CAST BODY WEDGE GATE VALVES

Size: px
Start display at page:

Download "CAST BODY WEDGE GATE VALVES"

Transcription

1 CAST BODY WEDGE GATE VAVES FIG , STAINESS STEE - CASS 150 D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. TFE impregnated packing for temperature to 450 o F/232 o C and P Precision machined flexible wedge gate and seat for light shut-off. Fully guided gate to ensure alignment. Outside screw and yoke, non-rising handwheel, rising stem. Two piece yoke and bonnet assembly. Flanges match ASME B bs standard. Serrated gasket faces. Face to face ASME B16.10 Designed to ASME B16.34 & API 603 tested to API 598 D esigned to handle corrosive fluids in the process industries FOW CONTRO

2 FOW CONTRO STAINESS STEE WEDGE GATE VAVES FIG , STAINESS STEE - CASS 150 FIG 20B-150-CF8M (316) FIG CG8M (31) Item Description Fig. 20B Fig Body 2 Disc C 3 Nut AISI 304 AISI Bonnet-Bolt AISI 304 AISI Packing TFE Impregnated TFE Impregnated Gland Flange Gland ASTM A49 Gr.316 ASTM A49 Gr.31 8 Yoke Gr.CF8 Gr.CF Stem Sleeve SAE 660 (Bronze) SAE 660 (Bronze) 10 andwheel ASTM A536 Gr andwheel Nut MS Plated Steel D (OPEN) Stem ASTM A49 Gr.316 ASTM A49 Gr Yoke Bolt AISI 304 AISI Nut AISI 304 AISI Bonnet 16 Gasket P.T.F.E. P.T.F.E. 1 Gland Bolt Pin AISI 304 AISI Gland Bolt AISI 304 AISI Gland Bolt Nut AISI 304 Nylock AISI 304 Nylock B 20 Sleeve Retainer AISI 304 AISI Nameplate ASTM A240 Gr.304 ASTM A240 Gr Rivets Aluminium Aluminium 23 ock Screw SS-Commercial Grade SS SS-Commercial Grade 24 Grease Nipple Cadmium Plated Steel Cadmium Plated Steel A DIMENSIONS - INCES Size A B C D Wt. lb DIMENSIONS - MIIMETERS Size A B C D andwheel actuator standard. Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. Also available in larger sizes, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. Wt. Kg SURREY, BC P: F: surrey@mastewart.com EDMONTON, AB P: F: edmonton@mastewart.com AJAX, ON P: F: ajax@mastewart.com MONTREA, QC P: F: montreal@mastewart.com 2/16/

3 CAST BODY WEDGE GATE VAVES FIG , STAINESS STEE - CASS 300 D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. TFE impregnated packing for temperature to 450 F/232 C and P Precision machined flexible wedge gate and seat for light shut-off. Fully guided gate to ensure alignment. Outside screw and yoke, non-rising handwheel, rising stem. Two piece yoke and bonnet assembly. Flanges match ASME B bs standard. Serrated gasket faces. Face to face ASME B16.10 Designed to ASME B16.34 & API 603 tested to API 598 D esigned to handle corrosive fluids in the process industries FOW CONTRO

4 FOW CONTRO STAINESS STEE WEDGE GATE VAVES FIG , STAINESS STEE - CASS 300 FIG 20B - CF8M (316) FIG 20 - CG8M (31) Item Description Fig. 20B Fig Body 2 Disc C 3 Nut AISI 304 AISI Bonnet-Bolt AISI 304 AISI Packing TFE Impregnated TFE Impregnated Gland Flange Gland ASTM A49 Gr.316 ASTM A49 Gr.31 8 Yoke Gr.CF8 Gr.CF Stem Sleeve SAE 660 (Bronze) SAE 660 (Bronze) 10 andwheel Ductile Iron Ductile Iron andwheel Nut AISI 304 D (OPEN) Stem ASTM A49 Gr.316 ASTM A49 Gr Yoke Bolt AISI 304 AISI Nut AISI 304 AISI Bonnet 16 Gasket S.W.316+PTFE S.W.316+PTFE 1 Gland Bolt Pin AISI 304 AISI Gland Bolt AISI 304 AISI Gland Bolt Nut AISI 304 Nylock AISI 304 Nylock B 20 Sleeve Retainer AISI 304 AISI Nameplate ASTM A240 Gr.304 ASTM A240 Gr Rivets Aluminium Aluminium 23 ock Screw SS-Commercial Grade SS-Commercial Grade 24 Grease Nipple Cadmium Plated Steel Cadmium Plated Steel A DIMENSIONS - INCES Size A B C D Wt. lb DIMENSIONS - METRIC Size A B C D andwheel actuator standard. Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. s also available in larger sizes or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. Wt. kg SURREY, BC P: F: surrey@mastewart.com EDMONTON, AB P: F: edmonton@mastewart.com AJAX, ON P: F: ajax@mastewart.com MONTREA, QC P: F: montreal@mastewart.com 2/16/

5 STAINESS STEE TITING DISK CECK VAVES FIG. 40, A CAST S.S. CONSTRUCTION Design Features Cast corrosion resistant stainless steel Availability; 2 1/2" thru 12" (14" thru 24" POA) Precision machined tilting disc and seat for tight shut-off in reverse flow direction. D esigned to handle corrosive fluids in the process industries Designed with off center pivot to avoid the tendency of the disc to slam on the seat and to aid the operation at low pressure differentials. Blow out proof gaskets. Can be installed in both the horizontal or vertical positions provided fluid flow is upward. 150 PSI Maximum working pressure. Rugged construction FOW CONTRO Flanges meet ASME B class bolt pattern and serrated flange gasket faces

6 FOW CONTRO STAINESS STEE TITING DISC CECK VAVES FIG 40A-CF8 (304 SS) FIG 40B-CF8M (316 SS) FIG 40-CG8M (31 SS) FIG 40SMO-CK3MCUN Item Part 40A 40B 40 40SMO Body Gr.CF8 2 Seat Gr.CF8 CK3McuN CK3McuN 3 Disc Gr.CF8 CK3McuN D1 D C Pin ASTM A49 Gr.31 ASTM A49 Gr Bolts AISI Nuts AISI 304 ASTM A49 Gr SMO (UNS31254) 1 Gasket PTFE n h 8 NPT Plug AISI SMO (UNS31254) Also available in special alloys such as CNM (Alloy 20), Duplex SS, astelloy on request. SIZE D C n h D1 Wt. lb./kgs DIMENSIONS (INCES/MIIMETERS) SURREY, BC P: F: surrey@mastewart.com EDMONTON, AB P: F: edmonton@mastewart.com AJAX, ON P: F: ajax@mastewart.com MONTREA, QC P: F: montreal@mastewart.com CAROTTE, NC P: F: ONG BEAC, CA P: F: BAKERSFIED, CA P: F: REV

7 CAST BODY SWING CECK VAVES FIG , STAINESS STEE - CASS 150 FIG , STAINESS STEE - CASS 300 D e s i g n F e a t u r e s Bolted cover. Precision machined disc and seat for tight D esigned to handle corrosive fluids in the process industries shut off in reverse flow direction. Teflon cover gasket for temperature to 450 F/232 C. Flanges match ASME B & 300 lbs. standards. Serrated gasket faces. Face to Face ASME B Designed to ASME B16.34, Tested to API 598 FOW CONTRO

8 FOW CONTRO STAINESS STEE - ORIZONTA SWING CECK VAVES 150/300 B FIG 45B-150-CF8M (316 SS) FIG CG8M (31 SS) FIG 45B-300-CF8M (316 SS) FIG CG8M (31 SS) 13 Item Part Fig. 45B Fig Body 2 Cover Disc 4 inge 5 Pin ASTM A49 Gr.316 ASTM A49 Gr.31 6 Plug AISI 316 AISI 31 Disc Nut AISI 316 AISI Washer AISI 316 AISI 31 9 Split Pin AISI 316 AISI Studs AISI 304 AISI Nuts AISI 304 AISI Gasket P.T.F.E P.T.F.E 13 EyeBolt ASTM A36 ASTM A36 DIMENSIONS - INCES FF () T () Wt. (lb) Also available in special alloys such as CNm (Alloy 20), Duplex SS, astelloy on request FF () T () Wt. (lb) DIMENSIONS - MIIMETERS F.F () T () Wt. (lb) F.F () T () Wt. (kg) SURREY, BC P: F: surrey@mastewart.com EDMONTON, AB P: F: edmonton@mastewart.com AJAX, ON P: F: ajax@mastewart.com MONTREA, QC P: F: montreal@mastewart.com 2/26/

9 INSTRUMENT ISOATING VAVE FIG. 50B (CF8M) WAFER STYE UGGED BA VAVE FIG. 50 (CG3M) WAFER STYE UGGED BA VAVE D e s i g n F e a t u r e s Investment cast stainless steel Transmitter isolating valve drilled to replace Designed to handle corrosive fluids in the process industries. either existing K.G.V. s or standard 150 drilling for new installations Glass filled teflon Seats 800 W.O.G. Rating - quarter turn actuation - only 2 between vessel flange and transmitter flange Face purge connection direct to transmitter side Body purge connection direct to ball cavity FOW CONTRO which is vented to tank side by three 1/8 holes

10 FOW CONTRO 2 Slots 3/4 Wide on a 6 BCD N A M E / M A T E R I A 1. Body / Cast Stainless Steel 2. Ball / Stainless Steel 3. Retainer Gasket / Teflon 4. Seat / RTFE Retainer / Stainless Steel 6. Packing / Teflon. Gland Nut 9/ Stainless Steel 8. Stem / Stainless Steel 9. 1/4 NPT 1/4 Plug NPT / Face Stainless Purge Steel Connection 10. ockout Pin / Stainless Steel 11. Name Plate / Stainless Steel 2 oles Drilled 3/4 Ø on a 6 BCD Ø Ø 1 15 / /64 1 Ø 2 3 /4 Ø 5 3 /4 4 3 / /4 PT Body Purge Connection Shown in Closed Position 2 oles Drilled & Tapped 5/8 UNC on a 6 BCD 11 2 Slots 3/4 Wide on a 6 BCD /4 NPT Face Purge Connection 2 oles Drilled 3/4 Ø on a 6 BCD Ø /16 13/32 INSTAATION INSTRUCTIONS 6 FIG. 1 Stud Bolt Orientation For standard 3 150# Flange mounted level transmitter & FCC isolation valve Notes: 1. FCC s in this configuration will require the two tapped holes to be drilled out. 2. Tank Pad Thickness depends on Vessel Diameter or Wall (shell) Thickness. 1 /2" 6" 3" 1 1 /4" 1 15 /16" 1 1 /2" Transmitter 304 SS Studs 5 1 /2" ong Vertical Axis Vertical Axis /2" 1 /2" 6" 6" 3" 3" Tank Flange FIG. 2 Stud Bolt Orientation Serrated Face For replacement of Knife Gate s 304 SS Studs 2 3 /4" long 304 SS Cap Screws 3 1 /2" long Vertical Axis Vertical Axis Notes: Vertical Axis 1. FCC s will fit both Fig. 1 & Fig. 2 (Fig. 1 preferred orientation) 2. 5/8 ø Studs A & Nuts to be supplied by A Contractor installing the equipment. 3. All dimensions 45 are typical. Studs 45 are to be cut to length as required. 4. 1/16 Gaskets to be supplied by Contractor. 5. Weight: 10.5 lbs. 1 /2" 6" 3" Transmitter 304 SS Studs 5 1 /2" ong A A A A /2" 1 /2" 6" 6" 3" 3" 1 1 /4" 1 15 /16" 1 1 /2" SURREY, BC P: F: surrey@mastewart.com EDMONTON, AB P: F: edmonton@mastewart.com AJAX, ON P: F: ajax@mastewart.com MONTREA, QC P: F: montreal@mastewart.com 2/16/

11 INVESTMENT CAST 316 S.S. SAMPING VAVE FIG. NO. 51B (CF8M) RESIIENT SEAT - EVER OPERATED D e s i g n F e a t u r e s Cast in corrision resistant stainless steel. 2 NPT X 1 1/2 outlet Designed with all wetted parts of 316SS Designed to handle corrosive fluids in the process industries. (CF8M) and a viton resilient seat for positive shut-off. ever operated Designed for installation in pipe lines or tanks where an occasional sample is required. 150 PSI Maximum working pressure. FOW CONTRO

12 FOW CONTRO INVESTMENT CAST 316 STAINESS STEE SAMPING VAVES Size 2 NPT x 1 1 /2 Outlet Thread Flow Viton Seat W D outlet DIMENSIONS (UNIT: INC/MM) DIMENSIONS Size D TD W Y Weight 2 in NPT BS 51 mm 38 2 NPT KGS SURREY, BC P: F: surrey@mastewart.com EDMONTON, AB P: F: edmonton@mastewart.com AJAX, ON P: F: ajax@mastewart.com MONTREA, QC P: F: montreal@mastewart.com 2/16/

13 CAST BODY KNIFE GATE VAVES FIG. 3, STAINESS STEE WIT D.I. TOPWORKS - FU PORT - META TO META SEAT D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. eavy gate with wide spaced clevis. Wiper ring in stuffing box assists sealing during both operating and static conditions. rated for F (OC-66C) Full port one piece cast body with integral cast 210 back-up ring and self cleaning seat pocket. Full lug pattern. Drilled and tapped to class 150 flanges. Easy bolt on conversion to actuator or bevel gear operator. Designed and tested to conform to MSS-SP81 and TAPPI TIS specifications. D esigned to handle dense mixtures of stock and slurries. The shearing action of the knife gate cuts through solids and cleans the seat as it closes. FOW CONTRO

14 FOW CONTRO STAINESS STEE KNIFE GATE VAVES FIG. 3, STAINESS STEE - FU PORT - META TO META SEAT FIG 3B - CF8M (316) FIG 3 - CG8M (31) G (COSED) 8 12 M (OPEN) FOR 16 TO 24 TOP WORKS DETAI andwheel actuator standard. 1 AØ BØ CØ 24 (D) BCØ Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. 1/16 K s 30" and larger, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. J (E) NO. OF OES (F) DIAMETER Size DIMENSIONS - INCES A B C D E F G h J K M Size DIMENSIONS - MIIMETERS A B C D E F G h J K M Weight lbs Weight Kg Item Description 3B 3 1 Body 2 Gate ASTM A240 Gr.316 ASTM A240 Gr.31 3 Packing 134 AF PAMETTO 4 Gland Bolts Cadmium Plated Steel 5 Gland 6 Gland Nuts Cadmium Plated Steel Nylock Sleeve ousing Bolts Cadmium Plated Steel 8 Stem Sleeve SAE 660 (Bronze) 9 Sleeve ousing A536 Gr andwheel A536 Gr andwheel Nut Cadmium Plated Steel 12 Stem ASTM A49 Gr Nut ocking Screw SS-Commercial Grade (BSW) 14 Grease Nipple Cadmium Plated Steel 15 Clevis Nuts Cadmium Plated Steel Nylock 16 Clevis Bolts Cadmium Plated Steel 1 Clevis Gr.CF8 18 Yoke A536 Gr Nameplate ASTM A240 Gr andwheel Key Mild Steel 21 Thrust Bearing SKF 5112 (Ball Bearing) 22 Rivets Aluminium 23 Wiper Ring ycar 0 24 Yoke Bolts Cadmium Plated Steel 25 Yoke Nuts Cadmium Plated Steel Nylock 26 ousing Nuts Cadmium Plated Steel Nylock SURREY, BC P: F: surrey@mastewart.com EDMONTON, AB P: F: edmonton@mastewart.com AJAX, ON P: F: ajax@mastewart.com MONTREA, QC P: F: montreal@mastewart.com 2/16/11-3.8

15 CAST BODY KNIFE GATE VAVES FIG. 3, STAINESS STEE WIT D.I. TOPWORKS - FU PORT - UNI-DIRECTIONA META TO META SEAT D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. eavy gate with wide spaced clevis. Wiper ring in stuffing box assists sealing during both operating and static conditions. rated for F (OC-66C) Full port one piece cast body with integral cast 210 back-up ring and self cleaning seat pocket. Full lug pattern. Drilled and tapped to class 150 flanges. Easy bolt on conversion to actuator or bevel gear operator. Designed and tested to conform to MSS-SP81 and TAPPI TIS specifications. D esigned to handle dense mixtures of stock and slurries. The shearing action of the knife gate cuts through solids and cleans the seat as it closes. FOW CONTRO

16 FOW CONTRO STAINESS STEE KNIFE GATE VAVES FIG. 3, STAINESS STEE FU PORT UNI-DIRECTIONA META TO META SEAT FIG 3B - CF8M (316) FIG 3 - CG8M (31) G (COSED) 8 12 M (OPEN) FOR 16 TO 24 TOP WORKS DETAI andwheel actuator standard. 1 AØ BØ CØ 24 (D) BCØ Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. 1/16 K s 30" and larger, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. J (E) NO. OF OES (F) DIAMETER Size DIMENSIONS - INCES A B C D E F G h J K M Size DIMENSIONS - MIIMETERS A B C D E F G h J K M Weight lbs Weight Kg Item Description 3B 3 1 Body 2 Gate ASTM A240 Gr.316 ASTM A240 Gr.31 3 Packing 134 AF PAMETTO 4 Gland Bolts Cadmium Plated Steel 5 Gland 6 Gland Nuts Cadmium Plated Steel Nylock Sleeve ousing Bolts Cadmium Plated Steel 8 Stem Sleeve SAE 660 (Bronze) 9 Sleeve ousing A536 Gr andwheel A536 Gr andwheel Nut Cadmium Plated Steel 12 Stem ASTM A49 Gr Nut ocking Screw SS-Commercial Grade (BSW) 14 Grease Nipple Cadmium Plated Steel 15 Clevis Nuts Cadmium Plated Steel Nylock 16 Clevis Bolts Cadmium Plated Steel 1 Clevis Gr.CF8 18 Yoke A536 Gr Nameplate ASTM A240 Gr andwheel Key Mild Steel 21 Thrust Bearing SKF 5112 (Ball Bearing) 22 Rivets Aluminium 23 Wiper Ring ycar 0 24 Yoke Bolts Cadmium Plated Steel 25 Yoke Nuts Cadmium Plated Steel Nylock 26 ousing Nuts Cadmium Plated Steel Nylock SURREY, BC P: F: surrey@mastewart.com EDMONTON, AB P: F: edmonton@mastewart.com AJAX, ON P: F: ajax@mastewart.com MONTREA, QC P: F: montreal@mastewart.com 10/24/11-3.9

17 CAST BODY KNIFE GATE VAVES FIG. 4, STAINESS STEE WIT D.I. TOPWORKS - FU PORT - RESIIENT SEAT D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. eavy gate with wide spaced clevis. Wiper ring in stuffing box assists sealing during both operating and static conditions. rated for F (OC-66C) Full port one piece cast body with integral resilient seat. Drip tight shut-off in both directions (Bi-directional) Full lug pattern. Drilled and tapped to class 150 flanges. Easy bolt-on conversion to actuator or bevel gear operator. Designed and tested to conform to MSS-SP81 and TAPPI TIS specifications. D esigned for shut-off on light consistency stock, white water or clear liquids. FOW CONTRO

18 FOW CONTRO STAINESS STEE KNIFE GATE VAVES FIG. 4, STAINESS STEE - FU PORT - RESIIENT SEAT G FIG 4B - CF8M (316) FIG 4 - CG8M (31) (COSED) 15 5 M (OPEN) FOR TO 24 TOP WORKS 24 DETAI TOP WORKS DETAI 16 6 Optional seat: YCAR (BUNA N or NITRIE) ØA ØB (RF) ØC andwheel actuator standard. Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. 28 1/16 J K D(BCD) (E) NO. OF OES (F) DIAMETER s 30 and larger, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. Size DIMENSIONS - INCES A B C D E F G h J K M Size DIMENSIONS - MIIMETERS A B C D E F G h J K M Weight lbs Weight Kg Item Description 4B 4 1 Body 2 Gate ASTM A240 Gr.316 ASTM A240 Gr.31 3 Packing 134 AF PAMETTO 4 Gland Bolts Cadmium Plated Steel 5 Gland 6 Gland Nuts Cadmium Plated Steel Nylock Sleeve ousing Bolts Cadmium Plated Steel 8 Stem Sleeve SAE 660 (Bronze) 9 Sleeve ousing ASTM A536 Gr andwheel ASTM A536 Gr andwheel Nut Cadmium Plated Steel 12 Stem ASTM A49 Gr.SS Nut ocking Screw SS-Commercial Grade (BSW) 14 Grease Nipple Cadmium Plated Steel 15 Clevis Nuts Cadmium Plated Steel Nylock 16 Clevis Bolts Cadmium Plated Steel 1 Clevis Gr.CF8 18 Yoke ASTM A536 Gr Nameplate ASTM A49 Gr andwheel Key Mild Steel 21 Thrust Bearing SKF (Ball Bearing) 22 Rivets Aluminium 23 Wiper Ring Viton 0 24 Yoke Bolts Cadmium Plated Steel 25 Yoke Nuts Cadmium Plated Steel Nylock 26 ousing Nuts Cadmium Plated Steel Nylock 2 Resilient Seat Viton 0 28 Reinforcing Wire ASTM A49 Gr.SS Adjusting Nut ISO 3506 Gr.A ock Nut Cadmium Plated Steel SURREY, BC P: F: surrey@mastewart.com EDMONTON, AB P: F: edmonton@mastewart.com AJAX, ON P: F: ajax@mastewart.com MONTREA, QC P: F: montreal@mastewart.com 2/16/11-4.

19 CAST BODY KNIFE GATE VAVES FIG. 4, STAINESS STEE WIT D.I. TOPWORKS - FU PORT - BI-DIRECTIONA RESIIENT SEAT D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. eavy gate with wide spaced clevis. Wiper ring in stuffing box assists sealing during both operating and static conditions. rated for F (OC-66C) Full port one piece cast body with integral resilient seat. Drip tight shut-off in both directions (Bi-directional) Full lug pattern. Drilled and tapped to class 150 flanges. Easy bolt-on conversion to actuator or bevel gear operator. Designed and tested to conform to MSS-SP81 and TAPPI TIS specifications. D esigned for shut-off on light consistency stock, white water or clear liquids. FOW CONTRO

20 FOW CONTRO STAINESS STEE KNIFE GATE VAVES FIG. 4, STAINESS STEE - FU PORT - BI-DIRECTIONA RESIIENT SEAT G FIG 4B - CF8M (316) FIG 4 - CG8M (31) (COSED) 15 5 M (OPEN) FOR TO 24 TOP WORKS 24 DETAI TOP WORKS DETAI 16 6 Optional seat: YCAR (BUNA N or NITRIE) ØA ØB (RF) ØC andwheel actuator standard. Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. 28 1/16 J K D(BCD) (E) NO. OF OES (F) DIAMETER s 30 and larger, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. Size DIMENSIONS - INCES A B C D E F G h J K M Size DIMENSIONS - MIIMETERS A B C D E F G h J K M Weight lbs Weight Kg Item Description 4B 4 1 Body 2 Gate ASTM A240 Gr.316 ASTM A240 Gr.31 3 Packing 134 AF PAMETTO 4 Gland Bolts Cadmium Plated Steel 5 Gland 6 Gland Nuts Cadmium Plated Steel Nylock Sleeve ousing Bolts Cadmium Plated Steel 8 Stem Sleeve SAE 660 (Bronze) 9 Sleeve ousing ASTM A536 Gr andwheel ASTM A536 Gr andwheel Nut Cadmium Plated Steel 12 Stem ASTM A49 Gr.SS Nut ocking Screw SS-Commercial Grade (BSW) 14 Grease Nipple Cadmium Plated Steel 15 Clevis Nuts Cadmium Plated Steel Nylock 16 Clevis Bolts Cadmium Plated Steel 1 Clevis Gr.CF8 18 Yoke ASTM A536 Gr Nameplate ASTM A49 Gr andwheel Key Mild Steel 21 Thrust Bearing SKF (Ball Bearing) 22 Rivets Aluminium 23 Wiper Ring Viton 0 24 Yoke Bolts Cadmium Plated Steel 25 Yoke Nuts Cadmium Plated Steel Nylock 26 ousing Nuts Cadmium Plated Steel Nylock 2 Resilient Seat Viton 0 28 Reinforcing Wire ASTM A49 Gr.SS Adjusting Nut ISO 3506 Gr.A ock Nut Cadmium Plated Steel SURREY, BC P: F: surrey@mastewart.com EDMONTON, AB P: F: edmonton@mastewart.com AJAX, ON P: F: ajax@mastewart.com MONTREA, QC P: F: montreal@mastewart.com 10/24/11-4.8

21 CAST BODY KNIFE GATE VAVES FIG. 83, A STAINESS STEE - FU PORT - META TO META SEAT D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. eavy gate with wide spaced clevis. Wiper ring in stuffing box assists sealing during both operating and static conditions. rated for F (OC-66C) Full port one piece cast body with integral cast 210 back-up ring and self cleaning seat pocket. Full lug pattern. Drilled and tapped to class 150 flanges. Easy bolt on conversion to actuator or bevel gear operator. Designed and tested to conform to MSS-SP81 and TAPPI TIS specifications. D esigned to handle dense mixtures of stock and slurries. The shearing action of the knife gate cuts through solids and cleans the seat as it closes. FOW CONTRO

22 FOW CONTRO STAINESS STEE KNIFE GATE VAVES FIG. 83, STAINESS STEE - FU PORT - META TO META SEAT FIG 83B - CF8M (316) FIG 83 - CG8M (31) G (COSED) M (OPEN) FOR 16 TO 24 TOP WORKS DETAI 15 5 (D) BCØ 6 andwheel actuator standard. AØ BØ CØ Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. 1/16 J K (E) NO. OF OES (F) DIAMETER s 30 and larger, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. Size DIMENSIONS - INCES A B C D E F G h J K M Size DIMENSIONS - MIIMETERS A B C D E F G h J K M Weight lbs Weight Kg Item Description 83B 83 1 Body 2 Gate ASTM A240 Gr.316 ASTM A240 Gr.31 3 Packing 134 AF PAMETTO 4 Gland Bolts ISO 3506 Gr.A2-0 5 Gland 6 Gland Nuts ISO 3506 Gr.A2-0 Nylock Sleeve ousing Bolts ISO 3506 Gr.A2-0 8 Stem Sleeve SAE 660 (Bronze) 9 Sleeve ousing Gr.CF8 10 andwheel ASTM A536 Gr andwheel Nut Cadmium Plated Steel 12 Stem ASTM A49 Gr Nut ocking Screw SS Commercial Grade (BSW) 14 Grease Nipple Cadmium Plated Steel 15 Clevis Nuts ISO 3506 Gr.A2-0 Nylock 16 Clevis Bolts ISO 3506 Gr.A2-0 1 Clevis Gr.CF8 18 Yoke Gr.CF8 19 Nameplate Gr andwheel Key Mild Steel 21 Thrust Bearing SKF (Ball Bearing) 22 Rivets Aluminium 23 Wiper Ring ycar 0 24 Yoke Bolts ISO 3506 Gr.A Yoke Nuts ISO 3506 Gr.A2-0 Nylock 26 ousing Nuts ISO 3506 Gr.A2-0 Nylock SURREY, BC P: F: surrey@mastewart.com EDMONTON, AB P: F: edmonton@mastewart.com AJAX, ON P: F: ajax@mastewart.com MONTREA, QC P: F: montreal@mastewart.com 2/16/

23 CAST BODY KNIFE GATE VAVES FIG. 84, STAINESS STEE - FU PORT - RESIIENT SEAT D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. eavy gate with wide spaced clevis. Wiper ring in stuffing box assists sealing during both operating and static conditions. rated for F (OC-66C) Full port one piece cast body with integral resilient seat. Drip tight shut-off in both directions (Bi-directional). Full lug pattern. Drilled and tapped to class 150 flanges. Easy bolt-on conversion to actuator or bevel gear operator. Designed and tested to conform to MSS-SP81 and TAPPI TIS specifications. D esigned for shut-off on light consistency stock, white water or clear liquids. FOW CONTRO

24 FOW CONTRO STAINESS STEE KNIFE GATE VAVES FIG. 84, STAINESS STEE - FU PORT - RESIIENT SEAT G FIG 84B - CF8M (316) FIG 84 - CG8M (31) (COSED) M (OPEN) 26 FOR 16 TO 24 TOP WORKS DETAI FOR 16 TO 24 TOP WORKS DETAI ØA ØB (RF) ØC Optional seat: YCAR (BUNA N or NITRIE) andwheel actuator standard. Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. 28 1/16 J K D(BCD) (E) NO. OF OES (F) DIAMETER s 30 and larger, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. Size DIMENSIONS - INCES A B C D E F G h J K M Size DIMENSIONS - MIIMETERS A B C D E F G h J K M Weight lbs Weight Kg Item Description 84B 84 1 Body 2 Gate ASTM A240 Gr.316 ASTM A240 Gr.31 3 Packing 134 AF PAMETTO 4 Gland Bolts ISO 3506 Gr.A2-0 5 Gland 6 Gland Nuts ISO 3506 Gr.A2-0 Nylock Sleeve ousing Bolts ISO 3506 Gr.A2-0 8 Stem Sleeve SAE 660 (Bronze) 9 Sleeve ousing Gr.CF8 10 andwheel ASTM A536 Gr andwheel Nut Cadmium Plated Steel 12 Stem ASTM A49 Gr Nut ocking Screw SS-Commercial Grade (BSW) 14 Grease Nipple Cadmium Plated Steel 15 Clevis Nuts ISO 3506 Gr.A2-0 Nylock 16 Clevis Bolts ISO 3506 Gr.A2-0 1 Clevis Gr.CF8 18 Yoke Gr.CF8 19 Nameplate ASTM A240 Gr andwheel Key Mild Steel 21 Thrust Bearing SKF (Ball Bearing) 22 Rivets Aluminium 23 Wiper Ring Viton 0 24 Yoke Bolts ISO 3506 Gr.A Yoke Nuts ISO 3506 Gr.A2-0 Nylock 26 ousing Nuts ISO 3506 Gr.A2-0 Nylock 2 Resilient Seat Viton 0 28 Reinforce Wire (ss rod) ASTM A49 Gr Adjusting Nut ISO 3506 Gr.A ock Nut AISI 304 Nylock SURREY, BC P: F: surrey@mastewart.com EDMONTON, AB P: F: edmonton@mastewart.com AJAX, ON P: F: ajax@mastewart.com MONTREA, QC P: F: montreal@mastewart.com 2/16/11-84.

25 CAST BODY KNIFE GATE VAVES FIG. 84, STAINESS STEE - FU PORT - BI-DIRECTIONA RESIIENT SEAT D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. eavy gate with wide spaced clevis. Wiper ring in stuffing box assists sealing during both operating and static conditions. rated for F (OC-66C) Full port one piece cast body with integral resilient seat. Drip tight shut-off in both directions (Bi-directional). Full lug pattern. Drilled and tapped to class 150 flanges. Easy bolt-on conversion to actuator or bevel gear operator. Designed and tested to conform to MSS-SP81 and TAPPI TIS specifications. D esigned for shut-off on light consistency stock, white water or clear liquids. FOW CONTRO

26 FOW CONTRO STAINESS STEE KNIFE GATE VAVES FIG. 84, STAINESS STEE - FU PORT - BI-DIRECTIONA RESIIENT SEAT G FIG 84B - CF8M (316) FIG 84 - CG8M (31) (COSED) M (OPEN) 26 FOR 16 TO 24 TOP WORKS DETAI FOR 16 TO 24 TOP WORKS DETAI ØA ØB (RF) ØC Optional seat: YCAR (BUNA N or NITRIE) andwheel actuator standard. Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. 28 1/16 J K D(BCD) (E) NO. OF OES (F) DIAMETER s 30 and larger, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. Size DIMENSIONS - INCES A B C D E F G h J K M Size DIMENSIONS - MIIMETERS A B C D E F G h J K M Weight lbs Weight Kg Item Description 84B 84 1 Body 2 Gate ASTM A240 Gr.316 ASTM A240 Gr.31 3 Packing 134 AF PAMETTO 4 Gland Bolts ISO 3506 Gr.A2-0 5 Gland 6 Gland Nuts ISO 3506 Gr.A2-0 Nylock Sleeve ousing Bolts ISO 3506 Gr.A2-0 8 Stem Sleeve SAE 660 (Bronze) 9 Sleeve ousing Gr.CF8 10 andwheel ASTM A536 Gr andwheel Nut Cadmium Plated Steel 12 Stem ASTM A49 Gr Nut ocking Screw SS-Commercial Grade (BSW) 14 Grease Nipple Cadmium Plated Steel 15 Clevis Nuts ISO 3506 Gr.A2-0 Nylock 16 Clevis Bolts ISO 3506 Gr.A2-0 1 Clevis Gr.CF8 18 Yoke Gr.CF8 19 Nameplate ASTM A240 Gr andwheel Key Mild Steel 21 Thrust Bearing SKF (Ball Bearing) 22 Rivets Aluminium 23 Wiper Ring Viton 0 24 Yoke Bolts ISO 3506 Gr.A Yoke Nuts ISO 3506 Gr.A2-0 Nylock 26 ousing Nuts ISO 3506 Gr.A2-0 Nylock 2 Resilient Seat Viton 0 28 Reinforce Wire (ss rod) ASTM A49 Gr Adjusting Nut ISO 3506 Gr.A ock Nut AISI 304 Nylock SURREY, BC P: F: surrey@mastewart.com EDMONTON, AB P: F: edmonton@mastewart.com AJAX, ON P: F: ajax@mastewart.com MONTREA, QC P: F: montreal@mastewart.com 24/10/

27 CAST 316 STAINESS STEE VAVES FIG. 90B-200 SWING CECK VAVE (CF8M) FIG. 91B-200 WEDGE GATE VAVE (CF8M) FIG. 92B-200 GOBE VAVE (CF8M) D e s i g n F e a t u r e s 200 WOG/ F Rated Investment Cast Compact Design An economical choice to handle a variety of corrosive fluids. FOW CONTRO

28 FOW CONTRO CAST 316 STAINESS STEE VAVES PRESSURE TEMPERATURE RATING 200 WOG/ F FIG. 90B 200 N.P.T. or FIG. 90BSW Socket Weld P P A R T S / M A T E R I A 1. Cap / CF8M 2. Gasket / PTFE 3. inge Pin / Plug / Disc / CF8M 6. Body / CF8M DIMENSIONS 1 /2 3 / /4 1 1 / / P lbs/kg W FIG. 91B 200 N.P.T. Only (Non-Rising Stem) P (open) P A R T S / M A T E R I A 1. Name Plate / Aluminum 2. andwheel / FCD 3. Stem / Packing Nut / CF8 5. Gland / CF8M 6. Gland Packing / PTFE. Packing Box / Stem Washer / Bonnet / CF8M 10. Snap Ring / Body / CF8M 12. Disc / CF8M W P lbs/kg DIMENSIONS 1 /2 3 / /4 1 1 / W FIG. 92B 200 N.P.T. Only (Rising Stem) P N A M E / M A T E R I A 1. Name Plate / Aluminum 2. andwheel / FCD 3. Stem / Packing Nut / CF8M 5. Gland / CF8M 6. Gland Packing / PTFE. Packing Box / Stem Washer / Body / CF8M 10. Bonnet / CF8M 11. Disc / Snap Ring / 316 open close W P DIMENSIONS 1 /2 3 / /4 1 1 / lbs/kg SURREY, BC P: F: surrey@mastewart.com EDMONTON, AB P: F: edmonton@mastewart.com AJAX, ON P: F: ajax@mastewart.com MONTREA, QC P: F: montreal@mastewart.com 2/16/

29 CAST BODY KNIFE GATE VAVES ACTUATORS & ACCESSORIES TO SUIT A MODES OF FCC KNIFE GATE VAVES D e s i g n F e a t u r e s can be supplied with Actuator mounted at factory. Four-hole flange on top of yoke allows for easy bolt-on conversion in the field. Actuators include pneumatic, hydraulic, electric or bevel gear operators. Accessories can be mounted, including Solenoid s, imit Switches, Positioners and Speed Controls. Optional positive lock-out mechanism is available to lock gate in open or closed positions. Designed and tested to conform to MSS-SP81 and TAPPI TIS specifications. Actuated knife gate valve assemblies. Metal seated and resilient seated models designed to suit most service conditions. FOW CONTRO

30 STAINESS STEE KNIFE GATE VAVES DIMENSIONS FOR FCC KNIFE GATE VAVES WIT PNEUMATIC AIR CYINDER ACTUATORS FCC s Series 3, 83 - Metal Seat & Series 4, 84 - Resilient Seat Dimensions - Inches Cyl. Stroke Cylinder Weight (lb) Size Bore RDC Model A B C NPT D E ( & Cyl.) A PNEUMATIC ACTUATOR PNEUMATIC ACTUATOR E KK A C D B PAGE1NE /4 16 1/4 4 1 / PAE1NE /2 16 1/4 4 1 / PAE1NE /2 1 1/8 1/4 4 1/ PAGE1NE /4 18 3/8 1/4 4 1/ PAE1NE /2 18 3/8 1/4 4 1/ PAGE1NE /4 21 1/4 1/4 5 5/ PAE1NE /2 21 1/4 1/4 5 5/ PAKE1NE /2 21 3/8 1/4 5 5/ PAGE1NE /4 2 3/8 1/4 1/4 2 1/ PAE1NE /2 2 3/8 1/4 1/4 2 1/ PAKE1NE /2 2 1/2 1/4 1/4 2 1/ PAE1NE /2 2 1/2 1/4 1/4 2 1/ PAGE1NE /4 33 1/4 8 /8 2 3/ PAE1NE /2 33 1/4 8 /8 2 3/ PAKE1NE /2 33 1/8 1/4 8 /8 2 3/ PAE1NE /2 33 1/8 1/4 8 /8 2 3/ PAME1NE /2 33 3/4 3/8 8 /8 2 3/ PANE1NE /2 33 3/4 3/8 8 /8 2 3/ PAE1NE /2 39 1/8 1/4 10 5/8 2 3/ PAKE1NE /2 39 1/4 1/4 10 5/8 2 3/ PAE1NE /2 39 1/4 1/4 10 5/8 2 3/ PAME1NE /2 39 /8 3/8 10 5/8 2 3/ PANE1NE /2 39 /8 3/8 10 5/8 2 3/ PAPG9NE /8 41 5/8 3/8 10 5/8 2 3/ PAKE1NE /2 45 5/8 1/4 12 / PAE1NE /2 45 5/8 1/4 12 / PAME1NE /2 46 1/4 3/8 12 / PANE1NE /2 46 1/4 3/8 12 / PAPG9NE /8 48 3/8 12 / PARG9NE /4 48 1/2 12 / PAKE1NE /2 50 3/8 1/4 14 1/ PAE1NE /2 50 3/8 1/4 14 1/ PANE1NE /2 51 3/8 14 1/ PAPG9NE /8 52 3/4 3/8 14 1/ PARG9NE /4 52 3/4 1/2 14 1/ PASG9NE /4 53 1/2 1/2 14 1/ PAE1NE /2 56 3/4 1/4 16 5/8 3 1/ PANE1NE /2 5 3/8 3/8 16 5/8 3 1/ PAPG9NE /8 59 1/8 3/8 16 5/8 3 1/ PARG9NE /4 59 1/8 1/2 16 5/8 3 1/ PASG9NE /4 59 /8 1/2 16 5/8 3 1/ PAG9NE /2 62 1/2 1/4 18 5/8 3 1/ PANG9NE /2 63 1/8 3/8 18 5/8 3 1/ PARG9NE /4 64 /8 1/2 18 5/8 3 1/ PASG9NE /4 65 5/8 1/2 18 5/8 3 1/ PATJ9NE /8 1/2 18 5/8 3 1/ PANG9NE /2 69 1/2 3/8 20 1/4 4 1/ PAPG9NE /8 0 3/4 3/8 20 1/4 4 1/ PARG9NE /4 1 1/2 20 1/4 4 1/ PASG9NE /4 1 3/4 1/2 20 1/4 4 1/ PATJ9NE /2 20 1/4 4 1/ PANG9NE /2 81 1/4 3/ / PAPG9NE /8 83 3/ / PARG9NE /4 82 3/4 1/ / PASG9NE /4 83 1/2 1/ / PATJ9NE /4 1/ / PAVJ9NE / / PAWJ9NE /4 3/ / FOW CONTRO For cylinder sizing please consult M.A. Stewart & Sons td with air supply information and service conditions. Specifications and dimensions are subject to change without notice. 02/16/11

Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI

Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical

More information

KO Series. Cast Steel Gate Valves

KO Series. Cast Steel Gate Valves FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed

More information

See our expanding selection of products on Product Portfolio

See our expanding selection of products on  Product Portfolio See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page

More information

Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,

Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel, Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom

More information

KVC VALVES AND PEX FITTINGS

KVC VALVES AND PEX FITTINGS KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (

More information

See our expanding selection of products on Product Portfolio

See our expanding selection of products on  Product Portfolio See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page

More information

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB

More information

HEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10

HEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10 HEAVY DUTY KNIFE GATE VALVE The SERIES knife gate is a uni-directional lug type valve designed according to the MSS-SP-1 and TAPPI TIS 405- standard for industrial service applications. The design of the

More information

Not just your standard valve supplier but custom valve solutions for your most severe applications.

Not just your standard valve supplier but custom valve solutions for your most severe applications. Not just your standard valve supplier......but custom valve solutions for your most severe applications. Superior products and unparalleled solutions. Uni-Directional Knife Gate (Resilient Seat Optional)

More information

BULLETIN H JUNE DeZURIK KGC-BD BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES TECHNICAL SPECIFICATIONS

BULLETIN H JUNE DeZURIK KGC-BD BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES TECHNICAL SPECIFICATIONS BUETIN 3-1H JUNE 2016 DeZURIK KGC-BD BI-DIRECTIONA CAST STAINESS STEE KNIFE GATE VAVES TECHNICA SPECIFICATIONS Materials of Construction Item Description Material A1 Body 304 Stainless Steel, ASTM A3 CF8

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging

More information

GLOBE VALVE APPLICATION

GLOBE VALVE APPLICATION SPECIFICATION GOBE VAVE APPICATION Globe valves are primarily use as control valves where throttling or both throttling an shut-off are require. Globe valves can also be use for on-off service; however,

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE 11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off

More information

FABRICAST VALVE. Knife Gate Valves & Custom Fabrication Toll Free: Fax:

FABRICAST VALVE. Knife Gate Valves & Custom Fabrication Toll Free: Fax: FABRICAST VALVE Knife Gate Valves & Custom Fabrication 360-425-0306 Toll Free: 1-877-264-2503 Fax: 360-425-0353 1061 Industrial Way Longview, WA 98632 FIG 40 The Fabricast FIG 40 is a metal seated, uni-directional

More information

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963 800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300

More information

L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST

L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body

More information

Standard-Low Emission Valves to 100 PPM. A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections

Standard-Low Emission Valves to 100 PPM. A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections Standard-Low Emission Valves to 100 PPM Cast Steel Valves 150 2500 ASME; Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End Connections;

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve

More information

CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.

CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES. CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon

More information

HEAVY DUTY KNIFE GATE VALVE

HEAVY DUTY KNIFE GATE VALVE HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and

More information

Control Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM

Control Valve. 3-Piece 30, 60, or 1/8 Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM 324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on

More information

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98

More information

Ball Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661)

Ball Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661) 3451 Pegasus Drive Bakersfield, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com DHV Valve Company

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut

More information

Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...

Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR... Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI

More information

Valves. Fittings. Actuators

Valves. Fittings. Actuators Valves Fittings Actuators Low Emission Valves to 50 PPM Cast Steel Valves 150 2500 ASME; CE Registered Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged,

More information

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging

More information

Ball Valves in investment cast stainless 2-way

Ball Valves in investment cast stainless 2-way Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use

More information

flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)

flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm) flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell

More information

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N

More information

505F Multi-Port Ball Valve

505F Multi-Port Ball Valve 505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way

More information

Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²

Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm² WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off

More information

THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice

THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or

More information

Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES

Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded

More information

509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial

509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial 50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 50F Series //5-Way Flanged Ball

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries

More information

505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial

505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial 505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F

More information

Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼

Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼ Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5

More information

BUTTERFLY VALVE 17 SERIES Gearbox

BUTTERFLY VALVE 17 SERIES Gearbox DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2

More information

Keystone WINN Hi-Seal High Performance Butterfly Valve

Keystone WINN Hi-Seal High Performance Butterfly Valve m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive

More information

DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC

DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under

More information

DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES

DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:

More information

Knife Gate & Butterfly Valves Data Sheets

Knife Gate & Butterfly Valves Data Sheets Knife Gate & Butterfly Valves Data Sheets Series 80-TP Series 80-TP/XL Series 80-BA Series 80-SS Series 80-SSRS Series 80-DI Series 150 Series 120 Butterfly Valves Series TM-3 & TM-4 Butterfly Valves www.townley.net

More information

Floating Ball Valve - Design Features

Floating Ball Valve - Design Features 408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting

More information

O IL & G AS INDUSTRIAL VALVES, ACTUATORS & ACCESORIES

O IL & G AS INDUSTRIAL VALVES, ACTUATORS & ACCESORIES O IL & G AS O IL & G AS License Number 6D-1724 FORGED STEEL Size Range Ball Valves API 6D / BS EN ISO 17292 Gate Valves Globe Valves API 602 / BS EN ISO 15761 Class 150-2500 / Class 800 ½ - 2 Check Valves

More information

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963 800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Sizes ½"-36" Pressures Class Figure 150

More information

Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends

Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends 2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries

More information

CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL

CHAMPION WAFER CHECK VALVES SIZE RANGE 2 72 ASME CLASS MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS 125 2500 MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL CHAMPION VALVES, INC. DUAL DISC SPRING LOADED WAFER

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the

More information

15100 VALVES. E. Section Building Automation and Control System Guidelines

15100 VALVES. E. Section Building Automation and Control System Guidelines 15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955

More information

Model-1 Natural Gas Valves

Model-1 Natural Gas Valves Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding

More information

Evans SN Series. Evans. Sanitary & Vacuum Ball Valves

Evans SN Series. Evans. Sanitary & Vacuum Ball Valves SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN

More information

Bolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series

Bolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE

More information

C OMPANY INSIGHTS B ALL L V VALVES. Series E1500. Series E3100. Series E3200 Excaliber. Series E9100. Series E9200. Our Vision.

C OMPANY INSIGHTS B ALL L V VALVES. Series E1500. Series E3100. Series E3200 Excaliber. Series E9100. Series E9200. Our Vision. B ALL L V VALVES Series E1500 Size 1/4 to 3 316 Stainless steel body & ball Full port Body rating 1000 WOG RPTFE seats standard (other avaliable) Teflon packing Safety Locking Leaver Series E3200 Excaliber

More information

Valve Solutions for the Bulk Material Industry

Valve Solutions for the Bulk Material Industry Valve Solutions for the Bulk Material Industry SUCCESS STORY Plant name & location: Tronox, llc. Hamilton, Ms Application: Ore Silo Inlet Media: Titanium Rutile Ore Tronox, llc., formerly Kerr McGee Chemical

More information

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-29 (Rev. 02/2016)

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-29 (Rev. 02/2016) General Description The model FKB VGU-29 brings an economic solution to block abrasive and corrosive fluid sewage for granulometry until 5mm. They are light equipments, to be installed through flanges,

More information

BI-DIRECTIONAL KNIFE GATE VALVE

BI-DIRECTIONAL KNIFE GATE VALVE Wastewater treatment plants Food and Beverage Chemical plants Sizes: Working pressure: DN 2"/ 50mm to DN 10"/ 250mm DN 12"/300mm to DN 16"/ 400mm DN 18"/450mm DN 20"/500mm to DN 24"/ 600mm DN 28"/700mm

More information

P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S

P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S SERIES T WAFER PATTERN CHECK VALVE HIGH PERFORMANCE HIGH FLOW LARGE UNOBSTRUCTED FLOW PATH RUGGED, HIGH INTEGRITY CONSTRUCTION Series T Installation

More information

Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard

Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek

More information

Shearseal Knife Gate Valves. Manufactured by TSE

Shearseal Knife Gate Valves. Manufactured by TSE Shearseal Knife Gate Valves Manufactured by TSE Shearseal Design Most knife gate valve manufacturers describe their valve as rugged and dependable. In the Shearseal Valve, these qualities are not idle

More information

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016)

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016) General Description The model FKB VGU-01 is developed in accordance with MSS-SP 81 Standard and its function is blocking the fluid sewage. They are light equipments for semi-lug body and flange installation,

More information

LCS6822 (Class 150) LCS7822 (Class 300)

LCS6822 (Class 150) LCS7822 (Class 300) Revision 8/22/2012 high performance butterfly valve LCS6822 (Class 150) LCS7822 (Class 300) APPLICATIONS Ideally suited for Commercial, Industrial and Mechanical HVAC Services. Use in other applications

More information

Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.

Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Positive sealing which is mechanically achieved and does not rely

More information

516VX1VSSBIPD Pneumatic actuator - El-O-Matic

516VX1VSSBIPD Pneumatic actuator - El-O-Matic DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278

More information

Section 14. Gate Valves

Section 14. Gate Valves Section 14 Gate Valves 221 A-Gate Brass Gate Valve S Brass Brass Brass Brass and Wheel Ductile Iron Threading ISO 228 Thread BSP 180 C 16 bar General Purpose Brass Gate Valve AGVFF/015 15 43 85 50 0.24

More information

P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S

P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S P R E C I S I O N E N G I N E E R E D C E C K V A L V E S SERIES X EXTENDED BODY CECK VALVE PARTS LIST ITEM PART NAME 1 BODY 2 SEAT INSERT 3 FLAPPER 4 SPRING 5 SPRING PIN 6 SEAT SEAL IG PERFORMANCE IG

More information

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric

More information

Contents. G Series stainless steel ball valves. F Series flanged ball valves. C Series carbon steel ball valves. B Series brass/bronze ball valves

Contents. G Series stainless steel ball valves. F Series flanged ball valves. C Series carbon steel ball valves. B Series brass/bronze ball valves Product Guide Contents H Series steel ball valves Product order code information 1.1 HM-3ART/LRT: reduced port, 3 piece, NPT, API 67 1.2 HM-3AFT/LFT: full port, 3 piece, NPT, API 67 1.3 HM-3AFSW/3LFSW:

More information

Please note this is a condensed catalog. For a complete version, contact Velan directly.

Please note this is a condensed catalog. For a complete version, contact Velan directly. STANDARD KNIFE GATE VALVE DESIGN FEATURES ADVANTAGES OVER FABRICATED VALVES Cast stainless steel body and investment cast yoke. In fabricated valves, leakage of corrosive medium due to neglected maintenance

More information

Fabri-Valve. CF33/CF133 Ported Slide Gate Valve

Fabri-Valve. CF33/CF133 Ported Slide Gate Valve Fabri-Valve CF33/CF133 Ported Slide Gate Valve CF33/CF133 Ported Slide Gate Valve Fabri-Valve Figures C33 / C133 / F33 / F133 are bi-directional soft seated, slide gate valves designed for on/off service

More information

HD150/HD300 Heavy Duty Knife Gate Valve

HD150/HD300 Heavy Duty Knife Gate Valve Fabri-Valve HD150/HD300 Heavy Duty Knife Gate Valve HEAVY DUTY VALVES FOR THE OIL SANDS INDUSTRY Heavy Duty Knife Gate Valve The HD150 and HD300 Heavy Duty Knife Gate Valve The Fabri-Valve HD line of Heavy

More information

Fittings. Valves. Actuators

Fittings. Valves. Actuators Fittings Valves Actuators Low Emission Valves to 50 PPM Cast Steel Valves 150 2500 ASME; Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End

More information

Gate Valve (Model 1000)

Gate Valve (Model 1000) Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com

More information

BALL VALVE SERIES Electric actuator - El-O-matic

BALL VALVE SERIES Electric actuator - El-O-matic BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0

More information

1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)

1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME) Issued 2005/06/01 Section 15111 Valves Bronze Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards Institute (ANSI)/

More information

HANCOCK GATE, GLOBE AND CHECK VALVES CAST STEEL

HANCOCK GATE, GLOBE AND CHECK VALVES CAST STEEL ANCOCK GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal

More information

FLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30

FLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30 FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves

More information

10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction

10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction 1F-xxx Series Valve Quick Spec Product Scope Size Range 1/4" 2", (Sch 16 Pipe Bore) 2"Reduced; 3" Double Reduced Body Type 3-pc, non Swing-out design, Optional Ends Pressure Rating up to 6 psi WOG & up

More information

KNIFE GATE VALVE Product Ref. : KG02W/KG02L

KNIFE GATE VALVE Product Ref. : KG02W/KG02L General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective

More information

ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901

ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901 ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2

More information

BALL valve FLOATING BALL VALVE

BALL valve FLOATING BALL VALVE BA valve FOATING BA VAVE BA VAVE APPICATION Because of their excellent operating characteristics, ball valves are used for the broadest spectrum of isolation applications and are available in a wide range

More information

Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling.

Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling. Modentic Industrial Corp. ISO 9001 Certified. Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling. Contents A view of valve process

More information

MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of

MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing

More information

CHECK valve SPECIFICATION. glt valves CHECK VALVE APPLICATION MANUFACTURING STANDARDS

CHECK valve SPECIFICATION. glt valves CHECK VALVE APPLICATION MANUFACTURING STANDARDS CECK VAVE APPICATION SPECIFICATION Sometimes referre to as non-return valve, check valves prevents back-flow, constantly keeping flow in one irection. Check valve are esigne to close quickly an automatically

More information

WENZHOU BAIJI VALVE CO.,LTD

WENZHOU BAIJI VALVE CO.,LTD API valves Cataloge 2006 All rights reserved by Wenzhou Baiji Valve Co.,Ltd CN. API 600 CAST STEEL VALVES COMPANY INTRODUCTION Wenzhou Baiji Valve Co.,LTD. BJ VALVES, is a diversified global supplier of

More information

HIGH PERFORMANCE BUTTERFLY VALVE

HIGH PERFORMANCE BUTTERFLY VALVE Revised 11/17/2017 HIGH PERFORMANCE BUTTERFLY VALVE LCS-6822 (Class 150) LCS-7822 (Class 300) APPLICATIONS Ideally suited for commercial, industrial, and mechanical HVAC services. Use in other applications

More information

Brass, Bronze, Iron and Stainless Steel Valves

Brass, Bronze, Iron and Stainless Steel Valves Price Schedule June 1, 2011 Supersedes BIV-01-11 07 Brass, Bronze, Iron and Stainless Steel Valves ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC 125 WSP/200 WOG BRONZE GATE VALVES

More information

SECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.

SECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section. SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division

More information

Fabri-Valve Push Through Slurry Valve SV1. Engineered Valves

Fabri-Valve Push Through Slurry Valve SV1. Engineered Valves Fabri-Valve Push Through Slurry Valve SV1 Engineered Valves Fabri-Valve SV1 - Push Through Slurry Valve The Fabri-Valve SV1 Push-Through Slurry Valve is one of the most versatile knife gate valve configurations

More information

Cast Steel. Carbon and Stainless Steel Gate, Globe and Check Valves

Cast Steel. Carbon and Stainless Steel Gate, Globe and Check Valves Cast Steel Carbon and Stainless Steel Gate, Globe and Check Valves Contents Cast Steel Standard Features 3 Testing, Modifications and Accessories Standard Product Range With DSI Zy-Gear Bevel Gear Chart

More information

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015)

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015) General Description The FKB Knife-gate valves model VGU-05 brings cost-effective solution to block the flow of abrasive fluids. These are strong equipments to be installed between flanges, which has Wafer

More information

Cover Page - Butterfly Valves Ordering Information Design Features, 2 to 12 Design Features, 2 to 12 (continued)

Cover Page - Butterfly Valves Ordering Information Design Features, 2 to 12 Design Features, 2 to 12 (continued) DESCRIPTION Cover Page - Butterfly Vs Ordering Information Design Features, 2 to 2 Design Features, 2 to 2 (continued) Design Features, 2 to 2 (continued) Design Features, 4 to 4 CV Chart, 2 to 4 Torque

More information

KE Series. Through Conduit, Double Expanding Gate Valves

KE Series. Through Conduit, Double Expanding Gate Valves KE Series Through Conduit, Double Expanding Gate Valves The KE Series is an advanced API 6D designed gate valve that provides a tight mechanically activated seal. It has double sealing, bi-directional

More information

BALL VALVE SERIES Pneumatic actuator - El-O-Matic

BALL VALVE SERIES Pneumatic actuator - El-O-Matic C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G

More information

TECHNICAL DATASHEET Pacific CSV Cast Steel Valves

TECHNICAL DATASHEET Pacific CSV Cast Steel Valves brands you trust. TECNICA DATASEET Pacific CSV Cast Steel Valves Crane ChemPharma & Energy Gate, Globe and Check Features and Benefits The new Pacific CSV valves have been redesigned to improve performance

More information

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the

More information

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product

More information