Stay up-to-date via RSS!

Transcription

1 Page 1 of 6 Stay up-to-date via RSS! enter keywords and hit en Search ROAR Approved Non-Timing Manufacture Part Number Name/Description Software Version Affiliate Tech Details Calandra Racing Concepts CRC4 Calandra Racing Concepts CRC4002 Advanced Electronics Black Diamond LV Advanced Black Diamond Castle Creations Mamba Max Pro V1.26 Dynamite DYNP1001 Graupner GmbH & Co. GM-Genius 120 Graupner GmbH & Co. GM-Genius 150 Graupner GmbH & Co. GM-Genius 75 Graupner GmbH & Co. GM-Genius 90 Hacker Motor GmbH TENSORIC10 Platinum Sensored Tensoric 10 Competition (160A) Hobbico DTXM1300 Duratrax DE10 Brushless Programable 2.1 software or higher 2.1 software or higher Software not upgradable Software Version V3.0_ Special Notes Has a blinking blue light when the throttle is in neutral and when set to the no-timing profile #1 Has a blinking blue light when the throttle is in neutral and when set to the no-timing profile #1 Blue LED flashes when throttle is at neutral in zero -timing mode. A blinking green LED will be displayed when the is at 0 (zero) degrees of timing and the throttle

2 Page 2 of (blue) or (black) (blue) or (black) Justock Club SPEC Xtreme Stock Xerun 60A-SD V2.1 (Blue) Xerun 60A-SD V2.1 (Black) Xerun 120A-SD V2.1 (Blue) Xerun 120A-SD V2.1 (Black) Xerun 120A-1S (Black) Xerun 120A-1S (Blue) XERUN-120A V3 XERUN-120A V3.1 KO Propo VFS-1 BMC Ver 1.5 KO PROPO America 4100 BLZ-350 Losi Losi LOSB9500 LOSB9503 1/10th Xcelorin MSC540BL-S Sensored, 13.5T Limit Flow Competition Flow Works Team Flow Works Team Ai Brushless Reverse Software V3.1_121129_beta Software V3.1_121129_beta Contact Mfg for Firmware Upgrade or 3.3 or 4.0 or or 3.3 or 4.0 or 5.0 is at neutral. Also, if the is at any advancement in timing the LED will be solid green Zero timing and nonadjustable must use Profile #2, red LED on power button flashes when throttle is at neutral in non-timing mode must use Profile #2, red LED on power button flashes when throttle is at neutral in non-timing mode on switch. Set to zero timing in firware. Cannot program any timing into signified by blinking color LED There is no timing function available with this. There is no LED indication. Zero timing the Blue LED flashes when the throttle is in neutral position The blue LED flashes when the throttle is in the neutral position Zero timing the Blue LED flashes when the throttle is in neutral position

3 Page 3 of Ai Brushless Pro Reverse SPX Brushless Super Reverse Crawler SPX Brushless Bullet Reverse Sphere SPX Zero SXX Comp V2 1.3, SXX TC spec V2 1.3, SXX Stock Spec Brushless SXX Stock Spec V2 4.2, SXX Mod and Stock Upgrade board Impact Brushless Racing V 3.1 Non-updateable; Zero timing when power profile is set to 0. Red LED will flash in neutral to indicate zero timing Mode 3 timing must be set to 0 signified by blinking blue LED in neutral Mode 3 timing must be set to 0 signified by blinking blue LED in neutral Non-updateable. Mode 3 timing must be set to 0 signified by blinking blue LED when in neutral. Desc: For Spec zero timing mode, both mode 2 (torque) and mode 3 (timing) must be set to zero. Blue LED will blink in neutral Zero timing-blue LED flashing indicated by blinking whie LED. Note this is different than previous s 1852 The Club NO timing in this NOV1708 GTB2 Sportsman Low Profile NOV1709 GTB2 Sportsman NOV1710 GTB NOV1711 GTB Spectrum NOV1712 Slyder Drift NOV1731 Havoc 1 Cell NOV1732 Havoc Sport NOV1733 Havoc 3S Brushless NOV1735 Havoc Pro NOV1740 Kinetic Racing Version 1.0 software or higher. The White LED will blink during the start up to OFF. The White LED will blink during the start up to (this can be run on 2S or 3S) No timing built into

