8300 Liquid Fertilizer Applicator PARTS MANUAL Fast Distributing, Inc County Road 44 Mountain Lake, MN 56159

Transcription

1 8300 Liquid Fertilizer Applicator PARTS MANUAL Fast Distributing, Inc County Road 44 Mountain Lake, MN 559

2 General Information All rights, especially copying and distribution rights are reserved. No part of this publication may be reproduced in any form or by any means, electronic or mechanical, including photocopying, without express written permission from Fast Distributing, Inc. Parts information in this manual represents components installed when product was manufactured based upon the best available information. Modifications made subsequent to initial delivery are not included. Always verify the parts and color required with Fast Distributing, Inc at If you have any questions, please contact your dealer or our Parts and Service Department.

3 Limited Warranty 8300 Applicator Fast Distributing Inc. warrants to the buyer that the new machinery is free from defects in material and workmanship. This warranty is only effective as to any new machinery which has not been altered, changed, repaired or treated since its delivery to the buyer, other than by FAST DISTRIBUTING or its authorized dealers or employees, and does not apply to accessories, attachments, tools or parts, sold or operated with the new machinery, if they have not been manufactured by FAST DISTRIBUTING. FAST DISTRIBUTING shall only be liable for defects in the materials or workmanship attributable to faulty material or bad workmanship that can be proved by the buyer, and specifically excludes liability for repairs arising as a result of normal wear and tear of the new machinery or in any other manner whatsoever, and without limiting the generality of the foregoing, excludes application or installation of parts not completed in accordance with FAST DISTRIBUTING operator s manual, specifications, or printed instructions. Written notice shall be given by registered mail, to FAST DISTRIBUTING within seven (7) days after the defect shall have become apparent or the repairs shall have become necessary, addressed as follows: FAST DISTRIBUTING INC County Road 44, Mountain Lake, MN 559. This warranty shall expire one () year after the date of delivery of the new machinery. If these conditions are fulfilled, FAST shall at its own cost and at its own option either repair or replace any defective parts provided that the buyer shall be responsible for all expenses incurred as a result of repairs, labor, parts, transportation or any other work, unless FAST has authorized such expenses in advance. The warranty shall not extend to any repairs, changes, alterations, or replacements made to the new equipment other than by FAST or its authorized dealers or employees. This warranty extends only to the original owner of the new equipment. Rubber parts (including tires, hoses, grommets) are not warranted. This warranty is limited to the terms stated herein and is in lieu of any other warranties whether express or implied, and without limiting the generality of the foregoing, excluded all warranties, express or implied or conditions whether statutory or otherwise as to quality and fitness for any purpose of the new equipment. FAST disclaims all liability for incidental or consequential damages. This Applicator is subject to design changes and FAST DISTRIBUTING INC. shall not be required to retrofit or exchange items on previously sold units except at its own option. Fast Distributing Inc. Warranty void if not registered Series Applicator 3

4 Fast Applicator Serial Number - - Date Purchased / / Tank Size Number of Coulters Pump Manufacturer: Ace 50-0, Ace or Hypro HM (circle one) Series Applicator

5 Contents 8300 Applicator General Information... Trailer... Axles... 8 Tire & Rim... 0 Units With Yellow Tanks... 0 Units With White Tanks Ft Toolbar... Gauge Wheel... 4 Mounting Clamp Kit For Ausherman Coulter Option... 5 Ausherman Vantage II Fertilizer Coulter... Coulter Assembly... 8 Knife Assembly Standard Quick Fill Optional Quick Fill Inch Quick Fill Tank To Pump Plumbing Tank To Pump Plumbing... 5 Ace 50-0 Pump Hyd Motor... Ace 50-0 Pump... 7 Optional Hypro Pump Spike Valve And Agitation And Control And Agitation And Control And 834 Ball Valve Mount And 833 Valve Stack Valve Stack Valve Stack Bar Feedline Plumbing... 3 Raven SCS450 Console Control Console Harness Control Console Harness Control Console Harness Hydraulic System For Pump... 4 Fasse Block Harness... 4 Toolbox Carrier Kit Contents Lighting Series Applicator 5

6 Trailer Item Vendor Part # Fast Part # Description Qty. 89 Cart, Fert, 838, Weldment 0007 Cylinder Main Lift 40TD Roll Pin /4 X " Series Applicator

