height Adjustment 200.0mm 7.87 Eject Stroke 197.0mm 7.76 Distance To K/O Bar Face At Max Eject Stroke 200.0mm 7.87 Min Mold Height 179.2mm mm W/O Robot Option 563.1mm Robot Option PLATEN Ø 120.0mm 4.72 Moving Platen 600.0mm Clamp Stroke Ø mm mm Max Daylight Stationary Platen 4.8mm 0.19 Nozzle Protrusion 14

Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 88 Supply

Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 88 Supply 750 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6

More information

72/96/130-70mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 91 Supply

72/96/130-70mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 91 Supply 935 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6

More information

30/40/55-70mm. Max. Total Capacity kva 83(25:1 L/D) or 93 (30:1 L/D) Machine Supply Transformer Size kva 93 Capacity Machine Requirements

30/40/55-70mm. Max. Total Capacity kva 83(25:1 L/D) or 93 (30:1 L/D) Machine Supply Transformer Size kva 93 Capacity Machine Requirements 440 S P E C I F I C A T I O N S 30/40/55-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 30 40 55 gm 850 1,134 1,559 Theoretical Disp in^3 55.8 74.5 99.2

More information

Technical Specifications

Technical Specifications All-Electric 55 Frame 21/24/29/34 oz Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 21 29 34 gm 595 822 963 Theoretical Disp in^3 37.7 52.6 61.1 cm^3 618 862 1,001 Max Pressure

More information

The ROBUST Performer

The ROBUST Performer 80 to 910 Ton The ROBUST Performer Energy Efficient Generous Specifications Robust & Reliable User Friendly Control The ROBUST Performer 3 Large Ram Diameter Provides Uniform Force Distribution across

More information

55, 90, 125, 140, 170, 225, 310, 400, 500 & 550 A NEW STANDARD IN TOGGLE TECHNOLOGY

55, 90, 125, 140, 170, 225, 310, 400, 500 & 550 A NEW STANDARD IN TOGGLE TECHNOLOGY 55, 90, 125, 140, 170, 225, 310, 400, 500 & 550 A NEW STANDARD IN TOGGLE TECHNOLOGY Energy Efficient Rugged & Reliable recise & Consistent Versatile & User Friendly Compact Mono Toggle Design Durable Mono-Toggle

More information

ALLROUNDER 520 E. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.

ALLROUNDER 520 E. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15. ALLROUNDER 520 E Distance between tie bars: 20.47 x 20.47 (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz MACHINE DIMENSIONS 520 E 78.74 53.15 33.46 4.72 12.99 15.75 51.18

More information

ALLROUNDER 570 A. Distance between tie bars: x (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.

ALLROUNDER 570 A. Distance between tie bars: x (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29. ALLROUNDER 570 A Distance between tie bars: 22.44 x 22.44 (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.8 oz MACHINE DIMENSIONS 570 A 78.82 55.43 33.46 330 17.24 88.39 1)

More information

Engel Injection Molding Machine VERTICAL CLAMP INSERT 330V/90 WP US. Data Sheet INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION

Engel Injection Molding Machine VERTICAL CLAMP INSERT 330V/90 WP US. Data Sheet INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION Engel Injection Molding Machine INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION CLAMP Clamp force US tons 90 Clamp opening force US tons 3.0 Clamp stroke (max.) inches 13.78 Mold height (min

More information

ALLROUNDER 470 E. Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.

ALLROUNDER 470 E. Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8. ALLROUNDER 470 E Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.2 oz MACHINE DIMENSIONS 470 E 51.24 33.44 max.16.34 4.72 80.71 83.62 15.75

More information

Technical Data Injection Moulding Machines Series CX PET Light

Technical Data Injection Moulding Machines Series CX PET Light 130 CX PET Light Technical Data Injection Moulding Machines Series CX PET Light CX KM 130-750 CX (PET) 4-fold Injection Moulding machine metric units KM130CX Clamp unit Clamping force kn 1300 Mould opening

More information

50-200Tons. Second Generation All-Electric injection molding machine. Victor Taichung - an established ISO-9001 & company

