2015 LS PERFORMANCE ENGINES 5.3, LS1, LS2, LS3, LS7
|
|
- Archibald Gallagher
- 6 years ago
- Views:
Transcription
1 2015 LS PERFORMANCE ENGINES 5.3, LS1, LS2, LS3, LS7 CBM Motorsports LLC 2015 *FOR OFF-ROAD RACING ONLY, NOT FOR SALE IN CALIFORNIA FOR CA REGISTERED VEHICLES, NOT FOR USE IN CALIFORNIA. ** FOR SALE IN CALIFORNIA, FOR CA REGISTERED VEHICLES - APPROVED AND CERTIFIED BY CA RESOURCES BOARD.
2 LS Performance Engines CBM LS Performance Engines. After years of real world research and development CBM Motorsports has came up with specifications and parts combinations that provide reliable, high horsepower naturally aspirated LS Performance Engines. All CBM Motorsports LS Performance Engines are built in house by professional CBM engine builders. All engines come balanced, blueprinted and feature custom cylinder heads, CBM, Manley, Callies and/or GM blocks, connecting rods, crankshafts, rockers, pistons and springs. At CBM Motorsports we pride our company on Quality and Performance.
3 LS PERFORMANCE ENGINES 2015 INDEX LS PERFOMANCE ENGINES CBM 5.3 LS 5.3 LITER CBM LS1 5.7 LITER CBM LS2 6.0 LITER CBM LS3 6.8 LITER CBM LS7 7.0 LITER HYSSOP DRIVE RANCHO CUCAMONGA CA Paul Jr Black Widow CBM SC 440 LS7 I
4 LS PERFORMANCE ENGINES 5.3 LITER LS ,400 rpm 350 6,800 rpm The CBM 5.3 is a 5.3 liter fuel injected, naturally aspirated LS, it puts out RPM's and 350 ft-lbs of torque with a compression ratio of 9.5:1. This engine is fully balanced and blue printed. Technical Specifications: Engine Type: LS Small-block V8 Displacement: 323 ci Bore x Stroke (in) 3.18 x 3.62 (96 x 92) Block: Cast Aluminum or Iron with 6 bolt Cylinder Heads: Aluminum Compression Ratio: 9.5:1 Recommended Fuel: 92 Octane Base Package - $ GM Block. Computer & Harness. Coil Packs & Wires. Alternator, Water Pump & Belt Tensioner. Intake Manifold. Oil Pan. CBM Coil Covers. Fuel Rails, AN Fittings & Injectors. Mechanical Throttle Body. Options: Oil Pan: Gen 4 Camaro Style. GTO Style. Truck Style. Retro Style. 01
5 5.3 LITER LS 5.3 LS PERFORMANCE ENGINES Upgrades: Fuel System: Pierburg Fuel System - up to 500hp $ Bosh Fuel System - up to 600hp $ Aeromotive Fuel System - up to1000hp $ Aeromotive Eliminator Fuel System - up to1500hp $ Headers: Gibson LS Car Headers $ Gibson LS Sand Rail Headers $ Clutch Disk: Kennedy 8 Single Disk w/flywheel $ Kennedy 9 Double Disk w/flywheel $ McLeod 10" Double Disk w/flywheel $ Tilton 7.25" Quad Disk w/flywheel $ Factory Style Car Flexplate $ Power Steering: Sweet Power Steering Pump with on pump Reservoir $ Sweet Power Steering Pump with off pump Reservoir $ Pulley System: CBM Billet Pulley Package $ CBM Black Anodized Billet Pulley Package $ CBM Chrome Pulley Package $ CBM Full Chrome Package $ SALES x2003 TECH x
6 LS PERFORMANCE ENGINES 5.7 LITER LS ,800 rpm 350 6,800 rpm The CBM LS1 is a 5.7 liter fuel injected, naturally aspirated LS, it puts out RPM's and 350 ft-lbs of torque with a compression ratio of 10.25:1. This engine is fully balanced and blue printed. Technical Specifications: Engine Type: LS Small-block V8 Displacement: 346 ci Bore x Stroke (in) 3.90 x 3.62 (99 x 92) Block: Cast Aluminum with 6 bolt Cylinder Heads: Aluminum Compression Ratio: 10.25:1 Recommended Fuel: 92 Octane Base Package - $ GM Block. Computer & Harness. Coil Packs & Wires. Alternator, Water Pump & Belt Tensioner. Intake Manifold. Oil Pan. CBM Coil Covers. Fuel Rails, AN Fittings & Injectors. Mechanical Throttle Body. Options: Oil Pan: Gen 4 Camaro Style. GTO Style. Truck Style. Retro Style. 03
7 5.7 LITER LS1 LS PERFORMANCE ENGINES Upgrades: Horsepower: CBM/Comp Cams 450hp Camshaft $ CBM CNC 243 LS Cylinder Heads $ Headers: Gibson LS Car Headers $ Gibson LS Sand Rail Headers $ Fuel System: Pierburg Fuel System - up to 500hp $ Bosh Fuel System - up to 600hp $ Aeromotive Fuel System - up to 1000hp $ Aeromotive Eliminator Fuel System - up to 1500hp $ Clutch Disk: Kennedy 8 Single Disk w/flywheel $ Kennedy 9 Double Disk w/flywheel $ McLeod 10" Double Disk w/flywheel $ Tilton 7.25" Quad Disk w/flywheel $ Factory Style Car Flexplate $ Power Steering: Sweet Power Steering Pump with on pump Reservoir $ Sweet Power Steering Pump with off pump Reservoir $ Pulley System: CBM Billet Pulley Package $ CBM Black Anodized Billet Pulley Package $ CBM Chrome Pulley Package $ CBM Full Chrome Package $ SALES x2003 TECH x
