Brushless 'Spec.' Motors (21.5 Turn) v6
|
|
|
- Milton Robertson
- 6 years ago
- Views:
Transcription
1 Motor Builder Type/ Range Brushless 'Spec.' Motors (21.5 Turn) v6 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA 2017 Rules: For Brushless 'Spec.' 21.5T Motors. Starting , only Motors included on this list, can be used at EFRA Sanctioned events (EC or GP), for: The Motor Class designated for the event. Illustration only Notes Whiist sample Motors submitted have been found to conform with EFRA 2017 rules for 'Spec' Brushless Motors, it is the responsibility of ALL competitors to ensure that the versions they use also comply with all EFRA rules and requirements. NOTE: These motors differ from Brushless 'Modified' Motors. Approval Date Motors below this level must comply with EFRA Rules :- App.3, 2.2 (9) which requires access to the stator to allow measurement and visual appraisal of the laminates. Also 2.2 (7), which requires the Rotor to be marked with Name or Logo &. PRT Electronic PRT AIR 10 A10215 Black Alu. Caps & Sleeve, PRT on End-Plate. Adjustable timing. Caps remove. Wind marked on sleeve. Has stator access. "S" version not approved. Rotor with name & 125RSHT. Option rotor: 123RSHT Justock 3650 G2 Pt # Black Alu. Can & End-Cap with Justock 3650G2. Nickel sintered rotor with one Alu. bal. ring. No timing adjustment. Stator and wind visible. Rotor stamped A. R1 Brushless Motor Lab. R1 R1-215B-125-V15 BRCA & EFRA End-Plate with R1 (only) etched. Stator sleeve with wind. Rotor with black balance ring. Adjustable timing 0-60 deg. Has stator access. Collector ring 3mm thick. Motors with epoxy filled windings not approved. Rotor with name & : R Option rotors: R , R FR-1 v2 FAN19475S Stator glued in sleeve. Sleeve with wind etched. Adjustable timing +20/+60 deg. Has stator access but hysol on ends. Wind etched on stator. Rotor with name, Part # - FAN Option Rotor: FAN Orion Vortex Ultimate Stock XLW (2016) # ORI28375 Small dia. Black sleeve with removable Alu. End-Plates, all retained with long screws. Adjustable timing 0/+40. Wind etched. Two sensor plug. Rotor has name & part # ORI Option Rotor: ORI Maclan MRR MCL1017 Black Can & End-Cap with copper timing plate & logo. Nickel rotor with one red Alu. bal. ring. Adjustable timing +20/+ 60 deg. Stator removes easily. Rotor MCL4075. Optional rotors # MCL4076 & MCL Tianco ORCA RT OMT215RT Black Can & E/Cap. Stator has access slots. Stator accepts 14.5mm gauge. ORCA RT & wind etched on End-Cap. Adjustable timing +/-50. Rotor with name & ORR425S0. Option rotors:- ORR S1, 233SL, 238SL, 253SL, 258SL Reds Racing VX MTTE 0013 Red metal End-Plate at Term. End, with adjustable timing Black Can/Sleeve. Stator separates & has wind etched. Rotor with Green drilled balance ring MSTE0016. Optional rotors:- # MSTE0009, MSTE
2 V10 G2 Pt # Black Alu. Can & End-Cap, moulded timing insert with logo moulded. Nickel sintered rotor with one Alu. bal. ring. Adjustable timing +20/+ 50 deg. Stator and wind visible. Rotor stamped A. Option Rotor: # stamped U-B Option End-Cap, timing +30/+60 # Team Powers Actinium TPBLM ACT- V2 Black Aluminium Sleeves & End- Plates. Stator with wind etched & visable. Nickel sintered rotor with no balance ring. Has stator access. (UK Spec. label not mandatory). Rotor with name, TP125G-R FR-1 Type M FAN19505S Stator glued & spigoted in sleeve. Sleeve with wind etched. Adjustable sensor plate timing +20/+60 deg. Has stator access. Wind etched on stator. Rotor with name, - FAN Optional Rotor: FAN Corally Dynospeed Spec. 3.0 C Sensored system, two ports. "Y" Wind. One end of stator visable but stator removes. Stator has wind etched. Wind etched on End- Cap. End-Cap Alum., adjustable timing, no numbers. Rotor with logo, Motiv M Code MOV10215S Alu. timing plate with MOTIV logo. Mounting Cap removes. Nickel sintered rotor with no balance ring. Adjustable sensor plate timing 0/+50 deg. Has stator access. Rotor part # MOV Tesla Tesla EP TS T-S Blue Alu. Can & End-Caps. Timing insert with Tesla logo etched. Nickel sintered rotor with one