BRCA Approved Zero-Timing Blinky ESC s

Size: px

Start display at page:

Download "BRCA Approved Zero-Timing Blinky ESC s"

Robert Kennedy
6 years ago
Views:

1 The following list detils the speed controllers pproved for use in the stock clss during the BRCA 1/12 th Electric Circuit Ntionls nd the modes in which they must be run. This list is derived from the ROAR one used for events in North Americ nd my be mended or dded to s new speed controllers re dded by ROAR nd/or pproved by the BRCA 12 th Section Eligibility Officer. To dd new speed controller, the mnufcturer/uk importer/uk Distributor/UK Retiler must pply directly to the 12 th Section Eligibility Officer. Contct detils on the 12 th Section of Mnufcturer Prt Number Nme / Description Clndr Rcing Concepts Clndr Rcing Concepts Cstle Cretions Grupner GmbH & Co. Grupner GmbH & Co. Grupner GmbH & Co. Grupner GmbH & Co. CRC4000 CRC4002 P-CC6619 (1S) P-CC6600 GM-Genius 120 GM-Genius 150 GM-Genius 75 GM-Genius 90 Advnced Electronics Blck Dimond LV Advnced Blck Dimond Softwre Version 2.1 softwre or higher 2.1 softwre or higher Specil Notes Mmb Mx Pro V1.26 Blinking LED Yellow, Red, nd Green blink fst nd t the sme time in position when the zero mode is ctive Yellow, Red, nd Green blink fst nd t the sme time in position when the zero mode is ctive Yellow, Red, nd Green blink fst nd t the sme time in position when the zero mode is ctive Yellow, Red, nd Green blink fst nd t the sme time in position when the zero mode is ctive Hobbico DTXM1300 Durtrx DE10 Brushless Hs blinking blue light when the throttle is in nd when set to the notiming profile #1 Hs blinking blue light when the throttle is in nd when set to the notiming profile #1 V13.0 Users must use Mode 0-5 fter fctory reset or fter delivery. Modes 6-9 hve high speed timing, no LED blinking. No high speed timing is llowed to set with PC-softwre. Mode 2 is fctory setting. If high speed timing, no LED blinking. V13.0 Users must use Mode 0-5 fter fctory reset or fter delivery. Modes 6-9 hve high speed timing, no LED blinking. No high speed timing is llowed to set with PC-softwre. Mode 2 is fctory setting. If high speed Softwre Version V13.0 timing, no LED blinking. Users must use Mode 0-5 fter fctory reset or fter delivery. Modes 6-9 hve high speed timing, no LED blinking. No high speed timing is llowed to set with PC-softwre. Mode 2 is fctory setting. If high speed timing, no LED blinking. V13.0 Users must use Mode 0-5 fter fctory reset or fter delivery. Modes 6-9 hve high speed timing, no LED blinking. No high speed timing is llowed to set with PC-softwre. Mode 2 is fctory setting. If high speed timing, no LED blinking. A blinking green LED will be displyed when the is t

2 Hobbywing Hobbywing Hobbywing Hobbywing (blue) or (blck ) (blue) or (blck) (blue) (blck) (blue) (blck) Hobbywing (blck) (blue) BRCA Approved Zero-Timing Blinky s Progrmble Justock Club SPEC N/A 0 (zero) degrees of timing nd the throttle is t. Also, if the is t ny dvncement in timing the LED will be solid green Zero timing nd nondjustble Xtreme Stock 508 Zero timing the RED LED ctive nd throttle in Xerun 60A-SD.1 Xerun 120A-SD.1 KO Propo VFS-1 BMC Ver 1.5 KO PROPO Americ 508 Zero timing the RED LED ctive nd throttle in 508 Zero timing the RED LED ctive nd throttle in Xerun 120A-1S 508 Zero timing the RED LED ctive nd throttle in Contct Mfg for Firmwre Upgrde on switch BLZ-350 Set to zero timing in firmwre. Cnnot progrm ny timing into Losi LOSB9500 1/10th Xcelorin signified by blinking color LED LRP LRP80705 SPX Zero Non-updteble; Zero timing when power profile is set to 0. Red LED will flsh in to indicte zero timing LRP LRP80905 LRP SXX Comp LRP LRP LRP SXX TC spec LRP LRP80910 SXX Stock Spec Brushless LRP LRP80915 SXX Stock Spec Nosrm Perl Evolution 1.3,1.5 Mode 3 timing must be set to 0 signified by blinking blue LED in 1.3,1.5 Mode 3 timing must be set to 0 signified by blinking blue LED in N/A Non-updteble. Mode 3 timing must be set to 0 signified by blinking blue LED when in. 4.2,4.4 Desc: For Spec zero timing mode, both mode 2 (torque) nd mode 3(timing) must be set to zero. Blue LED will blink in 1.3,1.5 Mode 3 timing must be set to 0 signified by blinking blue LED in Nosrm Perl ISTC 1.3,1.5 Mode 3 timing must be set to 0 signified by blinking blue LED in

3 Nosrm Perl SpecRcing N/A Non-updteble. Mode 3 timing must be set to 0 signified by blinking blue LED when in. Nosrm Perl SpecRcing Novk NOV1709 GTB 2 Sportsmn Rcing Brushless Novk NOV1740 Kinetic Rcing Novk NOV1741 Kinetic 1S Rcing Novk NOV1745 Hvoc Pro SC Novk Electronics Novk Electronics Speed Pssion 1850 The Edge w/trxxs 1851 The Edge w/tmiy Cirtix Stock Club Rce # No Timing djustments-no LED Speed Pssion EXT98802LPF LPF 2.1 (Crbon, Silver, Blue) Speed Pssion EXT98802LPF GT-LPF 2.0 (Crbon, Silver or Blue Version) 4.2,4.4 Desc: For Spec zero timing mode, both mode 2 (torque) nd mode 3(timing) must be set to zero. Blue LED will blink in Version 1.0 softwre or higher Version 1.0 softwre or higher Version 1.0 softwre or higher Desc: When ll timing is OFF, then white LED will be OFF to indicte no timing ctive. must be set t Timing Level = 1 or Zero Timing (defult). The white LED will blink during strt up to remin off during ll norml Zero Timing opertion to indicte tht timing is OFF must be set t Timing Level = 1 or Zero Timing (defult). The white LED will blink during strt up to remin off during ll norml Zero Timing opertion to indicte tht timing is OFF must be set t Timing Level = 1 or Zero Timing (defult). The white LED will blink during strt up to remin off during ll norml Zero Timing opertion to indicte tht timing is OFF 000 There is NO timing in this. The white LED will blink during strt up to remin off during ll norml opertion to indicte tht timing is OFF 000 There is NO timing in this. The white LED will blink during strt up to remin off during ll norml opertion to indicte tht timing is OFF Non- Progrmmble No Timing djustments- Signified by blinking LED Speed Pssion EXT98802Pro GT-Pro 2.0

4 (Crbon, Silver or Blue Version) Speed Pssion EXT98802PRO PRO 2.1 (Crbon,Silver,Blu e) Speed Pssion SPEXT98802SB GT.1 Pro Stock Edition Blue Edition Speed Pssion SPEXT98802S GT.1 Pro CB Stock Edition Speed Pssion Speed Pssion Speed Pssion SPEXT98802EX B SPEXT98802EX C SPEXT98802EX S VTX10 VTX10-Lite VTX10R VTX10R-Lite Blck Edition GT.1 EX - Blue GT.1 EX - Crbon GT.1 EX - Silver #6VSVT10001 Sensored BL w/proguge #6VSVT10002 Sensored BL w/o ProGuge #6VSVT10R01 Sensored BL w/proguge #6VSVT10R02 Sensored BL w/o ProGuge HPI Flux Pro Competition Hcker Motor GmbH TENSORIC10 Tensoric 10 Competition (160A) Hobbywing XERUN V3 Xerun 120A SD V3 Brushless Novk NOV1708 GTB2 Sportsmn Low Profile A19 Non timing indicted by next to letter S on V-port the S LED will be off. A19 Non timing indicted by next to letter S on V-port the S LED will be off. A19 Non timing indicted by next to letter S on V-port the S LED will be off. A19 Non timing indicted by next to letter S on V-port the S LED will be off. V1.1_120511_bet must use Profile #2 which will hve green blinking LED the Power Button V3.0_ Zero timing the RED LED ctive nd throttle in V1.1_120511_bet must use Profile #2 which will hve green blinking LED the Power Button 000 There is NO timing in this, the White LED will blink during the strt up to prove it works, but will remin off during ll norml opertion to

5 Novk NOV1743 OVAL SPEC 1S Novk NOV1748 GTB2 Low Profile W/XDRIVE Novk NOV1749 GTB2 W/XDRIVE Tem Orion ORI65101 Vortex R10 Pro (120A,1S- 2S) Tem Orion ORI65102 Vortex R10 Pro (160A,2S- 3S) Tem Orion ORI65109 Vortex R10 Rce (90A,2S-3S) BRCA Approved Zero-Timing Blinky s Tekin TT1152 Tekin RS 223 ** NOTE NEW SOFTWARE PROFILE* Tekin TT1153 Tekin RS Pro indicte tht timing is OFF. 000 When NO timing in this, the White LED will blink while powered on. If the white led is on then timing is ctive. NOTE: this is different thn pst Novk s 000 There is NO timing in this, the White LED will blink during the strt up to prove it works, but will remin off during ll norml opertion to indicte tht timing is OFF. 000 The White LED will blink during the strt up to prove it works, but will remin off during ll norml opertion to indicte tht timing is OFF Zero timing - the RED LED ctive nd throttle in 1.68 Zero timing - the RED LED ctive nd throttle in 1.68 Zero timing - the RED LED ctive nd throttle in When in LOCKED no timing mode LED 3, 4, 5 will be on nd blinking. NOTE my not run with softwre v ** NOTE: NEW SOFTWARE PROFILE When in LOCKED no timing mode LED 3, 4, 5 will be on nd blinking. NOTE my not run with softwre v212 6VSVT01001 Viper VTX1 A30 Non timing indicted by next to letter S on V-port the S LED will be off. 6VSVT10001 Viper VTX10 A30 Non timing indicted by 6VSVT10R01 Viper VTX10R A30 next to letter S on V-port the S LED will be off. Non timing indicted by next to letter S on V-port the S LED will be off.

6 CORE RC CR173 PACE-45R N/A non updteble Zero timing Profile #1 the RED LED Flshes when the is ctive nd throttle in LRP LRP80999 SXX Mod nd Stock Upgrde bord LRP LRP80960 Flow Competition LRP LRP80970 Flow Works Tem Nosrm NR90960 Comet Evo Nosrm NR90970 Comet HD Novk 1730 Impct Brushless Rcing ORCA OES112V1 ORCA Vritr VX- 1Titnium Color ORCA OES380VX ORCA Vrit VX Ornge/Ti/Blue V 3.1 v1.4 (Std) v3.3 (OffRod v4.0 (OnRod v5.1 (Stock v1.4 (Std) v3.3 (OffRod v4.0 (OnRod v5.1 (Stock v1.4 (Std) v3.3 (OffRod v4.0 (OnRod v5.1 (Stock v1.4 (Std) V3.3 (OffRod v4.0 (OnRod v5.1 (Stock Zero timing-blue LED flshing Boost 0 The blue LED will flsh in trigger position, to indicte tht entire timing dvncement is disbled. Boost 0 is enbled when mode 3+4 re set to #0 vlue (then Mode 5+6 will not be visible) Boost 0 The blue LED will flsh in trigger position, to indicte tht entire timing dvncement is disbled. Boost 0 is enbled when mode 3+4 re set to #0 vlue (then Mode 5+6 will not be visible) Boost 0 The blue LED will flsh in trigger position, to indicte tht entire timing dvncement is disbled. Boost 0 is enbled when mode 3+4 re set to #0 vlue (then Mode 5+6 will not be visible) Boost 0 The blue LED will flsh in trigger position, to indicte tht entire timing dvncement is disbled. Boost 0 is enbled when mode 3+4 re set to #0 vlue (then Mode 5+6 will not be visible) 000 by blinking white LED. Note: this is different thn previous Novk s by BLINKING blue LED t. Using ORCA progrm box, set the following settings: Timing 0 Degree, Turbo dely off, Turbo timing Off, Turbo intervl to 0. Softwre version displyed on progrm box. by blinking blue LED t. Using ORCA Progrm box set the following settings. Timing 0 degree, Turbo dely

7 off, Turbo timing off, Turbo intervl to 0. Softwre version displyed on progrm box. Svox Rzor160A V1 by BLINKING blue LED t Speed Pssion SF Reventon S / Ornge Color Speed Pssion SF Reventon S / Silver Color Speed Pssion SF Reventon Pro / Blue Color Speed Pssion SF Reventon Pro / Blck Color Speed Pssion SP Reventon S / Blue Color Speed Pssion SP Reventon R / Ornge Color Speed pssion SP Reventon Stock Club Rce ST0 (stock0) Speed Pssion SP Reventon R / Blue Color Speed Pssion SP Reventon R / Silver Color Tem Powers TP-XPS EL-C40A Hrdwre Ver. 1.2 Tem Powers TP-XPS/Sport Sport-C-70 Hrdwre Ver. 1.2 V0 V0 There is no timing in this, signified by blinking LED by BLINKING green LED t by BLINKING green LED t 6VSVT01001 Viper VTX1 A55 GREEN LED Blinks on switch box in 6VSVT10011 Viper VTX10 A55 GREEN LED Blinks on switch box in 6VSVT10015 Viper VTX10 BE A55 GREEN LED Blinks on switch box in 6VSVT10R15 Viper VTX10 R A55 GREEN LED Blinks on switch box in 6VSVT10R20 Viper VTX10R BE A55 GREEN LED Blinks on switch box in Tem Orion ORI65120 Vortex R10 Stock Zero Timing 1.71 Zero timing-the Red LED ctive nd throttle in position Tem Powers TP-XPS Pro-C-V1.2 Hrdwre Ver. 1.2 V0 by BLINKING Green LRD t. not firmwre

8 updteble Vmpire Rcing VR5002 SR1 V1.0 PTS - Power Timing System menu setting 1. MENU LED flshes blue Vmpire Rcing VR5001 SR1+ V1.0 PTS - Power Timing System menu setting 1. MENU LED flshes blue Muchmore ME-FLK4 Flet 4.0 Blck p-sto0-0b36 zero timing - blinking red LED t position Muchmore ME-FLB4 Flet 4.0 Blue p-sto0-0b36 zero timing - blinking red LED t position Tekin TT1154 Tekin RS Gen2 Electronic Speed Control Hobbywing Hobbywing XERUN-120A V3 XERUN-120A V3.1 Tem Novk 1755 Pulse Brushless Pro 2S Rcing Hobbywing XERUN-120A-1S V3.1 Mrdve V300 Octne 120 Amp 1S Hobbywing Hobbywing V3.1 Stock Spec G-Force G0014 G-Force 1s 120 Sensored Muchmore Rcing ME-FLPK / ME- FLPB FLETA PRO Blck Cse / Blue Cse 38 Softwre V3.1_121129_bet Softwre V3.1_121129_bet V0 Softwre V3.1_121129_bet Softwre - version 508 Softwre V3.1_121129_bet Softwre Version 1.07 Softwre versions v1.0 v1.1 Zero timing locked SPEC mode - LED s 3, 4, nd 5 flsh for ROAR events. Unlocked zero timing is LED s 3 nd 5 flshing - not to be used for BRCA snctioned events. NOTE my not run with softwre v212 must use Profile #2, red LED on power button flshes when throttle is t in non-timing mode must use Profile #2, red LED on power button flshes when throttle is t in non-timing mode Zero timing- the white LED flshes when the throttle is in the Note: The WHITE LED blinking on this Novk is different thn previous Novk s where the white LED would be OFF to indicte zero timing must use Profile #2, red LED on power button flshes when throttle is t in non-timing mode Zero timing the RED LED ctive nd throttle in must use Profile #2, red LED on power button flshes when throttle is t in non-timing mode LED will blink Red in Neutrl to show blinky mode. Only vilble when no timing or boost is ctive. Blinky LED when Turbo/Boost settings OFF Muchmore ME-FLSK / ME- FLETA STOCK Softwre versions Blinky LED when

9 Rcing FLSB Blck Cse / Blue Cse v1.0 v1.1 Turbo/Boost settings OFF Muchmore Rcing ME-FLEK FLETA EURO Blck Cse / Blue Cse Tem Wve RB-0 Tem Wve RB-0 Zero Timing Brushless Rcing Controller Softwre versions v1.0 v1.1 Softwre v1.0 Blinky LED Flshing green LED t throttle.5 - Lst updted: 13iv2013 PDW V3.0 Updted for seson 28vii13 PDW V3.1 Novk 1755 dded 8x13 PDW V4 non-blinking speedos to be removed highlighted in yellow 10x13 PDW V4.1 errors on Novk speedos corrected 11x13 PDW V4.2 re-formtted into single tble 11x13 MS V4.3 Hobbywing v3.1 1S nd Mrdve dded 29x13 PDW V4.4 Hobbywing v3.1 Stock Spec dded 26xi13 PDW V4.5 Non-blinking speedos removed, new speedos dded 1i14 - PDW V4.6 G-Force, Muchmore (3) nd Tem Wve speedos dded 24i14 - PDW Some items in this list re ROAR Rcing Used with permission of

Stay up-to-date via RSS!

Page 1 of 6 Stay up-to-date via RSS! enter keywords and hit en Search ROAR Approved Non-Timing Manufacture Part Number Name/Description Software Version Affiliate Tech Details Calandra Racing Concepts