8 LS PERFORMANCE ENGINES 6.0 LITER LS ,400 rpm 400 6,800 rpm The CBM LS2 is a 6.0 liter fuel injected, naturally aspirated LS, it puts out RPM's and 400 ft-lbs of torque with a compression ratio of 10.9:1. This engine is fully balanced and blue printed. Technical Specifications: Engine Type: LS Small-block V8 Displacement: 364 ci Bore x Stroke (in) 4.00 x 3.62 (101.6 x 92) Block: Cast Aluminum with 6 bolt Cylinder Heads: Aluminum Compression Ratio: 10.9:1 Recommended Fuel: 92 Octane Base Package - $ GM Block. Computer & Harness. Coil Packs & Wires. Alternator, Water Pump & Belt Tensioner. Intake Manifold. Oil Pan. CBM Coil Covers. Billet Fuel Rails, AN Fittings & Injectors. 90mm Billet Mechanical Throttle Body. Forged Rods & Pistons. Options: Oil Pan: Gen 4 Camaro Style. GTO Style. Truck Style. Retro Style. 05
9 6.0 LITER LS2 LS PERFORMANCE ENGINES Upgrades: Horsepower: CBM/Comp Cams Camshaft $ CBM CNC 243 LS Cylinder Heads $ Headers: Gibson LS Car Headers $ Gibson LS Sand Rail Headers $ Fuel System: Pierburg Fuel System - up to 500hp $ Bosh Fuel System - up to 600hp $ Aeromotive Fuel System - up to 1000hp $ Aeromotive Eliminator Fuel System - up to 1500hp $ Clutch Disk: Kennedy 8 Single Disk w/flywheel $ Kennedy 9 Double Disk w/flywheel $ McLeod 10" Double Disk w/flywheel $ Tilton 7.25" Quad Disk w/flywheel $ Factory Style Car Flexplate $ Power Steering: Sweet Power Steering Pump with on pump Reservoir $ Sweet Power Steering Pump with off pump Reservoir $ Pulley System: CBM Billet Pulley Package $ CBM Black Anodized Billet Pulley Package $ CBM Chrome Pulley Package $ CBM Full Chrome Package $ SALES x2003 TECH x
10 LS PERFORMANCE ENGINES 6.2 LITER LS ,900 rpm 424 6,800 rpm The CBM LS3 is a 6.2 liter fuel injected, naturally aspirated LS3, it puts out RPM's and 424 ft-lbs of torque with a compression ratio of 10.7:1. This engine is fully balanced and blue printed. Technical Specifications: Engine Type: LS Small-block V8 Displacement: 376 ci Bore x Stroke (in) 4.06 x 3.62 ( x 92) Block: Cast Aluminum with 6 bolt Cylinder Heads: Aluminum Compression Ratio: 10.7:1 Recommended Fuel: 92 Octane Base Package - $ GM Block. Computer & Harness. Coil Packs & Wires. Alternator, Water Pump & Belt Tensioner. Intake Manifold. Oil Pan. CBM Coil Covers. Billet Fuel Rails, AN Fittings & Injectors. 90mm Billet Mechanical Throttle Body. Forged Rods & Pistons. Options: Oil Pan: Gen 4 Camaro Style. GTO Style. Truck Style. Retro Style. 07
11 6.2 LITER LS3 LS PERFORMANCE ENGINES Upgrades: Horsepower: CBM/Comp Cams Camshaft $ CBM CNC L92 LS Cylinder Heads $ Headers: Gibson LS Car Headers $ Gibson LS Sand Rail Headers $ Fuel System: Pierburg Fuel System - up to 500hp $ Bosh Fuel System - up to 600hp $ Aeromotive Fuel System - up to 1000hp $ Aeromotive Eliminator Fuel System - up to 1500hp $ Clutch Disk: Kennedy 8 Single Disk w/flywheel $ Kennedy 9 Double Disk w/flywheel $ McLeod 10" Double Disk w/flywheel $ Tilton 7.25" Quad Disk w/flywheel $ Factory Style Car Flexplate $ Power Steering: Sweet Power Steering Pump with on pump Reservoir $ Sweet Power Steering Pump with off pump Reservoir $ Pulley System: CBM Billet Pulley Package $ CBM Black Anodized Billet Pulley Package $ CBM Chrome Pulley Package $ CBM Full Chrome Package $ SALES x2003 TECH x
12 LS PERFORMANCE ENGINES 7.0 LITER LS ,300 rpm 470 6,800 rpm The CBM LS7 is a 7.0 liter fuel injected, naturally aspirated LS, it puts out RPM's and 470 ft-lbs of torque with a compression ratio of 11.0:1. This engine is fully balanced and blue printed. Technical Specifications: Engine Type: LS Small-block V8 Displacement: 427 ci Bore x Stroke (in) x 4.00 (104.8 x 101.6) Block: Cast Aluminum with 6 bolt Cylinder Heads: Aluminum Compression Ratio: 11.0:1 Recommended Fuel: 92 Octane Base Package - $ GM Block. Computer & Harness. Coil Packs & Wires. Alternator, Water Pump & Belt Tensioner. Intake Manifold. Dry Sump Oil Pan. CBM Coil Covers. Billet Fuel Rails, AN Fittings & Injectors. 90mm Billet Mechanical Throttle Body. Forged Rods & Pistons. Options: Oil Pan: Gen 4 Camaro Style. GTO Style. Truck Style. Retro Style. 09
13 7.0 LITER LS7 LS PERFORMANCE ENGINES Upgrades: Horsepower: CBM/Comp Cams Camshaft $ CBM CNC LS7 Cylinder Heads $ Headers: Gibson LS Car Headers $ Gibson LS Sand Rail Headers $ Fuel System: Pierburg Fuel System - up to 500hp $ Bosh Fuel System - up to 600hp $ Aeromotive Fuel System - up to 1000hp $ Aeromotive Eliminator Fuel System - up to 1500hp $ Clutch Disk: Kennedy 8 Single Disk w/flywheel $ Kennedy 9 Double Disk w/flywheel $ McLeod 10" Double Disk w/flywheel $ Tilton 7.25" Quad Disk w/flywheel $ Factory Style Car Flexplate $ Power Steering: Sweet Power Steering Pump with on pump Reservoir $ Sweet Power Steering Pump with off pump Reservoir $ Pulley System: CBM Billet Pulley Package $ CBM Black Anodized Billet Pulley Package $ CBM Chrome Pulley Package $ CBM Full Chrome Package $ SALES x2003 TECH x
14 Brands INDEX
15 Customer Service Shipping Details: Most orders ship the SAME DAY!!! Custom-made parts may take longer. If tracking information is available it will be sent to your address when the order ships. If there is a delay in your order for any reason you will be notified via . Please understand Saturday, Sunday & Holidays DO NOT count as normal operating business days. Our normal operating hours are 9:00am-5:00pm Monday through Friday PST. If you would like to purchase multiple items we would be happy to combine shipping. If you would like your package INSURED please let us know and we would be happy to add it to the quote. How do I return/exchange an item? You can return any new or unused item within 14 days of the date your item was shipped and we will refund the full purchase price, exchange your item or credit your account. We cannot accept returns on custom ordered items. If your item included any "special offer free parts", these must be returned at the same time or their value may be deducted from your refund. A completed CBM Motorsports return/exchange form is required for all returns. Simply download the form here, fill out the form and place it in the box or boxes to be returned with the part(s) to be returned. Please mark the corresponding invoice number as clearly as possible on the outside of all the boxes being returned. This will help us process your return in a timely manner. Shipping address: CBM Motorsports 9252 Hyssop Drive Rancho Cucamonga CA USA Call, Fax, or Mail Us. Tech Help: x2004 9:00am to 1:00pm and 2:00pm to 5:30pm PST Monday through Friday, for help with parts installation or application. Please have all relevant vehicle information ready when you call. Order by phone: x2003 x2004 Fax your order: Mail in your order: CBM Motorsports 9252 Hyssop Drive Rancho Cucamonga CA USA SALES x2003 TECH x2004 INDEX
16 9252 Hyssop Drive Rancho Cucamonga CA. USA t f
Fastener Tightening Specifications Specification
2008 G6 Applies to: 3.5L Report a problem with this article Fastener Tightening s A/C Compressor Bracket Bolt Camshaft Position Actuator Assembly Bolt 16 Y 12 lb ft Camshaft Position Actuator Magnet Bolt
More information(936)
The M-90 ECM is the latest in high tech, high performance engine controls. The M-90 is bringing the newest technologies to the table including Drive by Wire (DBW), Variable Valve Timing, Wideband Knock,
More informationSECTION D Engine 6.0L Diesel
303-01D-i Engine 6.0L Diesel 303-01D-i SECTION 303-01D Engine 6.0L Diesel CONTENTS PAGE DESCRIPTION AND OPERATION Engine... 303-01D-2 303-01D-2 Engine 6.0L Diesel 303-01D-2 DESCRIPTION AND OPERATION Engine
More informationBUILD YOUR OWN HIGH PERFORMANCE ENGINE
GUIDES AND KITS BUILD YOUR OWN HIGH PERFORMANCE ENGINE WHAT IS THE TOTAL POWER PACKAGE SYSTEM? To get great performance out of any engine, all of the components must work together. For over 30 years, the
More informationBracket Kits & Accessories
WWW.STREETRODBRACKETRY.COM 1-866-330-0428 / 817-614-9659 Bracket Kits & Accessories When details matter A/C, ALT, P/S Brackets & Accessories Aluminum & steel fabricated bracket sets V-belt & multi-groove
More informationOfficial Powerdyne Model BD Supercharger and Kit Limited Warranty
Official Powerdyne Model BD Supercharger and Kit Limited Warranty Powerdyne Automotive Products Inc. warrants your new Powerdyne model BD Supercharger and installation kit to be free of defects in workmanship
More informationNavy Medium Navy Large Navy X Large Navy XX Large Navy XXX Large
WHITE POLO SHIRT PULLOVER FLEECE PULLOVER FLEECE 1/4 ZIP ROUSH MERCHANDISE 401677 Medium 401678 Large 401679 X Large 401680 XX Large ROUSH CREW SHORT SLEEVE T-SHIRT 401681 Navy Medium 401682 Navy Large
More informationPage 1 of 9 303-01C Engine 6.0L Diesel 2004 F-Super Duty 250-550/Excursion DESCRIPTION AND OPERATION Procedure revision date: 08/06/2003 Engine Printable View Engine Description The 6.0L diesel engine
More informationInstallation Instructions: Subaru CS600 & CS600X Long Block Block Assemblies
Part Number: 20000160, 20000161, 20000162, 20002503, 20002504, 20002505, 20002506, 20003488, 20003489, 20003490, 20007211, 20007212, 20007213, 20007705, 20007706, 20007707, 20007708, 20007709, 20007710,
More informationM-6007-A50NA Engine Specifications and Owner's Manual
M-6007-A50NA Engine Specifications and Owner's Manual Fordracingparts.com Techline 1-800-367-3788 Page 1 of 11 IS-1850-0377 Please visit www.fordracingparts.com for the most current instruction information.!!!
