XJ 4 Rock-Link Long Arm Lift Kit Instructions XJ Jeep Cherokee

Size: px
Start display at page:

Download "XJ 4 Rock-Link Long Arm Lift Kit Instructions XJ Jeep Cherokee"

Transcription

1 Parts Checklist: *BOX 1* 33x17x8 Instructins Rck-Link decal (2) Irn Rck Off Rad lg decal (2) Irnrckffrad.cm decal (1) XJ/ZJ Adjustable duble shear track bar (1) Track bar male threaded end (1) XJ/ZJ duble shear track bar bracket (1) Frnt sway bar link 8.75 center t center (2) Subframe center sectin (1) Subframe left uter (1) Subframe right uter (1) IRO Bmerang Shackle (2) T-Case drp spacer (2) *BOX 2* (24x12x12) Frnt cil spring (2) U-Blt set - specific t custmer vehicle: Optinal: Frd (4 U-blts) 9/16-20 high nut (8) 9/16 hardened flat washer (8) Optinal: Dana 35/ (4 U-blts) 1/2-20 high nut (8) 1/2 hardened flat washer (8) Optinal: Chrysler (4 U-blts) 1/2-20 high nut (8) 1/2 hardened fat washer (8) #10 - Frnt Sway Bar Link Hardware (1) 3/4 hurglass bushing M00393-BK-01 (4) 12mm sway bar blt sleeve (4) M12 x 70 cl10.9 hex blt (2) M12 cl10.9 hex nut (2) 1/2 x 1 1/2 gr8 hex blt (2) 1/2 gr8 lck washer (2) 1/2 gr8 hex nut (2) Sway bar link u-bracket (2) #11 - Frnt Brake Line Relcatin Hardware (1) 1/4 x 1 Self drilling sheet metal screw (2) #20 - Frnt Track Bar Hardware (1) Track bar bushing half (4) 7/16 I.D. track bar bushing sleeve (1) 7/16 x 2 1/2 lg gr8 hex blt (1) 7/16 gr8 hex nut (1) 12mm track bar bushing sleeve (1) 7/16 flat washers (2) 12mm x 80 hex blt, class 10.9 (1) 12mm hex nut, class 10.9 (1) 7/8-14 jam nut #30 - Rear Brake Line Bracket Hardware (1) 5/16 x 1 hex blt (1) 5/16 washer (2) 5/16 hex nut (1) XJ rear brake line drp bracket (1) # /8 6 Blt IRO Flex End Hardware (2) Inner race (2) Thrust washer (2) Ball (1) x 1-3/4 Scket Head Cap Screw (6) Nylck Nut (6) XJ 4 Rck-Link Lng Arm Lift Kit Instructins XJ Jeep Cherkee 90 Degree ¼ -28 Grease Zerk Fitting (1) #134 - IRO Shackle Hardware (1) IRO shackle bushing M02247BK-01 (4) IRO bushing sleeve (2) ¼ Straight grease zerk (2) # /8 Flex End Hardware (1) End cap (2) Inner race (2) Flex end ball (1) 8-32 x 1-1/2 scket head cap screw (8) 90 ¼ -28 grease zerk fitting (1) Straight 1/4-28 grease zerk fitting (1) #181-3-Link Cntrl Arm Clamping Hardware (1) 1/4"-28 x 1-1/8 scket head cap screw (4) 3/8-16 x 1 1/4 hex blt grade 8 (1) 1/4"-28 hex nut, grade 8 (4) 3/8-16 nylck flange nut (1) 3/8 Mil Spec Hardened washer (1) #182 - XJ 3-Link Lng Arm Subframe Hardware (1) M14 x 2.0 x 90 hex blt cl10.9 (1) M14 x 2.0 x 100 hex blt cl10.9 (2) M14 x 2.0 x 110 hex blt cl10.9 (2) M10 X 30 cl10.9 hex blt (4) M10 x 80 cl10.9 hex blt (1) M10 x 25 carriage blt (4) M10 X 50 carriage blt (4) M cl10.9 hex nut (4) M cl10.9 nylck flange nut (1) 7/16-14 X 1-1/4 gr8 hex blt (2) M14 Nylck flange nut cl10.9 (4) 3/8 USS flat washer (12) 9/16 F436 hardened washer (5) Shcks IRO Hydr Frnt shck SL2450F (2) Rear shck LL2498F (2) #15 - Shck Hardware (1) 2.5 lng frnt barpin (2) 2.75 lng rear barpin (2) Detsch Upgrade (Optinal) Frnt shck DT 8352 (2) Rear shck DT 8269 (2) #15 - Shck Hardware (1) 2.5 lng frnt barpin (2) 2.75 lng rear barpin (2) Bilstein Upgrade (Optinal) Frnt shck (2) Rear shck (2) #18 - Bilstein Shcks Hardware Frnt barpin 2.5 (2) Rear barpin 2.75 (2) SBL U-bracket (2) 12mm Shck sleeve (2) 1/2 x 1 1/2 gr8 Hex Blt (2) 1/2 gr8 Hex nut (2) 1/2 USS Washer (2) 1/2 gr8 Lck washer (2) 7/16 USS Washer (6) M12x60 cl10.9 Hex blt (2)

2 Bilstein Shcks Hardware Cntinued M12 cl10.9 Hex nut (2) *BOX 3* (42x15x7) XJ Lng LCA Left (1) XJ Lng LCA Right (1) XJ 3-Link Frnt UCA (1) Angled Lng Arm Male End (2) 2 3/8 UCA Male End (1) *BOX 4* IRO Full Length Add-a-Leaf (2 Leafs) Upper leaf clamp (4) Lwer leaf clamp (4) 5/16-24 x 4 Center pin (2) 5/16-24 hex nut (2) ~Optinal Parts~ (instead f Add-a-Leaf) XJ 3.5 leaf spring (90149) (2) Bushing installatin instructins #72 Leaf Spring Bushing Hardware (1) Frnt bushing M20774 (4) Rear bushing M20775(4) Frnt bushing sleeve (2) Rear bushing sleeve (2)

3 Installatin Instructins: Safety Warning: ***Imprtant! Read befre installatin.*** Installing a suspensin lift kit raises the center f gravity f the vehicle. This increases the pssibility f a rllver accident. Avid sudden maneuvers at high speed and avid all situatins where a side rllver may ccur. In additin, larger tires decrease braking perfrmance, please drive accrdingly. We recmmend a tire and wheel cmbinatin that make the vehicle's track width wider (wheels with less backspacing than OEM). This will lwer the center f gravity and add stability. We als recmmend that this system be installed by a qualified prfessinal. Knwledge f suspensin cmpnent functin is necessary fr safe installatin and pst installatin inspectins. Be sure t re-trque all suspensin cmpnents after the first 100 miles f use, and frequently inspect all safety critical suspensin cmpnents. Befre yu begin: Read all safety warnings. Read and understand installatin instructins. *2000 and 2001 mdels with autmatic transmissins will require ld style transmissin munt such as Anchr 2625* Check all steering and suspensin cmpnents fr wear and replace as needed. Cntact Irn Rck Off Rad with any questins befre, during, r after installatin. Ensure that all parts are present and in gd cnditin using the included shipping checklist. Be sure yu have the fllwing tls and supplies: Flr jack and jack stands Basic hand tls Multi-purpse grease (all ply bushings shuld be greased befre installatin) Metal cutting tls such as a 4 ½ angle grinder with thin metal cutting wheel, and a sandpaper flap wheel fr an attractive finish. Pssibly a sawzall with metal cutting blades. Paint and primer (fr uniframe - black r yur chice f clr). Anti-seize cmpund Hand Drill 23/64 drill bit (.359 diameter) 7/16-14 Taper Hand Tap Angle finder String level r laser level Prepare the parts fr installatin: 1. Lcate hardware kit 15 and the rear shcks. 2. Grease and install the barpins int the tp side f the rear shcks. It helps t use a press, r clamp the barpin vertically in a bench vise, and lwer the shck nt the barpin while rtating the shck back and frth. Be sure t thrughly grease the barpin and the shck bushing. If needed yu can grind r file the crners f the barpin t prvide a lead in surface. Remve any sharp edges t prevent damage t the shck bushing. 3. Install the frnt barpins by repeating the prcedure in step Lcate the frnt track bar and hardware kit Thread the jam nut nt the threaded male end, then thread it int the track bar. 6. Adjust the length t 33-3/8 frnt center t center as a starting pint. This may need t be adjusted after a shrt test drive. D nt tighten jam nut at this time. D nt exceed 33-3/4 center t center track bar length. Verify that yu have a minimum f 1 thread engagement. 7. Lubricate track bar bushings and bushing sleeves with multi-purpse grease and install int track bar: smaller I.D. bushing sleeve is installed at axle end (withut adjusting threads), and larger I.D. sleeve at unibdy end (with adjusting thread). 8. Leave the rest f the hardware in the bag fr future use. 9. Lcate the frnt sway bar links, frnt sway bar link u-brackets, and hardware kit 10. (If yu purchased JKS Sway Bar Discnnect system, refer t JKS instructins. 10. Grease and install the hurglass bushings. 11. Grease and install the sway bar link inner sleeves. 12. Leave the rest f the hardware in the bag fr future use. 13. Lcate the rear leaf spring shackle kit. If equipped with ply bushings, grease and install the ply bushings and inner bushing sleeves. 14. Lcate the lwer cntrl arms (larger), male ends (larger, angled), hardware kit 127 and Assemble flex ends int male end. Use hardware kit 127 and attached instructins (2-5/8 ). 16. Lcate the upper cntrl arm (smaller), male end (smaller, straight), and hardware kit Assemble flex end int upper cntrl arm. Use hardware kit 168 and attached instructins (2 3/8 ). 18. Apply a light cat f anti-seize cmpund t the threads, thread male ends int cntrl arms. 19. Adjust cntrl arm lengths per the chart. 20. Install clamping blts. D nt tighten at this time Cntrl arm munting subframe: 21. Lift frnt and rear f vehicle and supprt with jack stands under the uniframe. Leave rm t cut ff the stck lwer cntrl arm munts. 22. Remve the fur transmissin munt nuts frm the transmissin. 23. Raise transfer case slightly and supprt with a jack stand. 24. Remve the factry transmissin munting crssmember. Cntrl Arm Length (Starting Lengths - Center t Center) Lift Height LCA UCA / /8 37 1/ /2 37 1/ /8 37 3/ /4 RIGHT OUTER LEFT OUTER CENTER SECTION

