TWN TWND Series. Heavy duty switches & pilot lights offer both variety and reliability. For more information, visit

Transcription

1 and D eries Heavy duty switches & pilot lights offer both variety and reliability. Pilot light is not approved by EN standards. DC-DC convertor unit is not approved by standards. ee website for details on approvals and standards. Model Features Page Plastic eries The all-time bestseller since first developed. uitable for versatile applications Diecast Zinc D eries Heavy-duty switches for tough industrial usage

2 Function Category /D election uide Pushbutton Flush Extended Extended with Half hroud Momentary/ Momentary/ Momentary/ Diecast Zinc Diecast Zinc hape Model N1 D1 N2 D2 N2 D2 ON1 OD1 ON2 OD2 ON2 OD2 Page Function Pushbutton Category Extended with Full hroud Mushroom Mushroom with Full hroud Momentary/ Momentary/ Momentary/ Diecast Zinc Diecast Zinc Diecast Zinc hape Model N2F FD2 N3 D3 N3 D3 ON2F OFD2 ON3 OD3 OD3 Page Function Pushbutton Category Jumbo Mushroom Jumbo Mushroom with hallow hroud Jumbo Mushroom with Deep hroud Momentary Momentary Momentary Diecast Zinc Diecast Zinc Diecast Zinc hape Model N4 D4 N4 D4 N4F FD4 Page Function Pushbutton Category Mushroom Pushlock Turn eset (*1) Mushroom Push Turn Lock Mushroom Pull Diecast Zinc Diecast Zinc Diecast Zinc hape D Model VN3 VD3 JN3 JD3 ZN3 ZD3 Page Function Pushbutton Category Mushroom Push-Pull Pin Lock Diecast Zinc Diecast Zinc hape Model D3 D8P Page *1) Cannot be used as emergency stop switch based on IO and IEC Download catalogs and CD from /downloads -302

3 /D election uide Function LED Illuminated Pushbutton Category Extended Extended with Half hroud Extended with Full hroud Momentary/ Momentary/ Momentary/ Diecast Zinc Diecast Zinc Diecast Zinc hape Model LN2 LD2 LN2 LFN2 LFD2 OLN2 OLD2 OLN2 OLFN2 OLFD2 Page Function LED Illuminated Pushbutton Category Mushroom Momentary/ Mushroom Pushlock Turn eset (*1) Mushroom Push Turn Lock hape Diecast Zinc Diecast Zinc Diecast Zinc Model LN3 LD3 OLN3 OLD3 VLN3 VLD3 JLN3 Page Function elector Category Knob Lever Key Diecast Zinc Diecast Zinc Diecast Zinc hape D Model N D NL DL NK DK Page Function elector witch elector Pushbutton Category Key LED Illuminated Knob ing Diecast Zinc Diecast Zinc hape Model NK-NO241 LN LD N2 D2 Page Function LED Illuminated Pilot Light Category Dome quare Extended (IP) ectangular (Marking) (IP) Diecast Zinc hape Model PN1 PD1 UPQN3 UPQN4 Page *1) Cannot be used as emergency stop switch based on IO and IEC

4 /D atings/pecifications Heavy duty switches & pilot lights offer both variety and reliability. Endures harsh environments. Equipped with HW-U contact blocks featuring finger-safe (IP20) structure and spring-up terminals. eries (plastic) D eries (Diecast Zinc) ratings Pushbuttons Illuminated Pushbuttons elector Illuminated elector elector Pushbuttons ated insulation voltage ated continuous current ratings by utilization category JI C IEC ratings by utilization category HW-U10 (NO contact), HW-U01 (NC contact) Operating Current atings and pecifications 600V 10 C-15 (600) DC-13 Operating Voltage 24V 48V 50V 110V 220V 4V C C-12 Control of resistive loads and solid state loads /60 Hz C-15 Control of electromagnetic loads (> 72 V) DC DC-12 Control of resistive loads and solid state loads DC-13 Control of electromagnets HW-U10 (EM contact/no contact), HW-U01 (L contact/nc contact) Operating Voltage 24V 48V 50V 110V 220V 4V C C-12 Control of resistive loads and solid state loads Operating 50/60 Hz C-15 Control of electromagnetic loads (> 72 V) Current DC-12 Control of resistive loads and solid state loads DC DC-13 Control of electromagnets The operating current represents the classification by making and breaking currents (IEC ). ilver contacts Minimum applicable load: 3V C/DC, 5 m (applicable range may vary with operating conditions and load types) For mono-lever switches and cam switches, see the brochures of each product. HW-U lock IP20 construction No terminal cover necessary nap-fit latch (To install/remove the contact block) Part No. HW-U10 HW-U01 HW-U10 HW-U01 D Terminal No. 4 Terminal No. 3 Terminal screw (M3.5) HW-U10 (NO contact) Housing Push rod Terminal No. 2 HW-U01 (NC contact) Two-way wiring Terminal No. 1 1NC EM (NO) (early make) L (NC) (late break) Terminal No Housing color lue eddish purple lue eddish purple Push od color reen ed lack White Weight pprox. 11g Up to 4 contacts in two decks can be mounted onto each operator. (ZN, ZD, D: Up to 2 contact blocks in one deck) Cannot be used on operators in dark gray or light gray color. old contact available (gold-plated silver) Download catalogs and CD from /downloads -304

