Brushless 'Spec.' Motors (13.5 Turn) v4
|
|
|
- Lillian Scott
- 6 years ago
- Views:
Transcription
1 Motor Builder Type/ Range Brushless 'Spec.' Motors (13.5 Turn) v4 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA 2017 Rules: For Brushless 'Spec.' 13.5T Motors. Starting , only Motors included on this list, can be used at EFRA Sanctioned events (EC or GP), for: The Motor Class designated for the event. Illustration only Notes Whiist sample Motors submitted have been found to conform with EFRA 2017 rules for 'Spec' Brushless Motors, it is the responsibility of ALL competitors to ensure that the versions they use also comply with all EFRA rules and requirements. NOTE: These motors differ from Brushless 'Modified' Motors. Approval Date Motors below this level must comply with EFRA Rules :- App.3, 2.2 (9) which requires access to the stator to allow measurement and visual appraisal of the laminates. Also 2.2 (7), which requires the Rotor to be marked with Name or Logo &. R1 Brushless Motor Lab. R1 R1-135B-125-V15 BRCA & EFRA End-Plate with R1 (only) etched. Stator sleeve with wind. Rotor with black balance ring. Adjustable timing 0-60 deg. Has stator access. Collector ring 3mm thick. Motors with epoxy filled windings not approved. Rotor with name in : R Option rotor: R FR-1 v2r FAN19471S Stator glued in sleeve. Sleeve with wind etched. Adjustable timing +20/+60 deg. Has stator access but hysol on ends. Wind etched on stator. Rotor with name, Part # - FAN Option Rotor: FAN FR-1 v2t FAN19472S Stator glued in sleeve. Sleeve with wind etched. Adjustable timing +20/+60 deg. Has stator access but hysol on ends. Wind etched on stator. Rotor with name, Part # - FAN Option Rotor: FAN Orion Vortex Ultimate Stock LW (2016) # ORI28369 Full dia. Black sleeve with removable Alu. End-Plates, all retained with long screws. Adjustable timing 0/+40. Wind etched. Two sensor plug. Rotor has name & part # ORI Option Rotor: ORI Maclan MRR MCL1015 Black Can & End-Cap with copper timing plate & logo. Nickel rotor with one red Alu. bal. ring. Adjustable timing +20/+ 60 deg. Stator removes easily. Rotor MCL4075. Optional rotors # MCL4076 & MCL Tianco ORCA RT OMT135RT Black Can & E/Cap. Stator has access slots. Stator accepts 14.5mm gauge. ORCA RT & wind etched on End-Cap. Adjustable timing +/-50. Rotor with name & ORR425S0. Option rotors:- ORR S1, 233SL, 238SL, 253SL, 258SL Reds Racing VX MTTE 0012 Red metal End-Plate at Term. End, with adjustable timing Black Can/Sleeve. Stator separates & has wind etched. Rotor with Green drilled balance ring MSTE0016. Optional rotors:- # MSTE0009, MSTE Trinity Monster Horsepower TEP 1501 "M" Green end-plate has Trinity etched. Stator sleeve with Trinity, M & Wind etched. Adjustable sensor plate timing 0-60 deg. Has stator access. Wind stamped on lower collector ring. Rotor with name & TEP1118. Option Rotor # TEP
2 Orion Vortex VST2 Pro. Mg. LW (2016) # ORI28330 Sensored system. Dark grey one-piece Can. End-Plate has Orion & wind marked, retained with five screws. Adjustable timing +/- 10. Two sensor plugs. Has stator access. Rotor with name & ORI Option rotor: ORI Actinium TPBLM ACT- V2 Black Aluminium Sleeves & End- Plates. Stator with wind etched & visable. Nickel sintered rotor with no balance ring. Has stator access. (UK Spec. label not mandatory). Rotor with name, TP125G-R Corally Dynospeed Spec. 3.0 C Sensored system, two ports. "Y" Wind. One end of stator visable but stator removes. Wind etched on End-Cap. End-Cap Alum., adjustable timing, no numbers. Rotor with logo, Tesla Tesla EP TS T-S Blue Alu. Can & End-Caps. Timing insert with Tesla logo etched. Nickel sintered rotor with one Alu. bal. ring. Adjustable timing +20/+ 60 deg. Lams.visible. Rotor TS Motiv M Code MOV10305S Alu. timing plate with MOTIV logo. Mounting Cap removes. Nickel sintered rotor with no balance ring. Adjustable sensor plate timing 0/+50 deg. Has stator access. Rotor part # MOV1315 FR-1 Type M FAN19480S FR-1 Type RS FAN19481S Stator glued & spigoted in sleeve. Sleeve with wind etched. Adjustable sensor plate timing +20/+60 deg. Has stator access. Wind etched on stator. Rotor with name, - FAN Optional Rotor: FAN Stator glued & spigoted in sleeve. Sleeve with wind etched. Adjustable sensor plate timing +20/+60 deg. Has stator access. Wind etched on stator. Rotor with name, - FAN Optional Rotor: FAN Ruddog Ruddog RP540 RP-0013 Silver Alu. Can & End-Caps. Timing insert with Ruddog etched. Nickel rotor with one Alu. bal. ring. Adjustable timing +20/+ 60 deg. Lams.visible with wind visable on stator. Rotor RP DFV FM Black Alu. Can & End-Caps. Timing insert with DFV2 etched. Nickel sintered rotor with one Alu. bal. ring. Adjustable timing +20/+ 60 deg. Lams.visible. Rotor MF72-B Option rotor: MF Gen3 TT2707 Black Alum. Timing plate 2.5mm above red ring.. Adj. timing 0/60. Machined Alum. Can with wind printed. Stator visable via. slots. Rotor with one brass balance ring Option rotors: 2719, Gen3 TT2706 RPM Black Alum. Timing plate 2.5mm above red ring.. Adj. timing 0/60. Machined Alum. Can with wind printed. Stator visable via. slots. Rotor with one brass balance ring Option rotors: 2719, DFV-13.5 FM00135 Black Alu. Can & End-Caps. Timing insert with DFV etched. Nickel sintered rotor with one Alu. bal. ring. Adjustable timing +20/+ 60 deg. Lams.visible access with cap removed. Rotor MF