4 25. Using a stud puller, remve the tw crssmember munting studs. If yu d nt have a stud puller, yu can install 2 nuts and tighten ne against the ther then remve using a bx end wrench n the inner nut. 26. Drill and tap the third munting hle n each side (the next hle directly frward frm the tw crssmember munting hles) using the 23/64 (.359 diameter) drill bit and 7/16-14 hand tap. Use plenty f il during drilling and tapping and keep the drill bit and tap as straight as pssible. 27. Install upper cntrl arm int left subframe uter. Make sure the threaded male end is installed in the subframe using the M14 x 90 blt and the arm is riented with the bend hanging dwn t clear the flr. Blt faces frm center ut s it can be remved later if needed. 28. Install subframe uter in vehicle using M10 flange and 7/16 blts, and washers frm hardware kit Install right subframe uter using the same hardware. 30. *2000 and 2001 w/aut trans nly* Remve trans islatr munt. Grind ff lcating pin frm munting plate. Install lder style trans munt. Trque t 78 ft-punds. 31. Using M10 x 25 carriage blts, 3/8 washers, and M10 nuts, lsely assemble the subframe center sectin t the uters (center sectin underneath the uters). ***The text side f the center sectin face frward when installed in the vehicle.*** 32. Trque 7/16 blts t 65 ft punds. Trque M10 blts t 50 ft punds. 33. Trque subframe center sectin blts t 45 ft punds. 34. Trque upper cntrl arm blt at uniframe t 135 ft punds. 35. Lwer the transfer case n t the subframe. 36. Install the fur transmissin munt nuts and trque t 15 ft punds. Frnt Suspensin: 37. Lift frnt f vehicle and supprt with tall jack stands under the unibdy frame r lng arm subframe. 38. Ensure the vehicle is safely supprted. 39. Place a flr jack under the frnt axle fr supprt, d nt lift vehicle. 40. Remve the frnt shcks. 41. Remve the track bar and munting bracket at unibdy. N need t separate track bar frm bracket. 42. Remve frnt sway bar links. 43. On ne side, remve the blt that hlds the brake hse t the unibdy. 44. Any rusted, wrn, cracked, r damaged rubber r steel brake line shuld be replaced. 45. Pull brake line dwn as far as pssible withut ver-stressing r causing a kink in the line. *Nte: Yur brake line may appear different frm the pht. D nt pull t far and damage the brake line. 46. Using tw adjustable wrenches bend brake line bracket munting surface s brake line pints ut tward the brake caliper. See pht. 47. Mark lcatin and drill a 1/4 hle fr the brake line lcating tab. 48. Fasten brake line t unibdy using prvided self drilling sheet metal screw. 49. Repeat fr ther side. 50. Remve upper and lwer factry cntrl arms. 51. Discnnect the driveshaft n the axle side and tape the u-jint s the caps d nt fall ff. Tie the driveshaft ut f the way (use tape, zip tie, mechanic s wire, etc ) fr easier access t the lwer cntrl arm munt. 52. Tie the upper cntrl arm ut f the way. 53. Cut ff factry lwer cntrl arm munts frm the uniframe n the driver s and passenger's side. 54. ***Tip: Our favrite tl fr this is a 4 ½ angle grinder with a thin cutting wheel. Remve in pieces fr ease f access.*** 55. Remve anything n the driver s side that extends inward (tward the transmissin) beynd the uniframe. D nt remve any f the uniframe; just make ne cntinuus edge frm frnt t rear. 56. Clean up any burrs r sharp edges and grind smth fr an attractive appearance. 57. Clean, prime, and paint any expsed metal. 58. Cnnect the upper cntrl arm t the axle using M10 x 80 blt with washer and nylck flange nut. D nt tighten at this time. 59. Install lwer cntrl arms (axle end first) with threaded adjusting end at the uniframe, and bends facing inward t clear the tires, thread clamping blts facing dwn. Use prvided M14 x 100 blts (at axle), M14 x 110 blts (at subframe), 9/16 washers, and nylck nuts. D nt tighten at this time. 60. Install new springs in vehicle being careful t align the springs t the spring buckets n the axle. 61. Using a flr jack lift the frnt axle just enugh t apply sme lad t the cil springs, d nt lift vehicle. 62. Lcate frnt track bar, track bar munting bracket, and hardware kit 20.

5 63. Install the track bar bracket nt the unibdy with the factry blts. Lsely attach the bracket with the upper tw blts, then align the lwer blt munting hles. Install the lwer munting blts and trque all track bar bracket hardware t 92 ft. lbs. ***NOTE: If the unibdy is rusty, the seam behind the factry bracket may have swelled making installatin f the lwer munting blts difficult. Using a ratchet strap t pull the bracket t align the hles r smthing the seam with a hammer is recmmended. 64. Install the track bar and trque blt at axle t 74 ft. lbs., and blt at bracket t 80 ft. lbs. If necessary use a flr jack and/r the steering wheel t help align the track bar. 65. Raise vehicle slightly and repsitin jack stands under the frnt axle. 66. Re-install cil spring retainer clamps. 67. Install new frnt shcks using riginal barpin blts. Tighten upper stud munt nuts just enugh t slightly cmpress the bushings. Over cmpressing these bushings will result in damage t the bushings and premature bushing failure. 68. Lcate frnt sway bar links (10.75 center t center), tw u-brackets, and the remainder f hardware kit Install sway bar link u-brackets t the sway bar using 1/2 x 1 1/2 grade 8 hex blts, lck washers, and nuts. Brackets munt t the bttm f the sway bar with the blt facing up and the lck washer and nut n tp f the sway bar. Rtate the bracket s it is ffset away frm the center f the vehicle. Align brackets, trque blts t 80 ft punds. 70. Install sway bar links driver s side first using prvided M12 x 70mm class 10.9 hex blt and nut thrugh the u-bracket with the nuts tward the utside f the vehicle, and the riginal blt, nut, and washer at the axle. Tighten all blts t 78 ft punds. 71. Ensure that vehicle is safely supprted. 72. Any remaining lse blts will be trqued after rear suspensin installatin and with full vehicle weight n the suspensin. Rear Suspensin: 73. Lift rear f vehicle and supprt with tall jack stands under the unibdy frame. **TIP: break lug nuts lse befre lifting vehicle. 74. Ensure that the vehicle is safely supprted. 75. Remve rear tires. 76. Remve rear shcks. 77. Allw suspensin t drp as much as pssible. 78. Remve retaining clip frm rear brake line at the unibdy. 79. Push the brake line frward until it can be pulled dwn ut f the bracket. 80. Install rear brake line bracket using 5/16 x 1 blt, nut, and 2 washers. Bracket shuld be riented t extend the brake line dwn and back. 81. Gently bend the steel brake line int its new lcatin in the bracket. Be very careful t nt create a crack r a kink. Any rusted, wrn, cracked, r damaged rubber r steel brake line shuld be replaced. 82. Install brake line retaining clip. If replacing leaf springs: (if installing add-a-leaf kit prceed t step 93) 83. Starting with the driver s side: place a flr jack under the driver s side f the rear axle fr supprt (d nt lift vehicle). 84. Remve leaf spring blts at unibdy and shackle. 85. Remve the u-blts. 86. Allw axle t drp and remve leaf spring. 87. Install new leaf spring. 88. Install frnt blt and rear blts but d nt tighten yet. 89. Clean any debris frm axle seating surfaces. 90. Raise the axle up t the leaf spring, make sure the center pin drps int the axle and the axle seats flat against the leaf spring. Install u-blts. 91. With the vehicles weight n the suspensin, trque U-blts t 90 ft punds and re-trque after 100 miles. 92. Repeat fr passenger side. If installing add-a-leaf kit: 93. Starting with the driver s side, remve u-blts. 94. Allw axle t drp and remve leaf spring clamps and center pin t take apart the leaf spring pack. Nte rientatin f leaves. 95. Install the new highly arched leaf in the spring pack (directly under main leaf in the #2 spt) with the lng end f leaf twards the rear f the vehicle. Use a c-clamp r tw t help install the new center pin. 96. Tighten leaf spring centering pin. 97. Use a c-clamp r tw t help install new leaf spring clamps. 98. Clean any debris frm axle seating surfaces. 99. Raise the axle up t the leaf spring, make sure the center pin drps int the axle and the axle seats flat against the leaf spring. Install u-blts With the vehicles weight n the suspensin, trque U-blts t 90 ft punds and re-trque after 100 miles Repeat fr passenger side Install rear brake line Grease lwer shck studs, apply anti-seize t upper blts and install rear shcks using riginal hardware Trque lwer shck blts t 46 ft punds Trque upper shck barpin blts t 17 ft punds Install rear tires Lwer vehicle frm jack stands With the vehicle n the grund, trque leaf spring and shackle blts t 120 ft punds. Final Trque: 109. With the weight f the vehicle n the springs, trque any lse blts t spec Trque all frnt lwer cntrl arm nuts t 135 ft punds Trque upper cntrl arm nut at axle t 60 ft punds Tighten track bar jam nut very tight Trque any remaining lse blts t spec.

