Switches & Pilot Devices

Transcription

1 ø16mm - 6 Series 6 Series Miniature Switches and Pilot Devices Key features of the 5/8 6 Series include: 5/8 (16mm) mounting holes ocking lever removable contact blocks Solder terminal or PB terminal options Available assembled or as sub-components Worldwide approvals Incandescent or ED illumination Snap action contacts ontact Ratings amp Ratings U Recognized File No. E55996 SA ertified File No. R1451 Registration No. R (E-stops) Registration No. J (all other switches) Registration No. R (Pilot ights) onforming to Standards EN , EN , VDE , U508, SA - N0.14 Operating Temperature Operation: 5 to +55 (without freezing), 45 to 85% RH Storage: -0 to +80 (without freezing) Vibration Resistance 5 to 55Hz, 1.0 peak-peak amplitude max Shock Resistance Operating limit: 100 m/sec (approximately 10G) Damage limit: 1000 m/sec (approximately 100G) Mechanical ife pushbuttons,000,000 operations minimum All others: 50,000 operations minimum Degree of Protection IP65 (conforming to IE 6059) Dielectric Strength Insulation Resistance Rated Insulation Voltage Rated Thermal urrent ontact Resistance Rated Operating urrent Minimum Recommended oad (reference value for silver contacts) ontact Form ontact Material Electrical ife (at full load) amp urrent Draw amp ife Switch unit: between live and ground: 500 volt A, 1 minute between terminals of different poles: 500 volt A, 1 minute between terminals of same pole: 1000 volt A, 1 minute Illumination unit: between live part and ground: 500 volt A, 1 minute 100MΩ minimum (using 500V D megger) 50V A/D Gold ontacts (pcb): A Silver ontacts (solder): 5A 50Ω maximum initial value Silver ontacts (Solder Terminals) Gold lad ontacts (PB terminals) 0V 15V 50V 0V 15V A resistive 5A A A inductive - 0.1A A inductive A 1.5A D resistive 0.1A D resistive A 0.4A D inductive 1A 0.A 5V A/D, 1mA Solder Tab /PB Snap Action, Double Throw Solder Tab: Pure Silver /PB: Gold Plated Silver pushbuttons: 100,000 operations minimum (1800 operations / hour) All others: 100,000 operations minimum (100 operations / hour) 5V D ED: 8mA 6V A/D ED: 7mA 6V A/D incandescent: 100 ma 1V A/D ED: 8mA 1V A/D incandescent: 50 ma 4V A/D ED: 8mA 4V A/D incandescent: 5 ma 10V A = 8mA Incandescent: 000 hours./ed 50,000 hours. (on pure D, half-life intensity) Switches & Pilot ights Display ights Relays & Sockets Timers Terminal Blocks ircuit Breakers

2 ø16mm - 6 Series Switches & Pilot Devices Switches & Pilot ights Display ights Built-in ED amp Ratings Model FTD-5k FTD-1k FTD-k FTD-Hk amp Base SX6S/8x5.4 Rated Voltage 5V D 1V A/D 4V A/D 10V A Operating Voltage 5V D ±5% 1V A/D ±10% 4V A/D ±10% 10V A ±5% urrent Draw A 9mA 9mA 8mA D 8mA 8mA 8mA olor ode k Specify a color code in place of k in the Part No: A (amber), G (green), R (red), S (blue), W (white), Y (yellow) amp Base olor Same as illumination color Voltage Marking Stamped on the lamp base ife (reference value) Approx. 50,000 hours A, R, W, Y A, R, W, Y (+) ( ) Internal ircuit G, S G, S ED hip Protection Diode Zener Diode (+) ( ) ircuit Breakers Terminal Blocks Timers Relays & Sockets Non-Illuminated Pushbuttons Style Operation ontact Solder Tab PB A1B-M15-j A1B-M11V-j A1B-M16-j A1B-M1V-j A1B-A15-j A1B-A11V-j A1B-A16-j A1B-A1V-j AB-M15-j AB-M11V-j AB-M16-j AB-M1V-j AB-A15-j AB-A11V-j AB-A16-j AB-A1V-j AB-M15-j AB-M11V-j AB-M16-j AB-M1V-j AB-A15-j AB-A11V-j AB-A16-j AB-A1V-j Oversize Flush HA1B-M15-j HA1B-M11V-j HA1B-M16-j HA1B-M1V-j HA1B-A15-j HA1B-A11V-j HA1B-A16-j HA1B-A1V-j Non-Illuminated Pushbuttons (Assembled) Style Operation ontact Solder Tab PB Oversize HA1B-M5-j HA1B-M1V-j Extended HA1B-M6-j HA1B-MV-j HA1B-A5-j HA1B-A1V-j HA1B-A6-j HA1B-AV-j Oversize Flush Oversize Extended Mushroom 1. In place of j specify Button olor ode from table.. Illuminated (translucent) style lenses also available, specify as such: instead of A1B-M15-j use A1B-M15-k in place of k (specify ens olor ode from next page.). PB terminal models also available with silver contacts (change 1 or to 5 or 6 respectively, ie A1B-M11V-j becomes A1B-M15V-j). jbutton olor odes olor ode olor ode Black B Blue S Green G White W Red R Yellow Y HAB-M15-j HAB-M11V-j HAB-M16-j HAB-M1V-j HAB-A15-j HAB-A11V-j HAB-A16-j HAB-A1V-j HAB-M5-j HAB-M1V-j HAB-M6-j HAB-MV-j HAB-A5-j HAB-A1V-j HAB-A6-j HAB-AV-j HA1B-M5-j HA1B-M1V-j HA1B-M6-j HA1B-MV-j HA1B-A5-j HA1B-A1V-j HA1B-A6-j HA1B-AV-j

