Oiltight Switches & Pilot Devices
|
|
- Tabitha Bates
- 5 years ago
- Views:
Transcription
1 mm - Series Transfomer Contact Assemblies For use with Illuminated Pushbuttons. Style Contacts Part Number 12V AC with LED 24V AC with LED 48V AC with LED 12V AC with Incandescent 24V AC with Incandescent 1. In place of k, specify the LED Color Code. k = A, G, R, S, W or Y 2. 6V LED or incandescent lamp included. Non-illuminated Pushbuttons -FL1H2-k -FL2H2-k -FL1H2-k -FL11H2-k -FL1M4-k -FL2M4-k -FL1M4-k -FL11M4-k -FL1T8-k -FL2T8-k -FL1T8-k -FL11T8-k -FL1H2 -FL2H2 -FL1H2 -FL11H2 -FL1M4 -FL2M4 -FL1M4 -FL11M4 Flush (1B-M1, -A1) Extended (1B-M2, -A2) mm Mushroom (1B-M3 -A3) 19 mm Mushroom (1B-M4, -A4) ø6mm Mushroom (1B-M5) Square Flush (2B-M1, -A1) ø Square Extended (2B-M2, -A2) (Bottom View) Terminal Wiring Arrows indicate access directions for wiring contact block 2 contact blocks USA: IDEC Canada: IDEC 551
2 mm - Series Oiltight Switches & Pilot Devices s Switches & Pilot Lights Flush (Round & Square) Round Square 24.8 Extended 18.5 ø23.5 Extended Extended with Full Shroud mm Mushroom Display Lights Relays & Sockets Emergency Stop Pushbuttons mm Head Pushlock Turn Reset (1B-V3) Terminal M3.5 Timers 1 contact block 2 contact blocks mm Head Pushlock Turn Reset (1B-V4) mm Head EMO Pushlock Turn Reset (1B-V4) Lock Lever Terminal Blocks mm Head Pushlock Key Reset (1B-X4) ø6mm Head Pushlock Turn Reset (1B-V5) Circuit Breakers 15 ø
3 mm - Series mm Head Push-Pull (1B-Y2) mm Head Unibody Pushlock Turn Reset (1B-BV4).5 Illuminated E-Stop Pushbuttons (1E-LV4) Terminal Cover Lamp Terminal Terminal Arrangement (Bottom View) 1E-BV4 Side 1E-LV4.2 (NC).3 (NO).1 (NC).4 (NO) (-) Emergency Stop Stations B-V4R Box Cover Mouting s Box Cover A 14 LAMP 59.5 TOP.2 (NC).3 (NO).1 (NC).4 (NO) (-) Box Base Terminal Cover Mounting Hole.3 R.8 max Dimension A (mm) Pushlock Turn Reset Pushlock Key Reset (Key inserted: 49.4) Push Pull The minimum mounting centers shown below are applicable to E-Stop switches with one layer of contact blocks (two contact blocks). When two layers of contact blocks are mounted, determine the minimum mounting centers for ease of wiring. Unit Vertical Spacing Horizontal Spacing 1B-V3 1B-V4 1B-X4 1B-Y2 5 mm 5 mm 1B-V5 6 mm 6 mm 4-M4 Tapped Holes for Rear Mounting (Depth: 1 mm) 2-Front Mounting Holes 62 ø14 Knockout ø4.6 USA: IDEC Canada: IDEC 553
4 mm - Series Oiltight Switches & Pilot Devices Pilot Lights Switches & Pilot Lights Full Voltage Flush Dome Round/Dome Square Flush 1.5 Transformer Display Lights 24 DC-DC Converter 2.1 Flush Dome 1.5 Round/Dome Square Flush Close mounting on 3mm centers Degree of protection: IP65 3 min..3 Relays & Sockets Jumbo Dome Pilot Lights 1 to 5 Flush Dome Round/Dome Square Flush ø66 LED Lamp LSTDB Light blue: LSTDB Base BA9S/ Illumination Color 2.4 ø1.6 Incandescent Lamp LSB Base BA9S/ ±2 2 ±1 ø1 3 min. When mounting transformer or DC-DC converter type units on 3mm centers vertically and horizontally, keep the ambient temperature below 4ºC. R.8 max Timers Rubber Terminal Blocks Illuminated Pushbuttons Full Voltage Models 1 2 s 3 s Circuit Breakers 1 contact block 5.2 (1 block) 2 contact blocks 65.8 (2 blocks) 3 contact blocks.2 (3 blocks) 554
5 mm - Series Illuminated Pushbuttons con t 4 s Terminal Wiring Arrows indicate access directions for wiring. Transformer Models 3 4 s 85.8 (4 contacts) 89. (2 blocks) 19.5 (4 blocks) Non-illuminated Selector & Key Switches Knob 1 contact block 2 contact blocks Key Illuminated Selector Switches Full Voltage Model 69.4 (2 blocks) 89.4 (4 blocks) 48.5 (1 or 2 blocks) 68.5 (3 or 4 blocks) Full Voltage Adaptor DC-DC Converter Models 3.5 ø Tranformer 89.5 (2 blocks) 19.5 (4 blocks) Transformer Model 3 4 M.3.5 Terminal ø 89.5 (2 blocks) 19.5 (4 blocks) Terminal Wiring Arrows indicate access directions for wiring. Full Voltage Adaptor Tranformer USA: IDEC Canada: IDEC 555
6 mm - Series Oiltight Switches & Pilot Devices Dual Pushbutton Switches & Pilot Lights Without Pilot Light 49.4 (2 contacts) 69.4 (3 or 4 contacts).3 R.8 max Without Button Markings With Button Markings (I/ON and O/OFF) 55 3 Display Lights Relays & Sockets With Pilot Light Full Voltage (Bottom Button) (Top Button) Rubber (2 contacts), 89.4 (4 contacts) (Note) ON OFF The depth of a 3-contact model depends on the combination of contact blocks at top and bottom pushbuttons. Top Button 1 contact block 2 contact blocks Bottom Button 2 contact blocks 1 contact block Depth 89.4 mm 69.4 mm -The 3.2 mm recess is for preventing rotation and is not necessary when a nameplate or anti-rotation ring is not used. -When using the safety lever lock, determine the vertical spacing in consideration of convenience for installing and removing the safety lever lock. -Recommended vertical spacing: 1 mm -The minimum mounting centers are applicable to switches with one layer of contact blocks (two contact blocks). When two layers of contact blocks are mounted, determine the minimum mounting centers for ease of wiring. Transfomer (24V minimum) Transformer (48V) Transformer Transformer, DC-DC Converter Timers 9.5 (2 contacts), 99.5 (4 contacts) 89.5 (2 contacts), 19.5 (4 contacts) Terminal Blocks Monolever ø (2 blocks) 69.4 (4 blocks) 8 2 Circuit Breakers max. 36 max
7 mm - Series Accessory Dimensions LW9Z-BM Metallic Mounting Hole Plug ø Z-DD Dual Pushbutton Rubber Cover Z-KL1 Padlock Cover 3 ø5 (ID: ø44.4) 9Z-KG Key Hole ø R : 1.2 to OB-31 Rubber Mounting Hole Plug 3.5 ø -VG1 Dual Pushbutton Barrier 45.8 to Waterproof Rubber.5t Z-RL Anti-Rotation Ring MW9Z-T1 Wrench 11 LS-TK191 driver 1.5 Mounting Adapter 9Z-KG2.2 ø9 : 1.2 to 4 ø6.1 TOP Remove 36.5 ø28 9Z-KG3 9Z-KG4 LSTD 42 ø ø4 5 ø ø9 OR-55 Lamp/LED Removal Tool ø11.6 -VL1 Barrier Lock Lever 26.5 Install ø14 Safety Lever Lock USA: IDEC Canada: IDEC 55
Oiltight Switches & Pilot Devices
Oiltight Emergency Stop Stations Part Numbers: Emergency Stop Stations Description Contacts Plastic Bezel Metal Bezel Ø 40mm Pushlock Turn Reset 1NO-1NC HW1X-BV411-R* HW4X-BV411-R* 2NC HW1X-BV402-R* HW4X-BV402-R*
More informationOiltight Switches & Pilot Devices
Oiltight Switches & Pilot Devices HW Series 22mm IEC Style Global Pushbuttons Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Key features include: Locking
More informationø22mm HW Series Control Units
TREICHL-ATM Electronic Auf der Bült 10-12 D 41189 Mönchengladbach Tel. 02166 958545 Fax 02166 958547 email: atm@treichl.de internet: mm HW Series Control Units HW Series Control Units (Selection Guide)
More informationStyle Contact Type No. Button Color Code ø40mm Mushroom 1NC YW1B-V4E01R YW1B-V4E21R. Gasket ø40 YW1L-V4E11Q0R 2NC YW1L-V4E02Q➂R 6 (12V AC/DC)
Pushlock Pull/Turn eset Style Contact Type No. Button Color Code ø40mm Mushroom NC YWB-V4E0 2NC 3NC NO-NC NO-2NC 2NO-NC YWB-V4E02 YWB-V4E03 YWB-V4E YWB-V4E2 YWB-V4E2 ed only Dimensions Panel Thickness
More informationSwitches & Pilot Devices
ømm - HW Series Key features: Locking lever removable contact blocks Finger-safe IP contacts Tamperproof construction All E-stops meet EN6947-5-5, and are compliant with SEMI S standards Worldwide approvals
More informationHW Series 22mm IEC Style Global Pushbuttons
ømm - HW Series Blocks Signaling Lights Key features: Locking lever removable contact blocks Finger-safe IP contacts as standard, other terminal styles available Tamperproof construction All E-stops meet
More informationø22mm HW Series Control Units Control Units
mm HW Series Control Units Control Units HW Series Control Units (Selection Guide) Function Emergency Stop Switch (Unibody Type) Emergency Stop Switch (Separate Type) Pushlock Turn eset Category ø40mm
More information22mm XW E-Stops. IEC , EN , JIS C , UL508, UL991, NFPA79, CSA C22.2 No. 14, GB
ø22mm XW E-Stops Circuit Breakers Terminal Blocks ors Timers elays & Sockets Signaling ights 22mm XW E-Stops Key features: The depth behind the panel can be as little as 46.4 mm for 1 to 4 contacts (with
More informationSwitches & Pilot Devices
Industrial utomation Catalog Section - U906 Switches & Pilot Devices HW Series Oiltight Switches & Pilot Devices Selection Guide Non-Illuminated Pushbuttons Emergency Stop Pushbuttons Emergency Stop Stations
More informationOiltight Switches & Pilot Devices
Oiltight Non-Illuminated ushbuttons (Sub-Assembled) Contact Block + Operator + Button = Completed Unit art Numbers: Operators Style art Number Momentary Maintained LW1B-M0 LW1B-A0 LW2B-M0 LW2B-A0 Mushroom
More informationLW Series offer flexibility in space-saving package
ourtesy of Steven Engineering, Inc. 230 yan Way, South San Francisco,, 94080-6370 Main Office: (650) 588-9200 Outside Local rea: (800) 258-9200 www.steveneng.com LW Series offer flexibility in space-saving
More informationSwitches & Pilot Devices
Key features: Two button sizes: ø29 and ø4mm ead-free, ohs compliant, (EU directive 22/95/EC) Depth behind the panel: Standard - only 27.9mm for 1 to 4 contacts Unibody - only 23.9mm for 1NC or 2NC IDEC
More informationXW Series E-Stops. Safety. Selection Guide ø22mm XW E-Stops
Safety Selection Guide... 288 ø22mm XW E-Stops... 289 www.idec.com/usa/estop XW Series E-Stops Overview Interlock Switches Enabling Switches Safety Control ight Curtains AS-Interface Safety at Work Table
More informationNO NO NO. Standard Interlock Safety Switches HS6B. HS5E-K Key Locking Safety Interlock Switches
Standard Interlock Safety Switches HS6B HS5E-K Key Locking Safety Key features: Head removal detection circuitry. High-security pin tumbler key types are used. Sixteen types of key numbers are available,
More informationMW Series Control Units
IP waterproof and dust-proof enclosure Suitable for installation in harsh environment, such as construction machines Prevents entry of sand and dust. eliable operation under high operation load Solder/tab
More informationø25mm TWS Series Switches & Pilot Lights
ø25mm TWS Series Switches & Pilot Lights ø25 TWS Series Selection Guide Function Pushbutton Category Flush Extended Extended with Full Shroud Mushroom Mushroom with Full Shroud Momentary/Maintained Shape
More informationSwitches & Pilot Devices
ø16mm - 6 Series Key features: 5/8 (16mm) mounting holes ocking lever removable contact blocks Solder terminal or PB terminal options Available assembled or as sub-components Worldwide approvals Incandescent
More informationEmergency Stop Switches Selection Guide
Selection Guide New Concept Reverse Energy Structure Safe Break Action ø9mm Button E-BV3 (Solder, PC Board Terminal) Model Mark Page D-8 ø6m Mount Hole Non illuminated Detachable Block Pushlock Pull or
More informationOiltight Switches & Pilot Devices
ø0mm - TWTD Series iltight Switches & Pilot Devices TWTD Series Full Size NEMA Pushbuttons elays & Sockets Timers Terminal Blocks ircuit Breakers Display Lights Switches & Pilot Lights TWTD Series: Heavy
More informationXA Series Emergency Stop Switches (w/removable Contact Block)
XA ø6 XA Series Emergency Stop Switches (w/removable Contact Block) The World s First ø6 mm, 4-contact Emergency Stop Switch. Compact size - only 7.9 mm deep behind the panel. Reliable Safe break action.
More information22mm XW E-Stops. UL File #E68961 CCC No Specifications
XW Series 22mm XW E-Stops Key features: The depth behind the panel is only 48.7 mm for 1 to 4 contacts (with terminal cover) for illuminated and non-illuminated units. IDEC s original Safe break action
More informationXW Series E-Stops. Safety. ø22mm XW E-Stops Phone: Fax: Web: -
Safety ø22mm XW E-Stops... 277 XW Series E-Stops Overview Interlock Switches Enabling Switches Safety Control ight Curtains AS-Interface Safety at Work Phone: 8.894.412 - Fax: 888.723.4773 - Web: www.clrwtr.com
More informationSwitches & Pilot Devices
ømm - TW Series features: TW NEMA Switches with snap-on contacts Corrosion resistant octagonal chrome plated locking bezel Snap-on 0A contact blocks LED illumination Slow make, double break, contacts Modular
More informationOiltight Switches & Pilot Devices
ø0mm - TWTD Series iltight Switches & Pilot Devices TWTD Series Full Size NEMA Pushbuttons elays & Sockets Timers Terminal Blocks ircuit Breakers Display Lights Switches & Pilot Lights TWTD Series: Heavy
More informationø25mm TWS Series Control Units
ø25mm TWS Series ontrol Units ø25 TWS Series ontrol Units (Selection Guide) Function ategory Flush Extended Pushbutton Extended with Half Shroud Momentary/ Extended with Full Shroud Mushroom Shape ABS1
More informationø25 TWS Series Switches & Pilot Lights
ø25 TWS Series Switches & Pilot Lights General-purpose switches & pilot lights for various applications Heavy-duty type for high-level protection against harsh environment No terminal cover required (except
More informationOiltight Cam Switches
ø0mm - CS Series CS Series Heavy Duty Cam Switches Key features of the CS Series include: Wide variety of heavy-duty oiltight cam switches Operators available up to positions Switches made with a double
More informationSwitches & Pilot Devices
ø16mm - 6 Series 6 Series Miniature Switches and Pilot Devices Key features of the 5/8 6 Series include: 5/8 (16mm) mounting holes ocking lever removable contact blocks Solder terminal or PB terminal options
More informationAP/UP Series Miniature Pilot Lights UZ Series Miniature Buzzer
AP/UP Series Miniature Pilot Lights UZ Series Miniature Buzzer Pilot Lights / Buzzer Selection Guide Series AP Series Miniature Pilot Lights AP6S Series Miniature Pilot Lights Mounting Hole Size ø6 ø2
More informationMiniature Switches & Pilot Devices
ø16mm - 6 Series Miniature 6 Series Miniature Switches and Pilot Devices Key features of the 5/8 6 Series include: 5/8 (16mm) mounting holes ocking lever removable contact blocks Solder terminal or PB
More information30mm Hazardous Location Switches:
30mm Hazardous Location Switches: EU2B Series PRODUCT DESCRIPTION Complying with UL and ATEX Directives for hazardous environments, new 30mm EU2B Hazardous Location Switches provide increased safety for
More informationContacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Low energy contacts gold plated. Minimum PUSHBUTTON
Pilot Devices Technical data UL General UL technical data Contact blocks Rated insulation voltage, UL 600V Rated thermal current 10A / 600VAC 2.5A / 600VDC Minimum rating 24VDC, 5mA Mechanical life (millions
More informationEmergency Stop Switches
Emergency Stop Switches Emergency Stop Switches (Selection Guide) Series Emergency Stop Switch Name ø6mm X6 Series Pushlock Pull / Turn Reset (Unibody) ø6mm XA Series Pushlock Pull / Turn Reset (Unibody)
More informationMiniature Switches & Pilot Devices
A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and
More information22mm Push Buttons and Switches
PUSH UTTONS/SWITCHES 22mm Push uttons and Switches Emergency Stops Selector Switches Lever Type Small Head 71.4 2 positions Large Head 3 positions unit: mm S2ER E3 R A D Size CONTACT LOCK * S2SR S 3 R
More informationC & S 22 mm NON-ILLUMINATED PUSHBUTTONS METAL BEZEL
C & S 22 mm NON-ILLUMINATED PUSHBUTTONS METAL BEZEL OPERATING HEADS, - IP65 CONTROL UNITS WITH CHROMIUM PLATED METAL BEZEL PROJECTING PUSH BUTTON BOOTED PUSH BUTTON IP66 WITH TRANSPARENT BOOT IP66 MUSHROOM
More informationPUSHBUTTON SWITCH / SELECTOR SWITCH / ILLUMINATED PUSHBUTTON SWITCH. For the lamps, candescent lamps and LED lamps are standardized.
PUSHUTTON SWITCH / SELECTOR SWITCH / ILLUMINATED PUSHUTTON SWITCH PSA TYPE, LPSA TYPE FEATURES 1 3 Protective construction of the PSA type is IP65 and the oil-proof which applys to wide variety of applications.
More informationSwitches & Pilot Devices
ø16mm - A6 Series A6 Series Miniature Switches and Pilot Devices: 16mm Key features: 16mm (/8 ) mounting hole ED illumination ompact design saves space Momentary, Maintained, Selectors, and E-Stops Gold-clad
More informationContact blocks and lamp blocks with holder for front mounting Max. number of blocks Included in holder blocks Catalog No. Ref.
Pilot Devices Accessories Contact blocks and lamp blocks with holder for front mounting Max. number of blocks Included in holder blocks Catalog No. Ref. Code List Price For non-illuminated operators 3
More information30mm Hazardous Location Switches:
30mm Hazardous Location Switches: EU2B Series PRODUCT DESCRIPTION Complying with UL and ATEX Directives for hazardous environments, new 30mm EU2B Hazardous Location Switches provide increased safety for
More informationPush Button Units and Indicator Lights
3SB3, Inscriptions, 22 mm Insert labels Push Button Units and Indicator Lights Push buttons (clear) and illuminated push buttons with a flat button can be fitted with insert labels for identification purposes,
More informationXW Series Emergency Stop Switches
ø ø mm, 4-contact Emergency Stop Switch. Compact size only 37. mm deep behind the panel (screw terminal type 4 mm with terminal cover). eliable Safe break action. The depth behind the panel is only 37.
More informationThe specified data apply only if actuators/signal indicators are combined with contact blocks and lamp sockets within the same product range.
General data QR control component range For a mounting hole diameter of.3 mm to IEC 60947 50V/10A max. Water-jet proof IP65 collar shapes The lamps of the pushbuttons can also be replaced from the front
More informationQuality touch! Pushbuttons and selector switches. Ø22mm QUICK AND EASY ACTUATOR INSTALLATION. Click! Click!
Pushbuttons and selector switches Ø22mm Quality touch! QUICK AND EASY ACTUATOR INSTALLATION Click! Click! - Actuator fixing on the mounting surface, through a Ø22mm drilled hole, is obtained using its
More informationPushbuttons/Selectors/Pilot Lights/Buzzers AR22 and DR22 General information
General information The AR22 now uses a release arm with a wedge mechanism developed by Fuji Electric FA. This enables you to mount or remove the operator and contact block without using any tools. When
More informationIDEC E-Stop Switches. Simply Safe. Smart Products. Simple Solutions.
HW Switches In basic black or stylish metal, the HW series of mm switches from IDEC are available in several styles to dress up any panel. HW pushbuttons and pilot devices are internationally-rated, designed
More informationNRBM Series. Between main circuit terminals: 2,000V AC, 1 minute Between main circuit and auxiliary contact: 2,000V AC, 1 minute
NRBM circuit breakers are the largest in rated current (A to 50A) among the IDEC circuit breakers series. These small sized, high-effi ciency breakers offer a variety of protection characteristics that
More informationPushbuttons B3. Options and ordering codes. Exploded view. BS 3. Green
Pushbuttons 3 IP65 protection Opaque or illuminated Metal or lack bezels Snap-on contact blocks Colour coded contacts Pushbutton stations International approvals including UL and CS Options and ordering
More informationPUSHBUTTON SWITCH / SELECTOR SWITCH / ILLUMINATED PUSHBUTTON SWITCH HSA TYPE, LHSA TYPE
PUSHUTTON SWITCH / SEECTOR SWITCH / IUMINATED PUSHUTTON SWITCH HSA TYPE, HSA TYPE FEATURES Protective construction of the HSA type is IP65 and the oil-proof, which applys to wide variety of 1 applications.
More informationA22E. Model Number Structure. Emergency Stop Switch. Model Number Legend. Completely Assembled. Install in 22-dia. or 25-dia.
Switch Install in 22-dia. or 25-dia. Panel Cutout Direct opening mechanism to open the circuit when the contact fuses. Safety lock mechanism prevents operating errors. Easy mounting and removal of Switch
More informationRelays & Sockets. RV8 Series 6mm Interface Relays. (when using combination of RV relay and SV socket) RV8H Electromechanical Part Numbers
RV8 Series 6mm Interface Relays Key features: Class I, Division 2 and Class I, Zone 2 Hazardous Location options (electromechanical relays only) Solid State relay versions available Only 70mm in height
More informationControl & Signalling Devices 22.5 mm. RoHS. Compliant
Control & Signalling Devices 22.5 mm RoHS Compliant Contents Characteristics General Characteristics Products Push Buttons, Selector Switches, Latching Mushroom Head Push Buttons, Pilot Lights & Illuminated
More informationNRA Series. Between main circuit terminals: 2,000V AC, 1 minute Between main circuit and auxiliary contact: 2,000V AC, 1 minute
RA Series RA Series Key features of the RA series include: Available in 5 different styles Excellent overload and short circuit protection Small size and high-efficiency Life expectancy of over 0,000 operations
More informationIlluminated buzzer for elevators, robots and production sites
ø22mm HW1Z Illuminated Buzzer Illuminated buzzer for elevators, robots and production sites Combination buzzer and pilot light Alerts workers of danger with sound and light Waterproof construction HW1Z
More informationTWN TWND Series. Heavy duty switches & pilot lights offer both variety and reliability. For more information, visit
and D eries Heavy duty switches & pilot lights offer both variety and reliability. Pilot light is not approved by EN standards. DC-DC convertor unit is not approved by standards. ee website for details
More informationBulletin 800MR/800MB Push Buttons
Bulletin 800MR/800MB Contact Blocks Bulletin 800M contact blocks are available with quick connect type terminals and screw terminals with pressure plates (in two sizes). Each quick connect type termination
More informationø12 A2 Series Miniature Control Units
ø2 A2 Series Miniature Control Short 22-mm-long body miniature control unit series with bright LED illumination face and snap-action switching. Degree of protection: IP40 and IP5 (IEC 0529) All series
More informationUP Series Miniature Pilot Lights
Available in Various Sizes Five illumination colors: amber, green, red, white, yellow Various sizes and design. Available with a built-in current limiting resistor. Waterproof () types available for and.
More informationAP Series / UP Series Miniature Pilot Lights UZ Series Miniature Buzzer
AP Series / UP Series Miniature Pilot Lights UZ Series Miniature Buzzer Pilot Light / Buzzer Selection Guide Series AP Series Miniature Pilot Lights AP6S Series Miniature Pilot Lights Mounting Hole Size
More informationDoor Interlock Switches
HSE Series HSE Series Full Size Locking Switches Overview X Series E-Stops HSE features: Basic unit and solenoid unit in one housing Plastic Housing: Light weight Ease of Wiring: All the terminal screws
More informationHS1E Series Full Size Interlock Switch with Locking Solenoid
HS1E Series HS1E Series Full Size Interlock Switch with Locking Solenoid HS1E Key features include: Basic unit and solenoid unit in one housing Plastic Housing: Light weight Ease of Wiring: All the terminal
More informationContacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Wire size
Technical data UL Pilot Devices General UL technical data Contact blocks Rated insulation voltage, UL 600V Rated thermal current 10A / 600VAC 2.5A / 600VDC Minimum rating 24VDC, 5mA Mechanical life (millions
More informationø22mm XW Series Emergency Stop Switches (Mechanical Indicator) Smooth Button Delivers Style and Cleanliness
ø22mm XW Series Emergency Stop Switches (Mechanical Indicator) Normal/latched status can be checked from a distance with the mechanical indicator function. The smooth ridgeless button prevents dust build-up
More informationPushbuttons & Indicating Lights Pushbutton Control Stations Assembled Renewal Parts H Series, Renewal Parts
-26 Pushbutton Control Stations Assembled 0250H Series, Renewal s Renewal s Figure -4. Type N Renewal s Table -27. Assembled Stations Type N Renewal s Item Type N Square Buttons Cover 2 Element Single
More informationKPB 25 W M R &30 CONTROL COMPONENTS. Push Button Switches. KPB, KSL, KPL and KBL series are designed for a wide range applications.
25&3 CONTROL COMPONENTS KPB, KSL, KPL and KBL series are designed for a wide range applications. The contact material is Ag alloy. Protection IP4 or IP65 is available. Finger proof structure UL approved
More informationSolenoid Locking Safety Switches
HSC HSC Full Size Solenoid Locking Switches Key features: Rugged aluminum die-cast housing 00N locking retention force Flexible Installation: The actuator can be accessed from two directions Select from
More informationPushbuttons/Selectors/Pilot Lights/Buzzers AR30 and DR30 General information
Pushbuttons/electors/Pilot Lights/Buzzers AR and DR General information The full range of the contact blocks and transformer units suitable for the AR22 and DR22 series may also be fitted to the AR and
More informationPUSHBUTTON UNITS & INDICATOR LIGHTS CLASS 52 - WATERTIGHT / OILTIGHT - 30 MM HEAVY DUTY CUSTOM SELECTOR SWITCH DESIGNS
CLASS - WATERTIGHT / OILTIGHT - 30 MM HEAVY DUTY CUSTOM SELECTOR SWITCH DESIGNS Assembled Non-Illuminated Selector Switches: - Determine Contact Block and Location. - Select Block Suffix. Example: J =
More informationCommunication & Networking
Automation & Sensing AS Interface Overview... 464 www.idec.com/communication & Networking s Supplies Table of Contents LED Lighting - Pg. 1 Automation & Sensing - Pg. 21 Safety - Pg. 281 Switching & s
More informationSwitches & Pilot Devices
Selection Guide... 45 Miniature... 45 AP Series ø8-6mm... 45 A8 Series ø8mm... 456 ø6mm... 46 A E-Stops ø6mm... 46 B Series ø6mm... 468 6 Series ø6mm... 5 ømm... 55 W E-Stops ømm... 55 W Series ømm...
More informationRAFIX 22 QR. General data. Content
QR General data QR control component range For a mounting hole diameter of.3 mm to IEC 60947 50V/10A max. Water-jet proof IP65 collar shapes The lamps of the pushbuttons can also be replaced from the front
More informationSwitches & Pilot Devices
ø0mm - TWTD Series TWTD Series Full Size NEMA Pushbuttons elays & Sockets Timers ircuit Breakers ontactors Terminal Blocks Signaling ights TWTD Series: Heavy duty switches built to last features: Variety
More informationHS1B R - R. Door Interlock Switches. HS1B Series. HS1B Series Full Size Interlock Switch. Part Number. HS1B features: Part Number Key.
HSB Series HSB Series Full Size Interlock Switch HSB features: Body Rugged aluminum die-cast housing Direct Opening Action: If the door is forced open, the contacts are disconnected even if they are welded
More informationPushbuttons/Selectors/Pilot Lights AH25 General information
Pushbuttons/Selectors/Pilot Lights AH5 General information Features Oil and dust-proof construction Protection complies with IEC Standard IP65.Special seals keep out oil, water, dust, and chips. This gives
More informationLED Machine Lighting
Key features Mini (LF1D-C) Location Length LF1D (IP69K) and LFD (IP67, IP67f) Series Machine Tools Food & Beverage Processing Equipment Vision Systems With their rugged construction, the LF1D/D series
More informationGT5P Series ON Delay Timers
T5P Series T5P Series ON Delay Key features of the T5P series include:, 5A contacts 8-pin, octal base 9 time ranges Repeat error ±0.2% maximum Control settings by hand or screwdriver Power ON and timing
More informationø30mm Series Switches & Pilot Lights
ømm Series Switches & Pilot ights ø ø Series Switches & Pilot ights (Selection Guide) Function ategory XN Series Emergency Stop Switch HN Series Emergency Stop Switch Plastic Bezel Flush Bezel Padlockable
More informationSERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC ROCKER SWITCHES PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants
More informationSECTION MOTORS & MOTOR CONTROLLERS
SECTION 15170 MOTORS & MOTOR CONTROLLERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Electric motors. B. Motor controllers for Packaged equipment. 1.02 SUBMITTALS A. Wiring diagrams with electrical characteristics
More informationHS2B N B - R. Door Interlock Switches. HS2B Series. Full Size Interlock Switch. Part Number. HS2B features: Part Number Key.
HSB Series HSB Series Full Size Interlock Switch HSB features: Body Direct Opening Action: If the door is forced open, the contacts are disconnected even if they are welded or stuck Available with or without
More informationControl Buttons Series 8082
www.stahl.de > Contact element with 1 NO contact 1 NC contact, positive opening > Contact material silver-nickel or gold-plated > 9 different actuators Push Mushroom push Selector switch Rotary actuator
More informationA02 SERIES ILLUMINATED OR NON-ILLUMINATED PUSHBUTTON SWITCHES Panel cut-out Ø22 or 29.5 x 21.5
ILLUMINATED OR NON-ILLUMINATED PUSHBUTTON SWITCHES Panel cut-out Ø22 or 29.5 x 21.5 A pushbutton assembly requires: screen + lamp (if illuminated) + operator + one or two switchblocks To order these elements,
More informationEmergency stops Award winning design
Emergency stops Award winning design Emergency stops Choosing the right emergency stop device is vital in order to increase the safety for your personnel and equipment. ABB has a very wide range of emergency
More informationø10 A1 Series Miniature Control Units
A1 ø10 A1 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
More informationPUSHBUTTONS SELECTOR SWITCHES CONTROL & INDICATING DEVICES. Top Quality Engineered for Maximum Performance
SELECTOR SWITCHES CONTROL & INDICATING DEVICES Heavy Duty Oil Tight Dust Tight Hose Test Water Tight One Contact Block System For Both Miniature Or Full Size Buttons Versatile Modular Snap-Lock Together
More information2/3 Port Mechanical Valve. Specifications Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Port size Mass (Basic)
2/3 Port Mechanical Valve Series 00 Large flow capacity. A variety of actuator types. Specifications Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Port size Mass (Basic)
More informationFeatures. Emergency Stop Switch A22E. Install in 22-dia. or 25-dia. Panel Cutout. Safety Lock Mechanism to Prevent Misuse.
Switch A22E Install in 22-dia. or 25-dia. Panel Cutout Direct opening mechanism to open the circuit when the contact welds. Safety lock mechanism prevents operating errors. Easy mounting and removal of
More informationLUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, Click quick-assembly feature 1-29 LUMOTAST 25 selector switch, ring nut fixing 1-29
General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp socket
More informationSection. Circuit Breakers Selection Guide...N-2. NRA Series...N-3. NRBM Series...N-13. NRC Series...
Section Selection Guide...-2 RA Series...-3 RBM Series...-3 RC Series...-20 General Instructions...-29 Internal Circuit Overview...-29 for more information on this product family visit www.idec.com/circuitbreaker
More informationClarian uk ltd SWITCHES AND CONTROLS TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC.
SWITCHES AND CONTROLS TOP-TECHNIC TOP-TECHNIC CONTROL UNITS SWITCH DISCONNECTORS & CAM SWITCHES TOP-TECHNIC TOP-TECHNIC EMERGENCY STOP MAIN SWITCHES MAIN SWITCHES TOP-TECHNIC TOP-TECHNIC CAM SWITCHES FOR
More informationHS1C Series Full Size Interlock Switch with Locking Solenoid. GS-ET-15 BG standard in Germany. HS1C Series Functionality
Full Size Interlock Switch with Locking Solenoid HSC Key features include: Rugged Aluminum Die-cast Housing With the actuator mounted on a movable door, and the switch on a machine, the door can be mechanically
More informationSOLID STATE BUZZER ABSOLUTE CONTROL
TM TEKMEC SOLID STATE BUZZER ABSOLUTE CONTROL TEKMEC TM PERFECTION C O M M I T M E N T PCMS M3111204IN (AN ISO 9001:2008 CERTIFIED COMPANY) CONTROLLING DEVICES SIGNALLING DEVICES Ø22.5MM CONTROL & SIGNALLING
More informationø8 A8 Series Miniature Control Units
A8 ø8 A8 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
More informationLighted Pushbutton Switch
Lighted Pushbutton Switch General Purpose and Micro-Voltage/Current Load Switch Requires only 22 mm mounting depth All LEDs, lamps, legends and pushbutton units replaceable without tools Oil-resistant
More informationTable of Contents LED Machine Lighting - Pg. 1 Automation & Sensing - Pg. 27 Safety - Pg. 255 Switching & Controls - Pg. 449 Index - Pg.
Automation & Sensing Selection Guide... 222 Relay... 224 EB3C Relay... 224 EB3 Safety Relay... 229 amp... 234 EB3 amp... 234 General Information... 248 www.idec.com/barriers PCs Table of Contents ED Machine
More informationRelays & Sockets. RR Series Power Relays. Part Number Selection. Key features: Sockets IDEC (4332) USA & Canada
Key features: SPDT through PDT, 0 contacts Midget power type relays vailable in pin and blade terminal styles. Options include an indicator, check button for test operations and side flange. Series Power
More informationDoor Interlock Switches
HS5B Series HS5B Series Miniature Interlock Switch HS5B features: mm x mm x 9mm Compact Housing Available with Contact Confi gurations (NO + NC or NC) Flexible Installation: By turning the head of the
More informationCommand and signalling E 250, E 259 selection table
E 250, E 259 selection table Latching relays E250 Installation relays E259 Contacts switching on each impulse sent to the control coil. Contacts maintained in switched position only while the control coil
More information3SB5 Operating Instruction Manual
perating nstructions SB5 perating nstruction Manual Warning : Hazardous Voltage can cause Electric Shock and burns. Disconnect Power before proceeding with any work on this equipment SB5 Mounting details
More informationG1/8-3/2-Way Valves - Series K9
PDE600PNUK 3/-Way Valves - Series K9 G1/8-3/-Way Valves - Series K9 Actuation: indexed spring return indexed, secured in two positons Pushbutton Cam operation Toggle cam operation Plunger operated Cam
More information