Parts Book 612N, 812N, 642N, 842N, 862N 714NT, 814NT, 742NT, 842NT, 862NT

Transcription

1 Parts Book 612N, 812N, 642N, 842N, 862N 714NT, 814NT, 742NT, 842NT, 862NT Wishek Mfg. LLC 112 South 2nd Street PO Box 185 Wishek, ND (701)

2 WARRANTY/ PARTS RETURN POLICY 2

3 Orientation Any reference to left (L) or right (R) sides of the frame of the disc is to be understood as viewing from the rear of the unit looking forward. References to gang components (scrapers) as to left hand (LH) or right hand (RH) is to be understood as the direction material is deflected off the blade. On offset models, RH would refer to the front gang and LH would refer to the rear gang. On tandem models, RH would refer to right side front gangs and left side rear gangs: LH would refer to left side front gangs and right side rear gangs. Serial Numbers Every disc has a serial number plate attached to the front frame tube. These serial numbers are consecutively assigned to each unit as it is manufactured. To aid in parts ordering, always reference the serial number plate to provide an accurate means of determining the proper parts. Modifications It is the policy of Wishek Mfg. LLC to improve its products whenever possible or practical to do so. Wishek Mfg. LLC reserves the right to make changes, improvements, and modifications at any time without incurring the obligation to make such changes, improvements, and modifications on any equipment sold previously. Abbreviations ASSY...Assembly GR..Grade of Bolt HD...Heavy Duty LH...Left Hand LNT..Lowered Wing Tandem MF...Main Frame MTG..Mounting N..Offset Model NC...National Coarse Thread NF.National Fine Thread NT...Tandem Model OAL.Over All Length OCL...Over Center Lockdown RH..Right Hand W...With W/O...Without 3

4 CONTENTS Main Frame... 5 Hitch 6 Hitch Parts. 7 Leveling Assembly 8 Hydraulic Leveling. 9 Running Gear 10 H611-6 Bolt Hub. 11 H618-6 Bolt Hub Bolt Hub Bolt Hub 14 Gang 15 Gang Bearings.. 16 Spring Cushion.. 17 Disc Blades 18 Standard Scrapers 19 Bearing Standard Scrapers. 20 Spool Scrapers.. 21 Rotary Scrapers 22 4" X 12" Non Phasing Cylinder /2" X 12" Phasing Cylinder. 24 4" X 12" Phasing Cylinder 25 Cylinder Stops Wing Fold Cylinder--5" X 44".. 27 Wing Fold Cylinder--5" X 36".. 28 Wheels & Tires.. 29 OCL Wing Lock--Small (20' & 22').. 30 OCL Wing Lock--Common Parts.. 31 OCL Wing Lock--Large 32 OCL Cylinder. 33 Wing Leveling (Lollipop) 34 Light Kit.. 35 Decals. 36 Misc. 37 4

5 MAIN FRAME Lift Cylinder Mount Pin-Wing To Main Frame 6 2, Pin- Hitch To Main Frame U-Clamp 1 3/4" (4" X 8" Frame) U-Clamp 1 3/4" (4" X 6" Frame) Nut (1 3/4") Washer (1 3/4") Hose Clamp Collar With Hole Quantity depends on size and model 2. Winged models only 3. Over center lockdown models-see OCL Pages 30 & 32-Note 3 5

6 HITCH Hitch Assembly-- Specify Model Pin--Hitch to Main Frame Flange Weld Hose Holder Weldment Hose Holder Bracket Weld On Bracket--2 1/4" Hole Spacing Weld On Bracket--3" Hole Spacing Hitch Jack Mount--Weld On /8" OAL X 1 5/16" Diameter 2. Used on units built after

7 HITCH PARTS Long Wrench Short Wrench Clevis Option (Transport Only) Ag Hitch 2 1/4" Hole Spacing Ag Hitch 3" Hole Spacing Bolt 3/4" X 5 1/2" /4" Nut /4" Lockwasher Jack lb Dropleg Hitch Jack Mount Weld On Pin, Hitch Jack Hitch Jack Complete (Includes 9 & 10) Pin, Ag Hitch--1" X 7 1/4" Washer-2"OD X 1"ID X 1/4" (Not Shown) Cotter Pin 3/8" X 2" ( Not Shown) Jack Plate Jack Leg Pin 1 7

8 LEVELING ASSEMBLY Adjustment Tube-Specify Unit Jam Nut-2" Half Nut " Nut W/Set Screw " Adjustment Screw-52" Long " Adjustment Screw-56" Long Trunion Weld Assembly Pivot Assemly Pivot Assembly Spring 10" OAL Spring 14 1/4" OAL 2 3, Spring 16 1/4" OAL Washer Weld Assembly Large Spring Washer 1 1. Units built after foot and smaller units built before foot and larger units built before foot and smaller unit built after foot and larger units built after

9 HYDRAULIC LEVELING Hydraulic Leveling Complete Unit Shaft Lock Nut Piston Headgland Nut--Cylinder Tube U Cup O-Ring O-Ring Back-Up Ring Rod Seal U Cup Rod Wiper Seal Kit 1 1. Specify model and cutting width 2. Included in seal kit (1962) 9

10 RUNNING GEAR Wear Sleeve Wear Sleeve Main Frame Running Gear End Cap Wing Running Gear End Cap Grease Zerk--1/4 X Running Gear--General Spindle Specify model and serial number 2. See hub page 10

11 H611-6 BOLT HUB Hub Repair Kit Includes 1,5,6,7,8& Dust Cap (DC 13) 1 1, Cotter Pin 3/16" X 1 1/2" Spindle Nut Spindle Washer (WA17) Outer Bearing (LM67048) 1 1, Outer Cup (LM67010) 1 1, Inner Cup (LM29710) 1 1, Inner Bearing (LM29749) 1 1, Dust Seal (SE13) 1 1, Hub Only--6 Bolt Wheel Bolt 1/2"-20NF Complete Hub--6 Bolt Hub Repair Kit Spindle--32" 1 1. Included in hub repair kit (Part # 3078) 2. Included in complete hub (Part # 1525) 11

12 H618-6 BOLT HUB Hub Repair Kit Includes 1,5,6,7,8 & Dust Cap--DC , Cotter Pin--3/16" X 1 1/2" Spindle Nut Spindle Washer--WA Outer Bearing (LM48548) 1 1, Outer Cup (LM48510) 1 1, Inner Cup (25520) 1 1, Inner Bearing (25580) 1 1, Dust Seal TA 1 1, Wheel Bolt--9/16-18NF Hub Only (Includes 6 & 7) Complete Hub (H618) Hub Repair Kit Spindle--37" 1 1. Included in hub repair kit (Part # 3077) 2. Included in complete hub (Part # 1526) 12

13 8 BOLT HUB Repair Kit: Includes Items 1,4,5,6,7, Dust Cap 1 1, Spindle Nut Spindle Washer Outer Bearing (2790) 1 1, Outer Bearing Cup (2720) 1 1, Inner Bearing Cup (3720) 1 1, Inner Bearing (3780) 1 1, Dust Seal (25091) 1 1, Stud Bolt--9/16-18NF Stud Nut--9/16-18NF Cotter Pin 3/16 X 1 1/ Hub Only (Includes 5 & 6) Hub Repair Kit (See Note 1) Complete Hub ( See Note 2) Spindle--49" OAL (Centerfold Models) Spindle--42" OAL 1 1. Items included in hub repair kit (Part # 3076) 2. Items included in complete hub (Part # 1527) 13

14 10 BOLT HUB Hub Repair Kit Includes Part # s 6, 7, 8, 9 & Dust Cap Gasket Cotter Pin--1/4" X 2 1/2" Spindle Nut--1 1/ Spindle Washer--3/8" X 3" Outer Bearing (460) 1 1, Outer Cup (453A) 1 1, Inner Cup (39520) 1 1, Inner Bearing (39585) 1 1, Dust Seal (CR30087) 1 1, Hub Only (Includes 7 & 8) Stud Bolt--3/ Stud Nut--3/4-16 Flange Bolt-Dust Cap--5/16" X 1/2" Hub Repair Kit Complete Hub Spindle--50" Long--Dual Wheels Spindle--34" Long--Single Wheels 1 1. Included in hub repair kit (Part # ) 2. Included in complete hub (Part # ) 14

15 Gang Nut W/Set Screw Set Screw (9/16" X 1") End Washer (Replaces 1507) /2 Spacer--13" Spacing (8 3/8" OAL) /2 Spacer--11" Spacing (6 3/8" OAL) /2 Spacer--10" Spacing (5 3/8" OAL) /2 Spacer--9" Spacing (4 3/8" OAL) Gang Shaft (1 15/16" Dia)--Specify Length Cast 1/2 Spacer (2 3/4" OAL) Spacer--13" Spacing (12 1/2" OAL) Spacer--11" Spacing (10 1/2" OAL) Spacer--10" Spacing (9 1/2" OAL) Spacer--9" Spacing (8 1/2" OAL) End Washer (1/4") 1 8 Gang Tube (Specify Size & Length) 1 15

16 GANG BEARINGS ITEM PART# DESCRIPTION QTY NOTES U-Clamp--3/4" X 6" X 6" Lockwasher--3/4" (Not Shown) Nut--3/4" (Not Shown) Bearing Standard (28" & 30" Blades) Bearing Standard (24" & 26" Blades) /8" NPT 90 Degree Zerk Bearing Housing Bearing (2" Bore X 4.9" OD) Bolt--1/2" x 3 1/2" NC Lockwasher--1/2" Nut--1/2" Bearing Guard Washer Bearing Guard 1 1, Bolt--1/2"x4 1/2"NC Optional equipment 2. Replaces LH bearing guard and RH bearing guard 16

17 SPRING CUSHION Scraper Bar Bracket--24" Blades Scraper Bar Bracket--26" Blades Scraper Bar Bracket--28" Blades Scraper Bar Bracket--30" Blades U-Clamp--5/8" X 2" X 3 7/8" Flange Nut--5/8" Grease Zerk--1/4 X U-Clamp--3/4" X 6" X 6" Nut--3/4" Lockwasher--3/4" (Not Shown) Pin--1 15/16" X 10 3/4" Bolt--3/4" X 9" Bushing--T-Bolt Spring Bucket--24"-26" Blade Models Spring Bucket--28"-30" Blade Models Spring--6 1/2" X 15 3/8" Spring End Cap T-Bolt--1 3/4" X 19 1/2" Half Nut--1 3/4" Nut--3/4" Lockwasher--3/4" Bolt--1/2" X 3" Nut--1/2" Top Lock 2 17

18 BLADES /16" X 18" Blade /4" X 20" Blade /4" X 22" Blade /16" X 24" Blade /16" X 26" Blade /16" X 28" Blade /16" X 30" Blade /16" X 32" Blade N 5/16" X 24" Notched Blade /16" X 26" Notched Blade /16" X 28" Notched Blade /16" X 30" Notched Blade /16" X 32" Notched Blade /2" X 36" Notched Blade " center hole /4" center hole 18

19 STANDARD SCRAPERS Mud Scrapers--RH--24"Blade Mud Scrapers--LH--24" Blade Mud Scrapers--RH--28" Blade Mud Scrapers--LH--28" Blade Standard Scraper Blade--3/8" Thick Standard Scraper Blades--3/16" Thick Scraper Mount Bolt--1/2" X 1 1/2" Nut--1/2" Lockwasher--1/2" " X 2" Scraper Tube--Specify Length U-Clamp--5/8" Flange Nut--5/8" 2 19

20 BEARING STD SCRAPER Left Hand Scraper Right Hand Scraper Left Hand Scraper Complete--13" Spacing Left Hand Scraper Complete--11" Spacing Left Hand Scraper Complete--10" Spacing Right Hand Scraper Complete--13" Spacing Right Hand Scraper Complete--11" Spacing Right Hand Scraper Complete--10" Spacing Left Hand Weldment--11" & 13" Spacing Left Hand Weldment--10" Spacing Left Hand Adjust Plate--13" Spacing Left Hand Adjust Plate--10" & 11" Spacing Right Hand Weldment--11" & 13" Spacing Right Hand Weldment--10" Spacing Right Hand Adjust Plate--13" Spacing Right Hand Adjust Plate--10" & 11" Spacing /8" U-Clamp Flange Nut--5/ Bolt--1/2 X 1 1/ Flange Nut--1/ Flat Washer--1/2 2 20

21 SPOOL SCRAPER Spool Scraper--Left Hand Spool Scraper--Right Hand U-Clamp--5/8" Flange Nut--5/8" Scraper Mount Bolt--1/2" X 1 1/2" Lockwasher--1/2" Nut--1/2" Complete Assembly--Specify RH or LH 1 21

22 ROTARY SCRAPER Nut Blade Washer Assembly Bearing Bearing Bracket RH (Pictured) Bearing Bracket LH (Not Shown) Bolt--5/8" X 1 1/2" Flange Head Complete Assembly--RH Complete Assembly--LH Includes Part #'s 1, 2, 3, 4, 5, & 6 22

23 4 X 12 CYLINDER 18 FOOT & SMALLER MAIN FRAME (1 1/2 CYLINDER PINS) Complete Cylinder--4" X 12" Barrell Only Rod Only Pin--1 1/2" X 4 1/4" Bolt--1/2" X 3" Nut--1/2" Top Lock Shaft Lock Nut Piston--4" Phasing Headgland--4" Phasing Cylinder Tube Nut--4" Wear Ring Piston Seal O Ring Rod Seal U Cup O Ring Back Up Ring Rod Wiper Seal Kit--4" Phasing 1 1. Included in seal kit 23

24 4 1/2 X 12 PHASING CYLINDER 20 FOOT & LARGER MAIN FRAME (1 1/2 CYLINDER PINS) Complete Cylinder--4 1/2" X 12" Phasing Barrell Only Shaft Only Pin--1 1/2" X 4 1/4" Bolt--1/2" X 3" Nut--1/2" Top Lock Shaft Lock Nut Piston--4 1/2" Phasing Headgland--4 1/2" Phasing Cylinder Tube Nut--4 1/2" Wear Ring Piston Seal O Ring Rod Seal U Cup O Ring Back Up Ring Rod Wiper Seal Kit--4 1/2" Phasing 1 1. Included in seal kit 24

25 4 X 12 PHASING CYLINDER 20 FOOT & LARGER WING CYLINDER (1 1/2 CYLINDER PINS) Cylinder Complete--4" X 12" Phasing Barrell Only (1 1/2" Pins) Shaft Only (1 1/2" Pins) Pin--1 1/2" X 4 1/4" Bolt--1/2" X 3" Nut--1/2" Top Lock Shaft Lock Nut Piston--4" Phasing Headgland--4" Phasing Nut--Cylinder Tube--4" Wear Ring Piston Seal O Ring Rod Seal U Cup O Ring Back Up Ring Rod Wiper Seal Kit--4" Phasing 1 1. Included in seal kit 25

26 CYLINDER STOPS Pin--1/2" X 4 3/4" Hair Pin Clip Transport Lockup Bracket " Segment Only /2" Segment Only Depth Control Kit Complete Includes pin (1979) and clip (1980) 2. 2" cylinder shaft 26

27 WING FOLD CYLINDER (5 X 44 CYLINDER - 20 TO 26 WINGED MODELS & NEWER) Complete Cylinder--5' X 44" Barrell Only Shaft Only Shaft Lock Nut Piston Headgland Cylinder Nut O-Ring--Piston Wear Ring Piston Seal O-Ring Back-Up Ring Rod Seal Rod Wiper Seal Kit Pin--1 1/2" X 4 1/4" Bolt--1/2" X 3" Nut--1/2" Top Lock 2 1. Included in seal kit (104625) 27

28 WING FOLD CYLINDER (5 x 36 CYLINDER - 28 TO 38 WINGED MODELS & NEWER) Complete Cylinder--5" X 36" Barrell Only Shaft Only Shaft Lock Nut Piston Headgland Cylinder Nut O-Ring--Piston Wear Ring Piston Seal O-Ring--Piston Back-Up Ring Rod Seal Rod Wiper Seal Kit Pin--1 1/2" X 4 1/4" Bolt--1/2" X 3" Nut--1/2" Top Lock 2 1. Included in seal kit (104625) 28

29 WHEELS & TIRES Rim--15" X 8" X 6 Hole (11L X 15" Tire) Rim--15" X 10" X 6 Hole (12.5L X 15" Tire) Rim--15" X 10" X 8 Hole (12.5L X 15" Tire) Rim X 22.5 X 8 Hole (385/65R22.5) Rim X 22.5 X 10 Hole (385/65R22.5) L X 15" Tire L X 15" Tire /65R22.5" Tire Assembly--8 Bolt Rim W/12.5L X 15" Tire Assembly--8 Bolt Rim W/385/65R22.5 Tire Assembly-10 Bolt Rim W/385/65R22.5 Tire 1 29

30 OCL WING LOCK (SMALL) 20 TO 22 MODELS Tower Assembly--Weldment Bellcrank Assembly Pin--14 5/8" Long Pin--1" Dia X 2 1/4" Long Washer--1 ID X 1 1/2 OD 18 ga Cotter Pin--3/16 X 1 1/ Control Arm Cylinder--5" X 20 1/8" Cylinder Anchor--Weldment Side Plate Pin--17 1/16" Long Pin--11 1/4" Long W/ Grease Zerk 1 2, 3 1. Specify front or rear & LH or RH 2. Center wing pivot pin with grease zerk 3. Front & rear wing pivot pins with grease zerk 8 3/8" long--part #

31 OCL WING LOCK COMMON PARTS (ALL OCL UNITS) Bolt--1/2" X 3" Nut--1/2" Top Lock Cotter Pin--3/8" X 3" Collar--Weldment Bolt--3/4" X 9" Adjust Base Attaching Plate Pin Adjustment Bolt (Lollipop) Nut--1 1/4" Jam Nut--1 1/4" Lockwasher--3/4" Nut--3/4" Grease Zerk--1/4 X Washer--1 1/4" Carriage Bolt--3/4 X Bolt--3/4 X Lock Nut--3/4 6 31

32 OCL WING LOCK (LARGE) 24 TO 26 MODELS Tower Assembly--Weldment Bellcrank Pin--14 5/8" Long Pin--1" Dia X 2 1/4" Long Control Arm Cylinder--5" X 24 3/4" Cylinder Anchor--Weldment Side Plate Pin--17 1/16" Long Pin--11 1/4" Long W/ Grease Zerk 1 2, Washer--1 ID X 1 1/2 OD 18 ga Cotter Pin--3/16 X 1 1/ Specify front or rear & LH or RH 2. Center wing pivot pin with grease zerk 3. Front & rear wing pivot pins with grease zerk--8 3/8" long--part #

33 OCL CYLINDER-5 BORE Complete Cylinder--5" X 24 3/4" Complete Cylinder--5" X 20 1/8" Barrell Only--5" X 24 3/4" Barrell Only--5" X 20 1/8" Shaft Only--2 1/2" X 29 3/8" Shaft Only--2 1/2" X 24 1/2" Lock Nut--1 1/4" Piston Headgland Cylinder Nut O-Ring--Piston Wear Ring Piston Seal O-Ring--Piston Back Up Ring Rod Seal Rod Wiper Seal Kit Grease Zerk--1/ Nut--1/2" Top Lock Pin--17 1/16" Long Pin--14 5/8" Long Bolt--1/2" X 3" 2 1. Large over center lockdown units (24'-26') 2. Small over center lockdown units (20'-22') 3. Included in seal kit (107721) 33

34 WING LEVELING (LOLLIPOP) For Units With 1 1/2 Cylinder Pins Screw Only (Lollipop) Jam Nut--1 1/4" Nut--1 1/4" 1 34

35 LIGHT KIT Light Bracket Weldment Bolt--3/8" X 1" Sliding Light Bracket--RH Sliding Light Bracket--LH Warning Light--Amber Warning Light--Red Light Bracket--Long Light Bracket--Short Wiring Harness Winged models only 2. 2 used per bracket 3. Non-Winged models only 4. Specify model & size 35

36 DECALS Decal--612N Decal--642N Decal--714NT Decal--742NT Decal--812N Decal--814NT Decal--842N Decal--842NT Decal--862N Decal--862NT Decal--Wishek--5" X 24 1/2" Decal--Wishek--3" X 15" Decal--Leveling Adjust Decal--4" Cylinder Decal--4.5" Cylinder Decal--Warning Decal--Danger Decal--Check Wheels Decal--Caution--Lock Up Bracket Decal--Overhead Wing Hazard 1 36

37 MISC ITEM PART# DESCRIPTION QTY NOTES Green Paint Yellow Paint Black Paint Red Paint ep Grease (10 Pack) 1 37