Category 1 - Bull bars and Roof racks (load carrying)

Transcription

1 ANNEX A SPECIFICATIONS OF VEHICLE ACCESSORIES The items requested are gruped in fur categries. Participants can bid fr each categry individually. Please pay attentin t the cmpatibility requirement f bullbar and winches thugh. Please qute n fllwing INCOTERMS (2010) INCOTERM I: FCA Factry/Stck INCOTERM II: DAP Laem Chabang/Thailand Cnsignee RMA Autmtive C.,Ltd. 203, Laem Chabang Exprt Industrial Zne, Laem Chabang Industrial Estate, M 3, Sukhumvit Rad, Tungsukhla, Sriracha Chnburi 20230, Thailand INCOTERM III: DAP Brussels/Belgium Cnsignee N.V. REIBEL S.A. Chaussée de Vilvrde, 11, Vilvrdsteenweg B-1120 BRUSSELS Sea freight shall be cnsidered fr DAP INCOTERMS 1. Bull bars and rf racks 2. Electric Winches 3. Shatter resistant film 4. Others Categry 1 - Bull bars and Rf racks (lad carrying) 1.1 Bull bar fr Tyta Prad The Bull bar incrprates a tapered channel replacing the riginal bumper t enhance the apprach and departure angles.

2 Manufactured frm black pwder cated steel Must be an air bag cmpatible (with relevant mdels) munting system that secures t chassis via high tensile blts; Acceptance criteria: dcumented evidence f full barrier crash test required, evidenced wrk with OEM partner n frntal prtectin system. Required dcument: test reprt and prf f evidenced wrk with OEM partner Must have facility t munt HF Radi Antenna (RHD / LHD) Must have facility t munt Fg lamps Tw (2) high lift jacking pints (T pints), Test methdlgy: Jack frm centre lwer edge f bull bar (wrst case lcatin) until frnt wheels are in the air. Acceptance criteria: <10mm permanent deflectin, <20% clamp lad lss, N functinal damage t Bull bar r chassis Required dcument: bjective test descriptin and reprt It has t supprt installatin f a selected range f winches cmpatibility f winch and bull bar is essential. Acceptance criteria: dynamic testing t shw n defrmatin f winch cradle under peak lad. Required dcument: test reprt The raised centre sectin must allw fr the fitting f large diameter driving lights. Retains riginal equipment tw pints In case the participating vendr is nt the manufacturer the manufacturer name and lcatin f the factry(address) has t be prvided. CAD drawing and pictures must be prvided 1.2 Bull bar fr Tyta Land Cruiser 70s The Bull bar incrprates a tapered channel replacing the riginal bumper t enhance the apprach and departure angles. Manufactured frm black pwder cated steel Must be an air bag cmpatible (with relevant mdels) munting system that secures t chassis via high tensile blts; Acceptance criteria: dcumented evidence f in-huse full barrier crash test required, evidenced wrk with OEM partner n frntal prtectin system. Required dcument: test reprt and prf f evidenced wrk with OEM partner Must have facility t munt HF Radi Antenna (RHD / LHD) Must have facility t munt Fg lamps Tw (2) high lift jacking pints (T pints), Test methdlgy: Jack frm centre lwer edge f bull bar (wrst case lcatin) until frnt wheels are in the air. Acceptance criteria: <10mm permanent deflectin, <20% clamp lad lss, N functinal damage t Bull bar r chassis Required dcument: bjective test and reprt It has t supprt installatin f a selected range f winches cmpatibility f winch and bull bar is essential. Acceptance criteria: dynamic testing t shw n defrmatin f winch cradle under peak lad. Required dcument: test reprt

3 The raised center sectin must allw fr the fitting f large diameter driving lights. Retains riginal equipment tw pints In case the participating vendr is nt the manufacturer the manufacturer name and lcatin (address) has t be prvided CAD drawing and pictures must be prvided 1.3 Bull bar fr Tyta LC 200 The Bull bar incrprates a tapered channel replacing the riginal bumper t enhance the apprach and departure angles. Manufactured frm black pwder cated steel Must be an air bag cmpatible (with relevant mdels) munting system that secures t chassis via high tensile blts; Acceptance criteria: dcumented evidence f in-huse full barrier crash test required, evidenced wrk with OEM partner n frntal prtectin system. Required dcument: test reprt and prf f evidenced wrk with OEM partner Must have facility t munt HF Radi Antenna (RHD / LHD) Must have facility t munt Fg lamps Tw (2) high lift jacking pints (T pints), Test methdlgy: Jack frm centre lwer edge f bull bar (wrst case lcatin) until frnt wheels are in the air. Acceptance criteria: <10mm permanent deflectin, <20% clamp lad lss, N functinal damage t Bull bar r chassis Required dcument: bjective test and reprt It has t supprt installatin f a selected range f winches cmpatibility f winch and bull bar is essential. Acceptance criteria: dynamic testing t shw n defrmatin f winch cradle under peak lad. Required dcument: test reprt The raised centre sectin must allw fr the fitting f large diameter driving lights. Retains riginal equipment tw pints In case the participating vendr is nt the manufacturer the manufacturer name and lcatin (address) has t be prvided CAD drawing and pictures must be prvided 1.4 Bull bar fr Nissan Patrl (ZD30) The Bull bar incrprates a tapered channel replacing the riginal bumper t enhance the apprach and departure angles. Manufactured frm black pwder cated steel Must be an air bag cmpatible (with relevant mdels) munting system that secures t chassis via high tensile blts; Acceptance criteria: dcumented evidence f in-huse full barrier crash test required, evidenced wrk with OEM partner n frntal prtectin system. Required dcument: test reprt and prf f evidenced wrk with OEM partner Must have facility t munt HF Radi Antenna (RHD / LHD) Must have facility t munt Fg lamps

4 Tw (2) high lift jacking pints (T pints), Test methdlgy: Jack frm centre lwer edge f bull bar (wrst case lcatin) until frnt wheels are in the air. Acceptance criteria: <10mm permanent deflectin, <20% clamp lad lss, N functinal damage t Bull bar r chassis Required dcument: bjective test and reprt It has t supprt installatin f a selected range f winches cmpatibility f winch and bull bar is essential. Acceptance criteria: dynamic testing t shw n defrmatin f winch cradle under peak lad. Required dcument: test reprt The raised centre sectin must allw fr the fitting f large diameter driving lights. Retains riginal equipment tw pints In case the participating vendr is nt the manufacturer the manufacturer name and lcatin (address) has t be prvided CAD drawing and pictures must be prvided 1.5 HEAVY DUTY ROOF RACK WITH MOUNT FOR SPARE WHEEL FOR TOYOTA LAND CRUISER LC76 AND LC78 Heavy-duty rf rack made f rund tube cnstructed in steel and be supplied in black pwder cating finish. MIG welding t be used n the jins t ensure the ptimum strength f each rack. Evenly spaced crssed bars t supprt the lad which is rated t carry up t 150 kg. Stainless steel made feet and legs t be supplied. Tp rail t sit well abve rack flr t ensure a secure lad. Height f feet frm rack t base f rf shuld be measured t meet Tyta Land Cruiser 76 and 78 requirements. The remvable spare wheel hlder made f steel and supplied in black pwder cating finish. CAD drawing and picture t be prvided 1.6 HEAVY DUTY ROOF RACK WITH MOUNT FOR SPARE WHEEL FOR TOYOTA LAND CRUISER DOUBLE CABIN PICK-UP LC79 Heavy-duty rf rack made f rund tube cnstructed in steel and be supplied in black pwder cating finish. MIG welding t be used n the jins t ensure the ptimum strength f each rack. Evenly spaced crssed bars t supprt the lad which is rated t carry up t 150 kg. Stainless steel made feet and legs t be supplied. Tp rail t sit well abve rack flr t ensure a secure lad. Height f feet frm rack t base f rf shuld be measured t meet Tyta Land Cruiser HZJ79 Duble Cabin Pick Up requirements. The remvable spare wheel hlder made f steel and supplied in black pwder cating finish. CAD drawing and picture t be prvided

5 1.7 HEAVY DUTY ROOF RACK WITH MOUNT FOR SPARE WHEEL FOR NISSAN PATROL (ZD30) Heavy-duty rf rack made f rund tube cnstructed in steel and be supplied in black pwder cating finish. MIG welding t be used n the jins t ensure the ptimum strength f each rack. Evenly spaced crssed bars t supprt the lad which is rated t carry up t 150 kg. Stainless steel made feet and legs t be supplied. Tp rail t sit well abve rack flr t ensure a secure lad. Height f feet frm rack t base f rf shuld be measured t meet Nissan Patrl STD requirements. The remvable spare wheel hlder made f steel and supplied in black pwder cating finish. CAD drawing and picture t be prvided Categry 2 - Electric Winch 2.1 Winch wire rpe (WARN r equivalent) Winch t be munted n winch bar r bull bar minimum requirement. Rated line pull: 4,080 kg (9,000lbs) single-line Mtr: 4.6hp, 12V Geartrain: 3-Stage planetary Gear rati: 156:1 Clutch (freespling): Sliding ring gear Brake: Autmatic cne brake Drum diameter/length: 6.4cm/23cm (2.5in/9.0in) Weight: 35kg Wire Rpe size: 30m x 8 mm Wire Rpe Type: Galvanised steel Fairlead: Rller Battery leads: 2 gauge, 1.83m (72 in) Finish: Pwder Cat Wire and Wireless Remte cntrl (3.7 m) Winch must be cmpatible with the bull bars prpsed. Winch installatin and user guide needs t be prvided Price needs t include the user guide. Dimensin: L55cm/D16cm/H19cm Prvide picture and drawings 2.2 Winch synthetic rpe (WARN r equivalent) Winch t be munted n winch bar r bull bar minimum requirement. Rated line pull: 4,080 kg (9,000lbs) single-line Mtr: 4.6hp, 12V Geartrain: 3-Stage planetary Gear rati: 156:1 Clutch (freespling): Sliding ring gear Brake: Autmatic cne brake

6 Drum diameter/length: 6.4cm/23cm (2.5in/9.0in) Weight: 35kg Synthetic Rpe length: 30m Fairlead: Rller Battery leads: 2 gauge, 1.83m (72 in) Finish: Pwder Cat Wire and Wireless Remte cntrl (3.7 m) Winch must be cmpatible with the bull bars prpsed. Winch installatin and user guide needs t be prvided Price needs t include the user guide. Dimensin: L55cm/D16cm/H19cm Prvide pictures and drawings Categry 3 Shatter Resistant Film 3.1 SHATTER RESISTANT FILM FOR VEHICLES Film is a single-layer 7 mil clear abrasin resistant safety and security windw film, 175 Micrns. Clr: Clear Length: 100 Linear Ft Thickness: 7 Milli-inch (mil) Width: 60 Inch Prvide full specs f the film and user guide Categry 4 Others 4.1 Heavy Duty Jump Lead Manufactured frm quality PVC cpper cable fr maximum pwer transfer Length: 4-6 metre cable length fr flexible use Cable sectin: minimum 25mm Clur cded insulated clamps fr ease f use Surged prtected Resistant t grease, il and mst acids Capacity A The leads have insulated rbust steel clips with large integral springs Prvide pictures 4.2 HIGH-LIFT JACK WITH ADAPTER AND 4XRAC MOUNTING SET High-lift jack manufactured frm high yield and tensile irn castings with durable pwdercated finish. All cast irn Heights: min. 120 cm / 48 inches Capacity: min kg

7 Suitable fr lifting and winching. Lw pick up pint, 1 cm frm base. Lifting nse min. 10 cm. Adapter fr use with tubular slt jacking pints n bumpers, sidebars and chassis pints. Manufactured frm pwder cated steel Drawings and pictures required 4.3 High Lift jack munting brackets fr rf rack Munting slutin fr the high lift jack n the rf rack Please prvide drawings and pictures 4.4 High Lift jack munting bracket fr the inside f the vehicle Munting slutin fr the high lift jack inside the vehicle fr fllwing mdels Tyta Land Cruiser 76, 78, 79 (SC), 79 (DC) Tyta Hiace Tyta Land Cruiser 150 (Prad) Tyta Hilux SC/DC Nissan Patrl Drawings and pictures required. 4.5 PUNCTURE REPAIR KIT Fr standard tires f fllwing mdels: Tyta Land Cruiser 70series Tyta Hiace and Crlla Tyta Land Cruiser 150 (Prad) Tyta Hilux SC/DC Nissan Patrl 4.6 TOW ROPE Made f nyln Tws up t 3500 kg 2 cnvenient heavy duty snap hks Length: 4.0 m 4.5 m Pictures and drawings required 4.7 SPARE WHEEL FOR TOYOTA LAND CRUISER 70s Spare wheel fr Tyta Land Cruiser 70s; including rim and tyre tyre size: 7.50R SPARE WHEEL FOR NISSAN PATROL STD Spare wheel fr Nissan Patrl STD; including rim and tyre tyre size: 235/80R16