3 Hobbywing Xerun V10 G2 Pt # Black Alu. Can & End-Cap, moulded timing insert with logo moulded. Nickel sintered rotor with one Alu. bal. ring. Adjustable timing +20/+ 50 deg. Stator and wind visible. Rotor stamped A. Option Rotor: # stamped U-B Option End-Cap, timing +30/+60, Turnigy Trackstar V2 Pt # Stator slides from sleeve.sleeve with wind etched. Adjustable sensor plate timing 0-50 deg. Has stator access. Wind etched on stator. Rotor with name, sizes &. Rotor Epic King Golden 24K Pt # REV1801 Sonic M3 255 Sonic M3 - SS 1S 270 Super Extreme Pt # G0150 End-Plate has Revtech etched. Stator sleeve with & Wind etched. Adjustable sensor plate timing 0-60 deg. Has stator access. Wind stamped on lower collector ring & visible. Rotor with name & TEP1112. Optional rotor # TEP1118. Black Alu. Cap & Sleeve, Alu. timing insert with 'R' logo. Adjustable sensor plate timing 0/+ 50 deg. Caps remove and stator can be removed, wind etched on stator. Nickel sintered rotor with one Alu. balance ring. Rotor 273. Optional Rotor # 272. Black Alu. Cap & Sleeve, Alu. timing insert with 'R' logo. Adjustable sensor plate timing 0/+ 50 deg. Caps remove and stator can be removed, wind etched on stator. Nickel sintered rotor with one Alu. balance ring. Rotor 272. Optional Rotor # 273. Red Alu. Cap & Sleeve, Alu. timing insert with G logo. Adjustable sensor plate timing 0/+ 60 deg. Caps & sleeve remove, wind etched on stator. Nickel sintered rotor with one Alu. balance ring. Rotor GF Option rotor G0045. Motors below this level must comply with EFRA Rule - App.3, 2.2(9), which requires access to the stator to allow measurement and visual appraisal of the laminates. Speed Passion V R #SP Black End-Plates & Sleeve with wind etched. Nickel sintered rotor with one Purple balance ring, 12.5 dia, 7.1 core. Adjustable timing 0-40 deg. Has stator access PRT Electronic PRT AIR 10 A10135 Black Alu. Caps & Sleeve, PRT on End-Plate. Nickel finish Rotor with Cyan Alu. balance ring, 12.5 dia, 7.2 core. Adjustable timing. Caps remove. Wind marked on sleeve. Has stator access. Rotor options:- PRT123RSHT Purple/Nickel. PRT125RS2 Grey/Nickel. PRT125RS Grey/Black. PRT123RS Purple/Black. Logo design updated Hirosaka Hirosaka HSK- PRO135T Black metal End-Bell with plastic timing insert. Adjustable timing Black Can/Sleeve. Nickel sintered rotor with Purple balance ring, 12.3 dia, 7.1 core. Caps & sleeve remove, has stator access. Stator marked with wind EZpower EZ Kicker EZBR213R Gun-metal End-Plates & Sleeve. Adjustable red timing ring. Nickel sintered rotor with Red hollow balance ring marked EZ, 12.5 dia, 7.2 core. Caps & sleeve remove, has stator access Wurks Wurks R V7 End-Plate with R1 Wurks etched. Stator sleeve with Wind painted. Nickel sintered rotor painted Black, no balance ring, 12.5 dia, 7.2 core. Adjustable sensor plate timing 0-60 deg. Has stator access. Single collector ring at 'pinion' end of stator. Motors with Twin collector rings and/or epoxy filled windings not approved
4 Tianco ORCA RX3 OMR135X3 Black Can & E/Cap. Complete stator removes. Has stator access slots. ORCA RX3 & wind etched on End-Cap. End-Cap Alum., adjustable timing. Rotor with black balance ring 12.4 dia., 7.2 core. Rotor OTR124ST Actinium TPBLM ACT Black Aluminium End-Plates, etched. Gun-Metal stator sleeve with 13.5T etched. Nickel sintered rotor with no balance ring, dia, 7.23 core. Has stator access. Optional End-Plate TP-ATEB-001 allowed. Optional Rotor # TP125G-R Trinity D4 TEP 1701 Purple Alu. timing plate with TRINITY & 4 etched. Caps and sleeve dark gun-metal, all parts remove. Nickel sintered rotor with one purple balance ring, 12.3 dia, 7.2 core. Adjustable sensor plate timing deg. Has stator access. Optional rotor TEP 1112 approved Absima Revenge V Black Alu. Caps & Grey Sleeve, Logo only on End-Plate. Sintered rotor with one Alu. balance ring, 12.5 dia, 7.2 core. Sensor plate timing 0/+ 40 deg. Caps & sleeve remove, wind marked on stator. Only V2 version approved Reds Racing VX MTTE 0006 Red metal End-Plate at Term. End, with adjustable timing Black Can/Sleeve. Stator separates & has wind etched. Rotor with Black drilled balance ring MSTE0010. Optional rotors:- # MSTE0009, MSTE Super Sonic Pt # G0008 Black Alu. Caps & Sleeve, Alu. timing insert with logo printed. Nickel sintered rotor with one Alu. balance ring, 12.5 dia, 7.2 core. Adjustable sensor plate timing 0/+ 40 deg. Caps & sleeve remove, wind etched on stator. Option rotor G Hobbywing Xerun V Black Alu. Can & End-Cap, moulded timing insert with logo printed. Nickel sintered rotor with one Alu. balance ring, 12.5 dia, 7.2 core. Adjustable sensor plate timing -20/+ 50 deg. Stator and wind visible via. sleeve slots Epic Killshot Pt # REV1601T Copper colour Aluminium End- Plates, Revtech etched. Blue stator sleeve with & Wind painted. Nickel sintered rotor with one purple balance ring, 12.3 dia, 7.2 core. Adjustable sensor plate timing 0-80 deg. Has stator access. Optional rotor TEP 1112 approved Epic Killshot Pt # REV1601R Copper colour Aluminium End- Plates, Revtech etched. Blue stator sleeve with & Wind painted. Nickel sintered rotor with one purple balance ring, 12.3 dia, 7.2 core. Adjustable sensor plate timing 0-80 deg. Has stator access. Optional rotor TEP 1112 approved Novak Vulcan 3643 Black Al. End-Plate with NOVAK etched. Stator sleeve with 13.5T label. 3/16 Bearing at Pinion end. Red plastic denoting Adjustable timing. Nickel sint. Rotor Pt.# , 7.1 core. Optional rotor Pt.# dia Mtroniks MX-1 MTMX135 Anodised Alum. End-Plates & Stator Sleeve, with wind printed. Fixed timing. Nickel sintered rotor with one hollow balance ring, 12.5 dia, 7.2 core. Stator visable via. Sleeve slots Muchmore FLETA ZX Pt # MR-FZX135 Black metal End-Bell with plastic timing plate, with adjustable timing Black Can/Sleeve. Stator separates. Nickel sintered rotor with Blue drilled balance ring. Rotor 7.2 core, 12.3 dia. Optional rotor MRFZR12 allowed. Aluminium timing-plate MR-FZAT fitted to later versions
