IEC 309 RANGE PLUGS AND SOCKETS TO IEC 309 STANDARDS

Transcription

1 IC 309 RNG PLUGS ND SOCKTS TO IC 309 STNDRDS TCHNICL CHRCTRISTICS 1 SL / 3 SL - RPID SSMLY ND WIRING PLUGS ND SOCKTS RFRNC STNDRDS The IC 309 SL industrial plugs and sockets meets the dimensional, construction-performance and safety requirements defined by IC and IC International Standards assimilated on a uropean level as N and N Standards. For the purpose of ensuring maximum safety, reliability and quality, GWISS has specifically designed the terminal as well. In fact, development of the terminal took into consideration the requirements of the IC International Standards assimilated on a uropean level as N Standard regarding insulation perforation terminals. CHRCTRISTICS OF TH TRMINL The terminal is made from special high-quality copper alloys. It enables clamping of the flexible type copper wires for a range of nominal sections from 1 to 2.5 mm 2. The perforating system can cut cable insulated in PVC or rubber. For its conformation, terminal tightening occurs without the use of special tools. In accordance with regulations, every terminal is marked with the corresponding polarity and can be reused for an unlimited number of times. To disconnect the cable, the slider can be released simply by using a screwdriver. IC 309 RNG CHRCTRISTICS OF TH MTRILS The parts in insulating material are made of self-extinguishing thermoplastic polymers, with high dimensional stability, resistant to chemical and atmospheric agents. Sockets and plugs are in brass. The plugs are nickel-plated for better abrasion and corrosion. The socket lid closing springs are in stainless steel. LCTRICL CHRCTRISTICS Nominal voltage Un: 500 V Nominal current In: 1 Nominal frequency f: 50/ Hz Overtemperature test: carried out according to N Standard at I = 24 reaking capacity: 20 at 1.1 Un Number of possible operations at Un and In: > 5000 operations Insulation : > 10 MWΩ MCHNICL ND PHYSICL CHRCTRISTICS Operating temperature: C Terminal connection capacity: flexible cables with sections from 1 mm 2 to 2.5 mm 2 xternal section of usable cables: 2P+ from 8.1 to 13 mm 3P+ from 8.8 to 14 mm 3P+N+ from 10 to mm Impact according to 50: IK 08 (5J) Self-extinguishing according to thermo-pressure with ball: C (socket or plug) C (all other parts) Self-extinguishing according to 0 C (socket or plug) Glow Wire Test: 50 C (all other parts) HVIOUR WITH CHMICL ND CORROSIV GNTS Saline solution cids ases Solvents Mineral oil UV Rays Concentrated Diluted Concentrated Diluted Hexane enzol cetone lcohol Resistant Not resistant Limited Limited Resistant Resistant Resistant Resistant Resistant Resistant Resistant 18 CTLOGU 2007 > UROLOC > SOCKT-OUTLTS IC 309 > IC 309 RNG

2 IC 309 RNG PLUGS ND SOCKTS TO IC 309 STNDRDS TCHNICL CHRCTRISTICS DIMNSION TLS PROTCTD STRIGHT TRILING PLUGS Type L L1 1 2P P P+N PROTCTD STRIGHT CONNCTORS Type L 1 2P P P+N IC 309 RNG WTRTIGHT STRIGHT TRILING PLUGS Type L L1 1 2P P P+N WTRTIGHT STRIGHT CONNCTORS Type L 1 2P P P+N CTLOGU 2007 > UROLOC > SOCKT-OUTLTS IC 309 > IC 309 RNG 19