3 ø16mm - 6 Series Non-Illuminated Pushbuttons (Sub-Assembled) Operators Oversize Oversize Mushroom ontact + Safety ever ock + Operator + Button = omplete Part Style A1-MOA1-AO A-MOA-AO A-MOA-AO HA1B-MOHA1B-AO HAB-MOHAB-AO HA1B-MO HA1B-A0 1. In place of j specify Button olor ode from table on right.. In place of k specify ens olor ode from table on right.. *requires HA1-M0 or HA1-A0 operator instead of HA1B-M0 or HA1B-A0. 4. **requires HA-M0 or HA-A0 instead of HAB-M0 or HAB-A0. Buttons/enses Oversize Flush Oversize Extended Style Button ens Oversize Flush Oversize Extended Mushroom AB6M-BK-jA6M-K-k AB6Q-BK-jA6Q-K-k AB6H-BK-jA6H-K-k HA1A-B1-jHA1A-1-k* HA1A-B-j HAA-B1-j HAA-1-k** HAA-B-j HA1A-B-j HA1A--k ontacts Gold Silver Safety ever ock j Button olor ode olor ode Black B Green G Red R Blue S White W Yellow Y k ens olor ode olor ode Amber A Green G Red R Blue S Yellow Y White W ontacts HA9Z-S Solder PB Tab HA-1 HA- HA-5 HA-6 HA-1V HA-V HA-5V HA-6V Switches & Pilot ights Display ights Relays & Sockets Timers Terminal Blocks ircuit Breakers

4 ø16mm - 6 Series Key features: PB or Solder Terminals ocking ever Removable ontact Blocks Positive Action ontacts 1 or form B (SPST-N) ontacts IP65 Protection 16mm Mounting Hole Tamper Proof onstruction File No. DK SA File No. R1451 HA1B/HA1E Stop Switch U Recognized File No. E55996 Specifications ontact Form 1 or form B (SPST-N) Termination PB or Solder Terminal ontact Material Silver Applicable Standards EN , U508, SA.. No. 14 Rated Insulation Voltage 50V A/D Degree of Protection IP65 onditional Short-ircuit urrent and Short-ircuit Protective Device Positive opening travel Positive Opening Operation Minimum force required to achieve positive opening operation of all break contacts. Maximum travel including travel beyond the minimum travel position Maximum frequency of actuation 50 A (at 50V) 10A 50V Fuse, operation class M according to IE69-1 and IE69-.4mm 10. N ( form B contacts) 5.5mm 1,00 operations/hour Pollution Degree Positive Action Stop Switch Stop Switch Style Operation ontact Pushlock/ Turn Reset Short Body DPST(N) ( form B) SPST-N (1 form B) DPST-N ( form B) 1. Button is non-removable, available in red and as complete assembled unit only.. Stop Switch does not come with safety lever lock. Buzzers (IP40) Buzzer- Style Operating Voltage Direct Opening Action Nameplates HAAV Yellow Plastic ø4mm Marking Blank Accessories: Shroud HAAV-0 Style Applicable Standards Solder Tab PB HA1B-VER HA1E-VS1R HA1E-VSR Solder/ PB Tab 6V A/D ± 10% AZ-1X AZ-1XV 1V to 4 A/D ± 10% AZ-1X4 AZ-1X4V HA1B- VEVR XA9Z-KG1 SEMI S ompliant (Approved by TUV) Buzzer Ratings Frequency khz ± 500 HZ Amplitude 0.1m (at rated voltage) Operating Voltage 6V A/D or 1-4V A/D ± 10% Adjustable ycle 55 to 600 cycles per minute urrent Draw D: 7mA A: 0mA ife 1000 hrs. minimum Insulation Voltage 60V A/D Operating Temperature -0 to 55º (no freezing), 45 to 85% RH Degree of Protection IP40 Switches & Pilot Devices Signaling ights Relays & Sockets Timers ontactors Terminal Blocks ircuit Breakers

