PIÈCES DÉTACHÉES SNM7V. Tondeuse à conducteur marchant

Size: px

Start display at page:

Download "PIÈCES DÉTACHÉES SNM7V. Tondeuse à conducteur marchant"

Douglas Chapman
5 years ago
Views:

PIÈCES DÉTACHÉES Tondeuse à conducteur marchant SNM7V

du Brézet - 63014 Clermont-Ferrand Cedex 2 Tél : 04

1 PIÈCES DÉTACHÉES Tondeuse à conducteur marchant SNM7V Yvan Béal - 21, av. de l Agriculture - B.P. 16 Z.I. du Brézet Clermont-Ferrand Cedex 2 Tél : Télécopie : info@yvanbeal.fr R.C.S. Clermont-Fd B S.A.S. au capital de

3 Table Of Contents PAGE GROUP 4 Handles & Controls 8 Cutting Deck, Blades 10 Wheel Brackets & Latches 12 Wheels, Front & Rear 14 Drive System (Self-Propelled) 18 Transmission (Differential) 20 Side Chute, Adapter 22 Grass Bag Components 24 Decals 26 Recycling Kits - Accessory 28 Snapperizer - Accessory 30 Thatcherizer - Accessory 21" STEEL DECK EUROPEAN SERIES 19 & 20 3 Manual No TP B-WB-N

4 Handles & Controls Manual No " STEEL DECK EUROPEAN 4 SERIES 19 & 20

5 Handles & Controls Item Part No Qty Description HANDLE, Upper HANDLE, Middle HANDLE, Lower LH (Adjustable) HANDLE, Lower RH (Adjustable) BAIL, OPC Control CLIP, Zone Control CABLE, Zone Control (53-63/64 Long) (used on series 19) CABLE, Zone Control (46-1/4 Long) (used on series 20) HANDLE, Clutch GRIP, International Symbol CABLE, Clutch Control (41-1/4 Long) COVER, Vinyl SPRING, Clutch- 21S BRACKET, Shift TIE, Wire, 1.29 long, black BRACKET, Bell Crank SPACER,.33 x.63 x BELL CRANK CONTROL PANEL (w/o Electrical Switch Hole) SCREW, 1/4-20 x 1/2 Pan Head Self-Tap (Torx) WASHER,.33 x.88 x.09 Flat SCREW, 5/16-18 x 7/8 Hex Head Cap, GR TEENUT 5/ BUSHING, Differential,.328 x.625 x BOLT, 5/16-18 x 3/4 Hex Flange Lock GR NUT, 5/16-18 Hex Flange Lock, GR 5 was NUT, 5/16-18 Hex Center Lock was LEVER, Shift NUT, 5/16-24 Hex Center Lock GR 5 was CLIP, Wiring Harness SCREW, 5/16-18 x 1-7/8 Curved Head GR 2 (or ) KNOB, 5/16-18 Wing (Black) SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR WASHER, 1/4 Internal Tooth Lock was NUT, 1/4-20 Hex was SCREW, 1/4-20 x 2 Hex Head Cap, GR BUSHING,.27 x.35 x.4 Flange PIN, 1/4 x 1-1/ PUSH-NUT, 1/ BALL JOINT, 1/ NUT, 1/4-28 Hex FOAM GRIP, long SCREW, 3/8-16 x 2 Hex Head Cap, GR NUT, 3/8-16 Hex Center Lock Footnotes: Note: * SNAPPER part number & revision is stamped on throttle cable. 21" STEEL DECK EUROPEAN SERIES 19 & 20 5 Manual No

6 Handles & Controls Manual No " STEEL DECK EUROPEAN 6 SERIES 19 & 20

7 Handles & Controls Item Part No Qty Description WASHER, 5/16 Internal Tooth Lock WASHER, 7/16 Flat WASHER, Nylon ROD, Speed Control (1/4-28 thread) GUIDE, Rope (1/4-20 thread) NUT, 1/4-28 Hex GR 5 or B CABLE-TIE, * THROTTLE CONTROL, (48.5 long) (used on series 19) * THROTTLE CONTROL, (62.0 long) (used on series 20) THROTTLE KNOB KNOB, Shift CLAMP, 7/8 Double Cable SCREW, #8-32 x 1/2 Cross Recess Filister Head Machine NUT, #8-32 Hex SCREW, 5/16-18 x 1-1/4 Hex Washer Head Self-Tap was WASHER, Belleville SCREW, 5/16-24 x 1 Hex Head Cap GR WASHER, 11/32 Flat COTTER PIN, 5/16 Self Lock DECAL, Easy Speed, Control Panel (used on series 19) DECAL, EZ Speed, Control Panel (used on series 20) CLAMP, Casing SCREW,#10-32 x 5/8 Self-Tap Footnotes: Note: * SNAPPER part number & revision is stamped on throttle cable. 21" STEEL DECK EUROPEAN SERIES 19 & 20 7 Manual No

