Performance Engine Kits fit the following cars:

Transcription

1 Performance Engine Kits fit the following cars: 106 XS/Xsi/Rallye Saxo Furio & VTR 205 Xs Xsara (1.4 & valve engines) 206 (All 1.4 & valve engines) ZX (1.4 & valve engines) 207 (All 1.4 & valve engines) C2/C3/C4 (1.4 & valve engines) 307 (All 1.4 & valve engines) 308 (All 1.4 & valve engines 100 BHP Sports Head Kit (A) Entry level for maximising the true potential of your car s engine performance. The kit consists of the following parts: Port Throttle body (ex) Jetex CAT back system Performance Cone filter BMC Coda induction kit Ashley Exhaust system Superchip (C) Platinum Plug Set Branch Manifold Injector cleaner Powder coated Rocker cover (ex) FSE Boost valve Total Kit Price = 435 Ex vat Inc Vat Want us to fit + FSE setup Delivery Mainland UK days Fitting time 4hrs Delivery EU country From Days bhp Fast Road Head kit (A) Giving you the best performance for your buck this kit is best suited to those competing in motor-sport events or the track-day die hard. We have in the past seen in excess of 135bhp with this kit, some 15bhp up on a standard 106/VTS. Gives bags of mid range grunt and peak power around 6800rpm. It does beg the question why you would do a 16v conversion!! INCLUDED WITHIN KIT Upgrade Options (B) St 3 Gas Flowed Head (ex) Steel Head gasket Ultimate Fast Road Cam Head bolts Steel Vernier Pulley Competition Head gasket Branch Manifold Cam belt FSE Boost Valve Sports Chip (C) Ported Throttle body Induction Filter Ported Inlet manifold Comp valve spring kit+ setting litres of oil/ 2 oil filters/ 2 litres Anti freeze 70.00

2 Platinum Plug Set Total Kit Price = Ex Vat Inc Vat Fitting Costs Delivery Mainland UK days Fitting time 8hrs Delivery EU country From Days 160bhp Race Spec Head Kit In order to squeeze every last ounce of power out of your engine, we have added our own light and compact quad 38mm throttle body kits into the engine. The throttle bodies are supplied with a Race breed Emerald K6 ECU. The throttle bodies are supplied with a Race breed Emerald K6. The Throttle bodies give lightening fast throttle response and peak power 7000rpm. The icing on the cake is the inclusion of a race breed ECU to ensure your race head kit works to its full potential while giving you the benefits of launch control and the capability to run 3 separate maps. It goes without saying the induction roar from these throttle bodies is enough to make the hairs on your neck stand on end. St 5 Big Valve Gas Flowed Comp Head gasket Head (ex) Rally Spec Road Cam Head bolts Steel Vernier Pulley Competition Head gasket Branch Manifold Cam belt mm Quad Throttle bodies Kit PT 41 Kent Cam Comp valve spring Kit litres of oil/ 2 oil filters/ 2 litres Anti freeze Jetex CAT back system Total Kit Price = Ex Vat Inc Vat

3 Fitting Costs Delivery Mainland UK days Fitting time 2-3 Days Delivery EU country From Days 200bhp Supercharger Head Kit It will come as no surprise that these tough little engines can more than cope with a full on Surpercharger kit. The plate simply bolts onto the front of the block. The Eaton unit is driven by a drive belt off the crankshaft pulley. Power is nothing short of stunning, giving a seamless wave of torque from around 1500rpm to 6000 rpm. The Race breed Emerald K6 ECU. The icing on the cake is the inclusion of a race breed ECU to ensure your race head kit works to its full potential while giving you the benefits of launch control and the capability to run 3 separate maps.

4 It goes without saying the induction roar from these throttle bodies is enough to make the hairs on your neck stand on end. gives you an up to date ECU to control every aspect of the engine s performance. 200+bhp in a light weight hot hatch gives you a power to weight ratio far in excess of any factory spec Evo or STi. St 5 Valve Gas Flowed Head (ex) Water Pump Supercharged Spec Road Cam Head bolts Steel Vernier Pulley Timing Belt Kit Manifold +heat wrap Cam belt Eaton Charger kit. (1) Engine rebuild sealant Wossner Low comp pistons litres of oil/ 2 oil filters/ 2 litres Anti freeze Competition head gasket Jetex CAT back system Emerald K6 ECU bhp Power pulley kit + forged Rods Bosch Super 4 Plug Set Pre built loom kit Remote oil cooler kit Total Kit Price = Ex Vat Inc Vat

5 Fitting Costs Delivery Mainland UK days Fitting time 3-4 Days Delivery EU country From Days (A)= Note: figures quoted are for 1600cc engine only. Kits do suit 1360cc engines but will be approx 20bhp less than the 1600cc power figures quoted. (B)=Additional options that will be required if fitting the kits yourself and other upgrade parts that will enhance performance and reliability. (C)= On newer lower emission cars ie 206/207/307/308/C2/C3/C4 the car will require a sports chip to be fitted. (1) Customer to supplies mini Eaton supercharger. Are avail at additional cost Please note the 1360cc aluminium engines are not suitable for the supercharger conversion. The only exception to this is when using the 1360cc cast iron block. ALL PRICE ARE EXCLUSIVE OF VAT (20%) UNLESS SPECIFIED LOOKING FOR COMPLETE ENGINE PACKAGES. PHONE FOE DETAILS