More information2013 Senoia Raceway Rulebook
2013 Senoia Raceway Rulebook E-mail tech questions to: johnnywalls31@yahoo.com BOMBER RULES BODY 1. All bodies must be stock steel bodies. No fiberglass or aluminum body panels allowed. Fenders and quarter
More information1 of 12 11/20/2016 9:32 PM
1 of 12 11/20/2016 9:32 PM Caution: After removing timing chain, do not turn crankshaft and camshaft separately, or valves will strike piston heads. Apply new engine oil to the sliding surfaces when Installing
More informationMSA BRITISH TOURING CAR CHAMPIONSHIP
MSA BRITISH TOURING CAR CHAMPIONSHIP HOMOLOGATION FORM FOR NGTC ENGINE Manufacturer FORD Manufacturer Designation Mountune Valid From 01-Jun-11 Engine General Number of cylinders 4 Arrangement I Stroke
More informationSTREET BIG BLOCK CHEVY
WORLD CLASS ENGINES OPTIONAL ALL-ALUMINUM MERLIN ENGINE WEIGHS ONLY 471 LBS. 509&540 There s nothing quite as in-your-face as a big-inch rat motor. With a much larger displacement than any factory big
More informationLS CHEVROLET CNC-PORTED HEADS FOR EXTRA POWER!
LS CHEVROLET WARHAWK 15 ALUMINUM CYLINDER HEADS Clearly the industry s most efficient replacement for the LS1 cylinder head, World s 15 Warhawk casting deliver more power than other aftermarket heads in
More informationGeneral Engine Rules Common to all Makes:
NEEDMORE SPEEDWAY 2017 CRATE LATE MODEL ENGINE RULES Engine in car must match manufacturer of body used. Example: Ford Thunderbird must run Ford Engine: Camaro must use Chevy Engine: Dodge Intrepid must
More informationPRESSURIZED PICKUP. Blower Basics: What You Need To Know About Supercharging by Ron Ceridono photos by Jason Scudellari
TECH INSTALL FABRICATE UPGRADE PRESSURIZED PICKUP Blower Basics: What You Need To Know About Supercharging by Ron Ceridono photos by Jason Scudellari Internal combustion engines have been around for some
More informationM-6007-B50/B51/XE3/XB3 Engine INSTALLATION INSTRUCTIONS
Please visit www.fordracingparts.com for the most current instruction information!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE
More informationRead all instructions before beginning machining or assembly.
A4 blocks now come with steel billet main caps only (all 5 are cross bolted. Aluminum replacement caps can be special ordered directly from Pro Gram Engineering phone (330) 745-1004. Head Studs: Head stud
More informationNew for YENKO/SC Stage II Corvette
New for 2019 YENKO/SC Stage II Corvette THE ULTIMATE CORVETTE EXPERIENCE... In 1969 the muscle car wars were in full swing, with GM, Ford and Chrysler each developing their own big-block powered performance
More informationGLENFORD LIONS CLUB AUGUST 1, 2015 GARDEN TRACTOR CLASSES weigh in at 10am pulling starts 11am LAWN STOCK CLASSES 12 HP AND UNDER-1050# adamsville
GLENFORD LIONS CLUB AUGUST 1, 2015 GARDEN TRACTOR CLASSES weigh in at 10am pulling starts 11am LAWN STOCK CLASSES 12 HP AND UNDER-1050# adamsville rules 16 HP AND UNDER -1050# adamsville rules SUPER STOCK
More information1991 Nissan 240SX. 2.4L 4-CYL - VINS [F,M,S] 1991 ENGINES Nissan 2.4L 4-Cylinder
NOTE: Use illustration for component reference. See Fig. 7. 1. Remove spark plug wires. Set No. 1 piston at TDC on its compression stroke. Remove vacuum hoses, electrical harnesses, connectors, and harness
More informationThis is my most popular Small Block Ford 347 Stroker Engine Combination
This is my most popular Small Block Ford 347 Stroker Engine Combination If you are trying to buy the most power with reliable parts for the least money, this is what I have come up with. The cast steel/iron
More information#100 TO #199 SPORTSMAN 1600 LIGHT BUGGY TECHNICAL SPECIFICATIONS
#100 TO #199 SPORTSMAN 1600 LIGHT BUGGY TECHNICAL SPECIFICATIONS DEFINITION 1600 Light Buggy is a one-person, limited 4-wheel car using Volkswagen type 1 stock components with a 1585 cc engine. All parts
More information2019 Class Rules Engine Masters Challenge
2019 Class Rules Engine Masters Challenge Early Iron TECHNICAL RULES Section 300 (NOTE: This class will use a cubic inch divider in scoring to compensate for varied engine displacement. Scored test rpm
More informationMM HiFlo ST Engines. 4 Cylinder Engines - M10. 6 Cylinder Engines - M30. Baby Six Engines - M20
MM HiFlo ST Engines 4 Cylinder Engines - M10 2002, 320i, 318i 85-4 Cyl SOHC Engines 2200 Sport Engine... 155 HP... 6495 800 2200 Rally Engine... 160 HP... 6995 800 2300 Rally Engine... 165 HP... 7995 800
More informationBilstein Modified Lite STARS JR Mod Lites Cup
Bilstein Modified Lite STARS JR Mod Lites Cup Modified Lite STARS Racing Series, LLC 128 Bruner Ave Somerset, PA 15501 Phone: (814) 442-1738 http://modlitestars.org/ The rules and/or regulations set forth
More informationKAT-A4691 Corvette C6 Z06 Vehicle Package ( 600+ HP ) ENGINE/EXHAUST TRANSMISSION BRAKES/SUSPENSION INTERIOR EXTERIOR. Katech Inc. Katech Performance
Katech Inc. In an industry that defines success one lap at a time, Katech has earned the trust and respect of racing s toughest competitors lap, after lap, after lap by providing responsive service and
More informationTORQUE SPECIFICATIONS
TORQUE SPECIFICATIONS TORQUE SPECIFICATIONS Application Ft. Lbs. (N.m) A/C Compressor Bracket Bolts Upper Vertical Bolt 16-21 (22-29) Horizontal Bolts 32-43 (43-58) A/C Compressor-To-Bracket Bolts 32-43
More informationLIMITED LATE MODEL RULES
LIMITED LATE MODEL RULES A. Any steel block ENGINE B. Any piston allowed C. Any steel crank (no titanium) D. Balancing permitted E. Polishing rods allowed F. Any steel rod (no titanium) G. Dry sump oil
More informationRULE BOOK DISCLAIMER DIXIE SPECIAL EVENT PONY RULES
RULE BOOK DISCLAIMER The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable requirements for such events. These
More informationUltra Street 2017 Rules
Ultra Street 2017 Rules www.mdra275.com BODY: Fiberglass/Carbon body panels are limited to hood, rear deck lid, fenders, doors, and bumpers. Cowl hoods may not be taller than half way point of the windshield.