5 Nosram Pure 2 Evolution Spec. Racing Pt.# Black moulded End-Bell with XTEC. Fixed End-Sleeve etched with wind. Sintered rotor, coloured Black, with 1 balance ring. Grey stator moulding. Rotor shaft Black stamped Slot for stator access. Optional Green rotor # approved Corally Corally Pro Silver 13.5T Plain Alum. End-Plates. Adj. timing. Plain Alum. stator sleeve with wind etched. Nickel sintered rotor with one Black balance ring, 12.4 dia, 7.18 core. Stator visable via. Sleeve slots. All red S/Print decal also OK Tianco ORCA TX OTM 135TX Dull Grey Aluminium casings. Main sleeve removes. Has stator access slots. ORCA TX & wind etched. End-Plate moulded, adjustable timing. 12.5mm Rotor no balance ring, shaft marked 125S-N. Option rotor 123S-N. 12.3mm. Option EndPlate OME111TX allowed. New sensor Ass. CAS-0220TX-30 fitted LRP X T Spec. # Black moulded End-Bell with XTEC. Fixed End-Sleeve etched with wind. Sintered rotor, coloured Black, with 1 balance ring. Grey stator moulding. Rotor shaft Black stamped Slot for stator access. Optional Green rotor # approved GEN2 # TT2406 & TT2407 Black Alum. End-Plates, not joined. Adj. timing. Alum. Can with wind etched. Stator visable via. Sleeve holes. Nickel sintered rotor with one brass balance ring. Rotor 7.14 core. 2406=12.25 dia. 2407=12.5 dia Wave Eclipse # TW Black Alum. End-Plates. Adj. timing. Black Alum. stator sleeve with wind etched. Nickel sintered rotor with one plain balance ring, 12.5 dia, 7.17 core, marked 125-R. Stator visable via. Sleeve slots Sonic Mach 2 # 233 Black metal End-Bell at Term. End, with adjustable timing Black Can/Sleeve. Stator separates. Nickel sintered rotor with drilled balance ring, 12.5 dia, 7.2 core # 956. Optional rotors:- # 954, # Savox Savox SX.1 # SAV- BLH Aluminium casings. Slot for stator access included. Main sleeve removes, stator spigoted into fixed casing. Saxox X1 & wind etched. End-Plate moulded, adjustable timing. Rotor has no balance ring Orion VST2 Pro Stock # ORI Grey one-piece Can. Black Aluminium End-Plate retained with five screws, adjustable moulded timing plate. Wind etched. Nickel sintered rotor, 12.5 dia, 7.1 core, no balance rings. Optional 12.4 dia, 7.2 core Motors below this level retain approval, although they were approved before implementation of EFRA Rule App.3, 2.2(9), (requiring access to the stator for measurement and visual appraisal of laminates). Some motors do allow stator access. Horizon Hobby Dynamite Platinium 13.5T # DYP 1013 Black Alluminium End-Plate at Term. End, with adjustable timing. Wind etched on Term. Sleeve, Stator mould & Stator Lams. Stator separates. Nickel sintered rotor with drilled balance ring, 12.5 dia, 7.2 core Dualsky Track & Field Z5 13.5T Pt # Silver Sleeve & Mounting-Plate. Z5, 13.5T, Track&Field etched on sleeve. Black Alu. End-Plate & retaining ring. Adjustable timing. Nickel sintered rotor with no balance ring, 12.5 dia, 7.2 core
6 Epic R-Power Pt # REV1051 Copper colour Aluminium End- Plates, painted. Blue stator sleeve with & Wind painted. Nickel sintered rotor with one purple balance ring, dia, 7.2 core. Adjustable sensor plate timing. Mounting Plate with 3 x 5.9mm slots Vampire Vampire Type AB+ Bloodline VR-3135 Black Plastic End-Plate at Term. End, with adjustable timing. Sensor plug horizontal. Purple End plates. Wind etched. Nickel sintered rotor with no balance rings, 12.5 dia, 7.21 core Graupner GM Brushless version. Alum. Mounting-Plate with 3x5mm holes and 3 radiused slots. Plastic End-Cap with GM moulded. Adj. timing. Gun-Metal stator sleeve with Wind & Pt.# etched. Side entry sensor plug. Nickel rotor marked GM Stock, dia, 7.24 core T Spec. TT2252 (Etched Can) Red Aluminium mounting plate. Black moulded End-Bell with. Grooved Al. bonded stator sleeve with 13.5T etched. Nickle plated sintered rotor, 12.5 dia, 7.1 core. No balance rings Thunder Power Z3R-S TPM-540A135 Black Plastic Moulding at Term. End, with adjustable timing. Red Can/Sleeve with silver end cover. Wind etched on stator. Stator separates. Nickel sintered rotor with drilled red balance ring, dia, 7.2 core. Optional rotors: - Blue or Green balance ring Sonic 942 Black Plastic End-Plate at Term. End, with adjustable timing. Black Can/Sleeve. Wind etched. Stator separates. Nickel sintered rotor with drilled balance ring, 12.5 dia, 7.2 core. Later version has more timing graduations detailed & relocated pointer Speed Passion Competition 3.0 MMM Version Pt.# SP Dark Gun-Metal Aluminium Sleeve & End-Plates, SP etched. Sleeve with Wind & MMM etched. End-Plates with grooves. Red sensor board. Black sintered rotor with one balance ring, 12.3 dia, 7.2 core. Adjustable timing deg Viper Viper VST 8VST Red Aluminium End-Plates, VST & 13.5T etched. Black grooved stator sleeve. Black sintered rotor with no balance rings, 12.5 dia, 7.35 core. Adjustable timing Novak Ballistic 3613 Black Al. End-Plate with NOVAK etched. Stator sleeve with 13.5T label. Ring etched. Nickel plated sintered rotor, 12.3 dia, 7.12 core. Red plastic denoting Adjustable timing. Vented End-Bells # 5925 approved Plutonium Pt.# TP-BLM PL Black Aluminium End-Plates, etched. Gun-Metal stator sleeve with 13.5T etched. Nickel sintered rotor with no balance ring, dia, 7.24 core. Adjustable sensor plate timing. Optional End-Plate TP-ATEB-001 allowed HPI Flux Pro Black Aluminium End-Plates, HPI etched. Black stator sleeve with Wind etched. Nickel sintered rotor, 12.5 dia, 7.2 core. Adjustable timing. Optional rotor dia, 7.2 core, Nickel plt. Optional rotor Mag. & Shaft Black Hobbywing Xerun Polished Auminium End-Plates, Hobbywing etched. Fixed timing. Blue stator sleeve with 13.5T & Pt.# etched. Sleeve & EndPlates also Gunmeteal colour. Side entry sensor plug. Nickel sintered rotor, 12.4 dia, 7.2 core. Rotor with one balancing ring
