Brushless 'Modified' Motors (All Winds) v7
|
|
|
- Quentin Grant
- 5 years ago
- Views:
Transcription
1 Motor Builder Type/ Range Brushless 'Modified' Motors (All Winds) v7 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA 2018 Rules: For Brushless 'Modified' Motors. Starting , only Motors included on this list, can be used at EFRA Sanctioned events (EC or GP), for: The Motor Class designated for the event. Illustration only Notes Whiist sample Motors submitted have been found to conform with EFRA 2018 rules for 'Modified' Brushless Motors, it is the responsibility of ALL competitors to ensure that the versions they use also comply with all EFRA rules and requirements. Approval Date Motors below this level must comply with EFRA Rules :- App.4, 4.8 & 4.9 which requires access to stator to allow measurement and visual appraisal of the laminates. Also 4.12, which requires the Rotor to be marked with Name or Logo & Part #. Surpass Rocket V4S Stator removes. Adjustable timing 0/+60 deg. Wind etched on stator. Body screws non-magnetic, timing screws magnetic, Al. retaining housing, steel shielded bearings. Rotor with Surpass, Part # C52123 on shaft RC Concept RC Concept CR10 6.5T Part # Stator removes. Adjustable timing 0/+60. Wind etched on stator. All screws magnetic, Al. retaining plate, steel shielded bearings. Rotor with name. Part # Tekin Redline G3 SPEC-R 6.5T Part # TT2700 Adj. timing 0/60. Machined Alum. Can, wind printed. Stator visable. All screws magnetic, Al. retaining housing, steel shielded bearings. Min. length 50.00mm. Rotor with name & Part # Motiv MC2 6.5T Part # MOV10625S Alu. timing plate with logo. End- Caps remove, hysol stator ends. Adjustable sensor plate timing 0/+40 deg. Has stator access. All screws magnetic, full Al. sensor housing, steel shielded bearings. Rotor part # MOV Hobbywing Hobbywing Xerun V10 G3 5.5T - 8.5T Xerun V10 G3 3.5T - 5.0T Black Alu. End-Caps, plastic timing insert. 5.0T & below has large area's of End Caps removed. 5.5T & above has full End Caps with small slots. Rotor with one Alu. bal. ring. Adjustable timing +20/+ 50 deg. Stator and wind visible. All screws magnetic, Al. retaining housing, steel shielded bearings. Rotor Part #'s:- 3.5T T & 5T T & above Option rotors: Any of above Arrowmax Dash R-Tune. 6.5T Part # DA Stator removes. Adjustable timing 0/+60 deg. Wind etched on stator. All screws magnetic, Al. retaining plate, steel shielded bearings. Rotor with name. 4.5T : Part # DA Shaft RL125 Other winds: Part # DA Shaft RS125. Option rotors: DA , DA , DA Motiv MC2 Alu. timing plate with MOTIV logo. Both End-Caps remove, moulded stator ends. Adjustable sensor plate timing 0/+40 deg. Has stator access. All screws magnetic, full Al. sensor housing, steel shielded bearings. Rotor part # MOV
2 Reds Racing VX2 6.5T Part # MTTE 0018 Red Al. timing adjuster. Adjustable timing Stator removes & has wind etched. All screws magnetic, Al. sensor housing & retaining plate, steel shielded bearings. Rotor with name & Part # MSTE Surpass Rocket V3 Pro Modified Stator bonded, has access. Adjustable timing 0/+45 deg. Wind etched on stator. Body screws non-magnetic, timing screws magnetic, Al. retaining housing, steel shielded bearings. Rotor with Surpass, Part # C51125 on shaft ORCA RT-S Stator bonded, has access slots. ORCA RT S & wind etched on End-Cap. Adjustable timing +/-45. All screws magnetic, Al. retaining housing, steel shielded bearings. Rotor with name & Part # ORR218ML Nosram N22 Black moulded End-Bell with XTEC. Fixed End-Sleeve etched with wind. Black rotor shaft. Black stator moulding. Option Al. End-Plate: Black allowed Rotor with Nosram & Part # Fantom Fantom FR-1 v2 E. 6.5T. Pt. # FAN19456E Stator glued in sleeve. Sleeve with wind etched. Adjustable timing +20/+60 deg. Has stator access but hysol on ends. Wind etched on stator. Rotor with name, Part # - FAN Corally MOLAN SS-3.0 T2 Sensored system, two ports. "Y" Wind. One end of stator visable but sleeve removes. Stator has EFRA & wind etched. Grey End- Cap Alum., adjustable timing, no numbers. No fan on rotor. Only T2 version approved. Rotor with logo, Part # Ultimate Modified Normal dia. Black sleeve with removable Alu. End-Plates. Adjustable timing 0/+40. Wind etched on end-plate. Serial # on sleeve. Two sensor plug. Rotor has name & part # ORI Muchmore FLETA ZX V2 6.5T Part # MR-V2ZX065 Al. timing plate, adjustable timing Stator removes but can be seen through holes. Wind etched on stator. Shaft etched with rotor dia. Rotor with name & Part #: MR-FZR 01. Optional Rotor #'s: All MR-FZR :- 17TI, 16TI, 12WCTI, 20TIY, STTI, 02TI, 22TIY Yokomo Racing Performer. M3 Series Black Can & End-Cap. Nickel rotor with one plain, drilled Alu. bal. ring. Adjustable timing 0/+ 50 deg. Wind on stator. Stator removes easily. Rotor with name & Part # RP-056. Optional rotor #'s: RP- :- 057, 058, 059, 060, 061, 062, 063, 064, LRP XTEC X22 Black moulded End-Bell with XTEC. Fixed End-Sleeve etched with wind. Black rotor shaft. Black stator moulding. Option Al. End-Plates: Black , Blue allowed Rotor with LRP & Part # Opt. rotors: , , PRT Electronic PRT AIRs PRO Black Alu. Caps & Sleeve, PRT on End-Plate. Adjustable timing. Caps remove. Wind marked on sleeve. Has stator access. Rotor with name & Part # 125HT. Option rotor: 12HT Scorpion SCORPION POWER RS-3420 Stator bonded in sleeve. Sleeve & stator with wind etched. Adjustable sensor plate timing 0 +/- deg. Has stator access. Type 18 stator. Rotor has:- Steel Sleeve & Fan, Name & Part # 975. Option rotors: 976,