5 D /D eries LED Illuminated Unit atings Unit Illuminated pushbutton Illuminated selector switch Pilot light LED lamp Color ated Voltage Operating Voltage Lamp ase Part No. 6V C/DC 6V C/DC LTD-6 12V C/DC 12V C/DC LTD-1 24V C/DC 24V C/DC LTD-2 100/110V C 100/110V C (red) (green) (yellow) (amber) (blue) PW (pure white) 115/120V C (*1) 115/120V C (*1) 120V C (*2) 120V C (*2) 200/220V C 200/220V C 230/2V C (*1) 50/60 Hz 230/2V C (*1) 2V C (*2) 2V C (*2) 380V C 380V C 0/4V C 0/4V C 480V C 480V C 110V DC 90 to 1V DC ±10% 9/13 ee LED lamps, see LED Lamp atings below. pecify a color code in place of. (red), (green), (amber), (blue), PW (pure white) Use a pure white (PW) LED for yellow () illumination. Color codes for units without LED lamps: (red), (green), (amber), (yellow), (blue) When using a commercially available lamp, choose a lamp with rated voltage 5 to 30V C/DC and 1W maximum, and with the same base and shape. Make sure of correct operation before installation. The operation of /D series cannot be guaranteed when a commercially available lamp is used. *1) Illuminated pushbutton, illuminated selector switch *2) Pilot light Power Unit Terminal Illuminated Unit Pilot Light Full voltage adapter Power Unit Full voltage adapter Transformer DC-DC converter Transformer DC-DC converter (unibody) ated Voltage 6V, 12V, 24V C/DC 100 to 2V C 380V C min. 110V DC 6V, 12V, 24V C/DC 100 to 480V C 110V DC Polarity None None None hape/terminal X2 Note the polarity for wiring when connecting to DC-DC converter unit. LED Lamp atings (LTD) X1 X1 X2 X1 (+) X2 ( ) X1 None None X2 (PN1) X2 Part No. LTD-6 LTD-1 LTD-2 Lamp ase 9/13 ated Voltage 6V C/DC 12V C/DC 24V C/DC Voltage ange 6V C/DC ±10% 12V C/DC ±10% 24V C/DC ±10% Current Draw Lamp ase Color Voltage Marking Life (reference value) Internal Color,,, PW,,,, PW,,,, PW DC 7m 5.5m 10m 10m C 8m 8m 11m 11m ame as illumination color (PW: gray) Die stamped on the base pprox. 50,000 hours (The luminance is reduced to 50% the initial intensity when used on complete DC at 25 C.) X 1 ymbols LED chip ectifier diode X2 Example: LTD-2PW X1 LTD-6 X1 (+) X2 ( ) X1 Weight pprox. 2g pecify a color code in place of. (red), (green), (amber), (blue), PW (pure white) Use a pure white (PW) LED for yellow () illumination. X 2 Zener diode esistor ase color -305

6 pecifications /D eries Operating Temperature Non-illuminated: 25 to +70 C (no freezing) Illuminated: 25 to +50 C (no freezing) torage Temperature to +80 C (no freezing) Operating Humidity 45 to 85% H (no condensation) esistance 50 mω maximum (initial value) Insulation esistance 100 MΩ minimum (500V DC megger) etween live and dead metal parts: 2,500V C, 1 minute Dielectric trength (Full voltage and pilot lights: 2,000V C, 1 minute) 2000V C, (pilot lights: 6V C/DC, 12V, 24V) Vibration esistance Damage limits 30 Hz, amplitude 1.5 mm Operation extremes 5 to 55 Hz, amplitude 0.5 mm hock esistance Damage limits 1000 m/s 2 Operation extremes 100 m/s 2 Momentary 5,000,000 Pushbutton 500,000 (over 3 contacts: 250,000) Push lock turn reset 500,000 Pull 500,000 Mechanical Life Momentary 2,500,000 Illuminated pushbutton (minimum operations) 500,000 (over 3 contacts: 250,000) elector switch 500,000 Key selector switch 500,000 Illuminated selector switch 500,000 elector pushbutton 250,000 Momentary 500,000 witching frequency 1800 operations/h, duty ratio % Pushbutton 500,000 (over 3 contacts: 250,000) witching frequency 900 operations/h, duty ratio % Push lock turn reset 500,000 witching frequency 900 operations/h, duty ratio % Momentary 500,000 witching frequency 1800 operations/h, duty ratio % Electrical Life Illuminated pushbutton 500,000 (over 3 contacts: 250,000) (minimum operations) (*1) witching frequency 900 operations/h, duty ratio % elector switch 500,000 witching frequency 1200 operations/h, duty ratio % Key selector switch 500,000 witching frequency 1200 operations/h, duty ratio % Illuminated selector switch 500,000 witching frequency 1200 operations/h, duty ratio % elector pushbutton 250,000 witching frequency 900 operations/h, duty ratio % Pushbutton N122: 82g N322: 87g Illuminated pushbutton LN22222DN: 106g LN21622DN: 163g series elector switch N222N: 83g N2K22N: 120g Illuminated selector switch LN22222DN: 106g LN21622DN: 163g Weight (approx.) Pilot light PN122DN: 46g PN116DN: 125g Pushbutton D122: 108g D322: 113g Illuminated pushbutton LD22222DN: 132g LD21622DN: 189g D series elector switch D222N: 110g D2K22N: 147g Illuminated selector switch LD22222DN: 133g LD21622DN: 190g Pilot light PD122DN: 75g PD116DN: 152g *1) Load condition 220V C 3 (C-15) Degree of Protection eries Unit Model IEC JI C 0920 Pushbutton N, ON, VN Illuminated pushbutton LN, OLN, VLN elector switch N, NL series Key selector switch NK IP65 Dust-proof/jet-proof Illuminated selector switch LN elector pushbutton N ound pilot light PN quare pilot light UPQN IP Pushbutton D, OD, VD Illuminated pushbutton LD, OLD, VLD elector switch D, DL D series Key selector switch DK Diecast zinc Illuminated selector switch LD IP65 Dustproof/jet-proof elector pushbutton D ound pilot light PD /pilot lights have been tested in a test room in accordance with the degree of protection standards, by installing on an enclosure to valuate the effect on the enclosure or inside the switch or pilot light. D For harsh environment such as torrid/frigid area /D series for harsh environment such as tropical/frigid area is also available (not approved by standards). IDEC for details. Download catalogs and CD from /downloads -306

