Spritzgiessautomaten. Innovative into the future. Data and Equipment
|
|
|
- Dominick Powell
- 5 years ago
- Views:
Transcription
1 Spritzgiessautomaten Innovative into the future Data and Equipment
2 Compact range BOY has become the specialist in the manufacturing of injection moulding machines with clamping forces up to 1,000 kn. BOY injection moulding machines excel in high precision, consistency, compact design, low energy consumption, cantilevered twoplaten clamping units, and the multitouch Procan ALPHA 2 control. Because of the very favourable price / performance ratio, we have been able to sell far more than 40,000 machines throughout the world since 196. The BOY brand is very well recognized worldwide and has been present on all continents for over 45 years. Type / Model BOY XS BOY A BOY 25 E BOY 25 E VH BOY35 E VH BOY 35 E BOY 50 E BOY 60 E BOY E BOY 100 E BOY A HV BOY 35 E HV BOY XS V BOY 25 E VV* BOY 35 E VV BOY 55 E VV BOY 2C XS * see special brochure 2
3 Euromap Size Injection unit for processing thermoplastics Screw diameter Screw L/Dratio Max. stroke volume (theoretical) Max. shot weight in PS Injection force Injection flow Max. spec. injection pressure Max. screw stroke Nozzle force / contact pressure Nozzle retraction stroke Screw torque Screw speed (infinitely variable) Screw pullback force Heating power (Nozzle + Cylinder) Hopper capacity mm cm 3 g kn g/s bar mm kn mm Nm U / min. kn W litre standard alternatively Clamping unit Clamping force Distance between tie bars Max. daylight between platen Max. opening stroke (adjustable) Min. mould height Mould opening force Mould closing force Ejector stroke (max.) Ejector force pushing / pulling kn mm mm mm mm kn kn mm kn (h x v) General Installed driving power / total power Duration of the dry cycle (EUROMAP 6) Hydraulic system pressure Oil tank capacity kw s mm bar litre Dimensions and weights Dimensions (LxWxH) / Footprint Total weight net (without oil) Total weight gross (without oil) Case dimensions (LxWxH) approx. mm / m² kg kg mm 3
4 EconPlast Highwear resistant / Thermoplastic Injection units (Euromap) Rigid PVC unit Silcone (LSR) Elastomer Thermoset Thermoplastic Max. inject. pressure (bar) Speed inject. pressure (bar) Speed injection flow (g/s) Injection flow (g/s) Max. stroke volume (cm³) Max. shot weight (g) Screw L/D Ratio Injection unit (SP) Screw Ø (mm) Machine type Standard Alternative equipment Not available Not fully suited for fiber reinforced materials 4
5 EconPlast Highwear resistant / Thermoplastic Injection units (Euromap) Rigid PVC unit Silcone (LSR) Elastomer Thermoset Thermoplastic Speed inject. pressure (bar) Speed injection flow (g/s) Max. inject. pressure (bar) Injection flow (g/s) Max. stroke volume (cm³) Max. shot weight (g) Screw L/D Ratio Screw Ø (mm) Machine type Injection unit (SP) Standard Alternative equipment Not available Not fully suited for fiber reinforced materials 5
6 EconPlast Highwear resistant / Thermoplastic Injection units (Euromap) Rigid PVC unit Elastomer Silcone (LSR) Thermoset Thermoplastic Speed inject. pressure (bar) Max. inject. pressure (bar) Injection flow (g/s) Speed injection flow (g/s) Max. shot weight (g) Screw L/D Ratio Max. stroke volume (cm³) Screw Ø (mm) Injection unit (SP) Machine type Standard Alternative equipment Not available Not fully suited for fiber reinforced materials 6
7 EconPlast Highwear resistant / Thermoplastic Injection units (Euromap) Rigid PVC unit Elastomer Silcone (LSR) Thermoset Thermoplastic Max. inject. pressure (bar) Speed inject. pressure (bar) Speed injection flow (g/s) Injection flow (g/s) Max. stroke volume (cm³) Max. shot weight (g) Screw L/D Ratio Injection unit (SP) Screw Ø (mm) Machine type Standard Alternative equipment Not available 7
8 BOY 2C XS unit 14 (not compatible to other units) 12 19,7 4,5 4,1 35, (75 bar) max ,9 6,2 5,6 35, (115 bar) max ,6,0 7,3 35, (150 bar) max ,0 / 4,35 ( V) 2 BOY 2C XS 1036 x 547 x / 0, / x 700 x 0 1) in standby position
9 BOY 2C XS unit ,5 4,1 2 11, (75 bar) max. Speed injection unit ,2 5, , (6 bar) max x , x ,5 3,0 / 5,45 ( V) 2 BOY 2C XS 1664 x 634 x / 1, / x 1000 x 10 1) in standby position 9
10 BOY 2C XS 1,4 1, , (1 bar) max. ( cm³) max. (100 cm³) Speed injection with unit 45 17,5 30,4 27, , (1 bar) max. ( cm³) max. (100 cm³) ,0 / 6,25 ( V) 2 3,0 / 6,55 ( V) 2 BOY 2C XS 1664 x 634 x / 1, / x 1000 x 10 1) in standby position 10
11 BOY 2C XS unit 56 1,4 1, , (1 bar) max. ( cm³) max. (100 cm³) unit 1 (standard) 17,5 30,4 27,7 7 29, (1 bar) max. ( cm³) max. (100 cm³) ,0 / 6,25 ( V) 2 3,0 / 6,55 ( V) 2 BOY 2C XS 1664 x 634 x / 1, / x 1000 x 10 1) in standby position 11
