Safety Performance WORLD PREMIERE. palazzoli.com 1

Transcription

1 Safety Performance WORLD PREMIERE palazzoli.com 1

2 The inventions that progressed our life Benjamin Franklin Energy and persistence conquer all things. The lightning rod 2

3 The inventions that progressed our life Alessandro Volta It is to be observed that common water is not good enough as an electrical conductor, a saline solution is much preferable. The battery 3

4 4

5 The innovation that improves our life Well done is better than well said. Safety Performance 5

6 The unique switched from OFF Connect to the energy source in total safety. Plug-in to the connector and turn the safety ring counterclockwise. The integral ON/OFF switch will snap closed instantaneously, allowing energy to flow in total safety. WORLD PREMIERE X-CEE is the world first switched and mechanically interlocked coupler equipped with a rotoswitch (switch disconnector AC-23A). Rotoswitch inhibits access to live parts when no plug is inserted, and prevents electric arcing and unwanted disconnections. It eliminates any risk of accident. 6

7 interlocked coupler to ON To release the plug and to simply disconnect in total safety, just turn the safety ring clockwise. ALL RIGHTS RESERVED PATENT PENDING The safety ring design with independent and simultaneous contacts snap, in both switching on and off, is a solution typically used in high-end switch disconnectors. 7

8 Versatility The cable gland The simplicity of the smart cable gland makes X-CEE suitable for any type of cable. The gland can be easily closed and tightened using a spanner or a screwdriver. X-CEE can also be suspended by hooking from the slot in the cable gland. The terminals Heavy duty terminals with cage clamp design are standard throughout the range. This guarantees the cable integrity, ensuring good electrical conductivity. Avoid heating and damage to the cable. 8

9 Ergonomics Ergonomic grip The comfortable grip offers easy and safe handling in all conditions, including the use of gloves. The rubber non slip coating on the safety ring enhances the grip, facilitating the switch operation even in presence of fluids. The smooth shape of the handle prevents fluid stagnation. 9

10 technology Safety ring coated in non slip rubber for extra grip Ergonomic comfortable handle AC-23A switch disconnector with independent contacts snap operation ALL RIGHTS RESERVED PATENT PENDING IP66/IP67/IP69 ingress protection Heavy duty terminals with cage clamps help to improve the conductivity and resistance to vibrations 10

11 Reliable and long-lasting Cable gland with reinforced tightening Slot for suspension and spanner tightening ¼ turn closing with safety lock GLOW WIRE 960 C GLOW WIRE 850 C Nickel-plated pins and receptacles offer enhanced corrosion resistance Strain relief smart cable gland suitable for any type of cable 11

12 Energy and Safety X-CEE is the Camps, building sites, entertainment, exhibition centers, public spaces, quarries, mines, agricultural, 12

13 everywhere perfect solution caravan, leisure, commercial ports, shipyards, oil rigs and wells, electrical panels, distribution, control panels, etc. 13

14 Synergy with the TAIS range X-CEE is perfectly compatible with the TAIS series. This design feature significantly enhances the possibilities and convenience of integrated solutions. Inlets and sockets can be installed: on thermosetting (GRP) back boxes, to create multiple wall-mounted configurations on angled back boxes, to create 65 or 85 compact installations on thermosetting (GRP) back plates combined with a box with blind or transparent cover for modular circuit protections against over or over as inlet to power the combination unit or as socket to withdraw energy, in combination with TAIS interlocked sockets in combination with domestic sockets, even protected by watertight caps, to power industrial and domestic appliances. 14

15 Synergy with the TAIS range Total compatibility with domoter domestic sockets Fix the components with 1/4 turn This feature allows the replacement of the component without the need to change the mounting box Up to 2436 solutions

16 X-CEE series Devices with and without rotoswitch as per IEC standards There are up to 2436 possible combinations Inlets Sockets Rotoswitched sockets page 20 page 23 page 26 Straight flanges 20 flanges Handles page 27 page 27 page 27 Straight inlets 20 inlets Plugs page 19 page 19 page 19 Straight sockets 20 sockets Couplers page 21 page 22 page 21 Straight rotoswitched sockets 20 rotoswitched sockets Rotoswitched couplers page 25 page 25 page 25 Single gang boxes Double gang boxes 65 boxes page 27 page 27 page 27 Example of combinations Straight wall-mounted inlet Angled wall-mounted socket Straight rotoswitched socket 65 rotoswitched socket Two straight wall-mounted sockets page 22 page 25