7 Item Vendor Part # Fast Part # Description Qty Washer Machinery -/4" ID X 0 Ga. Zp Pin Anti-Rotation Main Lift Cylinder 759 Zerk / Fitting Adapter TO Bolt Hex Head / X 3-/ GR5 Zp Nut /" Center Lock Zp Pin, X 8 /" Cylinder Stop Main Lift 7000 Pin Snap 3 4 Bolt Hex Head / X 7'' GR5 Zp For Jost Jack Item Handle Jost Jack Jack Jost Brand 5430 Jack Mount Holder Weldment Jost Jack 7 3 Nut /" Nylock Lock Zp Pin Hitch Heavy-Duty 3/4 X '' Austin Jack Safety Link Pin Austin Jack Pin Lynch / X -3/ Nut " Center Lock Zp 3 00 Bolt HH X 3'' GR5 Zp Washer Safety Chain Dom Safety Chain Spacer 5 33 Nut Hex Head 3/4" Nylock Zp Safety Chain 30,000# 800 Gallon NS Safety Chain 0,000# 050 And 350 Gallon Hitch Cat 4 Black Large Hitch Clevis 9 9 Bolt Hex Head 3/4 X 5-/'' GR5 Zp Bolt HH Special X -/'' GR5 Zp (54) 3 0 Bolt HH /4 X 3/4'' GR5 Zp 3 5 Washer /4" Zp Nut Whizlock /4" Zp Store Away Plug Holder Pin Spring 3/8 X " Fert Cart Hose Holder Weldment Holder Manual Dom Spacer Hose Bracket Washer Lock 3/8" Zp 4 Bolt HH 3/8 X -/4'' GR5 Zp 4 78 Machinery Washer " X 4 Ga Bushing Connex.5 OD X ID X " Lg Hose Ring 4" NS Hose Ring 3" Bolt Carriage 3/8 X '' GR Zp 4 50 Washer Lock 3/8" Zp 47 3 Nut Hex 3/8" Zp Lower Lift Arm Weldment Upper Lift Arm Weldment Cart, Fertilizer, , Weldment NS Cylinder Stop 3/4'' NS 5900 Cylinder Stop '' NS Cylinder Stop -/4'' NS Cylinder Stop -/'' 8300 Series Applicator 7

8 Axles Series Applicator

9 Item Vendor Part # Fast Part # Description Qty. 95 Axle 0' Side Fold 5000# Seal 0 Bolt (90497 CR30087) Cone Inner (90333/39585) 4 78 Cup Inner (9033/3950) Hub 0 Bolt W/Cups 79 Cup Outer (9033/453A) Cone Outer (90334/40) Washer Spindle (933) Nut Spindle.5- TPI Gasket Hub Cap Hub Cap Q-87 Hub 3 Bolt HH 5/ X / GR5 Zp Cotter Pin Nut Wheel (9357) Stud Wheel (953033) Axle Single 400 Gallon 0000# 480/80R50 Optional Axle, Spacer Dual, /"-0" Wheel Track Optional NS 090 Axle, Spacer Dual, 80"-0" Wheel Track Optional NS 0907 Axle, Spacer Dual, 88"-3" Wheel Track Optional Seal NI Cone Inner NI Cup Inner NI Hub 0 Q88 W/Cups 79 Cup Outer NI Cone Outer NIO Washer Spindle Q Hub Cap NI Bolt HH 5/ X / GR5 Zp Gasket Hub Cap Nut Castle NI Cotter Pin Q88 Hub Nut Wheel NI NI Stud Wheel NI Spacer Dual 30" Rows WR 0308 Optional NS 700 Spacer Dual " Rows WR 03 Optional NS 7004 Spacer Dual 0" Rows WR 030 Optional 8300 Series Applicator 9

10 Tire & Rim 3 Units With Yellow Tanks Item Vendor Part # Fast Part # Description 830 / TT L Tire 480/80R50 LH + Yellow Wheels Opt. TT R Tire 480/80R50 RH + Yellow Wheels Opt. TT R /90R4 LR49 Yellow RH TT L /90R4 LR49 Yellow LH 3 TT L /90R4 LR49 Yellow Dual LH Opt. Opt. Opt. 3 TT R /90R4 LR49 Yellow Dual RH Opt. Opt. Opt. Units With White Tanks Item Vendor Part # Fast Part # Description 830 / TT L Tire 480/80R50 LH + Silver Wheels Opt. TT R Tire 480/80R50 RH + Silver Wheels Opt. TT R /90R4 LR49 Silver RH TT L /90R4 LR49 Silver LH 3 TT L /90R4 LR49 Silver Dual LH Opt. Opt. Opt. 3 TT R /90R4 LR49 Silver Dual RH Opt. Opt. Opt Series Applicator

11 , Item Vendor Part # Fast Part # Description Tank 050 Gallon Yellow NS Tank 050 Gallon White NS Tank 350 Gallon Yellow NS Tank 350 Gallon White NS Tank 800 Gallon Yellow NS Tank 800 Gallon White NS Tank 400 Gallon Yellow NS Tank 400 Gallon White Lid Assembly " Fp Bd Bltd Flng W - 3-/4" 4 9SASUMP9 Sump Fitting W/Elbow Inch Polypro Tank Flange Assy 500 Hose 3/4 Flo-Rite Faucet Clear /4 Inch Poly Street Elbow - 90 Degree Bushing Reducer -/4 To 3/4'' NPT ) USED ON 0 GA OPT Tank 0 Gallon Rinse Yellow ) USED ON 0 GA OPT. NS 5704 Tank 0 Gallon Rinse Gray ) USED ON 0 GA OPT. 0 4 Bolt Hex Head 5/ X 3/4'' GR5 Zp ) USED ON 0 GA OPT Tank.5 Gallon Rinse Yellow NS 5705 Tank.5 Gallon Rinse Gray OPT. W/ WHITE TANK 8 Hut Hex Nylock Zp Washer Flat 5/" Zp Bolt Hex Head 5/ X -/'' GR5 Zp Hose Overflow " 7 Ft 7 Ft 7 Ft 7 Ft 5003 Burp Tube Pump 8 Ft 8 Ft 8 Ft 8 Ft Clamp T Bolt /4" X /4" Male Elbow " Vent Cap Without Screen " Poly Tank Fitting " MPT X " Hose Shank Series Applicator