8 Cutting Deck, Blades Manual No " STEEL DECK EUROPEAN 8 SERIES 19 & 20

9 Cutting Deck, Blades Item Part No Qty Description K E1 1 * ENGINE, B&S 6.75 Quantum, Euro (not shown) (Used on ERP BV) B1 1 * ENGINE, B&S Intek Edge, Euro (not shown) (Used on EP217019BV & ERP217019BV) -- 12S B1 1 * ENGINE, B&S 875 Series, W14, Euro (not shown) (Used on EP BV & ERP BV) -- 12S B1 1 * ENGINE, B&S 875 Series, Snapper, Euro (not shown) (Used on EP BV & ERP BV) WELDMENT, Deck, 21 Non-Adjust Air (was ) used on ERP BV, ERP217019BV, ERP BV & ERP BV WELDMENT, Deck, 21, S.P., HV, Core Model (was ) used on EP217019BV, EP BV & EP BV NUT, 5/16-18 Hex Flange Lock, GR 5 was BOLT, 5/16-18 x 1/2, Short Neck Carriage, GR PLUG, Hole, Polyethylene BOLT, 5/16-18 x 3/4 Short Neck Carriage GR 5 (or ) RETAINER, 5/16 Bolt SCREW, 3/8-24 x 2 Hex Head Cap, GR WASHER, Cone BLADE, 21 Air Lift BLADE, 21 Ninja (Quad Edge) (used on ERP BV, ERP217019BV & ERP BV) COVER, Belt PULLEY, Engine (25mm I. D. x 2-1/8 O.D.) SCREW, 5/16-18 x 1/2 Hex Socket Head KEY, Woodruff #HP-506 Hi-Pro HUB, Blade Drive 25mm I.D SCREW, 3/8-16 x 1 Self-Tapping (engine mount bolts) SCREW, 5/16-24 x 21/32 Oval Head Machine AIR LIFT WASHER, 5/16 Internal Tooth Lock NUT, 5/16-24 Hex, GR FENDER (Weldment), EP21S SCREW, 1/4-20 x 1/2 Hex Flange Self-Tap was DECAL, Caution Symbols (International) BOLT, 5/16-18 x 2-1/4 Hex Flange Lock BUSHING,.388 x.625 x 1.62 Flanged (matl: powdered metal) WASHER, 7/16 Flat COVER, Belt- IP21S SCREW, 5/16-18 x 1/2 Hex Head Cap, GR WASHER, 5/16 Flat Footnotes: NOTE: * Purchase engine & engine parts from engine service outlets. 21" STEEL DECK EUROPEAN SERIES 19 & 20 9 Manual No

10 Wheel Brackets & Latches Manual No " STEEL DECK EUROPEAN 10 SERIES 19 & 20

11 Wheel Brackets & Latches Item Part No Qty Description BOLT, 1/4-20 x 1/2 Short Neck Carriage GR 5 or FOOT GUARD, P21 Euro, Long RING, Split (Black) SUPPORT, Foot Guard WASHER, 1/4 Internal Tooth Lock was NUT, 1/4-20 Hex, GR 5 or B was ASSY, Wheel Arm, Right Rear (S.P.) was ASSY, Wheel Arm Left Rear Long SP21S was ASSEMBLY, Right Wheel Arm ASSEMBLY, Left Wheel Arm was GRIP, Height Latch (replaces (voided)) LATCH, Height Adjusting (long) BOLT, 5/16-18 x 1 Hex Washer Face Shoulder ARM, Wheel, Right Rear ARM, Wheel, Left Rear BEARING, 9/16 I.D SCREW, #10-32 x 3/8 Hex Washer Self-Tap RETAINER, 5/16 Bolt NUT, 5/16-18 Hex Flange Lock, GR 5 was LATCH, Height BOLT, 5/16-18 x 3/4 Hex Washer Face Shoulder WHEEL ARM, R.H. Front (Round Hole) WHEEL ARM, L.H. Front (Square Hole) was AXLE, 21 (3/8-16 thread- both ends, long) (used on EP BV & ERP BV) AXLE, 21 (7/16-20 thread- both ends, long) (used on EP BV & ERP BV) COVER, Front 21 walk SCREW, Round Washer Head Torx, Hi-Lo Footnotes: 21" STEEL DECK EUROPEAN SERIES 19 & Manual No