6 114. Install tires and place the vehicle n the grund Trque lug nuts t spec. ( ft punds depending n yur wheels) Adjustments and Final Inspectin: 116. Check all cmpnents fr clearance fr suspensin t fully cycle up and dwn and wheels t turn lck t lck. Pay special attentin t brake lines, axle vent hses, and ABS wires. Repsitin as needed by bending the brackets, relcating, r extending hses and wiring. * A prfessinal frnt end alignment is required after installatin. We recmmend the fllwing alignment settings: Caster: t (+4.5 is preferred if pssible) Te-in: +1/16 t +1/8 89. Check caster angle. Using a laser level r string level, set the frnt axle level t the rear axle (left side and right). Bunce the Jeep up and dwn t ensure the suspensin is in resting psitin (at exact ride height). Place the angle finder under the axle "C" (r n tp f the upper ball jint). Ensure the angle finder is parallel t the Jeep frnt t rear. This is yur caster angle. 90. Recheck all fasteners and trque any remaining lse nuts r blts t spec. Final Safety Warning: * Re-trque all fasteners after 100 miles, and frequently inspect all safety critical suspensin cmpnents. It is the respnsibility f the installer t be sure all fasteners are prperly tightened after installatin and t ensure the wner knws his/her nging respnsibility. It is the respnsibility f the wner f the vehicle t be sure all safety critical cmpnents are inspected frequently, especially after ff rad r ther demanding use.

7 Fits All Irn Rck Off Rad Lng Arm Systems, WJ A-Arms, and Build Yur Own Flex End Assemblies. 2-5/8 IRO Flex End (6 blt) Assembly Instructins Befre yu begin: Read and understand installatin instructins. Cntact Irn Rck Off Rad with any questins befre, during, r after installatin. Ensure that all parts are present and in gd cnditin per attached shipping checklist! Have these tls handy: 5/32" allen head scket 3/8" pen end wrench Inch-lb. trque wrench Multipurpse grease/grease gun Parts Checklist: Outer husing, weld n (may already be attached t yur existing cntrl arm) # /8 IRO Flex End (6 blt) 2-5/8" flex end race (2) Thrust washer (2) 2-5/8" flex end ball (1) #10-32 nylck nut (7) #10-32 x 1-3/4" scket head cap screw (6) 90 ¼ -28 grease zerk fitting (1) Assembly: Figure 1 1. Insert tw #10-32 scket head cap screws int ne thrust washer and ne plastic race. Spherical bre f race facing away frm thrust washer. (Figure 1) 2. Install this small assembly int the flex end husing. The races are a light press fit, use a wide punch and hammer t assist yu if needed. 3. Apply a thin cating f multi-purpse grease t the mating surfaces f the ball and bth races. 4. Place the ball in the race (inside the flex end). The ball shuld perfectly fit the cntur f the race. (Figure 2) 5. Insert the ther race nt the ball s that the spherical bre is cntacting the ball. Once again, the races are a light press fit, use a hammer and wide punch if needed. (The tw screws shuld be thrugh ne washer and bth races at this pint) 6. Insert the secnd thrust washer n tp f the flex end husing, sliding the blts thrugh the hles. (Figure 3) 7. Start nylck nuts n the tw blts that are in the flex end assembly. Hld the nut and turn the blt. 8. Insert the remaining fur cap screws thrugh the remaining hles and install nuts. (Figure 4) 9. Snug up all f the blts fairly tight. 10. Trque blts evenly, starting at ne blt and cntinuing using a crisscrss pattern. Trque all six blts t 70 in-lbs., then t 85 in-lbs. Figure Install 90 grease zerk fitting s that it is easily accessed in the vehicle. 12. Grease flex end until grease cmes ut f the races arund the ball. 13. Re-trque blts t 85 in-lbs. after 5 minutes. *Reference Only* Cmplete jint shwn fully assembled withut husing Figure 3 Figure 4

8 XJ Plyurethane Leaf Spring Bushing Installatin Shipping Checklist: Hardware Kit # 72 Instructins Main Eye Leaf Spring Bushings (4) M20774 Leaf Spring Shackle Bushings (4) M20775 Main Eye Bushing Sleeve (2) Shackle Bushing Sleeve (2) Installatin Instructins: Befre yu begin: Read and understand installatin instructins. Cntact Irn Rck Off Rad with any questins befre, during, r after installatin. Ensure that all parts are present and in gd cnditin per attached shipping checklist. Yu will need basic wheel bearing multi-purpse grease and a brush. Bushing Installatin: 1. Lcate main eye bushings (M20774) and main eye bushing sleeves (M20775) and separate frm ther parts. 2. Liberally apply grease t the inside f the leaf spring main eye bushing pening. 3. Apply grease t bushing halves n mating surface and sleeves. 4. Press ne bushing half int main eye bushing pening. 5. Press the ther bushing half int the main eye bushing pening n the ppsite side f the first half. 6. Apply grease t the bushing sleeve and slide it int the tw bushing halves. 7. Mimic the main eye installatin fr the shackle bushings using shrtest sleeves and thinner flange bushing halves.

9 2-3/8 IRO Flex End (8 blt) Assembly Instructins Befre yu begin: Read and understand installatin instructins. Cntact Irn Rck Off Rad with any questins befre, during, r after installatin. Ensure that all parts are present and in gd cnditin per attached shipping checklist! Have these tls handy: 9/64" allen head scket 3/8" pen end wrench Inch-lb. trque wrench Multipurpse grease/grease gun Parts Checklist: Outer husing, weld n (may already be attached t yur existing cntrl arm) # /8 IRO Flex End (8 blt) Inner race (2) Thrust washer (2) Ball (1) #8-32 x 1-1/2 scket head cap screw (8) 90 ¼ -28 grease zerk fitting (1) Figure 1 Assembly: 1. Insert tw #8-32 scket head cap screws int ne thrust washer and ne plastic race. Spherical bre f race facing away frm thrust washer. (Figure 1) 2. Install this small assembly int the flex end husing. The races are a light press fit, use a wide punch and hammer t assist yu if needed. 3. Apply a thin cating f multi-purpse grease t the mating surfaces f the ball and bth races. 4. Place the ball in the race (inside the flex end). The ball shuld perfectly fit the cntur f the race. 5. Insert the ther race nt the ball s that the spherical bre is cntacting the ball. Once again, the races are a light press fit, use a hammer and wide punch if needed. (The tw screws shuld be thrugh ne washer and bth races at this pint) 6. Insert the secnd thrust washer n tp f the flex end husing, sliding the blts thrugh the hles. 7. Start nylck nuts n the tw blts that are in the flex end assembly. Hld the nut and turn the blt. 8. Insert the remaining fur cap screws thrugh the remaining hles and install nuts. 9. Snug up all f the blts fairly tight. 10. Trque blts evenly, starting at ne blt using a crisscrss pattern, like trqueing lug nuts. Trque all eight blts t 50 in-lbs., then t 65 in-lbs. 11. Install 90 grease zerk fitting s that it is easily accessed in the vehicle. 12. Grease flex end until grease cmes ut f the races arund the ball. 13. Re-trque blts t 65 in-lbs. after 5 minutes. *Reference Only* Cmplete jint shwn fully assembled withut husing