12 30-40 Ft Toolbar Series Applicator

13 Quantities For 30'' Row Applicator Item Vendor Part # Fast Part # Description Row 3 Row 5 Row 7 Row 37 Nut HH / Center Lock Zp 703 Pin Main Wing 3 57 Bolt HH / X 3-/ GR5 Zp 4 3 Bolt Hh 3/8 X -/ GR5 Zp Nut HH 3/8 Centerlock Zp Wing Extension Pin Flip Wing Pivot Wing Main Bolt Carriage 3/8 X '' Zp Bracket Light 50 Washer Lock 3/8" Zp Nut HH 3/8" Zp Nut HH / Centerlock Zp 4 55 Bolt HH / X -/'' GR5 Zp 5 70 Pin Cylinder Main Wing 7834 Extension Flip Wing Bolt HH 5/8 X 7-/'' GR5 Zp 8 74 Wing Lock Catch 9 53 Bolt HH / X '' GR5 Zp Nut HH /'' Zp 8 Nut HH 5/8'' Zp 770 Wing Flip Pin Roll /4 X -/'' Washer, Machinery X 4 Ga Pin Link Cylinder 707 Link Flip Wing Inner Link Flip Wing Outer Clip, Quick Lock Pin Wing Lock Pin Flip Wing Linkage Stand Flip Wing Lock 3 47 Bolt HH 5/8 X 8-/'' GR5 Zp 33 3 Nut Hex 5/" Centerlock Zp 34 5 Bolt Hex Head 5/ X " GR5 Zp Flip Wing Latch 3 70 Bolt Hh 5/8 X '' GR5 Zp 37 Washer Flat 5/8 Zp Hut HH 5/8 Centerlock Zp Holder Hose Tool Bar Center Section Pin Hair Pin Cotter Pin Lock Transport 43 7 Bracket Hose Ring Holder 8300 Series Applicator 3

14 Gauge Wheel Item Vendor Part # Fast Part # Description Qty. 900L Left Hand Gauge Wheel Weld NS 900R Right Hand Gauge Wheel Weld Spindle Only NS 9055L Left Hand Mounting Bracket NS 9055R Right Hand Mounting Bracket U-Bolt 7 X 5 X 5/8" Zp 4 53 Washer Lock 5/8" Zp 4 5 Nut HH 5/8" Zp 4 90 Pin Lock Pin Hair Pin Cotter Hub 5 Bolt W Cups Nut HH / X 0 Fine Thread Zp Washer Spindle Cap, Hub Pin, Cotter Nut Castle Bearing Outer 5 NI9058 Cup Outer NI9057 Cup Inner Bearing Inner Seal Hub Tire/Wheel Series Applicator

15 Mounting Clamp Kit For Ausherman Coulter Option Item Vendor Part # Fast Part # Description Qty C Washer Lock Spring 5/8 Plt C Nut Hex 5/8- Plt C Washer Lock Spring / Plt C Nut Hex /-3 Plt C Hex Bolt /-3 X -/ GR D 7 Split Bar Clamp C U-Bolt 5/8- X 7 /3 X 7 /, Use With 04-8k C U-Bolt 5/8- X 7 /3 X 9 /, Use With 04-4k C U-Bolt 5/8- X 7 /3 X, Use With 04-43k K Sq Bar Clamp Kit 8300 Series Applicator 5

16 Ausherman Vantage II Fertilizer Coulter 8300 Applicator Item Vendor Part # Fast Part # Description Qty C 7500 Fb Angled Coulter Shank 80-8C Vanll 5" Offset Flat Shank RH (Shown) 80-8C Vanll 5" Offset Flat Shank LH C Washer Lock Spring 5/8 Plt C Nut Hex 5/8- Plt C HHCS 3/4-0 X Gr C Washer Lock Spring 3/4 Plt D Front Shield Series Applicator

17 Item Vendor Part # Fast Part # Description Qty C Washer Flat 3/4 SAE Plt C Swing Arm Bushing H Blade Spring Rod Weldment 04-33V Coulter Pivot Rh Sub-Assy (Shown) 04-35V Coulter Pivot Lh Sub-Assy 00-00D Hub Grease Cap C Pin Cotter 3/ X -3/4 Plt C Nut Hex Slotted 7/8-4 Plt C Washer Spindle - 7/8 8-00C Bearing Cup LM-700 (Not Shown) 8-0C Bearing Cone LM C Oil Seal Double Lip C Pin Cotter 3/3 X Long V Blade Arm RH Sub-Assy (Shown) 04-3V Blade Arm LH Sub-Assy C Bushing Coulter Casting C Spring.5 OD X.5 Coil 04-07D Spring Rod Sleeve -/8 OD C Casting Coulter Spring Washer C Nut Hex 3/4-0 Plt Nylock C Parallel Arm Pivot Bushing C Torsion Spring 3/8 Wire RH (Shown) C Torsion Spring 3/8 Wire LH C Single Bevel 8 Coulter Blade C Plow Bolt /-3 X -/ GR D Coulter Hub C Washer Lock Spring / Plt C Nut Hex /-3 Plt C HHCS 5/8- X -3/4 Gr C Washer Flat 5/8 USS Plt D Wiper Wheel Arm RH (Shown) 04-4D Wiper Wheel Arm LH D Wiper Wheel Spacer S x3 Depth Wheel Assy 8-095C Press Wheel Brg Only C Press Wheel Tire Only C Nut Lock 3/8- Plt C Screw Set Sckt Hd /4-0 (/) D Dry Fertilizer Tube Collar C Rubber Pad C Dry Fertilizer Tube RH 80-5C Dry Fertilizer Tube LH C RHSNB 3/8- (-3/4 SS) C Decal Gp Planting Components C Grease Zerk Straight / C Grease Zerk /4-8 X 90-Deg C Vantage II Liquid Insert H Van II RH Dry Drop Tube Weldment (shown) 04-43H Van II LH Dry Drop Tube Weldment 8300 Series Applicator 7