7 Graupner GM Brushless Pt.# version. Gun-Metal Aluminium End-Plates, GM-Racing etched. 5 timing threads. Gun-Metal stator sleeve with S13.5T & Pt.# etched. Side entry sensor plug. Black sintered rotor, 12.4 dia, 7.21 core. Rotor with one balancing ring Tianco ORCA RX2 OBM135X2 Gun-Metal End-Plates, RX2 & 13.5T etched. Gun-Metal sleeve with RX2 & 13.5T etched. Black rotor, one balance ring, 12.2 dia, 7.23 core. Optional rotor OMA123PX 12.2mm nickel. Adjustable sensor plate timing. Mounting Plate 3 x 6mm holes & chamfer Trinity Trinity D3 TEP1051 Gun-Metal Aluminium End-Plates, Trinity etched. Black stator sleeve with D3 & 13.5T etched. Nickel sintered rotor with one balance ring, dia, 7.21 core. Adjustable sensor plate timing Brushless 13.5 Turns TPBLM Black Aluminium End-Plates, etched. 5 outer timing threads, 3 sensor mount threads. Black & Gold stator sleeves with 13.5T etched. Nickel plated sintered rotor, 12.3 dia, 7.24 core. No balancing rings Graupner GM Brushless Pt.# version. Gun-Metal Aluminium End-Plates, GM-Racing etched. 5 timing threads. Gun-Metal stator sleeve with S13.5T & Pt.# etched. Side entry sensor plug. Black sintered rotor, 12.3 dia, 7.22 core. Rotor with one balancing ring LRP X12 Vector Stock Spec. Pt.# Black moulded End-Bell with XTEC. Sleeve etched "13.5 Turns". Black Sintered rotor, 12.5 dia, 7.1 core. Rotor shaft, Black. Manufacturers 'grooved' Al. End-Bell with name engraved allowed at terminal end. Optional green rotor , 7.1 core Later versions have rotor shaft stamped Nosram Pure Evolution Spec. Racing Version. Pt.# Black moulded End-Bell with XTEC. Sleeve etched "13.5 Turns". Black Sintered rotor, 12.5 dia, 7.1 core. Rotor shaft, Black. Manufacturers 'grooved' Al. End-Bell with name engraved allowed at terminal end. Optional green rotor , 7.1 core Later versions have rotor shaft stamped LRP Vector X11 Stock Spec Black moulded End-Bell with XTEC. Red anodised ring. Chamfered mounting face. Sleeve etched "13.5 Turns". Sintered rotor, 12.3 dia, 7.35 core. Rotor shaft, Black. Manufacturers 'slotted' End Plates (std. & thin versions) allowed at pinion end. Manufacturers later 'grooved' Al. End Plate with name engraved allowed at terminal end Speed Passion R Pt.# SP138135V3 Light Gun-Metal Aluminium End- Plates, SP & 13.5T etched. Light Gun-Metal stator sleeve with SP13.5T etched. Black sensor board. Black sintered rotor with one balance ring, 12.3 dia, 7.22 core. Adjustable timing GM Brushless Pt.# Dark Gun-Metal Aluminium End-Plates, GM-Racing etched. Dark Gun-Metal stator sleeve with S13.5T & Pt.# etched. Black sintered rotor, 12.3 dia, 7.2 core. Rotor with one balancing ring Nosram Spec.' Storm Evolution Pt. No Black moulded End-Bell with XTEC. Red anodised ring. Chamfered mounting face. Sleeve etched "13.5 Turns". Sintered rotor, 12.3 dia, 7.35 core. Rotor shaft, Black. Manufacturers 'slotted' End Plates (std. & thin versions) allowed at pinion end. Manufacturers later 'grooved' Al. End Plate with name engraved allowed at terminal end Paul Worsley. (EFRA Elec. Chairman). Last update
Brushless 'Spec.' Motors (21.5 Turn) v6
Motor Builder Type/ Range Brushless 'Spec.' Motors (21.5 Turn). 2017 v6 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (21.5 Turn) v13
Motor Builder Type/ Range Brushless 'Spec.' Motors (21.5 Turn). 2017 v13 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
05' - Brushless 'Spec.' Motors (13.5 Turn)
05' - Brushless 'Spec.' Motors (13.5 Turn) Note: These motors differ from Brushless 'Modified' motors. 2016 v7 Motors on this list have to comply with BRCA Electric Board 'Spec.' Brushless Rules, Section
Brushless 'Spec.' Motors (10.5 Turn) v3
Brushless 'Spec.' Motors (10.5 Turn). 2016 v3 Motor Builder Type/ Range EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (13.5 Turn) v9
Brushless 'Spec.' Motors (13.5 Turn). 2015 v9 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Motors shown on this list are "Known to Comply" with EFRA 2015 Rules for Brushless 'Spec.' 13.5T Motors. s
05' - Brushless 'Spec.' Motors (13.5 Turn)
05' - Brushless 'Spec.' Motors (13.5 Turn) Note: These motors differ from Brushless 'Modified' motors. 2017 v13 Motors on this list have to comply with BRCA Electric Board 'Spec.' Brushless Rules, Sections
05' - Brushless 'Spec.' Motors (10.5 Turn)
05' - Brushless 'Spec.' Motors (10.5 Turn) Note: These motors differ from Brushless 'Modified' motors. 2015 v8 Motors on this list have to comply with BRCA Electric Board 'Spec.' Brushless Rules, Section
Brushless 'Spec.' Motors (13.5 Turn) v2
Motor Builder Type/ Range Brushless 'Spec.' Motors (13.5 Turn). 2018 v2 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (21.5 Turn) v7
Motor Builder Type/ Range Brushless 'Spec.' Motors (21.5 Turn). 2018 v7 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (10.5 Turn) v2
Motor Builder Type/ Range Brushless 'Spec.' Motors (10.5 Turn). 2018 v2 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Spec.' Motors (13.5 Turn) v4
Motor Builder Type/ Range Brushless 'Spec.' Motors (13.5 Turn). 2018 v4 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
Brushless 'Modified' Motors (All Winds) v7
Motor Builder Type/ Range Brushless 'Modified' Motors (All Winds). 2018 v7 EUROPEAN FEDERATION RADIO CONTROLLED AUTOMOBILES Samples of Motors included on this list have been checked for compliance to EFRA
17.5 Spec Motor List Scotty Ernst Productions September 22, 2017
Absima Revenge V2 Part # 2130021 AccuVance LUXON KG 17.5T AccuVance LUXON BS Dual 17.5T Amain.com Eco Power Slingshot ECP-8000 Corally Corally Pro Silver - 399175 Corally Dynospeed Spec 3.0, C-61102 Dualsky
17.5 Spec Motor List Scotty Ernst Productions June 12, 2018
Absima Revenge V2 Part # 2130021 AccuVance LUXON KG 17.5T AccuVance LUXON BS Dual 17.5T Amain.com Eco Power Slingshot ECP-8000 Arrowmax Dash R-Tune Part # DA740175 Corally Corally Pro Silver - 399175 Corally
Epic Nemesis 17.5T # TRI December 11, 2009
Manufacturer Name/Description 17.5 μh* Approval Date Dynamite DYNP1017 Quantex 17.5T 33.5 February 10, 2012 Eco Power Eco Power Slingshot ECP-8000 (w/12.5mmrotor) can use ECP-8010 (123mm option rotor)
The provisions of this rewritten Section 8.4 will become effective October 1, 2017 except where otherwise noted in the rules.