Alu. bal. ring. Adjustable timing +20/+ 60 deg. Lams.visible. Rotor TS Ruddog Ruddog RP540 RP-0015 Silver Alu. Can & End-Caps. Timing insert with Ruddog etched. Nickel rotor with one Alu. bal. ring. Adjustable timing +20/+ 60 deg. Lams.visible with wind visable on stator. Rotor RP DFV FM Black Alu. Can & End-Caps. Timing insert with DFV2 etched. Nickel sintered rotor with one Alu. bal. ring. Adjustable timing +20/+ 60 deg. Lams.visible. Rotor MF72-B Option rotor: MF Gen3 TT2703 Black Alum. Timing plate 2.5mm above red ring.. Adj. timing 0/60. Machined Alum. Can with wind printed. Stator visable via. slots. Rotor with one brass balance ring Option rotors: 2719, 2722 Gen3 TT2702 RPM Black Alum. Timing plate 2.5mm above red ring.. Adj. timing 0/60. Machined Alum. Can with wind printed. Stator visable via. slots. Rotor with one brass balance ring Option rotors: 2719, 2722 Turnigy Trackstar V2 Pt # Stator slides from sleeve.sleeve with wind etched. Adjustable sensor plate timing 0-50 deg. Has stator access. Wind etched on stator. Rotor with name, sizes &. Rotor EZpower EZ Kicker EZBR221 Gun-metal End-Plates & Sleeve. Adjustable red timing ring. Nickel sintered rotor with Red hollow balance ring marked EZ. Caps & sleeve remove, has stator access. Rotor EZBR
3 DFV-21.5 FM00215 Black Alu. Can & End-Caps. Timing insert with DFV etched. Nickel sintered rotor with one Alu. bal. ring. Adjustable timing +20/+ 60 deg. Lams.visible access with cap removed. Rotor MF Team Epic King Golden ReVtech 24K Pt # REV1803 End-Plate has Revtech etched. Stator sleeve with ReVtech & Wind etched. Adjustable sensor plate timing 0-60 deg. Has stator access. Wind stamped on lower collector ring & visible. Rotor with name & TEP1112. Optional rotor # TEP1118. Motors below this level must comply with EFRA Rule - App.3, 2.2(9), which requires access to the stator to allow measurement and visual appraisal of the laminates. V R #SP Black End-Plates & Sleeve with wind etched. Nickel sintered rotor with one Purple balance ring, 12.5 dia, 7.1 core. Adjustable timing 0-40 deg. Has stator access Tianco ORCA RX3 OMR215X3 Black Can & E/Cap. Complete stator removes. Has stator access slots. ORCA RX3 & wind etched on End-Cap. End-Cap Alum., adjustable timing. Rotor with black balance ring 12.4 dia., 7.2 core. OTR124ST Wurks Wurks R V7 End-Plate with R1 Wurks etched. Stator sleeve with Wind painted. Nickel sintered rotor painted Black, no balance ring, 12.4 dia, 7.2 core. Adjustable sensor plate timing 0-60 deg. Has stator access. Single collector ring at 'pinion' end of stator. Motors with Twin collector rings and/or epoxy filled windings not approved Reds Racing VX MTTE 0008 Red metal End-Plate at Term. End, with adjustable timing Black Can/Sleeve. Stator separates & has wind etched. Rotor with Black drilled balance ring MSTE0010. Optional rotors:- # MSTE0009, MSTE Team Epic ReVtech Killshot Pt # REV1603R Copper colour Aluminium End- Plates, Revtech etched. Blue stator sleeve with ReVtech & Wind painted. Nickel sintered rotor with one purple balance ring, 12.3 dia, 7.2 core. Adjustable sensor plate timing 0-80 deg. Has stator access. Optional rotor TEP 1112 approved V Black Alu. Can & End-Cap, moulded timing insert with logo printed. Nickel sintered rotor with one Alu. balance ring, 12.5 dia, 7.2 core. Adjustable sensor plate timing -20/+ 50 deg. Stator and wind visible via. sleeve slots Muchmore FLETA ZX Pt # MR-FZX215 Black metal End-Bell with plastic timing plate, with adjustable timing Black Can/Sleeve. Stator separates. Nickel sintered rotor with Green drilled balance ring. Rotor 7.2 core, 12.5 dia. Optional rotor MRFZR11 allowed. Aluminium timing-plate MR-FZAT fitted to later versions Team Wave Eclipse # TW Black Alum. End-Plates. Adj. timing. Black Alum. stator sleeve with wind etched. Nickel sintered rotor with one plain balance ring, 12.5 dia, 7.17 core, marked 125-R. Stator visable via. Sleeve slots Corally Corally Pro Silver 21.5T Plain Alum. End-Plates. Adj. timing. Plain Alum. stator sleeve with wind etched. Nickel sintered rotor with one Black balance ring, 12.3 dia, 7.18 core. Stator visable via. Sleeve slots
