Large scale high speed machining center
|
|
- William Merritt
- 5 years ago
- Views:
Transcription
1
2
3 Large scale high speed machining center Designed fr heavy cutting, high-speed cutting and high precisin parts machining f varius industries. Car fender finishing Aerspace rib parts 5-axis with R0.5 pencil cleaning 3 Series 5-Axis High Speed Gantry Machining Center 4
4 High rigidity structure design Syetrical gemetry design with Bx-in-Bx structure f crss beam and saddle, with excellent frce flw design decrease thermal defrmatin and als reduce the weight f mving parts. Bx-in-Bx structure distributes the frce equally t imprve defrmatin and t perfrm high accuracy at high speed machining. Ram (Z-axis) is made f innvative duble-layer walls (inner and uter) structure with reinfrced ribs t carry ut the rigidity. With high pwer linear mtrs, linear scale and high rigid linear rller guideways t ensure simultaneus precisin. Trapezid structure f fixed side walls (X-axis) with linear mtrs, linear scales and high rigid linear guideways t ensure simultaneus precisin. 5 Series 5-Axis High Speed Gantry Machining Center 6
5 Excellent driving at the center f gravity & frce flw structure XYZ axis with frce syetry design, with dual driving units and equivalent unifrm frce at the center f gravity, this is t ensure ptimal surface quality and extend tl life. Twin drive Virtual twin drive Bx-in-Bx The syetry design f fur supprting pints, gravity and driving frce center is caxial, this is t perfrm high rigidity and high reliability. Ram equipped with hneycmb structure t pssess shrt frce flw, this is t perfrm the best balancing design and better gemetry interia. 7 Series 5-Axis High Speed Gantry Machining Center 8
6 Excellent 5-axis capability Multiple spindle chices t achieve wide ranges f applicatins 24,000 rpm / HSK 63A Ø406 Spindle taper Spindle speed HSK 63A 24,000 rpm KW Spindle pwer (S1/S6) Spindle trque (S1/S6) Max. swivel / rtatin speed 37 / 46 kw 60 / 73 B=30rpm C=30rpm rpm Ø180 Ø Swivel / Rtatin angle B=±105 C=± rpm 18,000 rpm / HSK 63A Ø406 Spindle taper Spindle speed Spindle pwer (S1/S6) Spindle trque (S1/S6) Max. swivel / rtatin speed HSK 63A 18,000 rpm 56 / 70 kw 89 / 111 B=30rpm C=30rpm KW rpm The innvative direct drive tw-axis head achieve flexible applicatins. N matter simultaneus 3+2 axis machining r 5- axis machining r 5-face machining peratin, it minimizes the setup time and reaches dne-in-nce prcess. Ø180 Ø ,000 rpm / HSK 100A Swivel / Rtatin angle B=±105 C=± rpm Thanks t B and C axis with direct-driven mtrs and XYZ mtins dedicating t a high speed 5-axis synchrnizatins in precius free surface machining Ø406 Spindle taper Spindle speed Spindle pwer (S1/S6) Spindle trque (S1/S6) Max. swivel / rtatin speed HSK 100A 12,000 rpm 25 / 30 kw 119 / 143 B=30rpm C=30rpm KW rpm Ø180 Ø Swivel / Rtatin angle B=±105 C=± rpm 9 Series 5-Axis High Speed Gantry Machining Center 10
7 XYZ with high speed, high accuracy linear mtr drive XYZ-axis with linear mtr drive which pwer has directly transfer withut mechanical elements, and this is t increase high speed respnse. XYZ-axis with individual linear scale t feedback the psitin and cntrl the cnturing accuracy. Benefit Circularity diagram with frward cntrl Diameter 300 Velcity 4 m/min Mass ca. 1.2t Deviatin : 0.4 μm Deviatin : 5 μm Surce : Siemens Labratry Cmparisn Linear mtr drive Optical linear scale Ball screw drive Lineaer mtr Wedge Decder Mtr Ball screw Cuplings Base Bed Slider Cunter balance system Multi-split air cnditiner Rapid traverse 60 m/min Benefit Nn-cntact, n backlash, n wear ut 100% direct-transmitted pwer, n energy lss dne by mechanical frm Simple structure, easy maintenance lnger lifetime Best dynamic/ static rigidity Rapid respnse f nitrgen hydraulic cunter balance system balances the weight f spindle and ram t make up the gravity lading f high speed and acceleratin by accumulatr principle. Prevent il frm filling up r leaking instantly causing hydraulic pressure unstable effects f ram mvement, and unwanted lead patterns may appear while machining. Lng term realiability : Linear mtr cling by independent cler, equipped with temperature sensr t mnitr mtr temperature t maintain machine service life and reliability. Accuracy & pwer saving : Spindle equipped with temperature sensr t O mnitr spindle bearing temperature ±0.1 c fr prtectin, this is t ensure accuracy and service life at high speed. Lnger electrnics lifetime : Electrical cabinet prviding with air cnditiner t maintain cabinet at a cnstant temperature fr aviding inner electrical device damaging. 11 Series 5-Axis High Speed Gantry Machining Center 12
