HW Series 22mm IEC Style Global Pushbuttons

Transcription

1 ømm - HW Series Blocks Signaling Lights Key features: Locking lever removable contact blocks Finger-safe IP contacts as standard, other terminal styles available Tamperproof construction All E-stops meet EN48 and are compliant with SEMI S standards Worldwide approvals Easy to assemble Choice of black plastic or metallic front bezels Incandescent or LED illumination Transformer or full voltage Slow make double break self cleaning contacts HW Series mm IEC Global Pushbuttons IDEC s HW switches are The best engineered switch in the world for a reason. Carrying the CE mark, UL, CSA, CCC (Chinese), and TUV approvals, these switches are designed for use in almost any part of the world. Complete with finger-safe contact blocks offering IP protection, these 7/8 Electrical Mechanical File No. E6896 Rated perational Characteristics Maximum Inrush Current Rated Insulation Voltage Rated Switching ver-voltage Rated Impulse Withstanding Voltage Rated Thermal Current Minimum Switching Capacity Electrical Reliability Lamp Ratings Contact peration Positive Action peration (Emergency Stops with NC contacts) perating Force File No. LR9374 HW: The Best Engineered Switch in the World (mm) switches include illuminated and non-illuminated pushbuttons, pilot lights, selector switches, and emergency stop switches. All switches also incorporate mechanically keyed safety locking levers, ensuring correct installation and maintaining safety in high-vibration applications. Registration No. R95589 (E-stops) Registration No. R55436 (Dual Pushbuttons) Registration No. J9655 (Pilot Lights) Registration No. J (all other switches) Specifications Certificate No AC-5: A6 or Ue = 5V, le = 3A (N, NC, N-EM, NC-LB) DC-3: P6 or Ue = 5V, le =.A (N, NC) DC-3: Q6 or Ue = 5V, le =.9A (N-EM, NC-LB) 4 A (4 ms) 6V Less than 4kV, conforming to IEC6947-4kV for contact circuit,.5kv for lamp circuit Amp 5 ma at 3V AC/DC MTBF < fault for million operation cycles (3V DC, 5mA) Incandescent: W LEDs: 6V/7mA max, V & 4V/mA max, & 4V/mA max Slow break NC or N, self-cleaning 5.5mm to mm travel to latch, 45N minimum force to latch mm maximum travel,,8 operations per hour maximum for a Pushlock Turn Reset 9 operations per hour maximum for a Push-Pull Flush and extended pushbuttons with N or NC contact: 6.±N (momentary), 7.±N (maintained) Additional contacts N or NC: +3.N (momentary), + 3.3N (maintained).8 N m (7. in lb.) Minimum x AWG, max. x 4 AWG or x AWG Initial contact resistance of 5mΩ or less 4mm (N and NC), mm (N-EM and NC-LB) Reference Value: /4 V (ø non-reversing), 4V (3ø non-reversing) Silver (gold plated contacts available - contact IDEC) peration: 5 to +5 C (without freezing), Storage: 4 to +7 C (without freezing) to 55Hz, 98m/sec (G) conforming to IEC m/sec (G) conforming to IEC Recommended Torque Applicable Wire Size Contact Resistance Contact Gap Horsepower Rating Contact Material perating Temperature Vibration Resistance Shock Resistance Mechanical Life Momentary pushbuttons: 5,, (9 operations per hour), All other switches: 5, 584

2 ømm - HW Series Standards & Approvals Contact Ratings Characteristics Conforming to Standards Approvals File No. E6896 File No. LR9374 Registration No. R95589 (E-stops) Registration No. R55436 (Dual Pushbuttons) Registration No. J9655 (Pilot Lights) Registration No. J (all other switches) Certificate No Electric Shock Protection Degree of Protection (conforming to IEC659) Pollution Degree (conforming to IEC6947-) External Short-Circuit Protection Referencing Pushbuttons Illuminated Pushbuttons Selector Switches Illuminated Selector Switches Pushbutton Selectors EN6947-, EN , VDE66-, UL58, CSA C- No.4 CSA: pushbuttons and selector switches: A6 pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (/, 5,, /, 3, 4, 38, 4/44, 48V) UL: pushbuttons and selector switches: A6 pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (/, 5,, /, 3, 4, 38, 4/44, 48V) TÜV: pushbuttons and selector switches: A6=P6 (N, NC)/Q6 (N-EM, NC-LB) pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (/, 5,, /, 3, 4, 38, 4/44, 48V) Class conforming to IEC6536 IP65 (from front of the panel) IP (Type HW-F contact block) 3 for switches not using a transformer, for switches using a transformer A 5V fuse conforming to IEC669- Conforming to CENELEC EN55 Contact Block Type HW-C/HW-F /HW-G Rated Insulation Voltage 6V Rated Continuous Current A Contact Ratings by Utilization Category IEC AC-5 (A6) DC-3 (P6) perational Voltage 4V 48V 5V V V 44V AC- Control of resistive loads & solid state loads A A A 6A A AC 5/6 Hz perational AC-5 Control of electromagnetic loads (> 7VA) A 7A 5A 3A A Current DC- Control of resistive loads & solid state loads 8A 5A.A.A DC DC-3 Control of electromagnets 5A A.A.6A For dimensions, see page 635. LED Lamp Ratings (LSTD Type) Model LSTD-6k LSTD-k LSTD-k LSTD-Hk LSTD-M4k Lamp Base BA9S/3 Rated Voltage 6V AC/DC V AC/DC 4V AC/DC V AC 4V AC Voltage Range 6V AC/DC ±% V AC/DC ±% 4V AC/DC ±% V AC ±5% 4V AC ±5% A, R, W: 7mA AC Current G, S: 8mA ma ma ma ma Draw A, R, W: 4mA DC G, S: 5.5mA ma ma Color Code A (amber), G (green), R (red), S (blue), W (white) Lamp Base Color Same as illumination color Voltage Marking Die stamped on the base Life (reference value) Approx. 5, hours (The luminance reduces to 5% the initial intensity when used on complete DC.) A, R, W A, R, W Internal Circuit G, S LED Chip Protection Diode Zener Diode In place of k, specify the Lens/LED Color Code. Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 585

3 ømm - HW Series Non-Illuminated Round Pushbuttons (Assembled) Signaling Lights Round Flush Round Extended Function Contacts Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel perator nly HWB-M-j HW4B-M-j HWB-M-j HW4B-M-j N HWB-MF-j HW4B-MF-j HWB-MF-j HW4B-MF-j NC HWB-MF-j HW4B-MF-j HWB-MF-j HW4B-MF-j Momentary N-NC HWB-MF-j HW4B-MF-j HWB-MF-j HW4B-MF-j N HWB-MF-j HW4B-MF-j HWB-MF-j HW4B-MF-j NC HWB-MF-j HW4B-MF-j HWB-MF-j HW4B-MF-j N-NC HWB-MF-j HW4B-MF-j HWB-MF-j HW4B-MF-j perator nly HWB-A-j HW4B-A-j HWB-A-j HW4B-A-j N HWB-AF-j HW4B-AF-j HWB-AF-j HW4B-AF-j NC HWB-AF-j HW4B-AF-j HWB-AF-j HW4B-AF-j Maintained N-NC HWB-AF-j HW4B-AF-j HWB-AF-j HW4B-AF-j N HWB-AF-j HW4B-AF-j HWB-AF-j HW4B-AF-j NC HWB-AF-j HW4B-AF-j HWB-AF-j HW4B-AF-j N-NC HWB-AF-j HW4B-AF-j HWB-AF-j HW4B-AF-j Blocks j Button Color Code Color Code Black B Green G Red R Blue S White W Yellow Y Gray N* *Gray available for round flush only.. In place of j, specify the Button Color Code from table below.. For nameplates and accessories, see page 63 and For dimensions, see page For contact assembly part numbers, see page All assembled part numbers in catalog include standard, fingersafe (HW-F...) contacts. 6. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R). 7. perator only models include operator plus button. 8. Additional contact configurations available (up to 6 total contacts)

4 ømm - HW Series Bezel : Plastic Bezel 4: Metal Bezel Structure H W B - M F R Function M: Momentary Action perator A: Maintained Action : Flush s : Extended F: Fingersafe Contacts C: Exposed Screw s blank: Spring-up s Contact Blocks + Mounting Adaptor + Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw Dummy Block HW-F HW-FR HW-G HW-GR HW-C HW-CR Contact Block Mounting Adaptor HW-CBC TW-DB. Used to mount contact blocks to operator.. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. Non-Illuminated Round Pushbuttons (Replacement Parts) HW-F HW-FR HW-G HW-GR HW-C HW-CR Safety Lever Lock + Anti-Rotation Ring Anti-Rotation Ring perators Round Flush/ Extended Contact Arrangement : N : N : NC : NC : N-NC : N-NC Button Colors B: Black G: Green R: Red S: Blue W: White Y: Yellow N: Gray* *Available for round flush only + perator + Button = Completed Unit HW9Z-RL Use with notched panel cutout to prevent unit rotation. Momentary Maintained Safety Lever Lock HW9Z-LS Plastic Bezel HWB-M HWB-A Metal Bezel HW4B-M HW4B-A Buttons Round Flush Round Extended HWA-B-j HWA-B-j. In place of j, specify the Button Color Code from table. j Button Color Code Color Code Color Code Black B White W Green G Yellow Y Red R Gray N* Blue S *Gray available for round flush only. Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 587

5 ømm - HW Series Non-Illuminated Mushroom Head Pushbuttons (Assembled) Signaling Lights ø9mm Mushroom Head ø4mm Mushroom Head Function Contacts Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel perator nly HWB-M3-j HW4B-M3-j HWB-M4-j HW4B-M4-j N HWB-M3F-j HW4B-M3F-j HWB-M4F-j HW4B-M4F-j NC HWB-M3F-j HW4B-M3F-j HWB-M4F-j HW4B-M4F-j Momentary N-NC HWB-M3F-j HW4B-M3F-j HWB-M4F-j HW4B-M4F-j N HWB-M3F-j HW4B-M3F-j HWB-M4F-j HW4B-M4F-j NC HWB-M3F-j HW4B-M3F-j HWB-M4F-j HW4B-M4F-j N-NC HWB-M3F-j HW4B-M3F-j HWB-M4F-j HW4B-M4F-j perator nly HWB-A3-j HW4B-A3-j HWB-A4-j HW4B-A4-j N HWB-A3F-j HW4B-A3F-j HWB-A4F-j HW4B-A4F-j NC HWB-A3F-j HW4B-A3F-j HWB-A4F-j HW4B-A4F-j Maintained N-NC HWB-A3F-j HW4B-A3F-j HWB-A4F-j HW4B-A4F-j N HWB-A3F-j HW4B-A3F-j HWB-A4F-j HW4B-A4F-j NC HWB-A3F-j HW4B-A3F-j HWB-A4F-j HW4B-A4F-j N-NC HWB-A3F-j HW4B-A3F-j HWB-A4F-j HW4B-A4F-j Blocks ø6mm Mushroom Head Function Contacts Plastic Bezel perator nly HWB-M5-j* N HWB-M5F-j* NC HWB-M5F-j* Momentary N-NC HWB-M5F-j* N HWB-M5F-j* NC HWB-M5F-j* N-NC HWB-M5F-j* j Button Color Code Color Code Black B Green G Red R Blue S White W Yellow Y. In place of j, specify the Button Color Code from table.. *6mm mushroom available only in red, green, black, and yellow. 3. For nameplates and accessories, see page 63 and For dimensions, see page For contact assembly part numbers, see page All assembled part numbers in catalog include standard fingersafe (HW-F...) contacts. 7. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R). 8. Units with exposed screw terminals (HW-C...) must be ordered as sub-components. 9. perator only models include operator plus button.. Additional contact configurations available (up to 6 total contacts)

6 ømm - HW Series Bezel : Plastic Bezel 4: Metal Bezel (Not available for 6mm mushroom) Contact Blocks + Function M: Momentary Action A: Maintained Action (Not available for 6mm jumbo mushroom pushbutton.) Mounting Adaptor Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw Dummy Block HW-F HW-FR HW-G HW-GR HW-C HW-CR Contact Block Mounting Adaptor HW-CBC Structure H W B - M 3 F R perator 3: ø9mm Mushroom 4: ø4mm Mushroom 5: ø6mm Mushroom s F: Fingersafe Contacts C: Exposed Screw s blank: Spring-up s Non-Illuminated Mushroom Head Pushbuttons (Replacement Parts) TW-DB. Used to mount contact blocks to operator.. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. + HW-F HW-FR HW-G HW-GR HW-C HW-CR Safety Lever Lock + Anti-Rotation Ring Safety Lever Lock Contact Arrangement : N : N : NC : NC : N-NC : N-NC Button Colors B: Black G: Green R: Red S: Blue W: White Y: Yellow + perator + Button = Completed Unit HW9Z-LS Anti-Rotation Ring Appearance perators ø9mm Mushroom ø4mm Mushroom Ø6mm Jumbo Mushroom Momentary Maintained Momentary HW9Z-RL Plastic Bezel HWB-ML HWB-AL HWB-M5-j* Metal Bezel HW4B-ML HW4B-AL. *6mm mushroom operator includes non-removable button (available in red, black, green and yellow only).. For nameplates and accessories, see page 63 and For dimensions, see page 635. Buttons ø9mm Mushroom Cap ø4mm Mushroom Cap HWA-B3-j HWA-B4-j. In place of j, specify the Button Color Code from table. j Button Color Code Color Code Color Code Black B Blue S Green G White W Red R Yellow Y HWB-M5 available only in black, red, green and yellow. Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 589

7 ømm - HW Series Non-Illuminated Square Pushbuttons (Assembled) Blocks Signaling Lights Function Momentary Maintained Contacts j Button Color Code Color Black Green Red Blue White Yellow Code B G R S W Y Square Flush Plastic Bezel Square Extended Plastic Bezel perator nly HWB-M-j HWB-M-j N HWB-MF-j HWB-MF-j NC HWB-MF-j HWB-MF-j N-NC HWB-MF-j HWB-MF-j N HWB-MF-j HWB-MF-j NC HWB-MF-j HWB-MF-j N-NC HWB-MF-j HWB-MF-j perator nly HWB-A-j HWB-A-j N HWB-AF-j HWB-AF-j NC HWB-AF-j HWB-AF-j N-NC HWB-AF-j HWB-AF-j N HWB-AF-j HWB-AF-j NC HWB-AF-j HWB-AF-j N-NC HWB-AF-j HWB-AF-j. In place of j, specify the Button Color Code from table.. For nameplates and accessories, see page 63 and For dimensions, see page For contact assembly part numbers, see page Square pushbuttons available in plastic bezel only. 6. All assembled part numbers in catalog include standard fingersafe (HW-F...) contacts. 7. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R). 8. Units with exposed screw terminals (HW-C...) must be ordered as sub-components. 9. perator only model includes operator and button.. Additional contact configurations available (up to 6 total contacts). 59