Parts Checklist: ZJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* *BOX 2* Jeep Grand Cherokee ZJ

Parts Checklist: ZJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* *BOX 2* Jeep Grand Cherokee ZJ ZJ Frnt 3-Link Lng Arm Upgrade Installatin Instructins 93-98 Jeep Grand Cherkee ZJ Parts Checklist: *BOX 1* Instructins Invice Lg decal 10001 (Qty: 1) Rck-Link decal 13287 (2) Irnrckffrad.cm decal (1)

More information

Parts Checklist: XJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* *BOX 2* Jeep Cherokee XJ

Parts Checklist: XJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* *BOX 2* Jeep Cherokee XJ XJ Frnt 3-Link Lng Arm Upgrade Installatin Instructins 84-01 Jeep Cherkee XJ Parts Checklist: *BOX 1* Instructins Invice Lg decal 10001 (1) Rck-Link decal 13287 (2) Irnrckffrad.cm decal (1) Subframe center

More information

Parts Checklist: WJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* (1) *BOX 2* (1) Jeep Grand Cherokee WJ

Parts Checklist: WJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* (1) *BOX 2* (1) Jeep Grand Cherokee WJ Parts Checklist: *BOX 1* 13319 (1) Instructins Lg decal 10001 (Qty: 1) Rck-Link Decal 13287 (2) Irnrckffrad.cm decal (1) Subframe center 92270 (1) Subframe left uter 92256 (1) Subframe right uter 92275

More information

XJ 4 Rock-Link Long Arm Lift Kit Instructions XJ Jeep Cherokee

XJ 4 Rock-Link Long Arm Lift Kit Instructions XJ Jeep Cherokee Parts Checklist: *BOX 1* 33x17x8 Instructins Rck-Link decal 13287 (2) Irn Rck Off Rad lg decal 10001 (2) Irnrckffrad.cm decal (1) XJ/ZJ Adjustable duble shear track bar 92185 (1) Track bar male threaded

More information

XJ 4-Link Rear Long Arm Instructions

XJ 4-Link Rear Long Arm Instructions Parts Checklist: Instructins Irn Rck Off Rad Decal - (2) Rck-Link Decal 13287 - (2) irnrckffrad.cm Decal - (1) Crssmember - 991162 - (1) Shck crssmember - 91173 - (1) Shck crssmember spacer - 91178 - (2)

More information

WJ 6.5 Critical Path Lift Kit Installation Instructions

WJ 6.5 Critical Path Lift Kit Installation Instructions WJ 6.5 Critical Path Lift Kit Installatin Instructins Parts Checklist: *BOX 1* 24x12x12 6.5 Frnt spring 96008 (2) 6.5 Rear spring 96009 (2) *BOX 2* 24x14x6 Literature (instructins, steering shimmy checklist,

More information

03-06 TJ Long Arm Upgrade Instructions

03-06 TJ Long Arm Upgrade Instructions Parts List: Instructins Irn Rck Off Rad lg decal (2) Irnrckffrad.cm decal (1) Belly skid plate 85046 (1) Left lng arm frame munt 85121 (1) Right lng arm frame munt 85122 (1) Left LCA munt gusset plate

More information

WJ 6.5 Premium Long Arm Kit Installation Instructions

WJ 6.5 Premium Long Arm Kit Installation Instructions WJ 6.5 Premium Lng Arm Kit Installatin Instructins Parts Checklist: *BOX 1* 24x12x12 6.5 Frnt spring 96008 (2) 6.5 Rear spring 96009 (2) *BOX 2* 24x14x6 Literature (instructins, steering shimmy checklist)

More information

TJ Long Arm Lift Kit Instructions

TJ Long Arm Lift Kit Instructions Parts List: Instructins Irn Rck Off Rad lg decal (2) Irnrckffrad.cm decal (1) Belly skid plate 85046 (1) Left lng arm frame munt 85104 (1) Right lng arm frame munt 85105 (1) Left LCA munt gusset plate

More information

ZJ 4-Link Rear Long Arm Upgrade Instructions

ZJ 4-Link Rear Long Arm Upgrade Instructions Parts Checklist: Instructions Iron Rock Off Road logo decal (Qty: 1) Rock-Link decal 13287 (2) ironrockoffroad.com Decal (1) Crossmember 99118 (1) 3/16 steel brake line tubing (5 feet) Coil spring retainer

More information

READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION!

READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION! www.fabtechmtrsprts.cm 4331 EUCALYPTUS AVE ~~ CHINO, CA 91710 PHONE 909-597-7800 ** FAX 909-597-7185 1994-2001 DODGE RAM 1500 & 2500 4 WHEEL DRIVE FTS3400-50 FRONT DUAL SHOCK SYSTEM PARTS LIST: 1 EA. FT3400-50-100P

More information

Tools Required. Installation. Step 1. Headlight lense removal (Driver's side shown, Passenger side similar)

Tools Required. Installation. Step 1. Headlight lense removal (Driver's side shown, Passenger side similar) Tls Required Phillips Screw Driver (crner lamps) Flat Head Screw Driver (ptinal fr headlight cver) Pliers (handy t have) Electrical Tape Sturdy Cpper Wire (t use as a wire fish) 10mm Scket r Wrench (grund

More information

REMOTE GREASING KIT FOR MORGANS SERIES 2

REMOTE GREASING KIT FOR MORGANS SERIES 2 Fitting Instructins REMOTE GREASING KIT FOR MORGANS SERIES 2 Thank yu fr purchasing a Remte Greasing Kit fr yur Mrgan. These fitting instructins shuld enable yu t fit the kit t yur Mrgan. Depending n which

More information

PV-70 Remotely Operated Cryogenic Globe Valve Installation, Operation, and Maintenance Manual

PV-70 Remotely Operated Cryogenic Globe Valve Installation, Operation, and Maintenance Manual PV-70 Remtely Operated Crygenic Glbe Valve Installatin, Operatin, and NOTIC: Printed cpies are uncntrlled. Page 1 f 12 TABL OF CONTNTS 1. INSTALLATION... 2 2. OPRATION... 4 3. MAINTNANC... 4 4. PRSSUR

More information

PSS INSTALLATION INSTRUCTIONS

PSS INSTALLATION INSTRUCTIONS PSS INSTALLATION INSTRUCTIONS Imprtant - Read Befre Starting! Befre starting yur installatin carefully read the fllwing warnings and instructins. Failure t prperly fllw the warnings and instructins culd

More information

A very common arrangement for oil lubricated stern tube bearings. A simplex seal arrangement is fitted to both inner and outer ends.

A very common arrangement for oil lubricated stern tube bearings. A simplex seal arrangement is fitted to both inner and outer ends. Simplex shaft seal A very cmmn arrangement fr il lubricated stern tube bearings. A simplex seal arrangement is fitted t bth inner and uter ends. The replaceable chrme liner prevents damage t the prp shaft

More information

GM

GM FORM#3492.03-030317 PRINTED IN U.S.A. PAGE 1 OF 30 2007-2017 GM 1500 6.5 INSTALLATION INSTRUCTIONS MAKE SURE YOU HAVE THE CORRECT LIFT FOR YOUR VEHICLE: General Mtrs has three (3) Different Upper Cntrl

More information

GENUINE ACCESSORIES INSTALLATION INSTRUCTIONS SECURITY SYSTEM KIT CONTENTS SHOCK SENSOR F-D15 WINDOW DECAL (QTY 2) F-D16

GENUINE ACCESSORIES INSTALLATION INSTRUCTIONS SECURITY SYSTEM KIT CONTENTS SHOCK SENSOR F-D15 WINDOW DECAL (QTY 2) F-D16 GENUINE ACCESSRIES INSTALLATIN INSTRUCTINS PART NUMBER: 0000-8F-N03 NTE: NT CMPATIBLE WITH REMTE START SYSTEM, PART# 0000-8F-N02 SECURITY SYSTEM KIT CNTENTS APPLICABLE MDELS: 2007>MAZDA CX-9 WITHUT ADVANCED