3 IC 309 RNG PLUGS ND SOCKTS TO IC 309 STNDRDS TCHNICL CHRCTRISTICS / 1 / 2 / 3 / 4 - IC 309 PLUGS, SOCKTS ND OUTLT-SOCKTS range of removable type trailing and fixed plugs and sockets for industrial use, compliant with dimensional and performance standards unified on an international level (IC 309) and assimilated by uropean Standards (N 309) and Italian Standards (CI 23-12). quipped with an extra pilot contact (CP) for executing the electrical interlock on plug and socket versions with nominal current 3 and. These supplement the range of fixed plugs and 10 and sockets. lastic sockets and plugs obtained from bar in solid brass type Pt. CuZn40Pb2 (Cu 58%, Zn 40%, Pb 2%); antiloosening terminal with unloosable screws, cable clamp incorporated with anti-abrasion cable glands. The range of multiple-outlet sockets, adaptors and shunts should be considered an integral part of the electrical system, since they are products suitable only for temporary, trailing installations and connections, and not for permanent applications. Furthermore, the range cannot be used in areas with a fire hazard. TCHNICL DT ND COMPLINC WITH STNDRDS IC 309 RNG Reference Standards CI 23-12/1 CI 23-12/2 N 309-1/2 IC 309-1/2 gent Saline solution Nominal voltage Un (V) from to 500 Nominal current In () 1 3 Permissible overload () Total No. operations > 5000 > 2000 > 2000 > 500 reaking capacity at 1.1 Un () Impact (IK code) at ambient temperature HVIOUR WITH CHMICL ND CORROSIV GNTS cids ases Solvents Insulation (MΩ) IK 08 > 10 Concentrated Diluted Concentrated Diluted Hexane enzol cetone lcohol Resistance to abnormal heat and fire Thermopressure with ball ( C) (active parts) (passive parts) Mineral oil Glow Wire Test ( C) 0 (active parts) 50 (passive parts) UV rays Resistance Resistant Not resistant Limited Limited Resistant Resistant Resistant Resistant Resistant Resistant Resistant 20 CTLOGU 2007 > UROLOC > SOCKT-OUTLTS IC 309 > IC 309 RNG

4 IC 309 RNG PLUGS ND SOCKTS TO IC 309 STNDRDS TCHNICL CHRCTRISTICS TRMINL CLMPING CPCITY (mm 2 ) Socket or plug nominal current flexible cables rigid or stranded cables min max min max Possibility of clamping several wires in the same terminal Up to 2 flexible cables with total section not exceeding the clamping capacity PPLICTION FILDS Sector nvironment Typical system Socket nominal currents () Recommended installation Commercial Industrial uilding industry griculture Tourism Data processing centres Public entertainment premises Maintenance Departments Production departments Chemical industry Construction and demolition sites Greenhouses Sheds Campsites Tourist harbours Connection of big processors with IΔn > 3.5 m Stage light connection Movable and portable user connection Machine tool and process machine connection Distribution boards Plugs and sockets boards Movable sprayers and pumps Movable and portable machinery connection Power outlet in service area IP 44 flush-mounting IP 7 surface-mounting on IP 55 Q-DIN IP 7 surface-mounting On Q-OX SC On Q-DIN SC IP 7 surface-mounting On IP 55 Q-DIN On 8 Q-MC range terminal IC 309 RNG XTRNL CL SCTION Nominal current In () No. poles Sections allowed by the IC 309 Standard Sections allowed by the GWISS IC 309 Range Min. (mm) Max. (mm) Min. (mm) Max. (mm) 1 3 2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+ 3P+ 3P+N being studied CTLOGU 2007 > UROLOC > SOCKT-OUTLTS IC 309 > IC 309 RNG

5 IC 309 RNG PLUGS ND SOCKTS TO IC 309 STNDRDS TCHNICL CHRCTRISTICS DIMNSION TLS PROTCTD STRIGHT TRILING PLUGS WTRTIGHT STRIGHT TRILING PLUGS XTR LOW-VOLTG PROTCTD STRIGHT TRILING PLUGS L IC 309 RNG PROTCTD TRILING PLUGS L WTRTIGHT TRILING PLUGS XTR LOW-VOLTG PROTCTD TRILING PLUGS C CTLOGU 2007 > UROLOC > SOCKT-OUTLTS IC 309 > IC 309 RNG