17 X-CEE series X-CEE coms with TAIS 230V 400V 230V 400V Wall-mounted double gang boxes M95 M95 M M 65 wall-mounted boxes M95 M TAIS switched interlocked sockets M95 direct M direct M95 M with fuse-holder with fuse-holder Ý Ý Ý Ý 2P+Q 3P+Q 3P+N+Q 2P+Q Ý 3P+Q 3P+N+Q 3P+Q Ý 3P+N+Q Ý Ý M M190 M250 M290 M M 8M 12M 14M 19M M M190 M250 M290 M95 M95 M95 M95 M95 M95 M95 M V Wall-mounted single gang boxes M M190 M190 M95 M95 M95 M M95 M95 M95 M M M M M M x Back plates Example of combinations 17

18 X-CEE series Safety performance IEC industrial connectors This series of industrial connectors feature the unique safety performance of X-CEE, and are compliant to IEC/EN and IEC/EN The reinforced technopolymer body (with an impact rating of IK10) and ingress protection ratings (see below) make each connector suitable for use in the harshest of environments. Designed for ease of use and optimum safety, each product features wide cable entry and a smart cable gland for easy insertion of cables and the option of suspension, incorporating a non slip safety ring and ergonomic grip for effortless connection. Performance is enhanced by heavy duty terminals with cage clamps for better conductivity and resistance to vibrations. The embedded design flexibility allows multiple combinations obtaining any solution by simply selecting the individual components (inlets, sockets with flanges, back boxes or handles). Protection rating: IP6X IPX6 IPX7 IPX8 IPX9 Cable specifications: protected against access to hazardous parts and totally protected against dust protected against powerful water jets protected against the effects of temporary immersion in water (max 1 m / max 30 min) protected against the effects of continuous immersion in water (1 m - 60 min) protected against high pressure and temperature jets Conformity to standards Body material Protection rating (IP as per IEC/EN 60529) Colour Pin and receptacle material Resistance to abnormal heat and fire «Glow wire» as per IEC/EN ) Self-extinguishing grade (as per UL94) Resistance to impacts (IK rating as per IEC/EN 62262) Resistance to crushing IEC/EN IEC/EN Reinforced technopolymer RAL 7046 grey, RAL 5015 blue Full nickel-plated brass 960 C (contact holders) 850 C (housings) V0 (contact holders) V2 (housings) IK10 > 500Kg A A A A 50V 690V (1000V on request) 2P+Q 3P+Q Entry cable diameters 6,3 18 3P+N+Q 9 23 Entry cable sections (mm 2 ) 1 10 frequency insulation Pilot contact 50Hz 500Hz and DC 690V A and A plugs and sockets 2P+Q 3P+Q Storage temperature -50 C +90 C 3P+N+Q P+Q Operating temperature -40 C +60 C 3P+Q P+N+Q 2P+Q 3P+Q 3P+N+Q Technopolymer WATER SALINE SOLUTION ACIDS BASES SOLVENTS Concentrated Diluted Concentrated Diluted Alcohol Acetone Perchloroethylene Benzene OILS FATS Mineral Vegetable Animal Syntethic AMMONIA OXIDIZERS INORGANIC SALTS GASOLINE DETERGENTS U.V. RAYS 18

19 X-CEE SERIES Safety performance IEC industrial connectors Plugs 50-60Hz Straight panel mounted inlets 50-60Hz 110V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q Features: The plugs are designed to allow for padlocking, either in a stand-alone fashion or connected to sockets. The padlock must have a max. shackle diameter of 10.5 mm, a height of mm and a max. wire diameter of 3.5 mm. Notes: A and A versions available from A A Caps for IEC EN industrial plugs IP67 2P+Q P+Q P+N+Q P+Q/ 3P+Q P+N+Q A 2P+Q/ 3P+Q/ 3P+N+Q A 2P+Q/ 3P+Q/ 3P+N+Q Features: The cap provides protection rating to IP67 when the plug is not in use. Flange dimensions 20 angled panel mounted inlets 50-60Hz 110V 65x83 Ý 2P+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 65x83 Ý 3P+N+Q V 65x83 Ý 2P+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 100x108 Ý 3P+N+Q V 100x108 Ý 3P+Q V 100x108 Ý 3P+N+Q V 114x114 Ý 3P+Q V 114x114 Ý 3P+N+Q angled wall mounted inlets 50-60Hz 110V Ý 2P+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q Common features: The plugs are designed to allow for padlocking, either in a stand-alone fashion or connected to sockets. The padlock must have a max. shackle diameter of 10.5 mm, a height of mm and a max. wire diameter of 3.5 mm. Common notes: A and A versions available from Technical accessories at page 27 Technical data at page 18 Dimensions at page 28 19