18 Coulter Assembly Series Applicator

19 Item Vendor Part # Fast Part # Description Qty. N39 Casting Clamp N /" Straight Coulter Shank NS N /" Offset Coulter Shank AR NS 5099R -/" Offset Coulter Shank Special NS 5099L -/" Offset Coulter Shank Special 3 8 Bolt HH 3/4x3 GR5 Zp 4 FPC50 Cotter Pin 5/" X 3 5 N37- Clamp Plate FBUB0 U-Bolt 7 X 8-/ X 5/8 E-Coat 7 N347-7 Bushing Nylon For Spring Rod 8 N347-5 Spring Rod 9 S33 Spring Coulter 0 N347-3 Spring Bushing Casting 33 Nut HH 3/4 Nylock Zp FBH08-SS Bolt HH / X 4 Gr5 Ss 3 FBS Set Screw 3/8 X /" 4 COI Rock Guard Nipple, Pipe /4 X 5 SS 5304 Elbow, Street /4" NPT SS Hose Shank Check Valve Assembly Items 7-7 TJ-47--/4 Adapter /" X /4" NPT 8 TJ-CP49-50 Orifice Plate 30 SS 9 TJ-CP355-5-SS Spring 5# 30 SS 0 TJ-CP77-5//SS Ball 30 SS TJ SS Hose Shank / X /4" NPT 303 SS 5004 Teejet Body SS 3 TP-00xx-SS Tip SS Teejet (Specify Tip Size) 4 FNJ08-SS Hut HH Jam /" SS 5 TJ-CP35SS Nozzle Cap SS FNJL08-SS 7500 Nut HH Nylock /" SS 7 FNL-NF Nut HH 3/4" Nf Zp 8 N Swing Arm W Hub 9 N347- Bushing Coulter Flanged 30 N Coulter Ripple 0" 3 W40- Seal Coulter Piece 3 W3 Bearing 33 W38 Cup 34 FBC080 Bolt Carriage /" X -/"Zp 4 35 W3Y Hub Assembly Complete (Items 3-33,35,37-39) W3 Hub Only 3 FNH08 Nut HH /: Zp 4 37 W0 Nut Spindle 5/8" 38 FPC497 Pin Cotter /8" X -/4" 39 W50 Cap Hub 40 N347- Coulter Hinge Casting 4 N Locking Collar 30 Degree NS N34-/45 Locking Collar 45 Degree OPT. 4 FBS004 Setscrew 5/8" X " 43 FPC505 Pin Cotter /8" X -/4" 44 FWM8 Bushing /8" Thick 45 Nut HH 5/8" Zp Washer Lock 5/8" Series Applicator 9

20 Knife Assembly Item Vendor Part # Fast Part # Description Qty. FBH083 Bolt HH / X 3-/4 Zp GR5 0 Washer Flat /" Zp 3 55 Bolt HH / X-/ Zp GR5 4 WI-CO Wiese CO5000 Knife Mounting Bracket And Shim Kit BR-400H 5400 Clamp Hose 5/" 4 7 BS-3/8BH Hose EDPM 3/4" X 4'' 8 VI-3A Hose Barb /4" MPT X 3/8" Hose 9 VI-304SE Elbow Street /4" MPT SS Valve Check /4" MPT X 3/8" Hose BS-3/8BH Hose EDPM 3/4" X 54'' NYB Tee 3/4" Hose Barb AR NS NYB L 3/4" Hose Barb AR 3 CP49-xx CP49-xx Orifice Disc 49-XX See Rate Chart 4 CP8999EPR Gasket Orifice Disc NYB Hose Shank 3/8" CP507--NY Cap Nozzle Black 7 5 Nut HH /" Zp Washer Lock /" Zp Bolt HH / X -3/4'' Zp GR Series Applicator

21 Standard Quick Fill Item Vendor Part # Fast Part # Description Qty. FC Clamp 3" FP M300G Gasket 3" 3 M300CPG Manifold 3" Flange X 3" Flange-90 4 M3000BRB Manifold 3" Flng X " HB 90 Degree 5 TC Clamp T-Bolt " Hose Hose Fertilizer AR 7 M0BRB Manifold " Hose Barb 8 M00G Gasket " FP 9 FC Clamp " FP 0 00CAP Cap " HN Laynard MVSF0FP 5308 Valve " Stubby FP 8300 Series Applicator