6 IC 309 RNG PLUGS ND SOCKTS TO IC 309 STNDRDS TCHNICL CHRCTRISTICS FLUSH-MOUNTING PROTCTD PLUGS WTRTIGHT FLUSH-MOUNTING PLUGS XTR LOW VOLTG FLUSH-MOUNTING PROTCTD FIXD PLUGS WTRTIGHT COVRS FOR PLUGS F SURFC-MOUNTING PROTCTD PLUGS SURFC-MOUNTING WTRTIGHT PLUGS IC 309 RNG L H L XTR LOW VOLTG SURFC- MOUNTING PROTCTD FIXD PLUGS H L CTLOGU 2007 > UROLOC > SOCKT-OUTLTS IC 309 > IC 309 RNG 23

7 IC 309 RNG PLUGS ND SOCKTS TO IC 309 STNDRDS TCHNICL CHRCTRISTICS DIMNSION TLS PROTCTD STRIGHT CONNCTORS WTRTIGHT STRIGHT CONNCTORS XTR LOW-VOLTG PROTCTD STRIGHT CONNCTORS LOW-VOLTG PROTCTD L IC 309 RNG PROTCTD CONNCTORS L WTRTIGHT CONNCTORS XTR LOW-VOLTG WTRTIGHT 5,5 40 C CTLOGU 2007 > UROLOC > SOCKT-OUTLTS IC 309 > IC 309 RNG

8 IC 309 RNG PLUGS ND SOCKTS TO IC 309 STNDRDS TCHNICL CHRCTRISTICS PROTCTD FLUSH-MOUNTING 10 SOCKT-OUTLTS WTRTIGHT FLUSH-MOUNTING 10 SOCKT-OUTLTS F G H I L R d 1 (fixing plate) 2 2 F SURFC-MOUNTING PROTCTD 10 SOCKT-OUTLTS G H I Ø d R SURFC-MOUNTING WTRTIGHT 10 SOCKT-OUTLTS XTR LOW VOLTG SURFC-MOUNTD PROTCTD 10 SOCKT-OUTLTS IC 309 RNG F 1 F CTLOGU 2007 > UROLOC > SOCKT-OUTLTS IC 309 > IC 309 RNG 25

9 IC 309 RNG PLUGS ND SOCKTS TO IC 309 STNDRDS TCHNICL CHRCTRISTICS DIMNSION TLS SURFC-MOUNTING PROTCTD SOCKT-OUTLTS SURFC-MOUNTING WTRTIGHT SOCKT-OUTLTS XTR LOW VOLTG SURFC- MOUNTD FIXD SOCKT-OUTLTS F H L F H L IC 309 RNG WTRTIGHT MULTIPL-OUTLT SOCKTS MULTIPL-OUTLT SOCKTS WITH WTRTIGHT CL ND PLUG GW GW GW GW GW GW GW GW GW GW GW C NO. OUTPUTS 2 3 GW 4 02 GW GW GW 4 0 GW 4 02 GW 4 03 GW 4 04 GW 4 01 GW 4 05 GW C NO. OUTPUTS 3 GW GW GW 4 0 GW GW GW GW CTLOGU 2007 > UROLOC > SOCKT-OUTLTS IC 309 > IC 309 RNG

10 IC 309 RNG PLUGS ND SOCKTS TO IC 309 STNDRDS TCHNICL CHRCTRISTICS PROTCTD INVRTR DPTORS INDUSTRIL TO DOMSTIC SYSTM DPTORS INDUSTRIL TO DOMSTIC SYSTM DPTORS GW GW 4 0 GW CONVRSION DPTR SHUNTS WITH PLUG GW GW GW 4 20 GW 4 0 GW 4 1 GW 4 2 GW 4 5 GW GW 4 GW GW CONVRSION DPTR SHUNTS WITH CL ND PLUG IC 309 RNG GW 4 2 GW GW GW 4 22 GW GW GW GW 4 2 GW 4 23 GW C NO. OUTPUTS 2 3 GW 4 23 GW 4 25 GW CTLOGU 2007 > UROLOC > SOCKT-OUTLTS IC 309 > IC 309 RNG 27