8 Design advantages Mdular design cncept FEM-analysis and ptimal machine design with Bx-in-Bx structure f the crss beam and saddle prvide the high stiffness, fast respnse, rapid traverse fr best reliability and excellent accuracy. Mdular design structure f trapezid side walls and Bx-in-Bx crss beam with fixed wrking table fr best static and dynamic rigidity. Bx-in-Bx thermal syetry and gemetry syetry Gantry beam with Bx-in-Bx thermal and gemetrical syetrically structure t eliminate thermal and weight defrmatin. Bx-in-Bx crss beam distributes frce equally withut trsin t ensure ptimal perfrmance f high accuracy. Cllisin prtectin In case f cllisin prtectin during manufacturing prcess, especially in cmplex wrk pieces machining, the "DCM" (Dynamic Cllisin Mnitring) functin is preinstalled in Heidenhain cntrl system. DCM can identify cllisin lcatin. When there is a ptential cllisin risk within the machining space, the system will interrupt the machining prcess autmatically. Spindle is als munted by vibratin sensr t detect the ver level scillatin and iediately stps if any crash happens. When pwer failure happens, three axes f German made braking system will turn n and lck guideways autmatically t assure peratin security. Intelligence Operatinal Assistance Applicatins Machining Applicatins High dynamic characteristics The crss beam mving structure f GM is the ptimal slutin. All the mving parts are verhead and wrkpiece is munted n the fixed wrking table, this is t make easily access fr wrkpieces lading and unlading. S, the mvement characteristics des nt reduce due t the extra-lading, it als saves energy cnsumptin. Much mre lad Wrking table Fundatin Custmized slutin APEC delivers rich applicatin experiences, different kind f manufacturing needs different machining strategy, CAD/CAM prgraing and machining simulatin can be fully supprted by APEC t maximize ur prduct strength fr prductin. APEC is a machine maker, and als a channel t get high-end service, and we are glad t develp a persistant cperatin with every custmer. 13 Series 5-Axis High Speed Gantry Machining Center 14
9 Safe, simple, practical maintenance Gantry machine structure with mving crss beam and embedded wrking table makes easily access fr wrkpiece lading and unlading. The fence culd prtect the safety f maintenance persnnel, while they are wrking. Fixed wrking table enables accurate machining with heavy lading fr flexible applicatins. Max. table 2 lading is 7,000 kg/m Tl magazine with full enclsed splash guard, and this is t achieve safety regulatin. The cmplete peripheral units are placing at the side f the machine, and accrding t the site space cnstraints, the placed psitin culd be adjusted. Bth sides with ball screw chip cnveyer culd prvide excellent chip evacuatin capacity, culd als equipped with cling devices, water tank, pump and filtratin system. Side-hanging cntrl panel culd mve arund accrding t wrking request. Ensure peratrs are wrking under the safe and clearly wrking psitin Clsed machining area ensures the safety f peratrs, and frnt drs have safety lck and large reinfrced windws t bserve machining status. 15 Series 5-Axis High Speed Gantry Machining Center 16
10 Machine layut Machine specificatins Specificatins Unit GM2240 GM2732 GM2750 GM3060 Standard accessries Travel X-axis Y-axis Z-axis 4,000 2,200 3,200 5,000 2,700 2,700 1,000 6,000 3,000 Heidenhain itnc530 CNC cntrller 2-axis head with HSK 63A 24,000 rpm Autmatic tl magazine 30 tls X/Y/Z-axis with linear mtr drive Distance between spindle nse t table surface 100-1,100 (Opt ,300) X/Y/Z-axis with air cnditiner fr linear mtrs Distance between side walls Table Table length Table width T-slt size (width N. pitch) Max. table lad Spindle Spindle taper Spindle speed kg/m 2 rpm 4,030 4,300 2, x 16 x 250 4,530 3,300 3, x 12 x 250 7,000 HSK 63A 24,000 4,530 5,300 3, x 20 x 250 4,830 6,300 3, x 24 x 250 X/Y/Z-axis with Heidenhain linear scales X/Y/Z-axis with rller linear guideways X/Y/Z-axis with brake system Air cndininer fr spindle Spindle lubricatin system Cunter balance system Manual pulse generatr Air cnditiner fr electrical cabinet Auger type chip cnveyr Spindle pwer (S1/S6) Spindle trque (S1/S6) 2-Axis Head Max. swivel/rtatin speed Max. swivel/rtatin trque () kw rpm 37/46 60/73 B=30 C=30 B=760 C=800 Chip cnveyer Transfrmer Security dr interlcks Waterprf wrking lamp Full-enclsure splash guard (withut rf) Clamping trque B=2,100 C=3,000 Swivel / rtatin angle degree B=±105 C= ±200 Traverse Rapid traverse m/min XYZ=60 XYZ=50 Optinal accessries Mdel A B C D E Unit : F Acceleratin Autmatic Tl Changer Tl magazine capacity Max. tl length Max. tl diameter -with adjacent tls m/sec 2 pc XYZ= Ø100 2-axis head with HSK 63A 18,000 rpm 2-axis head with HSK 100A 12,000 rpm Autmatic tl changer 40 / 50 tls Clant thrugh spindle 20 / 70 bar Clant arund spindle nse Dryer fr spindle GM 2240 GM 2732 GM 2750 GM ,100 9,600 9,600 10,100 7,700 8,200 8,200 8,700 10,370 9,570 11,370 12,370 7,700 8,200 8,200 8,700 9,880 10,380 10,380 10,880 10,830 10,030 11,830 12,830 Max. tl diameter -withut adjacent tls Max. tl weight per piece Others Pwer supply Machine weight kg kva kg Ø ,000 67,000 84,030 99,230 Tl measuring system Wrkpiece measurement system Autmatic vltage regulatr Clant tank with pumps Chip cart X-axis travel extends per meter All specificatins and designs are subject t change withut ntice. 17 Series 5-Axis High Speed Gantry Machining Center 18
About Asia Pacific Elite Corp.
APEC Wide ranges f large-scale machining centers www.apeccnc.cm X=2~12 m Y=2.0~.0 m Rapid traverse=60 m/min X=.2~6.2 m Y=2.~.4 m Rapid traverse=12~20 m/min Abut Asia Pacific Elite Crp. Creating benchmarks
More information4 Wheel Electric Forklift Trucks B40X / B45X / B50X-5
R 4 Wheel Electric Frklift Trucks B40X / B45X / B50X-5 8,000lb t 10,000lb Capacity B40X / B45X / B50X-5 8,000lb t 10,000lb Capacity 80 VOLT Slid Sft Rider Tire PSC0708A3v2 AUTHORIZED DEALER Dsan Industrial
More informationHigh speed spindles for manual tool change
GMN Paul Müller Industrie GmbH & C. KG Äußere Bayreuther Str. 230 D-90411 Nuremberg Phne: 49 (0) 911-5691-0 Fa: 49 (0) 911-5691-221 Spindle technlgy: Phne: 49 (0) 911-56 91-2 Fa: 49 (0) 911-5691-699 Mail:
More informationTECHNICAL SPECIFICATION. SPC-4T Stirling Process Cryogenerator
TECHNICAL SPECIFICATION SPC-4T Stirling Prcess Crygeneratr Reference 80 8044_00 Issue Date April 20, 2016 Stirling Crygenics is a registered trade name f DH Industries BV Fr mre infrmatin n the Stirling
More information4 Wheel Electric Forklift Trucks B22X / B25X / B30X / B35X-5. 4,500lb to 7,000lb Capacity
4 Wheel Electric Frklift Trucks B22X / B25X / B30X / B35X-5 4,500lb t 7,000lb Capacity A CUSTOMER-DRIVEN DESIGN DRIVE THE DIFFERENCE... ... T GUARANTEE CUSTOMER SATISFACTION Extensive marketplace research
More informationAS 50. Experience Of your worksite
EN Fr decades, MECALAC has been develping and prducing high-quality and innvative wheel laders at the Büdelsdrf site in Nrthern Germany. With ur articulated laders, furwheel steered frnt laders and furwheel
More information/2017. Flexline rapid clamping systems with drive chain clamping element, T-slot and adjustment track
Traveling unit chain (adjustment track) in 3 lengths s in varius designs Mtr Advantages 8 different clamping elements 4 different T-slts 3 different adjustment tracks drive mtr and die mnitr attachable
More informationTHE 12" ACME-GRIDLEY SINGLE SPINDLE CHUCKING MACHINE
THE 12" ACME-GRIDLEY SINGLE SPINDLE CHUCKING MACHINE * THE 12" ACME-GRIDLEY The design, cnstructin and perfrmance f this new machine present a radical departure frm any single spindle machines heretfre
More informationOverall dimensions... page 34 Efficiency... page 36 Options... page 37. SJ Series screw jacks - travelling nut (Mod.B) - spare parts...
Screw jacks INDEX 1. General Screw jacks verview... page Manufacturing features... page Materials and cmpnents... page 3 Acme screw jacks summary... page 4 Ball screw jacks summary... page 5 Mdels... page
More information100 KW / 125 KVA POWERED by
100 KW / 125 KVA POWERED by MODEL Tritn Pwer is a wrld leader in the design, manufacture f statinary, mbile and rental generatr sets and Pwer Mdules frm 10 t 2000 kw. Thrugh ur cmmitment t quality we manufacture
More informationMachine Safeguarding
Machine Safeguarding General This dcument will prvide yu a high-level verview n sme best practices pertaining t machine guarding and sample types f guards fund in manufacturing settings. The Main Causes
More informationINVERTER/CHARGERS EVOLUTION SERIES. Off-Grid Power Solutions. How an Inverter/ Charger. Works... ORDER NOW
D yu yu need reliable AC pwer in a vehicle, remte lcatin r fr emergency back-up? Samlex s inverter/charger is THE chice fr a cmplete ff-grid pwer slutin. Off-Grid Pwer Slutins LUTION SERIES S Sine 1 Pure
More informationAdvanced Glove Box Specification
Advanced Glve Bx Specificatin With tw purifiers, when ne purifier d regeneratin, the systems switch t anther purifier autmatically t achieve cntinuus prductin. Frm Single t Multiple wrkstatin systems,
More informationReliable and Intelligent Energy
BRAND: MODEL: TYPE: RANGE: Descriptin : AEM MTU725ES STANDARD MTU HEAVY STANDARD 725 KVA Open Generating Set STANDARD SERIES General Specificatins f the Generating Set GENSET DATA CONTINUOUS POWER (PRP)
More informationBIG-VUE Series Meter
USA SINCE 1936 RELIABILITY BEYOND MEASURE Technical Data Sheet BIG-VUE Series Meter File N. E471457 LAC DU FLAMBEAU,WI LAC DU FLAMBEAU,WI 1/2 The mving irn & mving cil panel meters sizes 2 " 1/2, 3 " are
More informationDC Motors LAK Catalogue-2009/10 E. LAK 2000 Serie kw 0,3-30 HP 4-75Nm. t-telectric.com
DC Mtrs LAK 2080-2132 Catalgue-2009/10 E LAK 2000 Serie 080-132 0.4-22 kw 0,3-30 HP 4-75Nm t-telectric.cm List f cntents Intrductin... p. 4 Optins... Applicatin data... Bearing data... Output data... Dimensin