22 Optional Quick Fill Item Vendor Part # Fast Part # Description Qty. FC Clamp 3" FP 5 M300G Gasket 3" FP 5 3 M300CPG Manifold 3" 90 Elbow 4 M300BRB Hose Barb 90 3" 5 TC Clamp T-Bolt 3" Hose Hose Fertilizer AR 7 M300BRB Manifold 3" Hose Barb 8 MV300FP Valve 3" Full Port 9 HN Lanyard 0 M300CPG " 45 Degree QCP M300A " Male Adapter QCP M300CAP Cap 3" Series Applicator

23 Inch Quick Fill Item Vendor Part # Fast Part # Description Qty Bushing Reducer 3 X " Hose Barb 90 " Clamp T-Bolt " Hose Hose Fertilizer AR Manifold " Hose Barb Gasket " Fp Clamp " Fp Valve " Stubby Fp Cap " Laynard 8300 Series Applicator 3

24 Tank To Pump Plumbing A B 4 Item Vendor Part # Fast Part # Description Qty. M300TEE 5305 Manifold Tee 3'' M300G Manifold Gasket 3" 3 FC Manifold Clamp 3" 4 M3000BRB 530 Manifold Hose Barb 3 X " Hose 5 TC Clamp '' T-Bolt Hose.3 Mi AP Hose '' Fertilizer AR 7 M0BRB Manifold " FP Flange X " Hb 90 8 M00G Manifold " EPDM Gasket 4 9 FC Manifold Clamp " 4 0 M000TEE Manifold " Full Port X " Flange 00G Manifold Gasket For '' & FC Manifold Clamp " 3 MV0CF Manifold Valve " FP-4 Bolt 4 MLS 5305 Manifold Stainer " Full Port 5 BS-BH Hose In EPDM From Spike Valve AR Clamp '' Worm Screw 7 M00BRB Manifold " X " Barb A From Tank B To Pump Series Applicator

25 Tank To Pump Plumbing 8300 Applicator A B 9 8 Item Vendor Part # Fast Part # Description Qty. FC Clamp Inch Full Worm Screw M00G '' EPDM Gasket 3 M0BRB 5300 '' FP X '' FP Manifold Co 4 MV0CF Valve Flanged '' Fp-4 Bolt 5 M000TEE '' Full Port X '' Flange M0BRB '' FP Flange X '' HB 90 7 TC Clamp '' T-Bolt Hose.3 Mi 8 AP Hose '' Fertilizer AR 9 MLS 5305 Stainer Manifold Full Port 0 BS-BH Hose '' EPDM From Spike Valve AR M00BRB 5300 '' Manifold X '' Barb Clamp '' Worm Screw 3 FC Manifold Clamp " 4 00G '' EPDM Gasket For '' & A From Tank B To Pump 8300 Series Applicator 5

26 Ace 50-0 Pump Hyd Motor REF. # MODEL 04N MODEL 0N MODEL 0N DESCRIPTION REQUIRED * S00 S00 S00 Seal support spacer * Seal cartridge Snap ring, bearing Ball bearing, 7/" I. D Drive plate Valve cap, coasting check 7* " O" ring, coasting check Spring, coasting check Ball, coasting check 0* " O" ring, housing seal Gear housing Dowel pin, housing End plate Cap screw, /4" N.C. hex head Adjusting screw, needle valve * Thread seal, 3/8", needle valve Washer, flat steel, needle valve Nut, 3/8" N.C. jam, needle valve Drive shaft Dowel pin, drive shaft Idler shaft Ball, idler shaft Retaining ring, idler gear Gear Adapter body, #8 SAE male x /" NPT " O" ring, orifice insert (use with 445 insert) Insert, restrictor orifice (use with 4455 body) " O" ring, #8 SAE male fitting Reverse check, #8 SAE male x /" NPT # Repair Kit, RK-BAC-75-HYD-L Series Applicator