20 X-CEE series Safety performance IEC industrial connectors Inlets Frequency 50-60Hz 110V Ý 2P+Q Hz 110V Ý 3P+Q Hz 110V Ý 3P+N+Q Hz 220V Ý 2P+Q Hz 220V Ý 3P+Q Hz 220V Ý 3P+N+Q Hz 400V Ý 2P+Q Hz 400V Ý 3P+Q Hz 400V Ý 3P+N+Q Hz 500V Ý 2P+Q Hz 500V Ý 3P+Q Hz 500V Ý 3P+N+Q Hz 690V Ý 3P+Q Hz 690V Ý 3P+N+Q CC >250V Ý 2P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q CC >50-250V Ý 2P+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz 110V Ý 2P+Q Hz 110V Ý 3P+Q Hz 110V Ý 3P+N+Q Hz 220V Ý 2P+Q Hz 220V Ý 3P+Q Hz 220V Ý 3P+N+Q Hz 400V Ý 2P+Q Hz 400V Ý 3P+Q Hz 400V Ý 3P+N+Q Hz 500V Ý 2P+Q Hz 500V Ý 3P+Q Hz 500V Ý 3P+N+Q Hz 690V Ý 3P+Q Hz 690V Ý 3P+N+Q CC >250V Ý 2P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q CC >50-250V Ý 2P+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Frequency 50-60Hz 110V Ý 2P+Q Hz 110V Ý 3P+Q Hz 110V Ý 3P+N+Q Hz 220V Ý 2P+Q Hz 220V Ý 3P+Q Hz 220V Ý 3P+N+Q Hz 400V Ý 2P+Q Hz 400V Ý 3P+Q Hz 400V Ý 3P+N+Q Hz 500V Ý 2P+Q Hz 500V Ý 3P+Q Hz 500V Ý 3P+N+Q Hz 690V Ý 3P+Q Hz 690V Ý 3P+N+Q CC >250V Ý 2P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q CC >50-250V Ý 2P+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz 110V Ý 2P+Q Hz 110V Ý 3P+Q Hz 110V Ý 3P+N+Q Hz 220V Ý 2P+Q Hz 220V Ý 3P+Q Hz 220V Ý 3P+N+Q Hz 400V Ý 2P+Q Hz 400V Ý 3P+Q Hz 400V Ý 3P+N+Q Hz 500V Ý 2P+Q Hz 500V Ý 3P+Q Hz 500V Ý 3P+N+Q Hz 690V Ý 3P+Q Hz 690V Ý 3P+N+Q CC >250V Ý 2P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q CC >50-250V Ý 2P+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Features: The plugs are designed to allow for padlocking, either in a stand-alone fashion or connected to sockets. The padlock must have a max. shackle diameter of 10.5 mm, a height of mm and a max. wire diameter of 3.5 mm. Notes: A and A versions available from Technical accessories at page 27 Technical data at page 18 Dimensions at page 28

21 X-CEE series Safety performance IEC industrial connectors Couplers 50/60Hz Straight panel mounted sockets 50/60Hz 110V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q Flange dimensions 110V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 65x83 Ý 3P+N+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 65x83 Ý 3P+N+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 65x83 Ý 3P+N+Q V 65x83 Ý 3P+Q V 65x83 Ý 3P+N+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 100x108 Ý 3P+N+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 100x108 Ý 3P+N+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 100x108 Ý 3P+N+Q V 65x83 Ý 3P+Q V 100x108 Ý 3P+N+Q V 65x83 Ý 3P+Q V 100x108 Ý 2P+Q V 100x108 Ý 3P+Q V 100x108 Ý 3P+N+Q V 100x108 Ý 2P+Q V 100x108 Ý 3P+Q V 100x108 Ý 3P+N+Q V 100x108 Ý 2P+Q V 100x108 Ý 3P+Q V 100x108 Ý 3P+N+Q V 100x108 Ý 3P+Q V 100x108 Ý 3P+N+Q V 114x114 Ý 3P+Q V 114x114 Ý 3P+N+Q V 114x114 Ý 3P+Q V 114x114 Ý 3P+N+Q V 114x114 Ý 3P+Q V 114x114 Ý 3P+N+Q V 114x114 Ý 3P+Q V 114x114 Ý 3P+N+Q Features: The sockets are designed to allow for padlocking, either in a stand-alone fashion or connected to the plugs. The padlock must have a max. shackle diameter of 10.5 mm, a height of mm and a max. wire diameter of 3.5 mm. Notes: A and A versions available from Features: The sockets are designed to allow for padlocking, either in a stand-alone fashion or connected to the plugs. The padlock must have a max. shackle diameter of 10.5 mm, a height of mm and a max. wire diameter of 3.5 mm. Notes: A and A versions available from Technical accessories at page 27 Technical data at page 18 Dimensions at page 29 21

22 X-CEE series Safety performance IEC industrial connectors 20 angled panel mounted sockets 50/60Hz 65 angled wall mounted sockets 50/60Hz Flange dimensions 110V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 65x83 Ý 3P+N+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 65x83 Ý 3P+N+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 65x83 Ý 3P+N+Q V 65x83 Ý 3P+Q V 65x83 Ý 3P+N+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 100x108 Ý 3P+N+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 100x108 Ý 3P+N+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 100x108 Ý 3P+N+Q V 65x83 Ý 3P+Q V 100x108 Ý 3P+N+Q V 65x83 Ý 3P+Q V 100x108 Ý 2P+Q V 100x108 Ý 3P+Q V 100x108 Ý 3P+N+Q V 100x108 Ý 2P+Q V 100x108 Ý 3P+Q V 100x108 Ý 3P+N+Q V 100x108 Ý 2P+Q V 100x108 Ý 3P+Q V 100x108 Ý 3P+N+Q V 100x108 Ý 3P+Q V 100x108 Ý 3P+N+Q V 114x114 Ý 3P+Q V 114x114 Ý 3P+N+Q V 114x114 Ý 3P+Q V 114x114 Ý 3P+N+Q V 114x114 Ý 3P+Q V 114x114 Ý 3P+N+Q V 114x114 Ý 3P+Q V 114x114 Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q Features: The sockets are designed to allow for padlocking, either in a stand-alone fashion or connected to the plugs. The padlock must have a max. shackle diameter of 10.5 mm, a height of mm and a max. wire diameter of 3.5 mm. Notes: A and A versions available from Features: The sockets are designed to allow for padlocking, either in a stand-alone fashion or connected to the plugs. The padlock must have a max. shackle diameter of 10.5 mm, a height of mm and a max. wire diameter of 3.5 mm. Notes: A and A versions available from Technical accessories at page 27 Technical data at page 18 Dimensions at page 29

23 X-CEE series Safety performance IEC industrial connectors Sockets Frequency 50-60Hz 110V Ý 2P+Q Hz 110V Ý 3P+Q Hz 110V Ý 3P+N+Q Hz 220V Ý 2P+Q Hz 220V Ý 3P+Q Hz 220V Ý 3P+N+Q Hz 400V Ý 2P+Q Hz 400V Ý 3P+Q Hz 400V Ý 3P+N+Q Hz 500V Ý 2P+Q Hz 500V Ý 3P+Q Hz 500V Ý 3P+N+Q Hz 690V Ý 3P+Q Hz 690V Ý 3P+N+Q CC >250V Ý 2P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q CC >50-250V Ý 2P+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz 110V Ý 2P+Q Hz 110V Ý 3P+Q Hz 110V Ý 3P+N+Q Hz 220V Ý 2P+Q Hz 220V Ý 3P+Q Hz 220V Ý 3P+N+Q Hz 400V Ý 2P+Q Hz 400V Ý 3P+Q Hz 400V Ý 3P+N+Q Hz 500V Ý 2P+Q Hz 500V Ý 3P+Q Hz 500V Ý 3P+N+Q Hz 690V Ý 3P+Q Hz 690V Ý 3P+N+Q CC >250V Ý 2P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q CC >50-250V Ý 2P+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Frequency 50-60Hz 110V Ý 2P+Q Hz 110V Ý 3P+Q Hz 110V Ý 3P+N+Q Hz 220V Ý 2P+Q Hz 220V Ý 3P+Q Hz 220V Ý 3P+N+Q Hz 400V Ý 2P+Q Hz 400V Ý 3P+Q Hz 400V Ý 3P+N+Q Hz 500V Ý 2P+Q Hz 500V Ý 3P+Q Hz 500V Ý 3P+N+Q Hz 690V Ý 3P+Q Hz 690V Ý 3P+N+Q CC >250V Ý 2P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q CC >50-250V Ý 2P+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz 110V Ý 2P+Q Hz 110V Ý 3P+Q Hz 110V Ý 3P+N+Q Hz 220V Ý 2P+Q Hz 220V Ý 3P+Q Hz 220V Ý 3P+N+Q Hz 400V Ý 2P+Q Hz 400V Ý 3P+Q Hz 400V Ý 3P+N+Q Hz 500V Ý 2P+Q Hz 500V Ý 3P+Q Hz 500V Ý 3P+N+Q Hz 690V Ý 3P+Q Hz 690V Ý 3P+N+Q CC >250V Ý 2P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q CC >50-250V Ý 2P+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Features: The sockets are designed to allow for padlocking, either in a stand-alone fashion or connected to the plugs. The padlock must have a max. shackle diameter of 10.5 mm, a height of mm and a max. wire diameter of 3.5 mm. Notes: A and A versions available from Technical accessories at page 27 Technical data at page 18 Dimensions at page 29 23

24 X-CEE series Safety performance IEC industrial switched interlocked sockets This series of switched interlocked connectors feature the unique safety performance of X-CEE and are compliant to IEC/EN , IEC/EN and IEC/EN The reinforced technopolymer body (with an impact rating of IK10) and ingress protection ratings (see below) make each connector suitable for use in the harshest of environments. Designed for ease of use and optimum safety, the built-in rotoswitch inhibits access to live parts when not connected and prevents electric arcing and unwanted disconnection. All sockets are AC-23A certified for use with highly inductive loads. Each product features wide cable entry and a smart cable gland for easy insertion of cables and the option of suspension, incorporating a non slip safety ring and ergonomic grip for effortless connection. Performance is enhanced by heavy duty terminals with cage clamps for better conductivity and resistance to vibrations. The embedded design flexibility allows multiple combinations obtaining any solution by simply selecting the individual components (inlets, sockets with flanges, back boxes or handles). Conformity to standards Body material Protection rating (IP as per IEC/EN 60529) Colour Pin and receptacle material Resistance to abnormal heat and fire («Glow wire» as per IEC/EN ) Self-extinguishing grade (as per UL94) IEC/EN IEC/EN IEC/EN IEC/EN Reinforced technopolymer IP66 / IP67 / IP69 (see page 18) RAL 7046 grey, RAL 5015 blue Full nickel-plated brass 960 C (contact holders) 850 C (housings) V0 (contact holders) V2 (housings) operating : A A A A Thermal Ith A AC21A A AC22A A AC23A A AC23A Cable specifications: 230V 2P+Q 3P+Q Entry cable diameters 6,3 18 3P+N+Q P+Q 3P+Q P+N+Q P+Q 3P+Q 3P+N+Q 2P+Q 3P+Q 3P+N+Q 5,1 10,2 20,1 39,8 400V 8,9 17,7 34,9 69,3 kw 500V 11,1 22,2 43,6 86,6 690V 15,3 30,6 60,2 120 Entry cable sections (mm 2 ) Resistance to impacts (IK rating as per IEC/EN 62262) Resistance to crushing Utilization category frequency insulation Pilot contact Storage temperature Operating temperature IK10 > 500Kg A A A A 50V 690V AC-23A 50Hz 60Hz 690V A and A plugs and sockets -50 C +90 C -40 C +60 C ALL RIGHTS RESERVED PATENT PENDING Technopolymer WATER SALINE SOLUTION ACIDS BASES SOLVENTS Concentrated Diluted Concentrated Diluted Alcohol Acetone Perchloroethylene Benzene OILS FATS Mineral Vegetable Animal Syntethic AMMONIA OXIDIZERS INORGANIC SALTS GASOLINE DETERGENTS U.V. RAYS 24

25 X-CEE series Safety performance IEC industrial switched interlocked sockets Rotoswitched couplers 50-60Hz IP66/IP67/IP69 Straight panel mounted rotoswitched sockets 50-60Hz IP66/IP67/IP69 110V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q Flange dimensions 20 angled panel mounted rotoswitched sockets 50-60Hz IP66/IP67/IP69 65 angled wall mounted rotoswitched sockets 50-60Hz IP66/IP67/IP69 110V 65x83 Ý 2P+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 65x83 Ý 3P+N+Q V 65x83 Ý 2P+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 100x108 Ý 3P+N+Q V 65x83 Ý 3P+Q V 100x108 Ý 3P+Q V 100x108 Ý 3P+N+Q V 114x114 Ý 3P+Q V 114x114 Ý 3P+N+Q Flange dimensions 110V 65x83 Ý 2P+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 65x83 Ý 3P+N+Q V 65x83 Ý 2P+Q V 65x83 Ý 2P+Q V 65x83 Ý 3P+Q V 100x108 Ý 3P+N+Q V 100x108 Ý 3P+Q V 100x108 Ý 3P+N+Q V 114x114 Ý 3P+Q V 114x114 Ý 3P+N+Q Features: Rotoswitches padlockable in s 0 and 1 with padlock The sockets are designed to allow for padlocking, either in a stand-alone fashion or connected to the plugs. The padlock must have a max. shackle diameter of 10.5 mm, a height of mm and a max. wire diameter of 3.5 mm. Notes: A and A versions available from V Ý 2P+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 2P+Q V Ý 2P+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q V Ý 3P+Q V Ý 3P+N+Q Common features: Rotoswitches padlockable in s 0 and 1 with padlock The sockets are designed to allow for padlocking, either in a stand-alone fashion or connected to the plugs. The padlock must have a max. shackle diameter of 10.5 mm, a height of mm and a max. wire diameter of 3.5 mm. Common notes: A and A versions available from Technical accessories at page 27 Technical data at page 24 Dimensions at page 30 25

26 X-CEE series Safety performance IEC industrial switched interlocked sockets Rotoswitched sockets IP66/IP67/IP69 Frequency 50-60Hz 110V Ý 2P+Q Hz 110V Ý 3P+Q Hz 110V Ý 3P+N+Q Hz 220V Ý 2P+Q Hz 220V Ý 3P+Q Hz 220V Ý 3P+N+Q Hz 400V Ý 2P+Q Hz 400V Ý 3P+Q Hz 400V Ý 3P+N+Q Hz 500V Ý 2P+Q Hz 500V Ý 3P+Q Hz 500V Ý 3P+N+Q Hz 690V Ý 3P+Q Hz 690V Ý 3P+N+Q CC >250V Ý 2P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q CC >50-250V Ý 2P+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz 110V Ý 2P+Q Hz 110V Ý 3P+Q Hz 110V Ý 3P+N+Q Hz 220V Ý 2P+Q Hz 220V Ý 3P+Q Hz 220V Ý 3P+N+Q Hz 400V Ý 2P+Q Hz 400V Ý 3P+Q Hz 400V Ý 3P+N+Q Hz 500V Ý 2P+Q Hz 500V Ý 3P+Q Hz 500V Ý 3P+N+Q Hz 690V Ý 3P+Q Hz 690V Ý 3P+N+Q CC >250V Ý 2P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q CC >50-250V Ý 2P+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Frequency 50-60Hz 110V Ý 2P+Q Hz 110V Ý 3P+Q Hz 110V Ý 3P+N+Q Hz 220V Ý 2P+Q Hz 220V Ý 3P+Q Hz 220V Ý 3P+N+Q Hz 400V Ý 2P+Q Hz 400V Ý 3P+Q Hz 400V Ý 3P+N+Q Hz 500V Ý 2P+Q Hz 500V Ý 3P+Q Hz 500V Ý 3P+N+Q Hz 690V Ý 3P+Q Hz 690V Ý 3P+N+Q CC >250V Ý 2P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q CC >50-250V Ý 2P+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz 110V Ý 2P+Q Hz 110V Ý 3P+Q Hz 110V Ý 3P+N+Q Hz 220V Ý 2P+Q Hz 220V Ý 3P+Q Hz 220V Ý 3P+N+Q Hz 400V Ý 2P+Q Hz 400V Ý 3P+Q Hz 400V Ý 3P+N+Q Hz 500V Ý 2P+Q Hz 500V Ý 3P+Q Hz 500V Ý 3P+N+Q Hz 690V Ý 3P+Q Hz 690V Ý 3P+N+Q CC >250V Ý 2P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 2P+Q Hz >50V Ý 3P+Q Hz >50V Ý 3P+N+Q CC >50-250V Ý 2P+Q Hz V Ý 3P+Q Hz V Ý 3P+N+Q Features: Rotoswitches padlockable in s 0 and 1 with padlock The sockets are designed to allow for padlocking, either in a stand-alone fashion or connected to the plugs. The padlock must have a max. shackle diameter of 10.5 mm, a height of mm and a max. wire diameter of 3.5 mm. Notes: A and A versions available from Technical accessories at page 27 Technical data at page 24 Dimensions at page 30

