Oiltight Switches & Pilot Devices

Size: px
Start display at page:

Download "Oiltight Switches & Pilot Devices"

Transcription

1 Oiltight Non-Illuminated ushbuttons (Sub-Assembled) Contact Block + Operator + Button = Completed Unit art Numbers: Operators Style art Number Momentary Maintained LW1B-M0 LW1B-A0 LW2B-M0 LW2B-A0 Mushroom LW1B-M0L LW1B-A0L art Numbers: Buttons Type Mushroom Flush LW1A-B1-1 LW2A-B1-1 art Number Extended LW1A-B2-1 LW2A-B2-1 LW1A-B3-1 In place of 1, specify Button Color Code from table at right. 1 Button Color Code Color Code Black B Green G Red R Blue S White W Yellow Y art Numbers: Contact Blocks Appearance Contact Material Contact art Number Solder/Tab C Board Screw SDT LW-C1 LW-C1V Gold DDT LW-C2 LW-C2V LW-C2M 3DT LW-C3 LW-C3V SDT LW-C Silver DDT LW-C LW-CM 3DT LW-C7 USA: (800) 22-IDEC or (408) 7-00, Canada: (888) 317-IDEC -111 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main Office: (0) Outside Local Area: (800)

2 Oiltight Specifications Specifications Operating Temperature Storage Temperature Operating Humidity Contact Resistance Insulation Resistance Switch Unit Dielectric Strength Illumination Unit Vibration Resistance Shock Resistance Mechanical Life Electrical Life Degree of rotection Insulation Voltage Lenses Materials Operators Marking lates Terminal Style 2 to +0 C (without freezing) LED illuminated type: 2 to +0 C 40 to +80 C 4 to 8% RH 0mΩ maximum (initial value) 100MΩ minimum (00V DC megger) Between live part and ground: 2,00V AC, 1 minute Between terminals of different poles: 2,00V AC, 1 minute Between terminals of the same pole: 1,000V AC, 1 minute Between live part and ground: 2,00V AC, 1 minute Operating extremes: to Hz, Amplitude mm p-p Damage limits: 1,000 m/sec 2 (Approx. 100G) Operating extremes: 100 m/sec 2 (Approx. 10G) Momentary: 1,000,000 operations minimum Maintained: 00,000 operations minimum Selectors: 20,000 operations minimum Momentary: 100,000 operations minimum (at 1,800 operations/hour) Maintained/Selector: 100,000 operations minimum (at 00 operations/hour) Watertight/oiltight I (IEC ub2) (except key selectors) 20VAC/DC polyarylate polyacetate acrylic resin.110" Solder tab/quick connect C board terminal (gold contacts only) Screw terminal (DDT units only) Contact Ratings Contact Material Thermal Current Contact Rating Remarks Gold-clad cross-bar Silver Contact 3A A 30VDC/0.1A resistive 12VAC/0.1A resistive 30VDC/2A resistive 30VDC/1A inductive 12VAC/3A resistive(0/0hz) 12VAC/2A inductive (0/0Hz) 12VDC/0.4A resistive 12VDC/0.2A inductive 20VAC/2A resistive(0/0hz) 20VAC/1.A inductive (0/0Hz) Minimum applicable load (reference value): V, 1mA AC/DC. (Applicable range is subject to the operating condition and load.) AC inductive load: F=0. to 0.7, DC inductive load: L/R=7ms maximum. Lamp Ratings LED Voltage V AC/DC ±10% 12V AC/DC ±10% 24V AC/DC ±10% 120V AC ±10% 240V AC ±10% Current/Wattage 17mA max 11mA max 11mA max 10mA max 10mA max UL Recognized File # E CSA Certified File No. LR2141 Incandescent.3V AC/DC ±% 1W 12V AC/DC ±10% 1W 24V AC/DC ±10% 1W Registration No. J1801 LED lamps contains a built-in current-limiting resistor and reverse polarity protection diode. USA: (800) 22-IDEC or (408) 7-00, Canada: (888) 317-IDEC -10 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main Office: (0) Outside Local Area: (800)

3 Oiltight Dimensions: ushbuttons LW L & LW B: Illuminated & Non-Illuminated ushbuttons M3 M 4. C Width t X2 X1 X2 C NO 2 NO TO Width t anel Thickness: 0.8 to mm Extended ø30 2. Mushroom 2-R ø M3 Screw terminal M TO anel Thickness: 0.8 to mm 12. Extended 4. Mushroom ø X2 X1 X2 C NO NO C t Width t R ø USA: (800) 22-IDEC or (408) 7-00, Canada: (888) 317-IDEC Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main Office: (0) Outside Local Area: (800)

4 Oiltight Dimensions: ilot Lights LW1/LW2 ilot Lights M3 Screw terminal LW-VLM O 2 LW-VL..0.7 T O 3 Width t anel Thickness: 0.8 to mm 11.3 (solder) t. 2 TO anel Thickness: 0.8 to mm ø R0. USA: (800) 22-IDEC or (408) 7-00, Canada: (888) 317-IDEC -121 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main Office: (0) Outside Local Area: (800)

5 Oiltight LW1S and LW1K Selector and Keylock Switches M3 M Dimensions: Selector and Keylock Switches Width t.4 2 TO Anti-Rotation Ring Width t anel Thickness: 0.8 to mm ø anel Thickness 0.8 to mm 4.8 TO Anti-Rotation Ring Width t ø X2 X1 X2 C NO NO C R USA: (800) 22-IDEC or (408) 7-00, Canada: (888) 317-IDEC Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main Office: (0) Outside Local Area: (800)

6 Oiltight Dimensions: Selector and Keylock Switches, continued and Layouts LW1F LED and Incandescent Illuminated Selector Switches M3 M (solder) t 2. TO Anti-Rotation Ring Width t anel Thickness: 0.8 to mm ø2.8 X2 X1 X2 C NO NO C R0. Layouts LW L C Board Drilling Layout Bottom View 0.2" (mm) 0.18" (4.8mm) 0.2" (mm) 0.1" 0.24" (mm) (.mm) 0.1" (mm) LW B C Board Drilling Layout Bottom View 0.2" (mm) 0.18" (4.8mm) 0.2" (mm) 0.1" (mm) 0.1" (mm) ilot Lights C Board Drilling Layout Bottom View 0.0" (mm) 0.1" (mm) 0.443" (11.3mm) ø0.0" (ømm) holes Mounting Hole Layout ø0.87" +0.02" - 0 (ø " 0 mm) 14" (2mm) Note 2 0.0" (mm) ø0.0" (ømm) holes 0.0" (mm) 1. When determining mounting centerlines, allow for easy operation. 2. Mushroom (Ø 1.17" (Ø 30mm)) = 48" (32mm) Tab terminal = 14" (2mm) (with/without terminal cover) C board terminal = 14" (2mm) Screw terminal = 1." (40mm) 3. Mushroom (Ø 1.17" (Ø 30mm) = 48" (32mm) Tab terminal = 3" (27mm) (with terminal cover) Tab terminal = 14" (2mm) (without terminal cover) C board terminal = 14" (2mm) Screw terminal = 14" (2mm) 0.1" (mm) ø0.0" (ømm) holes 14" (2mm) Note 3 USA: (800) 22-IDEC or (408) 7-00, Canada: (888) 317-IDEC -123 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main Office: (0) Outside Local Area: (800)

7 Oiltight Instructions LW Series Replacement of Lens & Marking late Removing 1. Remove the operator (lens, marking plate, and lens holder) by inserting a screwdriver into the recess of the lens through the bezel. the same direction. Then push the lamp lightly and turn it clockwise. Grooves in the Operator Unit 2. Remove the marking plate by pushing the lens from the rear to disengage the latches between the lens and the lens holder, using the screwdriver as shown below. The translucent filter in the lens holder can not be removed because this filter is sealed to make the unit waterproof and oiltight. Installing For round lens types, place the marking plate on the lens holder with the antirotation projection engaged and press the lens onto the lens holder to engage the latches. For square lens types, insert the marking plate into the lens, and press the lens onto the lens holder to engage the latches. ay attention to the orientation of the marking plate. ay attention to the orientation of the marking plate. For Lens Lens Marking late Lens Holder Replacement of Lamps For Lens Lens Marking late Lens Holder Lamps can be replaced using the lamp holder tool (OR-) from the front of the panel. Also by removing the contact block from the operator unit, the lamp can be replaced. Replacement of Lamps from the Front of the anel. (How to Remove) 1. ush and turn the lamp counterclockwise using the side A of the lamp holder tool, and the lamp and the lamp holder can be removed. Replacement of Lamps by Removing the Contact Block The lamp can be replaced by removing the contact block without using the lamp holder tool. Marking lates & Films For LW series illuminated pushbuttons and pilot lights, legends and symbols can be engraved on marking plates, or printed mylar can be inserted under the lens for labelling purposes. Marking late and Marking Film Size Lens Style Lens Lens Built-in Marking late Applicable Marking Film Engraving must be made on the engraving area within 0.02" (0.mm) deep. The marking plate is made of white acrylic resin. Insertion Order of Marking late & Film For Lens Engraving Area ø0.4" (ø17.8mm) 0.033" (0.8mm) 0.772" (1.8mm) 0." (17.7mm) Mylar for printing labels are not included and must be provided and printed by user. Two 0.004" (0.1mm)-thick films or one 0.008" (0.2mm)-thick film can be installed in the lens. Recommended marking film: Mylar Lens Film Marking late Lens Holder 0.033" (0.8mm) Housing Insertion Order of Marking late & Film. For Lens 0.772" (1.8mm) Engraving Area ø0.83" (ø17.mm) Top Marking Side Top Marking Side (How to Install) 1. Insert the lamp into the lamp holder tool and hold the lamp as in the following illustration. Lamp Lamp Holder Tool Lens Film Marking late Lens Holder Housing 1. Mylar is not included. 2. ay attention to the orientation of marking plate. 2. lace the insertion guide of the lamp and the groove in the operator unit in USA: (800) 22-IDEC or (408) 7-00, Canada: (888) 317-IDEC Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main Office: (0) Outside Local Area: (800)

8 Oiltight Instructions con t anel Mounting Remove the contact block from the operator. Insert the operator into the panel cut-out from the front, then install the contact block to the operator. Removing the Contact Block Turn the locking lever on the contact block in the direction opposite to the arrow on the housing. Then the contact block can be removed. Installing the Contact Block Insert the contact block, with the TO markings on the contact block and the operator placed in the same direction. Then lock the units, turning the locking lever in the direction of the arrow. Notes on Mounting Use the optional Ring Wrench (LWZ-T1) to mount the operator onto a panel. Tightening torque should not exceed N-m (12 kgf-cm). Do not use pliers. Excessive tightening will damage the locking ring. Wiring 1. Solder the terminals within 20W/ seconds or 20 C/3 seconds without exerting external force to the terminals. While soldering, do not touch the soldering iron to the housing. While wiring, prevent tension from being applied to the terminals. Do not bend or raise the terminals, nor exert excessive force to terminals. 2. Use a non-corrosive resin liquid flux. Collective Mounting As the locking lever can be turned easily from the rear of the units using a screwdriver, the contact blocks can be removed even when mounted collectively. Connection ositive-lock connector and easy-lock connector are applicable to tab terminals. Single Board Mounting Mounting the switches and pilot lights on one C board offers the following features. 1. Reduced installation labor, easy wiring, space saving, and standardization. 2. Since the contact blocks on the C board can be removed easily using a locking lever, the LW series switches and pilot lights are easy to maintain. 3. Because the LW series switches and pilot lights require no studs for fastening the control unit to a C board, special preparation of operation panel is not needed. For details on one board mounting, contact IDEC. Light Touch And High Reliability Stroke 0.117" (3mm) Operating-force Snap Switching Mechanism Notes for () Insert the terminal cover into the contact block with the TO markings on the contact block and the terminal cover in the same direction. When wiring, insert the lead wires into the terminal cover holes before wiring. Notes for Wiring When installing a terminal cover onto the solder/tab terminal contact block, solder the inside of lamp terminal (toward the switch terminals) and wire. ( Type) Install a terminal cover to the control unit before wiring. 1. After wiring, terminal covers cannot be installed. 2. When terminal covers are used, round crimping terminals cannot be used Load (g) LW series pushbutton (Momentary DDT) LW series pushbutton (Momentary SDT) 0.03" 0.078" 0.117" 0.1" 0.1" 0.234" (1mm) (2mm) (3mm) (4mm) (mm) (mm) Stroke TW series pushbutton (SST-NO/SST-) USA: (800) 22-IDEC or (408) 7-00, Canada: (888) 317-IDEC -12 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main Office: (0) Outside Local Area: (800)

LW Series offer flexibility in space-saving package

LW Series offer flexibility in space-saving package ourtesy of Steven Engineering, Inc. 230 yan Way, South San Francisco,, 94080-6370 Main Office: (650) 588-9200 Outside Local rea: (800) 258-9200 www.steveneng.com LW Series offer flexibility in space-saving

More information

Miniature Switches & Pilot Devices

Miniature Switches & Pilot Devices A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and

More information

ø10 A1 Series Miniature Control Units

ø10 A1 Series Miniature Control Units A1 ø10 A1 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals

More information

ø8 A8 Series Miniature Control Units

ø8 A8 Series Miniature Control Units A8 ø8 A8 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals

More information

Oiltight Switches & Pilot Devices

Oiltight Switches & Pilot Devices Oiltight Emergency Stop Stations Part Numbers: Emergency Stop Stations Description Contacts Plastic Bezel Metal Bezel Ø 40mm Pushlock Turn Reset 1NO-1NC HW1X-BV411-R* HW4X-BV411-R* 2NC HW1X-BV402-R* HW4X-BV402-R*

More information

Bright illumination face and snap-action switching.

Bright illumination face and snap-action switching. ø A2 Series ø10 A1 Series ø8 A8 Series A2 Series A1 Series A8 Series Bright illumination face and snap-action switching. See website for details on approvals and standards. Hole Size Model Function Degree

More information

ø12 A2 Series Miniature Control Units

ø12 A2 Series Miniature Control Units ø2 A2 Series Miniature Control Short 22-mm-long body miniature control unit series with bright LED illumination face and snap-action switching. Degree of protection: IP40 and IP5 (IEC 0529) All series

More information

AP/UP Series Miniature Pilot Lights UZ Series Miniature Buzzer

AP/UP Series Miniature Pilot Lights UZ Series Miniature Buzzer AP/UP Series Miniature Pilot Lights UZ Series Miniature Buzzer Pilot Lights / Buzzer Selection Guide Series AP Series Miniature Pilot Lights AP6S Series Miniature Pilot Lights Mounting Hole Size ø6 ø2

More information

RY2L Series Miniature Magnetic Latching Relays. E Release Time. 60N (0 6G); Maximum frequency 55Hz

RY2L Series Miniature Magnetic Latching Relays. E Release Time. 60N (0 6G); Maximum frequency 55Hz Miniature Magnetic Latching Key features of the RY2L series include: Standard ice cube, 14-pin solder lug termination Operates by pulse input and maintains condition even during power failure Coils rated

More information

XA Series Emergency Stop Switches (w/removable Contact Block)

XA Series Emergency Stop Switches (w/removable Contact Block) XA ø6 XA Series Emergency Stop Switches (w/removable Contact Block) The World s First ø6 mm, 4-contact Emergency Stop Switch. Compact size - only 7.9 mm deep behind the panel. Reliable Safe break action.

More information

Oiltight Switches & Pilot Devices

Oiltight Switches & Pilot Devices Oiltight Switches & Pilot Devices HW Series 22mm IEC Style Global Pushbuttons Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Key features include: Locking

More information

MW Series Control Units

MW Series Control Units IP waterproof and dust-proof enclosure Suitable for installation in harsh environment, such as construction machines Prevents entry of sand and dust. eliable operation under high operation load Solder/tab

More information

NO NO NO. Standard Interlock Safety Switches HS6B. HS5E-K Key Locking Safety Interlock Switches

NO NO NO. Standard Interlock Safety Switches HS6B. HS5E-K Key Locking Safety Interlock Switches Standard Interlock Safety Switches HS6B HS5E-K Key Locking Safety Key features: Head removal detection circuitry. High-security pin tumbler key types are used. Sixteen types of key numbers are available,

More information

Switches & Pilot Devices

Switches & Pilot Devices ø16mm - A6 Series A6 Series Miniature Switches and Pilot Devices: 16mm Key features: 16mm (/8 ) mounting hole ED illumination ompact design saves space Momentary, Maintained, Selectors, and E-Stops Gold-clad

More information

Switches & Pilot Devices

Switches & Pilot Devices ø16mm - 6 Series Key features: 5/8 (16mm) mounting holes ocking lever removable contact blocks Solder terminal or PB terminal options Available assembled or as sub-components Worldwide approvals Incandescent

More information

Switches & Pilot Devices

Switches & Pilot Devices Key features: Two button sizes: ø29 and ø4mm ead-free, ohs compliant, (EU directive 22/95/EC) Depth behind the panel: Standard - only 27.9mm for 1 to 4 contacts Unibody - only 23.9mm for 1NC or 2NC IDEC

More information

ø22mm HW Series Control Units

ø22mm HW Series Control Units TREICHL-ATM Electronic Auf der Bült 10-12 D 41189 Mönchengladbach Tel. 02166 958545 Fax 02166 958547 email: atm@treichl.de internet: mm HW Series Control Units HW Series Control Units (Selection Guide)

More information

Emergency Stop Switches Selection Guide

Emergency Stop Switches Selection Guide Selection Guide New Concept Reverse Energy Structure Safe Break Action ø9mm Button E-BV3 (Solder, PC Board Terminal) Model Mark Page D-8 ø6m Mount Hole Non illuminated Detachable Block Pushlock Pull or

More information

SA1W: Water Detection Sensors

SA1W: Water Detection Sensors Courtesy of Steven Engineering, Inc. 230 Ryan Way, South San Francisco, CA, 94080-6370 ain Office: (650) 588-9200 Outside Local Area: (800) 258-9200 www.steveneng.com The SA1W is the fastest, most reliable

More information

Door Interlock Switches

Door Interlock Switches HSE Series HSE Series Miniature Solenoid Locking Switches Overview X Series E-Stops HSE features: World s smallest 4 contact solenoid interlock switch. (3 x x 46 mm) Four contacts Gold-plated contacts

More information

Switches & Pilot Devices

Switches & Pilot Devices ø16mm - 6 Series 6 Series Miniature Switches and Pilot Devices Key features of the 5/8 6 Series include: 5/8 (16mm) mounting holes ocking lever removable contact blocks Solder terminal or PB terminal options

More information

Miniature Switches & Pilot Devices

Miniature Switches & Pilot Devices ø16mm - 6 Series Miniature 6 Series Miniature Switches and Pilot Devices Key features of the 5/8 6 Series include: 5/8 (16mm) mounting holes ocking lever removable contact blocks Solder terminal or PB

More information

XW Series Emergency Stop Switches

XW Series Emergency Stop Switches ø ø mm, 4-contact Emergency Stop Switch. Compact size only 37. mm deep behind the panel (screw terminal type 4 mm with terminal cover). eliable Safe break action. The depth behind the panel is only 37.

More information

ø22mm HW Series Control Units Control Units

ø22mm HW Series Control Units Control Units mm HW Series Control Units Control Units HW Series Control Units (Selection Guide) Function Emergency Stop Switch (Unibody Type) Emergency Stop Switch (Separate Type) Pushlock Turn eset Category ø40mm

More information

Solenoid Locking Safety Switches

Solenoid Locking Safety Switches HSC HSC Full Size Solenoid Locking Switches Key features: Rugged aluminum die-cast housing 00N locking retention force Flexible Installation: The actuator can be accessed from two directions Select from

More information

EXCEL CELL ELECTRONIC CO., LTD. NO. A S P E C I F I C A T I O N Edition 2 Page 1

EXCEL CELL ELECTRONIC CO., LTD. NO. A S P E C I F I C A T I O N Edition 2 Page 1 S P E C I F I C A T I O N Edition 2 Page 1 ECS - INDUSTRIAL CONTROL SWITCH SELECTOR 1. FEATURES Up to 5 different operations. Detachable contact block for easy installation and removal. It can meet variety

More information

A22/M22. Specifications. Specifications Common to All. Complete Assemblies

A22/M22. Specifications. Specifications Common to All. Complete Assemblies Complete Assemblies Specifications Common to All A22/M22 The Following Pages Provide Information Common To Each Model of The A22/M22 Pushbutton Switch H A22 H A22S/W H A22K H M22 Specifications J APPROVED

More information

Safety Products. Safety Products. HS5E Series. HS5E Series Miniature Solenoid Locking Switch

Safety Products. Safety Products. HS5E Series. HS5E Series Miniature Solenoid Locking Switch HS5E Series HS5E Series Miniature Solenoid Locking Switch HS5E Key features include: World s smallest 4 contact solenoid interlock switch. (35 40 46 mm.) Four contacts. Gold-plated contacts. Spring lock

More information

Emergency Stop Switches

Emergency Stop Switches Emergency Stop Switches Emergency Stop Switches (Selection Guide) Series Emergency Stop Switch Name ø6mm X6 Series Pushlock Pull / Turn Reset (Unibody) ø6mm XA Series Pushlock Pull / Turn Reset (Unibody)

More information

INDUSTRIAL CONTROLS. Description. Products & features. Specifications. Illuminated or non-illuminated pushbutton switches.

INDUSTRIAL CONTROLS. Description. Products & features. Specifications. Illuminated or non-illuminated pushbutton switches. INDUSTRIAL CONTROLS E A01 SERIES Panel cut-out.630" (16mm) Description Products & features Specifications Illuminated or non-illuminated pushbutton switches Indicators Rotary lever switches eylock switches

More information

22mm XW E-Stops. IEC , EN , JIS C , UL508, UL991, NFPA79, CSA C22.2 No. 14, GB

22mm XW E-Stops. IEC , EN , JIS C , UL508, UL991, NFPA79, CSA C22.2 No. 14, GB ø22mm XW E-Stops Circuit Breakers Terminal Blocks ors Timers elays & Sockets Signaling ights 22mm XW E-Stops Key features: The depth behind the panel can be as little as 46.4 mm for 1 to 4 contacts (with

More information

AP Series / UP Series Miniature Pilot Lights UZ Series Miniature Buzzer

AP Series / UP Series Miniature Pilot Lights UZ Series Miniature Buzzer AP Series / UP Series Miniature Pilot Lights UZ Series Miniature Buzzer Pilot Light / Buzzer Selection Guide Series AP Series Miniature Pilot Lights AP6S Series Miniature Pilot Lights Mounting Hole Size

More information

Style Contact Type No. Button Color Code ø40mm Mushroom 1NC YW1B-V4E01R YW1B-V4E21R. Gasket ø40 YW1L-V4E11Q0R 2NC YW1L-V4E02Q➂R 6 (12V AC/DC)

Style Contact Type No. Button Color Code ø40mm Mushroom 1NC YW1B-V4E01R YW1B-V4E21R. Gasket ø40 YW1L-V4E11Q0R 2NC YW1L-V4E02Q➂R 6 (12V AC/DC) Pushlock Pull/Turn eset Style Contact Type No. Button Color Code ø40mm Mushroom NC YWB-V4E0 2NC 3NC NO-NC NO-2NC 2NO-NC YWB-V4E02 YWB-V4E03 YWB-V4E YWB-V4E2 YWB-V4E2 ed only Dimensions Panel Thickness

More information

Oiltight Switches & Pilot Devices

Oiltight Switches & Pilot Devices mm - Series Transfomer Contact Assemblies For use with Illuminated Pushbuttons. Style Contacts Part Number 12V AC with LED 24V AC with LED 48V AC with LED 12V AC with Incandescent 24V AC with Incandescent

More information

22mm XW E-Stops. UL File #E68961 CCC No Specifications

22mm XW E-Stops. UL File #E68961 CCC No Specifications XW Series 22mm XW E-Stops Key features: The depth behind the panel is only 48.7 mm for 1 to 4 contacts (with terminal cover) for illuminated and non-illuminated units. IDEC s original Safe break action

More information

HS1E Series Full Size Interlock Switch with Locking Solenoid

HS1E Series Full Size Interlock Switch with Locking Solenoid HS1E Series HS1E Series Full Size Interlock Switch with Locking Solenoid HS1E Key features include: Basic unit and solenoid unit in one housing Plastic Housing: Light weight Ease of Wiring: All the terminal

More information

HMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch

HMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch Edition 10/2016 HMI Components Series Characteristics The compact Series is especially suited for: Flush design The large rectangular design (24x36mm) features a large illuminated area. Functions The Series

More information

XW Series E-Stops. Safety. Selection Guide ø22mm XW E-Stops

XW Series E-Stops. Safety.  Selection Guide ø22mm XW E-Stops Safety Selection Guide... 288 ø22mm XW E-Stops... 289 www.idec.com/usa/estop XW Series E-Stops Overview Interlock Switches Enabling Switches Safety Control ight Curtains AS-Interface Safety at Work Table

More information

Lighted Pushbutton Switch

Lighted Pushbutton Switch Lighted Pushbutton Switch General Purpose and Micro-Voltage/Current Load Switch Requires only 22 mm mounting depth All LEDs, lamps, legends and pushbutton units replaceable without tools Oil-resistant

More information

Non-illuminated Push Buttons

Non-illuminated Push Buttons Non-illuminated Push Buttons 3 Accessories for push buttons Lockout attachment Contact block kits Lens kits Wobblestick kit Push Button Cap Interchangeable, snap-in design Protective caps 9 colors: red,

More information

22mm Push Buttons and Switches

22mm Push Buttons and Switches PUSH UTTONS/SWITCHES 22mm Push uttons and Switches Emergency Stops Selector Switches Lever Type Small Head 71.4 2 positions Large Head 3 positions unit: mm S2ER E3 R A D Size CONTACT LOCK * S2SR S 3 R

More information

RU Series Universal Relays

RU Series Universal Relays Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal

More information

Relays. Industrial Automation Catalog Section - U906. Selection Guides. General Purpose Relays RU Series RR Series

Relays. Industrial Automation Catalog Section - U906. Selection Guides. General Purpose Relays RU Series RR Series Industrial Automation Catalog Section - U906 Relays Selection Guides General Purpose Relays RU Series RR Series For up-to-date information, or to request a full copy of this catalog, contact us at www.idec.com

More information

Relays & Sockets. RR Series Power Relays. Part Number Selection. Key features: Sockets IDEC (4332) USA & Canada

Relays & Sockets. RR Series Power Relays. Part Number Selection. Key features: Sockets IDEC (4332) USA & Canada Key features: SPDT through PDT, 0 contacts Midget power type relays vailable in pin and blade terminal styles. Options include an indicator, check button for test operations and side flange. Series Power

More information

UP Series Miniature Pilot Lights

UP Series Miniature Pilot Lights Available in Various Sizes Five illumination colors: amber, green, red, white, yellow Various sizes and design. Available with a built-in current limiting resistor. Waterproof () types available for and.

More information

HW Series 22mm IEC Style Global Pushbuttons

HW Series 22mm IEC Style Global Pushbuttons ømm - HW Series Blocks Signaling Lights Key features: Locking lever removable contact blocks Finger-safe IP contacts as standard, other terminal styles available Tamperproof construction All E-stops meet

More information

A02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm)

A02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866 (22mm) or 1.161 x.846 (29.5mm x 21.5mm) PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm) E A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + one or two

More information

MC SERIES. Illuminated Control Units. Super LED or Incandescent Illumination Removable Contact Blocks

MC SERIES. Illuminated Control Units. Super LED or Incandescent Illumination Removable Contact Blocks MC SERIES Illuminated Control Units Super LED or Incandescent Illumination Removable Contact Blocks MC SERIES ILLUMINATED CONTROL UNITS Super Bright LED or Incandescent Illumination New Rectangular- and

More information

A01 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.630" (16mm)

A01 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.630 (16mm) PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + Switchblock To order, select desired model numbers from tables below. Example:

More information

Section. Safety Products Selection Guide...B-2

Section. Safety Products   Selection Guide...B-2 Section B New New New Selection Guide...B-2 : Door Interlock Switches HS6B Sub-Miniature...........-5 HS5B Miniature...............-8 HS2B Full Size, Molded Plastic.-14 HS1B Full Size, Cast Aluminum..................-18

More information

Relays & Sockets. RQ Series PCB Relays

Relays & Sockets. RQ Series PCB Relays RQ RQ Series PCB Relays IDEC RQ relays are low-profile, PCB relays in a compact package. Size equals value. RQ relays are small, yet maintain high contact ratings and long operational life. For larger

More information

ø22mm LW Series Control Units

ø22mm LW Series Control Units ø22mm W Series ontrol Units ø22 W Series ontrol Units (Selection Guide) Function ategory ound Flush Square Flush Pushbutton ound Flush with Square Bezel Momentary/ ound Extended Square Extended W1B- 1

More information

Switches & Pilot Devices

Switches & Pilot Devices ømm - HW Series Key features: Locking lever removable contact blocks Finger-safe IP contacts Tamperproof construction All E-stops meet EN6947-5-5, and are compliant with SEMI S standards Worldwide approvals

More information

2/3 Port Mechanical Valve. Specifications Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Port size Mass (Basic)

2/3 Port Mechanical Valve. Specifications Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Port size Mass (Basic) 2/3 Port Mechanical Valve Series 00 Large flow capacity. A variety of actuator types. Specifications Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Port size Mass (Basic)

More information

HS1C Series Full Size Interlock Switch with Locking Solenoid. GS-ET-15 BG standard in Germany. HS1C Series Functionality

HS1C Series Full Size Interlock Switch with Locking Solenoid. GS-ET-15 BG standard in Germany. HS1C Series Functionality Full Size Interlock Switch with Locking Solenoid HSC Key features include: Rugged Aluminum Die-cast Housing With the actuator mounted on a movable door, and the switch on a machine, the door can be mechanically

More information

Contacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Low energy contacts gold plated. Minimum PUSHBUTTON

Contacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Low energy contacts gold plated. Minimum PUSHBUTTON Pilot Devices Technical data UL General UL technical data Contact blocks Rated insulation voltage, UL 600V Rated thermal current 10A / 600VAC 2.5A / 600VDC Minimum rating 24VDC, 5mA Mechanical life (millions

More information

Solenoid Locking Safety Switches

Solenoid Locking Safety Switches Locking Safety Switches HSE HSE Full Size Locking Switches Key features: Plastic Housing: Lightweight 00N locking retention force Available with a red or green indicator Choose from circuit configurations

More information

GT5P Series ON Delay Timers

GT5P Series ON Delay Timers T5P Series T5P Series ON Delay Key features of the T5P series include:, 5A contacts 8-pin, octal base 9 time ranges Repeat error ±0.2% maximum Control settings by hand or screwdriver Power ON and timing

More information

Terminal Blocks. Selection Guide. Selection Guides. P-2 USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC

Terminal Blocks. Selection Guide. Selection Guides. P-2  USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC Selection Guide Key features of IDEC terminal blocks included: Molded from UL94-V0 material with excellent flame- and shock-resistance Mount on a standard 1.38" (35mm) DIN rail Marking strips and dust

More information

Door Interlock Switches

Door Interlock Switches HSE Series HSE Series Full Size Locking Switches Overview X Series E-Stops HSE features: Basic unit and solenoid unit in one housing Plastic Housing: Light weight Ease of Wiring: All the terminal screws

More information

HS2B N B - R. Door Interlock Switches. HS2B Series. Full Size Interlock Switch. Part Number. HS2B features: Part Number Key.

HS2B N B - R. Door Interlock Switches. HS2B Series. Full Size Interlock Switch. Part Number. HS2B features: Part Number Key. HSB Series HSB Series Full Size Interlock Switch HSB features: Body Direct Opening Action: If the door is forced open, the contacts are disconnected even if they are welded or stuck Available with or without

More information

Pushbuttons/Selectors/Pilot Lights AH25 General information

Pushbuttons/Selectors/Pilot Lights AH25 General information Pushbuttons/Selectors/Pilot Lights AH5 General information Features Oil and dust-proof construction Protection complies with IEC Standard IP65.Special seals keep out oil, water, dust, and chips. This gives

More information

The specified data apply only if actuators/signal indicators are combined with contact blocks and lamp sockets within the same product range.

The specified data apply only if actuators/signal indicators are combined with contact blocks and lamp sockets within the same product range. General data QR control component range For a mounting hole diameter of.3 mm to IEC 60947 50V/10A max. Water-jet proof IP65 collar shapes The lamps of the pushbuttons can also be replaced from the front

More information

Standard Interlock Safety Switches

Standard Interlock Safety Switches Subminiature Only 78 x 30 x 1m Two actuator entrances provide flexibility for installation options Integrated molded cable reduces wiring time IP67 (IEC60529) Direct Opening Action Actuators comply with

More information

XW Series E-Stops. Safety. ø22mm XW E-Stops Phone: Fax: Web: -

XW Series E-Stops. Safety. ø22mm XW E-Stops Phone: Fax: Web:  - Safety ø22mm XW E-Stops... 277 XW Series E-Stops Overview Interlock Switches Enabling Switches Safety Control ight Curtains AS-Interface Safety at Work Phone: 8.894.412 - Fax: 888.723.4773 - Web: www.clrwtr.com

More information

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS Distinctive features and specifications A01_AX1607US Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC PANEL CUT OUT ELECTRICAL

More information

Emergency Stop Switch A165E. Ordering Information. Mounting Aperture of 16 mm

Emergency Stop Switch A165E. Ordering Information. Mounting Aperture of 16 mm Emergency Stop Switch Mounting Aperture of 16 mm Modular construction, easy installation Positive opening mechanism with minimum contact separation of 3 mm in accordance with EN60947-5-1, Conforms to EN418

More information

HS6B Series Sub-Miniature Interlock Switch. Direct Opening

HS6B Series Sub-Miniature Interlock Switch. Direct Opening HS6 Series HS6 Series Sub-Miniature Interlock Switch HS6 Key features include: Only 30mm x 15mm x 78mm Allows highest level of safety by having 3 contacts: dual load contacts + monitoring contact (ISO13849-1,

More information

HS1B R - R. Door Interlock Switches. HS1B Series. HS1B Series Full Size Interlock Switch. Part Number. HS1B features: Part Number Key.

HS1B R - R. Door Interlock Switches. HS1B Series. HS1B Series Full Size Interlock Switch. Part Number. HS1B features: Part Number Key. HSB Series HSB Series Full Size Interlock Switch HSB features: Body Rugged aluminum die-cast housing Direct Opening Action: If the door is forced open, the contacts are disconnected even if they are welded

More information

Interlock Switches. Safety. Selection Guide HS6B Subminiature HS5D Miniature HS2B Full Size...

Interlock Switches. Safety.   Selection Guide HS6B Subminiature HS5D Miniature HS2B Full Size... Safety Selection Guide... 70 HS6B Subminiature... 7 HS5D Miniature... 76 HSB Full Size... 83 HSB Full Size... 87 HS6E Subminiature with Solenoid... 90 HS5E Miniature with Solenoid... 99 HSE Full Size Solenoid

More information

30mm Hazardous Location Switches:

30mm Hazardous Location Switches: 30mm Hazardous Location Switches: EU2B Series PRODUCT DESCRIPTION Complying with UL and ATEX Directives for hazardous environments, new 30mm EU2B Hazardous Location Switches provide increased safety for

More information

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS Distinctive features and specifications Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC A01_AX1607USR1 ELECTRICAL SPECIFICATIONS

More information

General_technical_data Series

General_technical_data Series Indicator actuator 2 500 Hz: 5 g Pushbutton actuator Lens flat/level with front bezel: - Momentary max. 3 600/h - Maintain max. 1 800/h Lens flat/raised above front ring: - Momentary max. 3 600/h - Maintain

More information

30mm Hazardous Location Switches:

30mm Hazardous Location Switches: 30mm Hazardous Location Switches: EU2B Series PRODUCT DESCRIPTION Complying with UL and ATEX Directives for hazardous environments, new 30mm EU2B Hazardous Location Switches provide increased safety for

More information

Lighted PushButton Switch

Lighted PushButton Switch Lighted PushButton Switch Cylindrical 8mm dia. Subminiature Series Featuring Short Mounting Depth Round, square and rectangular LED pushbutton units. types also available. Requires only 18mm mounting depth.

More information

A1-A01-A02-A03 series

A1-A01-A02-A03 series A1-A01-A02-A03 series Industrial controls Distinctive features The A01 and A02 series offer ranges of : - pushbutton switches, illuminated or not - indicators - 2 or 3 position keylock switches - 2 or

More information

Enabling Switches. Safety. Selection Guide

Enabling Switches. Safety.   Selection Guide Safety Selection Guide... 365 Panel Mount... 366 HE1B Series... 366 HE2B Series... 368 HE3B Series... 371 HE5B Series... 374 HE6B Series... 377 Grip... 380 HE1G Series... 380 HE1G-L Series... 384 HE2G

More information

Signaling Lights LD6A. LD6A LED SignaLight Towers Assembled Products. Unique Striped Design Improves Visibility

Signaling Lights LD6A. LD6A LED SignaLight Towers Assembled Products. Unique Striped Design Improves Visibility Unique Striped Design Improves Visibility Key features of the LD6A LED SignaLight Towers include: The striped design with non-illuminated area between the lenses makes the illuminated color very visible.

More information

A Series. Miniature Control Units

A Series. Miniature Control Units TEIH-ATM Electronic Auf der Bült 10-12 D 41189 Mönchengladbach Tel. 02166 958545 Fax 02166 958547 email: atm@treichl.de internet: A Series Miniature ontrol Units A Series Miniature ontrol Units Series

More information

ø22mm XW Series Emergency Stop Switches (Mechanical Indicator) Smooth Button Delivers Style and Cleanliness

ø22mm XW Series Emergency Stop Switches (Mechanical Indicator) Smooth Button Delivers Style and Cleanliness ø22mm XW Series Emergency Stop Switches (Mechanical Indicator) Normal/latched status can be checked from a distance with the mechanical indicator function. The smooth ridgeless button prevents dust build-up

More information

5 Port Mechanical Valve Metal Seal. Specifications Fluid. Basic Roller lever. Mechanical operation. One way roller lever.

5 Port Mechanical Valve Metal Seal. Specifications Fluid. Basic Roller lever. Mechanical operation. One way roller lever. 5 ort Mechanical Valve Metal Seal Compact design, large flow capacity 9.9 mm High cycle rate, long life/00 c.p.m. or less iping possible to any EXH port. roper countermeasures can be taken for applications

More information

HL (AZH) LIMIT SWITCHES

HL (AZH) LIMIT SWITCHES COMPACT SIZE LIMIT SWITCHES LIMIT SWITCHES U L PRODUCT TYPE 1. Limit Switches Actuator Type Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount

More information

Indicator body round for raised full face, black plastic, 22.5 mm mounting. Part No For complete switch also order

Indicator body round for raised full face, black plastic, 22.5 mm mounting. Part No For complete switch also order Series 14.5 mm 0.5 mm IP67 5 50 V INDITOR pushbutton keylock selector buzzer hoose one component from each of the coloured sections to assemble a complete switch. Product Profile Indicator The Series 14

More information

L1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel

L1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.

More information

[ Bezel size ] [ From panel front ] [ Shape ] [ Contact rating ] [ Action ] Unibody

[ Bezel size ] [ From panel front ] [ Shape ] [ Contact rating ] [ Action ] Unibody and Series Suitable for a wide variety of office and factory aplications. Features IE s original mechanism for snap-action switching. The E lamp contains a current-limiting resistor and a diode for protection

More information

Illuminated pushbutton, non-illuminated pushbutton, selector, key selector switches

Illuminated pushbutton, non-illuminated pushbutton, selector, key selector switches ND Series: 16 dia. types (AEL, ABL, ASL, AKL) Illuminated pushbutton, non-illuminated pushbutton, selector, key selector switches Bright, clear illumination (ultra-high intensity LED used) Separate mounting

More information

Functions The Series 19 incorporates the following functions: Indicator Pushbutton Illuminated pushbutton

Functions The Series 19 incorporates the following functions: Indicator Pushbutton Illuminated pushbutton Edition 11/2013 HMI-Components 19 Series Characteristics The compact 8 mm Series 19 is especially suited for: Raised design PCB (with adaptor) The low level switching element is laid out for low current

More information

Oiltight Cam Switches

Oiltight Cam Switches ø0mm - CS Series CS Series Heavy Duty Cam Switches Key features of the CS Series include: Wide variety of heavy-duty oiltight cam switches Operators available up to positions Switches made with a double

More information

A series Switches & Pilot Lights

A series Switches & Pilot Lights A series Switches & Pilot ights ø16 ø12 ø10 ø8 A Series Selection Guide Series A6 Series Switches and Pilot ights Mounting Hole Size ø16 Model A6 AB6 AS6 AS6 (key) Disc tumbler key Shape Wave key Unit

More information

NRA Series. Between main circuit terminals: 2,000V AC, 1 minute Between main circuit and auxiliary contact: 2,000V AC, 1 minute

NRA Series. Between main circuit terminals: 2,000V AC, 1 minute Between main circuit and auxiliary contact: 2,000V AC, 1 minute RA Series RA Series Key features of the RA series include: Available in 5 different styles Excellent overload and short circuit protection Small size and high-efficiency Life expectancy of over 0,000 operations

More information

A1-A01-A02-A03 series Industrial controls

A1-A01-A02-A03 series Industrial controls A-A0-A0-A0 series Industrial controls Distinctive features The A0 and A0 series offer ranges of : - pushbutton switches, illuminated or not - indicators - or position keylock switches - or position rotary

More information

Contacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Wire size

Contacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Wire size Technical data UL Pilot Devices General UL technical data Contact blocks Rated insulation voltage, UL 600V Rated thermal current 10A / 600VAC 2.5A / 600VDC Minimum rating 24VDC, 5mA Mechanical life (millions

More information

Features. Emergency Stop Switch A22E. Install in 22-dia. or 25-dia. Panel Cutout. Safety Lock Mechanism to Prevent Misuse.

Features. Emergency Stop Switch A22E. Install in 22-dia. or 25-dia. Panel Cutout. Safety Lock Mechanism to Prevent Misuse. Switch A22E Install in 22-dia. or 25-dia. Panel Cutout Direct opening mechanism to open the circuit when the contact welds. Safety lock mechanism prevents operating errors. Easy mounting and removal of

More information

Standard Interlock Safety Switches

Standard Interlock Safety Switches Subminiature Interlock Switches Key features: Only 78 x 30 x 1m Two actuator entrances provide flexibility for installation options Integrated molded cable reduces wiring time IP67 (IEC60529) Direct Opening

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter

More information

General Purpose Relay

General Purpose Relay General Purpose Relay Exceptionally reliable general purpose relay Long life (minimum 100,000 electrical operations) assured by silver contacts Built-in operation indicator (mechanical, LED), diode surge

More information

LUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, Click quick-assembly feature 1-29 LUMOTAST 25 selector switch, ring nut fixing 1-29

LUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, Click quick-assembly feature 1-29 LUMOTAST 25 selector switch, ring nut fixing 1-29 General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp socket

More information

Door Handle Gate System

Door Handle Gate System Door Handle Actuator Key features: Easy and secure operation Rattling doors can be locked smoothly and securely. A door can be locked with an actuator by pushing and turning the handle. Padlock tab is

More information

RAFIX 22 QR. General data. Content

RAFIX 22 QR. General data. Content QR General data QR control component range For a mounting hole diameter of.3 mm to IEC 60947 50V/10A max. Water-jet proof IP65 collar shapes The lamps of the pushbuttons can also be replaced from the front

More information

Push Button Units and Indicator Lights

Push Button Units and Indicator Lights 3SB3, Inscriptions, 22 mm Insert labels Push Button Units and Indicator Lights Push buttons (clear) and illuminated push buttons with a flat button can be fitted with insert labels for identification purposes,

More information