More informationINSTALLATION INSTRUCTIONS AUTOMOTIVE PISTONS
Before balancing these pistons, be sure they are as you ordered. Used or altered parts cannot be returned for refund, credit or exchange regardless of the circumstances. In the event that your pistons
More information1999 Nissan Altima GLE
TIMING CHAIN CAUTION: If cylinder head is installed and timing chain is disconnected, DO NOT rotate camshaft or crankshaft; valves will contact pistons, resulting in bent valves. NOTE: Following procedure
More informationApplication / Price Guide 2007 v1
Application / Price Guide 2007 v1 CNC Ported Big Valve Cylinder Heads Retail Note KK3670 Subaru WRX STI EJ25 (2.5L) Pr. 3,849.00 KK3671 Nissan VQ35 (3.5L) Pr. 4,289.00 KK3672 Mitsubishi Evo VIII 4G63 (2.0L)
More information2013 CATALOG. Performance Parts for Aircooled Volkswagens
2013 CATALOG Performance Parts for Aircooled Volkswagens The original raised roof reinforced case. Our pent-roof performance case has all of the features that are needed for maximum performance on both
More informationDISASSEMBLED VIEWS. Disassembled Views. Engine Covers and Component Assemblies (1 of 2) (LF1, LFW or LFX)
2012 Cadillac CTS Wagon AWD V6-3.0L Vehicle > Engine, Cooling and Exhaust > Engine > Locations > Components DISASSEMBLED VIEWS Disassembled Views Engine Covers and Component Assemblies (1 of 2) (LF1, LFW
More informationSection 10 Chapter 6
Section 10 Chapter 6 24 Valve, 8.3 Liter Engine Identification Note: All coding used in the 8.3 Liter and 9 Liter engine manuals are Cummins engine codes. These engine codes have no meaning to New Holland
More informationPreview. gmperformanceparts.com
Preview the smart choice for power Investing in a GMPP crate engine is a smart choice. All engines are factoryengineered and built with brand-new parts from the block up. Our engines deliver greater power
More information8XXX Series. Typical Application Low-profile bellhousing mount, often with adapter. Hydraulic Release Bearings GEN3
8XXX Series Typical Application Low-profile bellhousing mount, often with adapter. Hydraulic Release Bearings GEN3 Tilton HRBs Advanced manufacturing Renowned Tilton quality Tilton offers a wide range
More informationAUTOMOTIVE CRATE ENGINES. Distributed exclusively by SpeedKore. Find additional info at speedkore.com
AUTOMOTIVE CRATE ENGINES Distributed exclusively by SpeedKore. Find additional info at speedkore.com WINNING HERITAGE Mercury Racing has a storied history of success in high performance marine and automotive
More informationEdelbrock E-Force RPM Carburetor Supercharger Chevrolet LS Engines
Carburetors and air cleaner sold separately. Edelbrock E-Force RPM Carburetor Supercharger Chevrolet LS Engines Rectangular Port Heads: 1511, 15111, 15113 Cathedral Port Heads: 1512, 15121, 15123 Page
More informationBlock & Side Cover 4-5. Crank, Piston & Rod 6-7. Cylinder Head 8-9. Cam & Valve train Carburetor / Manifold Flywheel & Ignition 14-15
Table of Contents 2-1-2005 Title Page Block & Side Cover 4-5 Crank, Piston & Rod 6-7 Cylinder Head 8-9 Cam & Valve train 10-11 Carburetor / Manifold 12-13 Flywheel & Ignition 14-15 Assembly & 6 Packs 16
More informationNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF FORD RACING PERFORMANCE PARTS. STOP! READ THIS!
STOP! READ THIS! THIS ENGINE REQUIRES RACING OIL THAT CONTAINS 1200 PPM (parts per million) ZDDP (zinc-dialkyl-dithio-phosphate). THIS ENGINE IS SHIPPED WITHOUT OIL! Page 1 of 6 Please contact the Tech
More informationIron GEN III - Technical Notes
DART Iron GEN III - Technical Notes Deck Height... 9.240" Bore... 4.000 & 4.125 Main Bearing Size... LS-1 (2.558" 2.559") Weight... 227lbs Largest Recommended Bore..... 4.185" Largest Recommended Crank
More informationEVERY JOB. QSL FOR OFF-HIGHWAY APPLICATIONS
EVERY JOB. QSL FOR OFF-HIGHWAY APPLICATIONS FOR OFF-HIGHWAY APPLICATIONS. There is no substitute for power when your equipment needs it. That s why Cummins QSL offers ratings from 280-365 hp and a torque
More informationCOMMERCIAL EQUIPMENT SERVICE CONTRACT MANUAL
LOEGERING COMMERCIAL EQUIPMENT SERVICE CONTRACT MANUAL FOR CATERPILLAR DEALERS EPG Insurance, Inc. P.O. Box 171199 Memphis, TN 38187-1199 2006 EPG Insurance, Inc. P. O. Box 171199 Memphis, TN 38187-1199
More informationFUEL PUMP CAMSHAFT TIMING CHECK
PUBLISHED: 26-FEB-2018 2010.0 RANGE ROVER SPORT (LS), 303-01 ENGINE - V8 S/C 5.0L PETROL FUEL PUMP CAMSHAFT TIMING CHECK (G1473740) GENERAL PROCEDURES 19.90.16 HIGH PRESSURE FUEL TIMING CHECK 5000 CC,
More information725 SOUTH LA CADENA DRIVE COLTON CA
D y n o T u n i n g 725 SOUTH LA CADENA DRIVE COLTON CA 92324 725 SOUTH LA CADENA DRIVE COLTON CA 92324 Pre Dyno Tuning Checklist We have created this dyno tuning checklist as a guide for you to follow
More information2019 SK Modified Open Engine Rules Supplement
2019 SK Modified Open Engine Rules Supplement 20E- 5 GENERAL ENGINE REQUIREMENTS Engine must be OEM cast iron V8 production block, or the Dart SHP Block. Cylinder heads must be OEM or Dart 10024266, and
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Acura Year and Model: TSX (2004-2008) This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationToothed belt, removing and installing
Toothed belt, removing and installing Special Tools and Equipment ^ 3212 spanner wrench ^ 3387 pin wrench ^ T40011 pin ^ T40026 locking pin ^ T40028 socket ^ T40030 camshaft adjuster gauge Removing Lock
More information4. Hickory little engine: 3000/1350 lbs. with driver. (3050/1375 with 500 gram pistons).
2018 Limited Late Model Stock Rules $1000 fine for tire soaking $100 fine for antifreeze The Limited Late Model Limited Division will run under the 2018 NASCAR Whelen All American Series Late Model Stock
More informationInitial Gold Medallion Application
SVRA Gold Medallion cars must be restored to their original condition and specifications. That is to say, to the same state as when it was originally produced and raced. Only racing options that were available
More informationFord 4.6L (2V) SPECIFICATIONS
Ford 4.6L (2V) SPECIFICATIONS General Specifications Item Specifications Silicone Gasket and Sealant F7AZ-19554-EA WSE-M4G323-A4 Premium Engine Coolant VC-4A, VC-5 in Oregon, CXC-10 in Canada ESE-M97B44-A
More informationCOMPONENT LOCATOR > DISASSEMBLED VIEWS
Page 1 of 45 2006 Pontiac Grand Prix 3.8L Eng Base Service Manual: ENGINE MECHANICAL - 3.8L COMPONENT LOCATOR > DISASSEMBLED VIEWS Fig 1: Engine Block Component Views Callout Component Name 100 Engine
More informationM-6007-Z363 Crate Engine Specifications and Owner's Manual
M-6007-Z363 Crate Engine Specifications and Owner's Manual!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. INSTALLATION INSTRUCTIONS: These instructions consist of (4)
More informationMONOPOSTO RACING Class Specification Formula Atlantic REVISED March 2008
MONOPOSTO RACING Class Specification Formula Atlantic REVISED March 2008 FORMULA ATLANTIC I. Engines A. Displacement -- over 1100 cc and below or equal to 1600 cc. Cars with rotary piston engines covered
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Nissan Year and Model: 2009- NISMO 370z This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationPERFORMER-PLUS CAMSHAFT / LIFTERS / LUBE KIT MODEL: 351-M/400 c.i.d. Ford V8 CATALOG #2172 INSTALLATION INSTRUCTIONS
PERFORMER-PLUS CAMSHAFT / LIFTERS / LUBE KIT MODEL: 351-M/400 c.i.d. Ford V8 INSTALLATION INSTRUCTIONS Please study these instructions carefully before installing your new camshaft. If you have any questions
More informationLS Chevy With Variable Valve Timing (VVT)
LS Chevy With Variable Valve Timing (VVT) S-Drive Pulley Kit INSTALLATION INSTRUCTIONS Before beginning the installation, please note: Please read all of the instructions thoroughly before beginning the
More informationINSTRUCTION MANUAL G-Surge Tank #40007, #40008 & #40009
FiTech Fuel Injection INSTRUCTION MANUAL Tank #40007, #40008 & #40009 Warning: Caution must be observed when installing any product involving fuel system parts or gas tank modifications. Work in a well
More informationGENERAL INSTRUCTIONS. PERFORMER-PLUS CAMSHAFT / LIFTERS / LUBE KIT MODEL: c.i.d. Chevrolet V8 Engines CATALOG #2117
Page 1 PERFORMER-PLUS CAMSHAFT / LIFTERS / LUBE KIT MODEL: 283-400 c.i.d. Chevrolet V8 Engines GENERAL INSTRUCTIONS PLEASE study these instructions carefully before beginning this installation. Most installations
More informationDownload Service & repair manual Yamaha F250, LF PDF Service Manual
Download Service & repair manual Yamaha F250, LF250 2006 - PDF Service Manual DOWNLOAD HERE "Download Service & repair manual Yamaha F250, LF250 2006 - PDF Service Manual Do you want to service & repair
More informationFUEL PUMP CAMSHAFT TIMING ADJUSTMENT (G )
PUBLISHED: 10-OCT-2017 2010.0 RANGE ROVER SPORT (LS), 303-01 ENGINE - V8 S/C 5.0L PETROL FUEL PUMP CAMSHAFT TIMING ADJUSTMENT (G1473741) GENERAL PROCEDURES 19.90.17 HIGH PRESSURE FUEL TIMING CHECK AND
More informationEngine Construction and Materials DFP 2011 Series
DEUTZ Fire Protection Engine Construction and Materials DFP 2011 Series General Basic Configuration Mounting Inline 4 cylinder, direct injection Pedestal feet with rubber isolators Cooling and Lubrication
More informationHeat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under 7500 rpm
PUSHRODS Small Block Chevrolet Swedged End Pushrods.080 Wall 1010 Steel Heat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under
More information512 HO M285 Engine (FrechW) Maybach Engine M285
512 HO M285 Engine (FrechW) 08-06-03 Maybach Engine M285 These technical training materials are current as of the date noted on the materials, and may be revised or updated without notice. Always check
More informationCLARKE FIRE PUMP DRIVERS. approved. listed MODELS. meets NFPA-20 Requirements
CLARKE FIRE PUMP DRIVERS Air Cleaner Direct Mounted, Washable, For Indoor Service Only Alternator Integral Regulator, 24V-DC, 40 Ampere, with Belt Guard Cooling Water Control Automatic At Local Control
More informationENGINE EQUIPMENT. For DC Wiring Interconnection To Alternator (S) 24V-DC, 40 Ampere, Engine Controller with Belt Guard
CLARKE FIRE PUMP DRIVERS MODELS DDFP-08FH DDFP-08FA DDFP-12FH APPROVED RATINGS BHP/kw FM-UL-ULC* SPEED (RPM) MODEL 1470 1760 2100 2350 DDFP- 420 509 552 570 08FA 313 380 412 425 DDFP- 468 575 669 708 08FH
More information2003 Taurus/Sable Workshop Manual
Page 1 of 24 SECTION 303-01A: Engine 3.0L (2V) ASSEMBLY 2003 Taurus/Sable Workshop Manual Engine Special Tool(s) Piston Ring Compressor 303- D032 (D81L-6002-C) Camshaft Bearing Set 303-017 (T65L-6250-A)
More informationSkirted GEN III - Technical Notes
DART Skirted GEN III - Technical Notes Deck Height... 9.240-9.450 STD or Raised cam, 9.750 9.950 Raised cam only Bore... 4.000 & 4.125 Main Bearing Size... LS-1 (2.558" 2.559") Weight... 115lbs 4.125 and
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Dodge Year and Model: 2010 Challenger This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationREGULATION OF YAMAHA SUNDAY RACE RACE 2017
1. ENGINE SPECIFICATIONS 1.1. Engine Type 4 Stroke Single Cyl 4 Stroke Single Cyl 4 Stroke Single Cyl 1.1.1. Displacement Up to 150cc Up to 150cc Up to 150cc 1.1.2. Engine Layout vertical vertical vertical
More informationPID Code/Condition: Description: Mack MP8-455M US17 Date: March 1, 2017
PID Code/Condition: 100-1770 Description: Mack MP8-455M US17 Date: March 1, 2017 High Torque MAXIDYNE Diesel Engine Maximum Horsepower 455 BHP [339 kw] Electronic Common Rail Fuel Injection V-MAC IV Total
More informationPOCKET BIKES UNLIMITED WHOLESALE DEALER PRICING
2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 32 33 34 35 36 37 38 39 40 4 42 43 44 45 46 47 4 -STROKE/ INFERNO COMPETITION KIT $ 98.00 $ 36.00 4 - STROKE INFERNO WIRE SET $ 39.00
More informationA/C Brackets. Chevrolet Front Runner SB Bright Front Runner with Power Steering $2030 SB Black Front Runner with Power Steering $1999
A/C s 11 New 170 amp Alternator Main Truss Tensioner With Power Steering Polished compressor Polished 170 amp alternator Polished Front Runner belt tensioner cover Polished Compressor Clutch Cover Hardware
More informationPro Iron Small Block - Technical Notes
DART Pro Iron Small Block - Technical Notes Deck Height... 9.025" Bore... 4.00" or 4.125" unfinished Main Bearing Size... 350 (2.45") & 400 (2.65") Weight... 175 lbs Largest Recommended Bore... 4.165"
More informationDISASSEMBLY. Engine. CAUTION: Remove the cylinder heads before removing the crankshaft. Failure to do so can result in engine damage.
303-01A-1 DISASSEMBLY Engine Special Tool(s) Remover, Crankshaft Vibration Damper 303-101 (T74P-3616-A) Special Tool(s) Crankshaft Socket 303-674 303-01A-1 Remover, Crankshaft Vibration Damper 303-773
More informationINSTALLATION INSTRUCTIONS
PERFORMER RPM CAMSHAFT / LIFTERS / LUBE KIT For 343-401 c.i.d. AMC V8 Engines CATALOG # 7132 INSTALLATION INSTRUCTIONS PLEASE study these instructions carefully before beginning this installation. Most
More informationSTUNNING PERFORMANCE WITH STRIKING ELEGANCE!
