Bracket Kits & Accessories

Transcription

1 / Bracket Kits & Accessories When details matter A/C, ALT, P/S Brackets & Accessories Aluminum & steel fabricated bracket sets V-belt & multi-groove set-ups Alternators, compressors P/S pumps, pulleys, belts Made in the USA Date: 2/01/2012

2 Page 2 To Order Call: (817) Or Billet Aluminum Brackets MADE IN THE U.S.A. We believe the functionality, durability, and unique aesthetics of our 1000 series aluminum bracket kits, set us apart from the rest of the industry. We use aircraft quality 6061-T6 aluminum. We then profile and machine the parts 360 degrees to completely remove the exterior factory surface to insure a top quality finish. Available for small block Chevy, short or long water pump set-up. Great for narrow hood applications. Two finishes are available. Polished: reveals a show quality polished finish. Machined: This allows you to choose your own finish. You can have them brush finished or chromed. You can even paint, or powder-coat them to match your engine color. Which ever option you choose we know you ll be pleased with the perfect fit, alignment, and appearance these brackets will add to you engine compartment.

3 Small Block Chevrolet Cylinder Head Accessory Bolt Hole Locations Page 3 GM GEN thru 1968 GM GEN thru 1986 GM GEN UP 1987 thru /8 intake to head bolts angled except two on each side in center of intake, they are straight down GM GEN UP Same accessory bolt hole pattern as above, but intake bolt size and pattern changed from up. 5/16 intake to head bolts, all straight down. No longer any center bolts GM GEN thru 1991 Corvette aluminum GM GEN thru 1996 LT-1 GM GEN 1- ZZ4 3/8 angled intake to head bolts GM GEN 1- Aluminum FASTBURN heads 5/16 intake to head bolts are straight down

4 Page 4 Billet Aluminum A/C and Alternator Brackets Small Block Chevy/Short Water Pump/V-Belt 12-3/ BP Shown w/ optional P/S kit 201-P The 1000 series Billet Aluminum bracket kits. Complete with a/c and alternator brackets, and all necessary hardware. Kits use the 508 style compressor with optional output ratings and port configurations. Alternator options are the standard GM 10SI, or the 2 o clk small case GM CS-130. Both are available with 1or 3 wire connections and multiple amp ratings. These kits require accessory bolt holes in the end of the cylinder heads. GM GEN 1, 1969-up and most aftermarket heads. See page 3 for head bolt pattern. Accessories sold separately and available in various finishes BP/polished finish -10SI alternator $ BM/machined finish -10SI alternator $ BP/polished finish - CS130 alternator $ BM/machined finish - CS130 alternator $291.00

5 Page 5 To Order Call: (817) Or Aluminum A/C & Alternator Brackets/V-Belt /4 Shown with optional P/S kit 202-P 1003 Billet Aluminum A/C and Alternator bracket kit. Complete with both brackets and all necessary hardware. Available in polished or machined finish. Fits GEN I small block Chevy engines with short water pump and 1987 & up center bolt valve cover cylinder heads, and most aftermarket heads. See page 3 for head bolt pattern. Kit uses the 508 style compressor with optional output ratings and port configurations. The alternator is the 2 o clk small case GM CS-130. Available with 1or 3 wire connections and various amp ratings. Accessories available in natural, polished, or chrome finish. Accessories sold separately BP polished finish $ BM machined finish $295.00

6 Page 6 To Order Call: (817) Or Aluminum A/C & Alternator Brackets Small Block Chevy/Long Water Pump/V-Belt 12-3/4 Kit 1102-BP Shown 1100 series Billet Aluminum A/C & Alternator bracket kits. Complete with both brackets and all necessary hardware. Kits use the 508 style compressor, with optional output ratings and port configurations. Alternator options are the standard GM 10SI, or the 2 o clk small case GM CS-130. Both are available with 1or 3 wire connections and multiple amp ratings. Kits require accessory holes in the end of the cylinder heads. GM GEN up, and most aftermarket heads. See page 3 for head bolt pattern. Accessories sold separately and available in natural, polished, or chrome finish BP/polished finish -10SI alternator $ BM/machined finish -10SI alternator $ BP/polished finish - CS130 alternator $ BM/machined finish - CS130 alternator $299.00