4 Page 4 of 6 ORCA ORCA NOV1741 NOV1743 NOV1745 NOV1745 NOV1748 NOV1749 NOV1850 NOV1851 OES112V1 OES380VX Kinetic 1S Racing OVAL SPEC 1S Havoc Pro SC Havoc Pro SC w/xdrive GTB2 Low Profile W/XDRIVE GTB2 W/XDRIVE The Edge Brushless w/traxxas The Edge Brushless w/tamiya ORCA Vritra VX- 1Titanium Color ORCA Vrita VX Orange/Ti/Blue Savox Razor160A V1 Version 1.0 software or higher Version 1.0 software or higher Cirtix Stock Club Race Non-Programable EXT98802LPF LPF 2.1 (Carbon, Silver, Blue) V3 V3 V must be set at Timing Level = 1 or Zero Timing (default) must be set at Timing Level = 1 or Zero Timing (default) **Note, this will be shipping in August 2010 When NO timing in this. The White LED will blink while powered on. If the white led is on then timing is active. NOTE this is different than past 4s must be set at Timing Level = 1 or Zero Timing (default). The White LED will blink during the start up to OFF.. The White LED will blink during the start up to OFF. The White LED will blink during the start up to OFF.. The white LED will blink during start up to. The white LED will blink during start up to blue LED at neutral. Using ORCA program box, set the following settings: Timing 0 Degree, Turbo delay off, Turbo timing Off, Turbo interval to 0. Software version displayed on program box. indicated by blinking blue LED at neutral. Using ORCA Program box set the following settings. Timing 0 degree, Turbo delay off, Turbo timing off, Turbo interval to 0. Software version displayed on program box. blue LED at neutral No Timing adjustments- Signified by blinking LED

5 Page 5 of 6 EXT98802LPFSxx EXT98802PROSxx EXT98802PROxx GT2.1-EX (xx=color,carbon, Silver or Blue Version) GT2.1-ProStock (xx=color, Black or Blue Version) GT2-Pro (xx=color, Carbon, Silver or Blue Version) V V SP010 Reventon V20 SP043 Reventon V20 Speed passion SP048 Reventon Stock Club Race ST0 (stock0) SP060 Reventon V20 SP061 Reventon V20 SP063 Reventon V20 SP064 Reventon V20 SP162 Reventon V20 SP222 Reventon V20 Team 1755 Pulse Brushless Pro 2S Racing There is no timing in this, signified by blinking LED Zero timing-the white LED flashes when the throttle is in the neutral position. Note: The WHITE LED blinking on this is different than previous

6 Page 6 of 6 Team Powers Team Powers Team Powers ORI65101 ORI65102 ORI65109 ORI65120 TP-XPS TP-XPS TP-XPS/Sport Vortex R10 Pro (120A,1S-2S) Vortex R10 Pro (160A,2S-3S) Vortex R10 Race (90A,2S-3S) Vortex R10 Stock Zero Timing Pro-C-V1.2 Hardware Ver. 1.2 EL-C40A Hardware Ver. 1.2 Sport-C-70 Hardware Ver. 1.2 Tekin TT1152 Tekin RS Tekin TT1153 Tekin RS Pro Tekin TT1155 Tekin RS Gen2 Electronic Speed Control ** NOTE NEW SOFTWARE PROFILE** 223 ** NOTE: NEW SOFTWARE PROFILE V238 Viper RC Solutions 6VSVT01001 Viper VTX1 A55 Viper RC Solutions 6VSVT10011 Viper VTX10 A55 Viper RC Solutions 6VSVT10015 Viper VTX10 BE A55 Viper RC Solutions 6VSVT10R15 Viper VTX10 R A55 Viper RC Solutions 6VSVT10R20 Viper VTX10R BE A55 s where the white LED would be OFF to indicate zero timing Zero timing 1 the RED Zero timing 1 the RED Zero timing 1 the RED Zero timing-the Red LED Flashes when the is active and throttle in neutral position Green LRD at neutral. not firmware updateable green LED at neutral. not firmware updateable green LED at neutral. not firmware updateable. When in LOCKED no timing mode LED 3, 4, 5 will be on and When in LOCKED no timing mode LED 3, 4, 5 will be on and Zero timing locked SPEC mode- LED s 3, 4, and 5 flash for ROAR events. Unlocked zero timing is LED s 3, and 5 flashing 2011 ROAR Racing Powered by WordPress Imagination by CSSJockey