12 BOY 2C XS 43 39, , max. (100 cm³) max. 160 ( cm³) unit ,6 5,5 53, , max. (100 cm³) max. 160 ( cm³) ,3 76,4 69, , max. (100 cm³) max. 160 ( cm³) ,0 /, ( V) 2 BOY 2C XS 1664 x 634 x / 1, / x 1000 x 10 1) in standby position 12
13 BOY XS / BOY XS V ,7 4,5 4,1 35, (75 bar) max unit ,9 6,2 5,6 35, (115 bar) max ,6,0 7,3 35, (150 bar) max (diagonal ) (optional ) (optional 50) ,4 /,4 3,0 / 4,35 ( V) 1, BOY XS 14 x 5 x 10 1 / 0, / x 700 x 1500 BOY XS V 1100 x 5 x / 0, / x 700 x 0 1) max mm 2) max. 60 mm 13
14 BOY A / BOY A HV unit 11 unit 15 unit ,5 4,1 27, (75 bar) ,2 5,6 37, (6 bar) ,4 9,3 45, (1 bar) ,3 50 7,5 34,3 50 7,5 34,3 3 7, ,1/ ,1/ ,1/12 5,5 / 7,95 ( V) 1, ,5 / 7,95 ( V) 1, ,5 /,7 ( V) 1, BOY A 3 x 90 x 1679 / 2, / x 960 x 1600 BOY A HV 3 x 1040 x 2790 / 2, / x 1 x
15 BOY A / BOY A HV 1,4 1,6, (1 bar) , =3 13 unit 52 (standard) 17,5 30,4 27,7, / , = ,1/ ,1/12 5,5 /,7 ( V) 1, ,5 / 9,05 ( V) 1, BOY A 3 x 90 x 1679 / 2, / x 960 x ) when using a hydraulic motor with a pump volume of 100 cm³ 2) when using a hydraulic motor with a pump volume of 160 cm³ 15
16 BOY A / BOY A HV unit 52 (standard) 36,2 32,9, ,6 49,3 44,, / / , , x = ,3 64,3 5,5, / , ,1/ ,1/ ,1/12 5,5 / 11,3 ( V) 1, ,5 / 11,3 ( V) 1, ,5 / 11,3 ( V) 1, BOY A HV 3 x 1040 x 2790 / 2, / x 1 x ) when using a hydraulic motor with a pump volume of 100 cm³ 2) when using a hydraulic motor with a pump volume of 160 cm³ 16
17 BOY 25 E Speed injection with units 11 and ,5 4, (75 bar) ,2 5, (6 bar) x , x ,5 1,1/12 1,1/12 7,4 / 9,5 ( V) 1, ,4 / 9,5 ( V) 1, BOY 25 E 90 x 79 x 1660 / 1, 750 / x 960 x 10 17
18 BOY 25 E 39 1,4 1, (1 bar) Speed injection with unit 39 17,5 30,4 27, (130 bar) ,1/12 1,1/12 7,4 / 10, ( V) 1, ,4 / 10,95 ( V) 1, BOY 25 E 90 x 79 x 1660 / 1, 750 / x 960 x 10 1
19 BOY 25 E 56 unit 56 1,4 1, (1 bar) unit 69 (standard) 17,5 30,4 27, (130 bar) ,1/12 1,1/12 7,4 / 10, ( V) 1, ,4 / 10,95 ( V) 1, BOY 25 E 90 x 79 x 1660 / 1, 750 / x 960 x 10 19
20 BOY 25 E 43 39, / unit 2 2 1,6 5,5 53, / ,3 76,4 69, / ,1/12 1,1/12 1,1/12 7,4 / 13,2 ( V) 1, ,4 / 13,2 ( V) 1, ,4 / 13,2 ( V) 1, BOY 25 E 90 x 79 x 1660 / 1, 750 / x 960 x 10 1) when using a hydraulic motor with a pump volume of 100 cm³ / 130 bar 2) when using a hydraulic motor with a pump volume of 160 cm³ / 130 bar
21 BOY 25 E VV / BOY 25 E VH Speed injection with unit 11 and ,5 4, (75 bar) ,2 5, (6 bar) x / 7, x / 7,5 1,1/12 1,1/12 7,4 / 9,5 ( V) 1, ,4 / 9,5 ( V) 1, BOY 25 E VV 149 x 754 x / 1, / x 10 x ) VV machines 2) max mm 21
22 BOY 25 E VV / BOY 25 E VH 39 1,4 1, (1 bar) Speed injection with unit 39 17,5 30,4 27, (130 bar) / / 13 1,1/12 1,1/12 7,4 / 10, ( V) 1, ,4 / 10,95 ( V) 1, BOY 25 E VH 27 x 949 x 2 / 1, / x 10 x ) VV machines
23 BOY 25 E VV / BOY 25 E VH 56 unit 56 1,4 1, (1 bar) / unit 69 (standard) 17,5 30,4 27, (130 bar) / 13 1,1/12 1,1/12 7,4 / 10, ( V) 1, ,4 / 10,95 ( V) 1, BOY 25 E VV 149 x 754 x / 1, / x 10 x ) VV machines 2) max mm 23
24 BOY 25 E VV / BOY 25 E VH , / / 13 unit 2 2 1,6 5,5 53, / / ,3 76,4 69, / / 13 1,1/12 1,1/12 1,1/12 7,4 / 13,2 ( V) 1, ,4 / 13,2 ( V) 1, ,4 / 13,2 ( V) 1, BOY 25 E VH 27 x 949 x 2 / 1, / x 10 x ) when using a hydraulic motor with a pump volume of 100 cm³ / 130 bar 2) when using a hydraulic motor with a pump volume of 160 cm³ / 130 bar 3) VV machines
25 BOY 35 E / BOY 35 E HV unit ,2 5, , / 1 75 (6 bar) Speed injection unit 45 1,4 1, ,6 4 / (1 bar) ,5 30,4 27, / 1 1 (130 bar) ,5 / / / x ,5 21, x ,5 21,4 (130) (150) 23, / 15, (23, / 15,) (49,9 / 35,0) x ,5 21,4 7,4 / 9,5 ( V) 1, ,4 / 10, ( V) 1, ,4 / 10,95 ( V) 1,5 196 BOY 35 E 2364 x 19 x 1949 / 1, / x 960 x 10 BOY 35 E HV 2369 x 46 x / 2, / x 960 x 0 1) HV machines 2) max mm 25
26 BOY 35 E / BOY 35 E HV unit 56 1,4 1, , / (1 bar) ,5 / unit 1 17,5 30,4 27, / 1 1 (130 bar) / x ,5 21,4 1,1/ x ,5 21,4 1,1/12 7,4 / 10, ( V) 1, ,4 / 10,95 ( V) 1,5 196 BOY 35 E 2364 x 19 x 1949 / 1, / x 960 x 10 BOY 35 E HV 2369 x 46 x / 2, / x 960 x 0 1) HV machines 2) max mm 26
27 BOY 35 E / BOY 35 E HV unit 96 (standard) 2 1,6 43 5,5 39,1 53, / 4 4 / / / x = 50 / 4 / ,3 76,4 69, , / / / x ,5 21, x ,5 21,4 (130) (150) 23, / 15, (23, / 15,) (49,9 / 35,0) x ,5 21,4 7,4 / 13,2 ( V) 1, ,4 / 13,2 ( V) 1, ,4 / 13,2 ( V) 1,5 196 BOY 35 E 2364 x 19 x 1949 / 1, / x 960 x 10 BOY 35 E HV 2369 x 46 x / 2, / x 960 x 0 1) when using a hydraulic motor with a pump volume of 100 cm³ / 130 bar 2) when using a hydraulic motor with a pump volume of 160 cm³ / 130 bar 3) max mm 4) HV machines 27