50-200Tons. Second Generation All-Electric injection molding machine. Victor Taichung - an established ISO-9001 & company 50-200Tons Second Generation All-Electric injection molding machine Victor Taichung - an established ISO-9001 & 01 company 50-200Tons Second Generation All-Electric injection molding machine New Centrally

More information

ALLROUNDER 275 V. Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz

ALLROUNDER 275 V. Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz ALLROUNDER 275 V Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz MACHINE DIMENSIONS 275 V 35.43 2.18 70.1 113.39 1) 119.1 2) 111.81 1) 115.95 2).57 75.1 31.5 35.43 min.35.43

More information

UNIT SPRINT 100 SPRINT 150 SPRINT 180

UNIT SPRINT 100 SPRINT 150 SPRINT 180 UNIT SPRINT 100 SPRINT 150 SPRINT 180 SPRINT 250 SPRINT 350 545 705 1480 2275 Screw Diameter mm 28 32 36 40 45 50 45 50 60 56 60 70 70 80 90 Injection Pressure bar 2344 1795 1420 2430 1920 1555 2160 1750

More information

Zhafir Venus Series. Specifications / International. Zhafir Venus. Series kN

Zhafir Venus Series. Specifications / International. Zhafir Venus. Series kN Zhafir Venus Series Zhafir Venus Series Specifications / International 4-8000kN ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail:

More information

Injection Mould Machine

Injection Mould Machine Injection Mould Machine PanAsia Exports (HK) Limited Room 1208-1209, B Block, Feng Xing Plaza, No. 242 Tian He Road, Tian He District, Guangzhou, 510620, China Tel: (8620) 28383510 Fax: (8620)28383516

More information

ALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.

ALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15. Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com 52 A Machine dimensions 78.8 53.7 33.44

More information

Specifications / International kN

Specifications / International kN ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail: contact@zhafir.com www.zhafir.com Zhafir Zeres Series NINGBO ZHAFIR PLASTICS

More information

ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.

ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29. Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7

More information

Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons.

Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons. Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons. Mechanical feature Clamping: Minimizing mold strain by flexible fixed platen and highly rigid clamping structure with ultra capability of self lock.

More information

ALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.

ALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3. Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35

More information

ALLROUNDER 320 C GOLDEN EDITION

ALLROUNDER 320 C GOLDEN EDITION Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions

More information

ALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800

ALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 ALLROUNDER 520 H Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 MACHINE DIMENSIONS 520 H 2002 1348 255 849 120 330 max. 385 438 507 800

More information

www.woojinplaimm.com TN-E series TN280E IH IH Injection Unit crew & barrel type A A B C crew diameter inch 1. 1.26 1.2 1.7 1.77 1.97 Injection pressure psi 17.60 870.2 8217.8 091.16 2. 288.6 Theoretical

More information

ALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800

ALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800 ALLROUNDER 570 E Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800 MACHINE DIMENSIONS 570 E 1900 850 150 330 520 1285 825 435 605 1000 280 5185

More information

ALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400

ALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400 ALLROUNDER 470 A Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP):, 290, 400 MACHINE DIMENSIONS 470 A 840 330 438 1302 2050 2124 1)2) 2139 3) 400 1109 max.

More information

Facts and figures ALLROUNDER 1500 T

Facts and figures ALLROUNDER 1500 T Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22

More information

Zhafir VenusⅡ/p Series

Zhafir VenusⅡ/p Series Zhafir VenusⅡ/p Series Zhafir Venus Series Packaging / International 10-3800kN ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 963 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412-1 E-Mail:

More information

R - Series Tons

R - Series Tons R VictorTaichung R - Series -1300 Tons Hybrid High-Performance Medium tonnage plastic injection molding machine to satisfy your energy saving and repeatability requirement. Victor Taichung - an established

More information

ALLROUNDER 170 S. Distance between tie bars: 170 x 170 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, 70

ALLROUNDER 170 S. Distance between tie bars: 170 x 170 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, 70 ALLROUNDER 1 S Distance between tie bars: 1 x 1 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, MACHINE DIMENSIONS 1 S 120 1130 850 min. max. 385 330 255 455 3) 1850 1880 385

More information

ECSXII. Smart All-Electric Molding Solutions. Reach for the impossible. Achieve the incredible. Watch the ECSXII video.