7 0 /D eries Hole Layout/ Centers.5 ound: 42 (*1) quare: 55 tandard models max. 4.8 Notes for Ordering (*1) ll dimensions in mm. The minimum mounting centers are applicable to pilot lights with one layer of contact blocks (one to two contact blocks). When two layers of contact blocks (four contact blocks) are mounted, determine the minimum mounting centers in consideration of convenience for wiring. *1) Mushroom with shroud: 50 mm minimum *1) Jumbo mushroom: 67 mm minimum *1) Jumbo mushroom with shroud: 77 mm minimum When high temperature is expected, take necessary measures such as securing sufficient mounting centers or using a cooling fan. The 4.8 mm recess is for preventing rotation and is not necessary when the nameplate or anti-rotation ring is not used. Note: For mounting hole layout of mono-lever switches and cam switches, see IDEC's website. pecify Ordering No. when ordering. pecify a color code in place of Pilot lights, illuminated pushbuttons, and illuminated selector switches have an LED lamp installed. Pilot lights are equipped with a terminal cover. Color codes for units without LED lamps: (red), (green), (amber), (yellow), (blue) When using a commercially available lamp, choose a lamp with rated voltage 5 to 30V C/DC and 1W maximum, and with the same base and shape. Make sure of correct operation before installation. The operation of /D series cannot be guaranteed when a commercially available lamp is used. Terminal covers, nameplates, and accessories for mono-lever swictch and cam switch are ordered separately. For terminal cover, nameplate and other accessories of mono-lever switches and cam switches, see IDEC's website. Ordering Information D Pushbutton When specifying gold-plated silver contact and contact configuration: series (-310 to -312) N MU D series (-326 to -328) D 2 11 N - MU Optional contact configuration Optional contact configuration <Codes> Optional contact MU: old-plated silver configuration 10: 01: 1NC 11: 1NC 20: 02: 22: : 4NO 04: 4NC 13: 3NC 31: 3NO1NC 30: 3NO 03: 3NC 12: 21: 1NC Note: Pushbutton with one or three contact blocks contains a dummy block. Mushroom pull pushbuttons ZN, ZD and mushroom push-pull D have up to two contacts in one layer. -307

8 Ordering Information Illuminated Pushbutton When specifying gold-plated silver contact, contact configuration, and LED operating voltage: /D eries series (-313 to -315) <Codes> Optional contact LFN DN - MU MU: old-plated silver Optional contact configuration configuration 10: Operating voltage 01: 1NC 11: 1NC D series (-329 to -330) 20: 02: LFD DN - MU 31: 3NO1NC Optional contact 22: configuration 13: 3NC Operating voltage : 4NO 04: 4NC Operating voltage 99: Without LED lamp 66: 6V C/DC 11: 12V C/DC 22: 24V C/DC 16: 100/110V C 126: 115/120V C 26: 200/220V C 246: 230/2V C 386: 380V C 46: 0/4V C 486: 480V C Note: Odd number of contact blocks, such as, 1NC, 3NO, -1NC, -, and 3NC, are not available for models of 100V C or over. Illuminated pushbuttons of 24V C/DC and below with two or four contact blocks contain a dummy block. ee -309 for how to specify 110V DC model (DC-DC converter). Color codes for units without LED lamps: (red), (green), (amber), (yellow), (blue) When using a commercially available lamp, choose a lamp with rated voltage 5 to 30V C/DC and 1W maximum, and with the same base and shape. elector witch When specifying gold-plated silver contact and contact configuration: series (-316 to -319) N 2 11 N - MU Optional contact configuration Key removable position code (example) D series (-331 to -333) D 2 11 N - MU Optional contact configuration <Codes> Optional contact MU: old-plated silver Key removable position Key removable Part No. Example position code series D series emovable in all positions (blank) N2K20N N2K20N-NO241 D2K20N emoval in left only N2K20N N2K20N-NO241 D2K20N 2-position emovable in right only C N2K20NC N2K20NC-NO241 D2K20NC pring return from right emoval in left only (blank) N21K20N N21K20N-NO241 D21K20N pring return from left emovable in right only (blank) N22K20N N22K20N-NO241 D22K20N emovable in all positions (blank) N3K20N N3K20N-NO241 D3K20N emovable in left and center N3K20N N3K20N-NO241 D3K20N emovable in right and center C N3K20NC N3K20NC-NO241 D3K20NC emovable in center only D N3K20ND N3K20ND-NO241 D3K20ND emovable in right and left E N3K20NE N3K20NE-NO241 D3K20NE emoval in left only N3K20N N3K20N-NO241 D3K20N 3-position emovable in right only H N3K20NH N3K20NH-NO241 D3K20NH emovable in left and center (blank) N31K20N N31K20N-NO241 D31K20N pring return from right emovable in center only D N31K20ND N31K20ND-NO241 D31K20ND emoval in left only N31K20N N31K20N-NO241 D31K20N emovable in right and center (blank) N32K20N N32K20N-NO241 D32K20N pring return from left emovable in center only D N32K20ND N32K20ND-NO241 D32K20ND emovable in right only H N32K20NH N32K20NH-NO241 D32K20NH pring return two-way emovable in center only (blank) N33K20N N33K20N-NO241 D33K20N The key cannot be removed in spring return positions. D Download catalogs and CD from /downloads -308

