Circuit Breakers. Switching & Controls. Selection Guide NC1V Series Dimensions...

Transcription

1 Switching & ontrols Selection Guide V Series Dimensions ircuit Breakers Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal Blocks ircuit Breakers Table of ontents LED Lighting - Pg. 1 Automation & Sensing - Pg. 21 Safety - Pg. 281 Switching & ontrols - Pg. 483 Index - Pg. 1039

2 Selection Guide ircuit Breakers Switches & Pilot Lights Selection Guide Series 1V RA RBM Signaling Lights Appearance Relays & Sockets Timers ontactors Page 1029 Visit Actuator Style Lever umber of Poles 1, 2, 3 Lever and Rocker (non-illuminated and illuminated) Lever: 1, 2, 3 Rocker: 1 Protection Method Hydraulic magnetic Electromagnetic trip Internal ircuits Auxiliary ontact Alarm ontact Inertial Delay Series current trip Relay voltage trip Optional 125V A 3A (resistive load), 30V D 2A (resistive load) Optional 125V A 3A (resistive load). 30V D 2A (resistive load) Optional (for resistance to high inrush currents) Series current trip Lever 1, 2, 3 Optional (250V A, 5A; 50V D, 1A) Optional (250V A, 5A; 50V D, 1A) Optional (250V A, 5A; 50V D, 1A) Optional (250V A, 5A; 50V D, 1A) Optional (for resistance to high inrush) Optional (for resistance to high inrush) Time Delay urves 3 types (A or D) 2 types for D; 3 types for A 2 types for D; 3 types for A Rated Voltage Rated Tripping urrents Rated Interruption apacity Approvals 1-pole 2-pole 3-pole 250V A 50/60Hz, 65V D 250V A 50/60Hz, 125V D 250V A, 50/60Hz 0.1A, 0.3A, 0.5A, 1A, 2A, 3A, 5A, 7A, 10A, 15A, 20A, 25A, 30A 0.3A, 0.5A, 0.75A, 1A, 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A 250V A, 50/60Hz, 65V D 1A, 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A, 50A 2,500A 1,000A, 250V A (50/60Hz), 65V D 1,000A, 250V A (50/60Hz), 65V D UL, SA, E, TUV, Lever: UL, SA, VDE Rocker: UL UL, c-ul, VDE Terminal Blocks 1. For dimensions, see end of each section. 2. UL recognized, applicable standard: UL1077, Supplementary Protectors. 3. ot suitable for branch circuit protection. UL Recognized File o. E68029 *E, TUV, and apply to 1V. File o. LR83454 R Series * * * File o. B ircuit Breakers

3 ircuit Breakers 1V Key features: Superior protection for a wide range of devices from sensitive electronic equipment to electrical control circuits. Applications include semiconductor manufacturing equipment, electronic controllers, computers, microprocessors, communications equipment, power supplies, machine tools, motors, and more. Excellent tripping time curve performance Flat retractable lever for safety operations Slim housing design Spring-up terminals allow for use of ring terminals Fingersafe main circuit terminals olor (red/green) contact position indicator DI rail or direct panel mounting (through-panel mounting brackets available) Optional built-in auxiliary / alarm contacts Applicable Standards ertification Mark File umber UL1077 SA 22.2 o. 235 E V ircuit Breakers E68029 LR83454 B European ommission s Low Voltage Directive GB o Electrical Applicance and Material Safety Law Technical Standard Type 1V: Lever style DI rail and panel mountng o. of Poles 1: 1-pole 2: 2-pole 3: 3-pole Series Trip Relay Trip Internal ircuit 1: Series trip (current trip) 5: Relay trip (voltage trip) Jet Part umber Structure 1V F 30A A D24V Auxiliary/Alarm ontacts 00: one 21: With one alarm contact 11: With one auxiliary contact 31: With one auxiliary contact and one alarm contact 12: With two auxiliary contacts 32: With two auxiliary contacts and one alarm contact 13: With three auxiliary contacts Inertial Delay Blank: Without F: With * Inertial delay is for A voltage only. * Available with medium and slow trip curves (not applicable with relay trip). Voltage Trip oil Voltage D24V: 24-48V D *Specified for relay trip only. Time Delay urve M: Slow A: Medium S: Instantaneous *Specified for series trip only. Rated urrent 0.1A, 0.3A, 0.5A, 1A, 2A, 3A, 5A, 7A, 10A 15A, 20A, 25A, 30A *Specified for series trip only. Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal Blocks ircuit Breakers IDE (4332) USA & anada 1029

4 1V ircuit Breakers ontactors Timers Relays & Sockets Signaling Lights Switches & Pilot Lights Internal ircuit Protection Method Specifications Series trip (current trip), Relay trip (voltage trip) Hydraulic magnetic tripping system, Magnetic tripping system (voltage trip) o. of Poles 1-pole 2-pole 3-pole Rated Voltage (A/D) 1 250V A 50/60Hz, 65V D 250V A 50/60Hz, 125V D 250V A, 50/60Hz Series Trip (urrent Trip) Relay Trip (Voltage Trip) 3 Auxiliary ontact/alarm ontact Insulation Resistance Dielectric Strength Vibration Resistance (with rated current applied) Rated Short-circuit apacity Rated urrent Operation haracteristics 2 Rated urrent Trip Voltage ontact Rating Shock Resistance (S time delay curve: 80% rated current, A, M time delay curve: 100% rated current) Electrical Life Minimum Applicable Load 250V A, 2500A 65V D, 2500A 250V A, 2500A 125V D, 2500A 0.1A, 0.3A, 0.5A, 1A, 2A, 3A, 5A, 7A, 10A, 15A, 20A, 25A, 30A Time delay curve curve M (slow), curve A (medium), S (instantaneous) Only curves M and A are also available with inertial delay option. 30A Reference Temperature 40 Operating Temperature Operating Humidity Terminal Style Weight (approx.) 250V A, 2500A 24 to 48V D (at 25 ) Voltage application duration 10 sec maximum, tripping time 0.1 sec maximum (at rated voltage) 125V A 3A (resistive load), 30V D 2A (resistive load) 24V D 1mA (resistive load, reference value) 100MΩ minimum (500V D megger) 2,000V A, 1 minute (between terminals when main contacts are open, between live parts of different poles, between live and dead parts) 600V A (between terminals when auxiliary circuits are open) Damage limits: Operating extremes: Damage limits: Operating extremes: 147 m/s 2 (10 to 55 Hz) (1-pole, 2-pole), 78 m/s 2 (3-pole) 98 m/s 2 (1-pole, 2-pole), 78 m/s 2 (3-pole) 490 m/s 2 (1-pole, 2-pole), 297 m/s 2 (3-pole) 196 m/s 2 (S, A, M curves) 10,000 cyles minimum (at rated curent), 10 operations per minute 10 to +60 (no freezing) Rated current is based on an ambient temperature of 40. When the operating temperature exceeds 40, derate the rated current by using the factors shown below. 45 ~ 85% RH (no condensation) Main ircuit Terminal Spring-up, fingersafe terminal: M4 screw (up to 20A), M5 screw (25A and 30A) Auxiliary/Alarm ontacts, Voltage oil Terminal M3.5 screw 1-pole: 90g, 2-pole: 170g, 3-pole: 260g 1 3-pole model is for A voltage only. 2 For S (instantaneous) tripping curve, a humming sound may occur when used in an A sinusoidal-wave current circuit around 80% of the rated current, however, the performance of the circuit breaker will not be affected. To avoid unnecessary tripping, do not use in circuits where inrush currents may be present. 3 Relay trip (voltage trip) type is not equipped with an overcurrent trip function. Do not use the 1V circuit breakers in environments where they are exposed to extreme temperature, humidity, dust, corrosive gases, vibration, shock, or in a circuit where inrush current may be present, otherwise unnecessary operation and damage may occur. Terminal Blocks Operating Temp. Derating Factor ircuit Breakers

5 ircuit Breakers 1V Models Specify rated current, time delay curve, or voltage trip coil voltage in place of when ordering. Internal ircuit Series Trip (urrent Trip) Relay Trip (Voltage Trip) o. of Poles 1-pole 2-pole 3-pole 1-pole Inertial Delay With With With Auxiliary ontact Alarm ontact Part o 1V One Auxiliary ontact 1V One Alarm ontact 1V V-1100F- 6 7 One Auxiliary ontact 1V-1111F- 6 7 One Alarm ontact 1V-1121F V One Auxiliary ontact 1V Two Auxiliary ontacts 1V One Alarm ontact 1V One Auxiliary ontact and One Alarm ontact 1V V-2100F- 6 7 One Auxiliary ontact 1V-2111F- 6 7 Two Auxiliary ontacts 1V-2112F- 6 7 One Alarm ontact 1V-2121F- 6 7 One Auxiliary ontact and One Alarm ontact 1V-2131F V One Auxiliary ontact 1V Two Auxiliary ontacts 1V Three Auxiliary ontacts 1V One Alarm ontact 1V One Auxiliary ontact and One Alarm ontact Two Auxiliary ontacts and One Alarm ontact 1V V V-3100F- 6 7 One Auxiliary ontact 1V-3111F- 6 7 Two Auxiliary ontacts 1V-3112F- 6 7 Three Auxiliary ontacts 1V-3113F- 6 7 One Alarm ontact 1V-3121F- 6 7 One Auxiliary ontact and One Alarm ontact Two Auxiliary ontacts and One Alarm ontact 1V-3131F V-3132F V pole 1V pole 1V A 0.3A 0.5A 1A 2A 3A 5A 7A 10A 15A 20A 25A 30A 6 Rated urrent ode 7 Time Delay urve M (slow) A (medium) S (instantaneous) 8 Voltage Trip oil Voltage D24V Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal Blocks ircuit Breakers IDE (4332) USA & anada 1031

6 1V ircuit Breakers Switches & Pilot Lights 1-pole 1V-1100 (Without auxiliary/alarm contacts) 1V-1111 (With auxiliary contact) Internal ircuits One auxiliary contact. 1V-1121 (With alarm contact) One alarm contact. 1V-1500 (Relay Trip) A B Signaling Lights 2-pole O O D 1V-2100 (Without auxiliary/alarm contacts) 1V-2111 (With auxiliary contact) 1V-2121 (With alarm contact) 1V-2500 (Relay Trip) Relays & Sockets One auxiliary contact. Also available with two auxiliary contacts One alarm contact. Also available with one auxiliary contact and one alarm contact. A B A B D D Timers 3-pole 1V-3100 (Without auxiliary/alarm contacts) 1V-3111 (With auxiliary contact) O 1V-3121 (With alarm contact) O 1V-3500 (Relay Trip) A A A ontactors Terminal Blocks ircuit Breakers One auxiliary contact. also available with two or three auxiliary contacts. O One alarm contact. Also available with one auxiliary and one alarm contact, and two auxiliary and one alarm contact. O Overcurrent-Time Delay haracteristics 40 deg ) [vertical mounting] Percent of Rated urrent Item Time Delay urve 100% 125% 150% 175% 200% 400% 600% 800% 1000% A (50/60Hz)/D A (50/60Hz) *: MAY TRIP on D S (instantaneous) O TRIP *0.005 to to to to 0.03 A (medium) O TRIP *25 to to to to 4 M (slow) O TRIP *60 to to to to 10 With Inertial Delay A (medium) With Inertial Delay M (slow) O TRIP 25 to to to 6 O TRIP 60 to to to 10 B D to to to to to 4.5 B D to to to to to 3 B D to to to 0.8 to 1.0 to

7 ircuit Breakers 1V Time in sec Time in sec Time in sec D (ote) A urrent (percent load of the rated current) Time Delay urves at 40 urve A (medium) A D (ote) urrent (percent load of the rated current) urve S (instantaneous) urrent (percent load of the rated current) ote: Inertial Delay option not available with S (instantaneous) curve. urve A (medium) With Inertial Delay Time in sec D (ote) A urrent (percent load of the rated current) urve M (slow) ote: The entire shaded area applies to A. For D, the shaded area on the right of the dashed line applies Time in sec urrent (percent load of the rated current) urve M (slow) With Inertial Delay Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal Blocks ircuit Breakers IDE (4332) USA & anada 1033

8 1V ircuit Breakers ircuit Breakers Terminal Blocks ontactors Timers Relays & Sockets Signaling Lights Switches & Pilot Lights Time Delay urve and Ambient Temperature 1V circuit breakers employ a hydraulic magnetic tripping system, where the rated current (trip current) is not affected by ambient temperatures. But the time delay may vary with the oil viscosity in the oil dash pot. Lower oil viscosity at higher temperatures results in a shorter delay, whereas at lower temperatures the delay will be longer. Temperature orrection urve The time delay curves on the preceding page are measured at 40. With reference to the following curves, time delays can be corrected according to ambient temperature. hange of Time Delay (%) Ambient Temperature ( ) The time delay is based on an ambient temperature of 40. Time delays at other temperatures are corrected according to the temperature correction curve. The time delay of the instantaneous time delay curve (S) is not affected by ambient temperature. When operating temperature exceeds 40, derate the rated current by multiplying the derating factor shown on the right. Impedance and oil Resistance Series Trip (urrent Trip) at 25 Rated urrent For A 50/60 Hz Impedance (Ω) 50 Operating Temp Derating Factor For D Resistance (Ω) urve S urves A, M urve S urves A, M 0.1A A A Tolerance: 1A A A A A A A A A A ±25% (up to 20A), ±50% (25A and 30A) Relay Trip (Voltage Trip) at 25 Tripping Voltage 24-48V Tolerance: ±25% Inertial Delay For D Resistance (Ω) Inertial delay is designed not to trip on a non-repeating single pulse of 20 times the rated current (peak value) for a duration of 8ms. In addition, circuit breakers equipped with inertial delay do not respond to high inrush currents caused by transformer or lamp loads, but perform the specified interruption on subsequent overcurrents. Inertial delay is not available with the series trip curve S (instantaneous). Percent of Rated urrent (%) Percent of rated current Pulse peak current 100 Protector rated current 2. Sinusoidal or parabolic pulse Pulse width (Duration) Pulse Width (ms) Pulse peak current Voltage Drop Due to oil Resistance or Impedance The internal resistance or impedance of a circuit breaker tends to be larger for a smaller rated current. Therefore, when circuit breakers with a small rated current are used, voltage drop should be taken into consideration. Internal resistance also varies with time delay curves, which should also be considered during installation

9 ircuit Breakers 1V 1-pole 1V V-1111 (Auxiliary ontact) 2-pole 1V-1121 (Alarm ontact) 1V-1500 (Relay Trip) 1V-2100 Dimensions (mm) M4 Terminal Screw 12.0 (up to 20A) M5 Terminal Screw (25A or more) M4 Terminal Screw (up to 20A) M5 Terminal Screw (25A or more) M3.5 Terminal Screw Terminal over M3.5 Terminal Screw 17.5 Terminal over M5 Terminal Screw (30A) M4 Terminal Srew (up to 20A) M5 Terminal Screw (25A or more) Mounting Hole Layout (M4 Mounting Screws) 2-M4 12 Mounting Hole Layout (M4 Mounting Screws) 2-M Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal Blocks ircuit Breakers IDE (4332) USA & anada 1035

10 1V ircuit Breakers Switches & Pilot Lights 2-pole 1V-2111 (one auxiliary contact) 1V-2112 (two auxiliary contacts) 29.5 M4 Terminal Srew (up to 20A) M5 Terminal Screw (25A or more) Signaling Lights 1V-2121 (one alarm contact) 1V-2131 (one auxiliary contact and one alarm contact) 3 Dimensions shown are for 1V-2111 and 1V Mounting Hole Layout (M4 Mounting Screws) M5 Terminal Screws (30A) M4 Relays & Sockets 1V-2500 (Relay Trip) M3.5 Terminal Screw Terminal over 3-pole Timers 47.0 M4 Terminal Screw (up to 20A) M5 Terminal Srew (25A or more) V ontactors 52.5 Mounting Hole Layout (M4 Mounting Screws) V-3111 (one auxiliary contact) 1V-3112 (two auxiliary contacts) 47.0 M4 Terminal Screw (up to 20A) M5 Terminal Srew (25A or more) M4 Terminal Blocks 1V-3113 (three auxiliary contacts) 1V-3121 (one alarm ontact) 48.4 ircuit Breakers 1V-3131 (one auxiliary contact and one alarm contact) 1V-3132 (two auxiliary contacts and one alarm contact) 52.5 M3.5 Terminal Srew Dimensions shown are for 1V-3111 and 1V Terminal over

11 ircuit Breakers 1V 3-pole 1V-3500 (Relay Trip) M5 Terminal Screw (30A) M3.5 Terminal Screw Terminal over 66.0 Instructions Installation Angle Applicable wire and rimp Terminals Tripping method is hydraulic magnetic. Minimum operating current varies with installation angle. Operating currents are influenced by the weight of the movable iron core. With reference to the following figures, correct the rated current. Terminal Terminal Screw 100% 120% 90% 100% Minimum operating current is calculated from the following formula: (Minimum operating current) = (Rated current) (orrection factor by installation angle) (Reference minimum tripping current rate) DI Rails Installation on DI Rail 1. Fasten the DI rail securely. 2. With the latch facing downward, install the 1V circuit breaker on the DI rail as shown below. Removal from DI Rail Using a flat screwdriver, pull the latch on the circuit breaker to remove from the DI rail. Installing Push 35mm-wide DI Rail Removing Flat Screwdriver Latch 35mm-wide DI Rail Panel Mounting Screws (not supplied) Screw Type Tightening Torque Shape M4 0.8 to 1.0 m Spring Washer Plain Washer Main ircuit Terminals Auxiliary ontact Alarm ontact Voltage oil Terminals Spring-up, fingersafe, slotted Phillips screw with square washer (up to 20A) Spring-up fingersafe terminal (25A and 30A) Slotted Phillips screw with square washer Mounting Hole Layout (M4 Mounting Screws) 2-M4 onnectable Wire Size (mm 2 ) 47.0 Applicable rimping Terminal Tightening Torque ( m) 0.25 to 1.65 R to to 2.63 R to 6.64 R to 1.65 R to to 2.63 R to 6.64 R to 1.65 R to to 2.63 R2-3.5 For wiring the main circuit terminal, use applicable crimp terminals and tighten to the recommended torque. When using the a 1V circuit breaker as a SA-certified product, use with SA-certified crimp terminals. When using the 1V circuit breaker as UL-recognized product, use with UL-recognized crimp terminals. Product Markings (Example: 1V AA) Part o. Rated Voltage Rated urrent P E S 220VA J E T 30A IRUIT PROTETOR 1V-1111 Ue 250VA 50/60Hz 65VD In 30A Suppl. Prot. I..2500A POLE 1 URVE A AUX. SW 125VA 3A 30 VD 2A A.T. 40 JAPA PSE ertification o. of Poles Time Delay urve Auxiliary/Alarm ontact Ratin Reference Operating Temperature ertification Marks Installation of Auxiliary/Alarm Terminal over After wiring the terminals, install the terminal cover by aligning with the circuit breaker as shown below. Terminal cover installed Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal Blocks ircuit Breakers IDE (4332) USA & anada 1037

12 1V ircuit Breakers Switches & Pilot Lights Accessories Appearance Part o. Description Appearance Part o. Description 9Z-MA11 Panel ut-out Mounting bracket for 1-pole model 9Z-PW1 Marking Plate Holder* Signaling Lights 9Z-MA21 Panel ut-out Mounting bracket for 2-pole model 9Z-LK1 Padlock attachment** Relays & Sockets 9Z-MA31 Panel ut-out Mounting bracket for 3-pole model 1V-AUX-V Replacement Auxiliary/ Alarm Terminal over (ylon - PA66) *Marking plate not supplied. ** Padlock not supplied. Timers 9Z-TA1 Replacement Wiring lip when using panel mount brackets ircuit Breakers Terminal Blocks ontactors