ECSXII. Smart All-Electric Molding Solutions.  Reach for the impossible. Achieve the incredible. Watch the ECSXII video. TOSHIBA MACHINE ECSXII Smart All-Electric Molding Solutions. www.toshiba-machine.com Watch the ECSXII video. u Reach for the impossible. Achieve the incredible. U.S.A. Specifications - Catalog #ECSXII

More information

www.woojinplai.com pecification TN 20E IE IE Injection Unit crew & Barrel Type A A B crew Diameter 28 2 6 0 Injection Pressure kg/cm 2 626 00 2687 2172 1719 Mpa.6. 26. 21.0 168.6 Holding Pressure kg/cm

More information

ALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100

ALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 ALLROUNDER 920 A Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 920 A 877 239 707 1100 2229 1207 1697 2671 max.430

More information

ALLROUNDER 820 A. Distance between tie bars: 820 x 820 mm Clamping force: 3700, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100

ALLROUNDER 820 A. Distance between tie bars: 820 x 820 mm Clamping force: 3700, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100 ALLROUNDER 820 A Distance between tie bars: 820 x 820 mm Clamping force: 3, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 820 A 875 567 707 1100 178 433 482 2355 625 2800 3) 7476

More information

Toggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving

Toggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving TE Toggle and Electric Type Injection Molding Machine series High Speed High Precision Energy Saving Machine series TB Hydraulic TH Hydraulic TN Hydraulic & All electric TE All electric VH Vertical hydraulic

More information

ALLROUNDER 520 A multi-component

ALLROUNDER 520 A multi-component Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component

More information

U.S.A. Specifications - Catalog #ECSX 3-15

U.S.A. Specifications - Catalog #ECSX 3-15 TOSHIBA MACHINE U.S.A. Specifications - Catalog #ECSX 3-15 SPECIFICATIONS This may look like one machine......but it is so versatile, with a greater range of shot sizes, you ll think it was triplets. It

More information

Haitian Partner: HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower Hing Fong RD Kwai Fong N.T

Haitian Partner: HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower Hing Fong RD Kwai Fong N.T HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20100805-EV NINGBO HAITIAN HUAYUAN

More information

UNP Series Pneumatic Power Clamp

UNP Series Pneumatic Power Clamp Features Conforms to Standards Blade and foot mounting Fully adjustable opening angle Opening angle can be set with or without air pressure Unique linkage design ensures positional repeatability Linear

More information

ALLROUNDER 470 S Multi-component

ALLROUNDER 470 S Multi-component Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions

More information

Haitian MarsⅡSeries. Specifications / International KN. Haitian Mars. Series

Haitian MarsⅡSeries. Specifications / International KN. Haitian Mars. Series Haitian MarsⅡSeries HITIN INTERNTIONL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HITIN HUYUN MCHINERY CO., LTD.

More information

Sub title. PR series (Toggle type) Servo Hybrid system

Sub title. PR series (Toggle type) Servo Hybrid system Sub title PR series (Toggle type) Servo Hybrid system PR Series Feature Improved reproducibility and handling by excellent position sensor of mold close/open Outstanding injection molding for thin and

More information

ALLROUNDER 920 S. Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600

ALLROUNDER 920 S. Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 ALLROUNDER 920 S Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 MACHINE DIMENSIONS 920 S 2425 4) 2530 5) 1670 4) 1697 5) 848 4) 878 5)

More information

ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.

ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800. Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885

More information

ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.

ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290. Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245

More information

ECSXII. Smart Electric Molding Solutions. Reach for the impossible. Achieve the incredible. Watch the ECSXII video.

ECSXII. Smart Electric Molding Solutions.  Reach for the impossible. Achieve the incredible. Watch the ECSXII video. TOSHIBA MACHINE ECSXII Smart Electric Molding Solutions. www.toshiba-machine.com Watch the ECSXII video. u Reach for the impossible. Achieve the incredible. U.S.A. Specifications - Catalog #ECSXII 7-17

More information

ALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.

ALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300. Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251

More information

ALLROUNDER 270 C GOLDEN EDITION

ALLROUNDER 270 C GOLDEN EDITION Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33

More information

ALLROUNDER 570 C GOLDEN EDITION

ALLROUNDER 570 C GOLDEN EDITION Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255

More information

ALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.

ALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100. Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191

More information

ALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400

ALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400 Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330

More information

ALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800

ALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800 Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330

More information

Haitian Jupiter JU/j Series

Haitian Jupiter JU/j Series HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD. Export Processing

More information

The ROBUST Performer

The ROBUST Performer Hydraulic Injection Moulding Machines Technology for Productivity Design Advantages & Features CLAMP CONTROLS Hollow Headless Ra with Mono Seal & No Pis Rings Large Prefill Designed for Fast Tonnage Build-up

More information

ALLROUNDER 720 S Multi-component

ALLROUNDER 720 S Multi-component Facts and figures ALLROUNDER 72 S Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 13, 21, 32 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 72 S Multi-component

More information

ALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877

More information

Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.

Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290. Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850

More information

ALLROUNDER 820 S Multi-component

ALLROUNDER 820 S Multi-component Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component

More information

Toggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving

Toggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving TE Toggle and Electric Type Injection Molding Machine series High Speed High Precision Energy Saving Machine series TB series 90-880 TH-S(D&B) series -4 TH-PET(D&B) series 3 TH-SMC series 220-4 DL-S series

More information

Haitian Jupiter JU/j Series Specifications

Haitian Jupiter JU/j Series Specifications Specifications HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD.

More information

- Injection rate cm 3 /s Max. injection speed mm /s Max. injection pressure MPa Max. injection holding pressu MPa - -

- Injection rate cm 3 /s Max. injection speed mm /s Max. injection pressure MPa Max. injection holding pressu MPa - - 1807731102 Other Screw diameter 68 75 83 83 90 100 100 110 Injection stroke 306 375 420 450 500 Theoretical injection capacity cm 3 1111 1656 2028 2272 2863 3534 3927 4752 Injection unit K600D L750D 2

More information

RS Series. For Volume Production of Thin Walled Containers, Industrial Containers, Wide Mouth Jars or Specialty Items

RS Series. For Volume Production of Thin Walled Containers, Industrial Containers, Wide Mouth Jars or Specialty Items www.rocheleautool.com RS Series Reciprocating Screw Blow Molding Machines For Volume Production of Thin Walled Containers, Industrial Containers, Wide Mouth Jars or Specialty Items RS-70 with Tail Puller

More information

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200 Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385

More information

ALLROUNDER 720 A Multi-component

ALLROUNDER 720 A Multi-component Facts and figures ALLROUNDER 72 A Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 8, 13, 21 horizontal 7, 17, 29, 4 vertical www.arburg.com 72 A Multi-component

More information

Specifications KN

Specifications KN Specifications 860-00 HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20170419-IV

More information

UNIT ARMOUR 50 CPVC ARMOUR 75 CPVC ARMOUR 100 CPVC ARMOUR 100 CPVC INJECTION UNIT

UNIT ARMOUR 50 CPVC ARMOUR 75 CPVC ARMOUR 100 CPVC ARMOUR 100 CPVC INJECTION UNIT UNIT ARMOUR 50 CPVC ARMOUR 75 CPVC ARMOUR 100 CPVC ARMOUR 100 CPVC 200 200 200 295 Screw Diameter 28 32 36 28 32 36 28 32 36 32 36 0 Injection Pressure bar 23 1795 120 23 1795 120 23 1795 120 2295 1815

More information

80 ~ 350 Tons LGH-D Series

80 ~ 350 Tons LGH-D Series 0 ~ 0 Tons LGH-D Series Featuring another technical innovation by LS The LGH-D Series, designed with LS s high technology, meets the demand for precision molding. Improved rigidity of the platen provides

More information

Facts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100.