5 ø16mm - 6 Series Pilot ights (Assembled) Pilot ights Style Oversize Oversize Oversize Unibody Oversize Unibody Solder Tab PB A1P-10l-k A1P-10lV-k AP-10l-k AP-10lV-k AP-10l-k AP-10lV-k HA1P-10l-k HA1P-10lV-k HAP-10l-k HAP-10lV-k HA1P-1l-k HAP-1l-k kens/ed olor odes olor Amber Green Red Blue White Yellow ode A G R S W lvoltage/amp ode Voltage Y ode 5V D ED 1 6V A/D ED 1V A/D ED 4V A/D ED 4 10V A ED 8 6V A/D Incandescent 5 1V A/D Incandescent 6 4V A/D Incandescent 7 1. In place of k specify ens/ed olor ode from table.. In place of l specify Voltage ode from table.. amps also available in 5VD, 6V A/D, 1V A/D or 10V A, change 4 or 7 using Voltage/amp odes (ie A1P-10-k uses 1V A/D ED). 4. ight independent of switch position. Switches & Pilot ights Display ights Relays & Sockets Timers Terminal Blocks ircuit Breakers

6 ø16mm - 6 Series Switches & Pilot Devices Pilot ights (Sub-Assembled) Switches & Pilot ights Display ights Terminals + Safety ever ock + amp Holder + amp + Operator + ens = ompleted Unit Operators Style A1P-0 AP-0 enses Style A6M-K-k A6Q-K-k amps ED Style Voltage Incandescent 5V D 6V A/D 1V A/D 4V A/D 10 V A 6V A/D 1V A/D 4V A/D FTD-5k FTD-6k FTD-1k FTD-k FTD-Hk H-06 H-14 H-8 Relays & Sockets AP-0 Oversize A6H-K-k In place of k specify ED color code from table below. Terminals Solder Tab PB Oversize HA1A-P1-k HA-00 HA-00V HA1P-0 Not required for unibody operators. Timers Oversize Oversize HAA-P1-k amp Holder HAP-0 In place of k specify lens color code. HA9Z-AH Terminal Blocks Oversize Unibody HA1P-00 Safety ever ock HA9Z-S Oversize Unibody k ens/ed olor odes HAP-00 olor Amber ode A ircuit Breakers Green Red Blue Yellow G R S Y White W

7 ø16mm - 6 Series Illuminated Pushbuttons (Assembled) Illuminated Pushbuttons Style Oversize Oversize Mushroom Operation ontact Solder Tab A1-M15l-k A1-M16l-k A1-A15l-k A1-A16l-k A-M15l-k A-M16l-k A-A15l-k A-A16l-k A-M15l-k A-M16l-k A-A15l-k A-A16l-k HA1-M15l-k HA1-M16l-k HA1-A15l-k HA1-A16l-k HA-M15l-k HA-M16l-k HA-A15l-k HA-A16l-k HA1-M5l-k HA1-M6l-k HA1-A5l-k HA1-A6l-k PB A1-M11lV-k A1-M1lV-k A1-A11lV-k A1-A1lV-k A-M11lV-k A-M1lV-k A-A11lV-k A-A1lV-k A-M11lV-k A-M1lV-k A-A11lV-k A-A1lV-k HA1-M11lV-k HA1-M1lV-k HA1-A11lV-k HA1-A1lV-k HA-M11lV-k HA-M1lV-k HA-A11lV-k HA-A1lV-k HA1-M1lV-k HA1-MlV-k HA1-A1lV-k HA1-AlV-k kens olor odes olor ode Amber A Green G Red R Blue S Yellow Y White W lvoltage/amp ode Voltage ode 5V D ED 1 6V A/D ED 1V A/D ED 4V A/D ED 4 10 V A ED 8 6V A/D Incandescent 5 1V A/D Incandescent 6 4V A/D Incandescent 7 1. In place of k specify ens olor ode from table.. In place of l specify Voltage ode from table.. amps also available in 5V D, 6V A/D, 1V A/D or 10V A, change 4 or 7 using voltage/lamp codes (ie A1P-10-k uses 1V A/D ED). 4. PB terminal models also available with silver contacts change 1 or to 5 or 6 respectively, (ie A1-M114V-j becomes A1-M154V-j). 5. ight independent of switch position. Switches & Pilot ights Display ights Relays & Sockets Timers Terminal Blocks ircuit Breakers

8 ø16mm - 6 Series Switches & Pilot Devices Illuminated Pushbuttons (Sub-Assembled) Switches & Pilot ights Terminals + Safety ever ock + amp Holder + amp + Operator + ens = ompleted Unit Operators enses amps Style Style Style Voltage Display ights A1-MO A1-AO A6M-K-k ED Incandescent 5V D 6V A/D 1V A/D 4V A/D 10 V A FTD-5k FTD-6k FTD-1k FTD-k FTD-Hk A-MO A-AO A6Q-K-k 6V A/D 1V A/D 4V A/D H-06 H-14 H-8 Relays & Sockets A-MO A-AO A6H-K-k ontacts Gold ontacts Solder PB Tab HA-10 HA-0 HA-10V HA-0V Timers Oversize HA1-MO HA1-A0 Oversize HA1A-1-k amp Holder Silver HA-50 HA-60 HA-50V HA-60V Oversize Oversize HA-MO HA-AO HAA-1-k HA9Z-AH Terminal Blocks Mushroom HA1B-MO HA1B-AO Mushroom HA1A--k Safety ever ock HA9Z-S ircuit Breakers k ens/ed olor odes olor ode Amber A Green G Red R Blue S Yellow Y White W In place of k specify lens color code.

9 ø16mm - 6 Series Selector Switches (Assembled) Selector Switches Oversize Style Position ontact 90 -Position 90 -Position 90 -Position 90 -Position -Way spring return -Way spring return -Way spring return -Way spring return Solder Tab PB R A1S-6 A1S-V R A1S-16 A1S-1V R A1S-6 A1S-V R A1S-16 A1S-1V R A1S-6 A1S-V R A1S-6 A1S-V R AS-6 AS-V R AS-16 AS-1V R AS-6 AS-V R AS-16 AS-1V R AS-6 AS-V R AS-6 AS-V R AS-6 AS-V R AS-16 AS-1V R AS-6 AS-V R AS-16 AS-1V R AS-6 AS-V R AS-6 AS-V R HA1S-6 HA1S-V R HA1S-16 HA1S-1V R HA1S-6 HA1S-V R HA1S-16 HA1S-1V R HA1S-6 HA1S-V R HA1S-6 HA1S-V ontact Operations (for all selectors) Operator Position and ontacts ontact Operation -pos. () -pos. () eft Right eft enter Right As viewed from front of switch. eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N 1. All assembled selector switches use contacts.. For contacts see sub-components on next page.. PB terminal models also available with silver contacts change 1 or to 5 or 6 respectively, (ie A1S-1V becomes A1S-16V). Switches & Pilot ights Display ights Relays & Sockets Timers Terminal Blocks ircuit Breakers

10 ø16mm - 6 Series Switches & Pilot Devices Switches & Pilot ights Selector Switches (Sub-Assembled) ontact + Safety ever ock + Operator = omplete Part Operators ontacts Display ights Style Position Function A1S-Y A1S-1Y A1S-Y A1S-1Y A1S-Y A1S-Y Gold ontacts Solder PB Tab HA-1 HA- HA-1V HA-V Relays & Sockets Timers Oversize AS-Y AS-1Y AS-Y AS-1Y AS-Y AS-Y AS-Y AS-1Y AS-Y AS-1Y AS-Y AS-Y HA1S-Y HA1S-1Y HA1S-Y HA1S-1Y HA1S-Y HA1S-Y Silver HA-5 HA-6 1. All assembled switches listed on previous page use contacts.. ontacts for use on position selector switch only Safety ever ock ircuit Breakers Terminal Blocks HA9Z-S HA-5V HA-6V

11 ø16mm - 6 Series Key Switches (Assembled) Key Switches Oversize Style Position ontact 90 -Position 90 -Position 90 -Position 90 -Position -Way spring return -Way spring return -Way spring return -Way spring return Solder Tab PB R A1K-6l A1K-Vl R A1K-16B A1K-1VB R A1K-6l A1K-Vl R A1K-16l A1K-1Vl R A1K-6l A1K-Vl R A1K-6D A1K-VD R AK-6l AK-Vl R AK-16B AK-1VB R AK-6l AK-Vl R AK-16l AK-1Vl R AK-6l AK-Vl R AK-6D AK-VD R AK-6l AK-Vl R AK-16B AK-1VB R AK-6l AK-Vl R AK-16l AK-1Vl R AK-6l AK-Vl R AK-6D AK-VD R HA1K-6l HA1K-Vl R HA1K-16B HA1K-1VB R HA1K-6l HA1K-Vl R HA1K-16l HA1K-1Vl R HA1K-6l HA1K-Vl R HA1K-6D HA1K-VD ontact Operations (for all selectors) Operator Position and ontacts ontact Operation -pos. () -pos. () eft Right eft enter Right As viewed from front of switch. eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N l Key Retention Option odes ode Description Key not retained in any position A (removable in all positions) B Key retained in right position only Key retained in left position only Key retained in left and right D ( position only) Key retained in center only E ( position only) Key retained right and center G ( position only) Key retained left and center H ( position only) Key cannot be removed from a spring-return position. 1. In place of l specify Key Retention ode from next page.. All assembled key switches have contacts. For see sub-assembled on next page.. PB terminal models also available with silver contacts change 1 or to 5 or 6 respectively, (ie A1K-Vl becomes A1K-6Vl). Switches & Pilot ights Display ights Relays & Sockets Timers Terminal Blocks ircuit Breakers

12 ø16mm - 6 Series Switches & Pilot Devices Selector Switches (Sub-Assembled) Switches & Pilot ights ontact + Safety ever ock + Operator = omplete Part Operators ontacts Display ights Style Position Function A1K-l A1K-1B A1K-l A1K-1l A1K-l A1K-D Gold Silver ontacts Solder PB Tab HA-1 HA- HA-5 HA-6 HA-1V HA-V HA-5V HA-6V Relays & Sockets AK-l AK-1B AK-l AK-1l AK-l AK-D 1. All assembled switches listed on previous page use contacts.. ontacts for use on position selector switch only Safety ever ock HA9Z-S Timers AK-l AK-1B l Key Retention Option odes ode Description AK-l AK-1l AK-l AK-D A B Key not retained in any position (removable in all positions) Key retained in right position only Key retained in left position only Terminal Blocks Oversize HA1K-l HA1K-1B D E G Key retained in left and right ( position only) Key retained in center only ( position only) Key retained right and center ( position only) HA1K-l HA1K-1l HA1K-l HA1K-D H Key retained left and center ( position only) Key cannot be removed from a spring-return position. ircuit Breakers 1. In place of l specify key removable code from table on right.. Operator includes two keys.

13 ø16mm - 6 Series Illuminated Selector Switches Oversize Style Position ontact 90 -Position 90 -Position 90 -Position 90 -Position -Way spring return -Way spring return -Way spring return -Way spring return Illuminated Selector Switches (Assembled) Solder Tab PB R A1F-6l-k A1F-lV-k R A1F-16l-k A1F-1lV-k R A1F-6l-k A1F-lV-k R A1F-16l-k A1F-1lV-k R A1F-6l-k A1F-lV-k R A1F-6l-k A1F-lV-k R AF-6l-k AF-lV-k R AF-16l-k AF-1lV-k R AF-6l-k AF-lV-k R AF-16l-k AF-1lV-k R AF-6l-k AF-lV-k R AF-6l-k AF-lV-k R AF-6l-k AF-lV-k R AF-16l-k AF-1lV-k R AF-6l-k AF-lV-k R AF-16l-k AF-1lV-k R AF-6l-k AF-lV-k R AF-6l-k AF-lV-k R HA1F-6l-k HA1F-lV-k R HA1F-16l-k HA1F-1lV-k R HA1F-6l-k HA1F-lV-k R HA1F-16l-k HA1F-1lV-k R HA1F-6l-k HA1F-lV-k R HA1F-6l-k HA1F-lV-k ontact Operations (for all selectors) Operator Position and ontacts ontact Operation -pos. () -pos. () eft Right eft enter Right As viewed from front of switch. eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N k ens/ed olor odes olor ode olor ode Amber A Blue S Green G Yellow Y Red R White W l Voltage/amp ode Voltage ode 5V D ED 1 6V A/D ED 1V A/D ED 4V A/D ED 4 10V A ED 8 6V A/D Incandescent 5 1V A/D Incandescent 6 4V A/D Incandescent 7 1. In place of k specify ens/ed olor ode from table above.. In place of l specify Voltage ode from table above.. amps also available in 5V D, 6V A/D, 1 V A/D or 10V A, change 4 or 7 using voltage/lamp codes (ie A1F-6-k uses 1V A/D ED). 4. All switches listed have contacts. For see sub-assembled on next page. 5. PB terminal models also available with silver contacts change 1 or to 5 or 6 respectively, (ie A1F-4V-k becomes A1F-64V-k). 6. ight independent of switch position. Switches & Pilot ights Display ights Relays & Sockets Timers Terminal Blocks ircuit Breakers

14 ø16mm - 6 Series Switches & Pilot Devices Switches & Pilot ights Display ights Relays & Sockets Operators Illuminated Selector Switches (Sub-Assembled) ontacts + Safety ever ock + amp Holder + amp + Operator + ens/handle = ompleted Unit Oversize Style Position Function A1F-0 A1F-10 A1F-0 A1F-10 A1F-0 A1F-0 AF-0 AF-10 AF-0 AF-10 AF-0 AF-0 AF-0 AF-10 AF-0 AF-10 AF-0 AF-0 HA1F-0 HA1F-10 HA1F-0 HA1F-10 HA1F-0 HA1F-0 Safety ever ock amp Holder HA9Z-S HA9Z-AH amps Style Voltage ED 5V D 6V A/D 1V A/D 4V A/D 10V A FTD-5k FTD-6k FTD-1k FTD-k FTD-Hk Incandescent 6V A/D 1V A/D 4V A/D H-06 H-14 H-8 Timers In place of k specify ED color code from table below. ontacts Terminal Blocks Silver Gold ontacts Solder PB Tab HA-10 HA-0 HA-50 HA-60 HA-10V HA-0V HA-50V HA-60V enses/handles Standard A1A-F-k k ens/ed olor odes olor ode Amber A Green G Red R Blue S Yellow Y White W Oversize All assembled selectors on previous pages use contacts. contacts are for use only on two position selectors. HA1A-F-k ircuit Breakers In place of k specify lens color code from table.

15 ø16mm - 6 Series Pushbutton Selectors (Assembled) Pushbutton Selectors Style Solder Tab PB PositionHA1R-6-j HA1R-V-j PositionHA1R-6-j HA1R-V-j 1. In place of j specify Button olor ode.. PB terminal models also available with silver contacts (change 1 or to 5 or 6 respectively, ie HA1R-V-j becomes HA1R-6V-j).. Pushed position, momentary only. ontact Operation Operator Position Style eft enter Right Normal Pushed Normal Pushed Normal Pushed Position Position eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N ever Switches eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N Blocked eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N Style Operation ontacts -Position -Position from top from bottom from top from bottom from both U D D U U D U D D U U D U D eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N Terminal Type Solder Tab PB A1T-6 A1T-V A1T-16 A1T-1V A1T-6 A1T-V A1T-6 A1T-V A1T-16 A1T-1V A1T-6 A1T-V A1T-6 A1T-V 1. PB terminal models also available with silver contacts (change 1 or to 5 or 6 respectively, ie A1T-V becomes A1T-6V).. Terminology: U = up, D = down, = center. j Button olor odes olor ode olor ode Amber A Blue S Green G Yellow Y Red R White W ontact Operation ontacts -pos. () -pos. () -pos. () Operator Position and ontact Information Spring from Top Spring Return from Bottom All models As viewed from front of switch. Down enter Up eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N eft Right ontact ontact NO N NO N eft Right eft Right eft Right ontact ontact ontact ontact ontact ontact NO N NO N NO N NO N NO N NO N eft Right ontact ontact NO N NO N Switches & Pilot ights Display ights Relays & Sockets Timers Terminal Blocks ircuit Breakers

16 ø16mm - 6 Series Switches & Pilot Devices Switch Engraving Order Form 6 Series Switches & Pilot ights opy this order form and use it to specify etter Height, Maximum Number of ines and Text to be engraved. To insure engraving accuracy, fax it to your IDE representative or Distributor. Your ompany: Telephone: Name: Address: Fax: Display ights PO: Please check one of the boxes below to indicate your choice of engraving options: to be Engraved: Switch Switch Switch Relays & Sockets # of ines etter Height Max. haracters Per ine # of ines etter Height Max. haracters Per ine # of ines etter Height Max. haracters Per ine 1 5/ 6 1 5/ 5 5/ 1 5/ 6 5/ 5 1/8 1/8 6 1/8 6 ustom* 1/8 6 1/8 6 ustom* 4 N/A 4 N/A 4 N/A Timers 1. Above mentioned specifications hold true for standard size pushbuttons (round, square and rectangular).. Oversize pushbuttons and pilot lights allow you to engrave 1 additional character.. Engraving is done on the button itself for non-iilluminated push buttons and on marking plate for illuminated pushbuttons and pilot lights. 4. Please enter text exactly how you want it engraved, take care to emphasize capital or small letters. *Engraving is possible, but character size will be smaller than standard sizes. Enter text to be engraved: Sample etter Sizes Terminal Blocks ine 1: ine : ine : ine 4: 1/8 etters: 5/ etters: ircuit Breakers For IDE Internal Use Only: Work Order #:

17 ø16mm - 6 Series Accessories Part Specifications Notes Ring Wrench Made of metal MT-001 amp Holder Tool (Made of Rubber) Made of rubber. Used for removing and replacing ED and incandescent lamps in illuminated units. OR-44 Used for tightening the plastic locking ring when installing the 6 series unit on a panel. Tightening torque should not exceed 9kgf cm when tightening the locking ring. Rubber tool used for replacing ED and incandescent lamps. ens Removal Tool For Illuminated pushbuttons and pilot lights. MT-101 Used for removing the lens or button from the housing. ED amp Incandescent amp Switch Guard Dust-proof over Terminal over Mounting Hole Plug Replacement Keys Replacement Engraving Inserts Replacement ocking Ring Replacement Anti-Rotation Ring Replacement Selector Inserts 5V D 6V A/D 1V A/D 4V A/D 10V A 6V 1V 4V A/D A/D A/D 90 degrees opening maintained 180 degrees opening, spring return FTD-5k FTD-6k FTD-1k FTD-k FTD-Hk H-06 H-14 H-8 T 1-/4 miniature flange base. In place of j specify ED olor ode (A, G, R, S, W, Y). 0.5W, T 1-/4 miniature flange base /A-K6 Prevents inadvertent switch operation. IP40 dust-tight A-KH6 rated. / A-K6SP A-KH6SP Prevents inadvertent switch operation. IP65 oiltight rated. Oversize /Sq HA9Z-K1 For round units A-D6 For square units For rectangular units Made of white nylon A-DQ6 A-DH6 Provides extra level of sealing for front-panel portion of switches. (Not applicable for units with oversize lenses or buttons). All removable contacts H6-V overs terminals to prevent possible electric shock. Unibody Pilot ights H6-PV RubberA-B6 Aluminum A-BM6 for A1K, AK, AK (#1) AS6-SK for HA1K (#1) oversize KG9Z-SK Rectangle Oversize Oversize Mushroom A6M-W A6Q-W A6H-W HA9Z-P1-W HA9Z-P-W HA9Z-P1-W All models HA9Z-N 6 standard A6-P 6 oversize HA9Z-P HA9Z-H1-j Fills unused panel cutouts. Made of nitrile rubber. Pushin installation from front of panel. IP65 (oiltight) rated. Fills unused panel cutouts. Made of aluminum. Screwon locking ring from inside of panel. IP65 (oiltight) rated. Pair of keys. Prevents rotation of switches in panel. (included with all assembled switches) Applicable to round oversize selectors only j = (G, R, S, W, Y) Switches & Pilot ights Display ights Relays & Sockets Timers Terminal Blocks ircuit Breakers Replacement Safety ever ock HA9Z-S

18 ø16mm - 6 Series Switches & Pilot Devices Description Used With Switches & Pilot ights Flush Bezel ø4mm round, metal (aluminum color), panel cut-out ø0.mm ø4mm round, plastic (black), panel cut-out ø0.mm Pushbuttons, pilot lights, illuminated pushbutton, selector switches, key selector switches and illuminated selector switches. 6 Switch + A9Z-SM61 A9Z-S61B 04mm square, plastic (black), panel cut-out 00.mm A9Z-S71B Display ights 4 x 0mm rectangular, plastic (black), panel cut-out ø0. x 6.mm Flush Bezel = A9Z-S81B Switch Guard w/ Flush Bezel (spring return), plastic (black) A9Z-KS8 Flush Switch Flush bezels not applicable for oversize units. Relays & Sockets Pilot ights (A*P,) Pushbuttons (A*B) Dimensions (mm) Illuminated Pushbuttons (A*) Panel Thickness 0.5 to 6 Gasket ocking Ring TO P OK Anti-rotation Ring Note: 1. Pushbuttons do not have lamp terminals.. Pilot lights have only lamp terminals. R15.5 P Board Terminal Width t OK Tab Terminal Width.8 0.5t Timers ø X X X1 NO N NO N ø ø P Board Terminal Solder/Tab Terminal Terminal Blocks ever Switches (A1T) ø18 Buzzer (AZ) ø R15.5 X X OK P Board Terminal 0.8W 0.5t 1. -R0.6 1 Tab Terminal.8W 0.5t Panel Thickness 0.5 to ircuit Breakers Emergency Stop Switch (HA1B) RO.61" (15.5mm) ø0.8" (1mm) + N N - ø0.70" (17.8mm) OK 0.6" (15.8mm) Rubber Washer Stopper ocking Ring PB Terminal 0.4" (8.7mm) 0.1" (5.4mm) 0.0" (5.mm) 0.41" 0.5" (10.5mm) (1.5mm) 1.4" (6mm) Panel Thickness 0.0"-0.4" (0.5~6.0mm) 0.4" (11mm) 0.98" (5mm) Ø 0.98" (4.9mm)

19 ø16mm - 6 Series Emergency Stop Switch (HA1E) - Short Body Style Selector Switches (A*S,) Illuminated Selector Switches (A*F,) Key Selector Switches (A*K) ø R15.5 X1 X X N NO 17.8 NO N OK P Board Terminal P Board Drilling ayout (Bottom View) 4 Panel ut-out ø P Board Terminal Width t Panel Thickness 0.5 to 6 Gasket ocking Ring TO P OK Anti-rotation Ring Illuminated Pushbuttons, Illuminated Selector Switches ø1. Hole Tab Terminal Width.8 0.5t Solder/Tab Terminal 5 5 HA1B E-Stop PB Mounting Pattern 0.1" (5.mm) Ø 0.05" (1.mm) 9 0.1" (5.mm) 6 ø18 ø18 Pilot ights, Selector Switches, Key Selector Switches ø1. Hole 0.1" 0.4" (5.4mm) (8.7mm) Pushbutton ever Switches ø1. Hole Switches & Pilot ights Display ights Relays & Sockets Timers Terminal Blocks ircuit Breakers

20 ø16mm - 6 Series Switches & Pilot Devices Oversize Flush Pushbutton and Pilot ights Switches & Pilot ights X X1 X NO N NO N 1.0 [5.9] 0.4 [11.0] 0.94 [4.0] Oversize Extended Non-Illuminated Pushbutton Timers Relays & Sockets Display ights NO N NO N 0.59 [15.1] Oversize Unibody Pilot ights 1.48 [7.5] Mushroom Pushbuttons NO N Terminal Blocks NO N Oversize Selector Switch NO N NO N 0.79 [0.0] 1.18 [0.0] ircuit Breakers 0.94 [ [19.5]

21 ø16mm - 6 Series Oversize Key Switch N NO N NO ever Switch Flush Bezel.6 NO N N NO Mounting Bracket ø Gasket ø 0 Flush Bezel Metal Plastic ø18 ø ø4 ø [9.0] Flush Bezel Mounting Hole ayout 4 min. +0. ø min. 4 min min [.8] Flush Bezel with Switch 9 Panel Thickness 0.5 to 5 4 Selector Switches Illuminated & Non-illuminated 0 min min. Key 18.1 ever 17 Switches & Pilot ights Display ights Relays & Sockets Timers Terminal Blocks ircuit Breakers

22 ø16mm - 6 Series Switches & Pilot Devices Switches & Pilot ights Terminal onfigurations A-K6SP Non Illuminated Pushbutton Pilot ights Illuminated Pushbuttons Buzzer TOP Display ights Relays & Sockets Timers Terminal Blocks ircuit Breakers NO N NO N amp Terminal (+) amp Terminal ( ) X X X1 TOP amp Terminal (+) amp Terminal ( ) X X X1 TOP NO N NO N Input Terminal (X) X X Steady Slow Quick X1 X1 Input Terminal (X1) Buzzer Sound Switch A-KH6SP minimum R Panel Thickness 0.5 to minimum 14 5 minimum 19 minimum A-D6 A-DQ6 A-DH6 H6-V A-B6 ø TOP ø18 ø Waterproof gasket for dust cover Waterproof gasket for dust cover Waterproof gasket for dust cover A-BM6 FTD ED amp.5 1 Internal ircuit ø17.8 Gasket ocking Ring Panel Thickness 0.5 to 6 A-B6 6 ED hip Protective Diode Zener Diode ø18 ø16.5

23 ø16mm - 6 Series Pushbutton Assembly amp Installation amps can be replaced in two ways: 1. If contacts are accessible (or pushbutton not installed in a panel) then it is easiest to first remove the contacts from the operator. This will allow easy access to the lamp/lamp-holder assembly. Grab lamp, depress slightly, and turn counter clockwise. amp can then be removed by pushing it back through the lamp holder.. If contacts are not accessible, then the lamp can be replaced by fi rst removing the lens from the operator. Just pull lens straight out either with a fi ngernail or optional lens removal tool (MT-101). amp/lamp-holder assembly can then be removed with lamp removal tool (OR-44). Insert lamp removal tool through operator, depress slightly, turn counter clockwise, then pull lamp/lamp-holder assembly out. amp can then be removed by pushing it back through the lamp holder. Engraving enses All buttons and lenses can be engraved directly on the outside surface. Illuminated lenses also allow for engraving on a plate that is underneath the colored section of the lens. Remove the colored section of the lens by pulling on the edge while simultaneously unhooking it from the latches on the lens holder. The marking plate will then be accessible. It can then be engraved or a thin marked insert (such as mylar or paper) can be sandwiched between the marking plate and colored section of the lens. General Instructions Grooves Fitting Grooves Engraving Surface olor ens Marking Plate ens Holder Panel Mounting Before any unit can be mounted into a panel, the contact block must be removed. Slide metal locking lever and pull contact off. oosen and remove the locking ring and square anti-rotation ring from the operator and insert operator through panel cutout from the front of the panel. Slide on anti-rotation ring and tighten locking ring, using locking ring wrench (MT-001). Slide contact block onto operator, observing TOP marking on both parts. Slide metal locking lever in direction indicated by OK. The yellow plastic safety lever lock can then be snapped onto the locking lever; this will prevent vibration or maintenance actions from releasing the contact from the operator. PB Mounting Being able to separate the contacts from the operator allows for assembly of the front panel components (operator and lens) to be performed in tandem with the P board assembly and soldering. For applications where multiple rows of pushbuttons are mounted closely together, or where other components may obstruct access to the contact locking lever, be sure to include access holes in the P board (refer to P board layout dimensions for location). Also be sure to allow for space above and to the side of contact to ensure that no components block the contact block locking lever. P board pins are designed to rest on the PB, take this into consideration to ensure that pins do not short closely spaced traces. Switches & Pilot ights Display ights Relays & Sockets Timers Terminal Blocks ircuit Breakers