9 /D eries Ordering Information Illuminated elector witch When specifying gold-plated silver contact, contact configuration, and LED operating voltage: series (-320) <Codes> Optional contact LN DN - MU MU: old-plated silver Optional contact Operating voltage configuration (see -321 to -322) 99: Without LED lamp Operating voltage 66: 6V C/DC D series (-334) 11: 12V C/DC 22: 24V C/DC LD DN - MU 16: 100/110V C Optional contact 136: 115/120V C 26: 200/220V C configuration 256: 230/2V C Operating voltage 386: 380V C 46: 0/4V C 486: 480V C Note: Odd number of contact blocks, such as, 1NC, 3NO, -1NC, -, and 3NC, is not available for models of 100V C or over. Illuminated selector switches of 24V C/DC and below with two or four contact blocks contain a dummy block. ee below for how to specify 110V DC model (DC-DC converter). Color codes for units without LED lamps: (red), (green), (amber), (yellow), (blue) When using a commercially available lamp, choose a lamp with rated voltage 5 to 30V C/DC and 1W maximum, and with the same base and shape. Pilot Light (LED) When specifying LED operating voltage: series (-324 to -325) <Codes> Operating voltage PN1 26 DN 99: Without LED lamp Operating voltage 66: 6V C/DC 11: 12V C/DC UPQN3 22 D 22: 24V C/DC Operating voltage 16: 100/110V C 126: 115/120V C D series (-336) 26: 200/220V C 246: 230/2V C PD1 26 DN 386: 380V C Operating voltage 46: 0/4V C 486: 480V C ee below for how to specify 110V DC model (DC-DC converter). Color codes for units without LED lamps: (red), (green), (amber), (yellow), W (white), (blue) When using a commercially available lamp, choose a lamp with rated voltage 5 to 30V C/DC and 1W maximum, and with the same base and shape. DC-DC Convertor Model (110V DC) When specifying DC-DC convertor type on illuminated pushbuttons, illuminated selector switches, and pilot lights: series D LN D DN LN D DN PN1 16 D DN Operating voltage Operating voltage <Codes> Operating voltage 16 D: 110V DC Operating voltage D series LD D DN Operating voltage LD D DN Operating voltage PD1 16 D DN Operating voltage ee 110V DC model (DC-DC converter) is not approved by standards (operating voltage: 90 to 1V DC). Odd number of contact blocks, such as, 1NC, 3NO, -1NC, -, and 3NC, is not available for 100V DC model (DC-DC converter). -309

10 Flush N1 ON1 Extended N2 ON2 Flush/Extended/Extended w/half hroud/extended with Full hroud Extended with Half hroud N2 ON2 Extended with Full hroud N2F ON2F hape Operation Part No. (Ordering No.) N110* 1NC N101* -1NC N111* Momentary N120* N102* W - N122* Note ON110* 1NC ON101* -1NC ON111* ON120* ON102* W - ON122* Note N210* 1NC N201* -1NC N211* Momentary N220* N202* W - N222* ON210* 1NC ON201* -1NC ON211* ON220* ON202* W - ON222* N210* 1NC N201* -1NC N211* Momentary N220* N202* W - N222* ON210* 1NC ON201* -1NC ON211* ON220* ON202* W - ON222* N2F10* 1NC N2F01* -1NC N2F11* Momentary N2F20* N2F02* W - N2F22* ON2F10* 1NC ON2F01* -1NC ON2F11* ON2F20* ON2F02* W - ON2F22* utton Color Code pecify a color code in place of * in Part No. (black), (green), (red), (yellow), (blue), W (white) ound bezel and shroud (metal): Chrome-plated Pushbuttons with 1 or 3 contact blocks have a dummy block. ee -307 for other contact configurations and gold-plated silver contacts. ee -312 for bottom view. Terminal screws: M3.5 Integrated terminal cover Dimensions 65.4(3 or 4 blocks) (3 or 4 blocks) eries Package Quantity: 1 (ll dimensions in mm.) 14.9 (1 or 2 blocks) (3 or 4 blocks) (3 or 4 blocks) 16.5 ø to 3.5 ø24 ø to 6 ø24 ø28.5 ø39 ø39 ø39 ø39 D Note N1, ON1 with button color of (black), (green), or () red upply of color buttons,, has been discontinued for N1/ON1 without color code. When ordering, make sure to specify the required button color code. Download catalogs and CD from /downloads -310

11 D eries Mushroom N3 ON3 Mushroom/Mushroom w/full hroud/jumbo Mushroom/Jumbo Mushroom w/hallow hroud/jumbo Mushroom w/deep hroud Mushroom with Full hroud N3 Jumbo Mushroom N4 Jumbo Mushroom with hallow hroud N4 Jumbo Mushroom with Deep hroud N4F hape Operation Momentary Momentary Momentary Momentary Momentary 1NC -1NC - 1NC -1NC - 1NC -1NC - 1NC -1NC - 1NC -1NC - 1NC -1NC - Part No. (Ordering No.) N310* N301* N311* N320* N302* N322* ON310* ON301* ON311* ON320* ON302* ON322* N310* N301* N311* N320* N302* N322* N410* N1* N411* N420* N2* N422* N410* N1* N411* N420* N2* N422* N4F10* N4F01* N4F11* N4F20* N4F02* N4F22* utton Color Code pecify a color code in place of * in Part No. (black), (green), (red), (yellow), (blue), W (white) ound bezel and shroud (metal): Chrome-plated Pushbuttons with 1 or 3 contact blocks have a dummy block. ee -307 for other contact configurations and gold-plated silver contacts. ee -312 for bottom view. Terminal screws: M3.5 Integrated terminal cover W W W Dimensions 65.4 (3 or 4 blocks) 43.9 (1 or 2 blocks) 63.9 (3 or 4 blocks) 65.4 (3 or 4 blocks) 65.4 (3 or 4 blocks) 65.4 (3 or 4 blocks) to 6.5 ø48 ø65 Package Quantity: 1 (ll dimensions in mm.) 29 ø65 ø75 29 ø