27 Ace 50-0 Pump A REF. # PART NUMBER EDP # DESCRIPTION REQ. BAC Pipe plug Pipe plug, stainless steel (optional) 4 BAC--50-FLG 4057 Volute, cast iron, NPT & flanged (for 50F models) BAC--50-SS 4049 Volute, 3 stainless steel, NPT & flanged (for 50FS models) 3 BAC-3-A 4039 Nut, 3/8 NF, cad plated 3 BAC-3-A-SS 4039 Nut, 3/8 NF, stainless steel (optional) 4 BAC-4-HYD-SS Washer, 3/8 star, stainless steel 5 BAC--50-P 4044 Impeller, Valox, keyway 5 BAC--50-CI Impeller, cast iron, keyway (optional) BAC-7V 405 Seal, carbon/ceramic/viton (includes 400 O-Ring) BAC-7SC 405 Seal, silicon carbide/viton (includes 400 O-Ring) (optional) A O-ring, shaft seal 7 BAC O-ring, body seal 8 BAC-4-50-HYD Mounting frame, cast iron (for 50F models) 8 BAC-4-50-HYD-SS 4039 Mounting frame, 3 stainless steel (for 50FS models) Cap screw, 3/8 NC x 3/4 hex head Cap screw, 3/8 NC x 3/4 hex head, stainless steel (optional) 4 0 BAC Slinger BAC Snap ring, internal, BAC-4 mounting frame BAC Ball Bearing, sealed, BAC- shaft 3 BAC Snap ring, external, BAC- shaft 4 BAC-3-S Spacer for BAC- shaft 5 BACH Key, /8 x /8 x / BAC--HYD-SS 400 Shaft, 5/8 diameter, keyway and tang slot, stainless steel 7 BAC-75-HYD Hydraulic motor, 7 GPM (includes parts 8-5) 8 S00 40 Seal support spacer for 00 Series HYD motor 9 BAC-75-HYD-0N 4397 Hydraulic motor, 7 GPM (motor only - no external fittings) Cap screw, 5/ N. C. x 3-3/4 socket head (for 0N motor) O-ring, #8 SAE fitting BAC-78-8SAE 444 Reverse check valve, #8 SAE male x / NPT female 3 BAC-80-8SAE 4455 Adapter, restrictor body, #8 SAE male x / NPT female O-ring, orifice insert 5 BAC Orifice, restrictor insert,.09 (0N) LS-0N 448 Flow limiting valve (0N), #8 SAE male x / NPT female RK-FMC Repair kit for FMC-50 series pump - RK-FMCSC Repair kit for FMC-50 series with silicon carbide shaft seal - # RK-BAC-75-HYD-L 4374 Repair kit for 00-L Series motor Series Applicator 7

28 Optional Hypro Pump SHAFT C END PLATE ASSY C BODY ASSY-SMALL PILOT CE STICKER LABEL INSTRUCTION TAG LABEL READY FOR ROUND UP DECAL PACKING KIT CARTON - INDIVIDUAL TAG IMPELLER WASHER WASHER ALCNUT N CAP SCREW, HEX HEAD 3/8"- X 7/8" CAP SCREW, HEX HEAD 5/"-8 X 7/8" SEAL, MECHANICAL O-RING WOODRUFF KEY SLINGER SEAL C MOUNTING FLANGE P IMPELLER (CW ROTATION) C PUMP HOUSING, 300x0 U.FLG ITEM NO. PART NUMBER DESCRIPTION QTY GEROTOR A ADAPTER-INLET PORT ASSY A CHECK VALVE ASSY - TANK PORT VALVE STEM WASHER, FLAT 5/" SCREW, SOCKET HEAD LIP SEAL BEARING RACE, THRU BEARING, THRUST BEARING, BALL INT. RET. RING RETAINING RING RETAINING RING O-RING O-RING NUT, SEALING HM & HM5 Round Key DOWEL PIN DOWEL PIN CARTRIDGE, FRONT SPACER, 3L SEAL C GEROTOR HOUSING HM, COATED ITEM NO. PART NUMBER DESCRIPTION QTY Series Applicator

29 Spike Valve Item Vendor Part # Fast Part # Description Qty. -/BH Hose, Fertilizer AR Clamp -/ " Worm Gear 3 M050BRB Manifold " FP To -/' HB 4 M50G Gasket " Full Port 5 FC Clamp " Full Port M000TEE Tee " Full Port 7 FC Clamp " Manifold G Gasket " 4 9 MPRV Manifold Pressure Spike Valve 0 M00BRB '' Manifold X 90 Degree Bar Clamp Stainless '' BH Hose " EDPM AR 8300 Series Applicator 9

30 830 And Agitation And Control 8300 Applicator Item Vendor Part # Fast Part # Description Qty. M0000TEE Manifold Tee X Y970-PP 5009 Agitation Nozzle 3 TEE Tee 3/4" NPT 4 NIP Nipple 3/4" X 5 TF Bulkhead 3/4" NPT HB Hose Barb Elbow 3/4" NPT X " Hose Clamp " Hose 8 BH Hose " EDPM AR 9 M00BRB Manifold " HB 0 FC Clamp " Manifold 00G Gasket " Manifold MV00CF Valve, Stubby " *AR* Quantities dependent on # of Ball Valve on unit Series Applicator

31 838 And Agitation And Control 8300 Applicator Item Vendor Part # Fast Part # Description Qty. FC Clamp " Manifold 00G Gasket " Manifold 3 MV00CF Valve, Stubby " 4 Y970-PP 5009 Agitation Nozzle 5 TEE Tee 3/4" NPT NIP Nipple 3/4" X 7 TF Bulkhead 3/4" NPT 8 HB Hose Barb Elbow 3/4" NPT X " Hose Clamp " Hose 0 BH Hose " EDPM AR M00BRB Manifold " HB 8300 Series Applicator 3

32 838 And 834 Ball Valve Mount 3 4 Item Vendor Part # Fast Part # Description Qty. Bolt Hex Head / X GR5 Zp Plate Attaching Bracket Ball Valves 4 3 Nut Hex Head Nylock Zp Series Applicator