4 Tianco ORCA TX OTM 215TX Dull Grey Aluminium casings. Main sleeve removes. Has stator access slots. ORCA TX & wind etched. End-Plate moulded, adjustable timing. 12.5mm Rotor no balance ring, shaft marked 125S-N. Option 123S-N. 12.3mm. Option EndPlate OME111TX allowed. New sensor Ass. CAS-0220TX-30 fitted LRP X T Spec. # Black moulded End-Bell with XTEC. Fixed End-Sleeve etched with wind. Sintered rotor, coloured Black, with 1 balance ring. Grey stator moulding. Rotor shaft Black stamped Slot for stator access. Optional Green rotor # approved GEN2 21.5T # TT2402 & TT2403 Black Alum. End-Plates, not joined. Adj. timing. Alum. Can with wind etched. Stator visable via. Sleeve holes. Nickel sintered rotor with one brass balance ring. Rotor 7.14 core. 2402=12.25 dia. 2403=12.5 dia Team Orion VST2 Pro Stock # ORI Grey one-piece Can. Black Aluminium End-Plate retained with five screws, adjustable moulded timing plate. Wind etched. Nickel sintered rotor, 12.5 dia, 7.1 core, no balance rings. Optional 12.4 dia, 7.2 core Motors below this level retain approval, although they were approved before implementation of EFRA Rule App.3, 2.2(9), (requiring access to the stator for measurement and visual appraisal of laminates). Some motors do allow stator access Polished Auminium End-Plates, etched. Fixed timing. Blue stator sleeve with 21.5T & Pt.# etched. Sleeve & EndPlates also Gunmeteal colour. Side entry sensor plug. Nickel sintered rotor, 12.4 dia, 7.2 core Vampire Vampire Type AB+ Bloodline VR-3215 Black Plastic End-Plate at Term. End, with adjustable timing. Sensor plug horizontal. Green End plates. Wind etched. Nickel sintered rotor with no balance rings, 12.5 dia, 7.21 core GM Brushless version. Alum. Mounting-Plate with 3x5mm holes and 3 radiused slots. Plastic End-Cap with GM moulded. Adj. timing. Gun-Metal stator sleeve with Wind & Pt.# etched. Side entry sensor plug. Nickel rotor marked GM Stock, dia, 7.24 core Thunder Power Z3R-S TPM-540A215 Black Plastic Moulding at Term. End, with adjustable timing. Red Can/Sleeve with silver end cover. Wind etched on stator. Stator separates. Nickel sintered rotor with drilled red balance ring, dia, 7.2 core. Optional Rotors:- Blue or Green balance ring Competition 3.0 MMM Version Pt.# SP Dark Gun-Metal Aluminium Sleeve & End-Plates, SP etched. Sleeve with Wind & MMM etched. End-Plates with grooves. Red sensor board. Black sintered rotor with one balance ring, 12.3 dia, 7.2 core. Adjustable timing deg Viper Viper VST 8VST Red Aluminium End-Plates, VST & 21.5T etched. Black grooved stator sleeve. Black sintered rotor with no balance rings, 12.5 dia, 7.35 core. Adjustable timing T Spec. TT2250 (Etched Can) Red Aluminium mounting plate. Black moulded End-Bell with. Grooved Al. bonded stator sleeve with 21.5T etched. Nickle plated sintered rotor, 12.4 dia, 7.11 core. No balance rings
5 HPI Flux Pro Black Aluminium End-Plates, HPI etched. Black stator sleeve with Wind etched. Nickel sintered rotor, 12.5 dia, 7.2 core. Adjustable timing. Optional rotor dia, 7.2 core, Nickel plt. Optional rotor Mag & shaft Black GM Brushless Pt.# version. Gun-Metal Aluminium End-Plates, GM-Racing etched. 5 timing threads. Gun-Metal stator sleeve with S21.5T & Pt.# etched. Side entry sensor plug. Black sintered rotor, 12.4 dia, 7.21 core Trinity Trinity D3 TEP1057 Gun-Metal Aluminium End-Plates, Trinity etched. Black stator sleeve with D3 & 21.5T etched. Nickel sintered rotor with one balance ring, dia, 7.20 core. Adjustable sensor plate timing Brushless Dark Gun-Metal Aluminium End- Plates, GM-Racing etched. 5 timing threads. Dark Gun-Metal stator sleeve with S21.5T & Pt.# etched. Side entry sensor plug. Black sintered rotor, 12.3 dia, 7.2 core R Pt.# SP138215V3 Light Gun-Metal Aluminium End- Plates, SP & 21.5T etched. Light Gun-Metal stator sleeve with SP21.5T etched. Black sensor board. Black sintered rotor with one balance ring, 12.3 dia, 7.22 core. Adjustable timing Paul Worsley. (EFRA Elec. Chairman). Last update.