7 / Page 7 Aluminum A/C & Alternator Brackets Multi-Groove Belt 13-3/4 Kit 1004-BP shown with black pulleys and optional P/S kit 204-P 1000 series Billet Aluminum A/C & Alternator bracket kit with multi-groove belt. Comes complete with both brackets, crankshaft, water pump, and alternator pulleys. Fits small block Chevy with short reverse rotation water pump. 508 style compressor, GM 10SI alternator, or the 2 o clk small case GM CS-130. Both available with 1or 3 wire connections and multiple amp ratings. Requires accessory holes in the end of the cylinder heads. GM GEN up, and most aftermarket heads. See page 3 for head bolt pattern. Accessories sold separately and available in natural, polished, or chrome finish BP/polished finish - 10SI alternator $ BM/machined finish - CS 130 alternator $ BP/polished finish - 10SI alternator $ BM/machined finish - CS 130 alternator $495.00

8 Page / Steel A/C & Alternator Brackets Small Block Chevy/Short Water Pump/V-Belt 13-1/ B shown 2000 series Steel A/C & Alternator bracket kits. Fits Small Block Chevy/short water pump/v-belt, 508 style compressor, GM 10SI alternator, or the 2 o clk small case GM CS-130. S/S crossed adjusting bars. No accessory head bolt holes required. Accessories sold separately B/natural finish/10si alternator $ BP/black pwd.coat finish/10si alt. $ B/natural finish/cs 130 alternator $ BP/black pwd.coat finish/cs130 alt. $210.00

9 To Order Call: (817) Or Page 9 Steel A/C & Alternator Brackets Small Block Chevy/Short Water Pump/V-Belt 12-1/ B shown 2000 series Steel A/C & Alternator bracket kits. Fits Small Block Chevy/short water pump/v-belt, 508 style compressor, GM 10SI alternator, or the 2 o clk small case GM CS-130. S/S straight adjusting bars. No accessory head bolt holes required. Accessories sold separately B/natural finish/10si alternator $ BP/black pwd.coat finish/10si alt. $ B/natural finish/cs 130 alternator $ BP/black pwd.coat finish/cs 130 alt. $210.00

10 Page / Steel A/C & Alternator Brackets Multi-groove Belt 2009-B Shown w/black pulleys 2000 series Billet Aluminum A/C & Alternator bracket kit with multi-groove belt. Comes complete with both brackets, crankshaft and water pump pulleys. And your choice of straight or crossed adjusting bars. Pulleys also available in polished finish. Fits small block Chevy with short reverse rotation water pump. 508 style compressor, GM 10SI alternator, or the 2 o clk small case GM CS Both available with 1or 3 wire connections and multiple amp ratings. Accessories sold separately and available in natural, polished, or chrome finish B/natural finish/10si alternator $ BP/black pwd.coat finish/10si alt. $ B/natural finish/cs130 alt. $ BP/black pwd.coat finish/cs130 alt. $ Polished Pulleys/ add $ 35.00

11 / Page 11 Low Mount Steel Alternator Brackets 2005-A Steel Alternator bracket kit for small block Chevy short water pump GM 10SI alternator V-belt 10-1/ A natural finish $ / A Steel Alternator bracket kit for small block Chevy short water pump GM CS-130 alternator V -belt 10-1/ A natural finish $ /2

12 Page 12 To Order Call: (817) Or Steel Power Steering Brackets/V-Belt 201-P Steel P/S pump bracket kit for small block Chevy, short water pump set-up. Uses GM Type II P/S pump with remote reservoir. Mounts low on drivers side. Requires 3 groove crankshaft pulley or GM add on crankshaft pulley #1232P. Belt runs in 3 rd outer groove of crankshaft pulley. Comes complete with brackets, mounting hardware, and stainless steel adjusting bar. P/S pumps and pulleys sold separately. 201-P natural finish $89.95

13 / Page 13 Steel Power Steering Brackets/V-Belt Steel P/S pump bracket kits for small block Chevy, short or long water pump set-up. Uses GM Saginaw P/S pump with psi and return ports at 7 & 8 o clk positions when viewed from rear. Mounts low on drivers side. Requires 3 groove crankshaft pulley. GM add on crankshaft pulley #1232P for short pump. Belt runs in outer groove of crankshaft pulley on short pump and inner groove on long pump set-up. Comes complete with brackets and mounting hardware. P/S pumps and pulleys sold separately. 203-P natural finish $ P natural finish $69.95

14 Page 14 To Order Call: (817) Or Aluminum Power Steering Brackets/V-Belt 202-P Billet Aluminum P/S pump bracket kit. For small block Chevy, short water pump set-up. Uses GM Type II P/S pump with remote reservoir. Mounts low on drivers side. Requires 3 groove crankshaft pulley or GM add on crankshaft pulley #1232P Belt runs in 3 rd outer groove of crankshaft pulley. Comes complete with brackets, mounting hardware, and stainless steel adjusting bar. P/S pumps and pulleys sold separately. 202-PP polished finish $ PM machined finish $121.95

15 / Page 15 Steel Power Steering Brackets Multi-Groove Belt 204-P Steel P/S pump bracket kit for small block Chevy, short reverse rotation pump set-up. Uses GM Type II P/S pump with remote reservoir. Mid-mount on drivers side. Uses multi-groove belt. Compatible with SRB pulleys and the 1000 and 2000 series multi-groove a/c and alternator bracket kits. Comes complete with brackets, mounting hardware, and stainless steel adjusting bar. P/S pumps and pulleys sold separately. 204-P natural finish $85.00

16 Page 16 To Order Call: (817) Or Steel Chevy Six Cylinder A/C Bracket/V-Belt 5001 Steel A/C compressor bracket kit for GM GEN 3 four(153c.i.), and six cylinder(194,230,250, and 292C.I.) engines. Uses the 508 style compressor. Requires a two groove pulley set-up. Some small and big block short water pump pulleys will work as long as both grooves are the same diameter and your water pump flange has dual bolt patterns. Fan and spacer bolt patterns need to match. We recommend using a six blade fan of the largest diameter possible for added cooling capacity. Comes complete with bracket and mounting hardware natural finish $ C w/natural finish Sanden compressor $ (Other compressor options available)

17 / Page 17 Steel Chevy Stove Bolt Six Cylinder A/C Bracket/V-Belt Steel A/C compressor bracket kit for the GM GEN II 6 cylinder engines, (1937 thru C.I. 235C.I. and 261C.I.). Uses the 508 style compressor. Does not require dual groove pulleys. Compatible with headers and four barrel or dual carburetor set-ups. Will not work with most three carburetor set-ups. Comes complete with bracket and all necessary mounting hardware. Accessories available separately natural finish $ C w/natural finish Sanden compressor $ (Other compressor options available)

18 Page 18 To Order Call: (817) Or GEN III and GEN IV LS Series A/C Bracket This one piece LSX A/C compressor bracket kit, quickly and easily mounts a 508 style compressor to your GM LS series engine. The compressor runs in the same belt loop as all other OEM accessories utilizing the factory brackets and eliminating not only the OE compressor, belt, and tensioner, but also the OE compressor clearance issues commonly associated with retro-fitting the LSX engine into various vehicles. This kit is available in three different alignment options, covering virtually all LSX and crate engine accessory configurations and vehicle combinations. Can also be added to your existing accessory set-up and used as an ON BOARD AIR COMPRESSOR bracket. Comes complete, belt included. Accessories available separately CT 4.8L/5.3L/6.0L truck engine $ CM Camaro/ Firebird/ GTO engine $ CV Corvette engine $195.00

19 / Page 19 Oldsmobile 303C.I. and 324C.I. 324-B Steel A/C, Alternator, and P/S bracket kit for 1949 thru C.I. and 324C.I. Oldsmobile engines. Uses the 508 style compressor, GM CS-130 alternator with various amp ratings available, GM Type II power steering pump, with or w/o pump mounted reservoir. Uses OEM three groove water pump & crankshaft/balancer pulleys & OEM exhaust manifolds. New three groove pulleys available. Comes with all brackets, belts, & hardware. Accessories available separately. 324-B natural finish/bracket kit $ BA bracket kit w/accessories $ BC brackets/accessories & pulleys $

20 Page 20 Ford Big Block 429 / 460 / B Billet Aluminum A/C, Alternator, & Power Steering kit for the 385 series Big Block Ford 429/460/ 514. This kit uses 6061 T6 billet aluminum for the brackets, pulleys, & covers, & stainless steel hardware. A single 6 groove serpentine belt with spring loaded tensioner for proper belt tension & bearing loads. Very compact design for maximum clearance. Comes complete w/ Sanden SD7 compressor, CS amp alternator, TC type II p/s pump, (available w/ or w/o pump mounted reservoir) all pulleys, covers, belt & hardware.!!!call for custom ordering and options!!! 3001 B polished finish $ BM machined finish $