12 Mushroom Pushlock Turn eset/mushroom Push Turn Lock/Mushroom Pull hape Mushroom Pushlock Turn eset (*1) VN3 Mushroom Push Turn Lock JN3 Mushroom Pull ZN3 1NC -1NC - 1NC -1NC - 1NC -1NC Part No. (Ordering No.) VN310N* VN301N* VN311N* VN320N* VN302N* VN322N* JN310N* JN301N* JN311N* JN320N* JN302N* JN322N* ZN310N* ZN301N* ZN311N* ZN320N* ZN302N* utton Color Code Dimensions 65.4 (3 or 4 blocks) (3 or 4 blocks) 23.6 eries Package Quantity: 1 (ll dimensions in mm.) stroke pecify a color code in place of * in Part No. (black), (green), (red), (yellow) ound bezel (metal): Chrome-plated Pushbuttons with 1 or 3 contact blocks have a dummy block. ee -307 for other contact configurations and gold-plated silver contacts. Mushroom pull has up to 2 contact blocks. Terminal screws: M3.5 Integrated terminal cover *1) Pushlock turn reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use XN series emergency stop switches (IO and IEC compliant). Pushbutton operation Pushlock Turn eset utton is maintained when pressed and is reset when turned clockwise. Push Turn Lock utton is locked when turned clockwise in the depressed position and is reset when turned counterclockwise. Pull Pulling the button operates the contacts, and releasing the button return the contacts. Pull contact operation ZN3 Normal Pull - ottom View (for non-illuminated pushbuttons and selector switches) D Dummy lock Dummy lock ee -348 for wiring. Integrated terminal cover 1 contact block (NO) (NC: opposite position) 3 contact blocks 2/4 contact blocks Download catalogs and CD from /downloads -312

13 D eries Extended LN2 OLN2 LED Illuminated Extended/Extended with Half hroud/extended with Full hroud hape ase Operation Operating Voltage (24VC/DC) With transformer (100/110V C) Extended with Half hroud LN2 OLN2 (24V C/DC) With transformer (100/110V C) Extended with Full hroud LFN2 OLFN2 (24V C/DC) With transformer (100/110V C) Momentary Momentary Momentary 24V C/DC 100/110V C 200/220V C 24V C/DC 100/110V C 200/220V C 24V C/DC 100/110V C 200/220V C 24V C/DC 100/110V C 200/220V C 24V C/DC 100/110V C 200/220V C 24V C/DC 100/110V C 200/220V C -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC Part No. (Ordering No.) LN22211DN* LN22220DN* LN22202DN* LN21611DN* LN21620DN* LN21602DN* LN22611DN* LN22620DN* LN22602DN* OLN22211DN* OLN22220DN* OLN22202DN* OLN21611DN* OLN21620DN* OLN21602DN* OLN22611DN* OLN22620DN* OLN22602DN* LN22211DN* LN22220DN* LN22202DN* LN21611DN* LN21620DN* LN21602DN* LN22611DN* LN22620DN* LN22602DN* OLN22211DN* OLN22220DN* OLN22202DN* OLN21611DN* OLN21620DN* OLN21602DN* OLN22611DN* OLN22620DN* OLN22602DN* LFN22211DN* LFN22220DN* LFN22202DN* LFN21611DN* LFN21620DN* LFN21602DN* LFN22611DN* LFN22620DN* LFN22602DN* OLFN22211DN* OLFN22220DN* OLFN22202DN* OLFN21611DN* OLFN21620DN* OLFN21602DN* OLFN22611DN* OLFN22620DN* OLFN22602DN* Package Quantity: 1 Dimensions Color Code Page PW PW PW PW PW PW -315 pecify a color code in place of * in Part No. (red), (green), (yellow), (amber), (blue), PW (pure white) Illuminated pushbuttons have an LED lamp installed. ound bezel (metal): Chrome-plated ee -308 for other operating voltage such as 6V C/DC, 12V C/DC, and 110V DC. Illuminated pushbutttons of 24V C/DC or below with 2 or 4 contact blocks have a dummy block. ee -308 for other contact configurations and gold-plated silver contacts. ee -308 for how to specify units without LED lamps. When using a commercially available lamp, choose a lamp with rated voltage 5 to 30V C/DC and 1W maximum, and with the same base and shape. Make sure of correct operation before installation. The operation of illuminated pushbutton switches cannot be guaranteed when a commercially available lamp is used. ee -314 for bottom view. Terminal screws: M3.5 Integrated terminal cover -313

14 LED Illuminated Mushroom ()/Mushroom Pushlock Turn eset/mushroom Push Turn Lock hape ase Operation Operating Voltage Mushroom () -1NC LN3 24V C/DC OLN3-1NC Momentary 100/110V C -1NC 200/220V C (24V C/DC) 9-1NC 24V C/DC -1NC 100/110V C -1NC With tranformer 200/220V C (100/110V C) Mushroom Pushlock Turn eset -1NC VLN3 (*1) 24V C/DC -1NC 9 100/110V C -1NC 200/220V C (24V C/DC) Mushroom Push Turn Lock -1NC JLN3 24V C/DC -1NC 9 100/110V C -1NC 200/220V C (24V C/DC) pecify a color code in place of * in Part No. (red), (green), (yellow), (amber), (blue), PW (pure white) Illuminated pushbuttons have an LED lamp installed. ound bezel (metal): Chrome-plated ee -308 for other operating voltage such as 6V C/DC, 12V C/DC, and 110V DC. ee -308 for other contact configurations and gold-plated silver contacts. Illuminated pushbutttons of 24V C/DC or below with 2 or 4 contact blocks have a dummy block. ee -308 for how to specify units without LED lamps. Illuminated pushbutton operation Pushlock Turn eset utton is maintained when pressed and is reset when turned clockwise. ottom View (for illuminated pushbuttons, selector switches, and pilot lights) Part No. (Ordering No.) LN32211DN LN32220DN LN32202DN LN31611DN LN31620DN LN31602DN LN32611DN LN32620DN LN32602DN OLN32211DN OLN32220DN OLN32202DN OLN31611DN OLN31620DN OLN31602DN OLN32611DN OLN32620DN OLN32602DN VLN32211DN VLN32220DN VLN32202DN VLN31611DN VLN31620DN VLN31602DN VLN32611DN VLN32620DN VLN32602DN JLN32211DN JLN32220DN JLN32202DN JLN31611DN JLN31620DN JLN31602DN JLN32611DN JLN32620DN JLN32602DN eries Package Quantity: 1 Dimensions Color Code Page PW PW PW -315 When using a commercially available lamp, choose a lamp with rated voltage 5 to 30V C/DC and 1W maximum, and with the same base and shape. Make sure of correct operation before installation. The operation of illuminated pushbutton switches cannot be guaranteed when a commercially available lamp is used. *1) Pushlock turn reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use XN or HN series emergency stop switches (IO and IEC compliant). Terminal screws: M3.5 Integrated terminal cover Push Turn Lock utton is locked when turned clockwise in the depressed position and is reset when turned counterclockwise. 6V, 12V, 24V C/DC 100/110V, 200/220V C Dummy lock 2V C or below 110V DC, 380V C or over D X1 Full Voltage dapter X1 X2 X1 X2 X2 1 contact block 3 contact blocks 2/4 contact blocks ee -348 for wiring. DC-DC converter unit Terminal No. X1: positive Terminal No. X2: negative Download catalogs and CD from /downloads -314

15 eries Dimensions (Illuminated Pushbuttons) Extended, LED illuminated (momentary/maintained) LN2/OLN2 (terminal screws M3.5) Integrated terminal cover 6, 12, 24V C/DC Without LED Lamp 100/110V C, 200/220V C (2V C or below) 110V DC/380V C or over ll dimensions in mm (1 block) 65.4 (2 or 3 blocks) 85.4 (4 blocks) 23.6 ø24 ø (2 blocks), 95.5 (4 blocks) 23.6 ø24 ø (2 blocks), (4 blocks) Extended with Half hroud, LED illuminated (momentary/maintained) LN2/OLN2 (terminal screws M3.5) Integrated terminal cover 6, 12, 24V C/DC Without LED Lamp 100/110V C, 200/220V C (2V C or below) 110V DC/380V C or over 23.6 ø ø to to to 3.5 ø24 ø27 ø24 ø27 ø24 ø27.9 (1 block) 60.9 (2 or 3 blocks) 80.9 (4 blocks) 28.1 ø (2 blocks), 91 (4 blocks) 28.1 ø (2 blocks), 101 (4 blocks) ø39 Extended with Full hroud, LED illuminated (momentary/maintained) LFN2/OLFN2 (terminal screws M3.5) Integrated terminal cover 6, 12, 24V C/DC Without LED Lamp 100/110V C, 200/220V C (2V C or below) 110V DC/380V C or over 0.8 to to to 6 ø24 ø29.5 ø24 ø29.5 ø24 ø (1 block) 63.9 (2 or 3 blocks) 83.9 (4 blocks) 25.1 ø (2 blocks), 94 (4 blocks) 25.1 ø (2 blocks), 104 (4 blocks) ø39 Mushroom (), LED illuminated (momentary/maintained) LN3/OLN3 (terminal screws M3.5) Integrated terminal cover 6, 12, 24V C/DC Without LED Lamp 100/110V C, 200/220V C (2V C or below) 110V DC/380V C or over 45.4 (1 block) 65.4 (2 or 3 blocks) 85.4 (4 blocks) (2 blocks), 95.5 (4 blocks) (2 blocks), (4 blocks) D Mushroom Pushlock Turn eset, LED illuminated VLN3 (terminal screws M3.5) Integrated terminal cover 6, 12, 24V C/DC Without LED Lamp 100/110V C, 200/220V C 110V DC/380V C or over 45.4 (1 block) 65.4 (2 or 3 blocks) 85.4 (4 blocks) (2 blocks), 95.5 (4 blocks) (2 blocks), (4 blocks) Mushroom Push Turn Lock, LED illuminated JLN3 (terminal screws M3.5) Integrated terminal cover 6, 12, 24V C/DC Without LED Lamp 100/110V C, 200/220V C 110V DC/380V C or over 45.4 (1 block) 65.4 (2 or 3 blocks) 85.4 (4 blocks) (2 blocks), 95.5 (4 blocks) (2 blocks), (4 blocks)

16 hape N elector (Knob ) Knob N eries Package Quantity: position 3-position (10) -1NC (11) (20) - (22) (20) (02) - (22) 4NO () 4NC (04) 3 pring eturn Configuration from ight lock N210N N2110N pring eturn from Left lock N2210N Dummy lock N211N N2111N N220N N2120N N222N N2122N pring eturn Configuration pring eturn from Left from ight N2211N N2220N N2222N pring eturn Two-way lock N320N N3120N N3220N N3320N N302N N3102N N3202N N3302N N322N N3122N N3222N N3322N N3N N31N N32N N33N N304N N3104N N3204N N3304N N33N-243 Dummy lock Knob: lack ound bezel (metal): Chrome-plated elector switches with 1 or 3 contact blocks have a dummy block. Knob operator can be installed at 45-degree intervals in addition to the positions shown in the above table. ee -321 to -322 for other contact configurations. Turn the operator to each position accurately. elector switches with have a half contact operating current (load switching current value). ated insulation voltage and rated current remain the same. ee -308 for gold-plated silver contacts. ee -312 for bottom view. D lock Dimensions ll dimensions in mm. 0.8 to position (3-position) ø (3 or 4 blocks) 21.1 Terminal crews: M3.5 Terminal cover: integrated Download catalogs and CD from /downloads -316

17 eries hape N- elector (Lever ) Lever NL Package Quantity: 1 D 90 2-position 3-position (10) -1NC (11) (20) - (22) (20) (02) - (22) 4NO () 4NC (04) 3 pring eturn Configuration from ight lock N2L10N N21L10N pring eturn from Left lock N22L10N Dummy lock N2L11N N21L11N N2L20N N21L20N N2L22N N21L22N pring eturn Configuration pring eturn from Left from ight lock NO NO NO NO NO NO NO NO Dummy lock Lever: lack ound bezel (metal): Chrome-plated elector switches with 1 or 3 contact blocks have a dummy block. Knob operator can be installed at 45-degree intervals in addition to the positions shown in the above table. ee -321 to -322 for other contact configurations. Turn the operator to each position accurately. N22L11N N22L20N N22L22N pring eturn Two-way N3L20N N31L20N N32L20N N33L20N N3L02N N31L02N N32L02N N33L02N N3L22N N31L22N N32L22N N33L22N N3LN N31LN N32LN N33LN N3L04N N31L04N N32L04N N33L04N N3L3N-243 elector switches with have a half contact operating current (load switching current value). ated insulation voltage and rated current remain the same. ee -308 for gold contact. ee -312 for bottom view. lock Dimensions ll dimensions in mm. 0.8 to position (3-position) 65.4 (3 or 4 blocks) Terminal crews: M3.5 Terminal cover: integrated -317

18 hape N-K Key elector Key elector (Key No. 0) NK eries Package Quantity: position 3-position (10) -1NC (11) (20) - (22) (20) (02) - (22) 4NO () 4NC (04) 3 Configuration lock 1 2 pring eturn from ight lock pring eturn from Left 1 2 N2K10N N21K10N Dummy lock N2K11N N21K11N N2K20N N21K20N N2K22N N21K22N pring eturn Configuration pring eturn from Left from ight 1 2 N22K10N N22K11N N22K20N N22K22N pring eturn Two-way lock N3K20N N31K20N N32K20N N33K20N N3K02N N31K02N N32K02N N33K02N N3K22N N31K22N N32K22N N33K22N N3KN N31KN N32KN N33KN N3K04N N31K04N N32K04N N33K04N N3K3N-243 Dummy lock Cylinder: Chrome-plated ound bezel (metal): Chrome-plated Key selector switches with 1 or 3 contact blocks have a dummy block. ee -321 to -322 for other contact configurations. On spring-returned types, the key can be released only from the maintained position. On maintained types, the key can be released from every position. ee -308 for specifying key retained positions. Key selector switch is supplied with two standard keys. (1) Insert the key completely before turning the key, otherwise failure may result. (2) Turn the operator to each position accurately. Different key number is available upon request. IDEC. elector switches with have a half contact operating current (load switching current value). ated insulation voltage and rated current remain the same. ee -308 for gold-plated silver contacts. ee -312 for bottom view. lock Dimensions ll dimensions in mm. 0.8 to position (3-position) D 65.4 (3 or 4 blocks) Terminal crews: M3.5 Terminal cover: integrated Download catalogs and CD from /downloads -318

19 eries hape N-K Key elector Key elector (Key No. 0) NK Package Quantity: 1 D 90 2-position 3-position (10) -1NC (11) (20) - (22) (20) (02) - (22) 4NO () 4NC (04) 3 Configuration pring eturn from ight pring eturn from Left lock lock N2K10N- N21K10N- Dummy lock NO241 NO241 N2K11N- N21K11N- NO241 NO241 N2K20N- N21K20N- NO241 NO241 N2K22N- N21K22N- NO241 NO241 Configuration pring eturn from ight pring eturn from Left lock Cylinder: Chrome-plated ound bezel (metal): Chrome-plated Key selector switches with 1 or 3 contact blocks have a dummy block. ee -321 to -322 for other contact configurations. On spring-returned types, the key can be released only from the maintained position. On maintained types, the key can be released from every position. ee -308 for specifying key retained positions. 1 2 N22K10N- NO241 N22K11N- NO241 N22K20N- NO241 N22K22N- NO241 pring eturn Two-way Dummy lock N3KN- NO241 N3K04N- NO241 N3K3N- 243-NO N3K20N- NO241 N3K02N- NO241 N3K22N- NO241 N31K20N- NO241 N31K02N- NO241 N31K22N- NO241 N31KN- NO241 N31K04N- NO241 N32K20N- NO241 N32K02N- NO241 N32K22N- NO241 N32KN- NO241 N32K04N- NO241 N33K20N- NO241 N33K02N- NO241 N33K22N- NO241 N33KN- NO241 N33K04N- NO241 Key selector switch is supplied with two standard keys. (1) Insert the key completely before turning the key, otherwise failure may result. (2) Turn the operator to each position accurately. Different key number is available upon request. IDEC. elector switches with have a half contact operating current (load switching current value). ated insulation voltage and rated current remain the same. ee -308 for gold-plated silver contacts. ee -312 for bottom view. lock Dimensions ll dimensions in mm. 0.8 to position (3-position) (3 or 4 blocks) Terminal crews: M3.5 Terminal cover: integrated -319