3 Ultimate Stock XLW 6.5T # ORI28390 Small dia. Black sleeve with removable Alu. End-Plates, all retained with long screws. Adjustable timing 0/+40. Wind etched. Two sensor plug. Rotor has name & part # ORI Opt.rotors: ORI: , 41471, 41473, R1 Brushless Motor Lab. R1 V15 BRCA & EFRA End-Plate with R1 (only) etched. Stator sleeve with wind. Rotor with black balance ring. Adjustable timing 0-60 deg. Has stator access. Collector ring 3mm thick. Motors with epoxy filled windings not approved. Rotor with name & Part #: R Option rotors: R , R Maclan MRR Black Can & End-Cap with copper timing plate & logo. Nickel rotor with one red Alu. bal. ring. Adjustable timing +20/+ 60 deg. Stator removes easily. Rotor Part # MCL4077. Optional rotors #'s: MCL4078, MCL Fantom Fantom FR-1 Type RS Stator has blue mouldings both ends. Sleeve with wind etched. Adjustable sensor plate timing +20/+60 deg. Has stator access. Wind etched on stator. Rotor with name, Part # - FAN Trinity Monster Horsepower End-plate has Trinity etched. Stator sleeve with Trinity, M & Wind etched. Adjustable sensor plate timing 0-60 deg. Has stator access. Wind stamped on lower collector ring. Rotor with name & Part # TEP1153 Option Rotors # TEP1151 & TEP VST2 Pro. Mg. LW Sensored system. Dark grey one-piece Can. End-Plate has Team & wind marked, retained with five screws. Adjustable timing +/- 10. Two sensor plugs. Has stator access. Rotor with name & Part # ORI Option rotors: ORI 41470, 41472, ORCA RT Black Can & E/Cap. Stator bonded but has access slots. ORCA RT & wind etched on End-Cap. Adjustable timing +/-50. Rotor with name & Part # ORR323M3. Option rotors:- ORR M0, 321M1, 238ML, 233ML, 253ML, 258ML Corally Dynospeed MODX 3.0 Sensored system, two ports. "Y" Wind. One end of stator visable but sleeve removes. Stator has EFRA & wind etched. Wind etched on End-Cap. End-Cap Alum., adjustable timing, no numbers. Fan on rotor. Rotor with logo, Part # Fenix Fenix DFV2 Black Alu. Can & End-Caps. Timing insert with Fenix DFV2 etched. Nickel sintered rotor with one Alu. bal. ring. Adjustable timing +20/+ 60 deg. Lams.visible. Rotor Part # AP67-B Option rotors: MF72, MF72-B Tesla Tesla EP Blue Alu. Can & End-Caps. Timing insert with Tesla logo etched. Nickel sintered rotor with one Alu. bal. ring. Adjustable timing +20/+ 60 deg. Lams.visible. Rotor Part # TS or TS Ruddog Ruddog RP540 Silver Alu. Can & End-Caps. Timing insert with Ruddog etched. Nickel rotor with one Alu. bal. ring. Adjustable timing +20/+ 60 deg. Lams.visible with wind visable on stator. Rotor Part # RP VST2 Pro. V2 LW Grey one-piece Can. Black all Aluminium End-Plate retained with five screws. Adjustable timing +/- 10. Wind etched. Two sensor plugs. Has stator access. Rotor with name & Part # ORI Option rotors: ORI 41472,
4 VST2 Pro. V2 LW Ultra Grey one-piece Can. Black all Aluminium End-Plate retained with five screws. Adjustable timing +/- 10. Wind etched. Two sensor plugs. Sensing magnets. Has stator access. Rotor has name & Part # ORI Option rotors: ORI VST2 Pro. V2 XLW Black sleeve with removable Alu. End-Plates, all retained with long screws. Adjustable timing +/-10. Wind etched. Two sensor plug. Rotor has name & part # ORI Option rotors: ORI 41472, VST2 Pro. V2 XLW ULTRA Black sleeve with removable Alu. End-Plates, all retained with long screws. Adjustable timing +/-10. Wind etched. Two sensor plug. Sensing magnets. Rotor has name & Part # ORI Option rotors: ORI Tekin Redline Gen3 Black Alum. Timing plate 2.5mm above red ring.. Adj. timing 0/60. Machined Alum. Can with wind printed. Stator visable via. slots. Rotor with one brass balance ring Part # 2721 or Option rotor Turnigy Trackstar V2 Stator slides from sleeve.sleeve with wind etched. Adjustable sensor plate timing 0-50 deg. Has stator access. Wind etched on stator. Rotor with name, sizes & Part #. Rotor Part # Optional rotors 282, 283, RC Concept EC End-caps and sleeve remove. Sleeve with wind etched. Adjustable sensor plate timing 0/45 deg. Has stator access. Wind & EFRA painted on stator. Rotor with name & sizes printed. Part # on shaft Team Epic ReVtech 24K End-Plate has Revtech etched. Stator sleeve with ReVtech & Wind etched. Adjustable sensor plate timing 0-60 deg. Has stator access. Wind stamped on lower collector ring & visible. Rotor with name & Part # TEP1153. Option rotors: TEP1151, TEP Hobbywing Reedy Xerun V10 G2 Reedy Sonic M3 Black Alu. Can & End-Cap, moulded timing insert with logo moulded. Nickel sintered rotor with one Alu. bal. ring. Adjustable timing +20/+ 50 deg. Stator and wind visible. Rotor Part # Optional rotors: , 0008, 0010, 0012, Option End-Cap, timing +30/+60, Part # Black Alu. Cap & Sleeve, Alu. timing insert with 'R' logo. Adjustable sensor plate timing 0/+ 50 deg. Caps remove, some stators can be removed, some bonded. Wind etched on stator. Nickel sintered rotor with one Alu. balance ring. Rotor Part # 275. Two stator designs. Optional Rotors: # 274 & # 276. #'s:- 271, 272, 273, 286, Team ORION VST2 XLW (2015) Black one-piece Can. Black all Aluminium End-Plate retained with five screws, fixed timing. Wind etched. One sensor plug. Rotor - ORI Motors below this level must comply with EFRA Rule - App.4, 4.8 & 4.9, which requires access to the stator to allow measurement and visual appraisal of the laminates. Team VST2 Pro. LW (2014) Grey one-piece Can. Black all Aluminium End-Plate retained with five screws, adjustable timing. Wind etched. Two sensor plugs. Nickel sintered rotor, 12.1 dia, 4.7 core
5 EZpower EZ Kicker Gun-metal End-Plates & Sleeve. Adjustable red timing ring. Nickel sintered rotor with Red hollow balance ring marked EZ, 12.4 dia, 5.0 core. Caps & sleeve remove, has stator access nvision nvision R540 All metal End-Bell ass. with seperate timing ring. Adjustable timing +/- 10. Stator removes from sleeve. Nickel sintered rotor, no balance ring, 12.0 dia, 4.7 core. Caps & sleeve remove, has stator access ORCA RX3 Black Can & E/Cap. Complete stator removes. Has stator access slots. ORCA RX3 & wind etched on End-Cap. End-Cap Alum., adjustable timing. 