28 BOY 35 E VV / BOY 35 E VH unit ,2 5, , / 5 75 (6 bar) ,4 1, ,6 4 / (1 bar) Speed injection unit 45 17,5 30,4 27, / 5 1 (130 bar) / 7,5 3 1 / 7, / 7, x ,5 21, x ,5 21,4 (130) (150) 23, / 15, (23, / 15,) (49,9 / 35,0) x ,5 21,4 7,4 / 9,5 ( V) 1, ,4 / 10, ( V) 1, ,4 / 10,95 ( V) 1,5 196 BOY 35 E VV 47 x 17 x / 1, / x 10 x 2 BOY 35 E VH 47 x 2 x 60 4 / 1, / x 10 x 2 1) VV machines 2) optional 100 mm larger 3) max mm 4) max. 35 mm 5) VH machines 2
29 BOY 35 E VV / BOY 35 E VH unit 56 1,4 1, , / (1 bar) / 7, unit 1 17,5 30,4 27, / 5 1 (130 bar) / 7, x ,5 21,4 1,1/ x ,5 21,4 1,1/12 7,4 / 10, ( V) 1, ,4 / 10,95 ( V) 1,5 196 BOY 35 E VV 47 x 17 x / 1, / x 10 x 2 BOY 35 E VH 47 x 2 x 60 4 / 1, / x 10 x 2 1) VV machines 2) optional 100 mm larger 3) max mm 4) max. 35 mm 5) VH machines 29
30 BOY 35 E VV / BOY 35 E VH 43 39, / / / 7, unit 96 (standard) 2 1,6 5,5 53, / / x = 50 3 / 7, ,3 76,4 69, , / / / 7, x ,5 21, x ,5 21,4 (130) (150) 23, / 15, (23, / 15,) (49,9 / 35,0) x ,5 21,4 7,4 / 13,2 ( V) 1, ,4 / 13,2 ( V) 1, ,4 / 13,2 ( V) 1,5 196 BOY 35 E VV 47 x 17 x / 1, / x 10 x 2 BOY 35 E VH 47 x 2 x 60 6 / 1, / x 10 x 2 1) when using a hydraulic motor with a pump volume of 100 cm³ / 130 bar 2) when using a hydraulic motor with a pump volume of 160 cm³ / 130 bar 3) VV machines 4) optional 100 mm larger 5) max mm 6) max. 35 mm 7) VH machines 25
31 BOY 50 E unit 56 unit 69 1,4 1, (1 bar) = ,5 30,4 27,7 7 75, / = x 335 0, x 335 0,4 (130) (150),4 / 13,5 (,4 / 13,5) (42,7 / 30) 11 / 14,25 ( V) 1, / 14,55 ( V) 1, x 1140 x 40 / 3,71 2 / x 1160 x 19 1) when using a hydraulic motor with a pump volume of 100 cm³ / 130 bar 2) when using a hydraulic motor with a pump volume of 160 cm³ / 130 bar 31
32 BOY 50 E 43 39,1 7 95, / unit 2 2 1,6 5,5 53, , / x = ,3 76,4 69, , / x 335 0, x 335 0,4 (130) (150),4 / 13,5 (,4 / 13,5) (42,7 / 30) x 335 0,4 11 / 16, ( V) 1, / 16, ( V) 1, / 16, ( V) 1, x 1140 x 40 / 3,71 2 / x 1160 x 19 1) when using a hydraulic motor with a pump volume of 100 cm³ / 130 bar 2) when using a hydraulic motor with a pump volume of 160 cm³ / 130 bar 32
33 BOY 55 E VV unit 56 unit 69 1,4 1, (1 bar) =3 17,5 30,4 27, / = x , x ,4 (130) (150),4 / 13,5 (,4 / 13,5) (42,7 / 30) 11 / 14,25 ( V) 1, / 14,55 ( V) 1, x 1110 x 31 3 / 3,33 25 / x 1350 x 2 1) when using a hydraulic motor with a pump volume of 162 cm³ 3) max mm 2) when using a hydraulic motor with a pump volume of 4 cm³ 4) optional 100 mm larger 33
34 BOY 55 E VV 43 39,1 7 95, / unit 2 2 1,6 5,5 53, , / , x = ,3 76,4 69, , / , x , x ,4 (130) (150),4 / 13,5 (,4 / 13,5) (42,7 / 30) x ,4 11 / 16, ( V) 1, / 16, ( V) 1, / 16, ( V) 1, x 1110 x 31 3 / 3,33 25 / x 1350 x 2 1) when using a hydraulic motor with a pump volume of 162 cm³ 3) max mm 2) when using a hydraulic motor with a pump volume of 4 cm³ 4) optional 100 mm larger 34
35 BOY 55 E VV 2,7 73,9 67, , / unit (standard) 32 96,5 7, , / ,7 29, x = x ,4 (130),4 / 13, x ,4 (130),4 / 13,5 11 / 1,7 ( V) 1, / 1,7 ( V) 1, x 1110 x 31 3 / 3,33 25 / x 1350 x 2 1) when using a hydraulic motor with a pump volume of 162 cm³ 3) max mm 2) when using a hydraulic motor with a pump volume of 4 cm³ 4) optional 100 mm larger 35
36 BOY 55 E VV 16,7 136,1 123, , / unit (standard) ,3 151, , / ,7 29, x = x ,4 (130),4 / 13, x ,4 (130),4 / 13,5 11 / 1,7 ( V) 1, / 1,7 ( V) 1, x 1110 x 31 3 / 3,33 25 / x 1350 x 2 1) when using a hydraulic motor with a pump volume of 162 cm³ 3) max mm 2) when using a hydraulic motor with a pump volume of 4 cm³ 4) optional 100 mm larger 36
37 BOY 60 E unit 56 unit 69 1,4 1, (1 bar) = ,5 30,4 27, / = x 335 0, x 335 0,4 (130) (150),4 / 13,5 (,4 / 13,5) (42,7 / 30) 11 / 14,25 ( V) 1, / 14,55 ( V) 1, x 1140 x 40 / 3,71 2 / x 1160 x 19 1) when using a hydraulic motor with a pump volume of 100 cm³ / 130 bar 2) when using a hydraulic motor with a pump volume of 160 cm³ / 130 bar 37
38 BOY 60 E 43 39,1 7 95, / unit 2 2 1,6 5,5 53, , / x = ,3 76,4 69, , / x 335 0, x 335 0,4 (130) (150),4 / 13,5 (,4 / 13,5) (42,7 / 30) x 335 0,4 11 / 16, ( V) 1, / 16, ( V) 1, / 16, ( V) 1, x 1140 x 40 / 3,71 2 / x 1160 x 19 1) when using a hydraulic motor with a pump volume of 100 cm³ / 130 bar 2) when using a hydraulic motor with a pump volume of 160 cm³ / 130 bar
39 BOY 60 E 2,7 73,9 67, , / unit (standard) 32 96,5 7, , / ,7 29, x = x 335 0, x 335 0,4 (130) (150),4 / 13,5 (,4 / 13,5) (42,7 / 30) 11 / 1,7 ( V) 1, / 1,7 ( V) 1, x 1140 x 40 / 3,71 2 / x 1160 x 19 1) when using a hydraulic motor with a pump volume of 162 cm³ / 130 bar 2) when using a hydraulic motor with a pump volume of 4 cm³ / 130 bar 39