The provisions of this rewritten Section 8.4 will become effective October 1, 2017 except where otherwise noted in the rules. 8.4 ELECTRIC BRUSHLESS MOTOR RULES 8.4.1 General: 8.4.1.1 Sensor based motors
4.0.5 Ceramic magnets only (cobalt and rare earth magnets specifically not allowed).
4.0 Motors Modified: Only brushed or brushless motors approved by IFMAR, ROAR EFRA & BRCA may be used. 4.0.1 Brushed Motors: General definition of a Brushed Motor: 4.0.2 Specifications; 05 sized displacement.
IFMAR ELECTRIC RACING BATTERIES and MOTORS
IFMAR ELECTRIC RACING BATTERIES and MOTORS 1/12 TH & 1/10 TH ISTC and 1/10 th OFF ROAD Version: 25 November 2017 (replaces September 2016) INDEX BATTERIES 2 1 APPRO VAL PROCEDURE BATT ERIES 2 2. BATTERIES
The South African Radio Drivers Association For On Road Electric Model Cars
The South African Radio Drivers Association For On Road Electric Model Cars Car Specifications for 1/10 th and 1/12 th Scale Electric Model Racing Cars 2018 Release This Document supersedes all previous
Stay up-to-date via RSS!
Page 1 of 6 Stay up-to-date via RSS! enter keywords and hit en Search ROAR Approved Non-Timing Manufacture Part Number Name/Description Software Version Affiliate Tech Details Calandra Racing Concepts
IFMAR ELECTRIC RACING BATTERIES and MOTORS
IFMAR ELECTRIC RACING BATTERIES and MOTORS 1/12 TH & 1/10 TH ISTC and 1/10 th OFF ROAD Version: 20 October 2016 V3 (replaces October 2015) INDEX BATTERIES 2 1 APPRO VAL PROCEDURE BATT ERIES 2 2. BATTERIES
Stock Spec ESC List neutral and when set to the no-timing profile #1 Calandra Racing Diamond Castle Creations Mamba Max Pro V1.
Calandra Racing CRC4000 Advanced Electronics 2.1 software or Has a blinking blue light when the throttle is in Concepts Black Diamond LV higher neutral and when set to the no-timing profile #1 Calandra
Stock Spec ESC List neutral and when set to the no-timing profile #1 Calandra Racing Diamond Castle Creations Mamba Max Pro V1.
Calandra Racing CRC4000 Advanced Electronics 2.1 software or Has a blinking blue light when the throttle is in Concepts Black Diamond LV higher neutral and when set to the no-timing profile #1 Calandra
AGENDA ELECTRIC SECTIONS GENERAL.
EFRA ANNUAL GENERAL MEETING HOTEL Holiday Inn, Brussels Belgium 3rd to 4th of November 2012 AGENDA ELECTRIC SECTIONS GENERAL. 1. CHAIRMAN S WELCOME Mr. Heiner Martin & Mr. Paul Worsley The Electric Track
All cars will use replica GT shells or club alternatives from the list of eligible shells given in Appendix 1
BRCA GT12 Circuit Rules 2011 2012 with DDRCC ammendments. Version 2.0-11 November 2012 This class is based on the principals of close, fair and low cost racing. This will make it both an ideal entry level
AGENDA ELECTRIC SECTIONS GENERAL.
EFRA ANNUAL GENERAL MEETING HOTEL Sercotel Sorolla Palace Valencia, Spain 1 st and 2 nd of November 2014 AGENDA ELECTRIC SECTIONS GENERAL. 1. CHAIRMAN S WELCOME Mr. Heiner Martin & Mr. Paul Worsley The
carbon fiber before assembly. Sand glue to the edges and
chassis and carbon fiber give you a before assembly. Sand glue to the edges and 5 BAG MARKED CA BAG MARKED M3x6 Flathead 4 03 4 05 BAG MARKED 2 10 13 Installing Steering System Shock Assembly M4x28
Graupner GmbH & Co. GM-Genius 150, GM-Genius 75, GM-Genius 90 approved all as picture below.
Advanced Electronics Calandra Racing Concepts CRC4000 Black Diamond LV 2.1 Has a blinking blue light when the throttle is in neutral and when set to the no-timing profile #1 Calandra Racing Concepts CRC4002
BRCA Approved Zero-Timing Blinky ESC s
The following list detils the speed controllers pproved for use in the stock clss during the BRCA 1/12 th Electric Circuit Ntionls nd the modes in which they must be run. This list is derived from the
Regulations for the European Finals 2014
Regulations for the European Finals 2014 September 4th, 2014 September 7th, 2014 in Steyregg/Austria Older issues of these regulations lose their validity with this document! Table of Contents Preamble...
4.0.6 Approved motors may be modified by re-winding, balancing, truing of commutators, epoxy, ball bearings, brushes and custom brush systems only.
4.0 Motors Modified: Only brushed or brushless motors approved by IFMAR may be used. 4.0.1 Brushed Motors: General definition of a Brushed Motor: 4.0.2 Specifications; 05 sized displacement. Can diameter
Eastbourne Electric Car Club Tamiya M-Chassis Rules
Eastbourne Electric Car Club Tamiya M-Chassis Rules 1. Chassis 1.1. The only permitted chassis allowed in the Tamiya M-Chassis class are, M-03, M-05, M-06 and M-07 (including R, S Spec and Pro versions).