12.5mm Rotor black balance ring Team Powers Actinium. Black Aluminium End-Plates, Team Powers etched. Gun-Metal stator sleeve. Nickel sintered rotor with no balance ring, dia, 5.0 core. Adjustable sensor plate timing. Has stator access. Optional End-Plate TP-ATEB-001 allowed Trinity D4 Purple Alu. timing plate with TRINITY & 4 etched. Caps and sleeve dark gun-metal, all parts remove. Adjustable timing -10/+60. Has stator access. Nickel sintered rotor with one red balance ring, 12.5 dia, 5.0 core TEP1152. Option rotors: TEP1151, TEP King Golden Speed Passion Competition V4.0 Red Mounting plate, Black/Red Alu. End-Plate ass. Black stator sleeve with wind etched. Nickel sintered rotor with one Red balance ring, 12.5 dia, 5.0 core. Adjustable timing 0-40 deg. Has stator access Absima Revenge V2 Black Alu. Caps & Grey Sleeve, Logo only on End-Plate. Sintered rotor with one Alu. balance ring, 12.5 dia, 7.2 core. Sensor plate timing 0/+ 40 deg. Caps & sleeve remove, wind marked on stator. Only V2 version approved SkyRC Ares Pro. Grey Alu. Caps & Sleeve, Alu. timing insert with Ares printed. Nickel sintered rotor with one Alu. balance ring, 12.5 dia, 5.0 core. Adjustable sensor plate timing 0/+ 40 deg. Caps & sleeve remove, wind etched on stator Reds Racing VX Red metal End-Plate at Term. End, with adjustable timing Black Can/Sleeve. Stator separates & has wind etched. Rotor with Red drilled balance ring # MSTE0013. Optional rotors:- # MSTE0012, MSTE G Force G Force Super Sonic Black Alu. Caps & Sleeve, Alu. timing insert with logo printed. Nickel sintered rotor with one Alu. balance ring, 12.5 dia, 5 core. Adjustable sensor plate timing 0/+ 40 deg. Caps & sleeve remove, wind etched on stator Hacker SKALAR 10 Black plastic timing plate, adjustable Purple Can/Sleeve. Stator separates. Nickel sintered rotor with drilled balance ring Trinity Trinity D3.5 Purple Aluminium End-Plates with TRINITY etched. Black stator sleeve with D3.5 & wind. Nickel sintered rotor with one red balance ring, 12.5 dia, 5.0 core. Adjustable sensor plate timing deg. Has stator access
6 Hobbywing Xerun V10 Black Alu. Can & End-Cap, moulded timing insert with logo printed. Nickel sintered rotor with one Alu. fan balance ring, 12.5 dia, 5.0 core. Adjustable sensor plate timing -20/+ 50 deg. Stator and wind visible via. sleeve slots Yokomo YOKOMO 'M' Series Black metal End-Bell at Term. End, with adjustable timing 0-50, spigoted into sleeve. Black Can/Sleeve. Stator separates. Nickel sintered rotor dia, 5.0 core Team Wave Eclipse Mod. Black Alum. End-Plates. Adj. timing. Black Alum. stator sleeve with wind etched. Nickel sintered rotor with one plain balance ring, 12.5 dia, 5.0 core, marked 125-MT. Stator visable via. Sleeve slots Muchmore FLETA ZX Black metal End-Bell with plastic timing plate, with adjustable timing Black Can/Sleeve. Stator separates. Nickel sintered rotor with drilled balance ring, shaft etched with rotor dia. Aluminium timing-plate MR-FZAT fitted to later versions ORCA TX Dull Grey Aluminium casings. Main sleeve removes, stator spigoted into fixed casing. Has stator access slots. ORCA TX & wind etched. End-Plate moulded, adjustable timing. Rotor no balance ring. Endplate OME111TX allowed. New sensor Ass. CAS-0220TX-30 fitted Team VST2 Pro. (2013) Grey one-piece Can. Black all Aluminium End-Plate retained with five screws, adjustable timing. Wind etched. Two sensor plugs. Nickel sintered rotor, 12.1 dia, 4.5 core Vampire Vampire V2 AB+ Stator removes from Al. Can. Black Al. ring retaining plastic timing plate. Wind etched. Nickel sintered rotor( Gold Col.) with two solid balance rings, 12.5 dia, 7.25 core. Plastic timing plate & retaining ring modified. All aluminium timing & end-plate Ass. fitted Tekin Redline GEN2 Black Alum. End-Plates, not joined. Adj. timing. Machined Alum. Can with wind etched. Stator visable via. Sleeve holes. Nickel sintered rotor with one brass balance ring Reedy Reedy Sonic Mach 2 Black metal End-Bell at Term. End, with adjustable timing Black Can/Sleeve. Stator separates. Nickel sintered rotor with drilled balance ring Part # 958. Optional rotors:- # 957, # Savox Savox SX.1 Aluminium casings. Slot for stator access included. Main sleeve removes, stator spigoted into fixed casing. Saxox X1 & wind etched. End-Plate moulded, adjustable timing. Rotor has 1 balance ring Motors below this level retain approval, although they were approved before implementation of EFRA Rule App.4, 4.8 & 4.9, (requiring access to stator for measurement and visual appraisal of laminates). Some motors do allow stator access. Horizon Hobby Dynamite Platinium Black Alluminium End-Plate at Term. End, with adjustable timing. Wind etched on Term. Sleeve, Stator mould & Stator Lams. Stator separates. Nickel sintered rotor with drilled balance ring, 12.5 dia, 5.0 core
7 Ansmann Xirius Black Plastic Moulding at Term. End, with adjustable timing. Silver Can with silver end cover, 3mm slots in both parts. Wind etched on stator. Stator separates. Nickel sintered rotor with solid balance ring, 12.5 dia, 5.0 core Nosram Pure 2 Evolution Black moulded End-Bell with XTEC. Fixed End-Sleeve etched with wind. Nickel Sintered rotor. Rotor shaft, Black. Many rotor options. Grey stator moulding Dualsky Track & Field Z5 Silver Sleeve & Mounting-Plate. Z5, Wind, Track&Field etched on sleeve. Black Alu. End-Plate & retaining ring. Adjustable timing 7-27 deg. Nickel sintered rotor with no balance ring, 12.5 dia, 7.2 core LRP X20 Modified Black moulded End-Bell with XTEC. Fixed End-Sleeve etched with wind. Nickel Sintered rotor. Rotor shaft, Black. Many rotor options. Grey stator moulding Team Epic ReVtech R-Power Copper colour Aluminium End- Plates, ReVtech painted. Blue stator sleeve with ReVtech & Wind painted. Nickel sintered rotor with one red balance ring, 12.5 dia, 5.0 core. Adjustable sensor plate timing. Mounting Plate with 3 x 5.9mm slots Thunder Power Z3R-M Black Plastic Moulding at Term. End, with adjustable timing. Red Can/Sleeve with silver end cover, 6mm slots in both parts from Wind etched on stator. Stator separates. Nickel sintered rotor with drilled balance ring, 12.5 dia, 5.0 core Speed Passion Competition 3.0 Std. Vers T & 8.5T no Sleeve Vents. Gun-Metal Aluminium End-Plates, SP etched. Gun-Metal stator sleeve with Wind & 3.0 etched. Black sintered rotor with one balance ring, 12.5 dia, 5.0 core. Adjustable timing 0-10 deg Graupner GM Brushless PRO version. Alum. Mounting-Plate with 3x5mm holes and 3 radiused slots. Plastic End-Cap with GM moulded. Adj. timing. Gun-Metal stator sleeve with Pt.