Bulletin 800MR/800MB Push Buttons
|
|
|
- Owen McDonald
- 5 years ago
- Views:
Transcription
1 Bulletin 800MR/800MB Contact Blocks Bulletin 800M contact blocks are available with quick connect type terminals and screw terminals with pressure plates (in two sizes). Each quick connect type termination will accept two x in. push-on connectors or one x in. connector. Each small screw terminal with pressure plate will accept a maximum of one #14 AWG wire or two #16 AWG wires. The large screw terminals with pressure plates are similar in size to the Bulletin 800T (full size) contact block terminals. 800M-XA 800M-XAS 800M-XAK 800M-XAR Contact Arrangement Standard Block Logic Reed Block Quick Connect Terminals Small Screw Terminals with Pressure Plates Large Screw Terminals with Pressure Plates Quick Connect Terminals 1 N.O. 800M-XD1 800M-XD1S 800M-XD1K 800M-XD1R 1 N.C. 800M-XD2 800M-XD2S 800M-XD2K 800M-XD2R 1 N.O. - 1 N.C. 800M-XA 800M-XAS 800M-XAK 800M-XAR 2 N.O. 800M-XA2 800M-XA2S 800M-XA2K 800M-XA2R 2 N.C. 800M-XA4 800M-XA4S 800M-XA4K 800M-XA4R 1 N.O.E.M. - 1 N.C.L.B. 800M-XA3 800M-XA3S 800M-XA3K 1 N.C.L.B. - 1 N.C. 800M-XA7 800M-XA7S 800M-XA7K Screw terminals with pressure plates are not available. Note:For contact block rating information see Standard Contact Ratings. Color Caps Non- Devices Flush Head Extended Head Mushroom Buttons Push-Pull Units Twist or Pull Color Flush Head Extended Head Mushroom Buttons Push-Pull Units Twist or Pull 800MR-N41 800MR-N21 800MR-N56G 800MR-N160B 800MR-N30B 800MR-N42 800MR-N22 800MR-N56B 800MR-N160H 800MR-N30H Orange 800MR-N43 800MR-N23 800MR-N56O 800MR-N160F 800MR-N30F Gray 800MR-N44 800MR-N24 800MR-N56GR 800MR-N160G White 800MR-N45 800MR-N25 800MR-N56W 800MR-N160J 800MR-N46 800MR-N26 800MR-N56R 800MR-N160A 800MR-N30A Blue 800MR-N47 800MR-N27 800MR-N56BL 800MR-N160C 800MR-N30C Yellow 800MR-N49 800MR-N29 800MR-N56Y 800MR-N160E 800MR-N30E Devices
2 Pilot Light Push-to-Test Pilot Light and Push Button Push-Pull Unit Mushroom Button Twist or Pull Color Pilot Lights Push-to-Test Pilots and Push-Pull Units Mushroom Buttons Twist or Pull 800MR-N1R 800MR-N2R 800MR-N159R 800MR-N156R 800MR-N20R 800MR-N1G 800MR-N2G 800MR-N159G 800MR-N20G Amber 800MR-N1A 800MR-N2A 800MR-N159A 800MR-N156A 800MR-N20A Blue 800MR-N1B 800MR-N2B 800MR-N159B 800MR-N156B 800MR-N20B White 800MR-N1W 800MR-N2W 800MR-N159W 800MR-N156W Clear 800MR-N1C 800MR-N2C 800MR-N159C 800MR-N156C 800MR-N20C Replacement Selector Switch Knobs Selector Knob 800MR-NG Selector Knob Lever 800MR-NK Selector Knob 800MR-LB Selector Knob Lever 800MR-LM Knobs Color Selector Switch Knobs, Non- Color Selector Switch Knobs, Standard Knob Knob Lever Standard Knob Knob Lever Gray 800M-NG 800M-NT 800M-NA 800M-NL 800M-NB 800M-NM 800M-LA 800M-LL Blue 800M-NC 800M-NN Amber 800M-LD 800M-LP Yellow 800M-NE 800M-NR Clear 800M-LY 800M-LZ Orange 800M-NF 800M-NS 800M-LB 800M-LM 800M-NH 800M-NK White 800M-NJ 800M-NV Bul. 800MB Color Chip Kits
3 Description Type of Unit Color Color Chip Kits These kits are available for replacement on backlit style devices. A packet of color chips containing one of each color is included in each kit. Full-face illuminated Amber Blue 800MS-N10A 800MS-N10B Clear 800MS-N10C 800MS-N10G 800MS-N10R Non-illuminated Blue 800MS-N12B 800MS N10 Grey Orange White Yellow 800MS-N12GR 800MS-N12G 800MS-N12O 800MS-N12R 800MS-N12W 800MS-N12Y Boots Description Insulation Boot When properly combined with a Bulletin 800MR unit, this device meets CSA grounding requirements. 800M-N18 Description Color Rubber Boot These accessories are used as dust covers. They can be added to flush and extended head push button units (illuminated and non-illuminated) to protect against foreign materials from reaching the opening between the button and the mounting ring. Blue Yellow 800MR-N8 800MR-N9 800MR-N10 800MR-N11 800MR-N12 800MR N9 Clear 800MR-N14 Miscellaneous Description Extended Mounting Ring This mounting ring protects against accidental push button operation. Cat. No. 800MR-N4 Padlocking Cover Stainless steel mounting bracket with clear plastic cover. Guards against unauthorized operation. Used with round design push buttons and selector switches (not for use with wing lever). Also available for 2-position push-pull units (button must be in the depressed position when the cover is closed). 800MR-N6 (Padlock not included)
4 Description Locking Ring Wrench This device is used to tighten and loosen mounting rings properly in the 800MR family. 800MR-N3 Hole Closing Plug Wherever an enclosure or flush plate with more than the required number of openings is used, this neat-appearing plug can be supplied to close the unused openings. 800M-N1 Lamp Remover This tool can be used to remove and install wedge based lamps in selector switches. 800M-N5 Connectors Used with wire sizes AWG The connectors come in packages of 100 pieces. 800M-NT2 Guard for This device is used to prevent accidental operation of illuminated push buttons. 800MR-N93 Mounting Ring This device is a retaining ring used to keep an operator in the panel when removing the guard ring to service the light bulb. Lens Remover This device makes it easier to remove the lens MS-N9 These must be ordered in multiples of 100. Description Style Color Additional Bezels These bezels fit square traditional and backlit styles. Grey 800MS-N16 800MS-N16 (Grey) 800MB-N16 () 800MB-N16 Flush button backlit Grey 800MS-N17 800MB-N17 Extended button backlit Grey 800MS-N18 800MB-N18 800MS N17 Description Type Legend Insert Do-It-Yourself Kits These kits contain material necessary to create transparent backlit legend inserts Legend marking start package 800MS-N13 Replacement Lamps Replacement Incandescent and Light Emitting Diode (LED) Lamps Lamp Type Lamp Voltage ANSI Number Incandescent Full Voltage and Transformer 6.3V AC M-N15 Full Voltage 12V AC/DC M-N16 24V AC/DC M-N17 Dual Input Transformer 6.3V AC 755/ T-N65 Standard LED Full Voltage 6.3V AC/DC 800T-N60x 14V AC/DC 800T-N61x 28V AC/DC 800T-N62x 120V AC 800T-N64x Full Voltage 6.3V AC/DC 800T-N60x To complete the cat. no. replace the x with the first letter of the desired color: Amber,,, White, or Blue. To complete the cat. no. replace the x with the first letter of the desired color: Amber,,, or White. All illuminated devices, except dual input transformer units, use T 1-3/4 wedge base units. Existing Bulletin 800M devices may have incandescent lamps replaced with shock and vibration resistant LEDs. Existing ANSI# 86, 73, or 85 lamps may be replaced by LEDs.
5 Copyright 2014 Rockwell Automation, Inc. All Rights Reserved.
Bulletin 800F 22.5 Mm Push Buttons
Bulletin 800F 22.5 Mm Push Buttons Miscellaneous Description Type Pkg. 800F-AHA1 30.5 mm to 22.5 mm Hole Size Adapter This adapter allows a 22.5 mm push button operator to be installed in a panel with
Contact blocks and lamp blocks with holder for front mounting Max. number of blocks Included in holder blocks Catalog No. Ref.
Pilot Devices Accessories Contact blocks and lamp blocks with holder for front mounting Max. number of blocks Included in holder blocks Catalog No. Ref. Code List Price For non-illuminated operators 3
Knob Lever Operator Cat. No. 800T-H17A 800 T HA 2 A. Protection Rating Description T Metal, Type 4/13 Plastic, Type 4/4X/13
2-Position Selector Switch Devices, Non-Illuminated Standard Knob perator Cat. No. 800T-H2 Knob Lever perator Cat. No. 800T-H17 Standard Knob perator Cat. No. 800H-HR2 800 T H 2 a b c d e a Protection
800 T FX 1 A1. Color Cap. No cap 1 Green 2 Black 3 Orange 4 Grey 5 White 6 Red 7 Blue 9 Yellow. Contact Block(s) Operator Position.
2-Position Push-Pull and Push-Pull/Twist Release Devices, Non-Illuminated Note: A jumbo or large legend plate is recommended, if space allows. 2-Position Push-Pull Cat. No. 800T-F6D4 2-Position Metal Push-Pull
Selector Push Button Cat. No. 800T-K2AAXX. a b c d e f g Right Left Right Left. d, e, f, g. Contact Blocks. No contacts on operator
NEMA Push Specifications 800T/H 30.5 mm Push s Selector Push Devices (Bul. 800T only) Selector Push Cat. No. 800T-K2AAXX 800T KD 2 G J D E a b c d e f g Right Left Right Left Blank C K KA KB KC KD KE a
PUSHBUTTON UNITS & INDICATOR LIGHTS CLASS 52 - WATERTIGHT / OILTIGHT - 30 MM HEAVY DUTY CUSTOM SELECTOR SWITCH DESIGNS
CLASS - WATERTIGHT / OILTIGHT - 30 MM HEAVY DUTY CUSTOM SELECTOR SWITCH DESIGNS Assembled Non-Illuminated Selector Switches: - Determine Contact Block and Location. - Select Block Suffix. Example: J =
C & S 22 mm NON-ILLUMINATED PUSHBUTTONS METAL BEZEL
C & S 22 mm NON-ILLUMINATED PUSHBUTTONS METAL BEZEL OPERATING HEADS, - IP65 CONTROL UNITS WITH CHROMIUM PLATED METAL BEZEL PROJECTING PUSH BUTTON BOOTED PUSH BUTTON IP66 WITH TRANSPARENT BOOT IP66 MUSHROOM
Control & Signalling Devices 22.5 mm. RoHS. Compliant
Control & Signalling Devices 22.5 mm RoHS Compliant Contents Characteristics General Characteristics Products Push Buttons, Selector Switches, Latching Mushroom Head Push Buttons, Pilot Lights & Illuminated
Series D7 Pilot Devices
Series General Description... 2 Pushbuttons Non-Illuminated... 4 Illuminated... 12 Emergency Stop Operators Non-Illuminated... 20 Three Position... 22 Twist-to-Release... 24 Keyed... 26 Illuminated...
800T/H 30 mm Push Buttons. Time-tested Durability, Industry Proven A Legacy of Leadership
800T/H 30 mm Push Buttons Time-tested Durability, Industry Proven A Legacy of Leadership Imitated, But Never Duplicated The Allen-Bradley Bulletin 800T and 800H push button product lines are in a class
Non-illuminated Push Buttons
Non-illuminated Push Buttons 3 Accessories for push buttons Lockout attachment Contact block kits Lens kits Wobblestick kit Push Button Cap Interchangeable, snap-in design Protective caps 9 colors: red,
Push Button Units and Indicator Lights
3SB3, Inscriptions, 22 mm Insert labels Push Button Units and Indicator Lights Push buttons (clear) and illuminated push buttons with a flat button can be fitted with insert labels for identification purposes,
800 T P B H 16 R. Momentary Contact Push Button Devices, Illuminated. 8 Rockwell Automation Publication 800-TD009A-EN-P
Momentary Contact Push utton Devices, Illuminated Extended Head Without Guard Cat. No. 800T-P16R Extended Head without Guard Cat. No. 800H-PR16R 800 T P H 16 R a Protection Rating T Metal, Type 4/13 H
PUSHBUTTON SWITCH / SELECTOR SWITCH / ILLUMINATED PUSHBUTTON SWITCH. For the lamps, candescent lamps and LED lamps are standardized.
PUSHUTTON SWITCH / SELECTOR SWITCH / ILLUMINATED PUSHUTTON SWITCH PSA TYPE, LPSA TYPE FEATURES 1 3 Protective construction of the PSA type is IP65 and the oil-proof which applys to wide variety of applications.
Oiltight Switches & Pilot Devices
Oiltight Emergency Stop Stations Part Numbers: Emergency Stop Stations Description Contacts Plastic Bezel Metal Bezel Ø 40mm Pushlock Turn Reset 1NO-1NC HW1X-BV411-R* HW4X-BV411-R* 2NC HW1X-BV402-R* HW4X-BV402-R*
onlinecomponents.com
SELECTIN GUIDE PUSH UTTNS ULLETIN 800, 800C, 800M ul. 800MR ul. 800MS ul. 800C ul. 800 ul. 800M ulletin 800MR 22.5 mm Push uttons Product verview ulletin 800MR/22.5 mm Push uttons 22.5 mm Mounting Hole
Harmony 9001K/SK/KX 30 mm push buttons
Introduction Harmony 00K/SK/KX 0 mm push buttons Introduction Schneider Electric s Harmony 00 0 mm push buttons, pilot lights, selector switches and mushroom head operators provide robust and reliable
Pushbuttons/Selectors/Pilot Lights AH25 General information
Pushbuttons/Selectors/Pilot Lights AH5 General information Features Oil and dust-proof construction Protection complies with IEC Standard IP65.Special seals keep out oil, water, dust, and chips. This gives
Enclosures and assembled
Enclosures and assembled stations Enclosures and assembled Stations Large plastic enclosure (Modular & Compact) This enclosure can fit both Modular and Compact operators with the unique possibility to
Style Contact Type No. Button Color Code ø40mm Mushroom 1NC YW1B-V4E01R YW1B-V4E21R. Gasket ø40 YW1L-V4E11Q0R 2NC YW1L-V4E02Q➂R 6 (12V AC/DC)
Pushlock Pull/Turn eset Style Contact Type No. Button Color Code ø40mm Mushroom NC YWB-V4E0 2NC 3NC NO-NC NO-2NC 2NO-NC YWB-V4E02 YWB-V4E03 YWB-V4E YWB-V4E2 YWB-V4E2 ed only Dimensions Panel Thickness
OMPBD7M-F3PX10 metal pushbutton, flush button, green, momentary operation with 1 NO contact.
22 mm pilot devices Pushbuttons and selector switches ompbd7 series Heavy-Duty/Oil Tight Pushbuttons Quick Installation with Tool-Less Mounting Latch Plastic Operators: NEMA 4/4X/13 and IP65/66 Rated Metal
Contact Type Operator Position Type 4/13 Type 4/4X/13. Push Pull 40 mm
30 Mm Emergency Stop Devices 2-Position Push-Pull and Release Devices, Non-Illuminated Note: A jumbo or large legend plate is recommended, if space allows. 2-Position Push-Pull Cat. No. 800T-F6D4 2-Position
Industrial Enclosures
48J Series - NEMA 2 Large JIC Enclosures Junction Boxes Application Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments. Provides a degree of protection from falling
Instruction Bulletin. Enclosed ALTISTART 46 Controller Supplemental Instruction Bulletin Class 8638 and 8639 INTRODUCTION
Instruction Bulletin Bulletin No. 0006-39-03 May 997 Raleigh, NC, USA Enclosed ALTISTART 6 Controller Supplemental Instruction Bulletin Class 8638 and 8639 INTRODUCTION This bulletin is a supplement to
Pilot Devices, Compact Range
Pilot Devices, Compact Range The competitive choice The compact range is a new competitive choice for OEM customers and Panel Builders with high requirements of cost ef cient, easy to use and reliable
ACTUATOR ASSEMBLIES FOR PANEL MOUNT APPLICATIONS
Z A H LO C ACTUATOR ASSEMBLIES FOR PANEL MOUNT APPLICATIONS BASIC CATALOG NUMBERS HKHPBMMSS1 HKHPBMMTC1 HKHPBILLMM1 HKHPBMMMR1 HKHPBMMMB1 HKHPBMMMG1 HKHDBLPBMMGR1 HKHPBPMTMR1 HKHPBPMTMB1 HKHPBPMTMG1 HKHPBTMTMR1
Oiltight Switches & Pilot Devices
Oiltight Switches & Pilot Devices HW Series 22mm IEC Style Global Pushbuttons Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Key features include: Locking
CRASH LOCATOR DATABASE UTAH CURRENT AS OF 01 FEBRUARY 2010
37 03N 112 31W March 26, 1981 PA-28 N47865 White, Red, Orange; near Alton, UT 37 03N 113 49W February 19, 1960 T Pacer N1742P 37 05N 110 54W September 17, 1984 N1939N White, Yellow, Orange, Partial Brnd??
ø22mm HW Series Control Units Control Units
mm HW Series Control Units Control Units HW Series Control Units (Selection Guide) Function Emergency Stop Switch (Unibody Type) Emergency Stop Switch (Separate Type) Pushlock Turn eset Category ø40mm
Cable-Operated Disconnect Switches. Accessories
Cable-Operated Disconnect Switches Accessories Description For Use With Auxiliary Contacts 1 N.O. Contact 1494C, 1494F, 1494V, and 1494G ( 1495-N8 1 N.O. Contact (low-level switching) A) Disconnect Switches
Push buttons at a glance
104P Push Buttons Push buttons at a glance Contents The inside story....................... 1 Hot buttons........................... 2 Non-illuminated push buttons........... 3 Illuminated push buttons...............
PUSHBUTTONS SELECTOR SWITCHES CONTROL & INDICATING DEVICES. Top Quality Engineered for Maximum Performance
SELECTOR SWITCHES CONTROL & INDICATING DEVICES Heavy Duty Oil Tight Dust Tight Hose Test Water Tight One Contact Block System For Both Miniature Or Full Size Buttons Versatile Modular Snap-Lock Together
Contacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Low energy contacts gold plated. Minimum PUSHBUTTON
Pilot Devices Technical data UL General UL technical data Contact blocks Rated insulation voltage, UL 600V Rated thermal current 10A / 600VAC 2.5A / 600VDC Minimum rating 24VDC, 5mA Mechanical life (millions
Plastic enclosures compact Of polycarbonate. Degree of protection: IP 66, 67, 69K UL type1, 3R, 4, 4X, 12, 13
Pilot devices, 22 mm Assembled stations and enclosures Assembled stations There are assembled stations of two types: In plastic enclosures and in metallic enclosures Both types of enclosures are available
CRASH LOCATOR DATABASE NEW MEXICO CURRENT AS OF 01 FEBRUARY 2010
31 15N 107 16W February 13, 1993 Piper 28 N2187R Red/White 31 24N 108 38W January 16, 1983 Piper Cherokee Unknown White and 16E Cloverdale,NM 31 47N 107 11W February 26, 1971 Piper 28 N7926N Yellow/Black/White
Pilot devices. General construction
Modular range 30mm Modular Range, 30mm Pilot devices General construction Snap-on features reduce installation time Bezels: black plastic or chrome metal Contact block holder features rear mounting with
SOLID STATE BUZZER ABSOLUTE CONTROL
TM TEKMEC SOLID STATE BUZZER ABSOLUTE CONTROL TEKMEC TM PERFECTION C O M M I T M E N T PCMS M3111204IN (AN ISO 9001:2008 CERTIFIED COMPANY) CONTROLLING DEVICES SIGNALLING DEVICES Ø22.5MM CONTROL & SIGNALLING
Push Buttons 800 E-Stops! Specifications 22.5mm
! Specifications 22.5mm Front of Panel (Operators) Mechanical Ratings Description (800EP/ES) (800EM/EB) Vibration (assembled to panel) 10 to 2000Hz, 1.52mm displacement (peak-to-peak) max./10g max. Shock
L-Series Sealed Rocker Switches
L-Series Sealed Rocker Switches L-Series Sealed Rocker Switches Making the right connections has never been easier with the L-Series Rocker Switch from Carling Technologies. Not only does this innovative
Pilot devices, 22 mm. Catalogue. 1SFC151001C0201, Edition 2, January 2006 Superseedes Catalogue 1SFC15100C0201 of December SFC151169F0001
Catalogue Pilot devices, 22 mm 1SFC151001C0201, Edition 2, January 2006 Superseedes Catalogue 1SFC15100C0201 of December 2004 1SFC151169F0001 ABB A sure hit in Pilot Devices Part of comprehensive ABB program
4XDOLW\ &RPPLWPHQW.
www.tier1automation.com Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced
800 T FX 1 A1. Color Cap. No cap 1 Green 2 Black 3 Orange 4 Grey 5 White 6 Red 7 Blue 9 Yellow. Contact Block(s) Operator Position.
NEM Push utton Specifications 800T/H 30.5 mm Push uttons 2-Position Push-Pull and Push-Pull/Twist Release Devices, Non-Illuminated Note: jumbo or large legend plate is recommended, if space allows. 2-Position
ø22mm HW Series Control Units
TREICHL-ATM Electronic Auf der Bült 10-12 D 41189 Mönchengladbach Tel. 02166 958545 Fax 02166 958547 email: atm@treichl.de internet: mm HW Series Control Units HW Series Control Units (Selection Guide)
Pushbuttons & Indicating Lights Pushbutton Control Stations Assembled Renewal Parts H Series, Renewal Parts
-26 Pushbutton Control Stations Assembled 0250H Series, Renewal s Renewal s Figure -4. Type N Renewal s Table -27. Assembled Stations Type N Renewal s Item Type N Square Buttons Cover 2 Element Single
Pilot devices. General construction
Modular range Pilot Devices Pilot devices General construction Snap-on features reduce installation time Bezels: black plastic or chrome metal Contact block holder features rear mounting with quick-release
30mm Hazardous Location Switches:
30mm Hazardous Location Switches: EU2B Series PRODUCT DESCRIPTION Complying with UL and ATEX Directives for hazardous environments, new 30mm EU2B Hazardous Location Switches provide increased safety for
3.2. Pushbuttons. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents
. Pushbuttons Product Description Eaton offers a wide range of pushbutton switches for standard industry applications such as appliances, electronics, medical and test instrumentation, office equipment
Assembled stations and enclosures
Assembled stations and enclosures Pilot Devices Features Available for 1, 2, 3, 4 & 6 operators. Base mounted contacts allow for easy removal of operator cover. Wiring remains with base. Up to 5 contact
Bulletin 800A 16 mm Push Buttons Product Overview
Product verview Bulletin 800A 16mm Push Buttons IE style 16 mm mounting hole IP65 NEMA Type 13 Internationally rated operators Table of ontents See below. Table of ontents Page Page Specifications... 34
Allen-Bradley 800T-FXD16RA1
NEM Push utton Specifications 800T/H 30.5 mm Push uttons 2-Position Push-Pull and Push-Pull/Twist Release Devices, Illuminated Note: jumbo or large legend plate is recommended, if space allows. Illuminated
Pushbuttons/Selectors/Pilot Lights/Buzzers AR22 and DR22 General information
General information The AR22 now uses a release arm with a wedge mechanism developed by Fuji Electric FA. This enables you to mount or remove the operator and contact block without using any tools. When
Time-Tested Durability, Industry Proven A Legacy of Leadership mm 800T/H. 6 /
Time-Tested Durability, Industry Proven A Legacy of Leadership 30.5 mm 800T/H 6 / 2011 IMITATED, BUT NEVER DUPLICATED The Allen-Bradley Bulletin 800T and 800H push button product lines are in a class by
Breakdown of Materials HSW Depot 2017
Miscellaneous Organic Chemicals 16% Electronics 11% Oil 9% Breakdown of Materials HSW Depot 2017 Aerosols 4% Propane Tanks 3% Pesticides 2% Fluorescent Lamps 2% Dry Cell Batteries 2% Car Batteries 1% Antifreeze
Universal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION:
SECTION 6 Universal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION: 78 Application: IDEM Universal Gate Boxes (UGB-KLT) provide high level RFID coded interlocking and machine control
A V I A T I O N C I V I L E
GROUPEMENT POUR LA SECURITE A V I A T I O N C I V I L E BR 2002/07(AB) DGAC BULLETIN DE RECOMMANDATION Edité par : DGAC FRANCE Le : 23 JANVIER 2002 TITRE : MOTEURS UTILISES AVEC DU CARBURANT CONTAMINE
30mm Hazardous Location Switches:
30mm Hazardous Location Switches: EU2B Series PRODUCT DESCRIPTION Complying with UL and ATEX Directives for hazardous environments, new 30mm EU2B Hazardous Location Switches provide increased safety for
22mm Push Buttons and Switches
PUSH UTTONS/SWITCHES 22mm Push uttons and Switches Emergency Stops Selector Switches Lever Type Small Head 71.4 2 positions Large Head 3 positions unit: mm S2ER E3 R A D Size CONTACT LOCK * S2SR S 3 R
22MM IEC PILOT DEVICES
HUMAN MACHINE INTERFACE MM IEC PILOT DEVICES c3controls offers the best selection of illuminated and non-illuminated push buttons and selector switches on the market today. We also have a full line of
General_technical_data Series
Indicator actuator 2 500 Hz: 5 g Pushbutton actuator Lens flat/level with front bezel: - Momentary max. 3 600/h - Maintain max. 1 800/h Lens flat/raised above front ring: - Momentary max. 3 600/h - Maintain
Push buttons. Increased safety - Group IIC XBW series TECHNICAL DATA. Our wide HarmAtex range of push buttons and emergency stops combines
Push buttons Increased safety - Group IIC XBW series Our wide HarmAtex range of push buttons and emergency stops combines They equip enclosures or control panels intended for explosive atmospheres gas/vapours
LUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, Click quick-assembly feature 1-29 LUMOTAST 25 selector switch, ring nut fixing 1-29
General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp socket
Bulletin 1494D Fixed-Depth Flange-Mounted Circuit Breakers
Bulletin 1494D Fixed-Depth Flange-Mounted Circuit Breakers Bulletin 1494D Fixed Depth Flange Mounted Circuit Breaker Operating Mechanism Industrial rated circuit breaker operating mechansim pre-assembled
Micro Switch. NR SERIES ROCKER SWITCH 3-POSITION FLUSH-PANEL MOUNT, SCREW TERMINALS 1NR * Off 2-3* $24.58
Micro SEALED TOGGLE AND ROCKER SWITCHES A sealed switching chamber enables these toggle and rocker switches to comply with UL 508, paragraph 13.3 hosedown test. These switches survive where panels are
Stations & enclosures
Assembled stations & enclosures Assembled enclosures Features Available for 1, 2, 3, 4 & 6 operators. Base mounted contacts allow for easy removal of operator cover. Wiring remains with base. Up to 5 contact
Certifications UL Listed (File No. E 14841, Guide NLRV; File No. E 47426, Guide WHTY) CSA Certified (File No. LR1234) CE
Bulletin R Overview Bulletin R Next Generation Global Fused and Non-Fused Disconnects 0 A A Sizes Fused Switch Versions: - BS - DIN - CSA HRCII-C - CSA HRCI-MISC - UL Class J - UL Class CC - NFC Non-Fused
Contacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Wire size
Technical data UL Pilot Devices General UL technical data Contact blocks Rated insulation voltage, UL 600V Rated thermal current 10A / 600VAC 2.5A / 600VDC Minimum rating 24VDC, 5mA Mechanical life (millions
Bulletin 505 Full Voltage Reversing
Bulletin 505 Full Voltage Reversing Contactor Accessories Bulletin 500DC Electronic DC Coil Controller Compact size NEMA sizes 0 3 Versatility Fully assembled unit or as a retro fit kit Features LED status
Universal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION:
SECTION 6 Universal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION: 70 Application: IDEM Universal Gate Boxes (UGB-KLT) provide high level RFID coded interlocking and machine control
UL Enclosed Disconnect Switches (Fused and Non-Fused)
Product Selection UL Enclosed Disconnect Switches (Fused and Non-Fused) Catalog Number Explanation 194R-K Non-Metallic Enclosure UL Type 3/4/4X, IP66 194R-F Painted Steel Enclosure UL Type 3/4/12, IP66
ø10 A1 Series Miniature Control Units
A1 ø10 A1 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
HKH Series. HAZCON Controls for Harsh and Hazardous Environments
HKH Series HAZCON Controls for Harsh and Hazardous Environments Z A H LO C NON-METALLIC DIN RAIL MOUNT Component Mounting Rail Optional Customer I.D. Nameplate Optional Legend Plate Explosion Protective
Oiltight Switches & Pilot Devices
mm - Series Transfomer Contact Assemblies For use with Illuminated Pushbuttons. Style Contacts Part Number 12V AC with LED 24V AC with LED 48V AC with LED 12V AC with Incandescent 24V AC with Incandescent
KFD / KFT / KFR Series
Incandescent Annunciator Lights KF / KFT / KFR Series KF-27F 27H 27V KF-37F 37H 37V KF-50F 50H Features Available in a variety of lighting panel sizes. 12 indicators (8 flat and 4 diagonal models) ranging
HW Series 22mm IEC Style Global Pushbuttons
ømm - HW Series Blocks Signaling Lights Key features: Locking lever removable contact blocks Finger-safe IP contacts as standard, other terminal styles available Tamperproof construction All E-stops meet
ø12 A2 Series Miniature Control Units
ø2 A2 Series Miniature Control Short 22-mm-long body miniature control unit series with bright LED illumination face and snap-action switching. Degree of protection: IP40 and IP5 (IEC 0529) All series
Pushbuttons B3. Options and ordering codes. Exploded view. BS 3. Green
Pushbuttons 3 IP65 protection Opaque or illuminated Metal or lack bezels Snap-on contact blocks Colour coded contacts Pushbutton stations International approvals including UL and CS Options and ordering
Control Buttons Series 8082
www.stahl.de > Contact element with 1 NO contact 1 NC contact, positive opening > Contact material silver-nickel or gold-plated > 9 different actuators Push Mushroom push Selector switch Rotary actuator
IEC Load Switches Bulletin 194E 25 Amps to 100 Amps
Description load switches are designed for use as local motor isolation and IEC disconnect switch applications outside North America. Available with 3- and 6-pole versions with add-on additional poles,
LINE - HIDE. Lineset Cover System PROTECT & BEAUTIFY. A complete system for completing the job
L Lineset PROTECT & BEAUTIFY A complete system for completing the job L Lineset PRODUCT INFORMATION & SPECIFICATIONS Dimensions (in inches) Weight Product A B C D E (ounces) Split Line Tube (PVC) CD-60
Bulletin 109 IEC Non-Reversing Starters. Product Overview/Product Selection. Table of Contents
Bulletin IEC Non-Reversing Starters Product Overview/Product Selection Cat. No. -CABAF--R-P IP (Type ) Metal Enclosure with Lift-off Cover Bulletin IEC Non-Reversing Starters Impact-resistant molded enclosures
ø8 A8 Series Miniature Control Units
A8 ø8 A8 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
Table of Contents. 22mm Push Buttons. 30mm Metal Push Buttons. 22mm Plastic Enclosures, Control Boxes & Installation Instructions 30-35
Altech Corporation Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
Bulletin 1494F Fixed-Depth Flange-Mounted Disconnect Switches. Selection Guide
F Fixed-Depth Flange-Mounted Disconnect Switches Selection Guide F Fixed-Depth Flange-Mounted Disconnect Switches Product Cat. No. 1494F-N Disconnect Switch with Cat. No. 1494F-F Fuse Block Adapter Plate
ILLUSTRATED PARTS LIST
CW300 WITH 265cc SUBARU ENGINE 800-643-7332 amsportworks.com NOTE: Some part numbers vary by serial number. The serial number is located on a brass tag beneath the dump bed on the driver side. 265cc 2
2.4 Dual Motion Safety Switch /8007 EURO SR /8005 Euro Full Size /8065 ESPORT
Rockers NGR. Introduction Product Selection Guide..................................... NGR Product Description....................................... Number Selection..................................
GE Push Buttons. C-2000 Push Buttons. Push-to-Test Pilot Lights. Selection Process
Push-to-Test Pilot Lights Selection Process 600 Volts Max. AC/300 Volts Max. DC 10 Amps. Continuous AC/2.5 Amps. Continuous 600 Volts Max. AC/300 Volts Max. DC 10 Amps. Continuous AC/2.5 Amps. Continuous
HMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch
Edition 10/2016 HMI Components Series Characteristics The compact Series is especially suited for: Flush design The large rectangular design (24x36mm) features a large illuminated area. Functions The Series
Pushbuttons/Selectors/Pilot Lights/Buzzers AR30 and DR30 General information
Pushbuttons/electors/Pilot ights/buzzers AR and DR General information The full range of the contact blocks and transformer units suitable for the AR22 and DR22 series may also be fitted to the AR and
Pushbuttons/Selectors/Pilot Lights/Buzzers AR30 and DR30 General information
Pushbuttons/electors/Pilot Lights/Buzzers AR and DR General information The full range of the contact blocks and transformer units suitable for the AR22 and DR22 series may also be fitted to the AR and
PUSHBUTTON SWITCH / SELECTOR SWITCH / ILLUMINATED PUSHBUTTON SWITCH HSA TYPE, LHSA TYPE
PUSHUTTON SWITCH / SEECTOR SWITCH / IUMINATED PUSHUTTON SWITCH HSA TYPE, HSA TYPE FEATURES Protective construction of the HSA type is IP65 and the oil-proof, which applys to wide variety of 1 applications.
A22/M22. Specifications. Specifications Common to All. Complete Assemblies
Complete Assemblies Specifications Common to All A22/M22 The Following Pages Provide Information Common To Each Model of The A22/M22 Pushbutton Switch H A22 H A22S/W H A22K H M22 Specifications J APPROVED
600V, Non-Fusible, (3-Pole, 3 Phase)
0V, Non-Fusible, (3-Pole, 3 Phase) ulletin 1494G/1494GX1494GY Non Fusible 0 A switch ratings 0V: 3-pole, 3-phase and 6-pole, 3-phase versions versions only Type 3R/4/12 (painted metal), Type 4/4X (stainless
New Oak Collection. Crafted from North American White Oak, New Oak has a contemporary feel that blends style with traditional construction
Bedroom, Dining, Occasional & Office Crafted from North merican White Oak, has a contemporary feel that blends style with traditional construction Dining Dining NT01 Small D End Extending Table W 915mm
A22E. Model Number Structure. Emergency Stop Switch. Model Number Legend. Completely Assembled. Install in 22-dia. or 25-dia.
Switch Install in 22-dia. or 25-dia. Panel Cutout Direct opening mechanism to open the circuit when the contact fuses. Safety lock mechanism prevents operating errors. Easy mounting and removal of Switch
Cable length. 3: 3 m. 4: Adjustable mounting (vertical) 4: 3NC (slow action) 5: 5 m. (Slow-action) Horizontal 1 m D4GS-N1R D4GS-N2R D4GS-N3R D4GS-N4R
Slim Safety-Door Switch Industry s Smallest Safety-Door Switch (with 3 Contacts) for Use in Space-Confined Areas Slim body design (85 x 30 x 17 mm) suitable for small door applications 2-contact and 3-contact
ILLUSTRATED PARTS LIST
LM300 WITH 265cc SUBARU ENGINE 800-643-7332 amsportworks.com NOTE: Some part numbers vary by serial number. The serial number is located on a brass tag beneath the dump bed on the driver side. 265cc 2
Switches & Pilot Devices
ømm - HW Series Key features: Locking lever removable contact blocks Finger-safe IP contacts Tamperproof construction All E-stops meet EN6947-5-5, and are compliant with SEMI S standards Worldwide approvals
ILLUSTRATED PARTS LIST
BD300 WITH 277cc KOHLER ENGINE 00-643-7332 amsportworks.com NOTE: Some part numbers vary by serial number. The serial number is located on a brass tag beneath the dump bed on the driver side. 277cc 2 WHEEL
XW Series E-Stops. Safety. Selection Guide ø22mm XW E-Stops
Safety Selection Guide... 288 ø22mm XW E-Stops... 289 www.idec.com/usa/estop XW Series E-Stops Overview Interlock Switches Enabling Switches Safety Control ight Curtains AS-Interface Safety at Work Table
XW Series E-Stops. Safety. ø22mm XW E-Stops Phone: Fax: Web: -
Safety ø22mm XW E-Stops... 277 XW Series E-Stops Overview Interlock Switches Enabling Switches Safety Control ight Curtains AS-Interface Safety at Work Phone: 8.894.412 - Fax: 888.723.4773 - Web: www.clrwtr.com