12 Wheels, Front & Rear Manual No " STEEL DECK EUROPEAN 12 SERIES 19 & 20

13 Wheels, Front & Rear Item Part No Qty Description ASSY, Wheel, 10 x 2 Drive w/metal insert Snapper Tread (used on Series 20) WHEEL, 10 x 1.75 Plastic (self-propelled) (used on Series 19) HUBCAP, 10 Wheel, Spoked- Snapper Cool Gray (used on Series 20) PLUG, Wheel NUT, 3/8-16 Hex Center Lock NUT, 7/16-20 Hex Center Lock Jam WASHER,.387 x 1 O.O. Flat WASHER, 7/16 Flat (used on Series 19) ASSY, Wheel, 8 x 2 Idle, Snapper Tread, Charcoal Gray (incl. 2 ball bearings ( ); used on Series 20) WHEEL, 8 x 1.75 Plastic (used on Series 19) HUBCAP, 8 Wheel, Spoked- Snapper Cool Gray (used on Series 20) BUSHING, Axle WASHER, Shim,.875 x.531 x.060 Footnotes: 21" STEEL DECK EUROPEAN SERIES 19 & Manual No

14 Drive System (Self-Propelled) Manual No " STEEL DECK EUROPEAN 14 SERIES 19 & 20

15 Drive System (Self-Propelled) Item Part No Qty Description BELT, Poly-V WASHER, 44 x.78 x.025 Curved LINK, Differential WASHER, 5/16 Internal Tooth Lock SCREW, 5/16-18 x 1/2 Pan Head Self-Tap (Torx) ASSEMBLY, Idler Arm, Bushing & Spacer (Incl. items 7-9) ARM, Clutch Idler BUSHING, Flange,.381 x.625 x SPACER, Idler Arm NUT, 1/4-28 Hex Top Lock PULLEY, Flat Idler,.25 ID, 2.25 OD SCREW, 1/4-28 x 1-3/8 Hex Head Cap, GR COTTER PIN, 3/32 x 1/2 was SPRING, Clutch - 21S See also HANDLES & CONTROLS page SPRING, Idler - Torsion STUD, Idler (3/8-24 thread) HOLDER, Bearing (Inner Half) WASHER, 3/8 Internal Tooth Lock NUT, 3/8-24 Hex WASHER,.390 I.D. Flat BALL BEARING, Spherical O.D.,.38 I.D O-RING, V HOLDER, Bearing (Outer Half) SCREW, 1/4-20 x 1/2 Hex Flange Self-Tap was NUT, 3/8-24 Hex Center Lock, GR GUIDE, Thrust Plate (3/8-24 thread) A 1 THRUST PLATE, Short WASHER, 3/8 Flat SHIELD, Hex Shaft RETAINING RING,.625 External COTTER PIN,.06 x.50 YZ was WASHER,.28 x.63 x.06 Flat LINK, Transfer (1/4-28 thread) NUT, 1/4-28 Hex See also HANDLES & CONTROLS page BALL JOINT, 1/4-28 See also HANDLES & CONTROLS page WASHER, 1/4 Internal Tooth Lock DISC, Driven (Cantilever) ASSEMBLY, Driven Disc & Bearing (Incl. item #'s 37 & 38) BALL BEARING, 3/4 Bore SHAFT, Hex Drive PULLEY, Poly-V (2 O.D.) BELT, Engine Drive (Stretch) Footnotes: * NOTE: Assembly includes items 18, 19, 26-30, 32, 34, 36, 37 & " STEEL DECK EUROPEAN SERIES 19 & Manual No

16 Drive System (Self-Propelled) Manual No " STEEL DECK EUROPEAN 16 SERIES 19 & 20

17 Drive System (Self-Propelled) Item Part No Qty Description DRIVE DISC, Steel KIT, Drive Disc & Bushing (Incl. item #'s 42, 43, & 51) BUSHING, Powdered Metal RETAINER, 5/16 Bolt SPACER,.500 x.65 x BRACKET, Deck, P21S ASSEMBLY, Deck Bracket (Incl. item #'s 8, 45 & 46) SPRING, Wheel Drive BOLT, 5/16-18 x 1/2, Short Neck Carriage, GR BOLT, 5/16-18 x 5/8 Short Neck Carriage GR 5 or NUT, 5/16-18 Hex Flange Lock, GR 5 was NUT, 3/8-16 Hex, GR 5 or B * ASSEMBLY, Driven Disc (Cantilever) Euro Footnotes: * NOTE: Assembly includes items 18, 19, 26-30, 32, 34, 36, 37 & " STEEL DECK EUROPEAN SERIES 19 & Manual No