More information

Signature Series Vehicles C6 A6 Installation Guidelines

Signature Series Vehicles C6 A6 Installation Guidelines STāSIS Engineering Signature Series Vehicles C6 A6 Installatin Guidelines Table f Cntents Page Trque specs 3 Suspensin Frnt and Rear Suspensin, Turing 4 Braking Optinal Brake Kit 16 Bed-In Prcedure 21

More information

Mini H1 Twin Kit - Installation Instructions

Mini H1 Twin Kit - Installation Instructions Intrductin: Thanks fr purchasing the Mini H twin kit! Yu are very clse t imprve yur lightning nw :) Please read this manual carefully. Feel free t cntact us r visit ur Facebk cmmunity; Eurpean Headlight

More information

General Faucet Installation Instructions

General Faucet Installation Instructions General Faucet Installatin Instructins Step 1: Psitin the Faucet Begin installing yur faucet by placing the gasket and faucet in psitin n the sink. (Diagram A) Frm under the sink, thread the plastic munting

More information

BioWave Hydro DI-9200 User Manual

BioWave Hydro DI-9200 User Manual BiWave Hydr DI-9200 User Manual Assembling Hydr DI 9200: Assembling yur BiWave Hydr DI 9200, is a very shrt and simple prcess. All yu have t d is take the Hydr DI 9200 ut f the bx, make sure its standing

More information

CAUTION: Do not install damaged parts!!!

CAUTION: Do not install damaged parts!!! Yur satisfactin is imprtant t us, please let us help! If yu have any questins r cncerns during the installatin, ur supprt representatives are available t assist yu. Please call: 1-877-769-3765 r Live Chat

More information

{EMS Shock} Student Name: Period:

{EMS Shock} Student Name: Period: {EMS Shck} Student Name: Perid: 5 th Grade Engineering Pulleys Unit Rubric Lab #0016 Pulley Frame Pulley Frame: Student cnstructed the Pulley Frame t lab specificatins. Pulley Frame was nt apprved 0 pints

More information

Installation Guide Contigo 6100

Installation Guide Contigo 6100 Installatin Guide Cmmercial Vehicle Prductivity and Security The is a high-perfrmance beacn designed fr cmmercial prductivity and security. It is ideally suited t installatins in delivery and service fleets

More information

;THI~~Sf\-FEJY _.:.. ;'..»...

;THI~~Sf\-FEJY _.:.. ;'..»... 45 -CHAPTER......... j...,.. 8 ~\..- ;THI~~Sf\-FEJY _.:.. ;'..».......,. np;,llf I~~yeantlfreez~in ah'penc8ntaiil~rr spllledq.l,1thefi()r ~~erifit:p1ightbe acc;~ss:lblle.i t children r ariimals.antifreezeis'txic

More information

Installation Instructions AQ-5100, AQ-5200 & AQ-5300 Under Counter Water Filter Single Stage (5100), Two Stage (5200) and Three Stage (5300) systems

Installation Instructions AQ-5100, AQ-5200 & AQ-5300 Under Counter Water Filter Single Stage (5100), Two Stage (5200) and Three Stage (5300) systems Live Healthy s ' p V iv Installatin Instructins AQ-5100, AQ-5200 & AQ-5300 Under Cunter Water Filter Single Stage (5100), Tw Stage (5200) and Three Stage (5300) systems Welcme t the Aquasana experience.

More information

Installation instructions: 13 Pin Electrical system for towing hitch

Installation instructions: 13 Pin Electrical system for towing hitch General data Part number Westfalia Vehicle Manufacturer Vehicle 321 538 300 153 ZGB 1T0 055 204 Vlkswagen Turan MY 2003> 321 538 391 105-005 - 33/07 Imprtant ntes Read the installatin manual prir t starting

More information

INSTALLATION INSTRUCTIONS FOR PART #20010 RT1/RT2/DOM WATER / METHANOL INJECTION SYSTEMS

INSTALLATION INSTRUCTIONS FOR PART #20010 RT1/RT2/DOM WATER / METHANOL INJECTION SYSTEMS Kit Cntents INSTALLATION INSTRUCTIONS FOR PART #20010 RT1/RT2/DOM WATER / METHANOL INJECTION SYSTEMS Parts UHO Pump (Special High Output) 3 Qt Reservir 10 Ft High Pressure Tubing 3 Ft Wire Lm 18 1/8 Silicne

More information

GLOBAL LIFT CORP. Owner s Manual. Rotational Series R-375

GLOBAL LIFT CORP. Owner s Manual. Rotational Series R-375 GLOBAL LIFT CORP Owner s Manual Rtatinal Series R-375 684 N Prt Crescent Rd Suite C Bad Axe, MI 48413 Tll Free: 866-712-0606 Fax: 989-269-5902 www.glballiftcrp.cm Page 1 ROTATIONAL SERIES POOL LIFTS R-375

More information

72 Mustang Mach 1 tachometer cluster and gauge conversion

72 Mustang Mach 1 tachometer cluster and gauge conversion 72 Mustang Mach 1 tachmeter cluster and gauge cnversin Dated: 02-17-2009 (drafted by a Chevy persn wrking n his first Frd -nt gd-) The fllwing infrmatin pertains t hw I went abut cnverting the standard

More information

INSTALLATION INSTRUCTIONS FOR PART #47002 WATER / METHANOL INJECTION SYSTEM UNIVERSAL TURBO DIESEL

INSTALLATION INSTRUCTIONS FOR PART #47002 WATER / METHANOL INJECTION SYSTEM UNIVERSAL TURBO DIESEL Kit Cntents INSTALLATION INSTRUCTIONS FOR PART #47002 WATER / METHANOL INJECTION SYSTEM UNIVERSAL TURBO DIESEL Parts UHO Pump (Ultra High Output) 3 Qt Reservir 10 ft High Pressure Tubing 3 ft Black Wire

More information

ANNEX A Descriptions and Photos

ANNEX A Descriptions and Photos ANNEX A Descriptins and Phts Cmpnent One: Hrizntal autclave with biler The autclave is designed t treat infectius waste by expsure t steam at temperature f up t 130ºC and abut 1.7 bars. The autclave has

More information

VYLEATER DAILY HOUSEKEEPING & PREVENTATIVE MAINTENANCE PROCEDURES. Follow these procedures to keep your Vyleater running smoothly.

VYLEATER DAILY HOUSEKEEPING & PREVENTATIVE MAINTENANCE PROCEDURES. Follow these procedures to keep your Vyleater running smoothly. VYLEATER DAILY HOUSEKEEPING & PREVENTATIVE MAINTENANCE PROCEDURES! WARNING! Failure t fllw these prcedures may cause an verlad cnditin that culd result in the Vyleater becming severely damaged. Fllw these

More information

Safety Rules. Danger Failure to obey the instructions and safety rules in this manual will result in death or serious injury. Do Not Operate Unless:

Safety Rules. Danger Failure to obey the instructions and safety rules in this manual will result in death or serious injury. Do Not Operate Unless: Third Editin First Printing Operatr's Manual Safety Rules Danger Failure t bey the instructins and safety rules in this manual will result in death r serius injury. D Nt Operate Unless: Yu learn and practice

More information

DriveCam Unit Installation Instructions

DriveCam Unit Installation Instructions DriveCam Unit Installatin Instructins Installatin f the DriveCam Unit is nt cmplicated, thugh care must be taken t avid specific prblems. Sme vehicles require additinal cnsideratin t determine the ptimum

More information

INSTALLATION & USER S GUIDE

INSTALLATION & USER S GUIDE REKLUSE MOTOR SPORTS The Rekluse EXP Clutch OVERVIEW INSTALLATION & USER S GUIDE Dc ID: 191-6000 Manual Revisin: 050514 This kit will replace sme f the OEM frictins and drive plates with the EXP disk.

More information

GLOBAL LIFT CORP. Owner s Manual. Superior Series Proformance Series S-350 / P-375

GLOBAL LIFT CORP. Owner s Manual. Superior Series Proformance Series S-350 / P-375 GLOBAL LIFT CORP Owner s Manual Superir Series Prfrmance Series S-350 / P-375 684 N Prt Crescent Rd Suite C Bad Axe, MI 48413 Tll Free: 866-712-0606 Fax: 989-269-5902 www.glballiftcrp.cm Page 1 SUPERIOR

More information

INSTALLATION INSTRUCTIONS FOR PART #20001 FORCED INDUCTION BOOST COOLER WATER / METHANOL INJECTION SYSTEMS

INSTALLATION INSTRUCTIONS FOR PART #20001 FORCED INDUCTION BOOST COOLER WATER / METHANOL INJECTION SYSTEMS INSTALLATION INSTRUCTIONS FOR PART #20001 FORCED INDUCTION BOOST COOLER WATER / METHANOL INJECTION SYSTEMS Parts UHO (Ultra High Output) Pump 3 Qt Reservir 10 ft High Pressure Tubing 3ft Wire Lm 18 1/8

More information

XX FORD F-150 REAR BUMPER INSTALLATION INSTRUCTIONS SAFETY

XX FORD F-150 REAR BUMPER INSTALLATION INSTRUCTIONS SAFETY 2015-20XX FORD F-150 REAR BUMPER INSTALLATION INSTRUCTIONS SAFETY Knw safety, n injury. Knw injury, n safety. ~Authr Unknwn If there are any questins, call 1-855-HHTOUGH READ ALL SAFETY INSTRUCTIONS BEFORE

More information

You have a Chiller, Now What?