# etched. Side entry sensor plug. Nickel rotor marked GM Race, dia, 5.5 core Team VST Pro. Grey one-piece Can. Grey End-Plate retained with four screws, adjustable timing. Wind etched. Nickel sintered rotor, 12.5 dia, 5.0 core. NOTE: Early versions without stator viewing slots are not approved Reedy Reedy Sonic Black Plastic End-Plate at Term. End, with adjustable timing. Black Can/Sleeve. Wind etched. Stator separates. Nickel sintered rotor with drilled balance ring, 12.5 dia, 7.2 core. Later version has more timing graduations detailed & relocated pointer Speed Passion Competition 3.0 MMM Version Dark Gun-Metal Aluminium Sleeve & End-Plates, SP etched. Sleeve with Wind & MMM etched. End-Plates with grooves. Red sensor board. Black sintered rotor with one balance ring, 12.5 dia, 5.0 core. Adjustable timing deg
8 Vampire Vampire Type AB+ Black Plastic End-Plate at Term. End, with adjustable timing. Sensor plug horizontal. Gun-metal finish mounting plate and sleeve (9.5 has Black Mounting Plate). Wind etched. Nickel sintered rotor with no balance rings, 12.5 dia, 7.00 core Ansmann Ansmann Xirius Pro Black Aluminium End-Caps, Wind etched. Black loose stator sleeve. Nickel sintered rotor with no balance rings, 12.5 dia, 7.25 core. Fixed timing Viper Viper VST Red Aluminium End-Plates, VST & wind etched. Black grooved stator sleeve. Black sintered rotor with no balance rings, dia, 7.35 core. Adjustable timing HPI Flux Pro. Black Aluminium End-Plates, HPI etched. Black stator sleeve with Wind etched. Nickel sintered rotor, 12.5 dia, 7.2 core. Adjustable timing. Optional rotors , 12.8, (Nickel plated) 13.0, 13.5 (Copper finish). Optional rotor Mag. & shaft Black Speed Passion Competition 3.0 1Cell Gun-Metal Aluminium End-Plates, SP etched. Gun-Metal stator sleeve with Wind & 1Cell etched. Black sintered rotor with one balance ring, 12.5 dia, 5.0 core. Adjustable timing 0-10 deg ORCA RX2 Gun-Metal Aluminium End-Plates, ORCA RX2 etched. Gun-Metal stator sleeve with ORCA RX2 & Wind etched. Black sintered rotor with one balance ring, 12.5 dia, 5.0 core. Adjustable sensor plate timing. Mounting Plate with 3 x 6mm holes & chamfer. Op.Rotor 12.8 dia, 5.0 core Trinity Trinity D3 Gun-Metal Aluminium End-Plates, Trinity etched. Black stator sleeve with D3 & Wind etched. Nickel sintered rotor with one balance ring, 12.5 dia, 5.0 core. Adjustable sensor plate timing Team Pro Race 2009 Dark Gun-Metal Aluminium End- Plate with TOP etched. Dark Gun-Metal loose centre sleeve. Wind etched on Term sleeve. Mounting face with radial grooves, mounting screws on 25.0 & 25.4 pcd. Nickel sintered rotor, no fan dia. Adjustable timing Novak Ballistic Black Al. End-Plate with NOVAK etched. Copper colour loose centre sleeve. Nickel plated sintered rotor. 3/16 Bearing at Pinion end. Stator can be seperated. Adjustable timing. Vented End-Bells # 5925 approved Paul Worsley. (EFRA Motor Homologation Officer)
Brushless 'Spec.' Motors (21.5 Turn) v13
Motor Builder Type/ Range Brushless 'Spec.' Motors (21.5 Turn). 2017 v13 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (21.5 Turn) v6
Motor Builder Type/ Range Brushless 'Spec.' Motors (21.5 Turn). 2017 v6 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (21.5 Turn) v7
Motor Builder Type/ Range Brushless 'Spec.' Motors (21.5 Turn). 2018 v7 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (10.5 Turn) v3
Brushless 'Spec.' Motors (10.5 Turn). 2016 v3 Motor Builder Type/ Range EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (13.5 Turn) v4
Motor Builder Type/ Range Brushless 'Spec.' Motors (13.5 Turn). 2017 v4 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
05' - Brushless 'Spec.' Motors (13.5 Turn)
05' - Brushless 'Spec.' Motors (13.5 Turn) Note: These motors differ from Brushless 'Modified' motors. 2016 v7 Motors on this list have to comply with BRCA Electric Board 'Spec.' Brushless Rules, Section
05' - Brushless 'Spec.' Motors (13.5 Turn)
05' - Brushless 'Spec.' Motors (13.5 Turn) Note: These motors differ from Brushless 'Modified' motors. 2017 v13 Motors on this list have to comply with BRCA Electric Board 'Spec.' Brushless Rules, Sections
Brushless 'Spec.' Motors (10.5 Turn) v2
Motor Builder Type/ Range Brushless 'Spec.' Motors (10.5 Turn). 2018 v2 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
05' - Brushless 'Spec.' Motors (10.5 Turn)
05' - Brushless 'Spec.' Motors (10.5 Turn) Note: These motors differ from Brushless 'Modified' motors. 2015 v8 Motors on this list have to comply with BRCA Electric Board 'Spec.' Brushless Rules, Section
Brushless 'Spec.' Motors (13.5 Turn) v2
Motor Builder Type/ Range Brushless 'Spec.' Motors (13.5 Turn). 2018 v2 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (13.5 Turn) v4
Motor Builder Type/ Range Brushless 'Spec.' Motors (13.5 Turn). 2018 v4 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (13.5 Turn) v9
Brushless 'Spec.' Motors (13.5 Turn). 2015 v9 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Motors shown on this list are "Known to Comply" with EFRA 2015 Rules for Brushless 'Spec.' 13.5T Motors. s
17.5 Spec Motor List Scotty Ernst Productions September 22, 2017
Absima Revenge V2 Part # 2130021 AccuVance LUXON KG 17.5T AccuVance LUXON BS Dual 17.5T Amain.com Eco Power Slingshot ECP-8000 Corally Corally Pro Silver - 399175 Corally Dynospeed Spec 3.0, C-61102 Dualsky
17.5 Spec Motor List Scotty Ernst Productions June 12, 2018
Absima Revenge V2 Part # 2130021 AccuVance LUXON KG 17.5T AccuVance LUXON BS Dual 17.5T Amain.com Eco Power Slingshot ECP-8000 Arrowmax Dash R-Tune Part # DA740175 Corally Corally Pro Silver - 399175 Corally
Epic Nemesis 17.5T # TRI December 11, 2009
Manufacturer Name/Description 17.5 μh* Approval Date Dynamite DYNP1017 Quantex 17.5T 33.5 February 10, 2012 Eco Power Eco Power Slingshot ECP-8000 (w/12.5mmrotor) can use ECP-8010 (123mm option rotor)
Stay up-to-date via RSS!