More informationQ U O T A T I O N REV.0 Stick-Pack MS18 6 lanes CUSTOMER: PRODUCT SPECIFICATIONS:
Santa Perpetua de M., 4th July 2008 Q U O T A T I O N 08070802 REV.0 Stick-Pack MS18 6 lanes CUSTOMER: PRODUCT SPECIFICATIONS: PRODUCT: 2 COMPONENTS: A) SOUP POWDER B) CROUTONS OR VEGETABLES FILL DOSE:
More informationLinear actuators CLA Series and CLB Series
Linear actuatrs CLA Series and CLB Series CLA-CLB Series, size 0-40 CLA-CLB Series, size 50 102 Linear actuatrs CLA Series and CLB Series.1 MANUFACTURING FEATURES Input drive: wrm gear - precisin helical
More informationThe E-Brake. Content: Basic principle The advantages The models The features
The E-Brake Cntent: Basic principle The advantages The mdels The features Belt & Pully drive Basic principle Serv electrnic Return spring O-Frame cnstructin Hw it wrks The Advantages Basic principle E-Brake
More informationReliable and Intelligent Energy
BRAND: MODEL: TYPE: RANGE: Descriptin : AEM DW200EI SOUNDPROOFED DEUTZ SOUNDPROOFED 200 KVA Sundprfed Genset SOUNDPROOFED SERIES General Specificatins f the Generating Set GENSET DATA CONTINUOUS POWER
More informationDelta RPI-M50A - India. Grid-Tied Solar Inverter RPI-M50A. The Power Behind Competitiveness. Product Features
The Pwer Behind Cmpetitiveness Delta - India Grid-Tied Slar Inverter Prduct Features Transfrmerless Inverter Dual MPP Trackers Peak Efficiency up t 98.6% Cnnects up t 10 Strings Ergnmic Grip Design Ultra
More informationMG1 TM MAGNETIC SUPER-COMPACT SYSTEM FILTER
MG1 TM MAGNETIC SUPER-COMPACT SYSTEM FILTER CT3070.0_01 EN June 2016 Patent applicatin n. 202015000064159 Super cmpact Retains all impurities Fights crrsin Increases the lifespan f the biler Maintains
More informationAN / ANR Series Characteristic Highlights
AN / ANR Series Characteristic Highlights Planet gears rtate n slid uncaged needle rller bearings fr increased stiffness and the maximum number f cntact pints. Hardened thrust washers allw the precise
More informationMG1 TM COMPACT MAGNETIC SYSTEM FILTER
MG1 TM COMPACT MAGNETIC SYSTEM FILTER CT3070.0_00 EN Nvember 2015 Patent applicatin n. 202015000064159 Super cmpact Retains all impurities Fights crrsin Increases the lifespan f the biler Maintains ptimum
More informationEffective Date: 10-January Table of Contents
Versin: 3 Page: 1 f 7 Table f Cntents 1.0 Intrductin... 2 1.1 Purpse... 2 1.2 Scpe... 2 1.3 Definitins... 2 1.4 Training Requirements... 3 2.0 General Requirements... 3 3.0 Inspectin... 3 4.0 Testing...
More informationTADANO GR300EX-1. 30t ROUGH TERRAIN CRANE SPECIFICATION & LOAD CHART
TADANO GR300EX-1 30t ROUGH TERRAIN CRANE SPECIFICATION & LOAD CHART HYDRAULIC ROUGH TERRAIN CRANE GR-300EX Left-hand steering GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-sectin, 9.7 m - 31.0
More informationDelta RPI-M50A. Grid-Tied Solar Inverter RPI-M50A. The Power Behind Competitiveness. Product Features
The Pwer Behind Cmpetitiveness Delta Grid-Tied Slar Inverter Prduct Features Transfrmerless Inverter Dual MPP Trackers Peak Efficiency up t 98.6% Cnnects up t 12 Strings Ergnmic Grip Design Ultra Cmpact
More informationHYDRAULIC BEARING PULLER
HYDRAULIC BEARING PULLER Parag Ambre 1, Akash Muppid 2, Prf. Nitin Mre 3, Anil Birajdar 4, Sandip Barathe 4 1,2,4,5 BE Mechanical, Dr. D.Y. Patil Schl f Engineering, Pune. 3 Faculty, Dr. D.Y. Patil Schl
More informationMag-Nus2 MAGNETIC, SELF CLEANING, DIRT SEPARATOR
Mag-Nus2 MAGNETIC, SELF CLEANING, DIRT SEPARATOR CT3548.0_00 EN Octber 2017 Retains all impurities Self-cleaning Excellent hydraulic prperties Can be munted n vertical, hrizntal and diagnal piping Increases
More informationCompact Safedrive with built-in Safety Brake. innovative drive systems for industrial doors. Variable Speed Safedrive with built-in Safety Brake
GfA-ELEKTROMATEN Chain Drive Operatr fr Rller Shutter Cmpact Safedrive with built-in Safety Brake Safedrive with built-in Safety Brake Chain Drive with separate Safety Brake Fire Shutter Operatr innvative
More informationANNEX A Descriptions and Photos
ANNEX A Descriptins and Phts Cmpnent One: Hrizntal autclave with biler The autclave is designed t treat infectius waste by expsure t steam at temperature f up t 130ºC and abut 1.7 bars. The autclave has
More informationCS369-R51I Thank you very much for purchasing our air conditioner.
OWNER'S MANUAL CONDITIONER REMOTE CONTROLLER ILLUSTRATION The design and specificatins are subject t change withut prir ntice fr prduct imprvement. Cnsult with the sales agency r manufacturer fr details.
More informationAPS100 Rental Generator Set Specification
APS100 Rental Generatr Set Specificatin CSA Certified STANDBY 100 kw 60 Hz/PRIME 90 kw 60 Hz FEATURES EPA TIER 4 INTERIM AND CARB CERTIFIED FOR NON-ROAD MOBIE APPICATIONS. Vltage Standby kw (kva) Prime
More informationAPS60 Rental Generator Set Specification
APS60 Rental Generatr Set Specificatin CSA Certified STANDBY 60 kw 60 Hz/PRIME 54 kw 60 Hz FEATURES EPA TIER 4 INTERIM AND CARB CERTIFIED FOR NON-ROAD MOBIE APPICATIONS. An extremely rugged cnstructin
More informationSmart Look Series Meter
File N. E471457 Technical Data Sheet Smart Lk Series Meter 1/2 The mving irn & mving cil panel meters sizes 2 " 1/2, 3 " are hused in a mulded plycarbnate cases which are suitable fr the measurement f
More informationRICHARD L. OREAIR & CO. Safety Management System
SAFETY Dc N: Revisin Date: Revisin N. 2 Initial Versin Preparatin: Safety Mgr Authrity: President Issuing Dept: Safety Page: Page 1 f 5 Purpse This prgram is written t be in cmpliance with lcal regulatry
More informationScrew jacks with travelling ball nut (Mod.B)
Screw jacks with travelling ball nut (Md.B).1 MA Series Md.B - STRUCTURAL ELEMENTS 1 2 11 16 17 1 5 4 19 15 6 18 9 20 1 10 14 8 7 12 1 - ball screw in quenched and tempered ally steel 11 - lw cver 2 -
More informationCar Refrigerator PFN-C-WEA-25/35/45/55
Car Refrigeratr PFN-C-WEA-25/35/45/55 Accessries available separately:- Prtective Transit Bag AC0V -240Vt DC 2 V Pwer Adaptr Please read this manual carefully befre using yur unit. Sectin Page Key Prduct
More informationWELCOME TO TPE. Make Gardening a Pleasure! With TPE - its Too Easy! For more information please visit our website at
Pwer Equipment WELCOME TO TPE Welcme t TPE Australia! We are Australian wned and perated, with ver 20 years experience in the Australian utdr pwer equipment industry. Our range f premium prducts are built
More informationGenerator/Loadbank Quick Connection Switchboard
/ Generatr/Ladbank Quick Cnnectin Switchbard FS2-Series Generatr/Ladbank Quick Cnnectin Slutins Brchure www.apt-pwer.cm 433 N. 36 th Street Lafayette, IN 47905 (765) 446-2343 ALN: 516 Rev. 01 Standard
More informationSafety Management System. Initial Revision Date: Version Revision No. 02 DRIVING SAFETY
Dc N: DRIVING Issue Date JAN 1995 Revisin Versin Revisin N. 02 Next Revisin Preparatin: Safety Mgr Authrity: President Issuing Dept: Safety Page: Page 1 f 5 Purpse This prgram is written t be in cmpliance
More informationPV-70 Remotely Operated Cryogenic Globe Valve Installation, Operation, and Maintenance Manual
PV-70 Remtely Operated Crygenic Glbe Valve Installatin, Operatin, and NOTIC: Printed cpies are uncntrlled. Page 1 f 12 TABL OF CONTNTS 1. INSTALLATION... 2 2. OPRATION... 4 3. MAINTNANC... 4 4. PRSSUR
More informationPSS INSTALLATION INSTRUCTIONS
PSS INSTALLATION INSTRUCTIONS Imprtant - Read Befre Starting! Befre starting yur installatin carefully read the fllwing warnings and instructins. Failure t prperly fllw the warnings and instructins culd
More informationOWNER S MANUAL. DCR-205-XX-DC Powered Drum Rotators
VESTIL MANUFACTURING CORP. 2999 N. Wayne St., Angla, IN 46703 Ph: 260-665-7586 Fax: 260-665-1339 E-mail: sales@vestil.cm Website: www.vestil.cm 0317 DCR-205-DC, MANUAL DCR-205-XX-DC Pwered Drum Rtatrs
More informationEnergyBar 6. Setup Guide
EnergyBar 6 Setup Guide WELCOME Cngratulatins n yur purchase f the Apex EnergyBar 6! The EnergyBar 6 allws the Apex system t cntrl up t six 230 vlt items such as lights, pumps, fans, heaters, chillers
More informationCONTENTS: Page 1/30 2/30 3/30 4/30 5/30 6/30 7/30 8/30 9/30 10/30 11/30 12/30 13/30 14/30 15/30 16/30 17/30 18/30&19/30 20/30&21/30 22/30 23/30
FLOW VALVES CONTENTS: Page Check valves: KO-...... CV08-2A...... CV08-2B...... CV10-2B...... Pilt perated check valves: KOHU...-...... KOHU...-S... KOHU...-E...... KOHU...-SA... KOHU16P... CPV08-3A......
More informationRIDER PALLET TRUCK RP2.0N-RP2.5N KG
RIDER PALLET TRUCK - 2 000-2 500 KG , TRUCK DIMENSIONS DISTINGUISHING MARKS 1.1 Manufacturer (abbreviatin) 1.2 Manufacturer s type designatin 1.3 Drive: electric (battery r mains), diesel, petrl, fuel
More informationTormach CNC Mill PCNC1100
Trmach CNC Mill PCNC1100 Machine Purpse: CNC machine used fr precisin cutting, drilling & frming Safety: Must wear safety glasses while perating machine. Keep. Beware f bjects that dangle and culd get
More informationVolvo FE Hybrid. volvo fe hybrid. Engine D7F Euro 5. D7F Specification 300 hp 340 hp. Diesel engine with parallell hybrid. Torque
Vlv FE Hybrid vlv fe hybrid Vehicle system verview Engine D7F Eur 5 Diesel engine with parallell hybrid Trque 3 2 1 RPM 1. Electric mtr 2. Diesel engine 3. Hybrid mde Cmparisn D7F Specificatin 300 hp 340
More informationThe Benefits of Coiled or Continuous Rod
The Benefits f Ciled r Cntinuus Rd Pr-Rd ciled rd prvides a superir alternative t cnventinal sucker rd fr bth reciprcating and PC pump systems. Remving almst all the cnnectins frm the rd string can substantially
More informationVolume 1.1 OPERATIONAL MANUAL MODEL: CG-211Y PIPE TORCH/BURNER MACHINE. by BLUEROCK Tools
Vlume 1.1 OPERATIONAL MANUAL MODEL: CG-211Y PIPE TORCH/BURNER MACHINE by BLUEROCK Tls UNPACKING THE ITEM Cautin: This machine is packed tgether with items that may be sharp, ily and verly heavy bjects.
More informationMotorized Pulley 138E, Ø 138 mm
Mtrized Pulley 138E, Ø 138 mm Mtrized Pulley 138E, with machined helical gear b, perfrms an efficiency, in a cmpact diameter f 138 mm nly. With a min RL f 300 mm and and pwers ranging frm 0.10 t 075kW
More informationDept. of Electrical Energy Conversion(E2C)
Dept. f Electrical Energy Cnversin(E2C) 3 full prfessrs 3 assciate prfessrs 2 adjunct prfessrs 1 lecturer 2 senir researchers 3 administratin staff 15 PhD students 1 Lic. ch Dr. examinatins at E2C 8 7
More informationBioWave Hydro DI-9200 User Manual
BiWave Hydr DI-9200 User Manual Assembling Hydr DI 9200: Assembling yur BiWave Hydr DI 9200, is a very shrt and simple prcess. All yu have t d is take the Hydr DI 9200 ut f the bx, make sure its standing
More informationLN products. Contents. LN Cabinets for LAN applications. LN Enclosures. LN Open Racks
LN prducts LN Cabinets fr LAN applicatins The LN cabinets is lightweight and a gd chice fr slutins where the required lad-bearing capacity is nt great and the applicatins are installed indrs. The cabinets
More informationBIOMASS WOOD BRIQUETTES PLANT PILOT PROJECT IN LEBANON. By Jean Paul SFEIR SOLARNET General Manager November
BIOMASS WOOD BRIQUETTES PLANT PILOT PROJECT IN LEBANON By Jean Paul SFEIR SOLARNET General Manager Nvember 2016 1 SUMMARY A- Prject Requirement B- Equipment Specificatins C- Operatin Technicalities D-
More informationContent. Sincere, Open. To Be The Best Battery Supplier. About Us. Page 3,4 Battery Cell. Page 5,6 Battery Pack
New Brchure 2017 1/22 CONTENT 2/22 Sincere, Open T Be The Best Supplier Cntent Abut Us Page 3, Page 5,6 Pack Page 7,8 Packs-Lead Acid Replacement Page 9,10 Charger Page 11 BMS Page 12 Slutins Page 13 Slutin
More informationA Trustworthy Partner
A Trustwrthy Partner High Rf Wide Bdy Als available in Mid Rf Wide Bdy. Standard Rf Standard Bdy A cnsistent breakthrugh perfrmer A heritage f prven perfrmance with sleek styling and the enhanced capacity
More informationDTC P0401 Exhaust Gas Recirculation Flow Insufficient Detected
DTC P0401 Exhaust Gas Recirculatin Flw Insufficient Detected DESCRIPTION Based n the driving cnditins, the ECM regulates the vlume f exhaust gas that is recirculated t the engine's cmbustin chambers and
More informationInstallation Guide Contigo 6100
Installatin Guide Cmmercial Vehicle Prductivity and Security The is a high-perfrmance beacn designed fr cmmercial prductivity and security. It is ideally suited t installatins in delivery and service fleets
More informationDelta RPI Commercial Series. Grid-Tied Solar Inverter RPI-M12 / RPI-M15A / RPI-M20A / RPI-M30. The Power Behind Competitiveness.
The Pwer Behind Cmpetitiveness Delta RPI Cmmercial Series Grid-Tied Slar Inverter RPI-M12 / RPI-M15A / RPI-M20A / RPI-M30 Prduct Features Transfrmerless Inverter Dual MPP Trackers Peak Efficiency up t
More informationRC Series. Rodless Air Cylinder Contents
Rdless Air Cylinder D RC 1Z 1X OS- Cntents Features...168 Ordering Infrmatin...169 Specificatins, Weights...170 Frce Data...170 ad and ment Data...171 Cushin Data...172 rting Cnfiguratins/Cylinder Selectin...173
More informationE+ Battery Care Guide
Electric Mtin Systems, LLC 45150 Business Curt, Suite 300 Dulles, VA 20166 USA E+ Battery Care Guide Welcme! Yur E+ Hub Battery Pack is a pwerful, sphisticated, and imprtant part f yur E+ Electric Bicycle.
More informationSafe Work Procedure Self-Loading Logging Truck
Safe Wrk Prcedure Self-Lading Lgging Truck PERSONAL PROTECTIVE EQUIPMENT: Adequate ftwear with gd tractin sles Hi-vis hardhat when ut f cab Hi-vis vest when ut f cab Hearing prtectin when driving PROCEDURES:
More informationRapid Concept Design and Optimisation of Hybrid Electric Powertrains Over Multiple Drive Cycles
Rapid Cncept Design and Optimisatin f Hybrid Electric Pwertrains Over Multiple Drive Cycles Dr. Kathryn Taylr Rmax Technlgy Webinar 10 th September 2015 Rmax Technlgy Rmax Technlgy is a leading glbal prvider
More informationFeb Present Managing Director (founder), Quantise Consulting Engineers Pty Ltd. General Manager - Machinery, Director, BMT WBM Pty Ltd.
Page 1 f 5 RUSSELL SMITH Cntact Details: Email: russell.smith@quantise.cm.au Mbile: 04 8808 8174 Years f Experience: 32 Qualificatins: B.E. (Mech.), University f Newcastle (1986) Fitter and Turner (1983)
More informationMethanol Recovery Systems
Methanl Recvery Systems Methanl Recvery fr bidiesel is an imprtant part f the entire bidiesel prcess and invlves the highest cst f peratin fr a bidiesel plant. Only abut half f the methanl used is actually
More informationSTART-UP DRIP IRRIGATION SYSTEM
START-UP DRIP IRRIGATION SYSTEM CHECK LIST Erick Smith, Dari Chavez, Tim Clng, and Lenny Wells, UGA Department f Hrticulture Wesley Prter, UGA Department f Crp and Sil Sciences Specialty crps such as fruits,
More informationTips & Technology For Bosch business partners
Tips & Technlgy Fr Bsch business partners Current tpics fr successful wrkshps N. 35/2011 Gasline injectin Invented fr life Lambda sensr Knw-hw frm the market leader Bsch, innvative cmpany and wrld's largest
More informationMotorized Pulley 320L, 320M & 320H, Ø in. (321 mm)
Mtrized Pulley 320L, 320M & 320H, Ø 12.6 in. (321 mm) Our 12.6 diameter Mtrized Pulley range fers three different perfrmance levels fr BULK applicatins: - L fr Light duty - M fr Medium duty - H fr Heavy
More informationSWP200 SERIES: PHOTOVOLTAIC KITS FOR WATER PUMPING
File ref.: KITswp0_ing Rev. 00-04.0 SWP0 SERIES: PHOTOVOLTAIC KITS FOR WATER PUMPING Water is ne f the few resurces, withut which mankind cannt d. Man has t supply with certain quantities f water in rder
More informationTrouble Shooting Guide for AFVK-SP Series Valve Kit (AF-4000 Series Gas Valves)
Truble Shting Guide fr AFVK-SP Series Valve Kit (AF-4000 Series Gas Valves) AFVK-SP, AFVK-SP-H/L, AFVK-SP-MH/L AFVK-SP Series Valve Kit Truble Shting Guide (AF-4000 Series) TABLE OF CONTENTS General Infrmatin
More informationMotorized Pulley 165E, Ø 165 mm
Mtrized Pulley 165E, Ø 165 mm Mtrized Pulley 165E, with machined helical gear b, perfrms an efficiency, in a cmpact diameter f 165 mm nly. With a min RL f 400 mm and and pwers ranging frm 0.11kW t 1.5kW
More informationHydraulic / Pneumatic Fundamentals. o Force, Pressure, Work and Power Some Basic Physics Physical Characteristics of Fluids
HYDRAULIC / PNEUMATIC PRINCIPLES I Curse Intrductin: The gal f this training curse is t prvide yu with a slid understanding f the general cncepts assciated with Hydraulic and Pneumatic equipment as fund
More informationVolume 1.1 OPERATIONAL MANUAL MODEL: CG-211C PIPE TORCH/BURNER MACHINE. by BLUEROCK Tools
Vlume 1.1 OPERATIONAL MANUAL MODEL: CG-211C PIPE TORCH/BURNER MACHINE by BLUEROCK Tls UNPACKING THE ITEM Cautin: This machine is packed tgether with items that may be sharp, ily and verly heavy bjects.
More informationBC7 BATTERY CABINET INSTALLATION / OPERATION / MAINTENANCE
BC7 BATTERY CABINET INSTALLATION / OPERATION / MAINTENANCE 1. INTRODUCTION... 3 2. PRECAUTIONS... 3 3. INSPECTION UPON RECEIPT OF GOODS... 4 3.1 GENERAL... 4 3.2 VISIBLE DAMAGE... 4 3.3 CONCEALED DAMAGE...
More informationDurma Press Brakes. AD-R Series. AD SERVO Series. FBS Flexible Bending Solutions. AD-S Series
Durma Press Brakes Durma press brakes guarantee precisin, lw maintenance csts, lw perating cst, and lngterm reliability. These features alng with large investments in mldern manufacturing equipment have
More information72 Mustang Mach 1 tachometer cluster and gauge conversion
72 Mustang Mach 1 tachmeter cluster and gauge cnversin Dated: 02-17-2009 (drafted by a Chevy persn wrking n his first Frd -nt gd-) The fllwing infrmatin pertains t hw I went abut cnverting the standard
More informationRejuvenation Instructions
Rejuvenatin Instructins #521 200A Elbws UPR This NRI cvers the fllwing: Hw t prepare 200amp pre-mlded elbws fr injectin. Hw t install and re-infrce an injectin elbw. Hw t size an injectin elbw t match
More informationInstallation Guide Contigo 6150 & 6151
Installatin Guide Cntig 6150 & 6151 Cmmercial Vehicle Prductivity and Security The Cntig 6150 & 6151* (cllectively knwn as the Cntig 615X) are highperfrmance beacns designed fr cmmercial prductivity and
More informationBMW M PERFORMANCE SUSPENSION. SUSPENSION SYSTEMS FOR BMW CARS. BA /2017
SUSPENSION SYSTEMS FOR BMW CARS. BA-220 05/2017 PRODUCT. BMW M Perfrmance suspensins deliver a sprty flair n every bend and stability up t the driving limits. They prvide the perfect handling prperties
More informationCourtesy of Machine.Market
GB Curtesy f Machine.Market / Curtesy f Machine.Market fr decades, mecalac has been develping and prducing high-quality and innvative wheel laders at the büdelsdrf site in nrthern germany. with ur articulated
More informationEZYTrigger. Sales and Distribution Europe. Active Trigger units for firing Power Thyristors
Active Trigger units fr firing Pwer Thyristrs Sales and Distributin Eurpe Tel.: +49 (0)2432 49677 Fax: +49 (0)2432 49656 Mail: inf@amelectrnic.de www.amelectrnic.de Active Trigger units fr firing Pwer
More informationBPC955 V0 Bliss Powercom Genset Controller. Kirloskar Electric Co. Ltd. User Manual
BPC955 V0 Bliss Pwercm Genset Cntrller Kirlskar Electric C. Ltd User Manual This dcument applies t Prduct 9001-0049 Build Versin 3600-0129 Firmware Versin 5000-xxxx The infrmatin cntained in this dcument
More informationTCL Air Cooled Condensers
PRODUCT DATA & INSTALLATION Bulletin T50-TCL-PDI-6 Part # 1089597 PRODUCT SUPPORT web: t-rp.cm/tcl email: acc-fc@t-rp.cm call: 1-844-893-3222 x526 scan: TCL Air Cled Cndensers One t Furteen Fan Mtrs R407A
More informationIQUPS.com Have you checked the IQ of your Power Systems?