Facts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100. Facts and figures ALLROUNDER 275 V Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP):, 100 www.arburg.com 275 V Installation dimensions 900 665 1782 2880 1) 3025 2)

More information

ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395

More information

BT SERIES www.borchenorthamerica.com TABLE OF CONTENTS BT SERIES ENERGY EFFICIENT. DURABLE. PRECISE. COST EFFECTIVE COMPANY BACKGROUND...5 CUSTOMER SERVICE...6 FEATURES...8 MAJOR HYDRAULIC/ELECTRIC COMPONENTS...9

More information

ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207

More information

820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )

820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) ) Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342

More information

Vertical Type Injection Molding Machine. series. Insert Molding. Automation Optimization. Minimize the spaced required for installation

Vertical Type Injection Molding Machine. series. Insert Molding. Automation Optimization. Minimize the spaced required for installation VH Vertical Type Injection Molding Machine series Insert Molding Automation Optimization Minimize the spaced required for installation Machine series TB series 90-880 TH-S(D&B) series 50-450 TH-PET(D&B)

More information

LS Hybrid Injection Molding Machine WIZ / X. 500 ~ 4500 USton Series.

LS Hybrid Injection Molding Machine WIZ / X. 500 ~ 4500 USton Series. W 2017-01 LS Hybrid Injection Molding Machine WIZ / X 500 ~ 4500 USton Series www.lsinjection.com Hybrid Injection Molding Machine Customer Focused Corporation The goal of LS injection molding machines

More information

Spritzgiessautomaten. Innovative into the future. Data and Equipment

Spritzgiessautomaten. Innovative into the future. Data and Equipment Spritzgiessautomaten Innovative into the future Data and Equipment Compact range BOY has become the specialist in the manufacturing of injection moulding machines with clamping forces up to 1,000 kn. BOY

More information

MID TONNAGE. Van Dorn Caliber

MID TONNAGE. Van Dorn Caliber MID TONNAGE Van Dorn Caliber V A N D O R N C A L I B E R THE POWER OF TWO Van Dorn and Demag Ergotech As a united force, Van Dorn and Demag Ergotech offer you, the customer, a number of advantages that

More information

PLASTICS INJECTION MOLDING MACHINE

PLASTICS INJECTION MOLDING MACHINE PLASTICS INJECTION MOLDING MACHINE MODEL VT - 60 VT - 80 VT - VT - 140 VT - 200 UNIT A B C A B C A B C A B C Screw Diameter 30 30 27 35 35 32 45 45 40 50 50 45 55 Screw L / D Ratio 18:01 18:01 20:01 18:01

More information

IntElect highly precise. Technical description

IntElect highly precise. Technical description IntElect highly precise Technical description Technical Data IntElect 0/3 Sumitomo (SHI) Demag IntElect 0/3 Model description IntElect 0/3 IntElect 0/380 00 0080 International size description Clamping

More information

ID-HM Series Minimum Space Less Hydraulic Oil Precise Molding

ID-HM Series Minimum Space Less Hydraulic Oil Precise Molding ID-HM Series Minimum Space Less Hydraulic Oil Precise Molding ID-HM Series ID-HM Series (Hydro-Mechanical Type) Hydro-mechanical injection molding machines provide FLEXIILITY, HIGH PRODUCTIVITY, and LOW

More information

DLseries. Compact Design. High Plasticizing Capacity. High Precision. Two Platen Direct Locking Type Injection Molding Machine

DLseries. Compact Design. High Plasticizing Capacity. High Precision. Two Platen Direct Locking Type Injection Molding Machine Two Platen Direct Locking Type Injection Molding Machine DLseries Compact Design High Plasticizing Capacity High Precision Machine series TB Hydraulic TH Hydraulic TN Hydraulic & ll electric TE ll electric

More information

MAGNA T SERVO. 500 to 5,500 kn

MAGNA T SERVO. 500 to 5,500 kn MAGNA T SERVO 500 to 5,500 kn A NEW STANDARD IN TOGGLE TECHNOLOGY Energy Efficient, Rugged & Reliable, Precise & Consistent, Versatile & User Friendly MAGNA T SERVO TOGGLE INJECTION MOLDING MACHINE Durable

More information

ALLROUNDER 1800 T. Table diameter: 1800 mm Clamping force: 2000, 2500, 3200 kn Injection unit (acc. to EUROMAP): 400, 800, 1300, 2100

ALLROUNDER 1800 T. Table diameter: 1800 mm Clamping force: 2000, 2500, 3200 kn Injection unit (acc. to EUROMAP): 400, 800, 1300, 2100 LLROUNDER 1 T Table diameter: 1 mm Clamping force: 2000, 2500, 3200 kn (acc. to EUROMP): 400,, 1300, 2100 MCHINE DIMENSIONS UP TO 2000 KN 1 T NCG 1150 997 4165 1) 4145 1) 2457 2110 4625 2) 4525 2) 1600

More information

MMX Series High Accuracy, Energy Saving Large Hydraulic Injection Molding Machines

MMX Series High Accuracy, Energy Saving Large Hydraulic Injection Molding Machines Mitsubishi Heavy Industries Technical Review Vol. 49 No. 4 (December 2012) 23 MMX Series High Accuracy, Energy Saving Large Hydraulic Injection Molding Machines Mitsubishi Heavy Industries Plastic Technology

More information

- Quick ejector Tie-in system

- Quick ejector Tie-in system - Quick ejector Tie-in system 3-Inch 2-Inch 1 3 8-Inch 1-Inch High Strength FasTie s U.S. Patent No. 6,379,072 FasTie s Description & Use In an injection molding press, the FasTie system quickly tiesin

More information

LS Hybrid Injection Molding Machine WIZ / X. 450 ~ 4000 Ton Series.

LS Hybrid Injection Molding Machine WIZ / X. 450 ~ 4000 Ton Series. W 2017-01 LS Hybrid Injection Molding Machine WIZ / X 450 ~ 4000 Ton Series www.lsinjection.com Hybrid Injection Molding Machine Customer Focused Corporation The goal of LS injection molding machines is

More information

HPVR-10 AXIAL PISTON PUMPS

HPVR-10 AXIAL PISTON PUMPS The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that

More information

HITECH HYDRAULICS. 70 Tons Tons 60 gm gm HYBRID SERVO INJECTION MOULDING MACHINE. SERIES CNC TURNED

HITECH HYDRAULICS. 70 Tons Tons 60 gm gm HYBRID SERVO INJECTION MOULDING MACHINE.   SERIES CNC TURNED HITECH HYDRAULICS www.hitechimm.com www.hitechgroup.org www.hitechhydraulics.com INJECTION MOULDING MACHINES COMPLETE HYDRAULIC SOLUTIONS CNC TURNED PRECISION P A R T S ik S D KINETIC SERVO DRIVE SINGLE

More information

ALLROUNDER CUBE 2900

ALLROUNDER CUBE 2900 Facts and figures ALLROUNDER CUBE 29 Distance between tie bars: 82 x 82 mm Clamping force: 29 kn Injection unit: 4, 8, 13, 21, 32 horizontal 7, 17, 29, 4, 8, 13 moving www.arburg.com CUBE 29 Machine dimensions

More information

Auto-Couplings. For Multiple Connection Systems. Auto-Couplings

Auto-Couplings. For Multiple Connection Systems. Auto-Couplings Auto-Couplings For Multiple Connection Systems Auto-Couplings 2 Auto-Couplings For Multiple Connection Systems Minimized Down-Time The automation process going on in most industries requires more sophisticated

More information

INQUIRY: HYROBOTICS CORP SAM LEE ( ) 5988 MID RIVER MALL DR. ST.CHARLES MO TEL : FAX :

INQUIRY: HYROBOTICS CORP SAM LEE (   ) 5988 MID RIVER MALL DR. ST.CHARLES MO TEL : FAX : INQUIRY: HYROBOTICS CORP SAM LEE ( Email : hanrobotic@msn.com ) 5988 MID RIVER MALL DR. ST.CHARLES MO 63304 TEL : 1-636-578-6059 FAX : 1-866-232-5594 1. Picker Body Installation 1-1. Picker Assembly. (Step

More information

INFINITE ENERGY 2-199

INFINITE ENERGY 2-199 3" AIR 3" FLUE RSUB-191 1 1/2" NPT 1" NPT 1 1/2" NPT FRONT VIEW Fuel Type Natural/Propane Gas Boiler FLA.92* Input BTU/hr. 200,000 / 59 kw Min. Gas Pressure Required 3" W.C.** Output BTU/hr. 183,600 /

More information

STANDARD FEATURES: Closed 9-1/4" Work Stations From Floor 42" Height w/o Die Block Hydraulics: Optional Lengths Available Weight (NET) lbs 2600

STANDARD FEATURES: Closed 9-1/4 Work Stations From Floor 42 Height w/o Die Block Hydraulics: Optional Lengths Available Weight (NET) lbs 2600 IRONWORKERS The Piranha Model P-50 features Automatic Urethane Hold Downs on the Punch Stripper and Bar, Plate and Angle Shear. This assures precise cuts and longer punch and blade life. Complete Punching

More information

Lot no. Description. Page 1 of 6

Lot no. Description. Page 1 of 6 Injection Moulding (Ends: 2016-07-19 14:00:00.0) An online auction of Various Plastic Injection Moulding Machines and an Ultrasonic Plastic Welder from different locations. Buyers Premium 15% VAT 20% Location

More information

4,500-33,000 kn. Zhafir Jenius Series. ZHAFIR PLASTICS MACHINERY Jubatus-Allee Ebermannsdorf Germany

4,500-33,000 kn. Zhafir Jenius Series. ZHAFIR PLASTICS MACHINERY Jubatus-Allee Ebermannsdorf Germany ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8 92263 Ebermannsdorf Germany contact@zhafir.com Zhafir Jenius Series Ningbo Zhafir Plastics Machinery Co.,Ltd Address: No.98, Guanhai Road, Chunxiao Town, Beilun

More information

Haitian Saturn Series

Haitian Saturn Series PLASTICS MACHINERY Haitian Saturn Series HT 07001_GB Haitian International Co., Ltd Unit 1105 Metroplaza tower 2, 223 Hing Fong Road Kwai Fong N. T haitian@mail.haitian.com Haitian Partner: NINGBO HAITIAN

More information

ALLROUNDER 520 A. Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP): 400, 800.

ALLROUNDER 520 A. Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP): 400, 800. A S GOLDEN EDITION V T K ALLROUNDER Technical data Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP):, 800 www.arburg.com Machine dimensions el. connection

More information

ALLROUNDER 470 A multi-component

ALLROUNDER 470 A multi-component A S GOLDEN EDITION V T K ALLROUNDER 470 A multi-component Technical data Tie bar distances: 470 x 470 mm Clamping forces: 800, 1000 kn Injection units (according to EUROMAP): 70,, 400 www.arburg.com 470

More information

High Speed, High Pressure Vane Motors

High Speed, High Pressure Vane Motors ENGINEERING DATA High Speed, High Pressure Vane Motors M - Motors 25M, 35M, 45M, 5M w w w. F l u i D y n e F P. c o m E m a i l : c s @ F l u i D y n e F P. c o m Dependable Versatile The M Motor is a

More information

The multi-function machine

The multi-function machine The multi-function machine Technical Description Multi Clamping unit asic hydraulic 500 kn 800 kn 1100 kn 18,5 kw 22 kw 30 kw Injection unit/ Distance Screw between tie bars V V V 370 x 370 120 200 22/25/30

More information

Plant Closed POLYVULC USA, INC Haining Rd., Vicksburg, Mississippi Miles West of Jackson, Mississippi

Plant Closed POLYVULC USA, INC Haining Rd., Vicksburg, Mississippi Miles West of Jackson, Mississippi Online Only Auction of Modern Rubber and Plastic Recycling Equipment Including 6 Davis Merritt Extrusion Recycling Line, Injection Molders to 1,000 Ton x 400 Oz., Vecoplan Shredders, Silos, Cracker Mill

More information