40 BOY 60 E 16,7 136,1 123, , / unit (standard) ,3 151, , / ,7 29, x = x 335 0, x 335 0,4 (130) (150),4 / 13,5 (,4 / 13,5) (42,7 / 30) 11 / 1,7 ( V) 1, / 1,7 ( V) 1, x 1140 x 40 / 3,71 2 / x 1160 x 19 1) when using a hydraulic motor with a pump volume of 162 cm³ / 130 bar 2) when using a hydraulic motor with a pump volume of 4 cm³ / 130 bar 40
41 BOY E 2,7 73,9 67, , / unit 32 96,5 7, , / ,7 29, x = x (900) ,2 130 (150),4 / 13,5 (42,7 / 30) x (900) ,2 15 /,7 ( V) 2, /,7 ( V) 2, x 1214 x 2 / 4, / x 12 x 0 1) when using a hydraulic motor with a pump volume of 162 cm³ / 130 bar 2) when using a hydraulic motor with a pump volume of 4 cm³ / 130 bar 41
42 BOY E 16,7 136,1 123, , / unit ,3 151, , / ,7 29, x = x (900) ,2 130 (150),4 / 13,5 (42,7 / 30) x (900) ,2 15 /,7 ( V) 2, /,7 ( V) 2, x 1214 x 2 / 4, / x 12 x 0 1) when using a hydraulic motor with a pump volume of 162 cm³ / 130 bar 2) when using a hydraulic motor with a pump volume of 4 cm³ / 130 bar 42
43 BOY 100 E 2,7 73,9 67, , / unit 32 96,5 7, , / ,7 29, x = x (900) ,2 130 (150),4 / 13,5 (42,7 / 30) x (900) ,2 15 /,7 ( V) 2, /,7 ( V) 2, x 1214 x 2 / 4, / x 12 x 0 1) when using a hydraulic motor with a pump volume of 162 cm³ 2) when using a hydraulic motor with a pump volume of 4 cm³ 43
44 BOY 100 E 16,7 136,1 123, , / unit ,3 151, , / ,7 29, x = x (900) ,2 130 (150),4 / 13,5 (42,7 / 30) x (900) ,2 15 /,7 ( V) 2, /,7 ( V) 2, x 1214 x 2 / 4, / x 12 x 0 1) when using a hydraulic motor with a pump volume of 162 cm³ 2) when using a hydraulic motor with a pump volume of 4 cm³ 44
45 36,6 157, 143, , / with injection unit 370 (standard) ,3 214,7 195, , / x = ,9 2,5 255, , / x (900) , x (900) ,2 130 (150),4 / 13,5 (42,7 / 30) x (900) ,2 15 / 26,25 ( V) 2, / 26,25 ( V) 2, / 26,25 ( V) 2, x 1214 x 2 / 4, / x 12 x 0 1) when using a hydraulic motor with a pump volume of cm³ 2) when using a hydraulic motor with a pump volume of 34 cm³ 45
46 Equipment Injection unit Pivoting injection unit Preset screw speed values with ramping transition Cold start protection Number of set points of injection speed Number of set points of injection pressure Start of holding pressure dependent on hydraulic pressure, stroke and time Start of holding pressure, cavity pressuredependent Number of set points of holding pressure Production monitoring at start of holding pressure Closed loop control for the complete injection profile and back pressure Control for intrusioninjection PID microprocessorcontrolled heating zones for cylinder + nozzle set and temp. display Thermocouple controlled nozzle zone Hydraulically actuated needle shutoff nozzle (pneumatic for XSLSR) Slideaway for quick material change (25 VV / 35 VV / 55 VV without hopper) Automatic material loader / feeder Adjustable nozzle force Delayed nozzle retraction Servoelectric screw drive (separate feed line required) High wearresistant plasticizing units High wearresistant EconPlast unit Speed injection Clamping unit Reduced mould height by 50 mm Number of set points of mould closing speed Number of set points of mould opening speed Number of reopening attempts after mould closing Hydr. ejector with dig. adjustable pressure, speed, position + no. of strokes, intermediate stop position Hydraulic ejector with adjustable stroke mm (for XS = 50 mm) Hydraulic ejector with adjustable stroke 130 mm Hydraulic ejector with adjustable stroke 150 mm and 42,7 kn force Hydraulic unscrewing device, one direction of rotation with intermediate stop Hydraulic unscrewing device, two directions of rotation with intermediate stop and counter Core pull control with 4/3 way directional control valve and freely selectable operational programmes Injection compression (coining) and breathing (with mould degassing control) Hydraulic guard safety device Self adjusting mechanical drop bar safety system with electronic monitor Safety gate for handling devices Pneumatically / Electronically operated safety gate Selection flap Air ejection Mould lifting crane Simultaneous ejector movement (with double pump) Integrated sprue picker Standard Alternative Optional Not available 46
47 47 / XS E A AV A EV E EV EVV E E EV 2C XS A 50 / / / / 2 5
48 Equipment Electronics USB interface for access and data exchange Interface kit: Serial/Temperature device, USB/Printer and Ethernet OPC interface 4 freely programmable inputs/outputs Piece counter / interval signal Preselect cycle counter with auto shutoff Grounded socket outlet 230 V ~ / 10 A (XS = 6 A) Grounded socket outlet 230 V ~ / 10 A, switched CEE socket outlet V ~ / 16 A CEE socket outlet V ~ / 16 A, switched Socket distributor 3 x V ~ / 3 x 230 V ~, switched (separate feed line required) Switch cabinet ventilation Standardized interface for handling units (EUROMAP 67 / 12) Separate feeder (heating and motor current) 7day timer Additional temperature control Brush control Connector for safety switch to inhibit mould closing Integrated hot runner control, /16fold (separate feed line required) Air conditioning unit for control cabinet Alarm signal with sound Hydraulics Electronically controlled variable pump Servomotor pump drive (Servodrive) Oil preheating circuit automatic Oil temperatur gauge / Controlled oil cooling / Oil level indicator Oil level and temperature monitoring Optical oil filter contamination indicator Proportional action valve for the clamping unit Proportional valve with stroke feedback and positioning action for clamp unit General Cooling water distributor with electric shutoff valve for injection mould and feet throat 6 / zone water distributor Tool kit Spare parts package Oil filling Antivibration mounts Standard Alternatively Optional Not available 4
49 2C XS A A XS AV A E 25 EV E 35 EV 50 / 60 E 55 EV EVV / 100 E 49
50 Spritzgiessautomaten Ask for further information about our range! Visit our plant in NeustadtFernthal! Free injection trials can be held at any time in our modern Technology Centre. Modification in design and equipment reserved E 05/14 A Spritzgiessautomaten boy.de Dr. Boy GmbH & Co. KG Industriegebiet Neustadt / Wied Neschener Str NeustadtFernthal Germany Tel.: +49 (0) Fax: +49 (0) info@drboy.de
Spritzgiessautomaten NEW. Flexible injection unit for two-shot moulding
Spritzgiessautomaten NEW Flexible injection unit for two-shot moulding Two-shot injection moulding Effective and flexible The injection unit for the 2nd component is from the ultra compact BOY XS. It is
Specifications / International kN
ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail: contact@zhafir.com www.zhafir.com Zhafir Zeres Series NINGBO ZHAFIR PLASTICS
Zhafir Venus Series. Specifications / International. Zhafir Venus. Series kN
Zhafir Venus Series Zhafir Venus Series Specifications / International 4-8000kN ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail:
Zhafir VenusⅡ/p Series
Zhafir VenusⅡ/p Series Zhafir Venus Series Packaging / International 10-3800kN ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 963 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412-1 E-Mail:
ALLROUNDER 270 S Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70, 100, 170
A S GOLDEN EDITION V T ALLROUNDER Technical data Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70,, 170 www.arburg.com Machine dimensions 1850
A S GOLDEN EDITION V T C ALLROUNDER 270/320 C. Technical Data
A S GOLDEN EDITION V T C ALLROUNDER 270/320 C Technical Data Tie bar distances: 270 x 270 mm, 320 x 320 mm Clamping forces: 0, 400, 0, 600 kn Injection units (according to EUROMAP):, 2 www.arburg.com 270/320
Engel Injection Molding Machine VERTICAL CLAMP INSERT 330V/90 WP US. Data Sheet INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION
Engel Injection Molding Machine INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION CLAMP Clamp force US tons 90 Clamp opening force US tons 3.0 Clamp stroke (max.) inches 13.78 Mold height (min
The multi-function machine
The multi-function machine Technical Description Multi Clamping unit asic hydraulic 500 kn 800 kn 1100 kn 18,5 kw 22 kw 30 kw Injection unit/ Distance Screw between tie bars V V V 370 x 370 120 200 22/25/30
The ROBUST Performer
80 to 910 Ton The ROBUST Performer Energy Efficient Generous Specifications Robust & Reliable User Friendly Control The ROBUST Performer 3 Large Ram Diameter Provides Uniform Force Distribution across
Haitian Jupiter JU/j Series
HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD. Export Processing
Technical Data Injection Moulding Machines Series CX PET Light
130 CX PET Light Technical Data Injection Moulding Machines Series CX PET Light CX KM 130-750 CX (PET) 4-fold Injection Moulding machine metric units KM130CX Clamp unit Clamping force kn 1300 Mould opening
ALLROUNDER 470 A multi-component
A S GOLDEN EDITION V T K ALLROUNDER 470 A multi-component Technical data Tie bar distances: 470 x 470 mm Clamping forces: 800, 1000 kn Injection units (according to EUROMAP): 70,, 400 www.arburg.com 470
MAGNA T SERVO. 500 to 5,500 kn
MAGNA T SERVO 500 to 5,500 kn A NEW STANDARD IN TOGGLE TECHNOLOGY Energy Efficient, Rugged & Reliable, Precise & Consistent, Versatile & User Friendly MAGNA T SERVO TOGGLE INJECTION MOLDING MACHINE Durable
ALLROUNDER 520 A. Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP): 400, 800.
A S GOLDEN EDITION V T K ALLROUNDER Technical data Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP):, 800 www.arburg.com Machine dimensions el. connection
Sub title. PR series (Toggle type) Servo Hybrid system
Sub title PR series (Toggle type) Servo Hybrid system PR Series Feature Improved reproducibility and handling by excellent position sensor of mold close/open Outstanding injection molding for thin and
Haitian Saturn Series
PLASTICS MACHINERY Haitian Saturn Series HT 07001_GB Haitian International Co., Ltd Unit 1105 Metroplaza tower 2, 223 Hing Fong Road Kwai Fong N. T haitian@mail.haitian.com Haitian Partner: NINGBO HAITIAN
ALLROUNDER 275 V. Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz
ALLROUNDER 275 V Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz MACHINE DIMENSIONS 275 V 35.43 2.18 70.1 113.39 1) 119.1 2) 111.81 1) 115.95 2).57 75.1 31.5 35.43 min.35.43
ALLROUNDER 170 S. Distance between tie bars: 170 x 170 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, 70
ALLROUNDER 1 S Distance between tie bars: 1 x 1 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, MACHINE DIMENSIONS 1 S 120 1130 850 min. max. 385 330 255 455 3) 1850 1880 385
ALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800
ALLROUNDER 520 H Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 MACHINE DIMENSIONS 520 H 2002 1348 255 849 120 330 max. 385 438 507 800
Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.
Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850
ALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400
ALLROUNDER 470 A Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP):, 290, 400 MACHINE DIMENSIONS 470 A 840 330 438 1302 2050 2124 1)2) 2139 3) 400 1109 max.
ALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800
ALLROUNDER 570 E Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800 MACHINE DIMENSIONS 570 E 1900 850 150 330 520 1285 825 435 605 1000 280 5185
4,500-33,000 kn. Zhafir Jenius Series. ZHAFIR PLASTICS MACHINERY Jubatus-Allee Ebermannsdorf Germany
ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8 92263 Ebermannsdorf Germany contact@zhafir.com Zhafir Jenius Series Ningbo Zhafir Plastics Machinery Co.,Ltd Address: No.98, Guanhai Road, Chunxiao Town, Beilun
ALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100
ALLROUNDER 920 A Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 920 A 877 239 707 1100 2229 1207 1697 2671 max.430
ALLROUNDER 820 A. Distance between tie bars: 820 x 820 mm Clamping force: 3700, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100
ALLROUNDER 820 A Distance between tie bars: 820 x 820 mm Clamping force: 3, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 820 A 875 567 707 1100 178 433 482 2355 625 2800 3) 7476
IntElect highly precise. Technical description
IntElect highly precise Technical description Technical Data IntElect 0/3 Sumitomo (SHI) Demag IntElect 0/3 Model description IntElect 0/3 IntElect 0/380 00 0080 International size description Clamping
Facts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100.
Facts and figures ALLROUNDER 275 V Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP):, 100 www.arburg.com 275 V Installation dimensions 900 665 1782 2880 1) 3025 2)
Spritzgiessautomaten. Servo Drive
Spritzgiessautomaten ( Servo Drive The right response to rising electricity prices is energy efficiency Annegret-Cl. Agricola / Department Head of the German Energy Agency High-tech solutions should not
Modularity with a highperformance
Ace is a precision, high quality injection moulding machine made by TOSHIBA MACHINE. Ace connotes to accomplish a task with complete success. Modularity with a highperformance profile: Ace GenXt 400 to
MacroPower MC t The flexible large-molding machine. world of innovation
400 2000 t The flexible large-molding machine world of innovation MacroPower MULTI-COMPONENT SERIES Extra functionality and more freedom for design COMBIMOULD is the multi-component technology from WITTMANN
Haitian Partner: HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower Hing Fong RD Kwai Fong N.T
HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20100805-EV NINGBO HAITIAN HUAYUAN
ALLROUNDER 470 S Multi-component
Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions
ALLROUNDER 520 A multi-component
Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component
ALLROUNDER 920 S. Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600
ALLROUNDER 920 S Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 MACHINE DIMENSIONS 920 S 2425 4) 2530 5) 1670 4) 1697 5) 848 4) 878 5)
ALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800
Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330
ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.
Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885
ALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400
Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330
ALLROUNDER 1800 T. Table diameter: 1800 mm Clamping force: 2000, 2500, 3200 kn Injection unit (acc. to EUROMAP): 400, 800, 1300, 2100
LLROUNDER 1 T Table diameter: 1 mm Clamping force: 2000, 2500, 3200 kn (acc. to EUROMP): 400,, 1300, 2100 MCHINE DIMENSIONS UP TO 2000 KN 1 T NCG 1150 997 4165 1) 4145 1) 2457 2110 4625 2) 4525 2) 1600
ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.
Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245
ALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.
Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251
ALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.
Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191
Toggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving
TE Toggle and Electric Type Injection Molding Machine series High Speed High Precision Energy Saving Machine series TB Hydraulic TH Hydraulic TN Hydraulic & All electric TE All electric VH Vertical hydraulic
VM R t CM 40 t VM t. Flexible, automated production with ultimate precision. Technology working for you.
VM R 40 270 t CM 40 t VM 60 200 t Flexible, automated production with ultimate precision Technology working for you. Special features and benefits of the VM R series 40 270 t The rotary table machine series
Facts and figures ALLROUNDER 1500 T
Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22
TM Series t. Approved precision. Technology working for you.
TM Series 180 500 t Approved precision Technology working for you. Special features and benefits of the TM Series 180 500 t The TM Series with approved precision to business success The compact power packages
80 ~ 350 Tons LGH-D Series
0 ~ 0 Tons LGH-D Series Featuring another technical innovation by LS The LGH-D Series, designed with LS s high technology, meets the demand for precision molding. Improved rigidity of the platen provides
ALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877
- Injection rate cm 3 /s Max. injection speed mm /s Max. injection pressure MPa Max. injection holding pressu MPa - -
1807731102 Other Screw diameter 68 75 83 83 90 100 100 110 Injection stroke 306 375 420 450 500 Theoretical injection capacity cm 3 1111 1656 2028 2272 2863 3534 3927 4752 Injection unit K600D L750D 2
ALLROUNDER 520 E. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.
ALLROUNDER 520 E Distance between tie bars: 20.47 x 20.47 (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz MACHINE DIMENSIONS 520 E 78.74 53.15 33.46 4.72 12.99 15.75 51.18
ALLROUNDER 470 E. Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.
ALLROUNDER 470 E Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.2 oz MACHINE DIMENSIONS 470 E 51.24 33.44 max.16.34 4.72 80.71 83.62 15.75
PLASTICS INJECTION MOLDING MACHINE
PLASTICS INJECTION MOLDING MACHINE MODEL VT - 60 VT - 80 VT - VT - 140 VT - 200 UNIT A B C A B C A B C A B C Screw Diameter 30 30 27 35 35 32 45 45 40 50 50 45 55 Screw L / D Ratio 18:01 18:01 20:01 18:01
ALLROUNDER 270 C GOLDEN EDITION
Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33
ALLROUNDER 570 C GOLDEN EDITION
Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255
ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200
Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385
ALLROUNDER 720 S Multi-component
Facts and figures ALLROUNDER 72 S Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 13, 21, 32 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 72 S Multi-component
ALLROUNDER 720 A Multi-component
Facts and figures ALLROUNDER 72 A Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 8, 13, 21 horizontal 7, 17, 29, 4 vertical www.arburg.com 72 A Multi-component
ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395
ALLROUNDER 820 S Multi-component
Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component
ALLROUNDER 570 A. Distance between tie bars: x (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.
ALLROUNDER 570 A Distance between tie bars: 22.44 x 22.44 (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.8 oz MACHINE DIMENSIONS 570 A 78.82 55.43 33.46 330 17.24 88.39 1)
R - Series Tons
R VictorTaichung R - Series -1300 Tons Hybrid High-Performance Medium tonnage plastic injection molding machine to satisfy your energy saving and repeatability requirement. Victor Taichung - an established
Technical Data Concept and System 25/280
Technical Data Concept and System 25/ Demag Plastics Group Concept and System 25/ Model description 25/-35 25/-80 25/-120 International size description 250-35 250-80 250-120 Clamping unit 25/ Clamping
ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207
820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )
Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342
ROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES
ROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES ROMI Industrial Complex in Santa Bárbara d Oeste - SP, Brazil INNOVATION + QUALITY Romi: Since 1930 producing high technology.
ALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.
Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35
Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons.
Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons. Mechanical feature Clamping: Minimizing mold strain by flexible fixed platen and highly rigid clamping structure with ultra capability of self lock.
ALLROUNDER CUBE 2900
Facts and figures ALLROUNDER CUBE 29 Distance between tie bars: 82 x 82 mm Clamping force: 29 kn Injection unit: 4, 8, 13, 21, 32 horizontal 7, 17, 29, 4, 8, 13 moving www.arburg.com CUBE 29 Machine dimensions
Haitian Jupiter JU/j Series Specifications
Specifications HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD.
Technical Specifications
All-Electric 55 Frame 21/24/29/34 oz Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 21 29 34 gm 595 822 963 Theoretical Disp in^3 37.7 52.6 61.1 cm^3 618 862 1,001 Max Pressure
50-200Tons. Second Generation All-Electric injection molding machine. Victor Taichung - an established ISO-9001 & company
50-200Tons Second Generation All-Electric injection molding machine Victor Taichung - an established ISO-9001 & 01 company 50-200Tons Second Generation All-Electric injection molding machine New Centrally
30/40/55-70mm. Max. Total Capacity kva 83(25:1 L/D) or 93 (30:1 L/D) Machine Supply Transformer Size kva 93 Capacity Machine Requirements
440 S P E C I F I C A T I O N S 30/40/55-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 30 40 55 gm 850 1,134 1,559 Theoretical Disp in^3 55.8 74.5 99.2
BT SERIES www.borchenorthamerica.com TABLE OF CONTENTS BT SERIES ENERGY EFFICIENT. DURABLE. PRECISE. COST EFFECTIVE COMPANY BACKGROUND...5 CUSTOMER SERVICE...6 FEATURES...8 MAJOR HYDRAULIC/ELECTRIC COMPONENTS...9
ALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.
Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com 52 A Machine dimensions 78.8 53.7 33.44
45mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 35 Supply
330 S P E C I F I C A T I O N S 45mm English Metric Injection Unit Specifications A' A B A' A B Inj. Capacity, Max. GPPS oz 8 11 13 gm 226 312 368 Theoretical Disp in^3 15.3 19.4 24.0 cm^3 251 318 393
Toggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving
TE Toggle and Electric Type Injection Molding Machine series High Speed High Precision Energy Saving Machine series TB series 90-880 TH-S(D&B) series -4 TH-PET(D&B) series 3 TH-SMC series 220-4 DL-S series
ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.
Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7
The cold runner that matches your silicone.
The cold runner that matches your silicone. Industry-specific solutions for Automotive I Consumer I Electrical I Medical I Packaging GÜNTHER Heisskanaltechnik Passion for (Cold Runner) Technology Liquid
Instruction Manual Automatic Injection Moulding Machine
Englisch Instruction Manual Automatic Injection Moulding Machine BOY 22AVV-VH 22A VH 22A VV Dr. Boy GmbH & Co. KG Spritzgiessautomaten Neschener Straße 6 D-53577 Neustadt / Fernthal Telefon: 02683 / 3070
Haitian JupiterⅡ Series
Haitian JupiterⅡ Series HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 level 11 Metroplaza Tower 3 Hing fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY
MacroPower t. MacroPower Series The new benchmark for large machines. Technology working for you.
MacroPower 400 1100 t MacroPower Series The new benchmark for large machines Technology working for you. MacroPower Series The new benchmark for large machines MacroPower Series The new benchmark for large
Facts and figures MULTILIFT V 6
Facts and figures MULTILIFT V 6 www.arburg.com MULTILIFT V 6 Technical data F Stroke X-axis 3) Stroke Z-axis 1) Clamping face fixed mould platen E A K 4) Stroke Y axis 2) D 2) 156 B 4) C 2)4) 123 P 1)
ALLROUNDER 320 C GOLDEN EDITION
Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions
72/96/130-70mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 91 Supply
935 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
Injection Mould Machine
Injection Mould Machine PanAsia Exports (HK) Limited Room 1208-1209, B Block, Feng Xing Plaza, No. 242 Tian He Road, Tian He District, Guangzhou, 510620, China Tel: (8620) 28383510 Fax: (8620)28383516
e-motion TL All-electric, tie-bar-less
e-motion TL All-electric, tie-bar-less ENGEL e-motion TL generously dimensioned, barrier-free mould mounting surface excellent platen parallelism encapsulated toggle levers perfect clamping force distribution
ENGEL e-motion TL. All-electric, tie-bar-less. be the first.
ENGEL e-motion TL All-electric, tie-bar-less be the first. ENGEL e-motion TL generously dimensioned, barrier-free mould mounting surface excellent platen parallelism encapsulated toggle levers perfect
DLseries. Compact Design. High Plasticizing Capacity. High Precision. Two Platen Direct Locking Type Injection Molding Machine
Two Platen Direct Locking Type Injection Molding Machine DLseries Compact Design High Plasticizing Capacity High Precision Machine series TB Hydraulic TH Hydraulic TN Hydraulic & ll electric TE ll electric
Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 88 Supply
750 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated 2-way actuator
www.woojinplaimm.com TN-E series TN280E IH IH Injection Unit crew & barrel type A A B C crew diameter inch 1. 1.26 1.2 1.7 1.77 1.97 Injection pressure psi 17.60 870.2 8217.8 091.16 2. 288.6 Theoretical
U.S.A. Specifications - Catalog #ECSX 3-15
TOSHIBA MACHINE U.S.A. Specifications - Catalog #ECSX 3-15 SPECIFICATIONS This may look like one machine......but it is so versatile, with a greater range of shot sizes, you ll think it was triplets. It
www.woojinplai.com pecification TN 20E IE IE Injection Unit crew & Barrel Type A A B crew Diameter 28 2 6 0 Injection Pressure kg/cm 2 626 00 2687 2172 1719 Mpa.6. 26. 21.0 168.6 Holding Pressure kg/cm
Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled
Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Bolt shut-off with integrated 2-way actuator pneumatically
OUR HEADQUARTERS. The only name that matters for injection and compression moulding machines. UK Slovakia Taiwan RUBBER INJECTION MACHINE SERIES
RUBBER INJECTION MACHINE SERIES OUR HEADQUARTERS UK Slovakia Taiwan The only name that matters for injection and compression moulding machines www.panstone.eu www.panstone.eu Tel: +44 (0) 978 476 Email:
Vertical Type Injection Molding Machine. series. Insert Molding. Automation Optimization. Minimize the spaced required for installation
VH Vertical Type Injection Molding Machine series Insert Molding Automation Optimization Minimize the spaced required for installation Machine series TB series 90-880 TH-S(D&B) series 50-450 TH-PET(D&B)
MID TONNAGE. Van Dorn Caliber
MID TONNAGE Van Dorn Caliber V A N D O R N C A L I B E R THE POWER OF TWO Van Dorn and Demag Ergotech As a united force, Van Dorn and Demag Ergotech offer you, the customer, a number of advantages that
Gated and assembled in one moulding cycle
Customer information from EWIKON Heißkanalsysteme GmbH Gated and assembled in one moulding cycle Tailored hot runner solution for a demanding -component mould concept Pages - 5 Processing of sensitive
ECSXII. Smart Electric Molding Solutions. Reach for the impossible. Achieve the incredible. Watch the ECSXII video.
TOSHIBA MACHINE ECSXII Smart Electric Molding Solutions. www.toshiba-machine.com Watch the ECSXII video. u Reach for the impossible. Achieve the incredible. U.S.A. Specifications - Catalog #ECSXII 7-17
SE-DUZ Direct-Drive All-Electric Series
SE-DUZ Direct-Drive All-Electric Series SE-DUZ Series Direct-Drive All-Electrics Low-inertia, high-performance direct-drive motors for plasticizing, injection, clamping and ejection New PC-based control
Facts and figures MULTILIFT SELECT 6
Facts and figures MULTILIFT SELECT 6 www.arburg.com MULTILIFT SELECT 6 Technical data Stroke X-axis min. 100 Stroke Z-axis Clamping face, fixed mould platen 190 A D K Stroke Y axis 156 B 2) C 123 P G L