Miniature Switches & Pilot Devices

Transcription

1 ø16mm - 6 Series Miniature 6 Series Miniature Switches and Pilot Devices Key features of the 5/8 6 Series include: 5/8 (16mm) mounting holes ocking lever removable contact blocks Solder terminal or PB terminal options Available assembled or as sub-components Worldwide approvals or ED illumination Snap action contacts U ecognized SA ertified File No. E55996 File No egistration No (E-stops) egistration No. J (all other switches) egistration No. J (Pilot ights) onforming to Standards EN , EN , VDE , U508, SA 22-2 N0.14 Operating Temperature Operation: 25 to +55 (without freezing), 45 to 85% rh Storage: -0 to +80 (without freezing) Vibration esistance 5 to 55Hz, 1.0 peak-peak amplitude max Shock esistance Mechanical ife Operating limit: 100 m/sec 2 (approximately 10G) Damage limit: 1000 m/sec 2 (approximately 100G) pushbuttons 2,000,000 operations minimum All others: 250,000 operations minimum Degree of Protection IP65 (conforming to IE 60529) ontact atings Dielectric Strength Insulation esistance ated Insulation Voltage ated Thermal urrent ontact esistance ated Operating urrent Switch unit: between live and ground: 2500 volt A, 1 minute between terminals of different poles: 2500 volt A, 1 minute between terminals of same pole: 1000 volt A, 1 minute Illumination unit: between live part and ground: 2500 volt A, 1 minute 100 MΩ minimum (using 500V D megger) 250 V A/D Gold ontacts (pcb): A Silver ontacts (solder): 5A 50 Ω maximum initial value Silver ontacts Gold lad ontacts (Solder Terminals) (PB terminals) 0V 125V 250V 0V 125V A resistive - A 2A A inductive - 0.1A A inductive - 2A 1.5A D resistive 0.1A - amp atings Buzzer atings Minimum ecommended oad (reference value for silver contacts) ontact Form ontact Material Electrical ife (at full load) amp urrent Draw amp ife D resistive 2A 0.4A - D inductive 1A 0.2A - 5 VA/D, 1mA Frequency 2 khz ± 500 HZ Amplitude 0.1m (at rated voltage) Operating Voltage 6V A/D or 12-24V A/D ± 10% Adjustable ycle 55 to 600 cycles per minute urrent Draw D: 7mA A: 20mA ife 1000 hrs. minimum Insulation Voltage 60V A/D Operating Temperature -20 to 55 (no freezing), 45 to 85% rh Solder Tab /PB Snap Action, Double Throw Solder Tab: Pure Silver /PB thermal Gold Plated Silver pushbuttons: 100,000 operations minimum (1800 operations / hour) All others: 100,000 operations minimum (1200 operations / hour) 5V D ED: 8mA 6V ED: 7mA 6V incandescent: 100 ma 12V ED: 8mA 12V incandescent: 50 ma 24V ED: 8mA 24V incandescent: 25 ma : 2000 hours./ed: 50,000 hours. (on pure D, half-life intensity) -0 USA: (800) 262-IDE or (408) , anada: (888) 17-IDE

2 Miniature ø16mm - 6 Series Non-Illuminated Pushbuttons (Assembled) Part Numbers: Non-Illuminated Pushbuttons Style Operation ontact ound ectangular Solder Tab PB A1B-M15-➀ A1B-M16-➀ A1B-A15-➀ A1B-A16-➀ B-M15-➀ B-M16-➀ B-A15-➀ B-A16-➀ AB-M15-➀ AB-M16-➀ AB-A15-➀ AB-A16-➀ A1B-M11V-➀ A1B-M12V-➀ A1B-A11V-➀ A1B-A12V-➀ B-M11V-➀ B-M12V-➀ B-A11V-➀ B-A12V-➀ AB-M11V-➀ AB-M12V-➀ AB-A11V-➀ AB-A12V-➀ Button olor odes olor ode Black Green ed Blue White Yellow B G S W Y Oversize ound Flush HA1B-M15-➀ HA1B-M16-➀ HA1B-M11V-➀ HA1B-M12V-➀ HA1B-A15-➀ HA1B-A16-➀ HA1B-A11V-➀ HA1B-A12V-➀ Oversize ound Extended HA1B-M25-➀ HA1B-M26-➀ HA1B-M21V-➀ HA1B-M22V-➀ HA1B-5-➀ HA1B-6-➀ HA1B-1V-➀ HA1B-2V-➀ Oversize Flush HB-M15-➀ HB-M16-➀ HB-M11V-➀ HB-M12V-➀ HB-A15-➀ HB-A16-➀ HB-A11V-➀ HB-A12V-➀ Oversize Extended HB-M25-➀ HB-M26-➀ HB-M21V-➀ HB-M22V-➀ HB-5-➀ HB-6-➀ HB-1V-➀ HB-2V-➀ Mushroom HA1B-M5-➀ HA1B-M6-➀ HA1B-M1V-➀ HA1B-M2V-➀ HA1B-A5-➀ HA1B-A6-➀ HA1B-A1V-➀ HA1B-A2V-➀ 1. In place of ➀ specify Button olor ode from table on. 2. Illuminated (translucent) style lenses also available, specify as such: instead of A1B-M15-➀ use A1B-M15-➁ in place of ➁ specify ens olor ode from next page.). PB terminal models also available with silver contacts (change 1 or 2 to 5 or 6 respectively, ie A1B-M11V-➀ becomes A1B-M15V-➀. USA: (800) 262-IDE or (408) , anada: (888) 17-IDE -1

3 ø16mm - 6 Series Miniature Non-Illuminated Pushbuttons (Sub-Assembled) ontact + Safety ever ock + Operator + Button = omplete Part Part Numbers: Operators Part Numbers: Buttons/enses Style Style Button ens ound ound A1-MO A1-AO AB6M-BK2-1 A6M-K2-➁ -MO -AO AB6Q-BK2-1 A6Q-K2-➁ Part Numbers: ontacts Appearance Gold ontacts Solder Tab HA-1 HA-2 PB HA-1V HA-2V ectangular ectangular Silver HA-5 HA-6 HA-5V HA-6V Oversize ound A-MO A-AO Oversize ound Flush AB6H-BK2-1 A6H-K2-➁ Part Number: Safety ever ock Appearance Part Number HA1B-MO HA1B-AO HA1A-B1-1 HA1A-1-➁* HA9Z-S Oversize HB-MO HB-AO Oversize ound Extended HA1A-B2-1 1 Button olor ode olor ode Black B Mushroom Oversize Flush Green ed G HA1B-MO HA1B-A0 HA-B1-1 HA-1-➁** Blue White S W Oversize Extended Yellow Y 1. In place of 1 specify Button olor ode from table on. 2. In place of ➁ specify ens olor ode from table on.. *requires HA1-M0 or HA1-A0 operator instead of HA1B-M0 or HA1B-A0. 4. **requires H-M0 or H-A0 instead of HB-M0 or HB-A0. Mushroom HA-B2-1 HA1A-B-1 HA1A--➁ ➁ ens olor ode olor ode Amber A Green G ed Blue S Yellow Y White W -2 USA: (800) 262-IDE or (408) , anada: (888) 17-IDE

4 Miniature ø16mm - 6 Series HA1B/HA1E E-Stop Miniature Switches and Pilot Devices: 5/8"(16mm) Key features of HA1B/HA1E Push lock Turn eset include: PB or Solder Terminals Quick elease ontact Blocks Positive Action ontacts 1 or 2 form B (SPST-) ontacts IP65 Protection 16mm Mounting Hole Tamper Proof onstruction Specifications File No. DK ontact atings 24VD/2A 120VA/A ontact Form 1 or 2 form B (2-SPST-) Termination PB or Solder Terminal ontact Material Silver Applicable Standards EN , U-508, SA No. 14 ated Insulation Voltage 250V Degree of Protection IP65, when mounted in an enclosure onditional Short-ircuit urrent &Short-ircuit Protective Device SA approved File No A (at 250V) 10A 250V Fuse, operation class am according to IE269-1 and IE269-2 Positive opening travel.4mm Positive Opening Minimum force required to achieve positive opening operation of all break contacts. 10. N (2 form B contacts) Operation Maximum travel including travel beyond the minimum travel position 5.5mm Maximum frequency of actuation 1,200 operations/hour Pollution Degree U ecognized File No. E55996 Part Numbers: Nameplates HAAV Yellow Plastic Ø 60mm Blank Engraved Emergency Stop EMEGEY STOP Part Number HAAV-0 HAAV-27 Direct Opening Action Part Numbers: Positive Action E-Stop Appearance Operation ontact Solder Tab PB E-Stop Pushlock/ Turn eset DPST() (2 form B) Short Body SPST- (1 form B) DPST- (2 form B) HA1B-V2E2 HA1E-V2S1 HA1E-V2S2 HA1B-V2E2V Button is nonremovable, available in red and as complete assembled unit only. Part Number: Buzzers (IP40) Buzzer-ectangular Appearance Operating Voltage Solder/Tab PB 6V A/D ± 10% AZ-1X2 AZ-1X2V 12V to 24 A/D ± 10% AZ-1X4 AZ-1X4V Frequency: 2khz ± 500 hz Amplitude: 80db at 0.1m Beeping: Adjustable from steady tone to 600 beeps per minute. USA: (800) 262-IDE or (408) , anada: (888) 17-IDE -

5 ø16mm - 6 Series Miniature Pilot ights (Assembled) Part Numbers: Pilot ights (ED) Style ound ectangle Oversize ound Voltage 24V A/D ED 24VA/D 24V A/D ED 24V A/D 24V A/D ED 24V A/D Solder Tab PB A1P-104-➁ A1P-107-➁ P-104-➁ P-107- ➁ AP-104-➁ AP-107-➁ A1P-104V-➁ A1P-107V-➁ P-104V-➁ AZP-107V-➁ AP-104V-➁ AP-107V-➁ ➁ ens/ed olor odes olor ode Amber A Green G ed Blue S Yellow Y White W Voltage/amp ode Voltage ode 5V D ED 1 6V A/D ED 2 12V A/D ED 24V A/D ED V A ED 8 6V A/D 5 12V A/D 6 24V A/D 7 24V A/D ED 24V A/D HA1P-104-➁ HA1P-107-➁ HA1P-104V-➁ HA1P-107V-➁ Oversize 24V A/D ED 24V A/D HP-104-➁ HP-107-➁ HP-104V-➁ HP-107V-➁ Oversize ound Unibody 24V A/D ED 24V A/D HA1P-14-➁ HA1P-17-➁ Oversize Unibody 24V A/D ED 24V A/D HP-14-➁ HP-17-➁ 1. In place of ➁ specify ens/ed olor ode from table. 2. amps also available in 5VD, 6V A/D, 12V A/D or 120V A, change 4 or 7 using Voltage/amp odes (ie A1P-10-➁ uses 12V A/D ED) USA: (800) 262-IDE or (408) , anada: (888) 17-IDE

6 Miniature ø16mm - 6 Series Pilot ights (Sub-Assembled) Terminals + Safety ever ock + amp Holder + amp + Operator + ens = ompleted Unit Part Numbers: Operators Part Numbers: enses Style Part Number Style Part Number ound ound A1P-0 A6M-K-➁ P-0 A6Q-K-➁ Part Numbers: amps Style ED Voltage 5V D 6V A/D 12V A/D 24V A/D 120 V A 6V A/D 12V A/D 24V A/D Part Number FTD-5➁ FTD-6➁ FTD-1➁ FTD-2➁ FTD-H2➁ H-06 H-14 H-28 ectangular ectangular In place of ➁ specify ED color code from table below. AP-0 A6H-K-➁ Part Numbers: Terminals Solder Appearance Tab PB Oversize ound Oversize ound HA1P-0 HA1A-P1-➁ HA-00 HA-00V Oversize Oversize Not required for unibody models. HP-0 HA-P1-➁ Part Number: amp Holder Appearance Part Number Oversize ound Unibody Oversize Unibody HA1P-00 In place of ➁ specify lens color code. e Part Number S t y l HA9Z-AH Part Number: Safety ever ock Appearance Part Number HA9Z- S HP-00 ➁ ens/ed olor odes olor ode Amber A Green G ed Blue S Yellow Y USA: (800) 262-IDE or (408) , anada: (888) 17-IDE -5

7 ø16mm - 6 Series Miniature Illuminated Pushbuttons (Assembled) Part Numbers: Illuminated Pushbuttons Style Operation amp Voltage ontact ound ectangular Oversize ound Oversize Mushroom 24V A/D ED 24V A/D 24V A/D ED 24V A/D 24V A/D ED 24V A/D 24V A/D ED 24V A/D 24V A/D ED 24V A/D 24V A/D ED 24V A/D 24V A/D ED 24V A/D 24V A/D ED 24V A/D 24V A/D ED 24V A/D 24V A/D ED 24V A/D 24V A/D ED 24V A/D 24V A/D ED 24V A/D Solder Tab PB A1-M154-➁ A1-M114V-➁ A1-M164-➁ A1-M124V-➁ A1-M157-➁ A1-M117V-➁ A1-M167-➁ A1-M127V-➁ A1-A154-➁ A1-A114V-➁ A1-A164-➁ A1-A124V-➁ A1-A157-➁ A1-A117V-➁ A1-A167-➁ A1-A127V-➁ -M154-➁ -M114V-➁ -M164-➁ -M124V-➁ -M157-➁ -M117V-➁ -M167-➁ -M127V-➁ -A154-➁ -A114V-➁ -A164-➁ -A124V-➁ -A157-➁ -A117V-➁ -A167-➁ -A127V-➁ A-M154-➁ A-M114V-➁ A-M164-➁ A-M124V-➁ A-M157-➁ A-M117V-➁ A-M167-➁ A-M127V-➁ A-A154-➁ A-A114V-➁ A-A164-➁ A-A124V-➁ A-A157-➁ A-A117V-➁ A-A167-➁ A-A127V-➁ HA1-M154-➁ HA1-M114V-➁ HA1-M164-➁ HA1-M124V-➁ HA1-M157-➁ HA1-M117V-➁ HA1-M167-➁ HA1-M127V-➁ HA1-A154-➁ HA1-A114V-➁ HA1-A164-➁ HA1-A124V-➁ HA1-A157-➁ HA1-A117V-➁ HA1-A167-➁ HA1-A127V-➁ H-M154-➁ H-M114V-➁ H-M164-➁ H-M124V-➁ H-M157-➁ H-M117V-➁ H-M167-➁ H-M127V-➁ H-A154-➁ H-A114V-➁ H-A164-➁ H-A124V-➁ H-A157-➁ H-A117V-➁ H-A167-➁ H-A127V-➁ HA1-M54-➁ HA1-M14V-➁ HA1-M64-➁ HA1-M24V-➁ HA1-M57-➁ HA1-M17V-➁ HA1-M67-➁ HA1-M27V-➁ HA1-A54-➁ HA1-A14V-➁ HA1-A64-➁ HA1-A24V-➁ HA1-A57-➁ HA1-A17V-➁ HA1-A67-➁ HA1-A27V-➁ 1. In place of➁ specify lens color code from table at. 2. amps also available in 5V D, 6V A/D, 12 V A/D or 120V A, change 4 or 7 using voltage/lamp codes (ie A1P-10-➁ uses 12V A/D ED).. PB terminal models also available with silver contacts (change 1 or 2 to 5 or 6 respectively, ie A1-M114V-➀ becomes A1-M154V-➀. ➁ ens olor odes olor ode Amber A Green G ed Blue S Yellow Y White W Voltage/amp ode Voltage ode 5V D ED 1 6V A/D ED 2 12V A/D ED 24V A/D ED 4 120V A ED 8 6V A/D 5 12V A/D 6 24V A/D USA: (800) 262-IDE or (408) , anada: (888) 17-IDE

8 Miniature ø16mm - 6 Series Illuminated Pushbuttons (Sub-Assembled) ontacts + Safety ever ock + amp Holder + amp + Operator + ens = ompleted Unit Part Numbers: Operators Part Numbers: enses Style Style Part Number ound ound A1-MO A1-AO A6M-K2-➁ Part Numbers: amps Appearance Voltage Part Number ED 5V D 6V A/D 12V A/D 24V A/D 120V A 6V A/D 12V A/D 24V A/D FTD-5➁ FTD-6➁ FTD-1➁ FTD-2➁ FTD-H2➁ H-06 H-14 H-28 -MO -AO A6Q-K2-➁ In place of ➁ specify ED color code from table below. ectangular A-MO A-AO ectangular A6H-K2-➁ Part Numbers: ontacts Appearance ontacts Solder Tab PB Gold HA-10 HA-20 HA-10V HA-20V Oversize ound Oversize ound HA1-MO HA1-A0 HA1A-1-➁ Silver HA-50 HA-60 HA-50V HA-60V Oversize H-MO H-AO Oversize HA-1-➁ Part Number:amp Holder Appearance Part Number HA9Z-AH Mushroom HA1B-MO HA1B-AO Mushroom HA1A--➁ Part Number: Safety ever ock Appearance Part Number HA9Z-S In place of ➁ specify ens olor ode from table. ➁ ens/ed olor odes olor ode Amber A Green G ed Blue S Yellow Y White W USA: (800) 262-IDE or (408) , anada: (888) 17-IDE -7

9 ø16mm - 6 Series Miniature Selector Switches (Assembled) Part Numbers: Selector Switches ound Style Position ontact Position 45 -Position 90 2-Position Solder Tab PB A1S-26 A1S-22V A1S-216 A1S-212V A1S-6 A1S-2V A1S-16 A1S-12V left A1S-26 A1S-22V 2-Way spring return A1S-6 A1S-2V S-26 S-22V S-216 S-212V ontact Operations (for all selectors) ontacts Operator Position and ontact Operation 2-pos. () -pos. () eft ight eft enter ight eft eft eft eft eft As viewed from front of switch. ight ight ight ight ight S-6 S-2V 45 -Position S-16 S-12V left S-26 S-22V 2-Way spring eturn S-6 S-2V ectangular 90 2-Position AS-26 AS-22V AS-216 AS-212V AS-6 AS-2V 45 -Position AS-16 AS-12V left AS-26 AS-22V 2-Way spring eturn AS-6 AS-2V Oversize ound 90 2-Position HA1S-26 HA1S-22V HA1S-216 HA1S-212V 45 -Position HA1S-6 HA1S-2V HA1S-16 HA1S-12V left HA1S-26 HA1S-22V 2-Way spring eturn HA1S-6 HA1S-2V 1. All assembled selector switches use contacts. 2. For contacts see sub-components on next page.. PB terminal models also available with silver contacts (change 1 or 2 to 5 or 6 respectively, ie A1S-212V becomes A1S-216V USA: (800) 262-IDE or (408) , anada: (888) 17-IDE

10 Miniature ø16mm - 6 Series Selector Switches (Sub-Assembled) ontacts + Safety ever ock + Operator = omplete Part Part Numbers: Operators Style Position Function Part Number ound 2 from A1S-2Y A1S-21Y 2 from from left from both from from from left from both A1S-Y A1S-1Y A1S-2Y A1S-Y S-2Y S-21Y S-Y S-1Y S-2Y S-Y ectangular 2 Oversize ound 2 from from from left from both from from from left from both AS-2Y AS-21Y AS-Y AS-1Y AS-2Y AS-Y HA1S-2Y HA1S-21Y HA1S-Y HA1S-1Y HA1S-2Y HA1S-Y Part Numbers: ontacts Appearance ontacts Solder Tab PB Gold HA-1 HA-2 HA-1V HA-2V Silver HA-5 HA-6 HA-5V HA-6V 1. All assembled switches listed on previous page use contacts. 2. ontacts for use on 2 position selector switch only Part Number: Safety ever ock Appearance Part Number HA9Z-S USA: (800) 262-IDE or (408) , anada: (888) 17-IDE -9

11 ø16mm - 6 Series Miniature Part Numbers: Key Switches Terminal Type Style Operation ontacts Solder Tab PB A1K-26➂ A1K-22V➂ ound ectangular 90 2-Position 45 -Position 90 2-Position 45 -Position 90 2-Position A1K-216B A1K-212VB A1K-6➂ A1K-2V➂ left 2-Way spring return A1K-16➂ A1K-12V➂ A1K-26➂ A1K-22V➂ A1K-6D A1K-2VD K-26➂ K-22V➂ K-216B K-212VB K-6➂ K-2V➂ left 2-Way spring return K-16➂ K-12V➂ K-26➂ K-22V➂ K-6D K-2VD AK-26➂ AK-22V➂ Key Switches (Assembled) AK-216B AK-212VB AK-6➂ AK-2V➂ ontact Operations (for all selectors) ontacts Operator Position and ontact Operation 2-pos. () -pos. () eft ight eft enter ight ➂ Key etention Option odes ode Description A Key not retained in any position (removable in all positions) B Key retained in position only Key retained in left position only D Key retained in left and ( position only) E Key retained in center only ( position only) G Key retained and center ( position only) H Key retained left and center ( position only) eft eft eft eft eft As viewed from front of switch. ight ight ight ight ight Key cannot be removed from a spring-return position. 45 -Position left AK-16➂ AK-12V➂ AK-26➂ AK-22V➂ 2-Way spring return AK-6D AK-2VD Oversize ound 90 2-Position 45 -Position HA1K-26➂ HA1K-22V➂ HA1K-216B HA1K-212VB HA1K-6➂ HA1K-2V➂ left HA1K-16➂ HA1K-12V➂ HA1K-26➂ HA1K-22V➂ 1. In place of ➂ specify Key etention ode from next page. 2. All assembled key switches have contacts. For see subassembled on next page.. PB terminal models also available with silver contacts (change 1 or 2 to 5 or 6 respectively, ie A1K-22V➂ becomes A1K-26V➂. 2-Way spring return HA1K-6D HA1K-2VD USA: (800) 262-IDE or (408) , anada: (888) 17-IDE

12 Miniature ø16mm - 6 Series Key Switches (Sub-Assembled) ontacts + Safety lever lock + Operator = omplete Part Part Numbers: Operators Style Positions Operation Part Number ound 2 A1K-2➂ from A1K-21B 2 ectangular Oversize ound 2 2 from from left from both from from from left from both from from from left from both from from from left from both A1K-➂ A1K-1➂ A1K-2➂ A1K-D K-2➂ K-21B K-➂ K-1➂ K-2➂ K-D AK-2➂ AK-21B AK-➂ AK-1➂ AK-2➂ AK-D HA1K-2➂ HA1K-21B HA1K-➂ HA1K-1➂ HA1K-2➂ HA1K-D 1. In place of ➂ specify key removable code from table on. 2. Operator includes two keys. Part Numbers: ontacts Appearance Gold Silver ontacts 1. All assembled selectors listed on previous page use contacts. 2. contacts are for use on 2 position key switches only. Part Number: Safety ever ock Appearance Part Number HA9Z-S ➂ Key etention Option odes ode Description Key not retained in any position A (removable in all positions) B Key retained in position only Key retained in left position only D Key retained in left and ( position only) E Key retained in center only ( position only) G Key retained and center ( position only) H Key retained left and center ( position only) Key cannot be removed from a spring-return position. Solder PB Tab HA-1 HA-2 HA-5 HA-6 HA-1V HA-2V HA-5V HA-6V USA: (800) 262-IDE or (408) , anada: (888) 17-IDE -41

13 ø16mm - 6 Series Miniature Illuminated Selector Switches Part Numbers: Illuminated Selectors Switches Style Operation ontact Voltage ound ectangular 90 2-Position 45 -Position 90 2-Position 45 -Position 90 2-Position 45 -Position left 2-Way spring return left 2-Way spring return left 2-Way spring return 24V ED 24V ED 24V ED 24V ED 24V ED 24V ED 24V ED 24V ED 24V ED 24V ED 24V ED 24V ED 24V ED 24V ED 24V ED 24V ED 24V ED 24V ED Solder Tab PB A1F-264-➁ A1F-267-➁ A1F-2164-➁ A1F-2167-➁ A1F-64-➁ A1F-67-➁ A1F-164-➁ A1F-167-➁ A1F-264-➁ A1F-267-➁ A1F-64-➁ A1F-67-➁ F-264-➁ F-267-➁ F-2164-➁ F-2167-➁ F-64-➁ F-67-➁ F-164-➁ F-167-➁ F-264-➁ F-267-➁ F-64-➁ F-67-➁ AF-264-➁ AF-267-➁ AF-2164-➁ AF-2167-➁ AF-64-➁ AF-67-➁ AF-164-➁ AF-167-➁ AF-264-➁ AF-267-➁ AF-64-➁ AF-67-➁ A1F-224V-➁ A1F-227V- ➁ A1F-2124V-➁ A1F-2127V-➁ A1F-24V-➁ A1F-27V-➁ A1F-124V-➁ A1F-127V-➁ A1F-224V-➁ A1F-227V-➁ A1F-24V-➁ A1F-27V-➁ F-224V-➁ F-227V-➁ F-2124V-➁ F-2127V-➁ F-24V-➁ F-27V-➁ F-124V-➁ F-127V-➁ F-224V-➁ F-227V-➁ F-24V-➁ F-27V-➁ AF-224V-➁ AF-227V-➁ AF-2124V-➁ AF-2127V-➁ AF-24V-➁ AF-27V-➁ AF-124V-➁ AF-127V-➁ AF-224V-➁ AF-227V-➁ AF-24V-➁ AF-27V-➁ ontact Operations (for all selectors) ontacts Operator Position and ontact Operation 2-pos. () -pos. () eft ight eft enter ight ➁ ens/ed olor ode olor ode Amber A Green G ed Blue S Yellow Y White W Voltage/amp ode Voltage ode 5V D ED 1 6V A/D ED 2 12V A/D ED 24V A/D ED 4 120V A ED 8 6V A/D 5 12V A/D 6 24V A/D 7 eft eft eft eft eft As viewed from front of switch. ight ight ight ight ight Oversize ound 90 2-Position 45 -Position left 2-Way spring return 24V ED 24V ED 24V ED 24V ED 24V ED 24V ED HA1F-264-➁ HA1F-267-➁ HA1F-2164-➁ HA1F-2167-➁ HA1F-64-➁ HA1F-67-➁ HA1F-164-➁ HA1F-167-➁ HA1F-264-➁ HA1F-267-➁ HA1F-64-➁ HA1F-67-➁ HA1F-224V-➁ HA1F-227V-➁ HA1F-2124V-➁ HA1F-2127V-➁ HA1F-24V-➁ HA1F-27V-➁ HA1F-124V-➁ HA1F-127V-➁ HA1F-224V-➁ HA1F-227V-➁ HA1F-24V-➁ HA1F-27V-➁ 1. In place of ➁ specify ens/ed olor ode from table above. 2. amps also available in 5V D, 6V A/D or 12 V A/D, change 4 or 7 using voltage/lamp codes (ie A1F-26-➁ uses 12V A/D ED).. All switches listed have contacts. For see sub-assembled on next page. 4. PB terminal models also available with silver contacts (change 1 or 2 to 5 or 6 respectively, ie A1F-224V-➁ becomes A1F-264V-➁ USA: (800) 262-IDE or (408) , anada: (888) 17-IDE

14 Miniature ø16mm - 6 Series Illuminated Selector Switches (Sub-Assembled) ontacts + Safety lever lock + amp Holder + amp + Operator + ens/handle = ompleted Unit Part Numbers: Operators Style Positions Function Part Number ound 2 from A1F-20 A1F ectangular 2 Oversize ound 2 from from left from both from from from left from both from from from left from both from from from left from both A1F-0 A1F-10 A1F-20 A1F-0 F-20 F-210 F-0 F-10 F-20 F-0 AF-20 AF-210 AF-0 AF-10 AF-20 AF-0 HA1F-20 HA1F-210 HA1F-0 HA1F-10 HA1F-20 HA1F-0 Part Numbers: enses/handles Appearance Part Number Standard Oversize A1A-F-➁ HA1A-F-➁ In place of ➁ specify ens olor ode from table. Part Number: Safety ever ock Appearance Part Number HA9Z-S Part Numbers: ontacts Appearance Gold Solder ontacts PB Tab HA-1 HA-2 HA-10V HA-20V Part Number: amp Holder Appearance Part Number HA9Z-AH ➁ ED/ens olor ode olor ode Amber A Green G ed Blue S Yellow Y White W Silver HA-50 HA All assembled selectors on previous pages use contacts. contacts are for use only on two position selectors. HA-50V HA-60V Part Numbers: amps Appearance Voltage Part Numbers ED 5V D 6V A/D 12V A/D 24V A/D 120V A 6V A/D 12V A/D 24V A/D FTD-5➁ FTD-6➁ FTD-1➁ FTD-2➁ FTD-H2➁ H-06 H-14 H-28 In place of ➁ specify ED olor ode from table. USA: (800) 262-IDE or (408) , anada: (888) 17-IDE -4

15 ø16mm - 6 Series Miniature Part Numbers: Pushbutton Selectors ontact Operation Style 2 Position Style Pushbutton Selectors (Assembled) Solder Tab PB 2 Position HA HA1-22V-1 Position HA1-6-1 HA1-2V-1 1. In place of 1 specify Button olor ode. 2. PB terminal models also available with silver contacts (change 1 or 2 to 5 or 6 respectively, ie HA1-22V-1 becomes HA1-26V-1). Operator Position eft enter ight Normal Depressed Normal Depressed Normal Depressed eft ight eft ight eft ight 1 Button olor ode olor ode Black Green ed Blue Yellow eft ight B G S Y Position Blocked eft ight eft ight eft ight eft ight eft ight ever Switch (Assembled) Part Numbers: ever Switches Style Operation ontacts U Terminal Type Solder Tab PB A1T-26 A1T-22V 2-Position -Position ontact Operation Operator Position & ontact Operation ontacts Down enter Up D U top A1T-216 A1T-212V D U eturn from bottom A1T-226 AIT-222V U D A1T-6 A1T-2V D U top A1T-16 A1T-12V D U bottom A1T-26 A1T-22V D U both A1T-6 A1T-2V D PB terminal models also available with silver contacts (change 1 or 2 to 5 or 6 respectively, ie A1T-22V becomes A1T-26V). 2-pos. () from Top eft ight eft ight 2-pos (). eturn from Bottom eft ight eft ight -pos. () All models eft ight eft ight eft ight As viewed from front of switch USA: (800) 262-IDE or (408) , anada: (888) 17-IDE

16 Miniature ø16mm - 6 Series Accessories Part Specifications Part Number Notes ing Wrench Made of metal MT-001 amp Holder Tool (Made of ubber) Made of rubber. Used for removing and replacing ED and incandescent lamps in illuminated units. O-44 ens emoval Tool For Illuminated pushbuttons and pilot lights. MT-101 ED amp amp Switch Guard Dust-proof over 5V D 6V A/D 12V A/D 24V A/D 120V A 6V A/D 12V A/D 24V A/D 90 degrees opening maintained 180 degrees opening, spring return For round units For square units For rectangular units FTD-5➁ FTD-6➁ FTD-1➁ FTD-2➁ FTD-H2➁ H-06 H-14 H-28 Used for tightening the plastic locking ring when installing the 6 series unit on a panel. Tightening torque should not exceed 9kgf cm when tightening a locking ring. ubber tool used for replacing ED and incandescent lamps. Used for removing the lens or button from the housing. T 1-/4 miniature flange base. In place of ➁ specify ED olor ode (see page -4). 0.5W, T 1-/4 miniature flange base ound/ A-K6 Prevents inadvertent switch operation. IP40 dust-tight ectangular A-KH6 rated. ound/ ectangular Oversize ound/sq A-K6SP A-KH6SP HA9Z-K1 A-D6 A-DQ6 A-DH6 Prevents inadvertent switch operation. IP65 oiltight rated. Provides extra level of sealing for front-panel portion of switches. (Not applicable for units with oversize lenses or buttons). Terminal over Made of white nylon All removable contacts Unibody Pilot ights H6-V2 H6-PV overs terminals to prevent possible electric shock. Mounting Hole Plug ubber Aluminum A-B6 A-BM6 Fills unused panel cutouts. Made of nitrile rubber. Push-in installation from front of panel. IP65 (oiltight) rated. Fills unused panel cutouts. Made of aluminum. Screwon locking ring from inside of panel. IP65 (oiltight) rated. eplacement Keys for A1K (#12) for HA1K (#21) AS6-SK KG9Z-SK Pair of keys. eplacement Engraving Inserts ound ectangle Oversize ound Oversize Mushroom A6M-W A6Q-W A6H-W HA9Z-P1-W HA9Z-P2-W HA9Z-P1-W eplacement ocking ing All models HA9Z-N eplacement Anti-otation ing 6 standard 6 oversize A6-P HA9Z-P Prevents rotation of switches in panel. (included with all assembled switches) eplacement Selector Inserts HA9Z-H1-1 Applicable to round oversize selectors only 1 = (G,, S, W, Y) eplacement Safety ever ock HA9Z-S USA: (800) 262-IDE or (408) , anada: (888) 17-IDE -45

17 ø16mm - 6 Series Miniature Dimensions Non -Illuminated Pushbuttons (A*B) 0.11 (2.8) 0.24 (6.0) 0.27 (6.8) 0.5 (9.0) Emergency Stop Switch (HA1B) ø0.8" (21mm) O.61" (15.5mm) + - ø0.70" (17.8mm) OK 1.9 (5.4) 0.8 (9.6) 0.62" (15.8mm) PB Terminal 0.4" (8.7mm) 0.21" (5.4mm) 0.20" (5.2mm) ubber Washer Stopper ocking ing 0.41" (10.5mm) 1.42" (6mm) 0.5" (1.5mm) Panel Thickness 0.02"-0.24" (0.5~6.0mm) 0.4" (11mm) 0.98" (25mm) 0.94 (24.0) Ø 0.98" (24.9mm) 0.98 (24.8) Emergency Stop Switch (HA1E) - Short Body Style Buzzer (AZ) 0.11 (2.8) 0.98 (24.8) 0.24 (6.0) 0.62 (15.7) 0.5 (9.0) 1.9 (5.4) 0.5 (9.0) 0.94 (24.0) Pilot ights (A*P) 0.11 (2.8) 0.24 (6.0) 0.98 (24.8) 0.27 (6.8) 0.5 (9.0) 1.9 (5.4) 0.8 (9.6) 0.94 (24.0) USA: (800) 262-IDE or (408) , anada: (888) 17-IDE

18 Miniature ø16mm - 6 Series Dimensions con t Illuminated Pushbuttons (A*) 0.11 (2.8) 0.24 (6.0) 0.27 (6.8) Key Switches (A*K) 0.27 (6.8) 0.5 (9.0) 0.11 (2.8) 0.24 (6.0) 0.5 (9.0) 1.9 (5.4) 0.8 (9.6) 1.9 (5.4).98 (24.9) 0.94 (24.0) 0.94 (24.0) 0.98 (24.8) 0.98 (24.8) Selector Switches (A*S) 0.11 (2.8) 0.24 (6.0) 0.98 (24.8) 0.27 (6.8) 0.5 (9.0) (5.4) (16.8) 0.94 (24.0) Panel ut-out PB ayout (except for Buzzer and E-Stop) PB Pins 0.20 (5.0) Acess Hole for ocking ever 0.6 (9.) Ø0.05 (1.2) 0.24 (6.0) 0.42 (10.7) 0.0 (0.8) 0.20 (5.0) 0.27 (6.8) 0.25 (6.4) 0.06 (1.5) 0.04 (1.0) 0.20 (5.0) 0.94 (24.0) HA1B E-Stop PB Mounting Pattern 0.21" (5.mm) 0.21" (5.mm) 0.21" (5.4mm) 0.4" (8.7mm) Ø 0.05" (1.2mm) USA: (800) 262-IDE or (408) , anada: (888) 17-IDE -47

19 ø16mm - 6 Series Miniature Dimensions con t Oversize Flush Pushbutton and Pilot ights X2 X [25.9] X2 Oversize Extended Non-Illuminated Pushbutton 0.4 [11.0] 0.94 [24.0] 0.59 [15.1] Oversize Unibody PIlot ights 1.48 [7.5] Mushroom Pushbuttons 0.79 [20.0] ÿ1.18 [0.0] [ÿ0.0] Oversize Selector Switch 0.94 ÿ0.94 [2.8] [ÿ2.8] 0.77 [19.5] USA: (800) 262-IDE or (408) , anada: (888) 17-IDE

20 Miniature ø16mm - 6 Series Dimensions con t Oversize Key Switch ever Switch Terminal onfigurations 1.54 [9.0] 0.94 [2.8] Non Illuminated Pushbutton Pilot ights Illuminated Pushbuttons Buzzer amp Terminal (+) amp Terminal ( ) X2 X2 X1 amp Terminal (+) amp Terminal ( ) X2 X2 X1 Input Terminal (X2) X2 X2 Steady Slow Quick X1 X1 Input Terminal (X1) Buzzer Sound Switch A-KH6SP A-K6SP.9 (2.5).51 (1).41 (10.5).94 (24.) 1.79 (45.5) 1.0 () 1.4 (4) 22 Panel Thickness:.20 max. (5 max).9 (2.5).51 (1).41 (10.5).71 (18) 1.79 (45.5).98 (25) A-D6 A-DQ6 A-DH6.75 (19) ø24.94" 1.18 (0).94 (24).94 (24).51.0 (1) (7.5).51.0 (1) (7.5).51 (1).01 (0.) Water-proof Gasket.01 (0.) Water-proof Gasket.01 (0.).0 (7.5) Water-proof Gasket USA: (800) 262-IDE or (408) , anada: (888) 17-IDE -49

21 ø16mm - 6 Series Miniature Dimensions con t H6-V2 A-B6 A-BM6 ED amp 1.85 (47).59 (15) TOP Marking Side.16 (4).8 (21).69 (17.6).08 (2).70 (18).65 (16.5) Internal ircuit.24 (6).10 (2.5).70 (17.8) Gasket.47 (12) ocking ing ED hip Protective Diode Zener Diode USA: (800) 262-IDE or (408) , anada: (888) 17-IDE

22 Miniature ø16mm - 6 Series General Instructions Pushbutton Assembly amp Installation amps can be replaced in two ways: 1. If contacts are accessible (or pushbutton not installed in a panel) then it is easiest to first remove the contacts from the operator. This will allow easy access to the lamp/lamp-holder assembly. Grab lamp, depress slightly, and turn counter clockwise. amp can then be removed by pushing it back through the lamp holder. 2. If contacts are not accessible, then the lamp can be replaced by first removing the lens from the operator. Just pull lens straight out either with a fingernail or optional lens removal tool (MT-101). amp/lampholder assembly can then be removed with lamp removal tool (O-44). Insert lamp removal tool through operator, depress slightly, turn counter clockwise, then pull lamp/lamp-holder assembly out. amp can then be removed by pushing it back through the lamp holder. Engraving enses All buttons and lenses can be engraved directly on the outside surface. Illuminated lenses also allow for engraving on a plate that is underneath the colored section of the lens. emove the colored section of the lens by pulling on the edge while simultaneously unhooking it from the latches on the lens holder. The marking plate will then be accessible. It can then be engraved or a thin marked insert (such as mylar or paper) can be sandwiched between the marking plate and colored section of the lens. ecess Engraving Area atches olor ens Marking Plate ens Holder Panel Mounting Before any unit can be mounted into a panel, the contact block must be removed. Slide metal locking lever and pull contact off. oosen and remove the locking ring and square anti-rotation ring from the operator and insert operator through panel cutout from the front of the panel. Slide on anti-rotation ring and tighten locking ring, using locking ring wrench (MT-001). Slide contact block onto operator, observing TOP marking on both parts. Slide metal locking lever in direction indicated by OK. The yellow plastic safety lever lock can then be snapped onto the locking lever; this will prevent vibration or maintenance actions from releasing the contact from the operator. PB Mounting Being able to separate the contacts from the operator allows for assembly of the front panel components (operator and lens) to be performed in tandem with the P board assembly and soldering. For applications where multiple rows of pushbuttons are mounted closely together, or where other components may obstruct access to the contact locking lever, be sure to include access holes in the P board (refer to P board layout dimensions for location). Also be sure to allow for space above and to the side of contact to ensure that no components block the contact block locking lever. P board pins are designed to rest on the PB, take this into consideration to ensure that pins do not short closely spaced traces. USA: (800) 262-IDE or (408) , anada: (888) 17-IDE -51