8 4.9 SNOW CHAIN FOR TOYOTA LAND CRUISER 70s Pair f snw chain fr Tyta Land Cruiser 70s; Tyre size: 7.50R16 Prvide drawing and picture SNOW CHAIN FOR TOYOTA PRADO Pair f snw chain fr Tyta Prad; Tyre size: 245/70R17 Prvide drawing and picture SNOW CHAIN FOR TOYOTA HILUX PICK-UP Pair f snw chain fr Tyta Hilux Duble Cabin Pick-up 2.5 TD; Tyre size: 225/70R17 Prvide drawing and picture SNOW CHAIN FOR TOYOTA COROLLA Pair f snw chain fr Tyta Crlla 1.8 GLI: Tyre size: 205/55R16 Prvide drawing and picture SNOW CHAIN FOR TOYOTA CAMRY Pair f snw chain fr Tyta Camry 2.5; Tyre size: 215/60R16 Prvide drawing and picture SNOW CHAIN FOR TOYOTA HIACE MINI-BUS Pair f snw chain fr Tyta Hiace mini-bus; Tyre size: 195/R15 Prvide drawing and picture SNOW CHAIN FOR NISSAN PATROL Pair f snw chain fr Nissan Patrl; Tyre size: 235/80R16 Prvide drawing and picture Hand Winch Free spl fr quick set up. Rated Pulling Capacity: 2400 kg Rated Lifting Capacity: 1600 kg Wire Rpe Length: 20 m Wire Rpe Diameter: 11 mm Unit Dimensin: 545x280x97 Handle Length extended: 1200 mm Weight: 12 kg Packed: in heavy duty carry bag Prvide pictures and drawing

9 4.17 Metal Jerry Can (NATO) 20 L jerry can made f steel. Fitted with flexible sput fr fuel and slide lck. breathing channel drawings and pictures required 4.18 Jerry Can Hlder Lckable jerry can hlder fr 2 x 20 L metal jerry can. Muntable n rf rack. Needs t be cmpatible with any kind f rf rack Fitted with adjustable lcking steel clasp. Hlder is made f black pwder cated stainless steel. Drawing and pictures required 4.19 Flexible Sand Ladder, Pair Fiber made recvery track sand ladders. Length: apprx. 1.5 m Galvanized steel cables and fitting Rungs manufactured frm heavy duty rubber Packed in rbust carry bag Drawing and pictures required 4.20 Fldable Shvel, Heavy Duty, suitable fr sand, snw and mud The blade f the fldable shvel is made f steel; the handle is made f plastic. Dimensin f the flded shvel LxW: apprx. 240 x 160 Dimensin f the blade: LxW: apprx. 205 x 156 mm Length f the shvel with handle (extended): apprx. 580 mm Weight: apprx g Dual psitining, shvel r he Fldable shvel packed in a fabric bag. Drawing and pictures required 4.21 Wrk Glves Leather Palm Wrk Glves with Safety Cuff Ecnmy grade split leather-palm glve with safety cuff made with a striped canvas back and knit wrist. Prvide prtectin frm handling dangerus debris. Large size. Drawing and pictures required

10 4.22 Reflecting Security Vest Security vest which is stred in the vehicle with tw reflecting stripes running hrizntal Class 2 Ecnmy Ply Mesh Zippered Hi Viz Lime Vest Reflecting stripes f min 5 cm width With reflective imprinting in the back and frnt: UNHCR Glbal Fleet Management (r similar lg) Lg size: t fit the back f the vest, frnt t fit the left upper part f the vest Lg must be reflective Please qute the vest with and withut imprinted lgs. Prvide picture