Brushless 'Spec.' Motors (21.5 Turn) v13
Motor Builder Type/ Range Brushless 'Spec.' Motors (21.5 Turn). 2017 v13 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (21.5 Turn) v7
Motor Builder Type/ Range Brushless 'Spec.' Motors (21.5 Turn). 2018 v7 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (13.5 Turn) v4
Motor Builder Type/ Range Brushless 'Spec.' Motors (13.5 Turn). 2017 v4 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (13.5 Turn) v2
Motor Builder Type/ Range Brushless 'Spec.' Motors (13.5 Turn). 2018 v2 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
05' - Brushless 'Spec.' Motors (13.5 Turn)
05' - Brushless 'Spec.' Motors (13.5 Turn) Note: These motors differ from Brushless 'Modified' motors. 2017 v13 Motors on this list have to comply with BRCA Electric Board 'Spec.' Brushless Rules, Sections
Brushless 'Spec.' Motors (10.5 Turn) v3
Brushless 'Spec.' Motors (10.5 Turn). 2016 v3 Motor Builder Type/ Range EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
05' - Brushless 'Spec.' Motors (13.5 Turn)
05' - Brushless 'Spec.' Motors (13.5 Turn) Note: These motors differ from Brushless 'Modified' motors. 2016 v7 Motors on this list have to comply with BRCA Electric Board 'Spec.' Brushless Rules, Section
Brushless 'Spec.' Motors (13.5 Turn) v4
Motor Builder Type/ Range Brushless 'Spec.' Motors (13.5 Turn). 2018 v4 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (10.5 Turn) v2
Motor Builder Type/ Range Brushless 'Spec.' Motors (10.5 Turn). 2018 v2 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
05' - Brushless 'Spec.' Motors (10.5 Turn)
05' - Brushless 'Spec.' Motors (10.5 Turn) Note: These motors differ from Brushless 'Modified' motors. 2015 v8 Motors on this list have to comply with BRCA Electric Board 'Spec.' Brushless Rules, Section
Brushless 'Spec.' Motors (13.5 Turn) v9
Brushless 'Spec.' Motors (13.5 Turn). 2015 v9 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Motors shown on this list are "Known to Comply" with EFRA 2015 Rules for Brushless 'Spec.' 13.5T Motors. s
Brushless 'Modified' Motors (All Winds) v7
Motor Builder Type/ Range Brushless 'Modified' Motors (All Winds). 2018 v7 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
17.5 Spec Motor List Scotty Ernst Productions September 22, 2017
Absima Revenge V2 Part # 2130021 AccuVance LUXON KG 17.5T AccuVance LUXON BS Dual 17.5T Amain.com Eco Power Slingshot ECP-8000 Corally Corally Pro Silver - 399175 Corally Dynospeed Spec 3.0, C-61102 Dualsky
17.5 Spec Motor List Scotty Ernst Productions June 12, 2018
Absima Revenge V2 Part # 2130021 AccuVance LUXON KG 17.5T AccuVance LUXON BS Dual 17.5T Amain.com Eco Power Slingshot ECP-8000 Arrowmax Dash R-Tune Part # DA740175 Corally Corally Pro Silver - 399175 Corally
Epic Nemesis 17.5T # TRI December 11, 2009
Manufacturer Name/Description 17.5 μh* Approval Date Dynamite DYNP1017 Quantex 17.5T 33.5 February 10, 2012 Eco Power Eco Power Slingshot ECP-8000 (w/12.5mmrotor) can use ECP-8010 (123mm option rotor)
The provisions of this rewritten Section 8.4 will become effective October 1, 2017 except where otherwise noted in the rules.
The provisions of this rewritten Section 8.4 will become effective October 1, 2017 except where otherwise noted in the rules. 8.4 ELECTRIC BRUSHLESS MOTOR RULES 8.4.1 General: 8.4.1.1 Sensor based motors
IFMAR ELECTRIC RACING BATTERIES and MOTORS
IFMAR ELECTRIC RACING BATTERIES and MOTORS 1/12 TH & 1/10 TH ISTC and 1/10 th OFF ROAD Version: 25 November 2017 (replaces September 2016) INDEX BATTERIES 2 1 APPRO VAL PROCEDURE BATT ERIES 2 2. BATTERIES
IFMAR ELECTRIC RACING BATTERIES and MOTORS
IFMAR ELECTRIC RACING BATTERIES and MOTORS 1/12 TH & 1/10 TH ISTC and 1/10 th OFF ROAD Version: 20 October 2016 V3 (replaces October 2015) INDEX BATTERIES 2 1 APPRO VAL PROCEDURE BATT ERIES 2 2. BATTERIES
AGENDA ELECTRIC SECTIONS GENERAL.
EFRA ANNUAL GENERAL MEETING HOTEL Holiday Inn, Brussels Belgium 3rd to 4th of November 2012 AGENDA ELECTRIC SECTIONS GENERAL. 1. CHAIRMAN S WELCOME Mr. Heiner Martin & Mr. Paul Worsley The Electric Track
4.0.5 Ceramic magnets only (cobalt and rare earth magnets specifically not allowed).
4.0 Motors Modified: Only brushed or brushless motors approved by IFMAR, ROAR EFRA & BRCA may be used. 4.0.1 Brushed Motors: General definition of a Brushed Motor: 4.0.2 Specifications; 05 sized displacement.
The South African Radio Drivers Association For On Road Electric Model Cars
The South African Radio Drivers Association For On Road Electric Model Cars Car Specifications for 1/10 th and 1/12 th Scale Electric Model Racing Cars 2018 Release This Document supersedes all previous
AGENDA ELECTRIC SECTIONS GENERAL.
EFRA ANNUAL GENERAL MEETING HOTEL Sercotel Sorolla Palace Valencia, Spain 1 st and 2 nd of November 2014 AGENDA ELECTRIC SECTIONS GENERAL. 1. CHAIRMAN S WELCOME Mr. Heiner Martin & Mr. Paul Worsley The
Stay up-to-date via RSS!
Page 1 of 6 Stay up-to-date via RSS! enter keywords and hit en Search ROAR Approved Non-Timing Manufacture Part Number Name/Description Software Version Affiliate Tech Details Calandra Racing Concepts
AGENDA ELECTRIC SECTIONS GENERAL.
EFRA ANNUAL SECTION MEETING HOTEL Hesperia Sant Just Barcelona, Spain 31 st October and 1 st of November 2015 AGENDA ELECTRIC SECTIONS GENERAL. 1. CHAIRMAN S WELCOME Mr. Heiner Martin & Mr. Paul Worsley
EFRA ANNUAL GENERAL MEETING HOTEL Holiday Inn, Brussels Belgium 5-6th of November AGENDA ELECTRIC SECTIONS GENERAL. Sat
EFRA ANNUAL GENERAL MEETING HOTEL Holiday Inn, Brussels Belgium 5-6th of November 2011 AGENDA ELECTRIC SECTIONS GENERAL. Sat. 5.11.11. 1. CHAIRMAN S WELCOME Mr. Heiner Martin & Mr. Paul Worsley The Electric
Regulations for the European Finals 2014
Regulations for the European Finals 2014 September 4th, 2014 September 7th, 2014 in Steyregg/Austria Older issues of these regulations lose their validity with this document! Table of Contents Preamble...