Page 1 of 6 Stay up-to-date via RSS! enter keywords and hit en Search ROAR Approved Non-Timing Manufacture Part Number Name/Description Software Version Affiliate Tech Details Calandra Racing Concepts
4.0.5 Ceramic magnets only (cobalt and rare earth magnets specifically not allowed).
4.0 Motors Modified: Only brushed or brushless motors approved by IFMAR, ROAR EFRA & BRCA may be used. 4.0.1 Brushed Motors: General definition of a Brushed Motor: 4.0.2 Specifications; 05 sized displacement.
The provisions of this rewritten Section 8.4 will become effective October 1, 2017 except where otherwise noted in the rules.
The provisions of this rewritten Section 8.4 will become effective October 1, 2017 except where otherwise noted in the rules. 8.4 ELECTRIC BRUSHLESS MOTOR RULES 8.4.1 General: 8.4.1.1 Sensor based motors
Stock Spec ESC List neutral and when set to the no-timing profile #1 Calandra Racing Diamond Castle Creations Mamba Max Pro V1.
Calandra Racing CRC4000 Advanced Electronics 2.1 software or Has a blinking blue light when the throttle is in Concepts Black Diamond LV higher neutral and when set to the no-timing profile #1 Calandra
Stock Spec ESC List neutral and when set to the no-timing profile #1 Calandra Racing Diamond Castle Creations Mamba Max Pro V1.
Calandra Racing CRC4000 Advanced Electronics 2.1 software or Has a blinking blue light when the throttle is in Concepts Black Diamond LV higher neutral and when set to the no-timing profile #1 Calandra
IFMAR ELECTRIC RACING BATTERIES and MOTORS
IFMAR ELECTRIC RACING BATTERIES and MOTORS 1/12 TH & 1/10 TH ISTC and 1/10 th OFF ROAD Version: 25 November 2017 (replaces September 2016) INDEX BATTERIES 2 1 APPRO VAL PROCEDURE BATT ERIES 2 2. BATTERIES
The South African Radio Drivers Association For On Road Electric Model Cars
The South African Radio Drivers Association For On Road Electric Model Cars Car Specifications for 1/10 th and 1/12 th Scale Electric Model Racing Cars 2018 Release This Document supersedes all previous
IFMAR ELECTRIC RACING BATTERIES and MOTORS
IFMAR ELECTRIC RACING BATTERIES and MOTORS 1/12 TH & 1/10 TH ISTC and 1/10 th OFF ROAD Version: 20 October 2016 V3 (replaces October 2015) INDEX BATTERIES 2 1 APPRO VAL PROCEDURE BATT ERIES 2 2. BATTERIES
All cars will use replica GT shells or club alternatives from the list of eligible shells given in Appendix 1
BRCA GT12 Circuit Rules 2011 2012 with DDRCC ammendments. Version 2.0-11 November 2012 This class is based on the principals of close, fair and low cost racing. This will make it both an ideal entry level
Graupner GmbH & Co. GM-Genius 150, GM-Genius 75, GM-Genius 90 approved all as picture below.
Advanced Electronics Calandra Racing Concepts CRC4000 Black Diamond LV 2.1 Has a blinking blue light when the throttle is in neutral and when set to the no-timing profile #1 Calandra Racing Concepts CRC4002
AGENDA ELECTRIC SECTIONS GENERAL.
EFRA ANNUAL GENERAL MEETING HOTEL Holiday Inn, Brussels Belgium 3rd to 4th of November 2012 AGENDA ELECTRIC SECTIONS GENERAL. 1. CHAIRMAN S WELCOME Mr. Heiner Martin & Mr. Paul Worsley The Electric Track
4.0.6 Approved motors may be modified by re-winding, balancing, truing of commutators, epoxy, ball bearings, brushes and custom brush systems only.
4.0 Motors Modified: Only brushed or brushless motors approved by IFMAR may be used. 4.0.1 Brushed Motors: General definition of a Brushed Motor: 4.0.2 Specifications; 05 sized displacement. Can diameter
AGENDA ELECTRIC SECTIONS GENERAL.
EFRA ANNUAL GENERAL MEETING HOTEL Sercotel Sorolla Palace Valencia, Spain 1 st and 2 nd of November 2014 AGENDA ELECTRIC SECTIONS GENERAL. 1. CHAIRMAN S WELCOME Mr. Heiner Martin & Mr. Paul Worsley The
Model Set A Figure A.1 1:144 Scale Cargo Launch Vehicle Overall Dimensions. 2.3 Dia Dia. 14.7
Model Set A Figure A.1 1:144 Scale Cargo Launch Vehicle Overall Dimensions 6 2.3 Dia. 1 Dia. 23.2 14.7 29.2 4 Faceted Shroud not curved Acrylic Fuselage SEP Rockets (4Ct) Detail Grooves (see below) 5 SSME
BRCA Approved Zero-Timing Blinky ESC s
The following list detils the speed controllers pproved for use in the stock clss during the BRCA 1/12 th Electric Circuit Ntionls nd the modes in which they must be run. This list is derived from the
Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
Regulations for the European Finals 2014
Regulations for the European Finals 2014 September 4th, 2014 September 7th, 2014 in Steyregg/Austria Older issues of these regulations lose their validity with this document! Table of Contents Preamble...
Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
AGENDA ELECTRIC SECTIONS GENERAL.
EFRA ANNUAL SECTION MEETING HOTEL Hesperia Sant Just Barcelona, Spain 31 st October and 1 st of November 2015 AGENDA ELECTRIC SECTIONS GENERAL. 1. CHAIRMAN S WELCOME Mr. Heiner Martin & Mr. Paul Worsley
Mfg / Motor Style 12V Comments Class 1 Class 2 Group B Scaleauto SC23 Home Set "white" FF gcm/12v, 1.1W/12v X X Scaleauto SC24
Mfg / Motor Style RPM @ 12V Comments Class 1 Class 2 Group B Scaleauto SC23 Home Set "white" FF-050 10000 45 gcm/12v, 1.1W/12v X X Scaleauto SC24 Home Set "white" FC-130 10000 100 gcm/12v, 2.5W/12v X X
2 Pole 1222MVA Turbo-Generator & 4 Pole 1690MVA Turbo-Generator
2 Pole 1222MVA Turbo-Generator & 4 Pole 1690MVA Turbo-Generator 27. August, 2008 Generator Design Team Chong Whie Cho 2008 CIGRE SESSION 42, Paris CONTENTS Introduction 2-Pole 1222MVA Generator - Specifications
LSN Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information
General information Non-sparking totally enclosed threephase asynchronous motors, LSN series, according to IEC 60034, 60072, IEC 60079-1 and 60079-15. Single speed: power 0.75 to 90 kw 1, frame size 80
EFRA ANNUAL GENERAL MEETING HOTEL Holiday Inn, Brussels Belgium 5-6th of November AGENDA ELECTRIC SECTIONS GENERAL. Sat
EFRA ANNUAL GENERAL MEETING HOTEL Holiday Inn, Brussels Belgium 5-6th of November 2011 AGENDA ELECTRIC SECTIONS GENERAL. Sat. 5.11.11. 1. CHAIRMAN S WELCOME Mr. Heiner Martin & Mr. Paul Worsley The Electric
Gasket Technology EXHAUST PIPE GASKETS OURPART# DISTRIB. DEALER COFFMAN PIPE
Exhaust Pipe Gaskets EXHAUST PIPE GASKETS OURPART# DISTRIB. DEALER COFFMAN PIPE KAWASAKI 550 CLIMAX KIT 9020K 750 SX ROCKET MOD HEADPIPE 9030 750 SS, Xi, ST ROCKET HEADPIPE 7100A 750 Xi (HURRICANE) HEADPIPE
CUSTOM SLOT RACING TIRES and accessories
CUSTOM SLOT RACING TIRES and accessories PRO-TRACK CORPORATION 125 CREEK CROSSING PORT ORANGE, FL 32128 U.S.A. PH/FX (386)763-5005 E-MAIL protrack@earthlink.net " IT IS THE LORD THAT TEACHES YOU TO PROFIT
contents about the range
contents Overview 3 Motor data PBL42 4 PBL60 5 PBL86 6 Technical information 7 Controller data S controller 9 N and B controllers 10 50B controller 12 EMC Directive compliance 13 Geared motors PBL42 motor
Ariel Atom Standard Hardware Build List
Brammo Grade and STAINLESS STAINLESS Key ITEM PN QTY Size Type Material Finish Detail TORQUE SPECS TORQUE SPECS TORQUE SPECS IN FT-LBS IN FT-LBS IN IN-LBS 0 (PT) Power train 1 PT 1 HF-M12-60 9 M12-1.75
Open continuous current (DC) motors MS 1 - MS 2. General information
MS 1 - MS 2 General information Open continuous current (dc) motors conforming to the IEC specifications. MS 1 : - frame size 80 to 132 mm, - power 0.44 to 8.85 kw. MS 2 : - frame size 112 and 132 mm,
Eastbourne Electric Car Club Tamiya M-Chassis Rules
Eastbourne Electric Car Club Tamiya M-Chassis Rules 1. Chassis 1.1. The only permitted chassis allowed in the Tamiya M-Chassis class are, M-03, M-05, M-06 and M-07 (including R, S Spec and Pro versions).
AIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
Corsair Motors THE NEW STANDARD
Corsair Motors THE NEW STANDARD Corsair Motors SURPASSING INDUSTRY STANDARDS IN CONSTRUCTION AND PERFORMANCE Summit ESP A Halliburton Service offers the new standard in electric submersible motors. Corsair
BY DAN JONES PRESIDENT OF INCREMOTION ASSOCIATES
BY DAN JONES PRESIDENT OF INCREMOTION ASSOCIATES I. HISTORY After WWII to 1992 Why Now? Why Electric Motors II. EISA VS. NEW 2016 RULE III. COMPETING MOTOR TECHNOLOGIES IV. MOTOR INTERNAL LOSSES V. STANDARDS
TUONO 125 RS125 RS 50
TUONO 125 RS125 RS 50 TUONO 125 UNCOVER THE EXCITEMENT, EXPERIENCE INCREDIBLE SENSATIONS IN TOTAL FREEDOM, WITH THE TUONO 125. ALL THE PERSONALITY AND TECHNOLOGY OF A SUPERBIKE, WITHOUT COMPROMISING ON
AIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
PLS Open Drip Proof three-phase asynchronous motors. General information
General information Open Drip Proof three-phase asynchronous motors, series PLS, according to IEC 60034, 60066, 60072 power 7,5 kw to 900 kw, frame size 160 to 400 mm, 2, 4, 6 and 8 ; 230/400 V or 400
Carbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
The Team Of United Racers
Director: Allan Arrington Objective: The Team Of United Racers The objective of our organization is limited to one primary goal. That is to coordinate rules for carpet oval 10 th & 12 th scale pan car
Standardmotoren Standard motors
Standardmotoren Standard motors Contents Product description 2/2 Overview of technical data 2/5 2 Series W4.R for Premium Efficiency IE3 2/6 Series WE.R for High Efficiency IE2 2/14 Series K2.R for Standard
Teepak Totally Enclosed Tube Ventilated High Voltage Induction Motors. A Regal Brand.
Teepak Totally Enclosed Tube Ventilated High Voltage Induction Motors A Regal Brand www.regalbeloit.com Specifications Range Poles Voltage : Upto 3000 KW : Upto 14 Pole : Upto 11000 Volt Frame : 450 1000
LSPXMV FCR Atmospheres containing explosive dust FCR asynchronous brake motors. General information
General information GENERAL USE : U.G. Enclosed three-phase brake asynchronous motors, LSPXMV series with failsafe brake, according to IEC 6003, 60072, EN 50281. Single speed : 0.25 to 11, frame size from
race FanS Rigid all metal fans provide maximum airflow at low and high RPM.
315 400 SerieS one PieCe molded FanS Molded nylon fans are ideal for race & performance applications when cost or weight is a concern. 14 Clockwise 414 15 Clockwise 415 16 Clockwise 416 17 Clockwise 417
Service Parts. John Deere 3029DF 3029TF 3029TF270. Engine. Engine Models: Generator Models: 20ROZJB REOZJB 20DSJB DSEJB.
Service Parts Engine Engine Models: John Deere 3029DF 3029TF 3029TF270 Generator Models: 20ROZJB 20--40REOZJB 20DSJB 20--40DSEJB TP- 12/03b Table of Contents Description Page Description Page Introduction...
LSES high efficiency three-phase asynchronous motors. General information
Efficiency class IE2 General information Totally enclosed three-phase saving asynchronous motors, series, according to IEC 60034, 60038, 60072 ; 0.75 to 200 kw, frame size 80 to 315 mm. Single speed: 2,4
Profiles and tyres. The Wheels. Wheels 07 Wheels 08 Wheels 09 Wheels 13 Wheels 14 Wheels 17 Wheels 18 Wheels 21. Types
The Wheels. Wheel 00 Wheels 0R Wheesl 0S Wheels 01 Wheels 03 Wheels 04 Wheels 06 Wheels 07 Wheels 08 Wheels 09 Wheels 13 Wheels 14 Wheels 17 Wheels 18 Wheels 21 Wheels 27 Wheels 29 Wheels 30 Wheels 32
Products & Services EQ Series AC Drives. TEAMMaster WOUND ROTOR MOTORS WORLD SERIES SYNCHRONOUS MOTORS. EXPLOSION PROOF (Division 1, Zone 1)
630-543-7867 Products & Services EQ7 1-1000 hp Intelligent Keypad with Extensive Diagnostics Select Any of 4 Control Methods - V/ Hz - Dynamic Torque - Sensorless Vector - Closed-loop Vector Quick Setup
carbon fiber before assembly. Sand glue to the edges and
chassis and carbon fiber give you a before assembly. Sand glue to the edges and 5 BAG MARKED CA BAG MARKED M3x6 Flathead 4 03 4 05 BAG MARKED 2 10 13 Installing Steering System Shock Assembly M4x28
2013 rules update - what does it mean for me?
For more information visit www.brca.org or www.wycomberacing.co.uk Or email chairman@wycomberacing.co.uk Compiled by Mark Goodchild 2013 rules update - what does it mean for me? Note: Written from the
Disc Brakes RO - DH. Order Line: ext 1 Fax: Features:
Disc Brakes RO - DH RO - WORLDWIDE THE ONLY BRAKE WITH OVAL CALIPER PISTONS! The RO is the newest brake from Formula, combining top brake performance with the elegant looks of an Italian design. The new
A Global View of. High Efficiency Electric Motors. By Dan Jones Incremotion Associates, Inc. Thousand Oaks, CA
A Global View of High Efficiency Electric Motors By Dan Jones Incremotion Associates, Inc. Thousand Oaks, CA 1 Motor Operation AC induction motors are our dominant motor technology in terms of consuming
7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675" pr GT RACING FRONT
RC10GT & RTR GT MC 9 McCOY GLOW PLUG 1 3.9 2661 CLUTCH NUT CLIPS 6.7 3216 WASHER, #4 12 1.00 3719 NYLON WIRE TIES, 6" heavy duty 12 2.00 3720 NYLON TIES, 8", light duty for receiver 12 2.00 3721 SELF-TAPPING
November 2017 RECONDITIONING SERVICES We race condition any brand armature. Every armature is ultrasonically cleaned, diamond trued, and precision rebalanced. We take the lightest cut possible to true
MOTORSPORT TYRES 2019
MOTORSPORT TYRES RACING TYRES RADIAL A00F/A00Y A00N A00G/A00C for GT CARS ADVAN /SLICK A40 20 1 20/R20 330/R1 3/0R1 300/0R1 20/0R1 240/0R1 N3 N3 1 330/R1 N2 330/R1 20/R1 300/0R1 20/0R1 N2 N220 320/0R1
Motorized Pulley 500L, 500M & 500H, Ø 500 mm
Motorized ulley 500L, 500M & 500, Ø 500 mm To match your requirements in diameter 500 mm, our product range offers three different loading performances for your BULK applications: - L for Light-duty -
MJH. Model. Up to kva. Power. Up to V. Voltages. Frame 400 ± Pole 4, 6, 8. (over contact MM) Cooling IC 01
MJH Model Power Voltages MJH Up to 12.500 kva Up to 15.000 V Frame 400 ± 1.250 Pole 4, 6, 8 Cooling IC 01 (over contact MM) IP Enclosure Main Applications Sector IP 23. Available up to IP 44 with filters.
LRP NEWS EXCLUSIVE NEW PRODUCTS AVAILABLE MORE DETAILS ON THE FOLLOWING PAGES... NOW AT YOUR LOCAL HOBBY SHOP
EXCLUSIVE NEW PRODUCTS AVAILABLE NOW AT YOUR LOCAL HOBBY SHOP DISTRIBUTION TO MORE THAN 60 COUNTRIES You can be one of the first holding these selected products in your hands! Ask your local hobby shop
Engine Builders / Racing Sonic Testers, Transducers & Accessories - Price List Date: 01/01/18
Engine Builders / Racing Sonic Testers, Transducers & Accessories - Price List Date: 01/01/18 The PR-8 Series of gauges are packaged in an all aluminum case making them the most durable gauges on the market.