YAMAHA TRACK RUNNER SLIDE DRIVE SPROCKETS
Suspension -40 YAMAHA TRACK RUNNER SLIDE 929-6201 $6.95-J OEM 8E3-47422-00-00 929-6203 $7.95-J 8F3-47422-01-00 Fits: Fits: Model Year Model Year Model Year Model Year BR 250 85-88/91/93 GS 340 77-78 BR
UCL AIR OVERHP,3450RPM,1PH,60HZ,182TZ,36
Product Information Packet UCL570 5-7 AIR OVERHP,3450RPM,1PH,60HZ,182TZ,36 Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless otherwise
EFRA ANNUAL GENERAL MEETING HOTEL Holiday Inn, Brussels Belgium 5-6th of November AGENDA ELECTRIC SECTIONS GENERAL. Sat
EFRA ANNUAL GENERAL MEETING HOTEL Holiday Inn, Brussels Belgium 5-6th of November 2011 AGENDA ELECTRIC SECTIONS GENERAL. Sat. 5.11.11. 1. CHAIRMAN S WELCOME Mr. Heiner Martin & Mr. Paul Worsley The Electric
AGENDA ELECTRIC SECTIONS GENERAL.
EFRA ANNUAL SECTION MEETING HOTEL Hesperia Sant Just Barcelona, Spain 31 st October and 1 st of November 2015 AGENDA ELECTRIC SECTIONS GENERAL. 1. CHAIRMAN S WELCOME Mr. Heiner Martin & Mr. Paul Worsley
GP1-R SPORTBIKE SUPERSPORT REAR FENDER KIT EXHAUST
Jardine's prized research and development department continues to exhibit excellence in design and fit! Manufacturing exhaust systems using the latest technology. High tech CMM and Vector Infrared Tracer
Billet Aluminum Alt/Gen Pulley Made from 6061 T6, available in Chrome or Anodized Black, and includes 8 Shims for belt adjustment.
Billet Aluminum Alt/Gen Pulley Made from 6061 T6, available in Chrome or Anodized Black, and includes 8 Shims for belt adjustment. CB s Billet Aluminum Alt/Gen Pulley Hex Nut & Spacers are also available.
LSPXMV FCR Atmospheres containing explosive dust FCR asynchronous brake motors. General information
General information GENERAL USE : U.G. Enclosed three-phase brake asynchronous motors, LSPXMV series with failsafe brake, according to IEC 6003, 60072, EN 50281. Single speed : 0.25 to 11, frame size from
Model Set A Figure A.1 1:144 Scale Cargo Launch Vehicle Overall Dimensions. 2.3 Dia Dia. 14.7
Model Set A Figure A.1 1:144 Scale Cargo Launch Vehicle Overall Dimensions 6 2.3 Dia. 1 Dia. 23.2 14.7 29.2 4 Faceted Shroud not curved Acrylic Fuselage SEP Rockets (4Ct) Detail Grooves (see below) 5 SSME
INSTRUCTION MANUAL GLOBAL SERIES BRAKE MODELS: GBA, GBAM, GBB, GBBM, GBC, GBCM, GBD, GBDM, GBE, GBEM
222 W. Memorial Road, Oklahoma City, OK 73114-2317 Phone: 1-800-624-7697 Fax: 405-755-8425 www.magpowr.com E-mail: magpowr@magpowr.com INSTRUCTION MANUAL GLOBAL SERIES BRAKE MODELS: GBA, GBAM, GBB, GBBM,
FWD Drag Series Class Rules
FWD Drag Series Class Rules Updated 2019 FWD DRAG SERIES Designations FWD preceded by car number. Designed for full-bodied front wheel drive cars. The class is run on a.4 second Pro tree. Minimum weights
November 2017 RECONDITIONING SERVICES We race condition any brand armature. Every armature is ultrasonically cleaned, diamond trued, and precision rebalanced. We take the lightest cut possible to true
Product Information Packet IDXM7144T 5HP,1750RPM,3PH,60HZ,184TC,X0640M,XPFC
Product Information Packet IDXM7144T 5HP,1750RPM,3PH,60HZ,184TC,X0640M,XPFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
contents about the range
contents Overview 3 Motor data PBL42 4 PBL60 5 PBL86 6 Technical information 7 Controller data S controller 9 N and B controllers 10 50B controller 12 EMC Directive compliance 13 Geared motors PBL42 motor
Mfg / Motor Style 12V Comments Class 1 Class 2 Group B Scaleauto SC23 Home Set "white" FF gcm/12v, 1.1W/12v X X Scaleauto SC24
Mfg / Motor Style RPM @ 12V Comments Class 1 Class 2 Group B Scaleauto SC23 Home Set "white" FF-050 10000 45 gcm/12v, 1.1W/12v X X Scaleauto SC24 Home Set "white" FC-130 10000 100 gcm/12v, 2.5W/12v X X
24h Verbano
Tecnical Rules Foreword I. This regulation is the comprehensive list of the conformity requirements of the Slot it car models entitled to race. Any modifications not listed are illegal. Some prohibitions
C13.10 CHRONO LOCKCASE AND PERIMETER LOCKING SET C13 SIDE HUNG WINDOWS
C13 SIDE HUNG WINDOWS CHRONO LOCKCASE AND PERIMETER LOCKING SET 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
Section 12. Contain-It Secondary Containment Piping System. Serviced by GF Little Rock
Section 12 Contain-It Secondary Containment Piping System Serviced by GF Little Rock Table of Contents Contain-It Pipe 12.4 Fittings 12.5 Terminations 12.7 Centralizers 12.8 Accessories 12.9 Adhesive Requirements
IDM4115T 50HP,1775RPM,3PH,60HZ,326T,1262M,TEBC,F1
Product Information Packet IDM4115T 50HP,1775RPM,3PH,60HZ,326T,1262M,TEBC,F1 Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless otherwise
Double action door rails
The solution for heavy doors. Convincing in quality and design. CONTENTS Technical details 26-29 Materials and surface finishes 290 Product information 105 mm door rails: 55/65 mm pivot point 291-292 22/24
Basic Motor Theory. Introduction
Basic Motor Theory Introduction It has been said that if the Ancient Romans, with their advanced civilization and knowledge of the sciences, had been able to develop a steam motor, the course of history
SPARE PART LIST LIFTKET Version B13
Issue January 2014 SPARE PART LIST LIFTKET Version B13 SP-Code Description Description of spare part section Page AA Lifting gear 01: Hoist body 4-5 02: Clutch Brake 6-8 03: Stator 9-10 04: Gear 11-13
BZ40. Dal 1901 COD
COD. 9901.09 REV.00 POS CODE TABLE 1 Mod. PM DESCRIPTION 1 0709LW CUPS-HEATER GRID 7817801 SCREW TPS M X 1 18 WASHER FOR SPRING D H OT NICKEL-PLATED 01 ASSEMBLY CUPS-HEATER 91 ASSEMBLY BODY STAINLESS STEEL
WKA 2010 MANUFACTURER S CUP TAG SERIES REGULATIONS
WKA 2010 MANUFACTURER S CUP TAG SERIES REGULATIONS Contact information and updates can be found at www.ovka.com The following regulations are guidelines ONLY. Please refer to 2010 WKA Technical Manual
CUSTOM SLOT RACING TIRES and accessories
CUSTOM SLOT RACING TIRES and accessories PRO-TRACK CORPORATION 125 CREEK CROSSING PORT ORANGE, FL 32128 U.S.A. PH/FX (386)763-5005 E-MAIL protrack@earthlink.net " IT IS THE LORD THAT TEACHES YOU TO PROFIT
MOTORSPORT TYRES 2019
MOTORSPORT TYRES RACING TYRES RADIAL A00F/A00Y A00N A00G/A00C for GT CARS ADVAN /SLICK A40 20 1 20/R20 330/R1 3/0R1 300/0R1 20/0R1 240/0R1 N3 N3 1 330/R1 N2 330/R1 20/R1 300/0R1 20/0R1 N2 N220 320/0R1
Product Information Packet IDXM HP,1735RPM,3PH,60HZ,56C,3514M,XPFC,F1
Product Information Packet IDXM7006.5HP,1735RPM,3PH,60HZ,56C,3514M,XPFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
JAPANESE CAR BRAKE APPLICATIONS
JAPANESE CAR BRAKE APPLICATIONS FAST ROAD & TRACK DAY BRAKE UPGRADES BIG BRAKE KITS - RACE DISCS AND PADS PADS MAKE / YEAR MODEL APPLICATION FRONT REAR HONDA 93-00 Civic Coupe Exc. EX & Si models 0273
Product Information Packet IDXM HP,1750RPM,3PH,60HZ,56C,3512M,XPFC,F1
Product Information Packet IDXM7002.33HP,1750RPM,3PH,60HZ,56C,3512M,XPFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
Q22 series. Ø22 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING
IND-Q22-17-07 DISTINCTIVE FEATURES 16.75 mm colored diffused epoxy lens or 16.75 mm super bright LEDs Secret until lit polycarbonate decals or custom engraving (2.8 x 0.8) solder lug/faston terminals,
BREMBO HIGH PERFORMANCE GRAN TURISMO APPLICATION LIST
BREMBO HIGH PERFORMANCE GRAN TURISMO APPLICATION LIST GRAN TURISMO LINE The line is available for the most demanding customers. This braking system originates from the Racing components, consisting of
COMER SW80 TECHNICAL SPECIFICATIONS
VERSION 3 / 2013 UPDATED AUGUST 20 th, 2013 DOCUMENT UPDATE SCHEDULE It is certified that the updates listed below have been approved by the Australian Karting Association and have been incorporated into
Products & Services EQ Series AC Drives. TEAMMaster WOUND ROTOR MOTORS WORLD SERIES SYNCHRONOUS MOTORS. EXPLOSION PROOF (Division 1, Zone 1)
630-543-7867 Products & Services EQ7 1-1000 hp Intelligent Keypad with Extensive Diagnostics Select Any of 4 Control Methods - V/ Hz - Dynamic Torque - Sensorless Vector - Closed-loop Vector Quick Setup
Direct immersion resistance thermometer
Direct immersion resistance thermometer PLAIN STEM D100-101-102-103-160-162 CONFIGURATIONS General use RTD Product series PT100WT D100 D101 D102 D103 D160 D162 2 Features assembly The sensor can be immersed
Ariel Atom Standard Hardware Build List
Brammo Grade and STAINLESS STAINLESS Key ITEM PN QTY Size Type Material Finish Detail TORQUE SPECS TORQUE SPECS TORQUE SPECS IN FT-LBS IN FT-LBS IN IN-LBS 0 (PT) Power train 1 PT 1 HF-M12-60 9 M12-1.75
MANUFACTURING SPECIFICATION
Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures
Motorized Pulley 500L, 500M & 500H, Ø 500 mm
Motorized ulley 500L, 500M & 500, Ø 500 mm To match your requirements in diameter 500 mm, our product range offers three different loading performances for your BULK applications: - L for Light-duty -
Engine Builders / Racing Sonic Testers, Transducers & Accessories - Price List Date: 01/01/18
Engine Builders / Racing Sonic Testers, Transducers & Accessories - Price List Date: 01/01/18 The PR-8 Series of gauges are packaged in an all aluminum case making them the most durable gauges on the market.
Variable speed asynchronous motors with FCR brake LSMV FCR. General information
General information GENERAL USE : U.G. Closed three-phase asynchronous brake motors, LSMV series with failsafe continuous (dc) brake, according to IEC 3, 72, EN 50281. Single speed : 0.25 to 11, frame
Service Parts. John Deere 3029DF 3029TF 3029TF270. Engine. Engine Models: Generator Models: 20ROZJB REOZJB 20DSJB DSEJB.
Service Parts Engine Engine Models: John Deere 3029DF 3029TF 3029TF270 Generator Models: 20ROZJB 20--40REOZJB 20DSJB 20--40DSEJB TP- 12/03b Table of Contents Description Page Description Page Introduction...
M Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
Accessories. The extensive accompaniment for glass doors.