BRCA Approved Zero-Timing Blinky ESC s
The following list detils the speed controllers pproved for use in the stock clss during the BRCA 1/12 th Electric Circuit Ntionls nd the modes in which they must be run. This list is derived from the
UCL AIR OVERHP,3450RPM,1PH,60HZ,182TZ,36
Product Information Packet UCL570 5-7 AIR OVERHP,3450RPM,1PH,60HZ,182TZ,36 Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless otherwise
4.0.6 Approved motors may be modified by re-winding, balancing, truing of commutators, epoxy, ball bearings, brushes and custom brush systems only.
4.0 Motors Modified: Only brushed or brushless motors approved by IFMAR may be used. 4.0.1 Brushed Motors: General definition of a Brushed Motor: 4.0.2 Specifications; 05 sized displacement. Can diameter
contents about the range
contents Overview 3 Motor data PBL42 4 PBL60 5 PBL86 6 Technical information 7 Controller data S controller 9 N and B controllers 10 50B controller 12 EMC Directive compliance 13 Geared motors PBL42 motor
LSPXMV FCR Atmospheres containing explosive dust FCR asynchronous brake motors. General information
General information GENERAL USE : U.G. Enclosed three-phase brake asynchronous motors, LSPXMV series with failsafe brake, according to IEC 6003, 60072, EN 50281. Single speed : 0.25 to 11, frame size from
Basic Motor Theory. Introduction
Basic Motor Theory Introduction It has been said that if the Ancient Romans, with their advanced civilization and knowledge of the sciences, had been able to develop a steam motor, the course of history
MOTORSPORT TYRES 2019
MOTORSPORT TYRES RACING TYRES RADIAL A00F/A00Y A00N A00G/A00C for GT CARS ADVAN /SLICK A40 20 1 20/R20 330/R1 3/0R1 300/0R1 20/0R1 240/0R1 N3 N3 1 330/R1 N2 330/R1 20/R1 300/0R1 20/0R1 N2 N220 320/0R1
COMER SW80 TECHNICAL SPECIFICATIONS
VERSION 3 / 2013 UPDATED AUGUST 20 th, 2013 DOCUMENT UPDATE SCHEDULE It is certified that the updates listed below have been approved by the Australian Karting Association and have been incorporated into
All cars will use replica GT shells or club alternatives from the list of eligible shells given in Appendix 1
BRCA GT12 Circuit Rules 2011 2012 with DDRCC ammendments. Version 2.0-11 November 2012 This class is based on the principals of close, fair and low cost racing. This will make it both an ideal entry level
EUROPEAN FEDERATION OF RADIO OPERATED MODEL. Automobiles. Appendix 3 HANDBOOK
EUROPEAN FEDERATION OF RADIO OPERATED MODEL Automobiles Appendix 3 HANDBOOK 2010 EFRA Handbook 2010 APPENDIX 3 ELECTRIC CARS A GENERAL 1. RACETRACK SPECIFICATIONS for electric classes 1.1.1 For EFRA-sanctioned
Locking and Security Information
Information Profile cylinder Locking cylinders are catergorized according to a) Front view b) Side view Profile cylinder Double cylinder Single cylinder Thumbturn cylinder The definition of important components
Model Set A Figure A.1 1:144 Scale Cargo Launch Vehicle Overall Dimensions. 2.3 Dia Dia. 14.7
Model Set A Figure A.1 1:144 Scale Cargo Launch Vehicle Overall Dimensions 6 2.3 Dia. 1 Dia. 23.2 14.7 29.2 4 Faceted Shroud not curved Acrylic Fuselage SEP Rockets (4Ct) Detail Grooves (see below) 5 SSME
APPENDIX 3 ELECTRIC CARS
Appendix 3 APPENDIX 3 ELECTRIC CARS A GENERAL Appendix 3 1. RACETRACK SPECIFICATIONS for electric classes 1.1.1 For EFRA-sanctioned events, where non-permanent tracks are used, the track plans have to
Teepak Totally Enclosed Tube Ventilated High Voltage Induction Motors. A Regal Brand.
Teepak Totally Enclosed Tube Ventilated High Voltage Induction Motors A Regal Brand www.regalbeloit.com Specifications Range Poles Voltage : Upto 3000 KW : Upto 14 Pole : Upto 11000 Volt Frame : 450 1000
24h Verbano
Tecnical Rules Foreword I. This regulation is the comprehensive list of the conformity requirements of the Slot it car models entitled to race. Any modifications not listed are illegal. Some prohibitions
ECEg439:-Electrical Machine II
ECEg439:-Electrical Machine II 2.2 Main Structural Elements of DC Machine Construction of DC Machines A DC machine consists of two main parts 1. Stationary Part (Stator):-It is designed mainly for producing
334A or 334AB. Number of piston rings 1 Number of exhaust ports 2. Big end conr. Ball-bearing diam. 18X24X15 Combustion chamber shape Spherical
125cc LEOPARD FEATURES Cylinder volume 123.67 cc Bore 54 mm Max. theoretical bore 54.28mm Stroke 54mm Cooling system Water Inlet system Reed valve Number of carbs 1 Tillotson HL Carb. 334A or 334AB Cylinder/crankcase
JB1 for VAG EA888 Gen 3 engines Install Guide Last Updated: /201
JB1 for VAG EA888 Gen 3 engines Install Guide Last Updated: /201 Use subject to terms and conditions posted at http://www.burgertuning.com/terms.htm THIS PART IS LEGAL FOR USE ONLY IN COMPETITION RACING
WKA 2010 MANUFACTURER S CUP TAG SERIES REGULATIONS
WKA 2010 MANUFACTURER S CUP TAG SERIES REGULATIONS Contact information and updates can be found at www.ovka.com The following regulations are guidelines ONLY. Please refer to 2010 WKA Technical Manual
Kemppi Product catalogue
Kemppi Product catalogue 2015 67 MIG/MAG welding gun range Designed for comfortable and productive welding The best combination of weight and balance ensures welding craftsmen comfortably deliver their
Junior /GP
Patents Hardware system with patch suspension for elegant all-glass sliding doors (ESG/VSG) weighing up to 40, 80, 120 and 160 kg (88, 176, 264 and 352 lbs.). Inset profile system HAWA-Adapto 80-120 see
RAPID SOLUTIONS 2-3 TIMES LONGER LIFE PROCESS STAGE ELIMINATION REDUCED REWORK
RAPID SOLUTIONS for surface conditioning NOn-WOVEN NON-WOVEN DISCS WITH: 2-3 TIMES LONGER LIFE PROCESS STAGE ELIMINATION REDUCED REWORK RAPID CONDITIONING SOLUTIONS BETTER 2x 15%OVER PERFORMANCE OVER COMPETITORS
Variable speed asynchronous motors with FCR brake LSMV FCR. General information
General information GENERAL USE : U.G. Closed three-phase asynchronous brake motors, LSMV series with failsafe continuous (dc) brake, according to IEC 3, 72, EN 50281. Single speed : 0.25 to 11, frame
Standard Stock Range. The UK s largest independent multi-metals stockholder.
Standard Stock Range The UK s largest independent multi-metals stockholder www.aalco.co.uk Aalco is the UK s largest independent multi-metals stockholder, with an extensive inventory of aluminium, stainless
IDM4115T 50HP,1775RPM,3PH,60HZ,326T,1262M,TEBC,F1
Product Information Packet IDM4115T 50HP,1775RPM,3PH,60HZ,326T,1262M,TEBC,F1 Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless otherwise
PAC TRAINING PUMP MOTORS
PAC TRAINING PUMP MOTORS 1 Basics Magnet supported from above N S N S Since unlike poles repel each other, the magnet will rotate Stationary Magnet 2 Basics N S Stationary Magnet 3 Basics N N S S Stationary
November 2017 RECONDITIONING SERVICES We race condition any brand armature. Every armature is ultrasonically cleaned, diamond trued, and precision rebalanced. We take the lightest cut possible to true
Period: A - to Valid to FIA Class:
Page1 Red and/or black dot entries: HISTORIC TECHNICAL PASSPORT VALID IN: & & This Technical Passport is not a certificate of authenticity, nor does it in any way verify the history of the car or its constituent
PARTS LIST CHARGER 2717 DB
PARTS LIST CHARGER 2717 DB ITEM PART NO. PART DESCRIPTION QTY. 101 6498051 AXLE / PIVOT MOUNT 2 102 9122260 3/8-16 X 1 HEX BOLT - PACK OF 2 4 103 9122100 3/8 SPLIT LOCK WASHER - PACK OF 10 4 104 9122 180
Pretest Module 21 Unit 4 Single-Phase Motors
Pretest Module 21 Unit 4 Single-Phase Motors 1. What are the four main components of a single-phase motor? Rotor, stator, centrifugal switch, end bells and bearings 2. How is a rotating field created in
CPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm
95 Nm to 2900 Nm Introduction The range of IP23 protection CPLS asynchronous motors was designed for fixed and variable speed applications when there is little space available or (and) there is a wide
BRUSHLESS EXCITERS FOR TURBINE GENERATORS
BRUSHLESS EXCITERS FOR TURBINE GENERATORS Economical, Manpower Saving Exciters Based on State-of-the-Art Technology. Mitsubishi Electrical manufactures brushless exciters for all types of turbine generator,
ABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
11mm 13mm 15mm 21mm 29mm For shaft sizes 2mm, 3mm, 4mm. For shaft sizes 3mm, 4mm, 6mm, 1/8 in and 1 /4 in. Also 3 /16 in on types: S, SP, SB, SD & SW
4 Collet knobs the complete range 10 For shaft sizes 2,, 11 1 For shaft sizes 2,, For shaft sizes 2,, For shaft sizes,,, and 1 /4 in. Also 3 /16 in on types: S, SP, SB, SD & SW For shaft sizes,,, and 1
Double action door rails
The solution for heavy doors. Convincing in quality and design. CONTENTS Technical details 26-29 Materials and surface finishes 290 Product information 105 mm door rails: 55/65 mm pivot point 291-292 22/24
FWD Drag Series Class Rules
FWD Drag Series Class Rules Updated 2019 FWD DRAG SERIES Designations FWD preceded by car number. Designed for full-bodied front wheel drive cars. The class is run on a.4 second Pro tree. Minimum weights
Eastbourne Electric Car Club Tamiya M-Chassis Rules
Eastbourne Electric Car Club Tamiya M-Chassis Rules 1. Chassis 1.1. The only permitted chassis allowed in the Tamiya M-Chassis class are, M-03, M-05, M-06 and M-07 (including R, S Spec and Pro versions).
