REPAMAX * PRODUCT SPECIFICATIONS. (40mm mm) EPDM GASKET FEATURES SPECIFICATIONS (**) STANDARDS RANGE/SIZE RANGE/LENGTH MATERIALS
|
|
- Barbra Hawkins
- 5 years ago
- Views:
Transcription
1 REPAMAX * (40mm - 0mm) EPDM GASKET EN PRODUCT SPECFCATONS FEATURES UNQUE VERSATE COUPNG, CAN BE STAB FT OR WRAPPED AROUND PPE DURABE STANESS STEE, MONOBOCK DESGN AOWS 3 DYNAMC DEFECTON PER END, REDUCNG FUTURE PPE DAMAGE FAST AND EASY TO NSTA SUBSTANTAY REDUCES NVENTORY DURABE UNDER EXTREME CONDTONS 40mm - mm ONE COSNG MECANSM. 6mm - 0mm TWO COSNG MECANSMS AVAABE N STANDARD AND G-PRESSURE VERSONS SPECFCATONS (**) STANDARDS RANGE/SZE RANGE/ENGT MATERAS BODY UG MATERA COMPRESSON BEAM & ADJUSTNG PN A PRODUCTS MEET OR EXCEED STANDARDS NSF-61 AND NSF-372. RANGE 12 AND 22 PRODUCTS UP TO WERE APPROVED BY 3RD PARTY AC AB ACCORDNG TO EN STANDARD SZES AVAABE N NOMNA DAMETERS OF 40mm mm. 6mm 0mm ARE MTO (MADE TO ORDER). RANGE 12mm AVAABE N SZES 40mm mm. RANGE 22mm AVAABE N SZES mm mm. RANGE 32mm AVAABE N SZES 1mm mm. RANGE 10mm AVAABE N SZES 6mm 0mm. RANGE 12mm AVAABE N ENGTS mm AND mm. RANGE 22mm AVAABE N ENGTS mm, mm, AND mm. RANGES 10mm AND 32mm BOT AVAABE N ENGTS mm AND mm. STANESS STEE AS mm mm: POYCARBONATE. 3mm 0mm: REG. PRESSURE PRODUCTS USE POYCARBONATE.*** 3mm 0mm: G PRESSURE PRODUCTS USE STANESS STEE. AS 304 CASTNG (ASTM-A351-CF8). CASTNG AS 304 (ASTM-A351-CF8). GASKET EPDM COMPOUNDED FOR WATER AND SEWERAGE AVAABE N A RANGES. MEETS NTERNATONA STANDARDS FOR CONTACT WT DRNKNG WATER: NSF-61, KTW-UBA Eastomer guideine, W2, XP P 41-2, AS/NZS 4020, AND BS 6920 ASO MEETS DN EN FOR WATER AND DRANAGE APPCATONS. * The product is protected by various patents registered in various countries. ** For detais about Made to Order (MTO) products pease contact your KRAUSZ distributor. *** mm, at 22, and engths mm and mm, aso uses Stainess Stee ugs. 1
2 REPAMAX (40mm - 0mm EPDM GASKET) PRODUCT SPECFCATONS EN SPECFCATONS (*) MATERAS GASKET BRDGE NNER PATE NNER PATE BOTS NUTS AND BOTS AS 304 STANESS STEE. AS 304 STANESS STEE. 40mm mm: AS 316 SCREW NSUATED WT UTEM RESN 0. 6mm 0mm: AS 316 SCREW. AS 304 STANESS STEE. ROED TREAD AND ANT-GANG COATNG. PRODUCT PERFORMANCE WORKNG TEMPERATURE FEXBE DYNAMC DEFECTON TRANSTON CAPABTY MN. PPE NSERTON MAX. CRACK WDT MAX. OUT OF ROUNESS MAX. OFFSET FOR MSAGNED PPE VACUUM TEST CONTNUOUS OPERATON -30 C UP TO +85 C SORT TERM OPERATON UP TO + C 3 ON EAC SDE RANGE 12mm 22mm 32mm 10mm 40mm mm mm mm 1mm mm 1mm mm 6mm - 0mm TRANSTON 4mm 6mm 10mm 10mm 6mm 45mm 75mm. SEE SUBMTTA DRAWNGS FOR DETAS ON SPECFC PRODUCT SZES. PRODUCT ENGT CRACK WDT mm mm 1mm mm 6mm 0mm 6mm mm 6mm 8mm PRODUCT ENGT & MAX. OFFSET UP TO 6 UP TO BAR WORKNG PRESSURE NOMNA PPE SZE REG. PRESSURE (BAR) G PRESSURE (BAR) 40mm mm 1mm 0mm mm WORKNG RATED WORKNG PRESSURE PRESSURE PRESSURE RATED PRESSURE WORKNG RATED PRESSURE PRESSURE mm 0mm SEE SUBMTTA DRAWNGS FOR DETAS * For detais about Made to Order (MTO) products pease contact your KRAUSZ distributor. 2