You have a Chiller, Now What? Yu have a Chiller, Nw What? Raschell Hickmtt Reginal Sales Manger Dimplex Thermal Slutins Klant Klers Brand Chillers Agenda This presentatin is develped t be a very brief and generic intrductin t anyne

More information

Solvent Filter. What is a Solvent Trap, Solvent Recycler or Solvent Filter? Why use a solvent filter? Why is the HIT Solvent Filter better?

Solvent Filter. What is a Solvent Trap, Solvent Recycler or Solvent Filter? Why use a solvent filter? Why is the HIT Solvent Filter better? Slvent Filter What is a Slvent Trap, Slvent Recycler r Slvent Filter? It is a device attached t the end f a threaded barrel that cllects all f the slvent and debris as it is cleaned frm the barrel and

More information

SERVICE FACTORY DIRECTED MODIFICATION MC IMMEDIATE INSPECTION REPAIR ONLY AS REQUIRED ENGINE PULLEY WEAR

SERVICE FACTORY DIRECTED MODIFICATION MC IMMEDIATE INSPECTION REPAIR ONLY AS REQUIRED ENGINE PULLEY WEAR SERVICE REPLACES: Please discard MC 06-07 dated June 27, 2006 MODEL: 2004-2005 VULCAN 2000 (VN2000-A1/L-A2/L) MC 06-07 Date: July 28, 2006 First Issued: June 27, 2006 Page 1 f 7 TITLE: ENGINE PULLEY WEAR

More information

PRAIRIE 360 4X4 (KVF360-A/C), PRAIRIE 360 2X4 (KVF360-B), PRAIRIE 650 4X4 (KVF650-A/B), PRAIRIE 700 4X4 (KVF700-A/B/D),

PRAIRIE 360 4X4 (KVF360-A/C), PRAIRIE 360 2X4 (KVF360-B), PRAIRIE 650 4X4 (KVF650-A/B), PRAIRIE 700 4X4 (KVF700-A/B/D), SERVICE REPLACES: Please discard ATV 07-02 dated 4/5/07 MODEL: PRAIRIE 360 4X4 (KVF360-A/C), PRAIRIE 360 2X4 (KVF360-B), PRAIRIE 650 4X4 (KVF650-A/B), PRAIRIE 700 4X4 (KVF700-A/B/D), KFX700 (KSV700-A/B/C),

More information

GLOBAL LIFT CORP Owner s Manual

GLOBAL LIFT CORP Owner s Manual GLOBAL LIFT CORP Owner s Manual 39 N. Caseville Rad PO Bx 559 Pigen, MI 48755 Tll Free: 866-712-0606 Fax: 989-453-3050 www.glballiftcrp.cm Page 1 COMMERCIAL SERIES POOL LIFTS C-350 ~ C-450 ~ C-550 TABLE

More information

Model: TM-3 INSTALLATION AND OPERATION INSTRUCTIONS

Model: TM-3 INSTALLATION AND OPERATION INSTRUCTIONS 120 Mdel: TM-3 INSTALLATION AND OPERATION INSTRUCTIONS IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS DO NOT ATTEMPT TO INSTALL OR OPERATE INTRODUCTION This Wired Wall Timer system was

More information

EDBRO RIGID INCLINOMETER

EDBRO RIGID INCLINOMETER EDBRO RIGID INCLINOMETER RINC01 Installatin & Operating Instructins E5542 rev 1 (June 2010) Edbr PLC Nelsn Street, Bltn BL3 2JJ UK Tel: +44 (0) 120 4528888 Fax: +44 (0) 120 4531957 E-mail: pstmaster@edbr.cm

More information

Advanced 3 Million Wireless USB Limousine Underbody Kit

Advanced 3 Million Wireless USB Limousine Underbody Kit Advanced 3 Millin Wireless USB Limusine Underbdy Kit Warning: Please check yur state and lcal laws befre installing this LED underbdy kit. Every state has different plicies and prcedures in place regarding

More information

Thank you for purchasing a SledLites.com HID system for your snowmobile. Please read all warnings and complete manual prior to installing.

Thank you for purchasing a SledLites.com HID system for your snowmobile. Please read all warnings and complete manual prior to installing. Thank yu fr purchasing a SledLites.cm HID system fr yur snwmbile. Please read all warnings and cmplete manual prir t installing. OFF ROAD USE ONLY ALL SLEDLITES.COM EQUIPMENT IS FOR OFF ROAD USE ONLY ATTENTION

More information

Volume 1.1 OPERATIONAL MANUAL MODEL: CG-211Y PIPE TORCH/BURNER MACHINE. by BLUEROCK Tools

Volume 1.1 OPERATIONAL MANUAL MODEL: CG-211Y PIPE TORCH/BURNER MACHINE. by BLUEROCK Tools Vlume 1.1 OPERATIONAL MANUAL MODEL: CG-211Y PIPE TORCH/BURNER MACHINE by BLUEROCK Tls UNPACKING THE ITEM Cautin: This machine is packed tgether with items that may be sharp, ily and verly heavy bjects.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessry Applicatin Publicatins N. All 24107 AIR CONDITIONER ELEMENT (DX) Issue Date DEC 2002 What s New INSTALLATION The A/C kit and instructins fr the 2003 Element are all new.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessry Applicatin Publicatins N. All 24039 AIR CONDITIONER ACCORD (DX) 4-DOOR Issue Date SEP 2002 What s New The A/C kit and instructins fr the 2003 Accrd are all new. Fllw

More information

C.O.I.S. Technical Data Sheet CAD Operation Installation Specification

C.O.I.S. Technical Data Sheet CAD Operation Installation Specification Literature C.O.I.S. TD CSI 3 part 200 series dcuments 400 series dcuments 600 series dcuments C.O.I.S. Technical Data Sheet CAD Operatin Installatin Specificatin Dcument #409 Issued 08-2007 MODEL 100SS-R

More information

Safe Work Procedure Self-Loading Logging Truck

Safe Work Procedure Self-Loading Logging Truck Safe Wrk Prcedure Self-Lading Lgging Truck PERSONAL PROTECTIVE EQUIPMENT: Adequate ftwear with gd tractin sles Hi-vis hardhat when ut f cab Hi-vis vest when ut f cab Hearing prtectin when driving PROCEDURES:

More information

Trouble Shooting Guide for AFVK-SP Series Valve Kit (AF-4000 Series Gas Valves)

Trouble Shooting Guide for AFVK-SP Series Valve Kit (AF-4000 Series Gas Valves) Truble Shting Guide fr AFVK-SP Series Valve Kit (AF-4000 Series Gas Valves) AFVK-SP, AFVK-SP-H/L, AFVK-SP-MH/L AFVK-SP Series Valve Kit Truble Shting Guide (AF-4000 Series) TABLE OF CONTENTS General Infrmatin

More information

Installation Guide Contigo 6150 & 6151

Installation Guide Contigo 6150 & 6151 Installatin Guide Cntig 6150 & 6151 Cmmercial Vehicle Prductivity and Security The Cntig 6150 & 6151* (cllectively knwn as the Cntig 615X) are highperfrmance beacns designed fr cmmercial prductivity and

More information

HIGH POWER RGB LED SERIES. The HB Series Advantage! Architectural Illumination Systems!

HIGH POWER RGB LED SERIES. The HB Series Advantage! Architectural Illumination Systems! The HB Series Advantage SGS listed cnfirming t UL Standard 2108 & 8750 Certified t CSA Standard C22.2 N.9 LED Life f 50K+ hurs, under nrmal perating cnditins Lw wattage, lw heat, lw vltage (12DVC & 24VDC

More information

Introduction Specifications Structure & Performance Assembly Folding Operation Care & Maintenance...