Product Information Packet IDM2334T 20HP,1770RPM,3PH,60HZ,256TC,0960M,TEBC,F
Product Information Packet IDM2334T 20HP,1770RPM,3PH,60HZ,256TC,0960M,TEBC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
Data Sheet No 241 Jan 2002 Issue G. Electrode Holders & Brackets for Conductivity Type Systems
HAWKER Data Sheet No 4 Jan Issue G LEVEL CONTROL SYSTEMS Holders & Brackets for Conductivity Type Systems Heavy Duty HPE8 Heavy Duty HPE8/P Heavy Duty E holder suitable for sewage, water and effluent applications.
SOLENOID CONTROL VALVE
PROJECT NAME LOCATION SOLENOID CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 4 in. (100 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
Open continuous current (DC) motors MS 1 - MS 2. General information
MS 1 - MS 2 General information Open continuous current (dc) motors conforming to the IEC specifications. MS 1 : - frame size 80 to 132 mm, - power 0.44 to 8.85 kw. MS 2 : - frame size 112 and 132 mm,
Stock Spec ESC List neutral and when set to the no-timing profile #1 Calandra Racing Diamond Castle Creations Mamba Max Pro V1.
Calandra Racing CRC4000 Advanced Electronics 2.1 software or Has a blinking blue light when the throttle is in Concepts Black Diamond LV higher neutral and when set to the no-timing profile #1 Calandra
Suzuki bikes. Brake Line kits.
Suzuki 125 FU 1993 1 Standard 1 Suzuki 250 ET - ET 1980 1 Standard Suzuki Address 125 2008 1 Standard Suzuki AN400 Burgman 2004 2008 3 Standard 1 Suzuki AP50 1996 2002 1 Standard Suzuki B-King 2008 2 Over
CONTENTS 1 GENERAL 2 STANDARDS. 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances
CONTENTS 1 GENERAL 2 STANDARDS 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances 4 MOTOR DESIGN 4.1 Stator Casing 4.2 Stator Core with Winding 4.3 Stator Winding and Insulation
Medium Duty Industrial Cable Reels
SIMBAL earthing reels are the ideal solution for a wide range of standard applications. These drums come as an integral unit with pre-fitted green / yellow earth cable and a swiveling wall mounting bracket.
SY Type Control Cable 0.5mm 2 to 120mm 2 PVC Sheath
Applications Control cables in tool machinery, plant installation, power stations and data equipment. The braided screen of the galvanized steel wires offers the best possible protection against mechanical
Graupner GmbH & Co. GM-Genius 150, GM-Genius 75, GM-Genius 90 approved all as picture below.
Advanced Electronics Calandra Racing Concepts CRC4000 Black Diamond LV 2.1 Has a blinking blue light when the throttle is in neutral and when set to the no-timing profile #1 Calandra Racing Concepts CRC4002
CLEVIS HANGER 401. Standard Duty B A
CLEVIS HNGER 40 Standard Duty Size Range: /2 through 24 Surface Finish: Electro-zinc plated non-insulated pipe lines Standard electro-zinc plated finish is cleaner, provides superior corrosion protection
OFF ROAD COMPETITION
OFF ROAD COMPETITION GYTR Performance Products are especially developed for closed circuit use only and they are not street legal. GYTR Performance Products Range Off Road Competition 1 YZ85 GYT-5PA35-10-AL
MIG/MAG welding gun range
MIG/MAG welding gun range Designed for comfortable and productive welding The best combination of weight and balance ensures welding craftsmen comfortably deliver their skill weld after weld. Choose from
22378 / / DRIP STANDS. Device cart. IV Stand for general medicine
Tube diameter 33mm 22410 64 64 100 10 0.28 22410 310 22410 Device cart Tube diameter 33mm Fixed height 1000mm Upper ABS shelf with extended up rims on four sides 390x320mm Pushing handle Basket 300 x 200
MOTORSPORT TYRES 2018
MOTORSPORT TYRES 201 RACING TYRES RADIAL A00F/A00Y A00N A00G/A00C for GT CARS ADVAN /SLICK A40 20 20/R20 1 330/R1 3/0R1 20/0R1 240/0R1 1 330/R1 N2 330/R1 20/R1 300/0R1 N2 20/0R1 N220 320/0R1 300/0R1 N244
Stock Spec ESC List neutral and when set to the no-timing profile #1 Calandra Racing Diamond Castle Creations Mamba Max Pro V1.
