Operation & Maintenance Manual For Commercial Use Only

Size: px
Start display at page:

Download "Operation & Maintenance Manual For Commercial Use Only"

Transcription

1 Operatin & Maintenance Manual Fr Cmmercial Use Only SWB 26/8 Battery Sweeper

2 2

3 Table f cntent 1 Safety infrmatin Safety and Warning Symbls General infrmatin Operating infrmatin Maintenance infrmatin Particular risks Envirnmental prtectin Labels n the machine Starting Up Unpacking and assembling Instructin Initial battery charge Prir t starting up Operatin Stpping the machine After cmpleting wrk Operatin Methd f peratin Operating and indicatr elements Technical Data Maintenance and Service Maintenance Plan Battery system Side brushes Rtary brush Debris cntainer Dust vacuum EC Declaratin f Cnfrmity

4 1 Safety infrmatin 1.1 Safety and Warning Symbls All paragraphs in this manual referring t yur persnal safety, the safety f yur machine and the envirnment prtectin are attributed ne f the fllwing warning symbls: Symbl Hazardus fr Descriptin Safety Prvisins persns and gds Safety Prvisins in dangerus situatin caused by misuse inaccurate adherence f instructins r prescribed wrk rutine. CAUTION the machine Imprtant infrmatin n handling the machine in rder t maintain perability. Eclgical hazard the envirnment Due t use f substances representing an inherent danger t health f envirnment 1.2 General infrmatin In additin t the infrmatin prvided Befre starting up the machine fr the first time, read the perating manual supplied with it thrughly as well as any separate manuals prvided with additinal r attachment devices and bserve all the infrmatin during wrk. The equipment may nly be perated, serviced and repaired by persnnel trained in the peratin f its use. Particular attentin shuld be paid t the infrmatin regarding safety. Technical expertise is the key t preventing errrs when perating the machine and ensuring truble-free peratin. The perating manual must always be kept at the perating lcatin f the machine and, as a result, shuld be kept in a safe place n the equipment. The warning labels attached t the machine prvided imprtant infrmatin cncerning safe peratin. Illegible r missing labels must be replaced by new nes. Fr reasns f safety, always use riginal spare parts. 1.3 Operating infrmatin Befre starting the machine up fr the first time, the battery t be used must be fully charged, prperly, by implementing the initial battery charge rutine. Please pay attentin t the perating manual prvided with the charging unit as well as the manual frm the battery manufacturer. Trnad assumes n liability fr damage t the battery caused by a fault when the battery is charged fr the first time. Check the peratinal safety f the machine each time befre starting it up! Clear any faults immediately! Befre starting wrk, the peratr must be fully familiar with all adjustment, perating and cntrl elements as well as their 4

5 respective functin! It is t late t d this when the machine is actually in peratin! Always wear heavy duty, nn-slip ftwear when wrking with the machine. The machine may nly be used n thse surfaces which have been apprved by the cntractr r persn appinted by him. When using the machine, it is essential t pay attentin t third parties, especially children. Accelerate the machine immediately after switching n the brush head drive, therwise imprints f the brush culd be prduced. The machine is nt suitable fr clearing up hazardus, inflammable r explsive fluids, dust r substances. It is frbidden t use the machine in ptentially explsive atmspheres. The side brush must be raised in rder t transprt the machine. The machine has been cnceived fr use n level surfaces with a maximum gradient f 2%. 1.4 Maintenance infrmatin Operating persnnel must cmplete the necessary daily and weekly maintenance wrk. All ther maintenance wrk must be cmpleted at yur lcal Trnad authrized service center. The maintenance wrk and maintenance intervals prescribed in the perating manual must be adhered t. Suitable tls must be used fr cleaning and maintenance wrk. The machine must be inspected by a recgnized technical expert in respect f peratinal safety, within the terms f the applicable accident preventin laws, at reasnable intervals (we recmmend at least nce a year) and fllwing mdificatin r repairs. Spare parts must cmply with the minimum technical requirements stipulated by the manufacturer! This is ensured by the use f riginal spare parts. The machine must be switched ff prir t cleaning r servicing it r t replacing parts. The drive bar must be ut f peratin! Always discnnect the battery plug befre starting any wrk n the electrical installatin. When wrking in the area f the raised hd, it must be hinged pen fully t prevent it being kncked shut r further pen and dwn unintentinally. It is nt permitted t clean the machine with a pressure washer r steam blaster. It is nt permitted t use aggressive and crrsive cleaning agents. Allw the machine t dry after being cleaned, e.g. ver the weekend. Only start the machine up when all the safety equipment has been installed and brught t its prtecting psitin. 1.5 Particular risks Electrnics In the case f defects in the electrical installatin, switch the machine ff immediately and clear the fault. Wrk n the electrical equipment may nly be carried ut by electricians wh have received the necessary training The machine's electrical equipment must be inspected/checked at regular intervals. Defects, such as lse cnnectins and cable damage, must be rectified immediately. Batteries It is pssible that sparking will ccur when cnnecting the batteries. Batteries may nly be handled and changed by prperly skilled maintenance persnnel. The machine has been set up fr peratin using maintenance-free batteries. If ther battery types are used, the machine must be set up fr use with them by an authrized Trnad service center. Never lay any metallic bjects r tls n batteries - risk f shrt circuit! 5

6 1.6 Envirnmental prtectin A certain factual expertise is required in rder t use substances which culd represent a risk t health and the envirnment. Observe the applicable laws and lcal regulatins when dispsing f waste. Used batteries with the recycling symbl cntain reusable cmmdities. In accrdance with symbl with the crssed ut bin, these batteries must nt be dispsed f in dmestic waste. 1.7 Labels n the machine The fllwing safety and warning labels are attached t the machine where easily legible. Missing r illegible labels must be replaced immediately. Cmpany lg Maximum permissible gradient Filter shaker Rating plate Wear cmpensatr fr side brush Read and bserve the perating manual Wear cmpensatr fr rtary brush 6

7 2 Starting Up Fig 1/2 2.1 Unpacking and assembling Fig 1 Open the bx, tw peple are required t remve the machine frm the prtective wrap and place it n the flr. 1. T fix the side brush (Fig 1/1) align the drive pins n the side brush drive plate and secure with the wing blt and washer supplied. 2. Lsen the tw knurled screws (Fig. 1/2) hlding the handle a few revlutins until the handle can be raised and psitined. Set the handle t a height cmfrtable fr the user and then tighten the knurled screws. 3. Remve the lcking blt (Fig 1/3) hlding the hd and pivt the hd pen. 4. Fix the disassembled cable lug (Fig. 2) t the crrespnding battery cntact. It is pssible that sparking will ccur when cnnecting the batteries! 5. Clse the hd and lck in place with the blt. 6. The unit is nw ready t perate. Fig 2 Fig 1/1 Fig 1/3 7

8 2.2 Instructin Instructins t peratrs are required befre putting the machine int service. Only technicians frm yur lcal, authrized Trnad dealer are allwed t prvide initial instructin n hw t use the machine. 2.3 Initial battery charge Befre starting the machine up fr the first time, the batteries t be used must be fully charged, prperly, by implementing the initial battery charge rutine. 2.4 Prir t starting up Carry ut the fllwing checks befre starting the machine: 1. Check the charge status f the batteries. 2. Check the levels f wear n the rtary brush and side brush. 3. Check the fill level f the debris cntainer. 2.5 Operatin Please read the Safety Infrmatin in Chapter 1. Befre switching the machine n, ensure that the drive bar (Fig. 3/3) n the handle has nt been actuated. 1. Switch the machine n using the (Fig. 3/1) buttn: rtary brush drive, dust vacuum and side brush drive are ready t perate. 2. Lwer the side brush t its wrking psitin using the lever (Fig. 3/4). When wrking withut the side brush: d nt lwer the side brush and press the buttn (Fig. 3/2) fr the side brush nce. The green cntrl lamp ges ut. 3. Actuate the drive bar (Fig. 3/3) n the handle: the machine starts t wrk. Fig.3 Start wrk immediately after actuating the drive bar, therwise imprints culd be prduced n the flr. Release the drive bar when driving ver threshlds. 2.6 Stpping the machine When the drive bar is released, the rtary brush drive, dust vacuum and side brush drive switch ff autmatically. 8

9 2.7 After cmpleting wrk 1. Drive t an apprpriate maintenance area. 2. Stp the machine. Raise the side brush t its idle psitin and switch the machine ff. 3. Actuate the filter shaker. 4. Empty the debris cntainer. 5. Check the brush space fr accumulatins f dirt. 6. Check the charge status f the batteries. It is nt permitted t clean the machine with a pressure washer r steam blaster. 3 Operatin 3.1 Methd f peratin The Trnad SWB 26/8 is a machine designed t sweep and clean waste frm hard flrs and carpets. The side brush (Fig. 4/1) sweeps the dirt frm crners t a psitin in frnt f the rtary brush (Fig. 4/2). The rtary brush sweeps the larger particle dirt verhead int the debris cntainer (Fig. 4/3). The finer dust picked up is drawn up by the suctin turbine, fed int the filter system (Fig. 4/4) and filtered ut. Only dust-free air is fed back int the ambient air. The machine is equipped with maintenance- free batteries (Fig. 4/5), a specially adapted, fully autmatic battery charger (Fig. 4/6) and a ttal discharge signal transducer t prtect it against ttal discharge. Fig. 4 9

10 3.2 Operating and indicatr elements Operating panel 1. Cntrl lamp fr rtary brush drive, side brush drive and suctin turbine 2. ON/OFF buttn fr rtary brush drive, side brush drive and suctin turbine 3. Cntrl lamp fr side brush drive 4. ON/OFF buttn fr side brush drive 5. Cntrl lamp fr battery charger peratin 6. Charge cntrl indicatr 7. Drive bar Fig. 5/7 Fig. 5 ON/OFF buttn fr rtary brush, side brush and suctin turbine (Fig. 5/1) The buttn activates the rtary brush drive, side brush drive and suctin turbine s they are ready t perate. The side brush drive can be switched ff separately. The suctin turbine cannt be switched ff separately which prevents the dust vacuum being activated by accident. T prevent unauthrized use f the machine, switch the machine ff using the buttn (Fig. 5/1). Cntrl lamp fr rtary brush drive, side brush drive and suctin turbine (Fig. 5/2) The green cntrl lamp indicates that the rtary brush drive and suctin turbine are ready t perate. If the rtary brush r suctin turbine is verladed, a safety shutdwn is triggered and the cntrl lamp flashes. ON/OFF buttn fr side brush drive (Fig. 5/3) The buttn can be used t switch ff the side brush drive independently f the rtary brush drive and t activate it fr use again. Cntrl lamp fr side brush drive (Fig. 5/4) The green cntrl lamp indicates that the side brush drive is ready t perate. If the side brush is verladed, a safety shutdwn is triggered and the cntrl lamp flashes. Cntrl lamp fr battery charger peratin (Fig. 5/5) This cntrl lamp indicates that the batteries are being charged Charge cntrl indicatr (Fig. 5/6) During the charging prcess, the machine's electrnics system cntrls the machine is nt switched n inadvertently and indicates the charge status. The battery charge status is indicated by 4 green and 1 red LED. The battery vltage is depicted in 5 levels: > 25.1 V = all green LEDs n > 24.5 V = bttm 3 green LEDs n > 23.9 V = bttm 2 green LEDs n > 22.7 V = bttm green LED n < 22.7 V = red battery LED flashes Drive bar (Fig. 5/7) The drive bar switches all the drives which are ready t perate n r ff. The drive bar serves t prevent damage. If the drive bar is released during peratin, all the drives are switched ff. 10

11 3.2.2 Operating elements n the machine 1 Knurled screw fr the handle 2 Shaking device lever 3 Debris cntainer lck 4 Side brush lever 5 Charger cable flap Fig. 6 Knurled screws fr handle (Fig. 6/1) The tw knurled screws enable the handle t be adjusted t a cmfrtable height fr the user. Shaking device lever (Fig. 6/2) In rder t clean the filter in the dust vacuum, switch the shaking device lever several times quickly t the left and right. Debris cntainer lcks (Fig. 6/3) Pull the lck lever up in rder t remve the debris cntainer. Side brush lever (Fig. 6/4) Use the lever t lwer r raise the side brush. Charger cable flap (Fig. 6/5) The battery charger cable is lcated behind the flap t the right beside the perating panel. Pull the lck dwnwards t pen the flap. Technical Data Machine length cm/in 80/32 Machine height (handle flded) cm/in 60/24 Machine width cm/in 70/28 Wrking width cm/in 66/26 Rtary brush width cm/in 40/16 Rtary brush diameter cm/in 19/7 Area Cverage, theretical m²/sqft/h 2400/26000 Debris Cntainer Vlume Liter/Gal 40/9 Filter Surface m²/sqft 1.1/12 Nminal Vltage V 24 Pwer Cnsumptin, rtary brush drive W/A 210/8.75 Pwer Cnsumptin, side brush drive W/A 48/2 Pwer Cnsumptin, suctin turbine W/A 60/2.5 Weight withut batteries kg/lbs. 42/93 Weight with batteries kg/lbs 56/124 Nise emissin value The sund pressure level (LpA) (at the ear f the peratr) measured accrding t DIN IEC under nrmal wrking cnditins: db (A) 70 Measurement inaccuracy (KpA): db (A) 2 11

12 5 Maintenance and Service General infrmatin It is essential t pay attentin t the infrmatin in Chapter "Safety Infrmatin" befre cmpleting any service r maintenance wrk! By adhering t the maintenance wrk recmmended by us, yu can be sure that the machine is always ready t be put int peratin. Maintenance and repair wrk necessary n a daily and weekly basis can be carried ut by an peratr trained t cmplete the wrk, all ther Trnad system maintenance may nly be cmpleted by persnnel wh are crrespndingly qualified and trained. Please cntact yur nearest Trnad service center r Trnad authrized dealer. Failure t bserve this annuls any rights t claims under the terms f guarantee in respect f resulting damage r cnsequential damage. Always specify the serial number in the case f inquiries and spare parts rders, refer t sectin Rating plate. 5.1 Maintenance Plan System maintenance, custmer The fllwing maintenance wrk must be cmpleted by the custmer at the intervals stipulated. Activity Check the battery charge; recharge if necessary Empty the debris cntainer Clean the brush space Check the filter in the dust vacuum; clean, if necessary Check the rtary brush and side brush; clean, if necessary Check the sweeping pattern; readjust, if necessary Check the sealing strips n the rtary brush fr signs f wear; clean, if necessary Check the gasket n the debris cntainer Check the functin f the suctin turbine Check the debris cntainer lck Test drive and functin test Daily Interval Weekly 12

13 5.2 Battery system 1. Battery indicatr fr charger 2. Charge cntrl indicatr 3. Charger 4. Flap fr charger mains pwer cable 5. Cnnectin cable 6. Lashing straps 7. Batteries 8. Hd 9. Cnnectin plan Fig. 7 Batteries may nly be handled and changed by prperly skilled maintenance persnnel. The charge cntrl indicatr (Fig. 7/2) indicates the charge status f the batteries during peratin. When the batteries are discharged, the red LED flashes. The machine functins are restricted. Charge the batteries immediately! Charging batteries The charge cntrl indicatr (Fig. 7/2) indicates the charge status f the batteries during peratin. The batteries must be charged immediately the red LED lights up. The batteries (Fig. 7/7) are charged using the integrated battery charger (Fig. 7/3). The charger is cnnected by means f the pwer cable (Fig. 7/4). While the battery is being charged, the battery indicatr n the charger (Fig. 7/1) lights up. Befre starting the machine up fr the first time, the batteries t be used must be fully charged, prperly, by implementing the initial battery charge rutine. Trnad assumes n liability fr damage t the battery caused by a fault when the battery is charged fr the first time Ttal discharge signal transducer (TSG) The machine is equipped with a ttal discharge signal transducer t prtect the batteries against ttal discharge. The ttal discharge signal transducer is integrated in the electrnics Servicing the driving batteries Never leave discharged batteries lying arund; recharge them immediately! Remving the batteries 1. Park the machine n a level area f flr. 2. Switch ff the machine. 3. Lsen the lcking blt hlding the hd (refer t Figure 1/3) and pivt the hd pen. 4. Slacken the lashing straps (Fig. 7/6). 5. Discnnect the cnnectin cable (Fig. 7/5) frm the batteries and remve the batteries. 13

14 5.2.5 Inserting the batteries Only the special batteries apprved by Trnad may be installed at the prescribed psitin. 1. Install the tw lwer batteries in the battery hlder in accrdance with Figure Lay the rubber mat n the batteries. 3. Place the ther tw batteries n the rubber mat. 4. Tighten the lashing straps (Fig. 7/6) Dispsing f batteries Used batteries with the recycling symbl cntain reusable cmmdities. In accrdance with symbl with the crssed ut bin, these batteries must nt be dispsed f in dmestic waste. 5. Cnnect the battery ples t the cnnectin cables in accrdance with the cnnectin plan (Fig. 7/9). It is pssible that sparking will ccur when cnnecting the batteries! Check a firm fit! 6. Clse the hd (Fig. 7/8) and lck in place with the lcking blt n the frame. Fig Side brushes 1. Side brushes 2. Wing blt 3. Carrier 4. Hd 5. Adjusting blt 6. Cunternut 7. Lcking blt Changing the side brush Check the side brush (Fig. 8/1) weekly and change in the case f wear. 1. Switch the machine ff and lay it n its side. 2. Remve the wing blt (Fig. 8/2) with the washer frm underneath the side brush (Fig. 8/1). 3. Pull the side brush ff. 4. T fix the side brush align the drive pins n the side brush drive plate and secure with the wing blt and washer supplied Setting the sweeping pattern In the case f brush wear and after changing the side brush (Fig. 8/1), readjust the sweeping pattern. 1. Switch the machine ff; unscrew the lcking blt (Fig. 8/7) and pen the hd (Fig. 8/4). 2. Lsen the cunternut (Fig. 8/6) and adjust the sweeping pattern by turning the adjusting blt (Fig. 8/5) clckwise and cunter clckwise s that it tuches the flr. 3. Tighten the cunternut again and clse the hd. 4. Switch the machine n and allw the side brush t run while standing still fr a shrt time. 5. Switch the machine ff, raise the frnt a little and pull it back. 6. Check the sweeping pattern, cmparing it with a clck viewed driving frward. When set crrectly, the sweeping pattern must make an impressin n the flr between apprx. 10:00 and 4:00 ' clck. 7. Repeat the prcess, if necessary, until the sweeping pattern is set crrectly. 14

15 8. Clse the hd (Fig. 8/4) and screw the lcking blt (Fig. 8/7) back in. 5.4 Rtary brush 1. Rtary brush 2. Fillister head self-tapping screws 3. Rtary brush segment 4. Sealing strips 5. Sweeping pattern adjusting lever 6. Timing belt 7. Hd 8. Lcking blt Fig Cleaning the brush space The brush space with rtary brush (Fig. 9/1) and gaskets (Fig. 9/4) must be checked daily fr signs f dirt and cleaned, if necessary Changing the rtary brush The rtary brush (Fig. 9/1) must be checked weekly and changed in the case f wear. 1. Switch the machine ff and lay it n its side. 2. Lsen the six fillister head screws (Fig. 9/2) in the rtary brush and remve the tw rller segments. 3. Install the tw new rller segments and fix in place with the fillister head screws. 4. After changing the rtary brush, readjust the sweeping pattern as necessary Setting the sweeping pattern In the case f brush wear, and after changing the rtary brush (Fig. 9/1), readjust the sweeping pattern. 1. Switch the machine ff, unscrew the lcking blt (Fig. 9/8) and pen the hd (Fig. 9/7). 2. Lsen the wing nut n the adjusting lever (Fig. 9/5) and adjust the sweeping pattern using the adjusting lever by pivting it up and dwn until it tuches the flr. 3. Tighten the wing nut again and clse the hd Changing the sealing strips The fur sealing strips (Fig. 9/4) must be checked weekly and changed in the case f wear. 1. Switch the machine ff and lay it n its side. 2. Remve all fur sealing strips (Fig. 9/2) with hlders. 4. Switch the machine n and allw the rtary brush t run while standing still fr a shrt time. 5. Switch the machine ff, raise the frnt a little and pull it back. 6. When adjusted crrectly, there must be an apprx. 50 mm wide sweeping pattern n the flr which has parallel sides. 7. Repeat the prcess, if necessary, until the sweeping pattern is set crrectly. 8. Clse the hd (Fig. 9/7) and screw the lcking blt (Fig. 9/8) back in 3. Lsen the screws in the hlders and remve the damaged sealing strips. 4. Fix the new sealing strips n the hlders and reinstall them. 5. Adjust the sealing strips s that they tuch the flr lightly. 15

16 5.4.5 Changing the timing belt The timing belt (Fig. 9/6) must be checked every 500 perating hurs and changed in the event f wear. 1. Switch the machine ff, unscrew the lcking blt (Fig. 9/8) and pen the hd (Fig. 9/7). 2. Slacken the timing belt (Fig. 9/6) using the tensin pulley and remve the belt. 3. Slacken the tensin pulley and install the new timing belt. The timing belt is autmatically tensined by means f a tensin spring. 4. Clse the hd (Fig. 9/7) and screw the lcking blts (Fig. 9/8) back in. 5.5 Debris cntainer 1 Debris cntainer 2 Lcking mechanism 3 Seal 4 Handle Fig Emptying the debris cntainer Check the fill level f the debris cntainer (Fig. 10/1) at regular intervals (max. lad capacity 25 kg) and empty as necessary. 1. Switch the machine ff and pull the lcking mechanism (Fig. 10/2) n the debris cntainer (Fig. 10/1) upwards Changing the seal Check the seal (Fig. 10/3) weekly fr signs f wear and change it as necessary. 1. Switch ff the machine and pull the lcking mechanism (Fig. 10/2) n the debris cntainer (Fig. 10/1) upwards. 2. Pull the debris cntainer (Fig. 10/3) t the rear and ut f the machine using the handle (Fig. 10/4). 5.6 Dust vacuum 1 Filter 2 Sealing strip 3 Filter supprt frame 4 Shaking device 5 Wing blts 6 Hlders 2. Pull the debris cntainer t the rear ut f the machine using the handle (Fig. 10/4) and dispse f the waste accrding t the applicable envirnmental laws. 3. Reinstall the debris cntainer and press it against the lcking mechanism until it audibly latches int place. 3. Pull the seal fr the debris cntainer frm the filter supprt frame. Install a new seal. 4. Reinstall the debris cntainer and press it against the lcking mechanism until it audibly latches int place Fig

17 5.6.1 Cleaning the filter Clean the filter (Fig. 11/1) in the dust vacuum as necessary using the shaking device (Fig. 11/4). In the case f extreme accumulatin f dirt, clean the filter as fllws: 1. Switch the machine ff and remve the debris cntainer. 2. Lsen the wing blts (Fig. 11/5). Pivt the filter supprt frame (Fig. 11/ 3) dwn and remve it. 3. Remve the filter frm the filter supprt frame Changing the filter Check the filter (Fig. 11/1) every 250 perating hurs fr signs f wear and change it as necessary. 1. Switch the machine ff and remve the debris cntainer. 2. Unscrew the wing blts (Fig. 11/5). Pivt the filter supprt frame (Fig. 11/3) dwn and remve it Install the Lint filter If the machine is mainly used n carpet, yu have t install the lint filter (7). 1. Switch the machine ff and remve the debris cntainer. 2. Unscrew the wing blts (Fig.11/5). Pivt the filter supprt frame (3) dwn and remve it. 3. Munt the lint filter (7) between filter and the filter supprt frame 4. Hk the filter supprt frame in the hlder (Fig.11/6), if necessary, and fix in place with the wing blts. Beat the filter clean r use a vacuum cleaner. Be careful nt t damage the filter ribs! 4. Insert the crrect side f filter in the filter supprt frame. The sealing strip (Fig. 11/2) must pint twards the suctin turbine! 5. Hk the filter supprt frame in the hlder (Fig. 11/6) and fix in place with the wing blts. 6. Reinstall the debris cntainer 3. Remve the filter frm the filter supprt frame. 4. Insert the crrect side f the new filter in the filter supprt frame. The sealing strip (Fig. 11/2) must pint twards the suctin turbine! 5. Hk the filter supprt frame in the hlder (Fig. 11/6), if necessary, and fix in place with the wing blts. 6. Reinstall the debris cntainer 5. Reinstall the debris cntainer. Nise emissin value The sund pressure level (LpA) (at the ear f the peratr) measured accrding t DIN IEC under nrmal wrking cnditins: 70 db (A) Measurement inaccuracy (KpA): 2 db (A) Trnad Industries declares that the prducts Trnad SWB 26/8 t which this declaratin relates, cnfrm t the relevant prvisins f the safety and health requirements stipulated in EC Directive 2006/42/EC and is in accrdance with 2004/108/EC. EC Declaratin f Cnfrmity (crrespnds t EC Directive 2006/42/EC) Reference was made t the fllwing standards and/r nrms and/r technical specificatins t ensure prper implementatin f the safety and health requirements in the EC Directive: EN EN EN

Instruction manual. Hako Hamster 500 E ( )

Instruction manual. Hako Hamster 500 E ( ) Instructin manual Hak Hamster 500 E (6258.20) Intrductin PrefaceIntrductin Dear custmer, We hpe that the excellent qualities f the machine justify the faith yu have shwn in us by purchasing the prduct.

More information

Instruction Manual. Kleensweep KS 32 R ( )

Instruction Manual. Kleensweep KS 32 R ( ) Instructin Manual Kleensweep KS 32 R (6400.40) Intrductin Preface Dear Custmer, We are certain that the excellent qualities f the vehicle will justify the faith yu have shwn in us thrugh yur purchase.

More information

Instruction Manual. Scrubmaster B30 / B30 CL (7715)

Instruction Manual. Scrubmaster B30 / B30 CL (7715) Instructin Manual Scrubmaster B30 / B30 CL (7715) Intrductin Preface Dear custmer, It is ur desire that the gd characteristics f the Scrubmaster B30 shuld justify the cnfidence yu demnstrated by making

More information

Instruction Manual. Admiral 48D ( )

Instruction Manual. Admiral 48D ( ) Instructin Manual Admiral 48D (7580.45) Intrductin 2 PrefaceIntrductin Dear Custmer, We are certain that the excellent qualities f the vehicle will justify the faith yu have shwn in us thrugh yur purchase.

More information

Instruction Manual. Sweepmaster P1500 RH ( ) Sweepmaster D1500 RH ( )

Instruction Manual. Sweepmaster P1500 RH ( ) Sweepmaster D1500 RH ( ) Instructin Manual Sweepmaster P1500 RH (6464.10) Sweepmaster D1500 RH (6464.30) Intrductin PrefaceIntrductin Dear Custmer, We are certain that the excellent qualities f the vehicle will justify the faith

More information

Valid as of: August Minuteman International Inc. 14N845 U.S. Route 20 Pingree Grove, Illinois U.S.A.

Valid as of: August Minuteman International Inc. 14N845 U.S. Route 20 Pingree Grove, Illinois U.S.A. User Manual H26 Intrductin PrefaceIntrductin Dear custmer, It is ur desire that the gd characteristics f the H26 shuld justify the cnfidence yu demnstrated by making this purchase. Prir t the first use,

More information

Safe Handling of High Voltage Electrical components in Electrical End of Life Vehicles

Safe Handling of High Voltage Electrical components in Electrical End of Life Vehicles Safe Handling f High Vltage Electrical cmpnents in Electrical End f Life Vehicles The fllwing infrmatin is extracted frm the dcument Safe Handling f High Vltage Electrical cmpnents in Electrical End f

More information

User Manual. Phoenix 24

User Manual. Phoenix 24 User Manual Phenix 24 Intrductin PrefaceIntrductin Dear custmer, It is ur desire that the gd characteristics f the Phenix 24 shuld justify the cnfidence yu demnstrated by making this purchase. Prir t the

More information

ABTQ-103 rev 01 Last review:

ABTQ-103 rev 01 Last review: INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR ABTECH PCS Cntrl Statin Purpse f Instructins Wrking in hazardus areas, the safety f persnnel and plant depends n cmplying with all relevant safety

More information

Model: TM-3 INSTALLATION AND OPERATION INSTRUCTIONS

Model: TM-3 INSTALLATION AND OPERATION INSTRUCTIONS 120 Mdel: TM-3 INSTALLATION AND OPERATION INSTRUCTIONS IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS DO NOT ATTEMPT TO INSTALL OR OPERATE INTRODUCTION This Wired Wall Timer system was

More information

NEXT UPS Systems MANTIS II Tower 750/1000/1500 Installation and user manual English

NEXT UPS Systems MANTIS II Tower 750/1000/1500 Installation and user manual English NEXT UPS Systems MANTIS II Twer 750/1000/1500 Installatin and user manual English CONTENT IMPORTANT SAFETY INSTRUCTIONS... 1 1. Intrductin... 4 2. Descriptin f Features... 4 3. Package Cntents... 4 4.

More information

Car Refrigerator PFN-C-WEA-25/35/45/55

Car Refrigerator PFN-C-WEA-25/35/45/55 Car Refrigeratr PFN-C-WEA-25/35/45/55 Accessries available separately:- Prtective Transit Bag AC0V -240Vt DC 2 V Pwer Adaptr Please read this manual carefully befre using yur unit. Sectin Page Key Prduct

More information

E+ Battery Care Guide

E+ Battery Care Guide Electric Mtin Systems, LLC 45150 Business Curt, Suite 300 Dulles, VA 20166 USA E+ Battery Care Guide Welcme! Yur E+ Hub Battery Pack is a pwerful, sphisticated, and imprtant part f yur E+ Electric Bicycle.

More information

Trouble Shooting Guide for AFVK-SP Series Valve Kit (AF-4000 Series Gas Valves)

Trouble Shooting Guide for AFVK-SP Series Valve Kit (AF-4000 Series Gas Valves) Truble Shting Guide fr AFVK-SP Series Valve Kit (AF-4000 Series Gas Valves) AFVK-SP, AFVK-SP-H/L, AFVK-SP-MH/L AFVK-SP Series Valve Kit Truble Shting Guide (AF-4000 Series) TABLE OF CONTENTS General Infrmatin

More information

GLOBAL LIFT CORP. Owner s Manual. Superior Series Proformance Series S-350 / P-375

GLOBAL LIFT CORP. Owner s Manual. Superior Series Proformance Series S-350 / P-375 GLOBAL LIFT CORP Owner s Manual Superir Series Prfrmance Series S-350 / P-375 684 N Prt Crescent Rd Suite C Bad Axe, MI 48413 Tll Free: 866-712-0606 Fax: 989-269-5902 www.glballiftcrp.cm Page 1 SUPERIOR

More information

GLOBAL LIFT CORP. Owner s Manual. Rotational Series R-375

GLOBAL LIFT CORP. Owner s Manual. Rotational Series R-375 GLOBAL LIFT CORP Owner s Manual Rtatinal Series R-375 684 N Prt Crescent Rd Suite C Bad Axe, MI 48413 Tll Free: 866-712-0606 Fax: 989-269-5902 www.glballiftcrp.cm Page 1 ROTATIONAL SERIES POOL LIFTS R-375

More information

GLOBAL LIFT CORP Owner s Manual

GLOBAL LIFT CORP Owner s Manual GLOBAL LIFT CORP Owner s Manual 39 N. Caseville Rad PO Bx 559 Pigen, MI 48755 Tll Free: 866-712-0606 Fax: 989-453-3050 www.glballiftcrp.cm Page 1 COMMERCIAL SERIES POOL LIFTS C-350 ~ C-450 ~ C-550 TABLE

More information

EnergyBar 6. Setup Guide

EnergyBar 6. Setup Guide EnergyBar 6 Setup Guide WELCOME Cngratulatins n yur purchase f the Apex EnergyBar 6! The EnergyBar 6 allws the Apex system t cntrl up t six 230 vlt items such as lights, pumps, fans, heaters, chillers

More information

Gearbox Installation Manual

Gearbox Installation Manual Gearbx Installatin Manual Rtrk Gears HOB/MPR & HOS/MPR ranges (Electrnic cpy available n www.rtrk.cm)! This manual cntains imprtant safety infrmatin. Please ensure it is thrughly read and understd befre

More information

Tips & Technology For Bosch business partners

Tips & Technology For Bosch business partners Tips & Technlgy Fr Bsch business partners Current tpics fr successful wrkshps N. 35/2011 Gasline injectin Invented fr life Lambda sensr Knw-hw frm the market leader Bsch, innvative cmpany and wrld's largest

More information

BC7 BATTERY CABINET INSTALLATION / OPERATION / MAINTENANCE

BC7 BATTERY CABINET INSTALLATION / OPERATION / MAINTENANCE BC7 BATTERY CABINET INSTALLATION / OPERATION / MAINTENANCE 1. INTRODUCTION... 3 2. PRECAUTIONS... 3 3. INSPECTION UPON RECEIPT OF GOODS... 4 3.1 GENERAL... 4 3.2 VISIBLE DAMAGE... 4 3.3 CONCEALED DAMAGE...

More information

User Manual. E Ride 26 SPORT UMS Rev A 09/16

User Manual. E Ride 26 SPORT UMS Rev A 09/16 User Manual E Ride 26 SPORT 988726UMS Rev A 09/16 Intrductin Preface Dear custmer, Thank yu fr purchasing the Minuteman E Ride 26 SPORT. The utstanding peratinal characteristics f the E Ride 26 SPORT shuld

More information

EDBRO RIGID INCLINOMETER

EDBRO RIGID INCLINOMETER EDBRO RIGID INCLINOMETER RINC01 Installatin & Operating Instructins E5542 rev 1 (June 2010) Edbr PLC Nelsn Street, Bltn BL3 2JJ UK Tel: +44 (0) 120 4528888 Fax: +44 (0) 120 4531957 E-mail: pstmaster@edbr.cm

More information

PV-70 Remotely Operated Cryogenic Globe Valve Installation, Operation, and Maintenance Manual

PV-70 Remotely Operated Cryogenic Globe Valve Installation, Operation, and Maintenance Manual PV-70 Remtely Operated Crygenic Glbe Valve Installatin, Operatin, and NOTIC: Printed cpies are uncntrlled. Page 1 f 12 TABL OF CONTNTS 1. INSTALLATION... 2 2. OPRATION... 4 3. MAINTNANC... 4 4. PRSSUR

More information

LED Driver Feedback Signs

LED Driver Feedback Signs LED Driver Feedback Signs Installatin Instructins (029-04151-0000) Nvember 2012 Slar Kit 35AH / 55W 70AH / 55W 70AH / 85W M75-SOLAR-000S M75-SLR70-000S M75-SOLAR-000C E. 5676 Seltice Way Pst Falls, Idah

More information

Safety Rules. Danger Failure to obey the instructions and safety rules in this manual will result in death or serious injury. Do Not Operate Unless:

Safety Rules. Danger Failure to obey the instructions and safety rules in this manual will result in death or serious injury. Do Not Operate Unless: Third Editin First Printing Operatr's Manual Safety Rules Danger Failure t bey the instructins and safety rules in this manual will result in death r serius injury. D Nt Operate Unless: Yu learn and practice

More information

Design Standard - Fume Hoods & Fume Hood Exhausts

Design Standard - Fume Hoods & Fume Hood Exhausts 1.0 Intrductin Design Standard - Fume Hds & Fume Hd Exhausts The fume hd is the primary cntrl device in mst labratries fr prtecting emplyees and students frm expsure t hazardus chemicals. It is als an

More information

Volume 1.1 OPERATIONAL MANUAL MODEL: CG-211Y PIPE TORCH/BURNER MACHINE. by BLUEROCK Tools

Volume 1.1 OPERATIONAL MANUAL MODEL: CG-211Y PIPE TORCH/BURNER MACHINE. by BLUEROCK Tools Vlume 1.1 OPERATIONAL MANUAL MODEL: CG-211Y PIPE TORCH/BURNER MACHINE by BLUEROCK Tls UNPACKING THE ITEM Cautin: This machine is packed tgether with items that may be sharp, ily and verly heavy bjects.

More information

Instruction manual. Sweepmaster B1200 RH ( )

Instruction manual. Sweepmaster B1200 RH ( ) Instructin manual Sweepmaster B1200 RH (6300.30) Intrductin PrefaceIntrductin Dear custmer, It is ur desire that the gd characteristics f the Sweepmaster B1200 RH shuld justify the cnfidence yu demnstrated

More information

Effective Date: 10-January Table of Contents

Effective Date: 10-January Table of Contents Versin: 3 Page: 1 f 7 Table f Cntents 1.0 Intrductin... 2 1.1 Purpse... 2 1.2 Scpe... 2 1.3 Definitins... 2 1.4 Training Requirements... 3 2.0 General Requirements... 3 3.0 Inspectin... 3 4.0 Testing...

More information

PSS INSTALLATION INSTRUCTIONS

PSS INSTALLATION INSTRUCTIONS PSS INSTALLATION INSTRUCTIONS Imprtant - Read Befre Starting! Befre starting yur installatin carefully read the fllwing warnings and instructins. Failure t prperly fllw the warnings and instructins culd

More information

EP12M248 7 Stage Automatic Smart Battery Charger, Desulphuration& Maintainer 12V, 2 / 4 / 8A FOR AGM, GEL AND WET BATTERIES USER MANUAL

EP12M248 7 Stage Automatic Smart Battery Charger, Desulphuration& Maintainer 12V, 2 / 4 / 8A FOR AGM, GEL AND WET BATTERIES USER MANUAL EP12M248 7 Stage Autmatic Smart Battery Charger, Desulphuratin& Maintainer 12V, 2 / 4 / 8A FOR AGM, GEL AND WET BATTERIES USER MANUAL THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS 1

More information

Machine Safeguarding

Machine Safeguarding Machine Safeguarding General This dcument will prvide yu a high-level verview n sme best practices pertaining t machine guarding and sample types f guards fund in manufacturing settings. The Main Causes

More information

OWNER S MANUAL. DCR-205-XX-DC Powered Drum Rotators

OWNER S MANUAL. DCR-205-XX-DC Powered Drum Rotators VESTIL MANUFACTURING CORP. 2999 N. Wayne St., Angla, IN 46703 Ph: 260-665-7586 Fax: 260-665-1339 E-mail: sales@vestil.cm Website: www.vestil.cm 0317 DCR-205-DC, MANUAL DCR-205-XX-DC Pwered Drum Rtatrs

More information

Instruction Manual. Hako-Citymaster 1250 ( /.22/.31/.32)

Instruction Manual. Hako-Citymaster 1250 ( /.22/.31/.32) Instructin Manual Hak-Citymaster 1250 (1433.21/.22/.31/.32) Intrductin PrefaceIntrductin Dear Custmer, We are certain that the excellent qualities f the Hak-Citymaster 1250 will justify the faith yu have

More information

User Manual. X Ride 28 Riding Extractor

User Manual. X Ride 28 Riding Extractor User Manual X Ride 28 Riding Extractr Intrductin Preface Dear custmer, Thank yu fr purchasing the Minuteman X Ride 28. The utstanding peratinal characteristics f the X Ride 28 shuld justify the cnfidence

More information

Volume 1.1 OPERATIONAL MANUAL MODEL: CG-211C PIPE TORCH/BURNER MACHINE. by BLUEROCK Tools

Volume 1.1 OPERATIONAL MANUAL MODEL: CG-211C PIPE TORCH/BURNER MACHINE. by BLUEROCK Tools Vlume 1.1 OPERATIONAL MANUAL MODEL: CG-211C PIPE TORCH/BURNER MACHINE by BLUEROCK Tls UNPACKING THE ITEM Cautin: This machine is packed tgether with items that may be sharp, ily and verly heavy bjects.

More information

FIRST: Top battery (closest to the arm) SECOND: Middle battery. LAST: Top battery (furthest from arm)

FIRST: Top battery (closest to the arm) SECOND: Middle battery. LAST: Top battery (furthest from arm) Hw t Install the Batteries Hw t Hld the Lamp: The InteliEnergy Lamp selectin switches utilize the same technlgy as cell phnes: Capacitive Tuch. This assures the ultimate in lngevity because there are n

More information

CS369-R51I Thank you very much for purchasing our air conditioner.

CS369-R51I Thank you very much for purchasing our air conditioner. OWNER'S MANUAL CONDITIONER REMOTE CONTROLLER ILLUSTRATION The design and specificatins are subject t change withut prir ntice fr prduct imprvement. Cnsult with the sales agency r manufacturer fr details.

More information

USER`s Manual. Swivelling semi-automatic press. Swivelling manual press TECHNICAL DATA. - works without compressor

USER`s Manual. Swivelling semi-automatic press. Swivelling manual press TECHNICAL DATA. - works without compressor USER`s Manual Swivelling semi-autmatic press Swivelling manual press TECHNICAL DATA - wrks withut cmpressr - pens autmatically ( nly Swing S ) - swivels autmatically aside ( nly Swing S ) Dimensins in

More information

Operator s Manual with Maintenance Information. First Edition Eleventh Printing Part No

Operator s Manual with Maintenance Information. First Edition Eleventh Printing Part No Operatr s Manual with Maintenance Infrmatin First Editin Eleventh Printing Part N. 39527 Operatr's Manual First Editin Eleventh Printing Imprtant Read, understand and bey these safety rules and perating

More information

Introduction Specifications Structure & Performance Assembly Folding Operation Care & Maintenance...

Introduction Specifications Structure & Performance Assembly Folding Operation Care & Maintenance... n Intrductin... 3 Specificatins... 4 Structure & Perfrmance... 5 Assembly... 6 Flding... 7 Operatin... 8-12 Care & Maintenance... 13-15 2 P a g e Read and fllw all instructins, warnings, and ntes in this

More information

Operator s Manual with Maintenance Information. Second Edition Fourth Printing Part No

Operator s Manual with Maintenance Information. Second Edition Fourth Printing Part No Operatr s Manual with Maintenance Infrmatin Secnd Editin Furth Printing Part N. 48643 Operatr s Manual Secnd Editin Furth Printing Imprtant Read, understand and bey these safety rules and perating instructins

More information

Tools Required. Installation. Step 1. Headlight lense removal (Driver's side shown, Passenger side similar)

Tools Required. Installation. Step 1. Headlight lense removal (Driver's side shown, Passenger side similar) Tls Required Phillips Screw Driver (crner lamps) Flat Head Screw Driver (ptinal fr headlight cver) Pliers (handy t have) Electrical Tape Sturdy Cpper Wire (t use as a wire fish) 10mm Scket r Wrench (grund

More information

Safety Management System. Initial Revision Date: Version Revision No. 02 DRIVING SAFETY

Safety Management System. Initial Revision Date: Version Revision No. 02 DRIVING SAFETY Dc N: DRIVING Issue Date JAN 1995 Revisin Versin Revisin N. 02 Next Revisin Preparatin: Safety Mgr Authrity: President Issuing Dept: Safety Page: Page 1 f 5 Purpse This prgram is written t be in cmpliance

More information

RICHARD L. OREAIR & CO. Safety Management System

RICHARD L. OREAIR & CO. Safety Management System SAFETY Dc N: Revisin Date: Revisin N. 2 Initial Versin Preparatin: Safety Mgr Authrity: President Issuing Dept: Safety Page: Page 1 f 5 Purpse This prgram is written t be in cmpliance with lcal regulatry

More information

User s Manual TECHNICAL DATA

User s Manual TECHNICAL DATA User s Manual TECHNICAL DATA Dimensins...23x28x33cm Weight...13kg Vltage...... 230VAC Pwer...330W Fuse...... 6A Max. temperature...... 210 C Temperature range.....50-210 C Heating sleeve.....105 x 230

More information

Installation instructions: 13 Pin Electrical system for towing hitch

Installation instructions: 13 Pin Electrical system for towing hitch General data Part number Westfalia Vehicle Manufacturer Vehicle 321 538 300 153 ZGB 1T0 055 204 Vlkswagen Turan MY 2003> 321 538 391 105-005 - 33/07 Imprtant ntes Read the installatin manual prir t starting

More information

MG1 TM MAGNETIC SUPER-COMPACT SYSTEM FILTER

MG1 TM MAGNETIC SUPER-COMPACT SYSTEM FILTER MG1 TM MAGNETIC SUPER-COMPACT SYSTEM FILTER CT3070.0_01 EN June 2016 Patent applicatin n. 202015000064159 Super cmpact Retains all impurities Fights crrsin Increases the lifespan f the biler Maintains

More information

INSTRUCTION MANUAL 9500/12000 LBS. D9500SC / D9500SR / D9500SRD D12000SC / D12000SR / D12000SRD MODEL:

INSTRUCTION MANUAL 9500/12000 LBS. D9500SC / D9500SR / D9500SRD D12000SC / D12000SR / D12000SRD MODEL: INSTRUCTION MANUAL 95/ LBS. WINCH MODEL: D95SC / D95SR / D95SRD DSC / DSR / DSRD www.aprveatv.cm 95/ LBS. 95/ LBS. D95SC / DSC D95SR / DSR D95SRD / DSRD As yu read these instructins, yu will see WARNINGS

More information

Traffic Logix SafePace 475 Radar Speed Signs Product Specifications Version 1.2

Traffic Logix SafePace 475 Radar Speed Signs Product Specifications Version 1.2 Traffic Lgix SafePace 475 Radar Speed Signs Prduct Specificatins Versin 1.2 1 Table f Cntents Dimensins... 3 Sign Weight... 3 Accessries... 3 Technical Specificatins... 4 Pwer... 4 Radar... 4 Display...

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessry Applicatin Publicatins N. All 24107 AIR CONDITIONER ELEMENT (DX) Issue Date DEC 2002 What s New INSTALLATION The A/C kit and instructins fr the 2003 Element are all new.

More information

HIGH POWER RGB LED SERIES. The HB Series Advantage! Architectural Illumination Systems!

HIGH POWER RGB LED SERIES. The HB Series Advantage! Architectural Illumination Systems! The HB Series Advantage SGS listed cnfirming t UL Standard 2108 & 8750 Certified t CSA Standard C22.2 N.9 LED Life f 50K+ hurs, under nrmal perating cnditins Lw wattage, lw heat, lw vltage (12DVC & 24VDC

More information

READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION!

READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION! www.fabtechmtrsprts.cm 4331 EUCALYPTUS AVE ~~ CHINO, CA 91710 PHONE 909-597-7800 ** FAX 909-597-7185 1994-2001 DODGE RAM 1500 & 2500 4 WHEEL DRIVE FTS3400-50 FRONT DUAL SHOCK SYSTEM PARTS LIST: 1 EA. FT3400-50-100P

More information

EDBRO TRAILER INCLINOMETER

EDBRO TRAILER INCLINOMETER EDBRO TRAILER INCLINOMETER TINC01 (12V AND 24V VERSIONS) Installatin & Operating Instructins E5541 rev 5 (Sept 2015) Edbr PLC Nelsn Street, Bltn BL3 2JJ UK Tel: +44 (0) 120 4528888 Fax: +44 (0) 120 4531957

More information

Thank you for purchasing a SledLites.com HID system for your snowmobile. Please read all warnings and complete manual prior to installing.

Thank you for purchasing a SledLites.com HID system for your snowmobile. Please read all warnings and complete manual prior to installing. Thank yu fr purchasing a SledLites.cm HID system fr yur snwmbile. Please read all warnings and cmplete manual prir t installing. OFF ROAD USE ONLY ALL SLEDLITES.COM EQUIPMENT IS FOR OFF ROAD USE ONLY ATTENTION

More information

Appointment Plus User Instructions

Appointment Plus User Instructions Appintment Plus User Instructins This dcument prvides the user with instructins fr the Appintment Plus System. Appintment Plus System Features This is a tl fr managing the fllwing: Technician Wrk Frce

More information

Original Instructions

Original Instructions Original Instructins Safety and Operatin These instructins shuld be read thrughly by all persnnel invlved with pump peratin prir t pump installatin, peratin, r maintenance. Manual N. SRM00100 Rev. 01 (12-0064)

More information

Safety and Operation. Original Instructions

Safety and Operation. Original Instructions Original Instructins Safety and Operatin Zenith Pumps 1710 Airprt Rd. Mnre, NC 28110 USA Phne: +1.704.289.6511 E-mail: CustmerCare@ClfaxCrp.cm Internet: http://www.zenithpumps.cm Dcument N. Man-Zenith-Ops-English

More information

MEDMASTER TROFFER Luminaires for MRI/Imaging Suites LED MRIT SERIES

MEDMASTER TROFFER Luminaires for MRI/Imaging Suites LED MRIT SERIES MEDMASTER TROFFER Luminaires fr MRI/Imaging Suites PRODUCT FEATURES: Recessed munt Grid; 2' 2', 2' 4' Nn-ferrus cnstructin safe fr sensitive MRI equipment High-utput, high-cri LED lamp ptins NSF2 rating

More information

Installation Instructions AQ-5100, AQ-5200 & AQ-5300 Under Counter Water Filter Single Stage (5100), Two Stage (5200) and Three Stage (5300) systems

Installation Instructions AQ-5100, AQ-5200 & AQ-5300 Under Counter Water Filter Single Stage (5100), Two Stage (5200) and Three Stage (5300) systems Live Healthy s ' p V iv Installatin Instructins AQ-5100, AQ-5200 & AQ-5300 Under Cunter Water Filter Single Stage (5100), Tw Stage (5200) and Three Stage (5300) systems Welcme t the Aquasana experience.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessry Applicatin Publicatins N. All 24039 AIR CONDITIONER ACCORD (DX) 4-DOOR Issue Date SEP 2002 What s New The A/C kit and instructins fr the 2003 Accrd are all new. Fllw

More information

PRAIRIE 360 4X4 (KVF360-A/C), PRAIRIE 360 2X4 (KVF360-B), PRAIRIE 650 4X4 (KVF650-A/B), PRAIRIE 700 4X4 (KVF700-A/B/D),

PRAIRIE 360 4X4 (KVF360-A/C), PRAIRIE 360 2X4 (KVF360-B), PRAIRIE 650 4X4 (KVF650-A/B), PRAIRIE 700 4X4 (KVF700-A/B/D), SERVICE REPLACES: Please discard ATV 07-02 dated 4/5/07 MODEL: PRAIRIE 360 4X4 (KVF360-A/C), PRAIRIE 360 2X4 (KVF360-B), PRAIRIE 650 4X4 (KVF650-A/B), PRAIRIE 700 4X4 (KVF700-A/B/D), KFX700 (KSV700-A/B/C),

More information

Safe Work Procedure Self-Loading Logging Truck

Safe Work Procedure Self-Loading Logging Truck Safe Wrk Prcedure Self-Lading Lgging Truck PERSONAL PROTECTIVE EQUIPMENT: Adequate ftwear with gd tractin sles Hi-vis hardhat when ut f cab Hi-vis vest when ut f cab Hearing prtectin when driving PROCEDURES:

More information

Lithium Battery Shipping Overview

Lithium Battery Shipping Overview Lithium batteries are used in many electrnic devices such as cameras, cell phnes, laptp cmputers, medical equipment and pwer tls. When shipping r imprting lithium batteries, including thse cntained in

More information

Volume 1.1 OPERATIONAL MANUAL MODEL: CG-30 TRACK TORCH/BURNER MACHINE. by BLUEROCK Tools

Volume 1.1 OPERATIONAL MANUAL MODEL: CG-30 TRACK TORCH/BURNER MACHINE. by BLUEROCK Tools Vlume 1.1 OPERATIONAL MANUAL MODEL: CG-30 TRACK TORCH/BURNER MACHINE by BLUEROCK Tls UNPACKING THE ITEM Cautin: This machine is packed tgether with items that may be sharp, ily and verly heavy bjects.

More information

THE 12" ACME-GRIDLEY SINGLE SPINDLE CHUCKING MACHINE

THE 12 ACME-GRIDLEY SINGLE SPINDLE CHUCKING MACHINE THE 12" ACME-GRIDLEY SINGLE SPINDLE CHUCKING MACHINE * THE 12" ACME-GRIDLEY The design, cnstructin and perfrmance f this new machine present a radical departure frm any single spindle machines heretfre

More information

Installation Guide Contigo 6100

Installation Guide Contigo 6100 Installatin Guide Cmmercial Vehicle Prductivity and Security The is a high-perfrmance beacn designed fr cmmercial prductivity and security. It is ideally suited t installatins in delivery and service fleets

More information

Auxiliary Power Unit (APU) Owner s manual D

Auxiliary Power Unit (APU) Owner s manual D Auxiliary Pwer Unit (APU) Owner s manual 54-8293-D The Dynasys TM APU has been designed fr ease f peratin and maintenance. Review f this manual and the pre-trip inspectins will reduce any ver-the-rad perating

More information

Thank you for purchasing a SledLites.com HID system for your snowmobile. Please read all warnings and complete manual prior to installing.

Thank you for purchasing a SledLites.com HID system for your snowmobile. Please read all warnings and complete manual prior to installing. Thank yu fr purchasing a SledLites.cm HID system fr yur snwmbile. Please read all warnings and cmplete manual prir t installing. OFF ROAD USE ONLY ALL SLEDLITES.COM EQUIPMENT IS FOR OFF ROAD USE ONLY ATTENTION

More information

DriveCam Unit Installation Instructions

DriveCam Unit Installation Instructions DriveCam Unit Installatin Instructins Installatin f the DriveCam Unit is nt cmplicated, thugh care must be taken t avid specific prblems. Sme vehicles require additinal cnsideratin t determine the ptimum

More information

Traffic Logix SafePace 450 (Full & Compact) Radar Speed Signs Product Specifications Version 1.6

Traffic Logix SafePace 450 (Full & Compact) Radar Speed Signs Product Specifications Version 1.6 Traffic Lgix SafePace 450 (Full & Cmpact) Radar Speed Signs Prduct Specificatins Versin 1.6 2014-2016 Traffic Lgix Crpratin www.tapcnet.cm 5100 West Brwn Deer Rad Brwn Deer, WI 53223 1 Table f Cntents

More information

SERVICE FACTORY DIRECTED MODIFICATION MC IMMEDIATE INSPECTION REPAIR ONLY AS REQUIRED ENGINE PULLEY WEAR

SERVICE FACTORY DIRECTED MODIFICATION MC IMMEDIATE INSPECTION REPAIR ONLY AS REQUIRED ENGINE PULLEY WEAR SERVICE REPLACES: Please discard MC 06-07 dated June 27, 2006 MODEL: 2004-2005 VULCAN 2000 (VN2000-A1/L-A2/L) MC 06-07 Date: July 28, 2006 First Issued: June 27, 2006 Page 1 f 7 TITLE: ENGINE PULLEY WEAR

More information

72 Mustang Mach 1 tachometer cluster and gauge conversion

72 Mustang Mach 1 tachometer cluster and gauge conversion 72 Mustang Mach 1 tachmeter cluster and gauge cnversin Dated: 02-17-2009 (drafted by a Chevy persn wrking n his first Frd -nt gd-) The fllwing infrmatin pertains t hw I went abut cnverting the standard

More information

Anemómetros digitales portátiles AN-100 extech manual ingles USER MANUAL. Model AN100. CFM/CMM Thermo Anemometer AN100

Anemómetros digitales portátiles AN-100 extech manual ingles   USER MANUAL. Model AN100. CFM/CMM Thermo Anemometer AN100 USER MANUAL CFM/CMM Therm Anemmeter Mdel AN100 CFM/CMM Therm-Anemmeter AN100 Intrductin Cngratulatins n yur purchase f the Extech AN100 CFM/CMM Therm Anemmeter. This instrument measures Air Velcity, Air

More information

ADVISORY: General Motors Upfitter Integration Bulletin #108d P a g e 1 May 18, 2016

ADVISORY: General Motors Upfitter Integration  Bulletin #108d P a g e 1 May 18, 2016 Subject: Aftermarket ALDL r DLC Interface Devices Causing Multiple Issues Mdels All Passenger Cars and Trucks Affected: Mdel Years: 2006 and beynd Date: February 4, 2013 Revisin Date: May 18, 2016 ADVISORY:

More information

CAUTION: Do not install damaged parts!!!

CAUTION: Do not install damaged parts!!! Yur satisfactin is imprtant t us, please let us help! If yu have any questins r cncerns during the installatin, ur supprt representatives are available t assist yu. Please call: 1-877-769-3765 r Live Chat

More information

Parts Checklist: ZJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* *BOX 2* Jeep Grand Cherokee ZJ

Parts Checklist: ZJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* *BOX 2* Jeep Grand Cherokee ZJ ZJ Frnt 3-Link Lng Arm Upgrade Installatin Instructins 93-98 Jeep Grand Cherkee ZJ Parts Checklist: *BOX 1* Instructins Invice Lg decal 10001 (Qty: 1) Rck-Link decal 13287 (2) Irnrckffrad.cm decal (1)

More information

Advanced 3 Million Wireless USB Limousine Underbody Kit

Advanced 3 Million Wireless USB Limousine Underbody Kit Advanced 3 Millin Wireless USB Limusine Underbdy Kit Warning: Please check yur state and lcal laws befre installing this LED underbdy kit. Every state has different plicies and prcedures in place regarding

More information

Operator s Manual. with Maintenance Information. Seventh Second Printing Part No

Operator s Manual. with Maintenance Information. Seventh Second Printing Part No Operatr s Manual with Maintenance Infrmatin Secnd First Editin Editin Seventh Secnd Printing Part N. 43645 65176 Imprtant Read, understand and bey these safety rules and perating instructins befre perating

More information

PRE-PLANNING & DELIVERY GUIDE

PRE-PLANNING & DELIVERY GUIDE TM PRE-PLANNING & DELIVERY GUIDE Need Assistance? Call 1-888-329-4847 PRE-DELIVERY Spa Delivery Preparatin Yur spa delivery will arrive CURBSIDE at the specified delivery address yu prvided at the time

More information

BioWave Hydro DI-9200 User Manual

BioWave Hydro DI-9200 User Manual BiWave Hydr DI-9200 User Manual Assembling Hydr DI 9200: Assembling yur BiWave Hydr DI 9200, is a very shrt and simple prcess. All yu have t d is take the Hydr DI 9200 ut f the bx, make sure its standing

More information

3000-series Remote Start System with Keyless Entry. Owner's Guide

3000-series Remote Start System with Keyless Entry. Owner's Guide 3000-series Remte Start System with Keyless Entry Owner's Guide Cngratulatins Cngratulatins n the purchase f yur state-f-the-art remte start system with keyless entry. Reading this Owner s Guide prir

More information

Traffic Logix SafePace 475 Radar Speed Signs Product Specifications Version 1.0

Traffic Logix SafePace 475 Radar Speed Signs Product Specifications Version 1.0 Traffic Lgix SafePace 475 Radar Speed Signs Prduct Specificatins Versin 1.0 1 Table f Cntents Dimensins... 3 Sign Weight... 3 Accessries... 3 Technical Specificatins... 4 Pwer... 4 Radar... 4 Display...

More information

OWNER S MANUAL. CART-23 & -24, ALL MODELS Serial number

OWNER S MANUAL. CART-23 & -24, ALL MODELS Serial number 08/05 01-126-106.dc VESTIL MANUFACTURING CORP. 2999 N. Wayne St., Angla, IN 46703 Ph: 260-665-7586 Fax: 260-665-1339 E-mail: sales@vestil.cm Website: www.vestil.cm Operatin Instructins. 2-3 Rutine Maintenance

More information

INSTALLATION INSTRUCTIONS FOR PART #20001 FORCED INDUCTION BOOST COOLER WATER / METHANOL INJECTION SYSTEMS

INSTALLATION INSTRUCTIONS FOR PART #20001 FORCED INDUCTION BOOST COOLER WATER / METHANOL INJECTION SYSTEMS INSTALLATION INSTRUCTIONS FOR PART #20001 FORCED INDUCTION BOOST COOLER WATER / METHANOL INJECTION SYSTEMS Parts UHO (Ultra High Output) Pump 3 Qt Reservir 10 ft High Pressure Tubing 3ft Wire Lm 18 1/8

More information

VYLEATER DAILY HOUSEKEEPING & PREVENTATIVE MAINTENANCE PROCEDURES. Follow these procedures to keep your Vyleater running smoothly.

VYLEATER DAILY HOUSEKEEPING & PREVENTATIVE MAINTENANCE PROCEDURES. Follow these procedures to keep your Vyleater running smoothly. VYLEATER DAILY HOUSEKEEPING & PREVENTATIVE MAINTENANCE PROCEDURES! WARNING! Failure t fllw these prcedures may cause an verlad cnditin that culd result in the Vyleater becming severely damaged. Fllw these

More information

You have a Chiller, Now What?

You have a Chiller, Now What? Yu have a Chiller, Nw What? Raschell Hickmtt Reginal Sales Manger Dimplex Thermal Slutins Klant Klers Brand Chillers Agenda This presentatin is develped t be a very brief and generic intrductin t anyne

More information

;THI~~Sf\-FEJY _.:.. ;'..»...

;THI~~Sf\-FEJY _.:.. ;'..»... 45 -CHAPTER......... j...,.. 8 ~\..- ;THI~~Sf\-FEJY _.:.. ;'..».......,. np;,llf I~~yeantlfreez~in ah'penc8ntaiil~rr spllledq.l,1thefi()r ~~erifit:p1ightbe acc;~ss:lblle.i t children r ariimals.antifreezeis'txic

More information

General Faucet Installation Instructions

General Faucet Installation Instructions General Faucet Installatin Instructins Step 1: Psitin the Faucet Begin installing yur faucet by placing the gasket and faucet in psitin n the sink. (Diagram A) Frm under the sink, thread the plastic munting

More information

FEED SYSTEM ASSEMBLY & OPERATING INSTRUCTIONS

FEED SYSTEM ASSEMBLY & OPERATING INSTRUCTIONS FEED SYSTEM ASSEMBLY & OPERATING INSTRUCTIONS Hg Slat Inc. Newtn Grve, NC USA May 2017 1 Table f Cntents Safety Infrmatin... 4 General Safety Ntes... 5 General Assembly / Operatin Ntes... 6 GROW-DISK Feed

More information

Highfields Independent School and Day Nursery Mini Bus Policy

Highfields Independent School and Day Nursery Mini Bus Policy Highfields Independent Schl and Day Nursery Mini Bus Plicy Last Reviewed: Nv 2015 Apprved n: Cmmittee Respnsible: Pupil and Persnnel Next Review: Nv 2017 Apprved by: Full Gvs Highfields Schl is cmmitted

More information

Operator s Manual. with Maintenance Information. Second Edition Seventh Fourth Printing Part No

Operator s Manual. with Maintenance Information. Second Edition Seventh Fourth Printing Part No Operatr s Manual with Maintenance Infrmatin Secnd Editin Seventh Furth Printing Part N. 43645 82199 Operatr's Manual Secnd Editin Furth Printing Imprtant Read, understand and bey these safety rules and

More information

INSTALLATION INSTRUCTIONS FOR PART #47002 WATER / METHANOL INJECTION SYSTEM UNIVERSAL TURBO DIESEL

INSTALLATION INSTRUCTIONS FOR PART #47002 WATER / METHANOL INJECTION SYSTEM UNIVERSAL TURBO DIESEL Kit Cntents INSTALLATION INSTRUCTIONS FOR PART #47002 WATER / METHANOL INJECTION SYSTEM UNIVERSAL TURBO DIESEL Parts UHO Pump (Ultra High Output) 3 Qt Reservir 10 ft High Pressure Tubing 3 ft Black Wire

More information

Parts Checklist: XJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* *BOX 2* Jeep Cherokee XJ

Parts Checklist: XJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* *BOX 2* Jeep Cherokee XJ XJ Frnt 3-Link Lng Arm Upgrade Installatin Instructins 84-01 Jeep Cherkee XJ Parts Checklist: *BOX 1* Instructins Invice Lg decal 10001 (1) Rck-Link decal 13287 (2) Irnrckffrad.cm decal (1) Subframe center

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Observer Zning Bard ZONE0101ZP6 These instructins must be read and understd cmpletely befre attempting installatin Safety Labeling and Signal Wrds DANGER, WARNING, CAUTION, and

More information

TECHNICAL SPECIFICATION. SPC-4T Stirling Process Cryogenerator

TECHNICAL SPECIFICATION. SPC-4T Stirling Process Cryogenerator TECHNICAL SPECIFICATION SPC-4T Stirling Prcess Crygeneratr Reference 80 8044_00 Issue Date April 20, 2016 Stirling Crygenics is a registered trade name f DH Industries BV Fr mre infrmatin n the Stirling

More information

Parts Checklist: WJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* (1) *BOX 2* (1) Jeep Grand Cherokee WJ

Parts Checklist: WJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* (1) *BOX 2* (1) Jeep Grand Cherokee WJ Parts Checklist: *BOX 1* 13319 (1) Instructins Lg decal 10001 (Qty: 1) Rck-Link Decal 13287 (2) Irnrckffrad.cm decal (1) Subframe center 92270 (1) Subframe left uter 92256 (1) Subframe right uter 92275

More information

Methanol Recovery Systems

Methanol Recovery Systems Methanl Recvery Systems Methanl Recvery fr bidiesel is an imprtant part f the entire bidiesel prcess and invlves the highest cst f peratin fr a bidiesel plant. Only abut half f the methanl used is actually

More information

UPS. Uninterruptible Power Supply MKD 700 / 1000 XL. Manual ACX11MKS1K0000XL

UPS. Uninterruptible Power Supply MKD 700 / 1000 XL. Manual ACX11MKS1K0000XL UPS Uninterruptible Pwer Supply MKD 700 / 1000 XL Item number: ACX11MKS700000XL ACX11MKS1K0000XL Versin V1.1 May 2010 Cntent 1 Presentatin 4 2 Warranty cnditins 5 2.1 Limitatin f liability 6 3 Safety 7

More information