2017 STUNNING PERFORMANCE WITH STRIKING ELEGANCE! Available in two performance levels, SVE s 2017 High/Output Series and Sport Edition Supercharged Escalade Specialty Vehicles combine stunning performance
More informationP773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P773-2 For Model: M773LW2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the
More informationHolley GM LS Gen III & IV Street Single-Plane Intake Manifold Kits
Holley GM LS Gen III & IV Street Single-Plane Intake Manifold Kits 300-131 LS3 Street Single-Plane Intake Manifold, Carbureted/TB EFI 300-132 LS1/2/6 Street Single-Plane Intake Manifold, Carbureted/TB
More information1998 Saab 900 SE ENGINES Saab 2.0L & 2.3L 4-Cylinder
Removal & Installation See VALVE SPRINGS under CYLINDER HEAD under OVERHAUL. CAMSHAFT Removal 1. Rotate crankshaft until "0" mark on flywheel aligns with timing mark on flywheel cover. Remove inspection
More informationThomas Built Buses Saf-T-Liner C2 Propane marks the return of Powertrain Integration to the propane autogas Class C bus marketplace.
Thomas Built Buses Saf-T-Liner C2 Propane marks the return of Powertrain Integration to the propane autogas Class C bus marketplace. Returning the legendary big block to its key role in pupil transportation
More informationLarry King Law s Langley Speedway 2018 Super Street Division Rules
Larry King Law s Langley Speedway 2018 Super Street Division Rules 1. COMPETING MODELS: A. Any American made 1979 through 1988 two door, coupe with a minimum 108 inch wheelbase. B. Cars must have a full
More informationmirrors with For 74 H-D rigid For Sportster H-D swingarm.
PRE- ORDER NOW! SHIPS DEC 31 QUICK RELEASE SEAT PINS These solo seat mounting brackets eliminate having to weld your own mounts. 82-72 For 74 H-D rigid. 82-73 For Sportster H-D swingarm. 82-73 Threads
More informationValve Rocker Arm and Push Rod Installation (6.2L LS3)
9. Tighten the cylinder head bolts: 10.1. Tighten the M11 cylinder head bolts (1-10) a first pass in sequence to 30 N m (22 lb ft). 10.2. Tighten the M11 cylinder head bolts (1-10) a second pass in sequence
More information1989 Nissan 300ZX. 3.0L V6 - VIN [H] & 3.0L V6 TURBO - VIN [C] 1989 Engines - 3.0L & 3.0L Turbo V6
INTAKE MANIFOLD Removal 1. Release fuel system pressure. Disconnect battery and drain cooling system. Disconnect vacuum and coolant lines attached to intake manifold and label accordingly. Remove throttle
More informationNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF FORD RACING PERFORMANCE PARTS.
Please visit www.fordracingparts.com for the most current instruction information!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE
More information122 Fasola Road, Sequim Wa (360) Morgan +4 Engine Rebuild Brochure
122 Fasola Road, Sequim Wa 98382 (360) 582-9020 Morgan +4 Engine Rebuild Brochure This brochure is intended to show the extensiveness of the work performed on the TR engines that I rebuild. I treat each
More information2018 New Egypt Speedway Street Stock Division Rules I. General
2018 New Egypt Speedway Street Stock Division Rules I. General A. The New Egypt Speedway Street Stock class is intended to be a low budget/entry level division. The intent is to keep costs low by using
More information2003 F-Super Duty /Excursion Workshop Manual
Page 1 of 16 SECTION 303-01C: Engine 7.3L Diesel DISASSEMBLY Procedure revision date: 05/21/2002 Engine Printable View (1761 KB) Special Tool(s) Cylinder Head Lifting Tool (D94T-6000-B) 303-D098 Damper
More information2000 Nissan Altima SE
Removal 1. Release fuel pressure. See FUEL PRESSURE RELEASE. Drain coolant from radiator and cylinder block. Drain engine oil. Disconnect all necessary coolant hoses, electrical connectors, vacuum hoses,
More informationENGINE REPAIR 966H (TAL/A6J/A6G) OPTIONS
966H (TAL/A6J/A6G) OVERVIEW S OUT OF FRAME Cylinder Packs Main Bearings Standard Big End Bearing Standard Thrust Plates Fuel Filter Filter Assembly - Water Separator Cap-Pressure (Radiator) Engine Oil
More informationM-6007-X302E 340 HP Crate Engine GUIDE
Please visit www.fordracingparts.com for the most current instruction information!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE
More information2018 Senoia Raceway Rulebook Limited Late Model
All drivers must adhere to the general rules, in addition to the division specific rules set forth below. Senoia Raceway Limited Late division allows four engine packages. A. 604 Crate Engine 2250lbs 8
More information2003 Nissan-Datsun Truck Frontier 4WD V6-3.3L (VG33E)
1 of 15 8/7/2016 2:34 PM 2003 Nissan-Datsun Truck Frontier 4WD V6-3.3L (VG33E) Vehicle» Engine, Cooling and Exhaust» Engine» Cylinder Head Assembly» Service and Repair» Removal and Installation 2 of 15
More informationShort Block Contains. Long Block. Crankshaft Connecting Rods Pistons Camshaft Timing Gears. Same as short block plus. Cylinder heads Lifters Push Rods
Short Block Short Block Contains Crankshaft Connecting Rods Pistons Camshaft Timing Gears Long Block Same as short block plus Cylinder heads Lifters Push Rods Displacement Volume of all cylinders swept.
More informationInstallation Instructions. Part #65100
Installation Instructions Part #65100 Perfect Performance Products, LLC Painless Performance Products Division 2501 Ludelle Street Fort Worth, TX 76105-1036 800-423-9696 phone 817-244-4024 fax Web Site:
More information