Relays & Sockets. RQ Series PCB Relays

Transcription

1 RQ RQ Series PCB Relays IDEC RQ relays are low-profile, PCB relays in a compact package. Size equals value. RQ relays are small, yet maintain high contact ratings and long operational life. For larger power needs, a A model is also available. Key features: Low profile: x.7 x mm Contact rating: A () and A () High capacity model with A () contact rating Operational life: 0K cycles at full resistive load million cycles, no load LED/Diode Plug-in modules available with DIN rail socket UL Recognized File No. E0 R Part Number Selection Part Number Contact Model Pin Terminal Coil Code A A A Basic RQV-CM-0 A, A, A30, D, D HIgh Capacity (HC) RQV-CH-0 A, A, A30, D, D, D Basic RQV-CN-0 A, A, A30, D, D, D Coil Table Coil Code A A A30 D D D Coil Rating V AC -0V AC 0-0V AC V DC V DC V DC Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RQV-CM A Part No. Coil Code 00--IDEC (33) USA & Canada 7

2 RQ Sockets Relays Finger-safe DIN Rail Mount PCB Mount RQ SQV-07B SQV-3* RQ RQ HC SQV-07B SQV-3* Replacement Parts & Accessories Part Number Description Part Number Description SQZ-C Replacement retaining clip SQZ-LD Diode plug in modules for DIN socket SQZ-C3 Replacement hold-down spring for SQ PCB sockets SQZ-LR RC plug-in module (-30V AC) for DIN socket SQZ-J pt jumper for DIN socket SQZ-P Replacement marking plate. *Comes with hold down spring. Comes with retaining clip and marking plate. Accessories Item Appearance Use with Part No. Remarks Aluminum DIN Rail ( meter length) DIN Rail End Stop All DIN rail sockets BNDN00 DIN rail BNL. mm wide. IDEC offers a low-profile DIN rail (BNDN00). The BNDN00 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN00 measures 0.3 (.mm) in height and.37 (3mm) in width (DIN standard). Standard length is 3 (,000mm). Specifications Model (Contact) RQ RQ HC RQ No. of poles Contact Configuration Contact Rating A A A Contact Material Silver-Nickel alloy Contact Resistance Operating Time Release Time Dielectric Strength Vibration Resistance Shock Resistance Mechanical Life Electrical Full Rated Load Operating Temperature Operating Humidity Between contact & coil Between contacts Damage limits Operating extremes Damage limits Operating extremes 0mΩ max ms ms,000vac, minute,000vac, minute - Hz, amplitude.mm - Hz, amplitude.mm 0m/s min (G),000m/s min (0G),000,000 operations 0,000 operations -0 to º C to % Dimensions (H x W x D mm) x.7 x Weight (Approx.) g 770

3 RQ Coil Ratings Rated DC AC Nominal Current Coil Power Consumption 0HZ 0HZ Resistance 0HZ 0HZ V 33.3mA 30Ω V.7mA,0Ω V.mA,30Ω V.7mA.3mA 30Ω 0.7W 0.W V 7.mA.3mA,0Ω 0.W 0.73W 30V 3.mA.7mA 3,00Ω 0.7W 0.3W Socket Specifications DIN Rail Sockets PCB Mount Socket Electrical Life Curves Pickup Dropout Max Allowable 0.0W 0% Max % Min 30% 0% Max 30% Min 30% Relays Terminal Electrical Rating Wire Size Torque SQV-07B M3 screw with box clamp 300V, A Maximum up to - # AWG.0N m Maximum SQV-07B M3 screw with box clamp 300V, A Maximum up to - # AWG.0N m Maximum SQV-3 PCB mount 300V, A SQV-3 PCB mount 300V, A Maximum Switching Capacity RQ & RQ High Capacity RQ RQ, RQ High Capacity & RQ Operations 7 0 RQ Internal Connection (View from Bottom) RQ-HC Operations 7 0 RQ RQ RQ HC NC C NO NC NC C C NO NO NC C NO (V) load of RQ RQ RQ-HC IDEC (33) USA & Canada 77

4 RQ RQ Dimensions (mm) RQ/RQ HC SQ Socket Domensions SQV-07B SQV-07B A A A A (TOP VIEW) (TOP VIEW) SQV-3 PCB Pin Layout SQV-3 SQV-3 PCB Pin Layout SQV

5 Key features through PDT, A contacts Compact power type relays Miniature power relays with a large capacity A contact capacity Compact size saves space Contact PDT Series Compact Power Relays Model Part Number Selection Blade Terminal Part Number PCB Terminal Standard B-U 0 V-U 0 With Indicator B-UL 0 With Check Button B-UC 0 With Indicator and Check Button B-ULC 0 Top Bracket Mounting B-UT 0 Coil Code (Standard Stock in bold) ACV, ACV, ACV, ACV, AC0V, AC0V, AC0V DCV, DCV, DCV, DCV, DCV With Diode (DC coil only) B-UD 0 V-UD 0 DCV, DCV, DCV, DCV, DCV With Indicator and Diode (DC coil only) B-ULD 0 DCV, DCV, DCV, DCV Standard B-U 0 V-U 0 With Indicator B-UL 0 V-UL 0 With Check Button B-UC 0 With Indicator and Check Button B-ULC 0 Top Bracket Mounting B-UT 0 ACV, ACV, ACV, AC-0V, AC0-0V DCV, DCV, DCV, DCV, DC0-V With Diode (DC coil only) B-UD 0 V-UD 0 DCV, DCV, DCV, DCV, DC0-V With Indicator and Diode (DC coil only) B-ULD 0 V-ULD 0 Standard 3B-U 0 3V-U 0 With Indicator 3B-UL 0 3V-UL 0 With Check Button 3B-UC 0 With Indicator and Check Button 3B-ULC 0 Top Bracket Mounting 3B-UT 0 With Diode (DC coil only) 3B-UD 0 With Indicator and Diode (DC coil only) 3B-ULD 0 Standard B-U 0 V-U 0 With Indicator B-UL 0 V-UL 0 With Check Button B-UC 0 With Indicator and Check Button B-ULC 0 Top Bracket Mounting B-UT 0 ACV, ACV, ACV, ACV, AC0V, AC0V, AC0V DCV, DCV, DCV, DCV, DCV DCV, DCV, DCV, DCV, DCV ACV, ACV, ACV, ACV, AC0V, AC0V, AC0V DCV, DCV, DCV, DCV, DCV With Diode (DC coil only) B-UD 0 V-UD 0 DCV, DCV, DCV, DCV, DCV With Indicator and Diode (DC coil only) B-ULD 0 PCB terminal relays are designed to mount directly to a circuit board without any socket. Ordering Information When ordering, specify the Part No. and coil voltage code: (example) 3B-U AC0V Part No. Coil Code 00--IDEC (33) USA & Canada 773

6 Sockets (for Blade Terminal Models) Relays Standard DIN Rail Mount Finger-safe DIN Rail Mount Through Panel Mount PCB Mount B SHB-0 SHB-OC SHB- SHB- B SHB-0 SHB-0C SHB- SHB- 3B SH3B-0 SH3B-0C SH3B- SH3B- B SHB-0 SHB-0C SHB- SHB- Hold Down Springs & Clips Appearance Item Relay Pullover Wire Spring For DIN Mount Socket B SYS-0F B SYS-0F 3B SH3B-0F B SHB-0F For Through Panel & PCB Mount Socket SYS-F Leaf Spring (side latch) B, B, 3B, B SFA-0 3 SFA DIN Rail mount socket comes with two horseshoe clips. Do not use unless you plan to insert pullover wire spring. Replacement horseshoe clip part number is Y Must use horseshoe clip when mounting in DIN mount socket. Replacement horseshoe clip part number is Y Two required per relay. Leaf Spring (top latch) B, B, 3B, B SFA- 3 SFA-30 3 AC Coil Ratings (V) Rated Current (ma) ±% at 0 C AC 0Hz AC 0Hz Coil Resistance (Ω) ±% at 0 C PDT PDT PDT ,00, ,00 7, ,00 7, , ,0,0 Operation Characteristics (against rated values at 0ºC) Max. Continuous Applied % Pickup 0% maximum Dropout 30% minimum DC Coil Ratings (V) Rated Current (ma) ±% at 0 C Coil Resistance (Ω) ±% at 0 C PDT PDT Max. Continuous Applied Operation Characteristics (against rated values at 0ºC) Pickup Dropout ,0,00,00, ,0. 3,00,00 7,30 % 0% maximum % minimum Standard coil voltages are in BOLD. 77

7 Contact Ratings Model PDT Continuous Current A Maximum Contact Capacity Allowable Contact Power Resistive Load 0VA 300W Inductive Load 0VA W (V) Rated Load Res. Load Ind. Load AC A 7A 0 AC 7A.A 30 DC A 7A AC A 7.A A 0VA 0VA 300W W 0 AC 7.A A 30 DC A 7.A Note: Inductive load for the rated load cos ø = 0.3, L/R = 7 ms TÜV Ratings 3 0V AC A A 7.A 7.A 30V DC A A A A AC: cos ø =.0, DC: L/R = 0 ms UL Ratings Resistive General Use Horsepower Rating 3 3 0V AC A 7.A 7.A 7A.A A /3 HP /3 HP 0V AC A A 7.A 7.A / HP / HP 30V DC A A 7A V DC A CSA Ratings Horsepower Resistive General Use Rating 3 3,, 3 0V AC A A 7.A 7A 7A 7A A /3 HP 0V AC A A A A 7.A 7.A 7.A / HP 30V DC A A A A 7A 7.A Socket Specifications Sockets Terminal Electrical Rating Wire Size Torque DIN Rail Mount Sockets Finger-safe DIN Rail Mount Through Panel Mount Socket PCB Mount Socket SHB-0 SHB-0 SH3B-0 SHB-0 SHB-0C (Coil) M3 screws (contact) M3. screws with captive wire clamp 0V, A Maximum up to #AWG 3. - in lbs -. in lbs M3. screws with captive wire clamp 300V, A Maximum up to #AWG -. in lbs (coil) M3 screws (contact) M3. screws with captive wire clamp, fingersafe 0V, A Maximum up to #AWG. - in lbs -. in lbs SHB-0C SH3B-0C SHB-0C M3. screws with captive wire clamp, fingersafe 300V, A Maximum up to #AWG -. in lbs SHB- SHB- SH3B- Solder 300V, A SHB- SHB- PCB mount 0V, A SHB- SH3B- PCB mount 300V, A SHB- Accessories Item Appearance Use with Part No. Remarks Aluminum DIN Rail ( meter length) DIN Rail End Stop Replacement Hold-Down Spring Anchor All DIN rail sockets BNDN00 DIN rail BNL. mm wide. DIN mount sockets and hold down springs. Y77-0 The BNDN00 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN00 measures 0.3 (.mm) in height and.37 (3mm) in width (DIN standard). Standard length is 3 (,000mm). For use on DIN rail mount socket when using pullover wire hold down spring. pieces included with each socket. 00--IDEC (33) USA & Canada 77

8 Specifications Contact Material Silver cadmium oxide Contact Resistance 0mΩ maximum Minimum Applicable Load V DC, 30 ma; V DC, 0 ma (reference value) 0ms maximum Operating Time PDT ms maximum 0ms maximum Release Time PDT ms maximum AC:.VA (0Hz), VA (0Hz) DC: 0.W Power Consumption AC:.VA (0Hz),.VA (0Hz) DC: 0.W (approx.) AC: VA (0Hz),.7VA (0Hz) DC:.W PDT AC:.VA (0Hz), VA (0Hz) DC:.W Insulation Resistance 0MΩ minimum (00V DC megger) Between live and dead parts:,000v AC, minute Between contact and coil:,000v AC, minute Between contacts of the same pole:,000v AC, minute Dielectric Strength 3 Between live and dead parts:,000v AC, minute Between contact and coil:,000v AC, minute Between contacts of different poles:,000v AC, minute PDT Between contacts of the same pole:,000v AC, minute Operating Frequency Electrical:,00 operations/hour maximum Mechanical:,000 operations/hour maximum Vibration Resistance Damage limits: to Hz, amplitude 0. mm Operating extremes: to Hz, amplitude 0. mm Damage limits:,000m/s (0G) Shock Resistance Operating extremes: 00m/s (0G -, ) 0m/s (G -, PDT) Mechanical Life 0,000,000 operations minimum 00,000 operations minimum (0V AC, A) Electrical Life 00,000 operations minimum (0V AC, A) PDT Operating Temperature Operating Humidity Weight (approx.) PDT to +70 C (no freezing) to % (no condensation) : g, : 37g, : 0g, PDT: 7g Note: Above values are initial values.. Measured using V DC, A voltage drop method. Measured at the rated voltage (at 0 C), excluding contact bouncing Release time of relays with diode: 0 ms maximum 3. Relays with indicator or diode: 00V AC, minute. For use under different temperature conditions, refer to Continuous Load Current vs. Operating Temperature Curve. The operating temperature range of relays with indicator or diode is to +0 C. 77

9 Continuous Load Current vs. Operating Temperature Curve (Basic Type, With Check Button, and Top Bracket Mounting Type) () Operating Temperature ( C) Note: The rated voltage is applied to the coil. AC Coil DC Coil 3 7 () Operating Temperature ( C) Note: The rated voltage is applied to the coil. DC Coil AC Coil 3 7 (3/) Operating Temperature ( C) Note: The rated voltage is applied to the coil. AC/DC Coil 3 7 Internal Connection (View from Bottom) Basic Type PDT With Check Button ( ) ( + ) Front Pushbutton Contacts can be operated by pressing the check button. With Indicator (-L type) PDT Below 0V AC/DC 0V AC/DC and over 3 ( ) ( + ) 3 ( ) ( + ) 3( ) ( + ) 3 ( ) ( + ) 3 7 3( ) ( + ) ( ) ( + ) Below V AC/ DC V AC/ DC and over 3( ) ( + ) 3( ) ( + ) When the relay is energized, the indicator goes on. Relay coils less than 0V DC do not contain a protection diode (except ). Relay coils below 0V use LED indicator, coils above 0V use neon lamp indicator. LED color of model is green With Diode (-D type) PDT ( ) ( + ) 3 ( ) ( + ) 3 ( ) ( + ) 3 ( ) ( + ) Contains a diode to absorb the back emf generated when the coil is de-energized. The release time is slightly longer. Available for DC coil only. Diode Characteristics Reverse withstand voltage:,000v Forward current: A 77