8 ømm - HW Series Function M: Momentary Action A: Maintained Action Contact Blocks + Mounting Adaptor perator : Flush : Extended Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw Dummy Block HW-F HW-FR HW-G HW-GR HW-C HW-CR Contact Block Mounting Adaptor HW-CBC Structure H W B - M F R s F: Fingersafe Contacts C: Exposed Screw s blank: Spring-up s Non-Illuminated Square Pushbuttons (Replacement Parts) + TW-DB. Used to mount contact blocks to operator.. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. HW-F Safety Lever Lock HW-FR HW-G HW-GR HW-C HW-CR + Anti-Rotation Ring Safety Lever Lock Contact Arrangement : N : N : NC : NC : N-NC : N-NC Button Colors B: Black G: Green R: Red S: Blue W: White Y: Yellow + perator + Button = Completed Unit HW9Z-LS Anti-Rotation Ring Appearance perators Square Flush Extended HW9Z-RL Use with notched panel cutout to prevent unit rotation. Momentary Maintained Plastic Bezel HWB-M HWB-A. For nameplates and accessories, see pages 63 and For dimensions, see page 635. Buttons Square Flush Square Extended HWA-B-j HWA-B-j. In place of j, specify the Button Color Code from table. j Button Color Code Color Code Color Code Black B Blue S Green G White W Red R Yellow Y Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 59

9 ømm - HW Series Non-Illuminated E-Stop Pushbuttons (Assembled) Signaling Lights Ø9mm Head Pushlock Turn Reset Ø4mm Head Pushlock Turn Reset Contacts Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel perator nly HWB-V3j HW4B-V3j HWB-V4j HW4B-V4j N HWB-V3F-j HW4B-V3F-j HWB-V4F-j HW4B-V4F-j NC HWB-V3F-j HW4B-V3F-j HWB-V4F-j HW4B-V4F-j N-NC HWB-V3F-j HW4B-V3F-j HWB-V4F-j HW4B-V4F-j N HWB-V3F-j HW4B-V3F-j HWB-V4F-j HW4B-V4F-j NC HWB-V3F-j HW4B-V3F-j HWB-V4F-j HW4B-V4F-j Ø4mm Head EM Pushlock Turn Reset Ø4mm Head Pushlock Key Reset Contacts Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel perator nly HWB-V4R-EM-* HW4B-V4R-EM-* HWB-4R* HW4B-4R* N HWB-V4F-R-EM-* HW4B-V4F-R-EM-* HWB-4F-R* HW4B-4F-R* NC HWB-V4F-R-EM-* HW4B-V4F-R-EM-* HWB-4F-R* HW4B-4F-R* N-NC HWB-V4F-R-EM-* HW4B-V4F-R-EM-* HWB-4F-R* HW4B-4F-R* N HWB-V4F-R-EM-* HW4B-V4F-R-EM-* HWB-4F-R* HW4B-4F-R* NC HWB-V4F-R-EM-* HW4B-V4F-R-EM-* HWB-4F-R* HW4B-4F-R* Blocks Contacts perator nly N NC N-NC N NC ø6mm Head Pushlock Turn Reset Plastic Bezel HWB-V5R* HWB-V5F-R* HWB-V5F-R* HWB-V5F-R* HWB-V5F-R* HWB-V5F-R*. * Available in Red only.. Available in red or yellow. Insert color code in place of j (R: Red, Y: Yellow).. For accessories, see page For dimensions, see page For nameplates and shrouds, see page For contact assembly part numbers, see page All HW series E-stops comply with EN , the IEC E-Stop Addendum to the Low Voltage Directive, this includes tamper proof operation whereby a change of contact state is not possible by teasing or floating the operator. 8. All assembled part numbers in catalog include standard fingersafe (HW-F...) contacts. 9. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R).. Units with exposed screw terminals (HW-C...) must be ordered as sub-components.. perator only models include operator and button.. Additional contact configurations available (up to 6 total contacts). 59

10 ømm - HW Series Bezel : Plastic Bezel 4: Metal Bezel (not available for 6mm jumbo mushroom) Function V: Pushlock Turn Reset : Pushlock Key Reset Contact Blocks + Mounting Adaptor + Contact Blocks Contacts N NC Contact Blocks Standard Fingersafe (IP) Spring-Up Exposed Screw Dummy Block HW-F HW-FR HW-G HW-GR HW-C HW-CR Contact Block Mounting Adaptor HW-CBC. Used to mount contact blocks to operator.. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. TW-DB Structure H W B V 3 F R EM- perator 3: ø9mm Head 4: ø4mm Head 5: ø6mm Head s F: Fingersafe C: Exposed Screw blank: Springup Contact Arrangement : N : N : NC : NC : N-NC : N-NC Non-Illuminated E-Stop Pushbuttons (Replacement Parts) HW-F HW-FR HW-G HW-GR HW-C HW-CR Safety Lever Lock + Anti-Rotation Ring Safety Lever Lock HW9Z-LS Engraved Button* EM-: EM switch *ption available for red EM E-Stop only Button Colors R: Red Y: Yellow Note: some switches only available in red. + perator = Completed Unit Anti-Rotation Ring Appearance HW9Z-RL Use with notched panel cutout to prevent unit rotation. perators Plastic Metal ø9mm Head Pushlock Turn Reset red HWB-V3R HW4B-V3R ø4mm Head Pushlock Turn Reset ø4mm Head EM Pushlock Turn Reset* ø4mm Head Pushlock Key Reset* ø6mm Head Pushlock Turn Reset* yellow HWB-V3Y HW4B-V3Y red HWB-V4R HW4B-V4R yellow HWB-V4Y HW4B-V4Y HWB-V4R-EM- HWB-4R HWB-V5R HW4B-V4R-EM- HW4B-4R. *Available in red only.. All E-Stop buttons are not removable from the operator. Note: Determine mounting centers to ensure proper spacing. Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 593

11 ømm - HW Series Push Pull & Unibody E-Stop Pushbuttons (Assembled) Signaling Lights ø4mm Head Push Pull Contacts Plastic Bezel Metal Bezel perator nly (Red) HWB-YR HW4B-YR perator nly (Yellow) HWB-YY HW4B-YY N HWB-YF-j HW4B-YF-j NC HWB-YF-j HW4B-YF-j Contacts N-NC NC N-NC ø4mm Unibody Pushlock Turn Reset* Plastic Bezel HWE-BV4F-R HWE-BV4F-R HWE-BV4R-TK93- N-NC HWB-YF-j HW4B-YF-j NC HWB-YF-j HW4B-YF-j N HWB-YF-j HW4B-YF-j Blocks Unibody Illuminated E-Stops* Contacts LED Incandescent N-NC HWE-LV4FQD-R-l HWE-LV4FQ-R-l NC HWE-LV4FQD-R-l HWE-LV4FQ-R-l NC (with push-on illumination) N-NC (with push-on illumination ) HWE-TV4FQD-R-l HWE-TV4FQD-R-l HWE-TV4FQ-R-l HWE-TV4FQ-R-l l Full Voltage Code Voltage Code 6VAC/DC 6V VAC/DC V 4VAC/DC 4V V AC* V 4V AC* 4V *LED only. Numbering (Unibody only) Models Number N-NC N = 3/4, NC = / NC NC = /, NC = / HWE-L HWE-T Lamp + =, Lamp - =. * Available in Red only.. Available in red or yellow. Insert color code in place of j (R: Red, Y: Yellow). 3. In place of l, specify Full Voltage Code. 4. With single unit construction, the positive action contacts are integrated in the body of the switch. This provides an extra degree of safety and reliability for critical emergency stop functions. 5. In the illuminated version, the light is independent of the switch action (except push-on LED model). 6. For accessories, see page For dimensions, see page For nameplates and shrouds, see page For contact assembly part numbers, see page All HW Series E-Stop operators include non-removable color caps.. All HW series E-Stops comply with EN , the IEC E-Stop Addendum to the Low Voltage Directive, this includes tamper proof operation whereby a change of contact state is not possible by teasing or floating the operator.. All HW series E-Stop switches comply with SEMI S standards. 3. All assembled part numbers in catalog include standard fingersafe (HW-F...) contacts. 4. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R). 5. Units with exposed screw terminals (HW-C...) must be ordered as sub-components. 6. Additional contact configurations available (up to 6 total contacts)

12 ømm - HW Series Bezel : Plastic Bezel 4: Metal Bezel* (*not available for HWE unibody) Structure H W E L V 4 F Q D R - 4V Function B: Push Pull E: Pushlock Turn Reset Illumination BV4: Non-illuminated (unibody style) LV4: Illuminated TV4: Illuminated Push n Y: Non-illuminated Push Pull E-Stop Contact Blocks + Mounting Adaptor + Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw Dummy Block HW-F HW-FR HW-G HW-GR HW-C HW-CR Contacts : N-NC : NC : N : N Lamp Code D: LED blank: Incandescent Button Colors R: Red Y: Yellow* (*only available in 4mm Push Pull E-Stop) Illumination Circuit blank: 4mm Push Pull & Non-illuminated Unibody E-Stop Q: Illuminated Unibody E-Stop Illuminated & Non-Illuminated E-Stop Pushbuttons (Replacement Parts) TW-DB HW-F HW-FR HW-G HW-GR HW-C HW-CR. There are no replacement parts for the HWE unibody E-Stop.. For illuminated unibody E-Stop, see page 634 for replacement lens. Safety Lever Lock + Anti-Rotation Ring Contact Block Mounting Adaptor HW-CBC. Used to mount contact blocks to operator.. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. Safety Lever Lock HW9Z-LS Full Voltage Code (Illuminated E-Stop) 6V: 6V AC/DC V: V AC/DC 4V: 4V AC/DC V: VC AC* 4V: 4V AC* *LED only + perator = Completed Unit Anti-Rotation Ring Appearance perators ø4mm Head Push-Pull HW9Z-RL Use with notched panel cutout to prevent unit rotation. Plastic Metal Plastic Metal red yellow HWB-YR HW4B-YR HWB-YY HW4B-YY All E- Stop Buttons are not removable from the operator. Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 595

13 ømm - HW Series E-Stop Stations Signaling Lights 9mm Pushlock Turn Reset 4mm Pushlock Turn Reset Contacts Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel N-NC FBW-HWB-V3R FBW-HW4B-V3R FBW-HWB-V4R FBW-HW4B-V4R NC FBW-HWB-V3R FBW-HW4B-V3R FBW-HWB-V4R FBW-HW4B-V4R 4mm Push-Pull Reset 4mm Pushlock Key Reset Contacts Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel N-NC FBW-HWB-YR FBW-HW4B-YR FBW-HWB-4R FBW-HW4B-4R NC FBW-HWB-YR FBW-HW4B-YR FBW-HWB-4R FBW-HW4B-4R Contacts Contact Block Contact Configuration Part Number Blocks Single N NC YW-ER YW-E Finger-safe Screw N 4mm EM Pushlock YW-EWR Turn Reset Contacts terminal Plastic Bezel Metal Bezel N-NC Double NC FBW-HWB-V4R-EM- YW-EW FBW-HW4B-V4R-EM- NC FBW-HWB-V4R-EM- N-NC YW-EWR FBW-HW4B-V4R-EM-. Maximum of two contact blocks.. Box is supplied with yellow top and black bottom only. Dummy block CW-DB Contact Block Mounting Adaptor CW-CN 596

14 ømm - HW Series Jumbo Dome LED Incandescent perator nly Full Voltage 4V AC/DC perator nly Full Voltage 4V AC/DC Jumbo Dome Pilot Lights (Assembled) Plastic Bezel HWP-5Q HWP-5Q4-k HWP-5Q7* HWP-5Q7-k. In place of k, specify the Lens/LED Color Code.. *Incandescent operator comes with bulb. 3. Available with spring-up terminals in 4V only. 4. For nameplates and accessories, see page 63 and For dimensions, see page 635. k Lens/LED Color Code Color Code Amber A Green G Red R Blue S White PW Yellow Y Jumbo Dome Replacement Parts Item Appearance Description Lens LED Diffusing Lens* Polycarbonate Lens HWA-P5k HW9Z-PP5C LED Lamps LED Lamp LSTDB-k. In place of k, specify the Lens/LED Color Code.. *Diffusing lens for LED models only. 3. Use white LED for yellow lens. Lamp Ratings Part Number perating Voltage Rated Current Power Consumption LED LSTDB- 5mA.36W 4V AC/DC ±% Incandescent LSB- 5mA 3.6W Actual Size *Use PW for LED module, use C for lens. Jumbo Dome Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 597

15 ømm - HW Series Pilot Lights (Assembled) Blocks Signaling Lights Round Flush Dome Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel perator nly HWP-FQ-k HW4P-FQ-k HWP-FQ-k HW4P-FQ-k Full Voltage HWP-FQm-k-l HW4P-FQm-k-l HWP-FQm-k-l HW4P-FQm-k-l V AC HWP-FHm-k HW4P-FHm-k HWP-FHm-k HW4P-FHm-k Transformer 4V AC HWP-FM4m-k HW4P-FM4m-k HWP-FM4m-k HW4P-FM4m-k 48V AC HWP-FT8m-k HW4P-FT8m-k HWP-FT8m-k HW4P-FT8m-k DC-DC Converter* V DC HWP-DD-k HWP-DD-k Square Flush Plastic Bezel perator nly HWP-FQ-k Full Voltage HWP-FQm-k-l V AC HWP-FHm-k Transformer 4V AC HWP-FM4m-k 48V AC HWP-FT8m-k DC-DC Converter* V DC HWP-DD-k k Lens/LED Color Code Color Code Amber A Green G Red R Blue S White W Yellow Y l Full Voltage Code Voltage Code 6VAC/DC 6V VAC/DC V 4VAC/DC 4V V AC (LED only) V 4V AC (LED only) 4V m Lamp Type Code Lamp Code Incandescent Blank LED D. In place of k, specify the Lens/LED Color Code from table below.. In place of lspecify the Full Voltage Code from table below. 3. In place of m specify Lamp Type Code from table below. 4. *DC-DC convertor voltage input from 9-4V DC, comes with spring-up terminals only. 5. DC-DC converter models with LED lamps only. 6. For nameplates and accessories, see page 63 and For dimensions, see page Pilot lights do not come with anti-rotation ring. 9. perator models come with operator and lens.. Yellow pilot light comes with white LED

16 ømm - HW Series Bezel : Round Plastic : Square Plastic 4: Round Metal perator : Flush : Dome Structure H W P F Q D R V Illumination Circuit Q: Full Voltage H: V AC Transformer M4: 4V AC Transformer T8: 48V AC Transformer D: DC-DC Converter Lamp Type Code D: LED Blank: Incandescent Pilot Lights (Replacement Parts) Lens/LED Colors A: Amber G: Green R: Red S: Blue W: White Y: Yellow Transformer* + Lamp + perator + Lens = Completed Unit (not applicable for full voltage units) Transformer Units Voltage LED/Incandescent HW-FH V AC HW-MH* HW-FM4 4V AC HW-MM4* (6V secondary voltage) 48V AC V DC** HW-FT8 HW-RT8* HW-RD*. *With spring-up terminals - to use spring-up terminal type, must use transformer type operator designed for spring-up transformer.. ** DC-DC converter voltage input from 9-4V DC. Lamps Voltage 6V AC/DC LSTD-6k LED V AC/DC LSTD-k 4V AC/DC LSTD-k V AC LSTD-Hk 4V AC LSTD-M4k Incandescent 6V AC/DC IS-6 V AC/DC 4V AC/DC IS- IS-4. In place of k, specify the LED Color Code.. The LED contains a current-limiting resistor and reverse polarity protection diodes. k LED Color Code Color Code Color Code Amber A Blue S Green G White W Red R For yellow lens use white LED. Lamp Voltage (full voltage units only) 6V: 6V AC/DC V: V AC/DC 4V: 4V AC/DC V: V AC* 4V: 4V AC* *LED only perators Type Plastic Bezel Metal Bezel Round Flush Standard HWP-FQ HW4P-FQ Full Voltage Spring-up s HWP-Q HW4P-Q Transformer Standard HWP- HW4P- Spring-up s HWP- Dome Standard HWP-FQ HW4P-FQ Full Voltage Spring-up s HWP-Q HW4P-Q Transformer Standard HWP- HW4P- Spring-up s HWP- Square Flush Standard HWP-FQ Full Voltage Spring-up s HWP-Q Transformer Standard HWP- Spring-up s HWP- Lenses Round/ Flush Dome Square/ Flush. Transformer type requires separate transformer & lamp. Must select correct transformer bases on standard or spring up terminal type. Use 6V lamps or LEDs.. Full voltage type only requires lamp. HWA-P-l HWA-P-l HWA-P-l In place of l, specify the Lens Color Code. l Lens Color Code Color Code Amber A Green G Red R Blue S White W Yellow Y For yellow lens use white LED. Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 599

17 ømm - HW Series Illuminated Round Pushbuttons (Assembled) Signaling Lights Illuminated Full Voltage Pushbuttons Momentary Maintained Contacts perator nly N NC N-NC N perator nly N NC N-NC N Flush Extended Extended w/ Full Shroud Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel HWL-M-k HWL-MFQm-k-l HWL-MFQm-k-l HWL-MFQm-k-l HWL-MFQm-k-l HWL-A-k HWL-AFQm-k-l HWL-AFQm-k-l HWL-AFQm-k-l HWL-AFQm-k-l HW4L-M-k HW4L-MFQm-k-l HW4L-MFQm-k-l HW4L-MFQm-k-l HW4L-MFQm-k-l HW4L-A-k HW4L-AFQm-k-l HW4L-AFQm-k-l HW4L-AFQm-k-l HW4L-AFQm-k-l HWL-M-k HWL-MFQm-k-l HWL-MFQm-k-l HWL-MFQm-k-l HWL-MFQm-k-l HWL-A-k HWL-AFQm-k-l HWL-AFQm-k-l HWL-AFQm-k-l HWL-AFQm-k-l HW4L-M-k HW4L-MFQm-k-l HW4L-MFQm-k-l HW4L-MFQm-k-l HW4L-MFQm-k-l HW4L-A-k HW4L-AFQm-k-l HW4L-AFQm-k-l HW4L-AFQm-k-l HW4L-AFQm-k-l HWL-MF-k HWL-MFFQm-k-l HWL-MFFQm-k-l HWL-MFFQm-k-l HWL-MFFQm-k-l HWL-AF-k HWL-AFFQm-k-l HWL-AFFQm-k-l HWL-AFFQm-k-l HWL-AFFQm-k-l HW4L-MF-k HW4L-MFFQm-k-l HW4L-MFFQm-k-l HW4L-MFFQm-k-l HW4L-MFFQm-k-l HW4L-AF-k HW4L-AFFQm-k-l HW4L-AFFQm-k-l HW4L-AFFQm-k-l HW4L-AFFQm-k-l Illuminated Transformer Pushbuttons Blocks Momentary Maintained Contacts perator nly N-NC N perator nly N-NC N Flush Extended Extended w/ Full Shroud Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel HWL-M-k HWL-MFlm-k HWL-MFlm-k HWL-A-k HWL-AFlm-k HWL-AFlm-k. In place of k, specify Lens/LED Color Code from table.. In place of lspecify Voltage Code from table. 3. In place of m specify Lamp Code from table. 4. Light independent of switch position. 5. For replacement part numbers, see page For nameplates and accessories, see page 63. and For dimensions, see page For contact assembly part numbers, see page Full voltage and transformer models use the same operator.. Additional contact configurations available (up to 6 total contacts).. Yellow pushbutton comes with white LED. HW4L-M-k HW4L-MFlm-k HW4L-MFlm-k HW4L-A-k HW4L-AFlm-k HW4L-AFlm-k HWL-M-k HWL-MFlm-k HWL-MFlm-k HWL-A-k HWL-AFlm-k HWL-AFlm-k k Lens/LED Color Code Color Code Amber A Green G Red R Blue S White W Yellow Y Yellow LED not available. Use white LED for yellow lens. HW4L-M-k HW4L-MFlm-k HW4L-MFlm-k HW4L-A-k HW4L-AFlm-k HW4L-AFlm-k HWL-MF-k HWL-MFFlm-k HWL-MFFlm-k HWL-AF-k HWL-AFFlm-k HWL-AFFlm-k l Voltage Code Full Voltage Models Transformer Models Voltage Code Voltage Code 6V AC/DC 6V V AC H V AC/DC V 4V AC M4 4V AC/DC 4V 48V AC T8 V AC (LED only) V 4V AC (LED only) 4V HW4L-MF-k HW4L-MFFlm-k HW4L-MFFlm-k HW4L-AF-k HW4L-AFFlm-k HW4L-AFFlm-k m Lamp Code Lamp Code Incandescent Blank LED D 6

18 ømm - HW Series Bezel : Plastic 4: Metal Transformer* + Function M: Momentary A: Maintained Contact Blocks + perator F: Flush F: Extended FF: Extended Structure H W L M F Q D G V Lens Color A: Amber G: Green R: Red Contact Arrangement w/ shroud : N Illumination Circuit : NC Q: Full Voltage : N-NC H: Transformer V AC : N M4: Transformer 4V AC Lamp Code T8: Transformer 48V AC Lead Holder *Transformer not needed with full voltage models. Lamp Circuit Components Description s Lead Holder Dummy Block with Full Voltage Adaptor Full Voltage Adaptor Transformer Unit (6V secondary voltage) For use with HW-CBL on all illuminated pushbutton units. ne required for each deck (pair) of contacts. For use with odd number of contacts. For use with even number of contacts. VAC 4VAC 48VAC V 4V 48V V 4V 48V + Fingersafe Exposed Spring Up Fingersafe Exposed Fingersafe Spring Up Exposed Illuminated Round Pushbuttons (Replacement Parts) Mounting Adaptor Part Number HW-LH3 HW-DAFB HW-DAB HW-GA TW-DAFB TW-DAB TW-F6B TW-F46B TW-F486B HW-T6 HW-T46 HW-L486 TW-T6B TW-T46B TW-T486B DC-DC Converter VDC HW-L6D perators Round Flush/ Extended Extended with Full Shroud HW-GA Dummy Block with full voltage adaptor does not require the use of HW-LH3. Plastic Bezel Metal Bezel Momentary HWL-M HW4L-M Maintained HWL-A HW4L-A Momentary HWL-MF HW4L-MF Maintained HWL-AF HW4L-AF + Safety Lever Lock + Lamp + D: LED Blank: Incandescent Anti-Rotation Ring S: Blue W: White Y: Yellow + perator + Lens = Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw HW-F HW-FR HW-G HW-GR HW-C HW-CR Lamp Voltage (full voltage units only) 6V: 6V AC/DC V: V AC/DC 4V: 4V AC/DC V: VC AC* 4V: 4V AC* *LED only Completed Unit HW-F HW-FR HW-G HW-GR HW-C HW-CR. All assembled part numbers in catalog include standard fingersafe (HW-F...) contacts.. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R). 3. Units with exposed screw terminals (HW-C...) must be ordered as sub-components. Contact Block Mounting Adaptor HW-CBL. Used to mount contact blocks to operator (first pair only).. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. Safety Lever Lock Lenses Round Flush Round Extended HW9Z-LS HWA-L-k HWA-L-k In place of k, specify the Lens Color Code from previous page. Anti-Rotation Ring Appearance Part Number HW9Z-RL Use with notched panel cutout to prevent unit rotation. Lamps Voltage 6V AC/DC LSTD-6k LED V AC/DC LSTD-k 4V AC/DC LSTD-k V AC LSTD-Hk 4V AC LSTD-M4k Incandescent 6V AC/DC V AC/DC 4V AC/DC IS-6 IS- IS-4. In place of k, specify the LED Color Code.. The LED contains a current-limiting resistor and reverse polarity protection diodes. 3. Yellow LED not available, use white LED when using yellow lens. Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 6

19 ømm - HW Series Illuminated Mushroom & Square Pushbuttons (Assembled) Signaling Lights 4mm Mushroom Head Square Flush Contacts Plastic Bezel Metal Bezel Plastic Bezel perator nly HWL-M4-k HW4L-M4-k HWL-M-k N HWL-M4FQm-k-l HW4L-M4FQm-k-l HWL-MFQm-k-l Momentary NC HWL-M4FQm-k-l HW4L-M4FQm-k-l HWL-MFQm-k-l Full Voltage N-NC HWL-M4FQm-k-l HW4L-M4FQm-k-l HWL-MFQm-k-l N HWL-M4FQm-k-l HW4L-M4FQm-k-l HWL-MFQm-k-l perator nly HWL-A4-k HW4L-A4-k HWL-A-k N HWL-A4FQm-k-l HW4L-A4FQm-k-l HWL-AFQm-k-l Maintained NC HWL-A4FQm-k-l HW4L-A4FQm-k-l HWL-AFQm-k-l N-NC HWL-A4FQm-k-l HW4L-A4FQm-k-l HWL-AFQm-k-l N HWL-A4FQm-k-l HW4L-A4FQm-k-l HWL-AFQm-k-l Transformer Momentary Maintained N-NC HWL-M4Flm-k HW4L-M4Flm-k HWL-MFlm-k N HWL-M4Flm-k HW4L-M4Flm-k HWL-MFlm-k N-NC HWL-A4Flm-k HW4L-A4Flm-k HWL-AFlm-k N HWL-A4Flm-k HW4L-A4Flm-k HWL-AFlm-k Blocks. Full voltage and transformer units use the same operator.. In place of k, specify the Lens/LED Color Code from table. 3. In place of lspecify the Voltage Code from table. 4. In place of m specify Lamp Type Code from table. 5. Light independent of switch position 6. For nameplates and accessories, see page 63. and For dimensions, see page For contact assembly part numbers, see page Additional contact configurations available (up to 6 total contacts).. Yellow pushbutton comes with white LED. k Lens/LED Color Code Color Code Amber A Green G Red R Blue S White W Yellow Y*. *4mm mushroom lenses not available in yellow.. Yellow LED not available. Use white LED for yellow lens. l Voltage Code Full Voltage Models Transformer Models Voltage Code Voltage Code 6V AC/DC 6V V AC H V AC/DC V 4V AC M4 4V AC/DC 4V 48V AC T8 V AC (LED only) V 4V AC (LED only) 4V m Lamp Code Lamp Code Incandescent Blank LED D 6

20 ømm - HW Series Bezel : Round Plastic : Square Plastic 4: Round Metal Transformer* + Function M: Momentary A: Maintained Contact Blocks + Structure H W L M F Q D G V perator : Square Flush 4: Mushroom Lead Holder *Transformer not needed with full voltage models. Contact Arrangement : N Illumination Circuit : NC Q: Full Voltage : N-NC H: Transformer V AC : N M4: Transformer 4V AC T8: Transformer 48V AC Lens Color A: Amber S: Blue G: Green W: White R: Red Y: Yellow Lamp Code D: LED Blank: Incandescent Illuminated Mushroom & Square Pushbuttons (Replacement Parts) + Adaptor + Lamp Circuit Components Description s Lead Holder For use with HW-CBL on all illuminated pushbutton units. HW-LH3 ne required for each deck (pair) of contacts. Dummy Block with Full Voltage Adaptor Full Voltage Adaptor Transformer Unit (6V secondary voltage) For use with odd number of contacts. For use with even number of contacts. VAC 4VAC 48VAC V 4V 48V V 4V 48V Fingersafe Exposed Spring Up Fingersafe Exposed Fingersafe Spring Up Exposed HW-DAFB HW-DAB HW-GA TW-DAFB TW-DAB TW-F6B TW-F46B TW-F486B HW-T6 HW-T46 HW-L486 TW-T6B TW-T46B TW-T486B DC-DC Converter VDC HW-L6D perators ø4mm Mushroom Square HW-GA Dummy Block with full voltage adaptor does not require the use of HW-LH3. Plastic Bezel Metal Bezel Momentary HWL-ML HW4L-ML Maintained HWL-AL HW4L-AL Momentary Maintained HWL-M HWL-A Safety Lever Lock + Lamp + Anti-Rotation Ring + perator + Lens = Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw HW-F HW-FR HW-G HW-GR HW-C HW-CR Lamp Voltage (full voltage units only) 6V: 6V AC/DC V: V AC/DC 4V: 4V AC/DC V: VC AC* 4V: 4V AC* *LED only Completed Unit HW-F HW-FR HW-G HW-GR HW-C HW-CR. All assembled part numbers in catalog include standard fingersafe (HW-F...) contacts.. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R). 3. Units with exposed screw terminals (HW-C...) must be ordered as sub-components. Contact Block Mounting Adaptor HW-CBL. Used to mount contact blocks to operator (first pair only).. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. Safety Lever Lock Lenses ø4mm Mushroom Lens Square Flush HW9Z-LS ALW4BLU-k* HWA-L-k. In place of k, specify the Lens Color Code.. *Mushroom lens not available in yellow. Selector Switches -Position (Assembled) Anti-Rotation Ring Appearance HW9Z-RL Use with notched panel cutout to prevent unit rotation. Lamps Voltage 6V AC/DC LSTD-6k LED V AC/DC LSTD-k 4V AC/DC LSTD-k V AC LSTD-Hk 4V AC LSTD-M4k Incandescent 6V AC/DC V AC/DC 4V AC/DC IS-6 IS- IS-4. In place of k, specify the LED Color Code.. The LED contains a current-limiting resistor and reverse polarity protection diodes. 3. Yellow LED not available, use white LED when using yellow lens. Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 63

21 ømm - HW Series Signaling Lights Blocks -Position Selector Switches Contact Mounting perator nly perator Position N N- NC N N- NC 3 4 L R Handle Knob Lever Knob Lever Knob Lever Knob Lever Knob Lever Maintained Spring Return from Right L R L R HWnS-T HWnS-L HWnS-TF HWnS-LF HWnS-TF HWnS-LF HWnS-TF HWnS-LF HWnS-TF HWnS-LF HWnS-T HWnS-L HWnS-TF HWnS-LF HWnS-TF HWnS-LF HWnS-TF HWnS-LF HWnS-TF HWnS-LF. In place of n enter for plastic bezel or 4 for metal bezel.. For nameplates, see page All assembled part numbers in catalog include standard fingersafe (HW-F...) contacts. 4. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB- MF-R becomes HWB-M-R). 5. Units with exposed screw terminals (HW-C...) must be ordered as sub-components. 6. Standard color for knob and lever is black. 7. ptional colors available for lever type. Must order in components. See next page for part numbers. 8. Additional contact configurations available (up to 6 total contacts). 9. For Truth Tables see page 64. n Bezel Type Type Code Plastic Metal

22 ømm - HW Series Structure H W S - T F Bezel : Plastic # of Positions 4: Metal : -Position perator Handle blank: Maintained T: Knob : Spring Return L: Lever from Right Contact Arrangement : N : N-NC : N Selector Switches -Position (Replacement Parts) Anti-Rotation Contact Blocks + Mounting Adaptor + Safety Lever Lock + + perator = Completed Unit Ring Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw Dummy Block HW-F HW-FR HW-G HW-GR HW-C HW-CR Contact Block Mounting Adaptor HW-CBC TW-DB HW-F HW-FR HW-G HW-GR HW-C HW-CR. Used to mount contact blocks to operator (first pair only).. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. Safety Lever Lock HW9Z-LS Anti-Rotation Ring HW9Z-RL Use with notched panel cutout to prevent unit rotation. perators Description Handle Plastic Bezel Metal Bezel Maintained Spring Return from Right Knob HWS-T HW4S-T Lever HWS- HW4S- Knob HWS-T HW4S-T Lever HWS- HW4S-. Knob operator comes with black handle.. To order lever type, lever and inserts must be ordered separately, along with lever operator. See part numbers below. Levers & Inserts Lever Lever Color Insert ASWHHL-j TW-HC-j Standard lever color is black. Standard insert color is white. j Handle/Insert Color Code Color Code Black* B Blue S Green G Red R Yellow Y White W. * Lever color inserts not available in black.. Lever not available in white. Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 65

23 ømm - HW Series Selector Switches 3-Position (Assembled) Signaling Lights 3 Position Selector Switches Contact Mounting perator Position Handle Maintained L C R C L R Spring Return from Right L C R Spring Return from Left L C R Spring Return Two-Way L C R Blocks perator nly N- NC N NC N- NC N- NC N- NC 4N 4N 4NC Knob Lever Knob Lever Knob Lever Knob Lever HWnS-3T* HWnS-3L HWnS-3TF HWnS-3LF HWnS-3TF HWnS-3LF HWnS-3TF HWnS-3LF. In place of n enter for plastic bezel or 4 for metal bezel.. Knob operator includes black knob/lever operator includes black lever. 3. * Three position operator is available with three different cams. HWnS-3T: Maintained (standard cam) HWnS-3ST: Maintained (S cam) HWnS-3JT: Maintained (J cam) 4. perator cams are color coded (white=standard cam, red=s cam, black =J cam). 5. For nameplates, see page For contact assembly part numbers, see page 634 HWnS-3T HWnS-3L HWnS-3TF HWnS-3LF HWnS-3TF HWnS-3LF HWnS-3TF HWnS-3LF HWnS-3T HWnS-3L HWnS-3TF HWnS-3LF HWnS-3TF HWnS-3LF HWnS-3TF HWnS-3LF Knob HWnS-3JTFN HWnS-33T HWnS-33L HWnS-33TF HWnS-33LF HWnS-33TF HWnS-33LF HWnS-33TF HWnS-33LF Knob HWnS-3TF HWnS-3TF HWnS-3TF HWnS-33TF Knob HWnS-3STFN9 Knob HWnS-3TF4 HWnS-3TF4 HWnS-3TF4 HWnS-33TF4 Knob HWnS-3STF4N Knob HWnS-3TF4 HWnS-3TF4 HWnS-3TF4 HWnS-33TF4 n Bezel Type Type Code Plastic Metal 4 7. All assembled part numbers in catalog include standard fingersafe (HW-F...) contacts. 8. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R). 9. Units with exposed screw terminals (HW-C...) must be ordered as sub-components.. Standard color for knob and lever is black.. ptional colors available for lever type. Must order in components. See next page for part numbers.. Additional contact configurations available (up to 6 total contacts). 3. For Truth Tables see page

24 ømm - HW Series Structure H W S - 3 T F Bezel : Plastic # of Positions 4: Metal 3: 3-Position perator Handle blank: Maintained T: Knob : Spring Return from Right L: Lever : Spring Return from Left 3: Spring Return Two Way Contact Arrangement : N-NC : N : N-NC : N-NC 4: 4N 4: 4NC Selector Switches 3-Position (Replacement Parts) Anti-Rotation Contact Blocks + Mounting Adaptor + Safety Lever Lock + + perator = Completed Unit Ring Contact Blocks Contacts N NC Standard HW-F HW-F Fingersafe HW-FR HW-FR (IP) Spring-Up Exposed Screw Dummy Block HW-G HW-GR HW-C HW-CR Contact Block Mounting Adaptor HW-CBC TW-DB HW-G HW-GR HW-C HW-CR. Used to mount contact blocks to operator (first pair only).. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. Safety Lever Lock HW9Z-LS Anti-Rotation Ring HW9Z-RL Use with notched panel cutout to prevent unit rotation. perators Description Handle Plastic Bezel Metal Bezel Maintained Knob HWS-3T HW4S-3T (standard cam) Lever HWS-3 HW4S-3 Maintained (S cam) Knob HWS-3ST HW4S-3ST Maintained (J cam) Knob HWS-3JT HW4S-3JT Spring Return from Knob HWS-3T HW4S-3T Right (standard cam) Lever HWS-3 HW4S-3 Spring Return from Knob HWS-3T HW4S-3T Left (standard cam) Lever HWS-3 HW4S-3 -Way Spring Return Knob HWS-33T HW4S-33T (standard cam) Lever HWS-33 HW4S-33. Knob operator comes with black handle.. Three position knob operator is available with three different cams. 3. perator cams are color coded (white=standard cam, red=s cam, black =J cam). 4. To order lever type, lever and inserts must be ordered separately, along with lever operator. See part numbers below. Levers & Inserts Lever Lever Color Insert ASWHHL-j TW-HC-j Standard lever color is black. Standard insert color is white. j Handle/Insert Color Code Color Code Color Code Black* Blue Green B S G Red Yellow White R Y W. * Lever color inserts not available in black.. Lever not available in white. Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 67

25 ømm - HW Series Selector Switches 4- & 5-Position (Assembled) Signaling Lights 4-Position Selector Switches Blocks Contact Mounting perator nly N- NC N- 3NC N- NC perator Position Handle Maintained 3 4 Knob Lever Knob Lever Knob Lever Knob Lever HWnS-4T HWnS-4L 3 HWnS-4TF HWnS-4LF 4 HWnS-4TF3N6 HWnS-4LF3N6 HWnS-4TFN3 HWnS-4LFN3 5-Position Selector Switch perator Position Handle Maintained Contact Mounting perator nly N- NC Knob Lever Knob Lever 3 HWnS-5T HWnS-5L 4 5 HWnS-5TFN3 HWnS-5LFN3. In place of n enter for plastic bezel or 4 for metal bezel.. Knob operator includes black knob/lever operator includes black lever. 3. For nameplates, see page For contact assembly part numbers, see page Five position circuit cannot be made to make five independent contact closures. 6. All assembled part numbers in catalog include standard fingersafe (HW-F...) contacts. 7. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R). 8. Units with exposed screw terminals (HW-C...) must be ordered as sub-components. 9. Standard color for knob and lever is black.. ptional colors available for lever type. Must order in components. See next page for part numbers.. Additional contact configurations available (up to 6 total contacts).. For Truth Tables see page 64. n Bezel Type Type Code Plastic Metal

26 ømm - HW Series Bezel : Plastic 4: Metal # of Positions 4: 4-Position 5: 5-Position Structure H W S - 4 T F 3N6 Handle T: Knob L: Lever Contact Arrangement (based on desired truth table) : N-NC 3N6: N-3NC N3: N-NC Selector Switches 4- & 5-Position (Replacement Parts) Anti-Rotation Contact Blocks + Mounting Adaptor + Safety Lever Lock + + perator = Completed Unit Ring Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw Dummy Block HW-F HW-FR HW-G HW-GR HW-C HW-CR Contact Block Mounting Adaptor HW-CBC TW-DB HW-F HW-FR HW-G HW-GR HW-C HW-CR. Used to mount contact blocks to operator (first pair only).. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. Safety Lever Lock HW9Z-LS Anti-Rotation Ring HW9Z-RL Use with notched panel cutout to prevent unit rotation. perators Position Description Handle Plastic Bezel Metal Bezel 4 Maintained 5 Maintained Knob HWS-4T HW4S-4T Lever HWS-4 HW4S-4 Knob HWS-5T HW4S-5T Lever HWS-5 HW4S-5. Knob operator comes with black handle.. To order lever type, lever and inserts must be ordered separately, along with lever operator. See part numbers below. Levers & Inserts Lever Lever Color Insert ASWHHL-j TW-HC-j Standard lever color is black. Standard insert color is white. j Handle/Insert Color Code Color Code Black* B Blue S Green G Red R Yellow Y White W. * Lever color inserts not available in black.. Lever not available in white. Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 69

27 ømm - HW Series Key Switches -Position (Assembled) Signaling Lights -Position Key Switches Blocks Contact Mounting perator Position L R Maintained Spring Return from Right L R L R perator nly HWnK-A HWnK-B N HWnK-AF HWnK-BF N- NC N N- NC 3 4 HWnK-AF HWnK-AF HWnK-AF HWnK-BF HWnK-BF HWnK-BF. In place of n enter for plastic bezel or 4 for metal bezel.. Key is removable in all maintained positions. ther key removable options available. 3. Two keys are supplied with all switches. 4. All standard operators are keyed alike. 5. ther key removable options available. See table below 6. For nameplates, see page For contact assembly part numbers, see page Key is retained in Spring Return position. 9. All assembled part numbers in catalog include standard fingersafe (HW-F...) contacts.. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R).. Units with exposed screw terminals (HW-C...) must be ordered as sub-components.. Additional contact configurations available (up to 6 total contacts). 3. For Truth Tables see page 634. Key Removable ption Codes Code Description A Key not retained in any position (removable in all positions) B Key retained in right position only C Key retained in left position only n Bezel Type Type Code Plastic Metal 4 6

28 ømm - HW Series Bezel : Plastic 4: Metal # of Positions : -Position Structure H W K - B F perator blank: Maintained : Spring Return from Right Contact Arrangement : N : N : N-NC : N-NC Key Retained Position A: Key not retained in any position (removable in all positions) B: Key retained in right position only C: Key retained in left position only Key Switches -Position (Replacement Parts) Anti-Rotation Contact Assembly + Mounting Adaptor + Safety Lever Lock + + perator = Completed Unit Ring Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw Dummy Block HW-F HW-FR HW-G HW-GR HW-C HW-CR Contact Block Mounting Adaptor HW-CBC. Used to mount contact blocks to operator (first pair only).. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. TW-DB HW-F HW-FR HW-G HW-GR HW-C HW-CR Safety Lever Lock HW9Z-LS Anti-Rotation Ring HW9Z-RL Use with notched panel cutout to prevent unit rotation. perators Description Plastic Bezel Metal Bezel Maintained HWK-A HW4K-A Maintained, key removed left only HWK-B HW4K-B Spring Return from Right HWK-B HW4K-B Maintained, key removed right only. perator includes two keys.. All standard operators are keyed alike. HWK-C HW4K-C Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 6

29 ømm - HW Series Key Switches 3-Position (Assembled) Blocks Signaling Lights 3-Position Key Switches Contact Mounting perator Position L C R Maintained L C R Spring Return from Right L C R Spring Return from Left L C R Spring Return Two Way perator nly HWnK-3A* HWnK-3B HWnK-3C HWnK-33D N- NC N NC N- NC N- NC N- NC 4N 4N 4NC In place of n enter for plastic bezel or 4 for metal bezel.. Key is removable in all maintained positions. ther key removable options available. 3. Two keys are supplied with all switches. 4. All standard operators are keyed alike. 5. ther key removable options available. See table to the right. 6. * perator is available with three different cams. HWnK-3A: Maintained (standard cam) HWnK-3SA: Maintained (Cam S) HWnK-3JA: Maintained (Cam J) 7. For nameplates, see page 63. HWnK-3AF HWnK-3BF HWnK-3CF HWnK-33DF HWnK-3AF HWnK-3BF HWnK-3CF HWnK-33DF HWnK-3AF HWnK-3BF HWnK-3CF HWnK-33DF HWnK-3JAFN HWnK-3AF HWnK-3BF HWnK-3CF HWnK-33DF HWnK-3SAFN9 HWnK-3AF4 HWnK-3BF4 HWnK-3CF4 HWnK-33DF4 HWnK-3SAF4N HWnK-3AF4 HWnK-3BF4 HWnK-3CF4 HWnK-33DF4 8. For contact assembly part numbers, see page All assembled part numbers in catalog include standard fingersafe (HW-F...) contacts.. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M- R).. Units with exposed screw terminals (HW-C...) must be ordered as sub-components.. Additional contact configurations available (up to 6 total contacts). 3. For Truth Tables see page 64. L C R n Bezel Type Type Code Plastic Metal 4 Key Removable ption Codes Code Description A Key not retained in any position (removable in all positions) B Key retained in right position only C Key retained in left position only D Key retained in left and right (3 position only) E Key retained in center only (3 position only) G Key retained right and center (3 position only) H Key retained left and center (3 position only) 6

30 ømm - HW Series Bezel : Plastic 4: Metal # of Positions 3: 3-Position Structure H W K - 3 B F perator blank: Maintained : Spring Return from Right : Spring Return from Left 3: Spring Return Two Way Contact Arrangement : N-NC 4: 4N : N 4: 4NC : N-NC Key Removable ption Code (see chart on previous page) Key Switches 3-Position (Replacement Parts) Anti-Rotation Contact Assembly + Mounting Adaptor + Safety Lever Lock + + perator = Completed Unit Ring Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw Dummy Block HW-F HW-FR HW-G HW-GR HW-C HW-CR Contact Block Mounting Adaptor HW-CBC. Used to mount contact blocks to operator (first pair only).. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. TW-DB HW-F HW-FR HW-G HW-GR HW-C HW-CR Safety Lever Lock HW9Z-LS Anti-Rotation Ring HW9Z-RL Use with notched panel cutout to prevent unit rotation. perators Description Plastic Bezel Metal Bezel Maintained (standard cam) HWK-3A HW4K-3A Maintained (S cam) HWK-3SA HW4K-3SA Maintained (J cam) HWK-3JA HW4K-3JA Spring Return from Right (standard cam) HWK-3B HW4K-3B Spring Return from Left (standard cam) HWK-3C HW4K-3C -Way Spring Return (standard cam) HWK-33D HW4K-33D. perator includes two keys.. All standard operators are keyed alike. 3. ther key removable options available. See table on previous page. 4. Key not removable from spring-returned position Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 63

31 ømm - HW Series Illuminated Selector Switches -Position (Assembled) Signaling Lights -Position Illuminated Selector Switches Contact Mounting perator Position L R Type Maintained Spring Return from Right L R L R perator nly HWnF-k HWnF-k N- NC N N- NC 3 4 Full Voltage HWnF-FQm-k-l HWnF-FQm-k-l Transformer V 4V 48V HWnF-FHm-k HWnF-FM4m-k HWnF-FT8m-k HWnF-FHm-k HWnF-FM4m-k HWnF-FT8m-k Full Voltage HWnF-FQm-k-l HWnF-FQm-k-l Transformer V 4V 48V HWnF-FHm-k HWnF-FM4m-k HWnF-FT8m-k HWnF-FHm-k HWnF-FM4m-k HWnF-FT8m-k Full Voltage HWnF-FQm-k-l HWnF-FQm-k-l Transformer V 4V 48V HWnF-FHm-k HWnF-FM4m-k HWnF-FT8m-k HWnF-FHm-k HWnF-FM4m-k HWnF-FT8m-k Blocks. In place of k specify Lens/LED color code.. In place of l specify Full Voltage code. 3. In place of m specify Lamp code. 4. In place of n enter for plastic bezel or 4 for metal bezel. 5. For nameplates, see page For contact assembly part numbers, see page Light is independent of switch position. 8. All assembled part numbers in catalog include standard fingersafe (HW-F...) contacts. 9. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R).. Units with exposed screw terminals (HW-C...) must be ordered as sub-components.. Yellow selector switch comes with white LED.. Additional contact configurations available (up to 6 total contacts). 3. For Truth Tables see page 64. k Lens/LED Color Code Color Code Amber A Green G Red R Blue S White W Yellow Y l Full Voltage Code Full Voltage Models Voltage Code 6VAC/DC 6V VAC/DC V 4VAC/DC 4V V AC (LED only) V 4V AC (LED only) 4V m Lamp Code Lamp Code Incandescent Blank LED D n Bezel Code Type Code Plastic Metal

32 ømm - HW Series Bezel : Plastic 4: Metal Transformer* + Position : Maintained : Spring Return from Right Contact Blocks + Structure H W F F Q D G 4V Contact Arrangement : N-NC Illumination Circuit : N Q: Full Voltage : N-NC H: Transformer V AC M4: Transformer 4V AC T8: Tranformer 48V AC Lead Holder *Transformer not needed with full voltage models. Lamp Circuit Components Description s Lead Holder Dummy Block with Full Voltage Adaptor Full Voltage Adaptor Transformer Unit (6V secondary voltage) For use with HW-CBL on all illuminated pushbutton units. ne required for each deck (pair) of contacts. For use with odd number of contacts. For use with even number of contacts. VAC 4VAC 48VAC V 4V 48V V 4V 48V Lens Color A: Amber S: Blue G: Green W: White R: Red Y: Yellow Lamp Code D: LED Blank: Incandescent Illuminated Selector Switches -Position (Replacement Parts) + Fingersafe Exposed Spring Up Fingersafe Exposed Fingersafe Spring Up Exposed Mounting Adaptor + Part Number HW-LH3 HW-DAFB HW-DAB HW-GA TW-DAFB TW-DAB TW-F6B TW-F46B TW-F486B HW-T6 HW-T46 HW-L486 TW-T6B TW-T46B TW-T486B DC-DC Converter VDC HW-L6D. HW-GA Dummy Block with full voltage adaptor does not require the use of HW-LH3.. DC-DC convertor features spring-up terminals. 3. DC-DC convertor applicable voltage range 9-4V DC. perators Plastic Description Metal Bezel Bezel Maintained HWF- HW4F- Spring return from right HWF- Illuminated knobs must be ordered separately. HW4F- Safety Lever Lock + Lamp + Anti-Rotation Ring Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw Contact Block Mounting Adaptor HW-CBL. Used to mount contact blocks to operator (first pair only).. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. Safety Lever Lock HW9Z-LS Illuminated Knob Appearance HW9Z-FDY-k In place of k, specify the Color Code. Lamp Voltage (Full voltage units only) 6V: 6V AC/DC V: V AC/DC 4V: 4V AC/DC V: V AC* 4V: 4V AC* *LED only + perator + Lens = Completed Unit HW-F HW-FR HW-G HW-GR HW-C HW-CR HW-F HW-FR HW-G HW-GR HW-C HW-CR k Lens/LED Color Code Color Code Color Code Amber A Blue S Green G White W Red R Yellow Y Anti-Rotation Ring HW9Z-RL Use with notched panel cutout to prevent unit rotation. Lamps Voltage 6V AC/DC LSTD-6k LED V AC/DC LSTD-k 4V AC/DC LSTD-k V AC LSTD-Hk 4V AC LSTD-M4k Incandescent 6V AC/DC V AC/DC 4V AC/DC IS-6 IS- IS-4. In place of k, specify the LED Color Code.. The LED contains a current-limiting resistor and reverse polarity protection diodes. 3. Use white LED for yellow lens. Yellow LED not available. Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 65

33 ømm - HW Series Illuminated Selector Switches 3-Position (Assembled) Blocks Signaling Lights 3-Position Illuminated Selector Switches Contact Mounting perator Position Type Maintained L C R L C R Spring Return from Right L C R Spring Return from Left L C R Spring Return Two- Way perator nly HWnF-3k HWnF-3k HWnF-3k HWnF-33k N- NC N NC N- NC 4N 4NC Full Voltage HWnF-3FQm-k-l HWnF-3FQm-k-l HWnF-3FQm-k-l HWnF-33FQm-k-l Transformer V 4V 48V HWnF-3FHm-k HWnF-3FM4m-k HWnF-3FT8m-k HWnF-3FHm-k HWnF-3FM4m-k HWnF-3FT8m-k HWnF-3FHm-k HWnF-3FM4m-k HWnF-3FT8m-k L C R HWnF-33FHm-k HWnF-33FM4m-k HWnF-33FT8m-k Full Voltage HWnF-3FQm-k-l HWnF-3FQm-k-l HWnF-3FQm-k-l HWnF-33FQm-k-l Transformer V 4V 48V HWnF-3FHm-k HWnF-3FM4m-k HWnF-3FT8m-k HWnF-3FHm-k HWnF-3FM4m-k HWnF-3FT8m-k HWnF-3FHm-k HWnF-3FM4m-k HWnF-3FT8m-k HWnF-33FHm-k HWnF-33FM4m-k HWnF-33FT8m-k Full Voltage HWnF-3FQm-k-l HWnF-3FQm-k-l HWnF-3FQm-k-l HWnF-33FQm-k-l Transformer V 4V 48V HWnF-3FHm-k HWnF-3FM4m-k HWnF-3FT8m-k HWnF-3FHm-k HWnF-3FM4m-k HWnF-3FT8m-k HWnF-3FHm-k HWnF-3FM4m-k HWnF-3FT8m-k HWnF-33FHm-k HWnF-33FM4m-k HWnF-33FT8m-k Full Voltage HWnF-3FQm-k-l HWnF-3FQm-k-l HWnF-3FQm-k-l HWnF-33FQm-k-l Transformer V 4V 48V HWnF-3FHm-k HWnF-3FM4m-k HWnF-3FT8m-k HWnF-3FHm-k HWnF-3FM4m-k HWnF-3FT8m-k HWnF-3FHm-k HWnF-3FM4m-k HWnF-3FT8m-k HWnF-33FHm-k HWnF-33FM4m-k HWnF-33FT8m-k Full Voltage HWnF-3F4Qm-k-l HWnF-3F4Qm-k-l HWnF-3F4Qm-k-l HWnF-33F4Qm-k-l Transformer V 4V 48V HWnF-3F4Hm-k HWnF-3F4M4m-k HWnF-3F4T8m-k HWnF-3F4Hm-k HWnF-3F4M4m-k HWnF-3F4T8m-k HWnF-3F4Hm-k HWnF-3F4M4m-k HWnF-3F4T8m-k HWnF-33F4Hm-k HWnF-33F4M4m-k HWnF-33F4T8m-k Full Voltage HWnF-3F4Qm-k-l HWnF-3F4Qm-k-l HWnF-3F4Qm-k-l HWnF-33F4Qm-k-l Transformer. In place of k specify Lens/LED color code.. In place of l specify Full Voltage code. 3. In place of m specify Lamp code. 4. In place of n enter for plastic bezel or 4 for metal bezel. 5. For nameplates, see page For contact assembly part numbers, see page Light is independent of switch position. 8. All assembled part numbers in catalog include standard fingersafe (HW-F...) contacts. V 4V 48V HWnF-3F4Hm-k HWnF-3F4M4m-k HWnF-3F4T8m-k 9. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R).. Units with exposed screw terminals (HW-C...) must be ordered as subcomponents.. Yellow selector switch comes with white LED.. Additional contact configurations available (up to 6 total contacts). 3. For Truth Tables see page 64. HWnF-3F4Hm-k HWnF-3F4M4m-k HWnF-3F4T8m-k k Lens/LED Color Color Code Amber A Green G Red R Blue S White W Yellow Y HWnF-3F4Hm-k HWnF-3F4M4m-k HWnF-3F4T8m-k l Full Voltage Code Full Voltage Models Voltage Code 6VAC/DC 6V VAC/DC V 4VAC/DC 4V V AC (LED only) V 4V AC (LED only) 4V HWnF-33F4Hm-k HWnF-33F4M4m-k HWnF-33F4T8m-k m Lamp Code Lamp Code Incandescent Blank LED D n Bezel Code Type Code Plastic Metal

34 ømm - HW Series Bezel : Plastic 4: Metal Transformer* + Position 3: Maintained Contact Arrangement 3: Spring Return from Right 3: Spring Return from Left 33: Spring Return -Way : N-NC : N : NC : N-NC 4: 4N 4: 4NC Contact Blocks + Lead Holder *Transformer not needed with full voltage models. Lamp Circuit Components Description s Lead Holder Dummy Block with Full Voltage Adaptor Full Voltage Adaptor Transformer Unit (6V secondary voltage) For use with HW-CBL on all illuminated pushbutton units. ne required for each deck (pair) of contacts. For use with odd number of contacts. For use with even number of contacts. VAC 4VAC 48VAC V 4V 48V V 4V 48V Structure H W F 3 F Q D G 4V Illumination Circuit Q: Full Voltage H: Transformer V AC M4: Transformer 4V AC T8: Tranformer 48V AC Lens Color A: Amber S: Blue G: Green W: White R: Red Y: Yellow Lamp Code D: LED Blank: Incandescent Illuminated Selector Switches 3-Position (Replacement Parts) + Fingersafe Exposed Spring Up Fingersafe Exposed Fingersafe Spring Up Exposed Mounting Adaptor + Part Number HW-LH3 HW-DAFB HW-DAB HW-GA TW-DAFB TW-DAB TW-F6B TW-F46B TW-F486B HW-T6 HW-T46 HW-L486 TW-T6B TW-T46B TW-T486B DC-DC Converter VDC HW-L6D. HW-GA Dummy Block with full voltage adaptor does not require the use of HW-LH3.. DC-DC convertor features spring-up terminals. 3. DC-DC convertor applicable voltage range 9-4V DC. perators Description Plastic Bezel Metal Bezel Maintained HWF-3 HW4F-3 Spring return from right HWF-3 HW4F-3 Spring return from left HWF-3 HW4F-3 -Way spring return HWF-33 HW4F-33 Illuminated knobs must be ordered separately. Safety Lever Lock + Lamp + Anti-Rotation Ring Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw Contact Block Mounting Adaptor HW-CBL. Used to mount contact blocks to operator (first pair only).. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. Safety Lever Lock HW9Z-LS Illuminated Knob Appearance HW9Z-FDY-k In place of k, specify the Color Code. Full Voltage Code 6V: 6V AC/DC V: V AC/DC 4V: 4V AC/DC V: V AC* 4V: 4V AC* *LED only + perator + Lens = Completed Unit HW-F HW-FR HW-G HW-GR HW-C HW-CR HW-F HW-FR HW-G HW-GR HW-C HW-CR k Lens/LED Color Code Color Code Color Code Amber A Blue S Green G White W Red R Yellow Y Anti-Rotation Ring HW9Z-RL Use with notched panel cutout to prevent unit rotation. Lamps Voltage 6V AC/DC LSTD-6k LED V AC/DC LSTD-k 4V AC/DC LSTD-k V AC LSTD-Hk 4V AC LSTD-M4k Incandescent 6V AC/DC V AC/DC 4V AC/DC IS-6 IS- IS-4. In place of k, specify the LED Color Code.. The LED contains a current-limiting resistor and reverse polarity protection diodes. 3. Use white LED for yellow lens. Yellow LED not available. Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 67

35 ømm - HW Series Mono Lever Switches -Position (Assembled) Signaling Lights -Position Mono Lever Switches Description HWM-F- Maintained up and down HWM-F- Spring return up and down HWM-F-4 Maintained up and down HWM HWM-F-4 Spring return up and down Standard Lever HWM-F- Maintained right and left HWM-F- Spring return right and left HWM-F-4 Maintained right and left HWM-F-4 Spring return right and left HWM-LF- Maintained up and down HWM-LF- Spring return up and down HWM-LF-4 Maintained up and down HWM-L HWM-LF-4 Spring return up and down Interlocking Lever HWM-LF- Maintained right and left HWM-LF- Spring return right and left HWM-LF-4 Maintained right and left HWM-LF-4 Spring return right and left. All assembled part numbers in catalog include standard (HW-F...) contacts.. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R). 3. Units with exposed screw terminals (HW-C...) must be ordered as sub-components. 4. Additional contact configurations available (up to 6 total contacts). Circuit Diagrams Position Left/Right Circuit Number 4 Contact Mounting Position No. Left Center Right HW-F HW-F HW-F HW-F 3 HW-F 4 HW-F Position Up/Down Circuit Contact Mounting Position Number No. Down Center Up HW-F HW-F HW-F 4 HW-F 3 HW-F 4 HW-F Blocks 68

36 ømm - HW Series Type blank: Standard L: Interlocking Contact Assembly + Mounting Adaptor + Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw Dummy Block HW-F HW-FR HW-G HW-GR HW-C HW-CR Contact Block Mounting Adaptor HW-CBC Structure H W M - L F up right down left Lever Action : Maintained : Spring : Blocked Mono Lever Switches -Position (Sub-assembled) s TW-DB HW-F HW-FR HW-G HW-GR HW-C HW-CR. Used to mount contact blocks to operator (first pair only).. IDEC strongly recommends using the safety lever lock (included) to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. Safety Lever Lock HW9Z-LS Safety Lever Lock + Anti-Rotation Ring Anti-Rotation Ring Circuit Number or 4 (see contact arrangement on previous page) + perator = Completed Unit HW9Z-RL Use with notched panel cutout to prevent unit rotation. perators Description Standard Maintained Up/Down HWM- Spring return Up/Down HWM- Maintained Left/Right HWM- Spring return Left/Right HWM- Interlocking Maintained Up/Down HWM-L Spring return Up/Down HWM-L Maintained Left/Right HWM-L Replacement Parts Item Black Cap Boot HW9Z-CPM Spring return Left/Right HW9Z-BLM (fits standard operator only) HWM-L Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 69

37 ømm - HW Series Mono Lever Switches 3- & 4-Position (Assembled) Signaling Lights 3-Position Description HWM Standard Lever HWM-L Interlocking Lever HWM-F-3 HWM-F-3 HWM-LF-3 HWM-LF-3 Maintained right and left, spring return down Spring return right, down, left Maintained right and left, spring return down Spring return right, down, left Circuit Diagram Circuit Contact Mounting Position Number No. Down Left Center Up Right HW-F 3 HW-F 3 HW-F 4-Position Description HWM-F-N9 Maintained all positions HWM Standard Lever HWM-L Interlocking Lever HWM-F-N9 HWM--N9 HWM--N9 HWM-LF-N9 HWM-LF-N9 HWM-LF-N9 HWM-LF-N9 Maintained up and down, spring left and right Spring up and down, maintained left and right Spring return all positions Maintained all positions Maintained up and down, spring left and right Spring up and down, maintained left and right Spring return all positions Circuit Diagram Circuit Contact Mounting Position Number No. Down Left Center Up Right HW-F N9 HW-F 3 HW-F 4 HW-F. All assembled part numbers in catalog include standard (HW-F...) contacts.. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R). 3. Units with exposed screw terminals (HW-C...) must be ordered as sub-components. 4. Additional contact configurations available (up to 6 total contacts). Blocks 6

38 ømm - HW Series Type blank: Standard L: Interlocking Contact Assembly + Mounting Adaptor + Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw Dummy Block HW-F HW-FR HW-G HW-GR HW-C HW-CR Contact Block Mounting Adaptor HW-CBC Structure H W M - L F 3 up right down left Lever Action : Maintained : Spring : Blocked Mono Lever Switches 3 & 4-Position (Sub-assembled) s TW-DB HW-F HW-FR HW-G HW-GR HW-C HW-CR. Used to mount contact blocks to operator (first pair only).. IDEC strongly recommends using the safety lever lock (included) to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. Safety Lever Lock HW9Z-LS Safety Lever Lock + Anti-Rotation Ring Anti-Rotation Ring Circuit Number 3 Position: 3 4 Position: N9 + perator = Completed Unit HW9Z-RL Use with notched panel cutout to prevent unit rotation. perators Description Standard Interlocking Replacement Parts Item Black Cap Boot HW9Z-CPM Combination, 3 position Spring return, 3 position Maintained, 4 position Combination, 4 position Combination, 4 position Spring return, 4 position Combination, 3 position Spring return, 3 position Maintained, 4 position Combination, 4 position Combination, 4 position Spring return, 4 position HW9Z-BLM (fits standard operator only) HWM- HWM- HWM- HWM- HWM- HWM- HWM-L HWM-L HWM-L HWM-L HWM-L HWM-L Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 6

39 ømm - HW Series Pushbutton Selectors (Assembled) Blocks Signaling Lights -Position Pushbutton Selectors Left perator Position Right Cam Contacts Mounting Normal Push Normal Push A D E F N T perator nly N-NC N N-NC perator nly N N-NC perator nly N-NC perator nly N-NC perator nly N-NC perator nly N-NC HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F HW-F Blocked HWR-A-j HWR-AF-j HWR-AF-j HWR-AF-j HWR-D-j HWR-DF-j HWR-DFN-j HWR-E-j HWR-EFN-j HWR-F-j HWR-FFN-j HWR-N-j HWR-NFN-j HWR-T-j HWR-TFN-j j Button Color Code Color Code Color Code Black B White W Green G Yellow Y Red R Gray N Blue S. All assembled part numbers in catalog include standard (HW-F...) contacts.. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R). 3. Units with exposed screw terminals (HW-C...) must be ordered as sub-components. 4. perator only models come with operator and button. 5. Additional contact configurations available (up to 6 total contacts). 6

40 ømm - HW Series perator A: Cam A D: Cam D E: Cam E F: Cam F N: Cam N T: Cam T Contact Blocks + Mounting Adaptor + Contact Blocks Contacts N NC Standard Fingersafe (IP) Spring-Up Exposed Screw Dummy Block HW-F HW-FR HW-G HW-GR HW-C HW-CR Contact Block Mounting Adaptor (safety lever lock included) HW-CBC TW-DB HW-F Structure H W R - D F N R Contact Arrangement Code : N-NC : N (For additional contact codes see previous page) Pushbutton Selectors (Sub-assembled) Safety Lever Lock HW-FR HW-G HW-GR HW-C HW-CR. Used to mount contact blocks to operator (first pair only).. IDEC strongly recommends using the safety lever lock (included) to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. + Anti-Rotation Ring Safety Lever Lock HW9Z-LS Anti-Rotation Ring perators Button Colors B: Black G: Green R: Red S: Blue W: White Y: Yellow N: Gray + perator + Button = Completed Unit HW9Z-RL Use with notched panel cutout to prevent unit rotation. Description Cam A Cam D Cam E Cam F Cam N Cam T Part Number HWR-A HWR-D HWR-E HWR-F HWR-N HWR-T Buttons Round Flush HWA-B-j In place of j, specify the Button Color Code from table below. j Button Color Code Color Code Color Code Black B White W Green G Yellow Y Red R Gray N Blue S Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 63

41 ømm - HW Series Signaling Lights Key features: Two pushbuttons and a pilot light are integrated into one spacesaving ø mm control unit. Momentary and interlock types are available for pushbuttons. Interlock type prevents both buttons from being pressed at the same time. Pilot lights are available in full voltage and transformer with LED or incandescent lamps. IP4 protection, IP65 when using silicon cover. UL Listed, CSA approved, and EN compliant Applications: Ideal for use as power switches and start/stop switches (available with I/N and /FF markings on the buttons and a pilot light in the center). Interlock type prevents two pushbuttons from being pressed at the same time. Dual Pushbutton Switches Dual Pushbutton Switches (Assembled) s Without Center Pilot Light peration Type Button Contact Arrangement Top Button Bottom Button mbutton Color Code nlegend Code N NC HW7D-BF-mn Flush (top) Flush (bottom) N N HW7D-BF-mn N-NC N-NC HW7D-BF-mn N NC HW7D-BF-mn Momentary N N HW7D-BF-mn N NC HW7D-BF-mn Flush (top) Extended (bottom) Flush (top) Flush (bottom) N N HW7D-BF-mn N-NC N-NC HW7D-BF-mn N NC HW7D-BF-mn N N HW7D-BF-mn N NC HW7D-BF-mn N N HW7D-BF-mn N-NC N-NC HW7D-BF-mn N NC HW7D-BF-mn GR: Green (top) Red (bottom) WB: White (top) Black (bottom) Blank: Without legend : I/N (top) /FF (bottom) Blocks Interlock* Flush (top) Extended (bottom) N N HW7D-BF-mn N NC HW7D-BF-mn N N HW7D-BF-mn N-NC N-NC HW7D-BF-mn N NC HW7D-BF-mn N N HW7D-BF-mn. *Interlock type prevents both top and bottom buttons from being pressed simultaneously.. Clear silicon rubber cover part number HW9Z-D7D. 3. Additional contact configurations available (up to 6 total contacts). 64

42 ømm - HW Series With Center Pilot Light peration Type Momentary Interlock* Button Top Button Bottom Button Flush (Top) Flush (Bottom) Flush (Top) Extended (Bottom) Flush (Top) Flush (Bottom) Flush (Top) Extended (Bottom) Flush (top) Flush (bottom) Flush (top) Extended (bottom). *Interlock type prevents both top and bottom buttons from being pressed simultaneously.. Clear silicon rubber cover part number HW9Z-D7D. 3. All assembled part numbers in catalog include standard (HW-F...) contacts. 4. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an F from the part number (Ex. HWB-MF-R becomes HWB-M-R). 5. Units with exposed screw terminals (HW-C...) must be ordered as sub-components. kpilot Light Illumination & Voltage Code Full Voltage Voltage Code 6V AC/DC, LED Q V AC/DC, LED Q3 4V AC/DC, LED Q4 V AC, LED Q8 6V AC/DC, Incandescent Q5* V AC/DC, Incandescent Q6* 4V AC/DC, Incandescent Q7* Step-Down Transformer (6V Secondary Lamp Voltage) Voltage Code V AC, LED H 4V AC, LED M4 48V AC, LED T8 V AC, Incandescent H5* 4V AC, Incandescent M45* 48V AC, Incandescent T85* *nly available for White Lens Pilot Lamp. l Pilot Lamp Color Code Color Code Amber A* Green G* Red R* Blue S* White W *nly available in LED illumination. N NC HW7D-LFkl-mn N N HW7D-LFkl-mn N-NC N-NC HW7D-LFkl-mn N NC HW7D-LFkl-mn N N HW7D-LFkl-mn N NC HW7D-LFkl-mn N N HW7D-LFkl-mn N-NC N-NC HW7D-LFkl-mn N NC HW7D-LFkl-mn N N HW7D-LFkl-mn N NC HW7D-LFkl-mn N N HW7D-LFkl-mn N-NC N-NC HW7D-LFkl-mn N NC HW7D-LFkl-mn N N HW7D-LFkl-mn N NC HW7D-LFkl-mn N N HW7D-LFkl-mn N-NC N-NC HW7D-LFkl-mn N NC HW7D-LFkl-mn N N HW7D-LFkl-mn mpushbutton Color Code Color Code Top Green Bottom Red GR Top White Bottom Black WB nengraving Codes Engraving Code No Engraving Blank I/N Top /FF Bottom Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 65

43 ømm - HW Series Signaling Lights Pilot Light B: Without Center Pilot Light L: With Center Pilot Light Button Arrangement : Momentary (Flush/Flush) : Momentary (Flush/Extended) : Interlock (Flush/Flush) : Interlock (Flush/Extended) Structure H W 7 D L F H R GR Contact Arrangement Top Button : NC : NC : N : N Bottom Button : NC : NC : N : N Voltage Code Pilot Lamp Color blank: without center pilot light A: Amber* Y: Yellow* Full Voltage* Transformer* G: Green* blank: without Q: 6V LED H: V AC LED R: Red* S: Blue* W: White center pilot light *For additional voltage codes, please see previous page *nly available in LED illumination. Dual Pushbutton Switches (Sub-assembled) s Safety Lever Contact Blocks + Mounting Adaptor + + perator + Lens = Completed Unit Lock Engraving Code blank: No Engraving : Top: I/N Bottom: /FF Pushbutton Color GR: Top: Green Bottom: Red WB: Top: White Bottom: Black Blocks Lamp Circuit Components with Fingersafe s Description Part Number For use with HW-CBL Lead Holder on all illuminated pushbutton units. ne HW-LH3 required for each deck (pair) of contacts. Dummy Block with Full Voltage Adaptor Full Voltage Adaptor Transformer Unit (6V secondary voltage) For use with odd number of contacts. For use with even number of contacts. VAC 4VAC 48VAC Exposed and spring up terminals also available. perators Button Flush (top) Flush (bottom) HW7D-*m-n Flush (top) Extended (bottom) HW7D-*m-n Momentary Interlock Flush (top) Flush (bottom) Flush (top) Extended (bottom) HW7D-*m-n HW7D-*m-n mpushbutton Color Code Color Code Color Code Top Green Top White GR WB Bottom Red Bottom Black HW-DAFB TW-DAFB TW-F6B TW-F46B TW-F486B Instead of * insert: B: Non-illuminated L: Illuminated Contact Blocks Contacts N NC Contacts N NC Standard Fingersafe (IP) Dummy Block HW-F HW-FR HW-F HW-FR TW-DB Contact Block Mounting Adaptor Non-illuminated Illuminated (with Pilot Light) HW-CBC HW-CBL. Used to mount contact blocks to operator (first pair only).. IDEC strongly recommends using the safety lever lock (included) to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. Safety Lever Lock HW9Z-LS Anti-Rotation Ring Appearance HW9Z-RL Use with notched panel cutout to prevent unit rotation. nengraving Codes Engraving Code No Engraving Blank I/N Top /FF Bottom Spring-Up Exposed Screw HW-G HW-GR HW-C HW-CR HW-G HW-GR HW-C HW-CR Lamps/Lens Voltage 6V AC/DC LSTD-6k V AC/DC LSTD-k 4V AC/DC LSTD-k V AC LSTD-Hk 4V AC LSTD-M4k LED Incandescent Nonilluminated Illuminated 6V AC/DC V AC/DC 4V AC/DC IS-6 IS- IS-4 HW9Z-B7B HW9Z-L7W. In place of k, specify the LED Color Code.. The LED contains a current-limiting resistor and reverse polarity protection diodes. kled Color Code Color Code Color Code Amber A* Blue S* Green G* White W Red R* nly for LED illumination. 66

44 ømm - HW Series Contact Arrangement Chart Contact Arrangement Contact Block Top Button Bottom Button Top Button Bottom Button Contact Code Mounting Position Type Normal Push Normal Push N N N NC NC N NC NC N N N N-NC N NC NC N NC N-NC NC NC N N N NC N-NC N N-NC NC N N N NC NC N NC NC N N 3 Dummy 4 N N N 3 Dummy 4 NC N NC 3 Dummy 4 NC NC N 3 Dummy 4 N NC N 3 Dummy 4 NC NC NC 3 Dummy 4 NC N N 3 N 4 Dummy N NC 3 N 4 Dummy N N 3 NC 4 Dummy N N 3 NC 4 Dummy. Transformers can have two or four contact blocks only.. Contact blocks and 3 are actuated by the top button. Contact blocks and 4 are actuated by the bottom button. Contact Block Mounting Position Example Mounting Position 3 Mounting Position Mounting Position 4 Mounting Position Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 67

45 ømm - HW Series Blocks Signaling Lights Contact Arrangement Chart (con t) Top Button Contact Arrangement Contact Block Top Button Bottom Button Bottom Button NC N NC NC N N N N-NC N NC N-NC N N-NC N-NC N-NC NC NC N NC N-NC NC NC Contact Code Mounting Position Type Normal Push Normal Push NC N 3 NC 4 Dummy NC NC 3 NC 4 Dummy N N 3 N 4 N N N 3 N 4 NC N NC 3 N 4 NC N N 3 NC 4 N N N 3 NC 4 NC N NC 3 NC 4 NC NC N 3 NC 4 N NC N 3 NC 4 NC NC NC 3 NC 4 NC Contact Block Mounting Position Example Mounting Position 3 Mounting Position Mounting Position 4 Mounting Position 68

46 ømm - HW Series Reset Buttons (Assembled) Plastic Bezel Metal Bezel (Blank) HWB-MRS-jT HW4B-MRS-jT Engraved R HWB-MRS-jT-ENG-R HW4B-MRS-jT-ENG-R Rod. In place of j specify Button Color Code.. 3mm (5. ) overall length. 3. 6mm flat base for easy alignment Contactor Reset Button j Button Color Code Color Code Color Code Black B White W Green G Yellow Y Red R Gray N Blue Contactor Reset Button (Sub-assembled) Rod + perator + Button = Completed Unit HW9Z-RS-TK4 perator Plastic Metal HWB-M HW4B-M S Button HWA-B-j In place of j, specify the Button Color Code from table. j Button Color Code Color Code Color Code Black B White W Green G Yellow Y Red R Gray N Blue S Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 69

47 ømm - HW Series Blocks Signaling Lights Nameplate (blank engraving plate included) Nameplate (engraved) Additional Insert (blank) Additional Insert (engraved) Nameplates - HW Series HWAM Black Plastic HWAQ Black Plastic HWAS Black Plastic HWAV Yellow Plastic 3. R4.9 ø 9 7 Engraving Plate R4.9 ø 9 7 Engraving Plate HWAM-B HWAQ-B HWAS-B HWAM-j HWAQ-j HWAS-j HWNP- HWNP- HWNP Dimensions 7 HWNP-j HWNP-j. In place of j, insert either the standard legend code from table below or custom engraving delimited by.. Standard engravings are available at no charge. 3. * HWAV-7 comes engraved Emergency Stop as shown in drawing. 4. HWAV5-7 and HWAV5- for 6mm diameter E-Stops (8mm diameter nameplate). Standard Legend Codes Pushbuttons Pushbuttons/Selector Switches Selector Switches Legend Code Legend Code Legend Code Legend Code Legend Code AUT CLSE DWN EMERG.STP FAST FRWARD HAND HIGH IN INCH JG LW LWER FF N PEN UT RAISE RESET REVERSE RUN SLW START STP TEST UP I (Int l n) (Int l ff) EM AUT-MAN CLSE-PEN DWN-UP FAST-SLW FR-REV HAND-AUT HIGH-LW JG-RUN LEFT-RIGHT LWER-RAISE MAN-AUT FF-N N-FF PEN-CLSE RAISE-LWER REV-FR RUN-JG RUN-SAFE SAFE-RUN SLW-FAST START-STP STP-START UP-DWN I (Int l FF N) ø.6 AUT-MAN-FF AUT-FF-MAN CLSE-FF-PEN DWN-FF-SLW FAST-FF-SLW FR-FF-REV LEFT-FF-RIGHT LWER-FF-RAISE FF-MAN-AUT FF-SLW-FAST FF-- PEN-FF-CLSE SLW-FF-FAST SUMMER-FF-WINTER UP-FF-DWN -FF- HAND-FF-AUT. To order engraved nameplates, add legend code to nameplate part number.. Character height based on the number of characters and size of nameplate. Standard character size is 3/6. 3. Nameplates with standard legends are the same list price as blank nameplates. 4. Nameplates have built-in anti-rotation feature for use with notched panel cut-outs. Additional anti-rotation ring (HW9Z-RL) is not necessary ø6mm HWAV- HWAV5- HWAV-7* HWAV5-7 mm 63

48 ømm - HW Series Nameplates rder Form HW Series Copy this order form and use it to specify Letter Height, Custom Engravings, Location of Engraving on Nameplate, and Quantity Desired. To ensure engraving accuracy, fax it to your IDEC representative or Distributor. Your Company: Name: Telephone: Fax & HWAM Nameplate Engraving Location HWAQ Nameplate Engraving Location HWAS Nameplate Engraving Location A Engraving Location B Step. Choose Letter Size - 7/64 or /8. Check the box for the letter size you want. Then write your lettering in box below the check boxes. Note: /8 size letters cannot exceed 9 characters. Step. Specify Quantity. Enter the number of nameplates desired in the box on the right. Step. Choose Letter Size - 7/64 or /8. Check the box for the letter size you want. Then write your lettering in box below the check boxes. Note: /8 size letters cannot exceed 9 characters. Step. Specify Quantity. Enter the number of nameplates desired in the box on the right. Qty Qty 7/64 Letter Size /8 Letter Size IDEC Rep/Distributor Contact: P number (if known): IDEC Rep/Distributor Phone: IDEC Rep/Distributor Fax & characters maximum (for 7/64 size letters) 9 characters maximum (for 7/8 size letters) /64 Letter Size /8 Letter Size Step. Choose Letter Size - 3/ or /8. Check the box for the letter size you want. Then write your lettering in box below the check boxes. Note: /8 size letters cannot exceed 9 characters. Step. Specify Quantity. Enter the number of nameplates desired in the box on the right. characters maximum (for 7/64 size letters) 9 characters maximum (for 7/8 size letters) Qty Step 3. Specify Location. Enter the location of engraving Location (A or B or Both), in box on the right. 3/3 Letter Size /8 Letter Size characters maximum (for 3/3 size letters) 4 characters maximum (for 7/8 size letters) Sample Letter Sizes 7/64 Letters: A B C D /8 Letters: A B C D Sample Letter Sizes 7/64 Letters: A B C D /8 Letters: A B C D A B Sample Letter Sizes 3/3 Letters: A B C D /8 Letters: A B C D Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 63

49 ømm - HW Series Switch Engraving rder Form HW Series Copy this order form and use it to specify Letter Height, Maximum Number of Lines and Text to be engraved. To ensure engraving accuracy, fax it to your IDEC representative or Distributor. Your Company: Telephone: Signaling Lights Name: Address: P: Fax: to be Engraved: Please check one of the boxes below to indicate your choice of engraving options: # of Lines Letter Height Square Switch Max. Characters Per Line # of Lines Letter Height Round Switch Max. Characters Per Line ø9mm, ø4mm Mushroom Head # of Lines Engraving Engraving Area Area Letter Height Max. Characters Per Line 5/3 5 5/3 5 5/3 5 Engraving Area /8 6 /8 5 /8 5 5/3 5 5/3 5 5/3 7 Engraving Area /8 6 /8 6 /8 7 3 /8 6 3 / / /3 5 Blocks Enter text to be engraved: Line : Line : Line 3: Line 4:. Above mentioned specifications hold true for standard size pushbuttons (round and square).. Engraving Area can be engraved for 4mm mushroom Head non-illuminated push button only. 3. Engraving is done on the button itself for non-illuminated push buttons and on marking plate for illuminated push buttons and pilot lights. 4. Please enter text exactly how you want it engraved, take care to emphasize capital or small letters. Sample Letter Sizes /8 Letters: 5/3 Letters: For IDEC Internal Use nly: Work rder #: 63

50 ømm - HW Series Accessories Item Appearance Description/Usage Locking Ring Wrench Lamp/LED Removal Tool Anti-Rotation Ring Rubber Mounting Hole Plug Metallic Mounting Hole Plug Barrier Pushbutton Clear Boot Padlock Cover Metallic tool used to tighten the plastic locking ring when installing the HW series in a panel Rubber tool makes lamp/led removal easier. Prevents rotation of switches in panel. (included with all assembled switches except pilot lights) Black rubber plug fills unused 7/8 mounting holes in panel. For plugging unused 7/8 mounting holes in the panel. Tighten the attached locking ring to a torque of kfg-cm maximum Degree of protection: IP66 To prevent contact between adjacent lead wires when buttons or switches are tightly mounted close together. Used to cover and protect pushbuttons perating temperature: 5 to +6 C Plastic hinged padlockable cover to protect pushbuttons or selector switches. (Not intended for E-Stops) Degree of protection: IP65 MW9Z-T R-55 for notched panel cutout (standard) for round panel cutout B-3 LW9Z-BM HW-VL Flush Pushbuttons Extended Pushbuttons HW9Z-KL Tab Adapter Tab #5 (6.35 x.8mm): Single tab TW-FA Mounting Adaptor Replacement Safety Lever Lock Reset Rod for verload Replacement perator Washer Replacement Locking Ring Switch Cover (Square) Used to mount round HW series (except Jumbo Mushroom, unibody, and square units) into a larger panel cut-out. (includes both pieces) Used to prevent contact mounting lever from moving due to heavy vibration or panel maintenance. to 3mm HW9Z-A3 to 5mm HW9Z-A5 HW9Z-LS 5 rod used with HWB-M. HW9Z-RS-TK4 Provided with operator. Insert between bezel and locking ring. Plastic locking nut comes with all HW operators & assemblies. Used only with round or square flush pushbuttons. HWM-WASHER Standard (plastic) ptional (metal) Replacement Keys Pair of Keys (#3) HW9Z-SKP HW9Z-RL LW9Z-L C-3 C-3 HW9Z-K (spring return) HW9Z-K (maintained cover) HW9Z-LN HW9Z-LNM Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 633

51 ømm - HW Series Signaling Lights Item Appearance Description/Usage Replacement Lens HW Illuminated Unibody Replacement Lens HWLV-LENSR Replacement Jumbo Dome Lens Replacement Jumbo LED Diffusing Lens Replacement LED Lamps for HW Jumbo Dome Polycarbonate Replacement Lens (If using yellow lens, use white LED.) Replacement LED Lamp - applicable for jumbo pilot lights only HWA-P5j j = (A, G, R, S, W, Y)) HW9Z-PP5C LSTDB-j j = (A, G, R, S, W) Rubber Cover for Dual Pushbuttons Barrier for Dual Pushbuttons Clear Silicon rubber cover Plastic barrier. Used when mounting the HW7 units on 3mm horizontal centers, to prevent possible interconnections between adjoining terminals. HW9Z-D7D HW-VG EM Sticker EM Emergency stop nameplate sticker HW9Z-EM-NP-TK E-Stop Shrouds s E-Stop Types Applicable Standards s E-Stop Types Applicable Standards HW9Z-KG 4mm Mushroom Head SEMI S-73,.5. Compliant HW9Z-KG3 4mm Mushroom Head SEMI S Compliant (Approved by TUV) HW9Z-KG 4mm, and 6mm Mushroom Head SEMI S-73,.5. & SEMATECH Compliant HW9Z-KG4 4mm Mushroom Head SEMI S Compliant (Approved by TUV) & SEMATECH Blocks Standard Contact Assemblies For use with Non-Illuminated Pushbuttons & E-Stops Contacts Standard Fingersafe Contacts Spring Up Contacts N NC N/NC N NC N/NC N NC N/NC N NC N/NC HW-CBF HW-CBF HW-CBF HW-CBF HW-CBF HW-CBF HW-CB HW-CB HW-CB HW-CB HW-CB HW-CB Gold contact option is available for spring-up terminals. Add suffix MAU to end of part number. For example, HW-CB becomes HW-CB-MAU. Contact Assemblies Full Voltage Contact Assemblies For use with Illuminated Pushbuttons. Contacts rder lamp separately. N N N/NC NC NC HW-FLQ HW-FLQ HW-FLQ HW-FLQ HW-FLQ 634

52 ømm - HW Series Transfomer Contact Assemblies For use with Illuminated Pushbuttons. Contacts V AC with LED 4V AC with LED 48V AC with LED V AC with Incandescent 4V AC with Incandescent. In place of k, specify the LED Color Code. k = A, G, R, S, or W. 6V LED or incandescent lamp included. N N NC N/NC N N NC N/NC N N NC N/NC N N NC N/NC N N NC N/NC HW-FLH-k HW-FLH-k HW-FLH-k HW-FLH-k HW-FLM4-k HW-FLM4-k HW-FLM4-k HW-FLM4-k HW-FLT8-k HW-FLT8-k HW-FLT8-k HW-FLT8-k HW-FLH HW-FLH HW-FLH HW-FLH HW-FLM4 HW-FLM4 HW-FLM4 HW-FLM4 Dimensions (mm) Non-Illuminated Pushbuttons Flush (HWB-M, -A) Extended (HWB-M, -A) ø9mm Mushroom (HWB-M3 -A3) M3.5 Screw Locking Ring 5. ( or blocks) 7. (4 blocks) Panel Thickness.8 to 6 3 ø9 5 ø LCK 4.4 M3.5 Screw Locking Ring 5. ( or blocks) 7. (4 blocks) Panel Thickness.8 to ø3.6 ø LCK 4.4 M3.5 Screw Locking Ring 5. ( or blocks) 7. (4 blocks) Panel Thickness.8 to 6 ø4mm Mushroom (HWB-M4, -A4) ø6mm Mushroom (HWB-M5) Square Flush (HWB-M, -A) M3.5 Screw Locking Ring 5. ( or blocks) 7. (4 blocks) Panel Thickness.8 to ø LCK 4.4 M3.5 Screw Locking Ring 5. ( or blocks) 7. (4 blocks) Panel Thickness.8 to ø6 M3.5 Screw Locking Ring 5. ( or blocks) 7. (4 blocks) ø9 Panel Thickness.8 to 6 Square Extended (HWB-M, -A) Contact Block (Bottom View) Wiring Arrows indicate access directions for wiring M3.5 Screw Locking Ring 5. ( or blocks) 7. (4 blocks) Panel Thickness.8 to LCK contact block contact blocks 4 contact blocks LCK LCK Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 635

53 ømm - HW Series Signaling Lights perators Flush (Round & Square) Panel Thickness.8 to ø3.6 Extended with Full Shroud Round 9.4 LCK LCK Square LCK Extended ø3.5 5 ø4mm Mushroom ø LCK 4.4 LCK Extended Dimensions (mm) ø9.5 ø ø Emergency Stop Pushbuttons ø9mm Head Pushlock Turn Reset (HWB-V3) Dimensions (mm) Panel Thickness.8 to 6 Screw M3.5 Gasket Locking Ring LCK ø contact block contact blocks 4 contact blocks 5. ( or blocks) 7. (4 blocks) ø4mm Head Pushlock Turn Reset (HWB-V4) LCK ø4mm Head EM Pushlock Turn Reset (HWB-V4) Locking Ring LCK Lock Lever ø4 ø Blocks ø4mm Head Pushlock Key Reset (HWB-4) LCK 5. ( or blocks) (4 blocks) 3 ø6mm Head Pushlock Turn Reset (HWB-V5) ø4 4.4 ø

54 ømm - HW Series ø4mm Head Push-Pull (HWB-Y) ø4 5 Illuminated E-Stop Pushbuttons (HWE-LV4) M3.5 Screw Gasket Cover Panel Thickness.8 to 6 TP Marking M3.5 Screw Lamp Arrangement (Bottom View) HWE-BV4 Side. (NC).3 (N). (NC).4 (N) (N-NC) Emergency Stop Stations Box Cover Mouting Screws Locking Ring HWE-LV4 A HWB-V4R LCK.5 Box Cover 4 LAMP TP ø4. (NC).3 (N). (NC).4 (N) (N-NC) Box Base ø4mm Head Unibody Pushlock Turn Reset (HWB-BV4) Panel Thickness.8 to 6 M3.5 Screw Gasket Cover perator Pushlock Turn Reset 3 Locking Ring TP Marking Mounting Hole ø R.8 max ø4 The minimum mounting centers shown below are applicable to E-Stop switches with one layer of contact blocks (two contact blocks). When two layers of contact blocks are mounted, determine the minimum mounting centers for ease of wiring. Unit Vertical Spacing Horizontal Spacing HWB-V3 HWB-V4 HWB-4 5 mm 5 mm HWB-Y HWB-V5 6 mm 6 mm Dimension A (mm) Pushlock Key Reset 3 (Key inserted: 49.4) Push Pull 5.5 Mounting Hole Layout 4-M4 Tapped Holes for Rear Mounting (Depth: mm) -Front Mounting Holes 6 ø4 Knockout 5.5 Dimensions (mm) 4 -ø4.6 Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 637

55 ømm - HW Series Pilot Lights Full Voltage M3.5 Screw Panel Thickness.8 to 6 Gasket Locking Ring Flush Dome Round/Dome Square Flush ø9 Dimensions (mm) Signaling Lights Transformer M3.5 Screw Flush Dome Round/Dome ø9 Square Flush Mounting Hole Layout Close mounting on 3mm centers Degree of protection: IP DC-DC Converter M3.5 Screw 4 Flush Dome Round/Dome Square Flush ø9 When mounting transformer or DC-DC converter type units on 3mm centers vertically and horizontally, keep the ambient temperature below 4ºC. Jumbo Dome Pilot Lights Panel Thickness to 5 M3.5 Screw ø66 LED Lamp LSTDB Light blue: LSTDB Base BA9S/3 Illumination Color Incandescent Lamp LSB Base BA9S/3 ø Mounting Hole Layout R.8 max. ø ø Locking Ring Rubber Gasket Illuminated Pushbuttons Full Voltage Models Contact Block Contact Blocks 3 Contact Blocks Full Voltage Adapter Full Voltage Adapter Full Voltage Adapter Blocks M3.5 Screw Contact Block Locking Ring Panel Thickness.8 to 6 M3.5 Screw Contact Block Locking Ring Panel Thickness.8 to 6 M3.5 Screw Contact Block Locking Ring Panel Thickness.8 to 6 contact block 5. ( block) contact blocks 65.8 ( blocks) 3 contact blocks 7. (3 blocks) 638

56 ømm - HW Series Illuminated Pushbuttons con t 4 Contact Blocks Wiring Arrows indicate access directions for wiring. Full Voltage Adapter M3.5 Screw Contact Block 4 contact blocks Transformer Models 3 4 M3.5 Screws Locking Ring 85.8 (4 contacts) 89.7 ( blocks) 9.5 (4 blocks) Panel Thickness.8 to 6 Non-Illuminated Selector & Key Switches Knob perator M3.5 Screw contact block contact blocks 4 contact blocks Key perator Illuminated Selector Switches Full Voltage Model M3.5 Screw 69.4 ( blocks) 89.4 (4 blocks) Panel Thickness.8 to 6 Gasket Locking Ring 48.5 ( or blocks) 68.5 (3 or 4 blocks) 7 5 Contact Block Full Voltage Adaptor DC-DC Converter Models M3.5 Screw 3.5 LCK ø9 4.4 ø Transformer 9.4 Safety Lever Lock 89.5 ( blocks) 9.5 (4 blocks) 9.4 LCK LCK Transformer Model ø ø9 M.3.5 Screw Locking Ring 79.5 ( blocks) 99.5 (4 blocks) Wiring Dimensions (mm) Dimensions (mm) Arrows indicate access directions for wiring. Contact Block Full Voltage Adaptor Tranformer LCK 4.4 Signaling Lights Blocks ø9 8-6-IDEC (433) USA & Canada 639

57 ømm - HW Series Signaling Lights Dual Pushbutton Without Pilot Light 4.4 With Pilot Light Full Voltage (Bottom Button) (Top Button) 49.4 ( contacts) 69.4 (3 or 4 contacts) Panel Thickness.8 to 6 Safety Lever Lock HW Rubber Gasket.5 Locking Ring 4.5 Full Voltage Adapter HW 69.4 ( contacts), 89.4 (4 contacts) (Note) Without Button Markings With Button Markings (I/N and /FF) N FF The depth of a 3-contact model depends on the combination of contact blocks at top and bottom pushbuttons. Top Button contact block contact blocks Bottom Button contact blocks contact block Depth 89.4 mm 69.4 mm Mounting Hole Layout ø.3 55 ** +.4 R.8 max. * Dimensions (mm) -The 3. mm recess is for preventing rotation and is not necessary when a nameplate or anti-rotation ring is not used. -When using the safety lever lock, determine the vertical spacing in consideration of convenience for installing and removing the safety lever lock. -Recommended vertical spacing: mm -The minimum mounting centers are applicable to switches with one layer of contact blocks (two contact blocks). When two layers of contact blocks are mounted, determine the minimum mounting centers for ease of wiring. Transfomer (4V minimum) Transformer Transformer (48V) Transformer, DC-DC Converter HW Blocks HW 79.5 ( contacts), 99.5 (4 contacts) 89.5 ( contacts), 9.5 (4 contacts) Monolever Dimensions (mm) ( blocks) 69.4 (4 blocks) 8 7 4ϒ 36 max ϒ 36 max. 64

58 ømm - HW Series LW9Z-BM Metallic Mounting Hole Plug Gasket Locking Ring ø5.8 3 HW9Z-D7D Dual Pushbutton Rubber Cover HW9Z-KL Padlock Cover 7 3 ø5 (ID: ø44.4) HW9Z-KG ø TP Marking perator.5 ø. Key Hole ø8 8.5 R Panel Thickness:. to B-3 Rubber Mounting Hole Plug 3.5 ø9 ø5 HW-VG Dual Pushbutton Barrier 45 Panel Thickness.8 to Waterproof Rubber Gasket.5t Gasket TP Marking.5 Locking Ring 3.5 Accessory Dimensions HW9Z-RL Anti-Rotation Ring ø9 ø MW9Z-T Locking Ring Wrench HWLS-TK97 Safety Lever Lock Screwdriver.5 Safety Lever Lock Contact Block Mounting Adapter HW9Z-KG ø. TP Marking perator ø9 Panel Thickness:. to 4 ø76. TP ø8 Remove perator 36.5 Panel TP Marking Locking Ring R-55 Lamp/LED Removal Tool ø.6 HW-VL Barrier HW9Z-KG3 HW9Z-KG4 LSTD ø 4 ø ø74 ø 5 ø ø Lock Lever Install ø9.5 LCK ø4 Safety Lever Lock ø.6 Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 64

59 ømm - HW Series Blocks Signaling Lights Position Selector Switches HWS-T HWK-* HWF- HWS-3T HWK-3* HWF-3 Contact HW-F (N) HW-F (NC) HW-FR (N-EM) HW-FR (NC-LB) Mounting Position perator Position Left Right L R L R L R L R 3 Position Selector Switches Contact Mounting perator Position Position Left Center Right HW-F L (N) R HW-F L (NC) HWS-3ST HWK-3S* HW-FR (N-EM) HW-FR (NC-LB) Contact HW-F (N) HW-F (NC) HW-FR (N-EM) HW-FR (NC-LB) R L R L R Mounting perator Position Position Left Center Right L R L R L R L R. Mounting position indicates which side of operator each contact should be mounted (as viewed from the front of the panel).. *For key removable code see page 63. Specification Charts perator Truth Tables 3 Position Selector Switches con t HWS-3JT HWK-3J* Contact HW-F (N) HW-F (NC) HW-FCR (N-EM) HW-FR (NC-LB) Conforming to IED Appendix C. Utilization categories AC-5 and DC-3. peration rate:,8 op. hour Load factor: Inductive.4 ±.5 Resistive.9 ±.5 Mounting perator Position Position Left Center Right L R L R L R L R 4 Position Selector Switches Contact Mounting perator Position Position 3 4 HW-F L (N) R HW-F L (NC) R HWS-4T HW-FR L (N-EM) R HW-FR (NC-LB) L R 5 Position Selector Switches Contact Mounting perator Position Position HW-F L (N) R HW-F L (NC) R HWS-5T HW-FR L (N-EM) R HW-FR (NC-LB) 3. HWS-3T is identified by white plungers on the operator. 4. HWS-3ST is identified by red plungers on the operator. 5. HWS-3JT is identified by black plungers on the operator. L R 64

60 ømm - HW Series Turn off power to HW series control units before starting installation, removal, wiring, maintenance, and inspection of the products. Failure to turn power off may cause electrical shocks or fire hazard. To avoid the possibility of burning yourself, use the lamp holder tool when replacing lamps. Panel Mounting Remove the contact block assembly from the operator (for transformer type pilot lights, remove the transformer from the illumination unit). Remove the locking ring from the operator. Insert the operator into the panel cut-out from the front, tighten the locking ring from the back, then install the contact block assembly to the operator. Removing and Installing the Contact Block Assembly. To remove the operator from the contact block, turn the locking lever in the direction of the arrow shown below. The operator can now be removed.. To reinstall, place the TP markings on the operator and the contact block mounting adapter in the same direction, and insert the operator into the contact block mounting adapter. Then turn the locking lever in the opposite direction. Notes for Panel Mounting. When mounting the operator onto a panel, use the optional locking ring wrench (MW9Z-T) to tighten the locking ring. Tightening torque must not exceed. N m. Do not use pliers. Excessive tightening will damage the locking ring.. For the contact blocks and transformers housing LED and incandescent lamps, make sure not to press the lamps too hard, otherwise the lamp socket may be damaged. Replacement of Lens Removing Remove the lens by inserting a screwdriver into the recess of the lens through the bezel. Installing Install the lens in the recess between the buttons by pressing against the bezel. HW Safety Precautions HW General Instructions For wiring, use wires of a proper size to meet voltage and current requirements. Tighten the M3.5 terminal screws to a tightening torque of. to.3 N m. Failure to tighten terminal screws may cause overheating and fire. Safety Lever Lock IDEC strongly recommends using the safety lever lock (HW9Z-LS, yellow) to prevent heavy vibration or maintenance personnel from unlocking the contact assembly.. HW series can be mounted vertically with a minimum spacing of 55 mm but spacing should be determined to ensure easy operation (recommended minimum spacing: mm).. Mount the control unit onto the panel, lock the lever, and push in the safety lever lock to install. 3. When the spacing is narrower than the recommended value, with the lever unlocked, mount the safety lever lock and insert the contact unit to the operator. Then, lock the lever and strongly push in the safety lever lock to install. 4. To remove the safety lever lock, insert a flat screwdriver into the safety lever and push upwards. Screwdriver Safety Lever Lock Contact Block Mounting Adapter Dual Pushbutton Instructions Remove perator Panel Lock Lever 6.5 Install LCK Safety Lever Lock Signaling Lights Blocks 8-6-IDEC (433) USA & Canada 643

61 ømm - HW Series Replacement of Lamps Lamps can be replaced by using the lamp holder tool (R-55) from the front of the panel, or by removing the contact block assembly from the operator unit. Removing the Lamps from the Front of the Panel Dual Pushbuttons Instructions con t Tightening Torque for Screws Tighten the M3.5 terminal screws to a torque of. to.3 N m. Installation of LED Illuminated Units When using full voltage type LED illuminated units, provide protection against electrical noise, if necessary. Signaling Lights Removal. To remove, slip the lamp holder tool onto the lamp head lightly. Then push slightly, and turn the lamp holder tool counterclockwise. Installation. To install, insert the lamp head into the lamp holder tool, and hold the lamp as shown in the figure below. Lamp Lamp Holder Tool Applicable Wiring The applicable wire size is mm maximum. (solid wire ø.6mm maximum) ne or two wires can be connected. Applicable Crimping 7.9 max. ø3.6 min. 4 max. 5.5 min. Be sure to use an insulation tube or cover on the crimping part of the crimping terminal to prevent electrical shocks. Solid Wire. Place the pins on the lamp base to the grooves in the lamp socket. Insert the lamp and turn it clockwise. About Pushbutton Switches The pushbuttons cannot be removed or replaced! Lamp Base Do not attempt to remove the pushbuttons! ø.6 max. 8 max. Note: When connecting wires to contact blocks or transformers in the direction shown below, keep the insulation stripping length 6.6 mm at the maximum. Blocks Do not attempt to remove using a flat screwdriver or pincers, otherwise the pushbuttons may be damaged. Pushbuttons Narrow Mounting When mounting the units closely in a horizontal row on 3mm centers, use optional barriers to prevent interconnection between adjoining terminals. The barriers can be attached simply by pressing them onto the sides of contact blocks. 3 3 Barrier Inside Inside Installing the Rubber Cover When using the HW7D pushbuttons in places where the pushbuttons are subjected to water splash or an excessive amount of dust, make sure to use the HW9Z-D7D rubber boot (IP65) which is ordered separately. Notes for Installing the Rubber Cover Remove the gasket from the operator, and install the rubber boot on the operator. Pull out the seals of the rubber boot and place them around the operator sleeve as shown. Make sure that the seals are not twisted or tucked inside and that the gasket does not remain, otherwise the normal waterproof and dustproof characteristics are not ensured.. Remove the gasket.. Install the rubber boot 3. Rubber boot is on the pushbuttons. installed. When mounting transformer type illuminated units closely in a horizontal row on 3-mm centers, insert solid wires or stranded wires into inside of the terminal screw on the transformer (see figure on the right) to prevent short circuit between adjoining terminals. Inside Inside Gasket Remove Seals Seals Install 644