The extensive accompaniment for glass doors. CONTENTS Materials and surface finishes 138 Product information Door rails 139-140 Door holders 141 Hinges - special applications 142 Door stop and strike plates
OFF ROAD COMPETITION
OFF ROAD COMPETITION GYTR Performance Products are especially developed for closed circuit use only and they are not street legal. GYTR Performance Products Range Off Road Competition 1 YZ85 GYT-5PA35-10-AL
A Global View of. High Efficiency Electric Motors. By Dan Jones Incremotion Associates, Inc. Thousand Oaks, CA
A Global View of High Efficiency Electric Motors By Dan Jones Incremotion Associates, Inc. Thousand Oaks, CA 1 Motor Operation AC induction motors are our dominant motor technology in terms of consuming
Briton Briton 121CE Briton 121 Series
121 Series Briton 121CE Briton 121 Series The Briton 121 Series provides the traditional strengths of the Briton range, its quality of performance, durability and reliability in a compact economy range
2017 Thunder Series 602 Thunder Series Rules
2017 Thunder Series 602 Thunder Series Rules Chassis: 1. Must follow FASTRAK rules. 2. Chassis must be built prior to 2014 Body: 1. Must follow FASTRAK body rules 2. 8 spoiler permitted 3. No 12 side braces
Standardmotoren Standard motors
Standardmotoren Standard motors Contents Product description 2/2 Overview of technical data 2/5 2 Series W4.R for Premium Efficiency IE3 2/6 Series WE.R for High Efficiency IE2 2/14 Series K2.R for Standard
Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
Body Length (mm) New Tool Ref Length (mm)
3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *
334A or 334AB. Number of piston rings 1 Number of exhaust ports 2. Big end conr. Ball-bearing diam. 18X24X15 Combustion chamber shape Spherical
125cc LEOPARD FEATURES Cylinder volume 123.67 cc Bore 54 mm Max. theoretical bore 54.28mm Stroke 54mm Cooling system Water Inlet system Reed valve Number of carbs 1 Tillotson HL Carb. 334A or 334AB Cylinder/crankcase
EM7047T-I 7.5//5HP,1770//1475RPM,3PH,60//50HZ,213T
Product Information Packet EM7047T-I 7.5//5HP,1770//1475RPM,3PH,60//50HZ,213T Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless otherwise
Suzuki bikes. Brake Line kits.
Suzuki 125 FU 1993 1 Standard 1 Suzuki 250 ET - ET 1980 1 Standard Suzuki Address 125 2008 1 Standard Suzuki AN400 Burgman 2004 2008 3 Standard 1 Suzuki AP50 1996 2002 1 Standard Suzuki B-King 2008 2 Over
Edition 3 July Air Grinder. M2 Series. Parts Information. Save These Instructions
48420541 Edition 3 July 2015 Air Grinder M2 Series Parts Information Save These Instructions M2 Series Air Grinders - Exploded View (Motor & Motor Housing) 22 21 16 14 15 13 7 5 4 2 1 20 12 6 3 31 29 28
SY Type Control Cable 0.5mm 2 to 120mm 2 PVC Sheath
Applications Control cables in tool machinery, plant installation, power stations and data equipment. The braided screen of the galvanized steel wires offers the best possible protection against mechanical
Solid Carbide Performance Routers
Solid Carbide Routers Hard Wood Soft Wood MDF Hard Plywood Soft Plywood Composite Wood Laminated Wood Chipboard Manufactured in Manufactured inthe theusa USA Distributed in Distributed inthe theuk UK Solid
Engineer The Lift!! HOIST RINGS. Applied Load Changes With Sling Angle. Sample Calculation: DO S DON TS
H&O DIE SUPPLY, INC. 1-800-222-5441 sales@hodie.com HOIST RINGS 10 Adjustable Alloy Chain Sling... 10.16 Center Pull Style... 10.4-10.5 Envirolox Protective Finish... 10.11 Eye Bolts... 10.15 Eye Nuts...
race FanS Rigid all metal fans provide maximum airflow at low and high RPM.
315 400 SerieS one PieCe molded FanS Molded nylon fans are ideal for race & performance applications when cost or weight is a concern. 14 Clockwise 414 15 Clockwise 415 16 Clockwise 416 17 Clockwise 417
PARTS LIST. X Series Gas Restaurant Ranges X24 / X36 / X60. models. Parts & Service.
X Series Gas Restaurant Ranges models X24 / X36 / X60 PARTS LIST Parts & Service P (USA & Canada): 1 800 427 6668 F (USA & Canada): 1 800 361 7745 www.garland-group.com Garland Commercial Ranges, Ltd.
Product Information Packet IDXM7014T 1HP,1760RPM,3PH,60HZ,143TC,3520M,XPFC,F1
Product Information Packet IDXM7014T 1HP,1760RPM,3PH,60HZ,143TC,3520M,XPFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
mirrors with For 74 H-D rigid For Sportster H-D swingarm.
PRE- ORDER NOW! SHIPS DEC 31 QUICK RELEASE SEAT PINS These solo seat mounting brackets eliminate having to weld your own mounts. 82-72 For 74 H-D rigid. 82-73 For Sportster H-D swingarm. 82-73 Threads
JB1 for VAG EA888 Gen 3 engines Install Guide Last Updated: /201
JB1 for VAG EA888 Gen 3 engines Install Guide Last Updated: /201 Use subject to terms and conditions posted at http://www.burgertuning.com/terms.htm THIS PART IS LEGAL FOR USE ONLY IN COMPETITION RACING
PRODUCT CATALOG MOTORS & CONTROLS. franklinwater.com
PRODUCT CATALOG MOTORS & CONTROLS franklinwater.com SUBMERSIBLE MOTORS & CONTROLS 4" Submersible Motors... 2 Specifications and Materials...3 Ordering Information...4 Dimensions and Weights...9 Leads
Motorized Pulley 630M & 630H, Ø in. (630 mm)
Our 24.80 diameter Motorized Pulley range fers two different performance levels for BULK applications: - M for Medium duty - H for Heavy duty It is important to note the product differences and choose
Fitting Slot.it chassis for Carrera DTM with Slot.it parts
Fitting Slot.it chassis for Carrera DTM with Slot.it parts If you have purchased a 3D printed DTM chassis for Carrera DTM models, or if you're planning to do so, here's what you need to know in order to
EUROPEAN FEDERATION OF RADIO OPERATED MODEL. Automobiles. Appendix 3 HANDBOOK
EUROPEAN FEDERATION OF RADIO OPERATED MODEL Automobiles Appendix 3 HANDBOOK 2010 EFRA Handbook 2010 APPENDIX 3 ELECTRIC CARS A GENERAL 1. RACETRACK SPECIFICATIONS for electric classes 1.1.1 For EFRA-sanctioned
3. Each car must have a front brass weight(s) as made by the chassis manufacturer for that specific chassis.
GRAVITY CLASS RULES 1. Cars must be brass weighted, inline motor chassis manufactured by BSRT, Slottech, or Wizzard High Performance. Eligible chassis include the V1, BSRT G3, G3R or G3RS, Slottech Panther
champion series motors
Introducing A brand new series of Super Performers Data Sheet champion series motors FRAME SIZE 63-132M TEFC 3 Phase Squirrel Cage Induction Motors Siemens CHAMPION Series Cage Motors are suitable for
MIG/MAG welding gun range
MIG/MAG welding gun range Designed for comfortable and productive welding The best combination of weight and balance ensures welding craftsmen comfortably deliver their skill weld after weld. Choose from
Threaded fittings. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready