Parts Manual. English

Transcription

1 Parts Manual / W21K / W21SK / W21H / W21SBK / W53SBEK / W53SE / W21SKC / W21SBKC / W21SBHC Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English

2 MODEL NUMBER SERIAL NUMBER DATE PURCHASED DEALER ADDRESS NOTES: 2008 HTC All rights reserved. Beatrice, NE. Printed in U.S.A.

3 CONTENTS CHASSIS / FRAME...4 WHEELS & TIRES MODEL ONLY...6 SELF PROPELLED...8 PUSH...10 HANDLE & CONTROLS SELF PROPELLED...12 BLADE, BRAKE, CLUTCH (BBC)...16 CUTTING EQUIPMENT...20 TRANSMISSION...24 ENGINE PLATE KAWASAKI ZONE...26 KAWASAKI BBC...28 HONDA BBC...30 HONDA ZONE...32 DECALS...34 ACCESSORIES...36 MULCH KIT (BRAKE)...36 MULCH KIT (BBC)...36 NOTE: ALL FASTENERS ARE GRADE 5 UNLESS OTHERWISE SPECIFIED.

4 CHASSIS / FRAME Husqvarna

5 CHASSIS / FRAME ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION HCS ¼-20 x NUT ¼-20, KRLD, SPEC DECK W/DECALS SADDLE, TOP BRACKET, DECK BELT SHIELD FLAP ROD DISCHARGE FLAP ENGINE GUARD HINGE ROD CHUTE BOTTOM RHSNB 5 /16-18 x 3¼ SPRING, TORSION HANDLE BRACE, RT HANDLE BRACE, LT GRASS BAG GRASS BAG MODELS ONLY SCREW ¼-14 x ½, THD FRM REAR FLAP BAG FRAME NUT ¼-20 HEX NYLOC PIN COTTER, 3 /32 x ¾ WASHER ¼ HCS 5 /16-18 x ¾ HCS 5 /16-18 x HCS ¼-20 x HCS 5 /16-18 x HCS ¼-20 x ¾ WASHER ¼ HCS ¼-20 x 1 ½ NUT 5 /16-18 HEX NYLOC Husqvarna - 5

6 WHEELS & TIRES MODEL ONLY Husqvarna

7 WHEELS & TIRES ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION WHEEL ASSEM, LT WHEEL ASSEM, RT FRONT DECK PLATE, LT FRONT PLATE, LT FRONT DECK PLATE, RT FRONT PLATE, RT SHOULDER BOLT LEVER WASHER 3 /8, SPEC WASHER AXLE BUSHING WASHER 3 /8 SPLT LOCK NUT 5 /16-18, CENTER LOCK WASHER 5 /16, SAE RHSNB 5 /16-18 x 5 / TIRE 9" RT TIRE 9" LT HCS 3 /8-16 x 1¼ REAR WHEEL MOUNT, LT REAR WHEEL MOUNT, RT LEVER HCS 3 /8-16 x WHEEL PLATE 24.. NOT SHOWN BEARING, WHEEL Husqvarna -

8 WHEELS & TIRES SELF PROPELLED Husqvarna

9 WHEELS & TIRES ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION WHEEL ASSEM, LT WHEEL ASSEM, RT FRONT DECK PLATE, LT FRONT PLATE, LT FRONT DECK PLATE, RT FRONT PLATE, RT SHOULDER BOLT LEVER WASHER 3 /8, SPEC WHEEL PLATE, FRONT WASHER AXLE BUSHING WASHER 3 /8 SPLT LOCK NUT 5 /16-18, CENTER LOCK WASHER 5 /16, SAE HCS 3 /8-16 x 1¼ RHSNB 5 /16-18 x 5 / TIRE 9" RT TIRE 9" LT WHEEL MOUNT, LT WHEEL MOUNT, RT OUTER WHEEL PLATE, LT OUTER WHEEL PLATE, RT PINION GEAR, 11 TOOTH DRIVEN GEAR, 45 TOOTH BUSHING BEARING, TRANS SHAFT DEBRIS GUARD RETAINING RING, ½, EXT LEVER ZERK, 3 /16, DRIVE IN SPACER, WASHER SCREW ¼-20 x 5 /8, SLF TAP SCREW #10-24 x ½ SLT HEX NOT SHOWN BEARING, WHEEL Husqvarna - 9

10 HANDLE & CONTROLS 11 PUSH MODEL Husqvarna

11 HANDLE & CONTROLS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION HANDLE BAIL CABLE, THROTTLE HCS 3 /8-16 x ¾ HCS 3 /8-16 x / ROPE GUIDE NUT 3 /8-16 HEX NYLOC HCS M6-1 x 0 GR CABLE, ZONE GRIP, HANDLE DECAL, STOP SIGN WASHER 5 /16 WAVE CLIP Husqvarna - 11

12 HANDLE & CONTROLS SELF PROPELLED MODELS , , Husqvarna

13 HANDLE & CONTROLS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION HANDLE BAIL, GROUND DRIVE CABLE, THROTTLE HCS 3 /8-16 x ¾ HCS 3 /8-16 x / ROPE GUIDE NUT ¼-20 HEX NYLOC NUT 3 /8-16 HEX NYLOC CABLE, ZONE CABLE, GROUND DRIVE BAIL HCS M6-1 x 0 GR GRIP, HANDLE DECAL, STOP SIGN DECAL, PTO WASHER 5 /16 WAVE CLIP BUSHING 5 /16, BAIL Husqvarna - 13

14 HANDLE & CONTROLS SELF PROPELLED MODEL Husqvarna

15 HANDLE & CONTROLS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION HANDLE BAIL, GROUND DRIVE CABLE, THROTTLE HONDA HCS 3 /8-16 x ¾ HCS 3 /8-16 x / ROPE GUIDE NUT ¼-20 HEX NYLOC NUT 3 /8-16 HEX NYLOC CABLE, ZONE HONDA BAIL HCS M6-1 x 0 GR GRIP, HANDLE DECAL, STOP SIGN DECAL, PTO WASHER 5 /16 WAVE CABLE, GROUND DRIVE CLIP BUSHING 5 /16, BAIL Husqvarna - 15

16 HANDLE & CONTROLS BLADE, BRAKE, CLUTCH (BBC) MODELS , , Husqvarna

17 HANDLE & CONTROLS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION HANDLE BAIL, GROUND DRIVE BAIL, BBC CABLE, THROTTLE BBC HCS 3 /8-16 x ¾ HCS 3 /8-16 x / ROPE GUIDE BBC CONTROL NUT ¼-20 HEX NYLOC NUT 3 /8-16 HEX NYLOC CABLE, GROUND DRIVE HCS M6-1 x 0 GR HCS M6-1 x 50 GR GRIP, HANDLE DECAL, STOP SIGN DECAL, PTO WASHER 5 /16 WAVE CLIP BUSHING 5 /16, BAIL Husqvarna - 1

18 HANDLE & CONTROLS BLADE, BRAKE, CLUTCH (BBC) MODEL Husqvarna

19 HANDLE & CONTROLS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION HANDLE BAIL, GROUND DRIVE BAIL, BBC CABLE, THROTTLE BBC HCS 3 /8-16 x ¾ HCS 3 /8-16 x / ROPE GUIDE BBC CONTROL NUT ¼-20 HEX NYLOC NUT 3 /8-16 HEX NYLOC CABLE, GROUND DRIVE HCS M6-1 x 0 GR HCS M6-1 x 50 GR GRIP, HANDLE DECAL, STOP SIGN DECAL, PTO WASHER 5 /16 WAVE CLIP BUSHING 5 /16, BAIL Husqvarna - 19

20 CUTTING EQUIPMENT BLADE, BRAKE, CLUTCH (BBC CE) MODELS , , Husqvarna

21 CUTTING EQUIPMENT ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION BRACKET, CABLE SPRING, CLUTCH CLUTCH BRACKET SHOULDER BOLT, ANCHOR BBC CLUTCH SCREW ¼-20 x 5 /8, SLF TAP HCS M x 25 MM, GR DECK GUARD, BBC BLADE, W21, BBC BLADE W21 BBC MODEL NUT ¼-20 HEX NYLOC HCS ¼-20 x LOCKWASHER /16 Husqvarna - 21

22 CUTTING EQUIPMENT BLADE, BRAKE, CLUTCH (BBC CE) MODELS Husqvarna

23 CUTTING EQUIPMENT ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION BLADE, W21 BBC LOCKWASHER / HCS ¼-20 X 1 GR NUT ¼-20 HEX NYLOC HCS M x 25 MM, GR SPRING, CLUTCH BRACKET, CLUTCH BRACKET, CABLE CLUTCH, BBC HONDA KEY, WOODRUFF # SHOULDER BOLT, ANCHOR CLUTCH STOP BLACK SPACER, BBC Husqvarna - 23

24 TRANSMISSION SELF PROPELLED Husqvarna

25 TRANSMISSION ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION BELT RHSNB ¼-20 x PULLEY, DRIVEN BRACKET, CABLE SHIFTER SPACER, TRANSMISSION HCS ¼-14 x 1½ SLF TAP PIVOT BUSHING SHAFT COVER SPIRAL PIN, 3 /16 x 1 / TRANSMISSION NUT ¼-20 HEX NYLOC WASHER ¼ SCREW ¼-14 x ¾, SELF TAP SPRING, TRANSMISSION SPRING, KEY WOODRUFF KEY, SPECIAL BELT KEEPER, REAR Husqvarna - 25

26 ENGINE PLATE KAWASAKI ZONE MODELS , , , Husqvarna

27 ENGINE PLATE ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION BEARING, SHAFT SUPPORT PULLEY, ENGINE SCREW ¼-20 x 3 /8 SET HCS 3 /8-24 x 2, GR SPACER, BLADE DRIVER SCREW ¼-20 SLF TAP WASHER CLUTCH WASHER 3 /8 SPLT LOCK ADAPTER, BLADE KEY, STEPPED OIL, QT BOTTLE DECK GUARD, BBC SCREW #10-24 x NUT #10-24 HEX NYLOC BOLT 3 /8-16 x 1½ THD FRM BRACKET, SHAFT SUPPORT BELT KEEPER, FRONT HCS ¼-20 x 5 / WASHER ¼ FLAT SAE NUT ¼-20 HEX NYLOC BLADE, 21" MODELS BLADE, 21" MODELS , , Husqvarna - 2

28 ENGINE PLATE KAWASAKI BBC MODELS , , , Husqvarna

29 ENGINE PLATE ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION PULLEY, ENGINE BOLT 3 /8-16 x 1½ THD FRM KEY, WOODRUFF OIL, QT BOTTLE DECK GUARD, BBC NUT #10-24 HEX NYLOC SCREW #10-24 x SCREW ¼-20 x 3 /8 SET HCS M8 x 1.25 x 20 MODELS , ONLY BELT KEEPER, FRONT MODELS , ONLY Husqvarna - 29

30 ENGINE PLATE HONDA BBC MODELS Husqvarna

31 ENGINE PLATE ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION PULLEY, ENGINE HCS 5 /16-24 x 1½ KEY, WOODRUFF OIL, QT BOTTLE DECK GUARD, BBC NUT #10-24 HEX NYLOC SCREW #10-24 x SCREW ¼-20 x 3 /8 SET WASHER 3 /8 SPLT LOCK WASHER 5 /16, SAE NUT 5 /16-18 HEX NYLOC HCS 5 /16-18 x 2½ Husqvarna - 31

32 ENGINE PLATE HONDA ZONE MODEL: Husqvarna

33 ENGINE PLATE ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION PULLEY, ENGINE SCREW ¼-20 x 3 /8 SET HCS 5 /16-24 x 1½ WASHER 3 /8 SPLT LOCK ADAPTER, BLADE SPACER, BLADE DRIVER HCS /16-20 x 2 GR LOCKWASHER / KEY 3 /16 SQ x BLADE, WASHER CLUTCH HCS 5 /16-18 x 2½ WASHER 5 /16 SAE NUT 5 /16-18 HEX NYLOC OIL, QT BOTTLE DECK GUARD, BBC NUT #10-24 HEX NYLOC SCREW #10-24 x NUT ¼-20 HEX NYLOC BRACKET, SHAFT SUPPORT BEARING, SHAFT SUPPORT SCREW ¼-20 SLF TAP BELT KEEPER, FRONT WASHER ¼ FLAT SAE HCS ¼-20 x 5 /8 Husqvarna - 33

34 DECALS DISCHARGE GUARD OR GRASS CATCHER MUST BE IN PLACE WHILE OPERATING NE PAS UTILISER SANS LE DEFLECTEUR OU LE COLLECTEUR D HERBE NICHT OHNE PRALLBLECH ODER GRASFANGSACK VERWENDEN NON UTILIZZARE SENZA DEFLETTORE O SACCO RACCOGLIERBA NIET GEBRUIKEN ZONDER UITWERPKOKER OF GRASVANGZAK NO UTILIZAR SIN DEFLECTOR O SACO RECOGEDOR N O UTILIZAR SEM DEFLECTOR OU COLECTOR DE RELVA K R INTE UTAN UTKASTARSKYDD ELLER GR SUPPSAMLARE BRUG IKKE PL NEKLIPPEREN UDEN UDKASTERSK RM ELLER GR SOPSAMLER E S K TT ILMAN ULOSHETTOAUKON SUOJAA TAI KERUUPUSSIA IKKE KJ R UTEN UTKASTERKEKSEL ELLER GRESSAMLER MONTERT 1. READ OPERATING MANUAL AND FOLLOW SAFETY INSTRUCTIONS. 2. LOOK DOWN AND BEHIND BEFORE AND WHILE MOVING BACKWARDS. 3. MOW ACROSS SLOPES, NEVER UP OR DOWN SLOPES. 4. KEEP CHILDREN AND BYSTANDERS OUT OF AREA AND AWAY FROM MOWER. 5. CLEAN AREA OF DEBRIS AND LOOSE ITEMS BEFORE OPERATING MOWER. 6. KEEP ALL SAFETY DEVICES, SHIELDS, GUARDS AND DOORS IN PLACE AND WORKING WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. 4 WARNING Deflector shield or entire grass catcher must be in place while mowing N Husqvarna

35 DECALS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION DECAL, CROWN ROUND DECAL, CPSC DECAL, WARNING MULTILINGUAL DECAL, WARNING DECAL, WARNING DECAL, PROP DECAL, 80DBA AUSTRALIA DECAL, ECM AUSTRALIA Husqvarna - 35

36 ACCESSORIES MULCH KIT (BRAKE) MULCH KIT (BBC) Husqvarna

37 ACCESSORIES ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION MULCH PLUG BLADE, 21", BBC MULCH BLADE, 21", MULCH Husqvarna - 3

38

39

40 P/N R03 02/25/08