Introduction Specifications Structure & Performance Assembly Folding Operation Care & Maintenance... n Intrductin... 3 Specificatins... 4 Structure & Perfrmance... 5 Assembly... 6 Flding... 7 Operatin... 8-12 Care & Maintenance... 13-15 2 P a g e Read and fllw all instructins, warnings, and ntes in this

More information

Gearbox Installation Manual

Gearbox Installation Manual Gearbx Installatin Manual Rtrk Gears HOB/MPR & HOS/MPR ranges (Electrnic cpy available n www.rtrk.cm)! This manual cntains imprtant safety infrmatin. Please ensure it is thrughly read and understd befre

More information

Copyright 2015 Maxitrak ltd

Copyright 2015 Maxitrak ltd Cpyright 2015 Maxitrak ltd maxitrak.cm 1 CASE Driving and Maintenance. Sme tips n driving and lking after yur Maxitrak/Accucraft 1 Case tractin engine. Once yu have taken yur mdel frm the packaging it

More information

BC7 BATTERY CABINET INSTALLATION / OPERATION / MAINTENANCE

BC7 BATTERY CABINET INSTALLATION / OPERATION / MAINTENANCE BC7 BATTERY CABINET INSTALLATION / OPERATION / MAINTENANCE 1. INTRODUCTION... 3 2. PRECAUTIONS... 3 3. INSPECTION UPON RECEIPT OF GOODS... 4 3.1 GENERAL... 4 3.2 VISIBLE DAMAGE... 4 3.3 CONCEALED DAMAGE...

More information

WELCOME. WEB LOCATION Los Angeles, CA

WELCOME. WEB   LOCATION Los Angeles, CA WELCOME Thank yu fr chsing AC Infinity. We are cmmitted t prduct quality and friendly custmer service. If yu have any questins r suggestins, please dn t hesitate t cntact us. Visit www.acinfinity.cm and

More information

Audi 8L A3 and B5 A4 ColorMFA Install Guide ColorMFA from AutoPilot. Instructions from Clusters by Litke and pinout from Drive2

Audi 8L A3 and B5 A4 ColorMFA Install Guide ColorMFA from AutoPilot. Instructions from Clusters by Litke and pinout from Drive2 Audi 8L A3 and B5 A4 ClrMFA Install Guide ClrMFA frm AutPilt. Instructins frm Clusters by Litke and pinut frm Drive2 This is an verview guide n hw t install the v3.2/v3.4 ClrMFA units int Audi 8L and B5

More information

E+ Battery Care Guide

E+ Battery Care Guide Electric Mtin Systems, LLC 45150 Business Curt, Suite 300 Dulles, VA 20166 USA E+ Battery Care Guide Welcme! Yur E+ Hub Battery Pack is a pwerful, sphisticated, and imprtant part f yur E+ Electric Bicycle.

More information

Dana Spicer Driveshaft. Installation Guide DSIG-3311 March 2004

Dana Spicer Driveshaft. Installation Guide DSIG-3311 March 2004 Dana Spicer Driveshaft Installatin Guide DSIG-3311 March 2004 Safety Precautins General Safety Infrmatin T prevent injury t yurself and /r damage t the equipment: Read carefully all wners manuals, service

More information

PRE-PLANNING & DELIVERY GUIDE

PRE-PLANNING & DELIVERY GUIDE TM PRE-PLANNING & DELIVERY GUIDE Need Assistance? Call 1-888-329-4847 PRE-DELIVERY Spa Delivery Preparatin Yur spa delivery will arrive CURBSIDE at the specified delivery address yu prvided at the time

More information

MT Pressure Switch INSTALLATION AND OPERATING INSTRUCTIONS. Kaustubha Udyog (Orion Instruments)

MT Pressure Switch INSTALLATION AND OPERATING INSTRUCTIONS. Kaustubha Udyog (Orion Instruments) PRESSURE SWITCHES PRESSURE DIFFERENCE SWITCHES VACUUM SWITCHES Frm 1.5 mbar t 600 bar INSTALLATION AND OPERATING INSTRUCTIONS MT Pressure Switch Cnstructin The pressure switch is hused in a tugh Aluminium

More information

Tips & Technology For Bosch business partners

Tips & Technology For Bosch business partners Tips & Technlgy Fr Bsch business partners Current tpics fr successful wrkshps N. 35/2011 Gasline injectin Invented fr life Lambda sensr Knw-hw frm the market leader Bsch, innvative cmpany and wrld's largest

More information

INSTALLATION & USER S GUIDE

INSTALLATION & USER S GUIDE REKLUSE MOTOR SPORTS The Rekluse Cre EXP Kit OVERVIEW INSTALLATION & USER S GUIDE Dc ID: 191-7743A Dc Rev: 083116 This kit replaces the OEM cre clutch cmpnents with high-quality billet cmpnents designed

More information

Rejuvenation Instructions

Rejuvenation Instructions Rejuvenatin Instructins #521 200A Elbws UPR This NRI cvers the fllwing: Hw t prepare 200amp pre-mlded elbws fr injectin. Hw t install and re-infrce an injectin elbw. Hw t size an injectin elbw t match

More information

PPM-8023 / PPM-8043 JEEP JK SYNERGY STAGE 3 SUSPENSION SYSTEM Version 1

PPM-8023 / PPM-8043 JEEP JK SYNERGY STAGE 3 SUSPENSION SYSTEM Version 1 SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 PPM-8023 / PPM-8043 JEEP JK SYNERGY STAGE 3 SUSPENSION SYSTEM Version 1 GENERAL NOTES: These instructions are also available on our website;

More information

How to Sweat (Solder) Copper Pipe By See Jane DrillTM Copyright 2013, All Rights Reserved

How to Sweat (Solder) Copper Pipe By See Jane DrillTM Copyright 2013, All Rights Reserved Hw t Sweat (Slder) Cpper Pipe By See Jane DrillTM Cpyright 2013, All Rights Reserved Objective T learn hw t attach pieces f cpper pipe by sweating r sldering the metal tgether. This is a helpful skill

More information

'99-03 CHEVROLET/GMC IFS 4WD 6" SUSPENSION SYSTEM P/N INSTALLATION INSTRUCTIONS

'99-03 CHEVROLET/GMC IFS 4WD 6 SUSPENSION SYSTEM P/N INSTALLATION INSTRUCTIONS 1/16/04 '99-03 CHEVROLET/GMC IFS 4WD 6" SUSPENSION SYSTEM P/N. 10-41099 INSTALLATION INSTRUCTIONS NOTE: Each Lift Kit and options to Lift Kits are packaged separately. Therefore, installation procedures

More information

SICO 1800 Single & Dual-Height Stage System A single or dual-height mobile folding stage with carpet or hard tuff-deck surface.

SICO 1800 Single & Dual-Height Stage System A single or dual-height mobile folding stage with carpet or hard tuff-deck surface. SICO 1800 Single & Dual-Height Stage System A single r dual-height mbile flding stage with carpet r hard tuff-deck surface. Features, Advantages & Benefits Deck Cnstructin Cnstructed with durable 5/8 thick

More information

INSTALLATION INSTRUCTIONS 88518

INSTALLATION INSTRUCTIONS 88518 INSTALLATION INSTRUCTIONS 88518 For Rancho Suspension Systems RS6518: 2009 FORD F-150 4WD READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev A IMPORTANT NOTES! WARNING:

More information

BMW M PERFORMANCE SUSPENSION. SUSPENSION SYSTEMS FOR BMW CARS. BA /2017

BMW M PERFORMANCE SUSPENSION. SUSPENSION SYSTEMS FOR BMW CARS. BA /2017 SUSPENSION SYSTEMS FOR BMW CARS. BA-220 05/2017 PRODUCT. BMW M Perfrmance suspensins deliver a sprty flair n every bend and stability up t the driving limits. They prvide the perfect handling prperties

More information

LT-F Compact Treaded All Terrain Surveillance & Inspection Robot

LT-F Compact Treaded All Terrain Surveillance & Inspection Robot Rbts, Parts, and Custm Slutins www.superdridrbts.cm Tll Free: (866) SDRbts Phne: (919) 557-9162 Fax: 775-416-2596 1421 E. Brad Street #101 Fuquay Varina, NC 27526 LT-F Cmpact Treaded All Terrain Surveillance

More information

INSTALLATION INSTRUCTION 88088

INSTALLATION INSTRUCTION 88088 INSTALLATION INSTRUCTION 88088 For Rancho Suspension Systems RS6588 & RS6589: FORD F-150 READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev B IMPORTANT NOTES! WARNING:

More information

FUELS SAFETY BRANCH INFORMATION BULLETIN July 1994

FUELS SAFETY BRANCH INFORMATION BULLETIN July 1994 FUELS SAFETY BRANCH INFORMATION BULLETIN July 1994 Guidelines fr Maintenance and Inspectin Prgrams fr Natural Gas and Prpane Appliances and their Fuel Features In Schls The Ontari Gas Utilizatin Cde states

More information

Heavy Duty Axle Assemblies for the Jeep Wrangler

Heavy Duty Axle Assemblies for the Jeep Wrangler Heavy Duty Axle Assemblies fr the Jeep Wrangler Extreme Duty Tera 60 8 Lug with SlimLck Hubs Extreme Duty Full Flat CRD60 8 Lug Heavy Duty Tera60 5 Lug Unit Bearing Heavy Duty Semi Flat CRD60 5 Lug RHD

More information

INSTALLATION INSTRUCTION 88148

INSTALLATION INSTRUCTION 88148 INSTALLATION INSTRUCTION 88148 Rev C For Rancho Suspension Systems RS6548, RS6549 & RS6550: GM 2500HD, 2500, and 1500HD Trucks READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION

More information

FIRST: Top battery (closest to the arm) SECOND: Middle battery. LAST: Top battery (furthest from arm)

FIRST: Top battery (closest to the arm) SECOND: Middle battery. LAST: Top battery (furthest from arm) Hw t Install the Batteries Hw t Hld the Lamp: The InteliEnergy Lamp selectin switches utilize the same technlgy as cell phnes: Capacitive Tuch. This assures the ultimate in lngevity because there are n

More information

Appointment Plus User Instructions

Appointment Plus User Instructions Appintment Plus User Instructins This dcument prvides the user with instructins fr the Appintment Plus System. Appintment Plus System Features This is a tl fr managing the fllwing: Technician Wrk Frce

More information

MEDMASTER TROFFER Luminaires for MRI/Imaging Suites LED MRIT SERIES

MEDMASTER TROFFER Luminaires for MRI/Imaging Suites LED MRIT SERIES MEDMASTER TROFFER Luminaires fr MRI/Imaging Suites PRODUCT FEATURES: Recessed munt Grid; 2' 2', 2' 4' Nn-ferrus cnstructin safe fr sensitive MRI equipment High-utput, high-cri LED lamp ptins NSF2 rating

More information

3000-series Remote Start System with Keyless Entry. Owner's Guide

3000-series Remote Start System with Keyless Entry. Owner's Guide 3000-series Remte Start System with Keyless Entry Owner's Guide Cngratulatins Cngratulatins n the purchase f yur state-f-the-art remte start system with keyless entry. Reading this Owner s Guide prir

More information

DINAK DWhp 0036 CPD APPLICATIONS MAIN FEATURES MATERIALS AVAILABLE DIAMETERS

DINAK DWhp 0036 CPD APPLICATIONS MAIN FEATURES MATERIALS AVAILABLE DIAMETERS DINAK DWhp DW 2.0 FTG-DWHP2-ENG-100 Twin wall stainless steel mdular duct with inner sealing jint, duble lcking band and intermediate rckwl islatin f 100 kg/m3 f density and 30 mm f thickness APPLICATIONS

More information

Pre-Planning Delivery Guide

Pre-Planning Delivery Guide Pre-Planning Delivery Guide Need Assistance? Call 1-888-768-6772 Pre-Delivery Spa Delivery Preparatin Yur spa delivery will arrive CURBSIDE at the specified delivery address yu prvided at the time f yur

More information

EDBRO TRAILER INCLINOMETER

EDBRO TRAILER INCLINOMETER EDBRO TRAILER INCLINOMETER TINC01 (12V AND 24V VERSIONS) Installatin & Operating Instructins E5541 rev 5 (Sept 2015) Edbr PLC Nelsn Street, Bltn BL3 2JJ UK Tel: +44 (0) 120 4528888 Fax: +44 (0) 120 4531957

More information

PPM-8022 / PPM-8042 JEEP JK STAGE 2 SYNERGY SUSPENSION SYSTEM Version 1

PPM-8022 / PPM-8042 JEEP JK STAGE 2 SYNERGY SUSPENSION SYSTEM Version 1 POLY PERFORMANCE MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 PPM-8022 / PPM-8042 JEEP JK STAGE 2 SYNERGY SUSPENSION SYSTEM Version 1 GENERAL NOTES: These instructions are also available

More information

Tools Needed: Class 8.8 Class MM 55ft/lbs 75ft/lbs 14MM 85ft/lbs 120ft/lbs 16MM 130ft/lbs 165ft/lbs 18MM 170ft/lbs 240ft/lbs

Tools Needed: Class 8.8 Class MM 55ft/lbs 75ft/lbs 14MM 85ft/lbs 120ft/lbs 16MM 130ft/lbs 165ft/lbs 18MM 170ft/lbs 240ft/lbs 921788000 JEEP JK 6 LONGARM Rough Country recommends a certified technician install this system. In addition to these instructions, professional knowledge of disassemble/reassembly procedures as well as

More information

Headsight HHC HH 14 series. Combine Manual

Headsight HHC HH 14 series. Combine Manual Headsight HHC HH 14 series Cmbine Manual 09010204 Abut Headsight Headsight Cntact Inf Headsight, Inc Bremen, IN 46506 Phne:574-546-5022 Fax: 574-546-5760 Email: inf@headsight.cm Web: www.headsight.cm Technical

More information

Boston Gear WOR Series Mechanical Overload Release Clutches for the Water and Wastewater Industry

Boston Gear WOR Series Mechanical Overload Release Clutches for the Water and Wastewater Industry Bstn Gear WOR Series Mechanical Overlad Release Clutches fr the Water and Wastewater Industry P-303-BG Installatin and Operatin WOR Series Mdel H1900 a divisin f Altra Industrial Mtin Cntents I. Intrductin.......................

More information

Adjusting the Pekar K68 for your Dnepr or Ural Adjustment section translated from Pekar K68 manual

Adjusting the Pekar K68 for your Dnepr or Ural Adjustment section translated from Pekar K68 manual Adjusting the Pekar K68 fr yur Dnepr r Ural Adjustment sectin translated frm Pekar K68 manual Adjusting the Pekar K68 carburetrs n yur Dnepr r Ural. This dcument is intended t server as the primer fr prper

More information

INSTALLATION INSTRUCTION 88051

INSTALLATION INSTRUCTION 88051 INSTALLATION INSTRUCTION 88051 For Rancho Suspension System RS6551: Chevrolet 2500 Suburban & 2500 Avalanche READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev C IMPORTANT

More information

USER`s Manual. Swivelling semi-automatic press. Swivelling manual press TECHNICAL DATA. - works without compressor

USER`s Manual. Swivelling semi-automatic press. Swivelling manual press TECHNICAL DATA. - works without compressor USER`s Manual Swivelling semi-autmatic press Swivelling manual press TECHNICAL DATA - wrks withut cmpressr - pens autmatically ( nly Swing S ) - swivels autmatically aside ( nly Swing S ) Dimensins in

More information

2.5" & 3.5" SUSPENSION SYSTEM JEEP JK WRANGLER 2 & 4 DOOR MODELS

2.5 & 3.5 SUSPENSION SYSTEM JEEP JK WRANGLER 2 & 4 DOOR MODELS 2.5" & 3.5" SUSPENSION SYSTEM 2007-2018 JEEP JK WRANGLER 2 & 4 DOOR MODELS JSPEC2352 www.jksmfg.com jks@ridefox.com 517-278-1226 RV. 100818 GETTING STARTED Read all warnings, instructions, notes and cautions

More information

Suspension System RS6582B

Suspension System RS6582B Suspension System RS6582B Tahoe/Yukon READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION IMPORTANT NOTES! WARNING: This suspension system will enhance the off-road performance

More information

SMARTQUOTE 2.0 RELEASE NOTES

SMARTQUOTE 2.0 RELEASE NOTES SMARTQUOTE 2.0 RELEASE NOTES CHANGES AT A GLANCE SmartQute 2.0 enhancements are detailed in this dcument and include the fllwing: Vastly imprved vehicle cverage Nrmal and Adverse Service schedule selectin

More information

'88-'00 CHEVROLET/GMC IFS 4WD(8LUG) OLD BODY STYLE 6" SUSPENSION SYSTEM P/N

'88-'00 CHEVROLET/GMC IFS 4WD(8LUG) OLD BODY STYLE 6 SUSPENSION SYSTEM P/N 4/10/13 '88-'00 CHEVROLET/GMC IFS 4WD(8LUG) OLD BODY STYLE 6" SUSPENSION SYSTEM P/N. 10-41888 INSTALLATION INSTRUCTIONS APPLICATION WARNING: Applicable for hub mounted ABS sensor models only. Not for 1992-94

More information

INSTALLATION INSTRUCTION 88146

INSTALLATION INSTRUCTION 88146 INSTALLATION INSTRUCTION 88146 Rev H FOR RANCHO SUSPENSION SYSTEM RS6547: 4WD SUBURBAN/YUKON XL, 4WD TAHOE/YUKON, & 4WD AVALANCHE READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING

More information