Calandra Racing CRC4000 Advanced Electronics 2.1 software or Has a blinking blue light when the throttle is in Concepts Black Diamond LV higher neutral and when set to the no-timing profile #1 Calandra
Threaded fittings. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
Motorized Pulley 630M & 630H, Ø in. (630 mm)
Our 24.80 diameter Motorized Pulley range fers two different performance levels for BULK applications: - M for Medium duty - H for Heavy duty It is important to note the product differences and choose
PARTS LIST CHARGER 2022 DB
PARTS LIST CHARGER 2022 DB SAVE THESE INSTRUCTIONS CHASSIS AND DRIVE ASSEMBLY 101 2694069 #40 ROLLER CHAIN 57 LINKS WITH MASTER 1 2694081 #40 ROLLER CHAIN 57 LINKS NO MASTER 1 2795211 LINK MASTER #40 CHAIN
MAXFIT Q-FIT SDN BHD
MAXFIT Metal Contribute the style and efficiency to your office storage system Designed for today's office system, s, RTA, and home office furniture. Tool-free front attachment. Pratical and hassle-free
Corsair Motors THE NEW STANDARD
Corsair Motors THE NEW STANDARD Corsair Motors SURPASSING INDUSTRY STANDARDS IN CONSTRUCTION AND PERFORMANCE Summit ESP A Halliburton Service offers the new standard in electric submersible motors. Corsair
HAWA-JUNIOR 80 XINNIX POCKET SLIDING DOOR SYSTEM
SLIDING DOOR FITTINGS DIRECTORY / APRIL 2014 POCKET SLIDING INTERIOR DOOR SYSTEMS HAWA-JUNIOR 80 XINNIX POCKET SLIDING DOOR SYSTEM High quality straight sliding door gear for residential or commercial
Features and Benefits
Features and Benefits ELECTRICAL DESIN z 1 500 HP; 2, 4, 6 pole z 3600, 1800, 1200 RPM z 3 Phase, 60 Hz, 460V z Motors can be rerated for 380, 400 and 415 VAC at 50 Hz. z Designed to meet NEMA M1, M13,
Glass Reinforced Polyester Enclosures
42 The GRP range comprises 16 sizes of enclosure manufactured in glass reinforced polyester (GRP). This material is highly resistant to contamination from oils, fats, aliphatic and aromatic carbohydrates,
Valves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
Profiles and tyres. The Wheels. Wheels 07 Wheels 08 Wheels 09 Wheels 13 Wheels 14 Wheels 17 Wheels 18 Wheels 21. Types
The Wheels. Wheel 00 Wheels 0R Wheesl 0S Wheels 01 Wheels 03 Wheels 04 Wheels 06 Wheels 07 Wheels 08 Wheels 09 Wheels 13 Wheels 14 Wheels 17 Wheels 18 Wheels 21 Wheels 27 Wheels 29 Wheels 30 Wheels 32
PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE
PROJECT NAME LOCATION PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2-1/2 in. (65 mm) through 18 in. (450 mm) Control
EXPEDITION TOP BOX BLACK A EXPEDITION TOP BOX BACKREST PADS A EXPEDITION TOP BOX SILVER A
BLACK A9500606 BACKREST PADS A9500532 SILVER A9500530 BLACK A9500606 CARRY HANDLE A9500666 EXPEDITION PANNIER MOUNTING RAILS A9500726 EXPEDITION PANNIERS BLACK A9500601 SLIDING CARRIAGE A2353434 TOP BOX
COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES 2.01 COMBINATION RESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVE
PROJECT NAME LOCATION COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900
EM7047T-I 7.5//5HP,1770//1475RPM,3PH,60//50HZ,213T
Product Information Packet EM7047T-I 7.5//5HP,1770//1475RPM,3PH,60//50HZ,213T Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless otherwise
LSES high efficiency three-phase asynchronous motors. General information
Efficiency class IE2 General information Totally enclosed three-phase saving asynchronous motors, series, according to IEC 60034, 60038, 60072 ; 0.75 to 200 kw, frame size 80 to 315 mm. Single speed: 2,4
56-SDMS-07 REV. 01 SPECIFICATIONS FOR
56-SDMS-07 REV. 01 SPECIFICATIONS FOR UNIT SUBSTATIONS UP TO 36 kv ALUMINUM TRANSFORMER ALUMINUM BUS BARS LVDP This specification is property of SEC and subject to change or modification without any notice
TO Approved for public release, distribution unlimited
UNCLASSIFIED AD NUMBER AD846359 NEW LIMITATION CHANGE TO Approved for public release, distribution unlimited FROM Distribution authorized to U.S. Gov't. agencies and their contractors; Administrative/Operational
W Series Cylindrical Lever. W Series cylindrical lever lock
38 W Series cylindrical lever lock Arrow W Series Grade 1 heavy duty levers offer an economically pleasing solution for ADA compliance. They re offered in a complete range of functions and finishes and
Installation instructions
Installation instructions Akrapovič Exhaust System Slip-On for the Yamaha FJR 1300 *505162* EN Revision 1.0 02/2016 www.akrapovic.com www.akrapovic.com Congratulations on purchasing the Akrapovič exhaust
Shut-off dampers. Type AK-Ex. For low-leakage shut-off of volume flows in potentially. explosive atmospheres (ATEX) PD AK-Ex 1.
X X testregistrierung Shut-off dampers Type ATEX-compliant parts and units For low-leakage shut-off of volume flows in potentially explosive atmospheres (ATEX) Circular shut-off dampers for shutting off
PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
PARTS LIST FOR NO. SERIES AM ANGLE TOOLS Form ZA Date 0March/F Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM).