L-Series Sealed Rocker Switches

Size: px
Start display at page:

Download "L-Series Sealed Rocker Switches"

Transcription

1 L-Series Sealed Rocker Switches L-Series Sealed Rocker Switches Making the right connections has never been easier with the L-Series Rocker Switch from Carling Technologies. Not only does this innovative switch offer total design flexibility, it has set new standards for both performance and reliability. It s I certified, and able to withstand temperatures from -0 C to + C. Features include countless switch and lamp circuit combinations, LED illuminated lenses or laser etched rockers, as well as hundreds of legend choices and several accessories. Eliminates need for retooling Neatly proportioned, our L- Series fits into industry standard mounting holes of. x. and.0mm x.0mm. Integrates easily into your system You can choose from a variety of termination options, including.0 TAB QC &. TAB QC. Withstands extreme temperatures Roller pin mechanism eliminates need for lubricants, so it can withstand from - 0 C to + C. Ensures greater shock protection Welded lamp connection and one-piece internal, jumperless terminal withstand extreme shock and vibration. Maximizes your design flexibility Twelve terminals offer you an extensive range of switch and lamp circuit options, including LED or incandescent illumination. 0

2 L-Series Sealed Rocker Switches Electrical Contact VDC (MAX) resistive amps, VAC 0 amps, 0 VAC 0 amps, - VDC amps, - VDC Dielectric Strength Volts RMS between pole to pole 0 Volts RMS between live parts and accessible surfaces Insulation Resistance... 0 Megohms Initial Contact Resistance. 0 milliohms VDC Life ,000 cycles maintained, 0,000 cycles momentary at rated voltage and current Contacts /0 silver-nickel, silver tin-oxide, gold Terminals Brass or copper/silver plate / (.mm) & / (.mm) Quick Connect terminations standard. Mechanical Endurance ,000 cycles minimum hysical Lighted Seals Base Incandescent - rated 0,000 hours LED - rated 00,000 hours / life (LED is internally ballasted for voltages to VDC) Rocker, base & bracket are sealed. olyester blend rated to C with a flammability rating of 9VO. Actuator Nylon Reinforced, rated to 0 C (modular lens). Locking rocker, standard rocker & paddle. Laser etching with a polycarbonate actuator. Lens olycarbonate rated at 00 C. Front snap-in. Connector Nylon rated at C. olarized. Actuator Travel (Angular Displacement) position positions from center Environmental Environmental I, representing an index of protection as applied to electrical equipment in accordance with IEC 9, BS 90, DIN 00 0 & NFC Corrosion Resistance... MFG Class III per ASTM B- & B-, Method H, with years exposure. Operating Temperature C to + C Vibration er Mil-Std 0F, Method 0D Test Condition A 0.0 DA or 0G s 0-00 Hz. Tested with VCH connector. Test criteria - No loss of circuit during test and pre and post test contact resistance. Vibration Resonance search -0 Hz 0.0 DA ±0 G s peak Results Horizontal Axis - G s max. Random Hz 0.0 SD-Gsq/Hz 0 Hz Hz Hz Hz 0.0 No loss of circuit during test; <0µ chatter. Shock er Mil-Std 0F, Method B, Test Condition 0G s. Tested with VCH connector. Test criteria - No loss of circuit during test, pre, and post test contact resistance. Salt Spray er Mil-Std 0F, Method 0D, Test Condition A, Hrs. Thermal Shock er Mil-Std 0F, Method 0F, Test Condition A, - C to C. Test criteria - pre and post test contact resistance. Moisture Resistance.... er Mil-Std 0F, Method 0F, Test Criteria - pre and post test contact resistance. Mounting Specifications. [.0]. [.0] TEST CUT HOLE IN ACTUAL MATERIAL MOUNTING HOLE anel Thickness Range Acceptable anel Thickness.00 to. (.mm to.9mm) Recommended:.00,.0,.09,. and.

3 L Series Carling Circuit L-Series Sealed Rocker Switches E C H N - A A - Rating Termination Illumination Lamp Lamp Bracket 9 Actuator 0 Lens Style & Color Lens Style & Color Legend Legend Orientation Actuator Lens Legend SERIES L CIRCUIT Terminal Orientation osition: S D &, & Connected Terminals &, & ON NONE OFF (ON) NONE OFF ON NONE (OFF) ON NONE ON ON NONE (ON) ON OFF ON ON OFF (ON) (ON) OFF (ON) CIRCUITS WITH JUMER TERMINALS 0 (,&),(,&) OFF, OFF (,&),(,&),&,&,& ROGRESSIVE CIRCUITS & & & & & OFF (&) & & (&) & OFF (&) & (&) (&) & (OFF) & & (OFF) & & & &,& &,& &,& &,& &,& OFF, OFF (&),(&) &,& &,& (&),(&) &,& OFF,OFF (&),(&) &,& (&),(&) (&),(&) &,& (OFF),(OFF) &,& &,& (OFF),(OFF) &,& &,OFF OFF,OFF 9 &,,& &,OFF OFF,OFF 0 (&),(&) &,& (&),(&) (&),(&) &,& &,& &,& &,& &,& (&),(&) &,OFF OFF,OFF 0 &,& &,OFF OFF,& HAZARD WARNING CIRCUITS A,&, & NONE OFF,& A,&, & NONE OFF,& VDC Resistive 0A 0VAC / H, A VAC / H, No Listings B A V C 0A V ( ) - momentary S - single pole - uses terminals, &. D - double pole uses terminals, &. Terminals 9, 0, & for lamp circuit only. D 0A V E A V G 0A V H 0A V TERMINATION,,.0 (.mm) TAB (QC). (.mm) TAB (QC) ILLUMINATION Lamp #:above terminals 9 & 0 end of switch.; Lamp # above terminals & end of switch. ositive (+) and negative (-) symbols apply to LED lamps only. Lamps Illumination Type Lamp wired to Terminals S None A # Independent B # Independent + - C # Independent &# Independent + 9- D # Dependent + 9- E # Independent &# Dependent + 9- F # Independent &# Dependent + 9- G # Dependent + 9- &# Independent H # Both Independent &# (in series) # Hazard # Hazard , LAM (same coding for both selections) Selection : above terminals 0 & 9; Selection : above terminals & No lamp 0 Incandescent V V V V V LED * Red Amber Green VDC A L F VDC B M G VDC C N H VDC D J * Consult factory for daylight bright, blue/green and white LED options. Typical current draw for LED is 0ma. BRACKET COLOR Black White Gray Red Standard Bracket Rockerguard at Lamp A B C D Rockerguard at Lamp E F G H 9 ACTUATOR STYLE AND COLOR Black White Gray Red Laser Etched Rocker A B C D addle J N K M 0 & LENS STYLE AND COLOR Lens color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. 0 - No Actuator Z - No Lens Clear White Amber Green Red Blue - B G M T Large Transparent - C H N U Large Translucent - D J V Bar Transparent - 9 E K R W Bar Transparent A Laser Etch background color LASER ETCH, LENS OR BODY LEGEND 00 No legend this location / no actuator For legend options & codes, see page 9 of this catalog. LEGEND ORIENTATION 0 No legend (used with codes - in selection ) Orientation - vertical, lamp on top Orientation - horizontal, lamp on right Orientation - vertical, lamp on bottom Orientation - vertical, lamp on left AA- NOTES: Consult factory to verify horsepower rating for your particular circuit choice. Custom colors are available. Consult factory. Circuits 0,,, 9 when used in combination with termination codes and are not available with rating codes, C, D, G or H. Termination only available with rating codes, B, and E. Termination not available with rating code. Not available with circuits -, - and 9. AA- ACTUATOR LENS LEGEND 00 No legend this location / no actuator For legend options & codes, see page 9 of this catalog.

4 L Series Circuit L-Series Sealed Locking Rocker Switches D S W C J - M H 00 Rating Termination Illumination Lock Lamp Bracket 9 Actuator 0 Lens Lock Legend Legend Orientation SERIES L CIRCUIT Terminal Orientation ( ) - momentary S - single pole - uses terminals, &. D - double pole uses terminals, &. Terminals 9, 0, & for lamp circuit only. LAM Above terminals & No lamp 0 Incandescent V V V V V LED * Red Amber Green VDC A L F VDC B M G VDC C N H VDC D J * Consult factory for daylight bright, blue/green and white LED options. Typical current draw for LED is 0ma. osition: (lock location) S D &, & Connected Terminals &, & ON NONE OFF ON NONE ON ON OFF ON ON OFF (ON) (ON) OFF (ON) CIRCUITS WITH JUMER TERMINALS 0 (,&),(,&) OFF, OFF (,&),(,&),&,&,& ROGRESSIVE CIRCUITS & & & & & OFF (&) & & (&) & OFF (&) & (&) (&) & (OFF) & & (OFF) & & & &,& &,& &,& &,& &,& OFF, OFF (&),(&) &,& &,& (&),(&) &,& OFF,OFF (&),(&) &,& (&),(&) (&),(&) &,& (OFF),(OFF) &,& &,& (OFF),(OFF) &,& &,OFF OFF,OFF 9 &,,& &,OFF OFF,OFF 0 (&),(&) &,& (&),(&) (&),(&) &,& &,& &,& &,& &,& (&),(&) &,OFF OFF,OFF 0 &,& &,OFF OFF,& VDC Resistive 0A 0VAC / H, A VAC / H, No Listings B A V C 0A V D 0A V E A V G 0A V H 0A V TERMINATION,.0 (.mm) TAB (QC). (.mm) TAB (QC) ILLUMINATION Lamp located above terminals &, position end of switch. ositive (+) and negative (-) symbols apply to LED lamps only. Lamps Illumination Type Lamp wired to Terminals S None B # Independent + - BRACKET COLOR Black J 9 ACTUATOR STYLE AND COLOR Black Red Locking Rocker R 0 LENS STYLE AND COLOR Lens color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. 0 - No Actuator Z - No Lens Clear White Amber Green Red Blue - B G M T Large Transparent - C H N U Large Translucent - D J V Bar Transparent - 9 E K R W Bar Transparent FUNCTION AND COLOR Locking osition Up Down Up & Down Center Lock Color A H R Match Actuator B J S black C K T white D L V red E M W safety orange LASER ETCH, LENS OR BODY LEGEND 00 No legend this location / no actuator For legend options & codes, see page 9 of this catalog. LEGEND ORIENTATION 0 No legend (used with codes - in selection ) Orientation - vertical, lamp on bottom Orientation - horizontal, lamp on left Orientation - vertical, lamp on top Orientation - vertical, lamp on right ZAY- ZAY- ORIENTATION ORIENTATION OF ACTUATOR/LENS IN ANEL ORIENTATION ORIENTATION W Lock above terminals 0 & 9. NOTES: Consult factory to verify horsepower rating for your particular circuit choice. Custom colors are available. Consult factory. Additional lamp circuits available. Consult factory. Available only with position circuits. Termination not available with rating. Termination only available with ratings, B and E. Circuits 0,, and 9, when used in combination with termination codes is not available with rating codes, C, D, G or H. Up, Up & Down, and Center lock options will be available Q00.

5 Dimensional Specifications SHOWN WITH LASER ETCHED ACTUATOR L-Series Dimensional Specifications & Accessories SHOWN WITH ROCKER GUARD.90 [0.0].00 [.9].00 [0.]. [0.].0 [.]. [.] SHOWN WITH LARGE LENS AND ADDLE ACTUATOR.90 [0.0] SHOWN WITH BAR LENS, AND CONNECTOR.00 [.9].00 [0.]. [.] 0.0 [0.] 0 Connector Hole lug CONNECTOR LC-0 BLACK.0 TAB CONNECTOR LC-0 BLACK. TAB CONNECTOR.90 [0.0] HOLE LUG LH REMOVABLE HOLE LUG WITH NON-SERRATED WINGS LH HOLE LUG WITH SERRATED WINGS.00 [.9].00 [.0].90 [.]. [.].00 [.].0 [.].90 [0.0]. [.]

6 L-Series Accessories Mounting anel Dimensional Specifications: in. [mm] [.00] [.] R.09 MAX TY R.09 MAX TY MOUNTING ANEL TEST CUT HOLE IN ACTUAL MATERIAL [.] TEST CUT HOLE IN ACTUAL MATERIAL [.] FOR ADDITIONAL UNITS, ADD.0 [.] ER UNIT. FOR MORE THAN L-SERIES SWITCHES, ADD MIDDLE SECTION. AVAILABLE IN ANEL THICKNESSES LISTED BELOW. CONSULT FACTORY DIMENSIONS: LME.0 [.mm] LUS NUMBER OF CENTER BEZELS (LMM) X.0 [.mm] LMS MOUNTING ANEL HOLE MOUNTING ANEL OENING () UNITS MOUNTING ANEL THICKNESS.0 [.].09 [.]. [.]. [.9].00 [.].00 [.].990 [0.].00 [.]. [0.].00 [.].0 [.0] LME MOUNTING ANEL END LMM MOUNTING ANEL MIDDLE LMS MOUNTING ANEL.00 [.].00 [.].00 [.].0 [.0].00 [.].00 [.].00 [.] LM MOUNTING ANEL ANEL OENING SIZE:.90 X.0 [.mm X.mm].0 [.] LM MOUNTING ANEL ANEL OENING SIZE:.90 X.09 [.mm X 0.9mm].0 [.0].00 [.].00 [.].90 [.] LM MOUNTING ANEL ANEL OENING SIZE:.90 X. [.mm X.mm]

7 L-Series Switch Circuit Diagrams CIRCUIT CIRCUIT CIRCUIT 0

8 L-Series Switch Circuit Diagrams CIRCUIT CIRCUIT 0 A INTERNAL CONNECTION A INTERNAL CONNECTION 9 0

9 L-Series Switch Lamp Circuit Diagrams ILLUM. A B + C D LEGEND + SYMBOL DEFINITION TERMINAL LOCATION E LAM LOCATION LAM LOCATION MAINTAINED CIRCUIT MOMENTARY CIRCUIT OSITION CONNECTION F + 0 OSITION + G OSITION + 0 H INTERNAL CONNECTION INTERNAL CONNECTION + 0

10 Standard Sealed Rocker Switch Markings SYMBOL LEGEND NAME (SYMBOL MEANING) LEGEND LEGEND LEGEND LENS LENS BODY SYMBOL NAME BODY NEGATIVE OSITIVE (SYMBOL MEANING) NEGATIVE OSITIVE RUNNING LIGHTS (UNDER OWER) AA NA MA ANCHOR LIGHT LIGHT AB NB MB ANCHOR 9 0 MASTER LIGHT SWITCH AC NC MC WATER FLUSHING TA FOR OUTBOARDS HORN AD ND MD HIGH BEAM ROULSION SYSTEM TRIM TRIMMING OERATION AE NE ME LOW / DIED BEAM VENTILATION FAN OR BLOWER AF NF MF SIDE MARKER LIGHT DG 9 DF WINDSHIELD WASHER AG NG MG INTERIOR LIGHT 0 WINDSHIELD WIER AH NH MH WORK LIGHT BILGE UM AJ NJ MJ WORK LAM BILGE BLOWER AK NK MK LOADING FLOOR LAM CW 9 CY OTABLE WATER RESSURE AL NL ML ON -WIER- INT DELAY 0 ENGINE START AM ED MM ROTARY BEACON ENGINE STO AN EE MN LAM TEST DK DL DRIVE TILT TILT OERATION 0 WINDSHIELD WIER/WASHER EMERGENCY START HAZARD WARNING 9 0 U/DOWN LIFT WARM AIR BLOWER TRIM TAB TRIMMING OERATION R HORN REAR AX Y NOTE Negative lens not available on L or LD-Series. Additional Standard Markings available. Consult factory. 9

11 Mouser Electronics Authorized Distributor Click to View ricing, Inventory, Delivery & Lifecycle Information: Carling Technologies: LDS00-AZZ LDS00-AZZ LDS00-AZZ LDS00-AZZ LS00- AZZ LDA0-AMZ LDEHN-A LDEHN-A LDEHN-A LDEHN-A LDS00-AZZ LC-0 LM-0

W-Series. Switch. Fully sealed and submersible IP68 protection including below the panel Tri-seal design Connector with twin locking tabs

W-Series. Switch. Fully sealed and submersible IP68 protection including below the panel Tri-seal design Connector with twin locking tabs WSeries Switch Carling Technologies set the standard for performance and aesthetics with the widely successful, often imitated but never duplicated, VSeries rocker switches. Building further upon that

More information

W-Series SEALED ROCKER SWITCHES

W-Series SEALED ROCKER SWITCHES W-Series SEALED ROCKER SWITCHES Carling Technologies set the standard for performance and aesthetics with the widely successful, often imitated, but never duplicated, V-Series rocker switches. Building

More information

Sealed Vehicle Rocker (SVR)

Sealed Vehicle Rocker (SVR) Sealed Vehicle Rocker (SVR) SEALED VEHICLE ROCKER SVR SVR Series TABLE OF CONTENTS Description How to Order - Descriptions - Dimensions 6- Icons Page Back DESCRIPTION Eaton is excited to present the Sealed

More information

2.4 Dual Motion Safety Switch /8007 EURO SR /8005 Euro Full Size /8065 ESPORT

2.4 Dual Motion Safety Switch /8007 EURO SR /8005 Euro Full Size /8065 ESPORT Rockers NGR. Introduction Product Selection Guide..................................... NGR Product Description....................................... Number Selection..................................

More information

Power rocker switches with protection guard

Power rocker switches with protection guard Distinctive features and specifications Protected against accidental actuation SWKH709 Wide choice of colors Laser etched or pad printed symbols Illuminated or nonilluminated Sealed to IP9K ELECTRICAL

More information

The L-Series switch range by Carling Technologies, available at Dun-Bri Group...

The L-Series switch range by Carling Technologies, available at Dun-Bri Group... The L-Series switch range by Carling Technologies, available at Dun-Bri Group... www.dun-bri.com Dun-Bri Group. UK s only specialist and largest supplier of commercial vehicle lighting systems We sold

More information

Multicolour LED Rocker Switch Panel

Multicolour LED Rocker Switch Panel Multicolour LED Rocker Switch Panel Introduction The E-Plex 428RSP series; a programmable, multi-color LED, rocker switch panel designed to operate within an E-Plex system. This innovative new product

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Wide selection of illumination effects is achieved with single and bicolor, - or -element LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white,

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue as well as bright

More information

A02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm)

A02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866 (22mm) or 1.161 x.846 (29.5mm x 21.5mm) PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm) E A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + one or two

More information

General Specifications

General Specifications General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter

More information

J-Series CIRCUIT BREAKER

J-Series CIRCUIT BREAKER J-Series CIRCUIT BREAKER Designed to provide high levels of circuit protection, the J-Series is a compact, low profile hydraulic magnetic circuit breaker ideally suited for high power density applications.

More information

FP series Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching

FP series Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching Fully illuminated pushbutton switches bushing Ø 24 mm momentary or latching Distinctive features and specifications Threaded bushing UG1410AR2 Full actuator or symbol illumination Large but lightweight

More information

C&K DA Series Miniature Single Pole Rocker Switches

C&K DA Series Miniature Single Pole Rocker Switches Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and

More information

A01 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.630" (16mm)

A01 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.630 (16mm) PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + Switchblock To order, select desired model numbers from tables below. Example:

More information

INDUSTRIAL CONTROLS. Description. Products & features. Specifications. Illuminated or non-illuminated pushbutton switches.

INDUSTRIAL CONTROLS. Description. Products & features. Specifications. Illuminated or non-illuminated pushbutton switches. INDUSTRIAL CONTROLS E A01 SERIES Panel cut-out.630" (16mm) Description Products & features Specifications Illuminated or non-illuminated pushbutton switches Indicators Rotary lever switches eylock switches

More information

A1-A01-A02-A03 series

A1-A01-A02-A03 series A1-A01-A02-A03 series Industrial controls Distinctive features The A01 and A02 series offer ranges of : - pushbutton switches, illuminated or not - indicators - 2 or 3 position keylock switches - 2 or

More information

General Specifications

General Specifications General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA

More information

General Specifications

General Specifications Series YB Short Body Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C

More information

A02 SERIES ILLUMINATED OR NON-ILLUMINATED PUSHBUTTON SWITCHES Panel cut-out Ø22 or 29.5 x 21.5

A02 SERIES ILLUMINATED OR NON-ILLUMINATED PUSHBUTTON SWITCHES Panel cut-out Ø22 or 29.5 x 21.5 ILLUMINATED OR NON-ILLUMINATED PUSHBUTTON SWITCHES Panel cut-out Ø22 or 29.5 x 21.5 A pushbutton assembly requires: screen + lamp (if illuminated) + operator + one or two switchblocks To order these elements,

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,

More information

FP series Fully illuminated pushbutton switches - bushing Ø 30 mm - momentary or latching

FP series Fully illuminated pushbutton switches - bushing Ø 30 mm - momentary or latching Fully illuminated pushbutton switches bushing Ø 30 mm momentary or latching Distinctive features and specifications Full actuator or symbol illumination UG1410AR3 Snapin and threaded bushing models Large

More information

We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories

We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated

More information

Attractive rugged rocker switch

Attractive rugged rocker switch istinctive features Attractive rugged rocker switch UG0AR Removable actuator Easy to stock Easy to customize Uptodate rocker design Smooth curves Wide choice of colours and symbols Laser etched symbols

More information

No. of Terminals. On-Off Screw 2 6 Amps 120 VAC, 3 Amps 240 VAC On-Off Wire Leads 2. Spade 1 21 Amps 14 VDC

No. of Terminals. On-Off Screw 2 6 Amps 120 VAC, 3 Amps 240 VAC On-Off Wire Leads 2. Spade 1 21 Amps 14 VDC Medium & ight-duty Toggle es Great for household appliances and equipment Bat toggle switch, 774007, is ideal for battery-powered equipment including trimmers and lawn mowers ire leads are #18 AG, 6 in.

More information

JAY-EL MARK 10 P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885

JAY-EL MARK 10 P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885 TOP MARK 10 JAY-EL MARK 10 ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885 Catalog No. 7010-5 11-03 MARK 10 DESIGN FEATURES ELECTRICAL THIS SWITCH IS DESIGNED TO MEET THE EXACTING REQUIREMENTS

More information

Thermal Overcurrent Circuit Breaker 3130

Thermal Overcurrent Circuit Breaker 3130 Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 609) of compact design for snap-in panel mounting. Available either with protection on one/both/all

More information

3.2. Pushbuttons. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents

3.2. Pushbuttons. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents . Pushbuttons Product Description Eaton offers a wide range of pushbutton switches for standard industry applications such as appliances, electronics, medical and test instrumentation, office equipment

More information

Push Button Units and Indicator Lights

Push Button Units and Indicator Lights 3SB3, Inscriptions, 22 mm Insert labels Push Button Units and Indicator Lights Push buttons (clear) and illuminated push buttons with a flat button can be fitted with insert labels for identification purposes,

More information

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871 Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor

More information

General Specifications

General Specifications General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA

More information

Bulletin 800MR/800MB Push Buttons

Bulletin 800MR/800MB Push Buttons Bulletin 800MR/800MB Contact Blocks Bulletin 800M contact blocks are available with quick connect type terminals and screw terminals with pressure plates (in two sizes). Each quick connect type termination

More information

IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary

IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families

More information

PB-Series. GFCI/ELCI & Panel Seal

PB-Series. GFCI/ELCI & Panel Seal PB-Series GFCI/ELCI & Panel Seal The PB-Series utilizes the hydraulic magnetic principle which provides precise operation and performance even when exposed to extremely hot and/or cold application environments.

More information

Thermal Overcurrent Circuit Breaker 3130

Thermal Overcurrent Circuit Breaker 3130 Thermal Overcurrent Circuit Breaker 330 Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 609) of compact design for snap-in panel mounting. Available

More information

APEM COMPONENTS LIMITED

APEM COMPONENTS LIMITED APEM COMPONENTS LIMITED Designed and manufactured in the UK Illuminated pushbuttons and indicators, Keylock, Lever and Emergency Stop Switches APEM designs and manufactures three product lines: miniature

More information

Thermal Overcurrent Circuit Breaker 3130

Thermal Overcurrent Circuit Breaker 3130 Thermal Overcurrent Circuit Breaker 330 Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 60934) of compact design for snap-in panel mounting.

More information

M Series Half-inch Rotary Switches

M Series Half-inch Rotary Switches Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment

More information

APEM. K range. Power rocker switches and indicators. Unique rocker design

APEM. K range. Power rocker switches and indicators. Unique rocker design APEM K range Power rocker switches and indicators Wide range Laser etched symbols Illuminated or nonilluminated Optionally sealed to IP8 Unique rocker design K range Power rocker switches and indicators

More information

A1-A01-A02-A03 series Industrial controls

A1-A01-A02-A03 series Industrial controls A-A0-A0-A0 series Industrial controls Distinctive features The A0 and A0 series offer ranges of : - pushbutton switches, illuminated or not - indicators - or position keylock switches - or position rotary

More information

Attractive rugged rocker switch

Attractive rugged rocker switch istinctive features Attractive rugged rocker switch UG0AR Removable actuator Easy to stock Easy to customize Uptodate rocker design Smooth curves Wide choice of colours and symbols Laser etched symbols

More information

Tippette Full Sized Rocker Switches

Tippette Full Sized Rocker Switches Tippette Full Sized Rocker Switches The Tippette Series is a traditionally styled rocker switch, available in sealed or unsealed versions. These switches are appropriate for use in general purpose applications

More information

Distinctive Characteristics

Distinctive Characteristics Standard Size Pushbuttons istinctive Characteristics Carefully designed light diffusion and filtering system produces bright, full surface illumination with front panel relamping. Spot illumination available

More information

C&K ET Series Sealed Subminiature Rocker Switches

C&K ET Series Sealed Subminiature Rocker Switches Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation

More information

Industrial controls. Section G

Industrial controls. Section G Industrial controls Section A1 A01 A02 A03 Distinctive features and specifications 3 Engraved aluminium flush mounting pushbuttons & indicators - Panel cut-out Ø 22 (.866) 5 Pushbutton, rotary lever, keylock

More information

General Specifications

General Specifications Series JW High Inrush 0 & 6 Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical

More information

MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)

MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap

More information

ROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.

ROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X. SWITCH R2 UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.83 PANEL CUTOUT Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch

More information

General Specifications

General Specifications Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum

More information

3VU13, 3VU16 Circuit-Breakers

3VU13, 3VU16 Circuit-Breakers 3VU3, 3VU6 Circuit-Breakers Description The 3VU3, 3VU6 circuit-breakers are compact circuit-breakers for currents up to 80 A which operate according to the current limiting principle. The devices are used

More information

General Specifications

General Specifications Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum

More information

9000 Series Power Rocker and Lever Handle Switches

9000 Series Power Rocker and Lever Handle Switches Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off

More information

SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors

SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS

More information

Sealed pushbutton switches - bushing Ø 16 mm - momentary

Sealed pushbutton switches - bushing Ø 16 mm - momentary Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families

More information

Fuseholders PAGE. Fuseholders.

Fuseholders PAGE. Fuseholders. PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................

More information

Tippette Switches. Tippette Switches. Agency Certifications. Mounting. Carling Technologies

Tippette Switches. Tippette Switches.   Agency Certifications. Mounting. Carling Technologies Tippette Switches Electrical Contact Rating........ 15 amps, 125 VC 10 amps, 250 VC 3/4 HP 125250 VC 15 amps, 1230 VDC Life................ 25,000 cycles circuit dependent 50,000 cycles circuit dependent

More information

HMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch

HMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch Edition 10/2016 HMI Components Series Characteristics The compact Series is especially suited for: Flush design The large rectangular design (24x36mm) features a large illuminated area. Functions The Series

More information

Table of Contents. Incandescent Miniature EMI Suppressed Watertight Size T-1 3/ Incandescent Miniature Size T-1 3/

Table of Contents. Incandescent Miniature EMI Suppressed Watertight Size T-1 3/ Incandescent Miniature Size T-1 3/ Indicator Products Table of Contents DESCRIPTION PRESSLITE TYPE OPTOLITE CONTINUED PAGE NUMBER DESCRIPTION TYPE PAGE NUMBER Friction Cap Bases EMI Suppressed Alternate Action 5 Amp S.P.D.T Form 99-36980

More information

2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview

2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview Overview 6 SERIES Electrical functions Frame type 1 ON - OFF 4 ON ON ON MOM - ON 6 ON - ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON double pole only LH LP Plain With protection guard Number of poles Special

More information

Thermal Circuit Breaker / Switch Series 3131

Thermal Circuit Breaker / Switch Series 3131 Thermal Circuit Breaker / Switch Series 33 Description Combination of single pole circuit breaker and ON/OFF switch with soft-touch rocker actuation. Contoured rockers are available with a choice of colours

More information

Jay-El Mark 15 P/N 10732

Jay-El Mark 15 P/N 10732 Jay-El Mark 5 P/N 07 JAY-EL 07 JAY-EL MARK 5 P/N 07 ILLUMINATED SWITCH MEETS REQUIREMENTS OF MIL-S-885 Catalog No. 00G -0 For more information, contact our sales team at 0.5.700 or hmisales@ducommun.com

More information

Selection guide - Section B1 «I» range

Selection guide - Section B1 «I» range Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1

More information

Indicator Lights (Neon, LED and Filament Lamp)

Indicator Lights (Neon, LED and Filament Lamp) Indicator ights (Neon, ED and Filament amp) Colours and voltages: Neon Red, Amber, Green, Clear 100/130V (marked 110V), 200/250V (marked 230V) ED Red, Yellow, Green /2.2V Resistors for other voltages available

More information

Thermal Circuit Breaker / Switch Series 3131

Thermal Circuit Breaker / Switch Series 3131 Description Combination of single pole circuit breaker and N/FF switch with soft-touch rocker actuation. Contoured rockers are available with a choice of colours and legends, with optional illumination.

More information

2SS/2S1/2SM SUB-MINIATURE TOGGLES

2SS/2S1/2SM SUB-MINIATURE TOGGLES 2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the

More information

Control & Signalling Devices 22.5 mm. RoHS. Compliant

Control & Signalling Devices 22.5 mm. RoHS. Compliant Control & Signalling Devices 22.5 mm RoHS Compliant Contents Characteristics General Characteristics Products Push Buttons, Selector Switches, Latching Mushroom Head Push Buttons, Pilot Lights & Illuminated

More information

N W. Thermal Circuit Breaker / Switch Series Description. Typical applications Circuit breaker. Technical data

N W. Thermal Circuit Breaker / Switch Series Description. Typical applications Circuit breaker. Technical data Thermal Circuit Breaker / Switch Series 33 Description Combination of single pole circuit breaker and N/FF switch with soft-touch rocker actuation. Contoured rockers are available with a choice of colours

More information

Series 300. Miniature Rocker & Paddle Switches

Series 300. Miniature Rocker & Paddle Switches Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both

More information

YB2 Panel Seal. New Square Actuator Option. Series YB2. Contact No Thin Flush Mount Pushbuttons. 24mm Square Panel Seal Pushbuttons

YB2 Panel Seal. New Square Actuator Option. Series YB2. Contact No Thin Flush Mount Pushbuttons. 24mm Square Panel Seal Pushbuttons Contact No. 182 YB2 Panel eal Thin Flush Mount Pushbuttons New quare Actuator Option 2011-01-26 www.nkk.com 1 General pecifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V

More information

1000 Series Miniature Slide Switches

1000 Series Miniature Slide Switches Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &

More information

General Specifications

General Specifications Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable

More information

General Specifications

General Specifications Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable

More information

BD-SERIES. BD-Series BATTERY DISCONNECT POWER SWITCH. Resources: Product Highlights: Typical Applications:

BD-SERIES. BD-Series BATTERY DISCONNECT POWER SWITCH. Resources: Product Highlights: Typical Applications: BD-SERIES BD-Series BATTERY DISCONNECT POWER SWITCH Carling Technologies BD-Series battery disconnect switch is designed to minimize battery drain, ensure maintenance personnel safety, and when used in

More information

ø8 A8 Series Miniature Control Units

ø8 A8 Series Miniature Control Units A8 ø8 A8 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals

More information

Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter

Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless

More information

C&K 1000 Series Miniature Slide Switches

C&K 1000 Series Miniature Slide Switches Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &

More information

IP series Latching action pushbutton switches for harsh environments

IP series Latching action pushbutton switches for harsh environments Latching action pushbutton switches for harsh environments Distinctive features and specifications Latching action Actuator remains in the low position when ON. Illuminated and non-illuminated Compact

More information

Non-illuminated Push Buttons

Non-illuminated Push Buttons Non-illuminated Push Buttons 3 Accessories for push buttons Lockout attachment Contact block kits Lens kits Wobblestick kit Push Button Cap Interchangeable, snap-in design Protective caps 9 colors: red,

More information

General Specifications

General Specifications General Specifications Electrical Capacity (Resistive oad) Power evel (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C ogic evel (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA ~ 0.1A

More information

G-Series. Circuit Breaker.

G-Series. Circuit Breaker. -Series Circuit Breaker Carling Technologies -Series hydraulic/magnetic circuit breakers offer the highest quality solution to your circuit protection requirements. The -Series is designed to sense over-current

More information

Micro Switch. NR SERIES ROCKER SWITCH 3-POSITION FLUSH-PANEL MOUNT, SCREW TERMINALS 1NR * Off 2-3* $24.58

Micro Switch. NR SERIES ROCKER SWITCH 3-POSITION FLUSH-PANEL MOUNT, SCREW TERMINALS 1NR * Off 2-3* $24.58 Micro SEALED TOGGLE AND ROCKER SWITCHES A sealed switching chamber enables these toggle and rocker switches to comply with UL 508, paragraph 13.3 hosedown test. These switches survive where panels are

More information

Q SERIES Ø19mm (.748") Panel Mount LED Indicators Distinctive features and specification

Q SERIES Ø19mm (.748) Panel Mount LED Indicators Distinctive features and specification Distinctive features and specification Q19_VOY1603R1US Features 19mm panel mounting LED indicator 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs Plated brass bezel finished in bright

More information

RoHS. Specifications. Part Number Configurator

RoHS. Specifications. Part Number Configurator Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 48VDC Electrical Life: 50,000 Cycles Contact Resistance: 50mΩ Max. Insulation Resistance:

More information

BD-SERIES. BD-Series BATTERY DISCONNECT POWER SWITCH. Resources: Typical Applications: Product Highlights:

BD-SERIES. BD-Series BATTERY DISCONNECT POWER SWITCH. Resources: Typical Applications: Product Highlights: BD-SERIES BD-Series BATTERY DISCONNECT POWER SWITCH Carling Technologies BD-Series battery disconnect switch is designed to minimize battery drain, ensure maintenance personnel safety, and when used in

More information

IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting

IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons

More information

SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS

SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at

More information

Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)

Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC) SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.

More information

Thermal Circuit Breaker / Switch Series 3131

Thermal Circuit Breaker / Switch Series 3131 Thermal Circuit Breaker / Switch Series 33 Description Combination of single pole circuit breaker and N/FF switch with soft-touch rocker actuation. Contoured rockers are available with a choice of colours

More information

SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.

SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design. SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver

More information

SW Tog DP 30A 120/277V Autogrd B&S WH

SW Tog DP 30A 120/277V Autogrd B&S WH 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 3032W SW Toggle DP 30A 120/277V Autogrd B&S WH Eaton Wiring Devices Catalog Number Manufacturer Description Weight per

More information

Contacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Low energy contacts gold plated. Minimum PUSHBUTTON

Contacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Low energy contacts gold plated. Minimum PUSHBUTTON Pilot Devices Technical data UL General UL technical data Contact blocks Rated insulation voltage, UL 600V Rated thermal current 10A / 600VAC 2.5A / 600VDC Minimum rating 24VDC, 5mA Mechanical life (millions

More information

ø10 A1 Series Miniature Control Units

ø10 A1 Series Miniature Control Units A1 ø10 A1 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals

More information

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS SW-IPMOM-1709 DISTINCTIVE FEATURES Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 and IP69K ENVIRONMENTAL SPECIFICATIONS

More information

F-Series. Circuit Breaker

F-Series. Circuit Breaker F-Series Circuit Breaker The F-Series hydraulic/magnetic high amperage circuit breakers are designed to handle high current applications in extremely hot and/or cold locations. Due to its timeproven hydraulic/magnetic

More information

Rockers Product Selection Guide

Rockers Product Selection Guide s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable

More information

F-Series. Circuit Breaker

F-Series. Circuit Breaker F-Series Circuit Breaker The F-Series hydraulic/magnetic high amperage circuit breakers are designed to handle high current applications in extremely hot and/or cold locations. Due to its timeproven hydraulic/magnetic

More information

800 T P B H 16 R. Momentary Contact Push Button Devices, Illuminated. 8 Rockwell Automation Publication 800-TD009A-EN-P

800 T P B H 16 R. Momentary Contact Push Button Devices, Illuminated. 8 Rockwell Automation Publication 800-TD009A-EN-P Momentary Contact Push utton Devices, Illuminated Extended Head Without Guard Cat. No. 800T-P16R Extended Head without Guard Cat. No. 800H-PR16R 800 T P H 16 R a Protection Rating T Metal, Type 4/13 H

More information

DASH LIGHTS & SWITCHES

DASH LIGHTS & SWITCHES DASH LIGHTS & SWITCHES DASH LIGHTS & SWITCHES // PRODUCT FINDER 155 DASH WARNING LIGHTS 158 GENERAL SWITCHES 164 COURTESY SWITCHES 166 BATTERY SWITCHES 168 IGNITION SWITCHES 169 CONTROL BOXES 174 CARLING

More information