33 830 And 833 Valve Stack Item Vendor Part # Fast Part # Description Qty. -/BH Hose -/" EDPM AR Clamp Stainless -/" In 3 M0050BRB Manifold " Std To HB 4 FC Clamp " Std Port *AR* 5 M50G Gasket " Std Port *AR* Flow Meter 0P Control Valve -/" 8 M00CPG Manifold Elbow *BEC Ball Valve *AR* 0 M00CPG90SH Manifold Elbow 90 Short M00PLG Manifold Plug.5 Port FAST454GXX Gauge Fast Logo 0 Psi 3 CP37--30SS Retaining Clip *AR* 4 CP VI O Ring Viton *AR* Quick Connect 90 *AR* Clamp " Hose *AR* 7 BH Hose " EDPM AR * Number of valves in bank *AR* Quantities dependent on # of ball valves on unit Series Applicator 33

34 838 Valve Stack Item Vendor Part # Fast Part # Description Qty. M00PLG Manifold Plug 45*BEC Ball Valve *AR* 3 CP37--30SS Retaining Clip *AR* 4 CP VI O Ring Viton *AR* Quick Connect 90 *AR* Control Valve -/" 7 FC Clamp " Std Port *AR* 8 M50G Gasket " Std Port *AR* Flow Meter 0P 0 M0050BRB Manifold " Std To -/"HB Clamp Stainless -/" In -/BH Hose -/" EDPM AR 3 M00TEE Tee " Std Port 4 M00CPG Manifold Coupling 45 5 M00PLG Manifold Plug.5 Port FAST454GXX Gauge Fast Logo 0 Psi Clamp " Hose *AR* 8 BH Hose " EDPM AR * Number of valves in bank *AR* Quantities dependent on # of ball valves on unit Series Applicator

35 834 Valve Stack Item Vendor Part # Fast Part # Description Qty. BH Hose " EDPM AR 45*BEC Ball Valve *AR* 3 M50G Gasket " Std Port *AR* 4 FC Clamp " Std Port *AR* 5 M00PLG Manifold Plug FAST454GXX Gauge Fast Logo 0 Psi 7 M00PLG Manifold Plug.5 Port 8 M00CR Cross " Std Port Control Valve -/" 0 M00CPG Manifold Elbow Flow Meter 0P M0050BRB Manifold " Std To HB Clamp Stainless -/" In 4 -/BH Hose -/" EDPM AR 5 CP37--30SS Retaining Clip *AR* Quick Connect 90 *AR* Clamp " Hose *AR* 8 CP VI O Ring Viton *AR* * Number of valves in bank *AR* Quantities dependent on # of ball valves on unit Series Applicator 35

36 Bar Feedline Plumbing Item Vendor Part # Fast Part # Description Qty. BH Hose " EDPM Hose Clamp " Per Section 3 T3400T 5308 Hose Barb Tee 3/4 MPT To " Hose 4 3/4BH Hose 3/4" EDPM AR Hose Clamp 3/4" AR 3T34F 5300 Tee 3/4" Hose Barb X 3/4" FPT AR 7 SL Elbow Street 3/4" X 90 Pt 8 HCLSS Hose Clamp 7" Per Coulter 9 NIP Nipple Close 3/4" Pt 0 UV Valve 3/4" Union HB Hose Barb 3/4" Pt X 3/4" HB HB Hose Barb 90 3/4" Pt X 3/4" HB NYB Nozzle Double 3/4" Hose /4" F - For Knife Injectors AR 4 HB05/ Hose Shank /4" Pt X 3/8" Hose Barb - For Knife Injectors Per Coulter 5 3/8BH Hose 3/8" EDPM AR Hose Clamp 3/8" Per Coulter Mount Nozzle Body Per Coulter NYB Nozzle Single 3/4" Hose /4" F AR Optional valve, #0 and #7, #9 and # shuts off flip wing at 30 width Series Applicator

37 Raven SCS450 Console ITEM DESCRIPTION RAVEN PART # Manual Adj. Switch Rate/Rate/Manual Switch Power Switch Boom Switch Master Switch Mounting Bracket Mounting Knob Fuse Holder Fuse, 5 Amp Console Control Cable (0 ft.) Console Control Cable (3 ft.) Flow Control Cable ( ft.) Flow Control Cable ( ft.) Flow Control Cable (4 ft.) Flow Meter Cable Ext. ( ft.) Flow Meter Cable Ext. ( ft.) Flow Ext. Cable ( ft.) Flow Ext. Cable (4 ft.) Assorted Terminal Kit Switch Cover Set Filler Spacers Face Plate Assembly Display Board Spacer LCD Display Board Processor Board (Serial Interface) Connector Plate Assembly (Serial Interface) Back Assembly SCS 450 Console (Serial Interface) Series Applicator 37

38 Control Console Harness Applicator Series Applicator

39 Control Console Harness Applicator 8300 Series Applicator 39

40 Control Console Harness Applicator Series Applicator

41 Hydraulic System For Pump Item Fast Part # Description Ace NV-SAE Hose Tip PA Hose Pressure To Valve PA Hose Pressure To Valve Hyd Fitting PC Valve 7.5 Gpm 0099 PC Valve 3 Gpm 5 PA Hose Pressure To Pump PA Hose Pressure To Pump 00 Hydraulic Fitting PA Hose Pump Return PA Hose Pump Return Hypro Series Applicator 4

42 Fasse Block Harness Series Applicator

43 Item Vendor Part # Fast Part # Description Qty. Row FDM4R7-4FJX-4FJX90M FDM4R7-4FJX-4FJX90M Cylinder 40TD08-50 DIA 4 X 8" Stroke NS 79 Kit Seal 4.0 Bore X.5 Rod Fitting Adapter 8 ORB M/F.093 Orifice 5 00 Fitting Adapter JIC Swivel Run Tee TO FDMR7-FJX90M-8FJX Fitting Adapter Tee 8 JIC FDM8R7-8MBO-8FJX Fitting Adapter JIC Tee To FDM4R7-8MBO-4FJX90M NV-SAE-M FDMR7-FJX90M-8FJX FDMR7-8MBO-FJX-90M FDMR7-8MBO-FJX Fitting Adapter 8 ORB To 4 JIC R0.045 (Used On 0004) Cylinder 30TD4-50 3" X 4" Stroke NS 4908 Kit Seal 3.0 Bore X.5 Rod Cylinder Dual Function 45 WD.5 X.8 Wk NS PMI000 Kit Seal 4.5 Bore X.0 Rod FDM4R7-4FJX-4FJX Fitting Adapter 8 ORB M/F.047 Orifice Fitting Adapter 8 ORB To 4 JIC Gauge Pressure Psi 005 Fitting Adapter Fitting Adapter JIC Swivel Run Tee TO FDMR7-FJX-FJX90M Fitting Adapter ORB To JIC Block Down Pressure (PDCP5-Pt-S) Fitting Adapter ORB To JIC FDM4R7-FJX-4FJX90M- 9 TO40040 Fitting Adapter Fitting Adapter ORB Male FDMR7-FJX-FJX90M FDM4R7-FJX-4FJX90M FDM4R7-4FJX-4FJX90M FDM4R7-FJX-4FJX90M Fitting Adapter 8 ORB To 4 JIC (Used On 007) Add For Row Option 8300 Series Applicator 43

44 Toolbox Carrier Item Fast Part # Description Injector Knife Quantity Quantity 84 Toolbox Holder 55 Bolt Hex Head / X -/: GR 5 Zp Grab N Go Toolbox 4 39 Nut Hex Head /" Centerlock Zp 5 3 Nut Hex Head /" Jam Zp 5 Bolt Hex Head / X : Gr 5 Zp Series Applicator

45 Kit Contents Item Fast Part # Description Injector Knife Quantity Quantity Nozzle, Single Hose Shank Nyb Nozzle, Double Hose Shank Nyb Nozzle, Single Hs Conn /4"F 5000 Nozzle, Double Hs Conn /4"F Nozzle, Ss /4" Tee 5005 Nozzle, Ss Ca Tip, Ss Teejet /4" X /4" Male Connector /" EDPM Gasket " EDPM Gasket " EDPM Gasket Hose Shank Assy 5300 Barb Hose /4" X 3/8" /8"X3/8" Hose Mender W/ Stop 5303 Nipple:/4" Mptx" Mpt 5304 Str. Elb:/4" Mptx/4" Fpt Clamp, " Std Worm Screw Clamp, " Full Worm Screw Clamp, 3" Worm Screw Clamp -/" T-Bolt Hose.8" Clamp, Stainless 3/4" # Clamp, Stainless " # Clamp, Hose 5/" Seal, EDPM Rubber Cap Q.T. Ny.Lt.Yellow Plate Orifice, Stainless Steel Locking Collar, Std 30 Degrees 7500 Rock Guard With Pin /8 X /" Set Screw, Ss Mntg Brkt F/Wiese CO-50 Knife " Deep Grab & Go Toolbox AC4005 O-Ring, Volute Seal AC405 Seal, 5/8" Shaft, Viton-C AC5700 Repair Kit AP44030 /4 X /4" Union Connector 3 3 AP /4 X /4" Female Adaptor AXGC3000XXL XXL Green Gloves LAXNVGOGGLESL Goggles BJ00SHIM " Shim BJHM075 3/4" X 3/4" Hose Barb BJHM00 " X " Hose Barb BJHM50 -/" X -/" Hose Barb CLFBS004 5/8 X Square Head Set Screw PL707TB Reduran WA047 Cable Tie, 5" Hvy Duty 0 0 VI3K9438 Barb:3/8" Hb For 807 Nut-Poly Series Applicator 45

46 Lighting LS LS Item Vendor Part # Fast Part # Description Qty Light Red Surface Mounting Light Assembly 5 Washer /4" Zp Washer Lock 5/ Zp Bolt HH 8 X 5 mm 8.8 Zp Lamp V Bayonet Base Included W/ Harness Light 8% (Includes 7&8) 7 WA3778 Cable Guard Spring Repair Part 8 WA3773 Plug Tractor 7 Pin Repair Part Light Amber Pedestal Mount Lamp 0 5 Lamp V Twist Base Included W/ Wiring Harness Light Extension 8xx 03 Bolt HH /4 X -/" GR5 Zp Module Light (RE59) 4 35 Nut HH /4" Center Lock Zp LS Left Side Connector Series Applicator

47 Notes 8300 Series Applicator 47

48 Fast Sprayers County Road 44 Mountain Lake, MN Toll Free Voice Fax Part Number Applicator Parts Manual 4//03