3 PRODUCT TABES - RANGE 12mm 40-, ENGT G MN NOMNA SZES 40-mm 16 BAR s ength / NOMNA SZES 40-mm 24 BAR s ength /
4 PRODUCT TABES - RANGE 12mm 40-, ENGT G MN NOMNA SZES 40-mm 16 BAR s ength / NOMNA SZES 40-mm 24 BAR s ength /
5 PRODUCT TABES - RANGE 22mm -, ENGT G MN NOMNA SZES -mm 16 BAR s ength NOMNA SZES -mm 24 BAR s ength
6 PRODUCT TABES - RANGE 22mm -, ENGT G MN NOMNA SZES -mm 24 BAR s ength
7 PRODUCT TABES - RANGE 22mm NOMNA SZES -mm 16 BAR (*) s ength / * See drawing on pg. 6 NOMNA SZES -mm 12 BAR (*) s ength * See drawing on pg. 6
8 PRODUCT TABES - RANGE 22mm -, ENGT G MN NOMNA SZES -mm 24 BAR s ength
9 PRODUCT TABES - RANGE 22mm NOMNA SZES -mm 16 BAR (*) s ength / M M M M M M * See drawing on pg. 8 NOMNA SZES -mm 12 BAR (*) s ength * See drawing on pg. 6 9
10 PRODUCT TABES - RANGE 32mm 1-, ENGT G MN NOMNA SZES 1-mm 12 BAR ength NOMNA SZES 1-mm 16 BAR ength
11 PRODUCT TABES - RANGE 32mm 3-, ENGT G MN NOMNA SZES 3-mm 11&12 BAR ength NOMNA SZES 3-mm 16 BAR ength S S S S S S S S S S S S
12 PRODUCT TABES - RANGE 32mm 1-, ENGT G MN NOMNA SZES 1-mm 12 BAR ength NOMNA SZES 1-mm 16 BAR ength
13 PRODUCT TABES - RANGE 32mm 3-, ENGT G MN NOMNA SZES 3-mm 11&12 BAR ength
14 PRODUCT TABES - RANGE 32mm NOMNA SZES 3-mm 16 BAR (*) ength S S S S S S S S S S S S S * See drawing on pg. 13 Copyright 2017 ndustries td., A rights reserved 14 PS0022 REV B
REPAMAX. Versatile Stainless Steel Coupling. Versatile Stainless Steel. By Krausz Wide-Range Couplings. Joins as a coupling. Repairs as a clamp.
JOIN REPAIR RESTRAIN REPAMAX Versatile Stainless Steel By Krausz Wide-Range Couplings Joins as a coupling. Repairs as a clamp. Versatile Stainless Steel Coupling REPAMAX Product Information Versatile Stainless
More informationSTAINLESS STEEL AISI 316L M PROFILE
VS STANESS STEE AS 316 M PROFE COUPNG SP COUPNG REDUCER WT PAN END STANESS STEE AS 316 S10AB-BP S10AC-BP 15 52 10 39 100 S10AD-BP 18 52 10 44 100 S10AE-BP 22 59 13 62 100 S10AF-BP 28 61 13 78 100 S10AG-BP
More informationHYMAX VERSA by Krausz Coupling and Repair Solutions
HYMAX VERSA by Krausz Coupling and Repair Solutions HYMAX VERSA. VERSATILE STAINLESS STEEL COUPLING. Krausz HYMAX VERSA products provide a highly versatile stainless steel coupling solution for connecting
More informationHYMAX GRIP by Krausz Restraint Solutions
HYMAX GRIP by Krausz Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. Krausz restraint products combine
More informationWide-Range Coupling Solutions
Wide-Range Coupling Solutions HYMAX. CONNECTING THE FUTURE. A revolutionary product that set a new industry standard, the HYMAX* product line has been field-proven in millions of installations world-wide.
More informationHYMAX GRIP Wide-Range Restraint Solutions
HYMAX GRIP Wide-Range Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. HYMAX restraint products combine
More informationFloating Ball Valve - Design Features
408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting
More informationProduct Range Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size Gate Valve Globe Valve Check Valve
Product Range Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size 2" 2.5" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 36" 40" 42" 48" 52" 54" 56" 60" 64" 150 300 API 600 & B16.34
More informationSource: Holmes Place 142
142 Source: Holmes Place Mandatory program: flter backwash Your flter ensures a mechancal cleanng of the water from coarse mpurtes (drt, har, skn partcles, etc.) and a recrculaton of the pool water by
More informationStromag. Electromagnetic Fail Safe Brakes Series NFA/NFF. Versions: Basic & Dockside Cranes. Stromag Limited
Stromag Electromagnetc Fal Safe Brakes Seres NFA/NFF Versons: Basc & Docksde Cranes Stromag Lmted 29 Wellngborough Road,Rushden Northamptonshre NN10 9YE Unted Kngdom Tel. 01933 350407 Fax. 01933 358692
More informationVacuum supply, overview
64 Vacuum supply Vacuum supply, overvew Vacuum unts Modular vacuum unts ompact vacuum unts Vacuum workstatons Vacuum pumps Lqud rng pumps Vacuum supply 65 Vacuum Supply Pumps Unts Workstatons pplcaton
More informationOur policy is one of continuous research and development. We therefore reserve the right
Tubing & Hose Metric Nyon, Poyurethane, Poyester Reinforced PVC, Meta Braided Rubber, Copper, Doube Wa Brazed Stee Avaiabe in a variety of different types to suit a wide range of appications A tubing can
More informationZ-50-S Standing Spindle 50 kn
Z-50-S Standng Spndle 50 kn Safety Safety nut nut New: Spndle lubrcaton durng operaton Ths page Secton.29 Secton.27 M12/16 deep 52J7/ deep M10/15 deep SRO Length M12/16 deep Fttng heght Y Overall heght
More informationPush-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented
Push-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented PE-100 / PVC-U pull-out resistant long type Push-Fit Transition Coupling for PE-100 and PVC-U water pipes up to 16 bar d90
More informationGEARED VANE AIR MOTORS. Type Ratio Version Output shaft Torque arm Optins
2 TECHNICAL FEATURES The man features of worm gearboxes used are: Alumnum housng Double taper roller bearng on sze 090 and 110. Permanent synthetc ol long-lfe lubrcaton Desgnaton GEARED VANE AIR MOTORS
More informationBS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
More informationMACRO HP. NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes. patent number:
ACROMACROMACROMA MACRO HP ROMAC S SECOND GENERATION TWO-BOLT E X T E N D E D R A N G E C O U P L I N G NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes patent number: 8448993 BMACROHP
More informationM21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationNAVSEA REVIEWED ASTM F-718. SiloxoGrip N-9020 (Spray/Roll Siloxane Non-skid)
NCP Coatngs, nc. NAVSEA REVEWED ASTM F-78 SoxoGrp N-92 (Spray/Ro Soxane Non-skd) ML-PRF-24667 f ths product s to be apped as part of a coatng system, a components of the system must be as sted on the QPL.
More informationUNIBOX Series. Enclosures and wiring accessories IP40 - IP55
Enclosures and wrng accessores IP - IP55 ENCLOSURES AND WIRING ACCESSORIES IP - IP55 GENERAL DESCRIPTION enclosures are desgned to accomodate EVOLUTION Seres accessores and, wth specfc bearng adaptors,
More information102 ALUFIX CLAMPING ELEMENTS
102 103 ALUFIX CLASSIC Clampng Elements Alufx clampng elements fx workpeces to fxtures and ensure contact wth support surfaces 104 ØB ØA 3 Jaw Keyless Chuck for measurng applcatons D C Nr. A B C D 82220
More informationCHECK VALVES DUAL PLATE CHECK VALVES (DC SERIES) NOZZLE CHECK VALVES (NC SERIES)
CHECK VAVES DUA PATE CHECK VAVES (DC SERIES) NOZZE CHECK VAVES (NC SERIES) eading Korean valve manufacturer DUA PATE CHECK VAVE (DC SERIES) Range Size Fluid Application 1 1/2 (40A) ~ 84 (2100A) Water,
More informationInstructions for the Replacement of CWP ROMA s and Repair of Lower Support Frame.
Instructions for the Replacement of CWP ROMA s and Repair of Lower Support Frame. The following information describes the procedure to remove, and replace ROMA s. In addition, the procedure for replacing
More informationS ELF-CLINCHING S TANDOFFS. Revised 409 SO-1. PennEngineering
S EF-INING S TANDOFFS Revised 409 SO-1 SEF-INING STANDOFFS These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted
More informationOperating Instructions Pneumatic drives
Operatng Instructons Pneumatc drves Pneumatc drves Equpment characterstcs Poston ndcator (detachable)! Settng screw for pvot angle 1 4 5 Ar nterface accordng to VDI / VDE 3845 (Namur) Advantages of the
More informationPolypress Pipes and Fittings
Poypress Pipes and Fittings Poypress pipes escription Weigt Tecnica data Product code Muti-ayer composite pipe coied PEX-AL-PEX kg/coi 16 x 2.0 x 100m 11.10 16 PP96016400 16 x 2.0 x 200m 22.20 16 PP96016700
More informationMaterials : Carbon steel or stainless steel
Size : Ends : Max Temperature : DN 15 to 600 mm Flanges PN10/16/25/40 + 150 C for flange gaskets, 200 C for flanges Max Pressure : 40 Bars for flanges PN40 Specifications : Welding flanges Flat flanges
More informationPrecision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections
A B C D E F G H J K L Die Sets Precision Ground Pates and Fat Bars Lifting and Camping Devices Shanks, ifter studs, eyebots Camping caws, screws and bots Guide eements Ground Precision Components Springs
More informationDK-Lok UHP Fittings. No.09-01(E) May 2017
K-ok UP Fittings No.09-01() May 2017 ean UP Fitting ontents ean Wed Fittings Micro bow WM Micro ee WM Micro ross ee WMX Micro ribow WMB Micro af bow WM Micro Reducing bow WMR Micro Reducing ee WMR 05 05
More informationRing and Spade Terminals
J Rng and Spade Termnals Applcaton Specfcaton 114-2084 25 J J AN All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and nches]. Unless otherwse specfed,
More informationWeb: Elk Grove, Califimiia I 8401 L1guna Palms Way. Modification or Addition to Improvement Standards and Details
Phone: 9166837111 Fax: 916691 168 Web: wwwelkgrovecityorg Elk Grove, Califimiia 95758 EK 8401 1guna Palms Way GROVE - PROUD HmGE BRGHT FUTURE- Modification or ddition to mprovement Standards and Details
More informationCruzPro UWSD-10. Ultrasonic 3D Wind Speed/Direction Sensor with NMEA 0183/RS422 Output. Other CruzPro Products
emai: info@cruzpro.com website: www.cruzpro.com Other CruzPro Products Wind Speed/Direction Dispay Depthsounders/w Kee Offset, Deep/Shaow/Anchor Drag Aarms PC Based DSP Fishfinder for Windows98, XP, 2000,
More informationSVC/SHC Series. Sanitary Check Valves. down process outflow and drain installations. NEW - SVC for vertical. How it Works:
SVC/SHC Series Sanitary Check Valves NEW - SVC for vertical down process outflow and drain installations The patented SVC/SHC Series are vertical and horizontal check valves designed specifically for use
More informationFasteners Inc. innovative fastener solutions TOOLS CATALOG. "Quality The First Time"
Fasteners Inc. innovative fastener solutions TOOS CATAOG "Quality The First Time" WHO WE ARE GOEBE FASTENERS INC. is a subsidiary of GOEBE GmbH, which has been the leading corporation in Europe for specialty
More informationISO-DE Double Eccentric Butterfly Valves
ISO-DE Double Eccentric Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com
More informationRANGER COUPLINGS RANGER COUPLINGS
RANGER COUPINGS RANGER products, in the form of wide range couplings and flange adaptors, are designed to join pipes of various outside diameters with the same or different nominal bore. ecause of the
More informationTRU-WELD Stud Welding
HEAE CONCRETE ANCHOR FU WE BASE TYPE CA STU TYPE F FERRUE SUPPIE Head (H) 1/2 for all 1/4 Headed Concrete Anchors. Head Height (HT) 3/16 for all 1/4 Headed Concrete Anchors. WE STU SPECIFICATIONS WE STU
More informationROMACON COUPLINGS AND FLANGE ADAPTORS
ROMACON COUPLINGS AND FLANGE ADAPTORS Couplings DN mm DN inches Range Romafit Weight kg 50 2 59-73 3,8 65 2,5 72-85 4,3 80 3 88-103 4,5 100 4 108-128 5,6 125 5 132-146 6,8 125 5 139-153 6,9 150 6 159-182
More informationPRECISION PUMP APPLICATOR
User s Manua nstaation & Operating nstructions PRECSON PUMP APPLCATOR For Box, Junior, and Custom Appicators For questions and/or product support contact the TW ROCOL North America Customer Service Department
More informationHow to Order. Auto switch. Without auto switch (Built-in magnet) Applicable Auto Switches/Refer to p for further details. Indicator.
Compact Side Series MXU How to Order MXU A90V S Compact side Bore size 1 ø ø ø1 1 2 Stroke mm mm 1mm mm 2mm mm Number of auto switches 2 Auto switch S 1 Without auto switch (Buit-in magnet) Appicabe Auto
More informationelectric fires available exclusively through independent fireplace showrooms
eectric fires avaiabe excusivey through independent firepace showrooms Wecome to the 2016/17 evonicfires brochure. evonicfires is a brand of CK Fires Ltd, situated just outside of Stratford-upon-Avon,
More informationM10Si ISO Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationLong thread stem nut to provide long thread life and permit the removal of hand wheel even at full open.
Design Feature Gate Valve O EMISSION FEATURE PEASE REFER PAGE:42 ong thread stem nut to provide long thread life and permit the removal of hand wheel even at full open. Spacer rg and sgle pac set for class
More informationInnovation. Simplicity. is Simply Better. Rotary Lobe Pumps
Innovation Simpicity is Simpy Better Rotary Lobe Pumps So simpe, yet so diverse. Pease add. Six series with 19 sizes. AL-series PL-series CL-series FL-series EL-series XL-series A pump modes are manufactured
More informationClampless Specifications Sheet
FAST Specifications Sheet F I T T S I N G Blazing Products, Inc. St. ouis, Missouri USA www.blazingproducts.com 1-877-304-2111 Fast Fitting Specs Max Operating Pressure: 80 PSI for #80 pipe; 100 PSI for
More informationPre assembled for quick installation. One fitting is able to connect multiple pipes materials. Approvals/Standards BS EN ISO 9001
Technical Guide WM5.1 Viking Johnson Couplers and Flange Adaptors Viking Johnson Maxi Range of universal pipe couplings represents the very latest in mechanical pipe coupling technology. Scan for more
More informationCerta-Lok YelomineTM
CertainTeed Certa-ok YelomineTM CertainTeed s Certa-ok Yelomine Restrained Joint PVC Pressure Pipe meets the performance requirements of ASTM D2241 Standard Specification for Poly (Vinyl Chloride) (PVC),
More informationMark 9020 Series. Sanitary Ball Valves. CRN Registration Number Available. condensate drain. See pages 9 & 10. New: Optional Integral bottom
Mark 9020 Series Sanitary Ball Valves CRN Registration Number Available New: Optional ntegral bottom condensate drain. See pages 9 & 10 The Mark 9020 Series ball valves take ASME BPE guidelines to heart.
More information740G Double Disc Check. Valve. Operation / Maintenance Manual. General Information 2. Installation/Operation 3
Operation / Maintenance Manual 740G Double Disc Check table of contents PAGE General Information 2 Installation/Operation 3 Troubleshooting & Disassembly/Reassembly 4 Parts Information 5 Valve! WARNING:
More informationTECHNICAL ENQUIRY SPECIFICATION OF BATTERY OPERATED PALLET TRUCK
BHEL ~.BANGALORE TECHNCAL ENQURY SPECFCATON OF BATTERY OPERATED PALLET TRUCK TRUPAT TRUMALA DEVASTHANA, TTD PALLET..o1 TECHNCAL SPECFCATONS OF BATTERY OPERATED PALLET TRUCK V. Sahadevan ssued by: BGA Oate:
More informationCAST BODY WEDGE GATE VALVES
CAST BODY WEDGE GATE VAVES FIG. 20-150, STAINESS STEE - CASS 150 D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. TFE impregnated packing for temperature to 450 o F/232
More informationFKT SERIES FLAT PANEL SOLAR COLLECTORS ROOF MOUNTING FOR WORCESTER SOLAR HEATING SYSTEMS
FKT SERIES FLAT PANEL SOLAR COLLECTORS ROOF MOUNTING FOR WORCESTER SOLAR HEATING SYSTEMS 60966.0-.SD G Installaton nstructons About ths manual Ths nstallaton manual contans mportant nformaton for the safe
More informationBULLETIN H JUNE DeZURIK KGC-BD BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES TECHNICAL SPECIFICATIONS
BUETIN 3-1H JUNE 2016 DeZURIK KGC-BD BI-DIRECTIONA CAST STAINESS STEE KNIFE GATE VAVES TECHNICA SPECIFICATIONS Materials of Construction Item Description Material A1 Body 304 Stainless Steel, ASTM A3 CF8
More informationS.B. 469 for information on GM applications). Both styles are shown in Figure 1. Figure 1
NO: 4263132 SERVICE BULLETIN DATE: January X,1993 Supersedes: S.B. 426R dated 11/7/89 SUBJECT: ZERO-CLEARAN CE GOVERNOR WEIGHT RETAINER ASSEMBLIES In June 1988, Stanadyne introduced a zero-cearance Eastomer
More informationASSEMBLY AND INSTALLATION
ASSEMBY AND INSTAATION STRAIGT AND EVE GUARDRAIING (using Tpes 10, 15, 20, 21, 25 & 26) Where: = distance between centres of uprights I = ength of horizonta tube = distance from ground to centre ine of
More informationTooling technology. Angle Heads METAL MACHINING.
Toolng technology Angle Heads META MACHINING AT ENZ WERKZEUGSYSTEME, OUR MAXIM, INNOVATION. PRECISION. PASSION. IS FAR MORE THAN JUST A MARKETING FORMUA. RATHER, IT DESCRIES THE CORE GOAS OF OUR USINESS
More informationKeystone CompoSeal Resilient Seated Butterfly Valves Wafer style
Wafer style Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance. Features General application
More informationHygienic Butterfly Valve VZFA Product range overview
Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /
More informationISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationCHECK valve SPECIFICATION. glt valves CHECK VALVE APPLICATION MANUFACTURING STANDARDS
CECK VAVE APPICATION SPECIFICATION Sometimes referre to as non-return valve, check valves prevents back-flow, constantly keeping flow in one irection. Check valve are esigne to close quickly an automatically
More informationM21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
More informationKeystone CompoSeal Resilient Seated Butterfly Valves Wafer style Sizes DN PN 10/16
Wafer style Sizes DN -3 PN /1 Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance. Features Patented
More informationKeystone CompoSeal Resilient Seated Butterfly Valves Wafer style
Wafer style Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance Features General application Since
More informationSTAINLESS STEEL 16 GAUGE MULTI-STATION HAND SINKS W/ TUBULAR SUPPORTS or LEGS. Electronic Faucet. FC-WM-40KV Shown
STAINESS STEE GAUGE MUTI-STATION HAND SINKS W/ TUBUAR SUPPORTS or EGS NSF APPROVED Item #: Qty #: Model #: Project #: Electronic Faucet Manual Operated (Faucet Not Included) F-WM-40EF Shown Toe-Push F-WM-40FV
More informationBall Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661)
3451 Pegasus Drive Bakersfield, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com DHV Valve Company
More informationMaterials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 Between flanges PN10/16-10 C +80 C in NBR, 110 C in EPDM, 180 C in FKM Max Pressure : 16 Bars up to DN200 ( 10 bars over ) Specifications
More informationBERMAD Irrigation. Technical Specifications. WW-700 & 800 Series Metric. 800 Metric
Tecnical Specifications -700 & 0 Series SI 700 Metric SI 0 Metric Available Sizes & Patterns DN - DN 0 - Y Pattern DN - DN 4 - Angle DN 600 - DN 0 - Globe Connection Standard Flanged: ISO 7005-2 (ISO,
More informationTECAPRES TPSR / TPSRC SERIES. Cylinders with slow-speed return. ØBody mm. Fa dan. Strokes mm. Code SLOW RELEASE TPSR TPSRS TPNS
/ C SERIES SLOW RELEASE S TNS STO CYLINDER HOT ORMING THT TSL Cynders wth ØBody Strokes 750 50 1-125 750 1500 75 1-125 1500 000 95 25-125 000 5000 120 25-125 5000 C 750 50 160-00 750 C 1500 75 160-00 1500
More informationInteract Overhead Power
Interact Overhead Power 75 range introduction feature benefits Interact Overhead Power System is a powertrack catering for singe, 3 phase or dua circuit appications suitabe for standard, permanent ive,
More informationPSI RUBBER STEEL FLANGE GASKETS
PSI RUBBER STEEL FLANGE GASKETS HIGH OPERATIONAL SAFETY AND MAINTANANCE FREE HIGH RESILIENCE COMPENSATES PRESSURE CHANGES AND VARIATIONS IN TEMPERATURE LEAKPROOF FOR MANY FLANGE SURFACES WWW.PSI-PRODUCTS.COM
More informationEPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life
EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing
More informationHeavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36
Heavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36 H With a 34.5% thicker wall than SDR 35 and high impact retention ring. Royal Building Product's PVC Heavy
More informationFlat fan nozzles. Nozzle characteristics
Fat fan nozzes Bet ceaning Coating Steam ceaning Degreasing High pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning ceaning
More informationpride that AIMCO can say the products that we manufacture are MADE IN THE USA.
AIMCO For over 40 years AIMCO has been working with manufacturers around the world, we are the complete global source for all assembly, fastening, and critical bolting needs. AIMCO can effectively and
More informationPoly16 Plus Compression Fittings Technical information
1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut: polypropylene copolymer stabilize (PP-B) with Master Batches
More informationBelt Scales Milltronics belt scales
Ovrvw s a mouar sgn, mum- to avy-uty bt sca for procss ncaton. Ir not ncu wt bt sca. Bnfts Unqu mouar sgn mp nstaaton Low cost Easy rtroft Appcaton oprats wt proucts k aggrgats, san, or mnras, provng contnuous
More informationS and SF Series Cast Iron Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationTOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
More informationTechnical handbook Compression Fittings and Clamp Saddles
Technical hanbook 2009 Compression Fittings an Clamp Sales 1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut:
More informationNew range OPCT Pathologictm Sport specific Multisport
New range OPCT Pathologc tm Sport specfc Multsport www.podatech.com Pathologc tm Talalga Man of M model Woman of M model Pad suppled separately Pad suppled separately Podamc 125 MP Brown 2,5 mm EMF Black
More informationGStype/HGStype/WGStype
Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing
More informationC-Line Linear guide system
www.bergab.ru adea S.r.. adea GmbH Via Meette, 16 20128 Miano Te. +39 02.27.093.297 Fax +39 02.25.51.768 Internet: www.nadea.it E-Mai: customer.service@nadea.it Rudof-Diese-Straße 28 71154 ufringen Te.
More informationAny switch configuration
Series L2 Rotary Cam es Attractive design, reiabe operation and high quaity for any appication up to 25 Amps TIP! Sprecher + Schuh s comprehensive ine of L2 rotary cam switches are avaiabe for a contro
More informationButterfly Valve ISORIA 25. Centred-disc Butterfly Valve AMRING Elastomer Liner DN PS 25 bar. Type Series Booklet
Butterfly Valve ISORIA 25 Centred-disc Butterfly Valve AMRING Elastomer Liner DN 32-1000 PS 25 bar Type Series Booklet Legal information/copyright Type Series Booklet ISORIA 25 Original operating manual
More informationMINIMESS Test Points
MINIMESS -1 Test Ponts +3 mm Metal wth ant vbraton O-rng Plastc Vbraton Proof Torque n Nm Techncal data Materal: Free cuttng steel 1.071 Metal Materal: Free cuttng steel 1.071 Plastc Materal: Stanless
More informationM21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationUniting business - one person at a time BALL LINEAR GUIDES FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS
Uniting business - one person at a time A IAR UIDS OR COMMRCIA AD IDUSTRIA APPICATIOS ORDRI IORMATIO inear uide wit was-down coating eatures of AA a inear uides: Interna ubrication for onger ife Size intercangeabe
More informationCast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
More informationPRODUCT EVOLUTION. Be careful, our valves Ref.730 are changing
PRODUCT EVOLUTION Be careful, our valves Ref.730 are changing We currently have 2 different types available (according to DN) with different dimensions (but same face to face) and non-commutable gaskets
More informationPipe Fittings. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION I ITTINGS SD's recision pipe fittings are designed and manufactured to very stringent tolerances under rigid quality control procedures, to provide
More informationSeries M Helical In Line Technical Up to 90 kw/11,000 Nm Geared Motors
www.pbl.co.n Seres Helcal In Lne Techncal Up to 90 kw/11,000 Geared otors SERIES PRODUCTS IN THE RANGE Servng an entre spectrum of mechancal drve applcatons from food, energy, mnng and metal; to automotve,
More informationMK508UBS Series. Back Pressure Regulator MK508UBS. Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction.
MK508UBS Series Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction The MK508UBS Series are spring loaded, direct-operated, pressure relief valves used downstream of pressure
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More informationMaterials : Carbon steel or Stainless steel
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 Between flanges PN10/16-10 C +80 C in NBR, 110 C in EPDM, 180 C in FKM Max Pressure : 16 Bars up to DN200 ( 10 bars over )
More informationTechnology in full flow
Technology in full flow I V V H T nspired by the mission of offering worldclass solutions in the area of Flow Control, a group of experienced engineers with decades of cumulative experience in design and
More informationStainless steel ASTM A351 CF8M
MADE OF STAINLESS... Certificate 3.1 Size : Connection end : Min Temperature : Max Temperature : DN 25 to 150 Flanges PN16 R.F. - 30 C + 150 C Max Pressure : 16 Bars Specifications : ISO mounting pad filled
More informationPIPE SYSTEM TECHNICAL DATA
PIPE SYSTEM TECHNICA DATA Information The Alvenius standard product range is approved according to PED 97/23/EC. The PED approval has been integrated with the certified Quality Management System. t Outside
More informationSERIES M CONTENTS
C-3.01INP0316 SERIES CONTENTS General Descrpton Unt Desgnaton Explanaton And Use Of Ratngs And Servce s Classfcaton By Applcatons Selecton Procedure For otorsed Unts Unt Versons Shaft Optons otor Adaptors
More informationMTC K - CXX - X - E - XX
MTC Inductors - Radal type Applcaton Feld TVs and audo Telecommuncatons devce. Swtchng Power Supples. Buzzers and Alarm systems Other nose flters. Characterstcs: Inductance range : 1.0uH to 10000uH Current
More information