SPARE PART LIST LIFTKET Version B13
Issue January 2014 SPARE PART LIST LIFTKET Version B13 SP-Code Description Description of spare part section Page AA Lifting gear 01: Hoist body 4-5 02: Clutch Brake 6-8 03: Stator 9-10 04: Gear 11-13
SUBARU IMPREZA WRX STI GRB & GVB
SUBARU WRX STI & COIL-OVER SUSPENSION KIT ZERO E (NORMAL) ZERO E (PILLOW) 69 60M CP 69 60M CP ZERO 1 (NORMAL) 69 60E CN 69 60E CN ZERO 1 (PILLOW) 69 60E CP 69 60E CP ZERO 3 69 63R CP 69 63R CP ZERO 3X
Info Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
PRICE LIST 84 July 2018 FREE RATE
PRICE LIST 84 July 2018 SPARE PARTS RETROFIT PARTS (options on MX products already in service) www.m-x.eu FREE RATE > to be ordered with ref 368960 Contents 1. GLOSSARY 3 2. MECHANICAL 5 3. HYDRAULICS
XRAY KITS M18 M18T M18MT PARTS NT18 NT18T NT18MT PARTS. o = option part x = standard included / fits
PRO LiPo PRO USE THE DROP MENU TO FILTER THE SELECTION XRAY KITS o = option part x = standard included / fits 38 0000 XRAY - 4WD SHAFT DRIVE 1/18 MICRO CAR 38 0003 XRAY PRO LiPo - 4WD SHAFT DRIVE 1/18
CPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm
95 Nm to 2900 Nm Introduction The range of IP23 protection CPLS asynchronous motors was designed for fixed and variable speed applications when there is little space available or (and) there is a wide
LSES high efficiency three-phase asynchronous motors General information
General information Efficiency class IE2 Totally enclosed three-phase powersaving asynchronous motors, LSES series, according to IEC 60034, 60038, 60072 ; power 0.75 to 200 kw, frame size 80 to 315 mm.
Open House SALE BUMPER SALE!! Everyone needs bumpers, we have them in stock & on Sale!
Sheet Aluminum 4 x 10 WRISCO 4ft x 10ft.040 thick Special Open House Pricing! $64.90 per sheet! Open House SALE BUMPER SALE!! Everyone needs bumpers, we have them in stock & on Sale! FRONT BUMPER w/ bracing
Welcome to NORTH-WEST Welcome to a Stylish Sturdy & Safe world. PDF created with pdffactory trial version
Welcome to NORTH-WEST Welcome to a Stylish Sturdy & Safe world A little about North-West Company promoted in 1987 Highly focused on developing High Quality and well designed Products Early Pioneers of
Motorized Pulley 630M & 630H, Ø in. (630 mm)
Our 24.80 diameter Motorized Pulley range fers two different performance levels for BULK applications: - M for Medium duty - H for Heavy duty It is important to note the product differences and choose
Customised drive solutions
Customised drive solutions Electric motors & systems Drive components Services Introduction 03 Halm quality drive technology Over 50 years of experience in developing electric motors with asynchronous
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
TWA S/K/P. Incorporating. R410A Air cooled water chillers with axial fans and scroll compressors from 189 kw to 1007 kw
TWA 212-1102 S/K/P Incorporating R410A Air cooled water chillers with axial fans and scroll compressors from 189 kw to 1007 kw The complete solution to all your cooling needs TWA 212-1102 S/K/P Index
SERVICE BULLETIN MANDATORY
652 Oliver Street Williamsport, PA 17701 U.S.A. Tel. 570-323-6181 Fax. 570-327-7101 www.lycoming.com MANDATORY SERVICE BULLETIN DATE: July 20, 2007 Service Bulletin No. 574A (Supersedes Service Bulletin
C13.10 CHRONO LOCKCASE AND PERIMETER LOCKING SET C13 SIDE HUNG WINDOWS
C13 SIDE HUNG WINDOWS CHRONO LOCKCASE AND PERIMETER LOCKING SET 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
GP1-R SPORTBIKE SUPERSPORT REAR FENDER KIT EXHAUST
Jardine's prized research and development department continues to exhibit excellence in design and fit! Manufacturing exhaust systems using the latest technology. High tech CMM and Vector Infrared Tracer
Galaxy blue. Signal blue
nomad nomad model NO 100 in white. Cardinal red Burgundy Orange White Off white sand Black Light blue Signal blue Galaxy blue Purple Signal green Dark green Beige Gold Brown Neutral grey Signal yellow
CONTENTS 1 GENERAL 2 STANDARDS. 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances
CONTENTS 1 GENERAL 2 STANDARDS 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances 4 MOTOR DESIGN 4.1 Stator Casing 4.2 Stator Core with Winding 4.3 Stator Winding and Insulation
PRODUCT GUIDE LANDSCAPE LIGHTING
PRODUCT GUIDE LANDSCAPE LIGHTING North America fxl.com FINISHES Metals AB Antique Bronze on Powder coat Standard AB Antique Bronze on Brass AT Antique Tumbled on AT Antique Tumbled on Brass CU BS Natural
ECEg439:-Electrical Machine II
ECEg439:-Electrical Machine II 2.2 Main Structural Elements of DC Machine Construction of DC Machines A DC machine consists of two main parts 1. Stationary Part (Stator):-It is designed mainly for producing
Basic Motor Theory. Introduction
Basic Motor Theory Introduction It has been said that if the Ancient Romans, with their advanced civilization and knowledge of the sciences, had been able to develop a steam motor, the course of history
Just what is an alternator?
Just what is an alternator? An alternator is the device used to produce the electricity the car needs to run and to keep the battery charged. The battery is the heart of your electrical system. But you
PAC TRAINING PUMP MOTORS
PAC TRAINING PUMP MOTORS 1 Basics Magnet supported from above N S N S Since unlike poles repel each other, the magnet will rotate Stationary Magnet 2 Basics N S Stationary Magnet 3 Basics N N S S Stationary
Pretest Module 21 Unit 4 Single-Phase Motors
Pretest Module 21 Unit 4 Single-Phase Motors 1. What are the four main components of a single-phase motor? Rotor, stator, centrifugal switch, end bells and bearings 2. How is a rotating field created in
THE MISSISSIPPI VALLEY H. O. RACING ASSOCIATION RULES & CLASSES
THE MISSISSIPPI VALLEY H. O. RACING ASSOCIATION 2015-2016 RULES & CLASSES General Rules 1. MVHORA racing starts in September with our first season running September thru December, then our second season
24h Verbano
Tecnical Rules Foreword I. This regulation is the comprehensive list of the conformity requirements of the Slot it car models entitled to race. Any modifications not listed are illegal. Some prohibitions
MIG/MAG welding gun range
MIG/MAG welding gun range Designed for comfortable and productive welding The best combination of weight and balance ensures welding craftsmen comfortably deliver their skill weld after weld. Choose from
PRODUCT GUIDE LANDSCAPE LIGHTING. fxl.com. A Hunter Industries Company
PRODUCT GUIDE LANDSCAPE LIGHTING A Hunter Industries Company fxl.com FINISHES Metals Powder coat Standard Powder coat Specialty s AB on copper AB on brass AT on copper AT on brass CU BS SS NP BZ DG WI
Double action door rails
The solution for heavy doors. Convincing in quality and design. CONTENTS Technical details 26-29 Materials and surface finishes 290 Product information 105 mm door rails: 55/65 mm pivot point 291-292 22/24