21 To Order Call: (817) Or Page 21 Accessories - Alternators GM 10SI Alternators 100 amp/1 or 3 wire New N natural $ C chrome $ Remanufactured NR natural $ CR chrome $ All alternators are manufactured with GM CS-130 Alternators New 105 amp/1 or 3 wire N natural $ C chrome $ New 120 amp N natural $ C chrome $ New 140 amp N natural $ C chrome $ Remanufactured NR natural $ CR chrome $ the best quality components available They produce 10% more idle amperage than an average alternator V-belt or Multi-groove pulley All Alternators have a 1 yr warranty Ford, Mopar, and other alternators available Sanden Compressors SD5, SD7, SD7B10 & more V-belt or Multi-groove Rear or Top port Accessories - Compressors Natural finish $ Polished finish $ Aftermarket Sanden Style Compressors Natural finish $ Chrome finish $ Various compressor models available All compressor have a 1 yr warranty

22 / Page 22 Accessories/GM OEM Steel Pulleys/V-Belt 4043P GM 6-3/4 2 groove crankshaft pulley Short water pump $ P GM 6-3/4 crankshaft pulley Add-on 3rd groove/for power steering Short water pump $ P GM 6-1/8 2 groove water pump pulley Short water pump $ P - Power steering pump pulley Single groove/press-on $ P - Power steering pump pulley Double groove/press-on $ P - Power steering pump pulley Double groove/bolt on $48.95

23 Page 14 STREET ROD BRACKETRY 1100 Jaybird Rd. Springtown, TX Order: am to 5 pm Mon. Fri. CST Tech: am to 5 pm Mon. Fri. CST Tech customerservice@streetrodbracketry.com Warranties: The original manufactures warranty constitutes all of the warranties applied to each non Street Rod Bracketry manufactured item sold. At our option, Street Rod Bracketry will repair or replace any Street Rod Bracketry manufactured item found to be defective in material or workmanship. No monetary refund will be awarded except in the event an incorrect product application was received, then, only if Street Rod Bracketry cannot provide correct application product. Street Rod Bracketry will not be liable for any personal or property damages caused by use or misuse of any product we sell or manufacture. No other warranties are expressed or implied. Returns: All returns must be made within 30 days from purchase date. All returns after 30 days will be charged a 10% restocking fee. No returns accepted after 6 months from purchase date. All returns must have RGA# (return goods authorization; call for RGA#) on shipping label. Must be accompanied with copy of invoice. Must be freight pre-paid. Street Rod Bracketry will only pay return shipping charges in cases of our error. No C.O.D. or missing RGA# packages will be accepted. All returned parts must be in new condition. Parts that have been installed or attempted to install cannot be returned. Freight Damage Claims: Freight damage claims must be made to the carrier. Always inspect shipment immediately upon receipt. Notify delivery driver & have them document any damages. Notify carrier immediately of any damages. Keep all packaging for carriers inspection. Do not return any damaged items until inspected by carrier. Texas Sales Tax: All products shipped or billed to a Texas address will be charged appropriate Texas sales tax, with the exception of exempt or resale certificate holders.

24 When details matter Street Rod Bracketry provides car enthusiasts with unique, affordable, and practical automotive accessory mounting options. About Us Street Rod Bracketry started as a division of R. D. Tooling, Inc. R. D. Tooling has been in business for ten years, working with major commercial bracket manufacturers providing machine shop tooling, along with design and manufacturing services. A personal passion for building hot rods has resulted in the creation of a unique line of bracket systems for the street rod, hot rod, & muscle car enthusiast. Over 40 years of engineering, repair, and design experience in the automotive and truck industry equips our team to design and produce quality bracket products with the professional builder as well as the "do-it-your-selfer" in mind. With our background in design and manufacturing, we understand the complexities of building and fabricating necessary support systems that are clean, unique, functional, and affordable, all at the same time. We design and build our own bracket products, right here in the UNITED STATES OF AMERICA / Street Rod Bracketry C/O R. D. Tooling, Inc Jaybird Road Springtown, TX Phone: (817) or customerservice@streetrodbracketry.com Prices are subject to change and do not include shipping, handling or applicable sales tax. Return authorization is required. All rights reserved.