18 Transmission (Differential) Manual No " STEEL DECK EUROPEAN 18 SERIES 19 & 20

19 Transmission (Differential) Item Part No Qty Description ASSEMBLY, Transmission (Incl. items 1 thru 30) NUT, 5/16-18 Hex Lock (or ) WASHER, Cone PULLEY, Poly-V Belt (3.5 O.D.) WASHER, 44 x.78 x.025 Curved ASSEMBLY, Right Housing (Incl. items 6, 7, 8, 9, 10 & 30) (no longer a part sale item) HOUSING, Right Side SCREW, 5/16-24 x 1-1/8 Rib Neck, GR SEAL, 5/8 Internal Diameter BEARING, Tapered (Differential Housing) BALL BEARING, 7/16 I.D., 1/1/8 O.D. (was ) PLUG, Transmission Housing GEAR, Input AXLE, Short was GEAR, Differential (46 Tooth) PLATE, 46T Gear WASHER, Thrust, 3/4 I.D SCREW, #10-32 x 1-1/2 Hex Head Cap GR GASKET, Housing WASHER, 5/16 Internal/External Tooth Lock BRACKET, Differential SCREW, 1/4-20 x 1 Hex washer Self-Tap was SPACER, Axle Gear ASSEMBLY, Long Axle was GEAR, Pinion (12 tooth) SPACER, Pinion Gear SHAFT, Pinion NUT, #10-32 Hex Nyloc ASSEMBLY, Left Housing HOUSING, Left GASKET, 5/8 O. D oz. * "00" Grease, 32 oz bottle Footnotes: NOTE: * Maximum capacity of transmission before causing leakage behind pulley is 4 oz. DO NOT OVERFILL! 21" STEEL DECK EUROPEAN SERIES 19 & Manual No

20 Side Chute, Adapter Manual No " STEEL DECK EUROPEAN 20 SERIES 19 & 20

21 Side Chute, Adapter Item Part No Qty Description ADAPTER, Grass Bag Euro 21 (see Grass Bag Accessory page) SIDE CHUTE, COVER, 21 Deck NUT, 5/16-18 Hex Large Flange Center Lock RETAINER, 5/16 Bolt BOLT, 5/16-18 x 1-1/8 Short Neck Carriage GR 5 ZP SPACER,.316 I.D. x.375 O.D. x.310 thick BOLT, 5/16-18 x 3/4 Short Neck Carriage GR 5 was Footnotes: 21" STEEL DECK EUROPEAN SERIES 19 & Manual No

22 Grass Bag Components Manual No " STEEL DECK EUROPEAN 22 SERIES 19 & 20

23 Grass Bag Components Item Part No Qty Description BAG ASSEMBLY (Door) (incl. items 2, 3 & 4) (used on Series 19) BAG ASSEMBLY (Door) No Graphics (incl. items 2, 3 & 4) (used on Series 20) CONNECTOR, Grass Bag (weldment) GRASS BAG (Door w/gray Letters) (used on Series 19) GRASS BAG (Door) No Graphics (used on Series 20) ASSEMBLY, Bag Wire (12 Wide) PLUG, Chute Adapter NUT, 1/4-20 Hex Jam, GR 5 or B LOCKWASHER, 1/4 Spring ROD, Rope Pulley (3/8-16 thread) PULLEY, Nylon BUSHING, Flange,.381 x.625 x NUT, 3/8-16 Hex Nyloc NUT, 5/16-18 Large Flange Hex Center Lock RETAINER, 5/16 Bolt SCREW, 5/16-18 x 5/8 Cross Recess Pan Head BOLT, 5/16-18 x 3/4 Short Neck Carriage GR 5 (or ) SPACER,.316 I.D. x.375 O.D. x.310 thick ADAPTER, Bag BOLT, 1/4-20 x 3/4 Short Square Neck Carriage, GR NUT, 1/4-20 Hex was WASHER, 1/4 Internal Tooth Lock was COVER, Bag Adapter HINGE, Chute Cover BOLT, 1/4-20 x 5/8 Flat Head Square Neck, GR STOP, Cover TRIM, Moulding Footnotes: 21" STEEL DECK EUROPEAN SERIES 19 & Manual No

24 Decals Manual No " STEEL DECK EUROPEAN 24 SERIES 19 & 20

25 Decals Item Part No Qty Description DECAL, Easy Speed, Control Panel DECAL, Easy Speed, Control Panel DECAL, Snapper, Steel Decks DECAL, Snapper, Front Cover DECAL, Euro Community (CE) DECAL, Warning (Deck) DECAL, Spart Plug International Symbol DECAL, Noise, 98 db DECAL, Warning, Euro, Multi-Panel DECAL, Caution, Symbols DECAL, Speed Shift DECAL, Throttle Control, B&S DECAL, OPC Bail (International Symbol) DECAL, Deck/Chute International Warning DECAL, Warning (Euro) DECAL, Ninja, Mulching System DECAL, Hi Vac, Cutting Deck DECAL, Front Cover, Ninja Mulching System DECAL, Front Cover, Hi-Vac DECAL, 2006 Year of Mfg. Footnotes: 21" STEEL DECK EUROPEAN SERIES 19 & Manual No

26 Recycling Kits - Accessory Manual No " STEEL DECK EUROPEAN 26 SERIES 19 & 20

27 Recycling Kits - Accessory Item Part No Qty Description KIT, Recycling Cover (Incl. items 1 & 3 below) (for 4HP & above engines) KIT, Recycling Plug (Incl. items 2 & 3 below) (for 4HP & above engines) COVER, 21 Deck PLUG, Chute Adapter BLADE, 21 Quad Edge Ninja Footnotes: 21" STEEL DECK EUROPEAN SERIES 19 & Manual No

28 Snapperizer - Accessory Manual No " STEEL DECK EUROPEAN 28 SERIES 19 & 20

29 Snapperizer - Accessory Item Part No Qty Description KIT, Snapperizer HV (Incl. items 1 & 2 thru 5) (used on EP217019BV) KIT, Snapperizer F & M (Incl. items 1& 2A thru 5) (used on ERP BV & ERP217019BV) SCREEN, Fastener Assembly RING, Bottom (21.77 Inside Diameter) 2A RING, Bottom (22.60 Inside Diameter) NUT, 5/16-24 Hex, GR5 (only 1 shown) WASHER, 5/16 Split Lock (only 1 shown) SPRING (only 1 shown) Footnotes: 21" STEEL DECK EUROPEAN SERIES 19 & Manual No

30 Thatcherizer - Accessory Manual No " STEEL DECK EUROPEAN 30 SERIES 19 & 20

31 Thatcherizer - Accessory Item Part No Qty Description KIT, Thatcherizer (Incl. items 1 thru 27) LATCH, Frame Attachment 2A BAR, Mount (Right Hand) 2B BAR, Mount (Left Hand) ROD, Tine SUPPORT, Wheel TRAY, Tine KIT, Tine Thatching Spring (was ) BUSHING, Wheel Adjuster AXLE, Wheel WHEEL, 7.00 x 1.50 Gage NUT, 1/4-20 Hex Top Lock (was (only 9 shown)) WASHER, 1/4 Flat (was ) SPRING, Compression BOLT, 1/4-20 x 1-1/4 Hex, GR NUT, 1/4-20 Hex, GR 5 (was ) CAP, Vinyl BOLT, 1/4-20 x 2-1/2 Square Neck Carriage (only 1 shown) BOLT, 5/16-18 x 1 Square Neck Carriage, GR 5 (was (only 1 shown)) BOLT, 1/4-20 x 3/4 Square Neck Carriage, GR 5 (was ) WASHER, Reinforcing (only 1 shown) WASHER, 5/16 Split Lock (only 1 shown) NUT, 5/16-18 Hex, GR 5 (was (only 1 shown)) NUT, 1/2 Push BEARING, Nyliner SCREW, 5/16-18 x 1/4 Set WASHER, 1/2 Flat DECAL, Adjustment DECAL, Thatcherizer Footnotes: 21" STEEL DECK EUROPEAN SERIES 19 & Manual No

Reproduction. Not for 21" STEEL DECK EUROPEAN WALK BEHIND MOWERS SERIES 19 & 20. Parts Manual for

Reproduction. Not for 21 STEEL DECK EUROPEAN WALK BEHIND MOWERS SERIES 19 & 20. Parts Manual for Parts Manual for 21" STEEL DECK EUROPEAN WALK BEHIND MOWERS SERIES 19 & 20 Model No. Description 7800041 EP217019BV 7800250 EP2187519BV 7800686 EP2187520 7800731 EP2187520 7800445 EP2187520BV 7800039 ERP2167519BV