IQUPS.cm Have yu checked the IQ f yur Pwer Systems? TMSPDC Transprtable Mdular (Trailer-Mdular Pwer Strage - Offices) Characteristics: Transprtable; Mdular; Simple; Rugged; Military Grade. Systems Designed
More informationAtlas Copco Surface Drill Rigs FlexiROC D60 and D65
Atlas Cpc Surface Drill Rigs Hle Diameter 110203 mm (45/168") FlexiROCD60: 110178 mm (45/'6"7") FlexiROCD65: 110203 mm (45/'6" 8") Atlas Cpc Surface drill rigs Technical specificatin ~, FlexiROC060 and065
More informationIveco New Daily Crew Van. perfect combination between people and cargo
Ivec New Daily Crew Van perfect cmbinatin between peple and carg Index Crew Van ultimate slutin fr wrk and leisure Sneks Crew Van Crew Van Cmfrt Accessries Prgram and Dimensins Specificatins and ptins
More informationAS 900telE. Experience Of your worksite
EN Fr decades, MECALAC has been develping and prducing high-quality and innvative wheel laders at the Büdelsdrf site in Nrthern Germany. With ur articulated laders, fur-wheel steered frnt laders and fur-wheel
More informationVEHICLE ACTIVATED SPEED LIMIT SIGNS
VEHICLE ACTIVATED SPEED LIMIT SIGNS TRS-VASL VEHICLE ACTIVATED SPEED LIMIT SIGNS Vehicle Activated Speed Limit (VASL) signs measure the speed f appraching vehicles. If the speed f the vehicle is higher
More informationYou have a Chiller, Now What?
Yu have a Chiller, Nw What? Raschell Hickmtt Reginal Sales Manger Dimplex Thermal Slutins Klant Klers Brand Chillers Agenda This presentatin is develped t be a very brief and generic intrductin t anyne
More information2019 Acura RDX World s First Inner & Outer Door Ring System
2019 Acura RDX Wrld s First Inner & Outer Dr Ring System Je Riggsby Hnda R&D Americas, Inc. GDIS2018 Hnda Glbal Presence & US Operatins Autmbile R&D Center (Wak) Fundamental Technlgy Research Center Aircraft
More information20/25 tm. ORMIG S.p.A. RINAQ ISO9001:2000 Ccrnted Qualify System. ORMIG S.pA TELEFAX (+39) TEL. (+39) r.a.
Member f CISQ feder t>cc RINAQ ISO9001:2000 Ccrnted Qualify System I 20/25 tm ORMIG S.p.A. TEL. (+39) 014380051 r.a. ORMIG S.pA TELEFAX (+39) 014386568 PIAZZALE ORMIG E-mail: mktg@rm igspa.cm P.O. BOX
More informationOWNER S MANUAL. MODEL HPC-400 HYDRAULIC PAIL CRUSHER Serial number
VESTIL MANUFACTURING CORP. 2999 N. Wayne St., Angla, IN 46703 Ph: 260-665-7586 Fax: 260-665-1339 E-mail: sales@vestil.cm Website: www.vestil.cm 01/08 HPC-400, 22-126-120, 0108 MODEL HPC-400 HYDRAULIC PAIL
More informationOperator s Manual with Maintenance Information. Second Edition Fourth Printing Part No
Operatr s Manual with Maintenance Infrmatin Secnd Editin Furth Printing Part N. 48643 Operatr s Manual Secnd Editin Furth Printing Imprtant Read, understand and bey these safety rules and perating instructins
More informationJTC-1040 ANTI FREEZE TESTER
JTC-1039 BATTERY TESTER JTC-1040 ANTI FREEZE TESTER JTC-1041 BATTERY HYDROMETER Avids dead battery and helps extend battery life. Test battery life by ht r cld, and detects vercharge. Applicable: 12 and
More informationINSTRUCTION MANUAL 9500/12000 LBS. D9500SC / D9500SR / D9500SRD D12000SC / D12000SR / D12000SRD MODEL:
INSTRUCTION MANUAL 95/ LBS. WINCH MODEL: D95SC / D95SR / D95SRD DSC / DSR / DSRD www.aprveatv.cm 95/ LBS. 95/ LBS. D95SC / DSC D95SR / DSR D95SRD / DSRD As yu read these instructins, yu will see WARNINGS
More informationFeel the energy in a Honda Brio
Feel the energy in a Hnda Bri Reliability with an exciting twist is what yu will experience in ur attentin grabbing Bri. With its unique styling it s easy t see hw ur Hnda engineers chse t take ur Bri
More informationThe MODUM Fire Escape Ladder
The MODUM Fire Escape Ladder The MODUM Fire Escape Ladder is elegantly designed fr permanent wall munting - and it is ready fr use in secnds. The MODUM Fire Escape Ladder is designed and manufactured in
More informationABTQ-103 rev 01 Last review:
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR ABTECH PCS Cntrl Statin Purpse f Instructins Wrking in hazardus areas, the safety f persnnel and plant depends n cmplying with all relevant safety
More information