27 X-CEE series Accessories Handles 65 angled wall mounted boxes, modular with TAIS system Entry cable diameters 2P+Q P+Q P+N+Q P+Q / 3P+Q P+N+Q P+Q / 3P+Q / 3P+N+Q P+Q / 3P+Q / 3P+N+Q Notes: A and A versions available from Straight panel mounted flanges For flanges of dimensions Box dimensions 65x83 92x x108 x x Notes: Code 5133 available from Wall mounted single gang boxes, modular with TAIS system Flange dimensions 2P+Q 65x P+Q 65x P+N+Q 65x P+Q / 3P+Q 65x83 5 3P+N+Q 100x P+Q / 3P+Q / 3P+N+Q 100 x P+Q / 3P+Q / 3P+N+Q 114x For flanges of dimensions Box dimensions 65x83 92x x108 x x Notes: Code 5103 available from Notes: A and A versions available from angled panel mounted flanges Wall mounted double gang boxes, modular with TAIS system Shackle diameter Material Flange dimensions Padlock for rotoswitched sockets 2,75 steel - brass P+Q 65x P+Q 65x P+N+Q 65x P+Q / 3P+Q 65x83 5 3P+N+Q 100x P+Q / 3P+Q / 3P+N+Q 100x P+Q / 3P+Q / 3P+N+Q 114x Notes: A and A versions available from For flanges of dimensions Box dimensions 2x(65x83) 92x x(100x108) x Flange dimensions Blind flanges for wall mounted boxes 65x x Uses: It prevents the safety ring from rotating. Technical accessories at page 27 Technical data at page 24 Dimensions at page 31 27

28 X-CEE series Dimensions Plugs Straight panel mounted inlets A (MAX) B Ø Corrente nominale N Poli A B Ø 2P+T P+T P+N+T P+T N. N. 194 A B Ø 93 3P+T 3P+N+T P+T P+T P+N+T P+T P+T 3P+N+T N. Angled panel mounted inlets N. 65 angled wall mounted inlets N. 28

29 X-CEE series Dimensions Couplers A (MAX) Straight panel mounted sockets A (MAX) B B Ø Ø Corrente nominale N Poli A B Ø 2P+T P+T P+N+T Corrente 2P+T N N. Poli 3P+T 207A B Ø 93 nominale 3P+N+T P+T P+T P+N+T P+T P+T 3P+N+T N. Angled panel mounted sockets N. 65 angled wall mounted sockets N. 29

30 X-CEE series Dimensions A Rotoswitched coupler Straight panel mounted rotoswitched sockets A B Ø Ø Corrente nominale N Poli A B Ø 2P+T P+T Corrente 3P+N+T N N. Poli A B Ø nominale 2P+T 3P+T P+N+T P+T P+T P+N+T P+T P+T 3P+N+T N. Angled panel mounted rotoswitched sockets N. 65 angled wall mounted rotoswitched sockets N. 30

31 X-CEE series Dimensions Straight panel mounted flanges Angled panel mounted flanges N. N. 65 angled wall mounted boxes Wall mounted single gang boxes Wall mounted double gang boxes 31

32 palazzoli.com 55646E