20 LN Illuminated elector (LED) Illuminated elector (9 ase) LN eries Package Quantity: 1 hape 90 2-position 3-position (24V C/DC) Configuration pring eturn from ight pring eturn from Left ated lock Voltage lock V C/DC LN22211DN* LN212211DN* LN222211DN* -1NC 100/110V C LN21611DN* LN211611DN* LN221611DN* (11) 200/220V C LN22611DN* LN212611DN* LN222611DN* 24V C/DC LN22220DN* LN212220DN* LN222220DN* (20) 100/110V C LN21620DN* LN211620DN* LN221620DN* 200/220V C LN22620DN* LN212620DN* LN222620DN* 24V C/DC LN22222DN* LN212222DN* LN222222DN* - 100/110V C LN21622DN* LN211622DN* LN221622DN* (22) 200/220V C LN22622DN* LN212622DN* LN222622DN* Configuration pring eturn pring eturn pring eturn from Left from ight Two-Way lock ated Voltage (20) (02) - (22) 4NO () 4NC (04) V C/DC LN32220DN* LN312220DN* LN322220DN* LN332220DN* 100/110V C LN31620DN* LN311620DN* LN321620DN* LN331620DN* 200/220V C LN32620DN* LN312620DN* LN322620DN* LN332620DN* 24V C/DC LN32202DN* LN312202DN* LN322202DN* LN332202DN* 100/110V C LN31602DN* LN311602DN* LN321602DN* LN331602DN* 200/220V C LN32602DN* LN312602DN* LN322602DN* LN332602DN* 24V C/DC LN32222DN* LN312222DN* LN322222DN* LN332222DN* 100/110V C LN31622DN* LN311622DN* LN321622DN* LN331622DN* 200/220V C LN32622DN* LN312622DN* LN322622DN* LN332622DN* 24V C/DC LN322DN* LN3122DN* LN3222DN* LN3322DN* 100/110V C LN316DN* LN3116DN* LN3216DN* LN3316DN* 200/220V C LN326DN* LN3126DN* LN3226DN* LN3326DN* 24V C/DC LN32204DN* LN312204DN* LN322204DN* LN332204DN* 100/110V C LN31604DN* LN311604DN* LN321604DN* LN331604DN* 200/220V C LN32604DN* LN312604DN* LN322604DN* LN332604DN* pecify a color code in place of * in Part No. (red), (green), (yellow), (amber), (blue), PW (pure white) Illuminated selector switches have an LED lamp installed. ound bezel (metal): chrome-plated ee -309 for other operating voltage such as 6V C/DC, 12V C/DC, and 110V DC. Illuminated selector switches of 24V C/DC or below with 2 or 4 contact blocks have a dummy block. ee -321 to -322 other contact configurations. 6, 12, 24V C/DC Without LED Lamp Color Code PW Color Code ee -309 for how to specify units without LED lamps. When using a commercially available lamp, choose a lamp with rated voltage 5 to 30V C/DC and 1W maximum, and with the same base and shape. Make sure of correct operation before installation. The operation of illuminated pushbutton switches cannot be guaranteed when a commercially available lamp is used. Turn the operator to each position accurately. ee -309 for gold-plated silver contacts. ee -314 for bottom view. lock Dimensions ll dimensions in mm. 0.8 to position (3-position) PW D ø25 (24V C/DC) 45.4 (1 block) 65.4 (2 or 3 blocks) 85.4 (4 blocks) 100/110V C, 200/220V C (2V C or below) to position (3-position) 110V DC 380V C or over 0.8 to position (3-position) ø25 ø25 With transformer (100/110V C) (2 blocks), 95.5 (4 blocks) (2 blocks), (4 blocks) Terminal crews: M Terminal cover: integrated Download catalogs and CD from /downloads -320

21 D eries elector Configuration (90 2-position) Configuration Configuration Code Not required Not required Code Not required Not required Not required Not required Not required elector switches with lock Knob Lever 1 2 Key Operation and pring eturn from ight 1 2 Knob Lever Key pring eturn from Left 1 2 Knob Lever Key Dummy lock Dummy lock Dummy lock Dummy lock Dummy lock Dummy lock EM L EM L lock Knob Lever 1 2 Key Illuminated Operation and pring eturn from ight 1 2 Knob Lever Key Illuminated Knob Lever pring eturn from Left 1 2 Key Illuminated have a half contact operating current (load switching current value). ated insulation voltage and rated current remain the same. lock Part No. Development N 2 L 31 N code configuration shape lank: knob L: lever K: key / operation 2: 2-position, maintained 21: 2-position, spring return from right 22: 2-position, spring return from left -321

22 elector Configuration ( 3-position) Configuration Code lock Knob/ Lever Key Illuminated Knob/ Lever Operation and pring eturn from ight Key Illuminated Knob/ Lever pring eturn from Left Key Illuminated eries Knob/ Lever pring eturn Two-way Not 20 required Not 02 required Not required Not required Dummy lock elector switches with have a half contact operating current (load switching current value). ated insulation voltage and rated current remain the same. On selector switches with, the contact blocks may overlap each other while turning the ring or lever operator. Not NO NC required NC Key Illuminated D lock Part No. Development N 3 L 22 N code configuration shape lank: knob L: lever K: key / operation 3: 3-position, maintained 31: 3-position, spring return from right 32: 3-position, spring return from left 33: 3-position, spring return two-way Download catalogs and CD from /downloads -322

23 D eries N2 elector Pushbuttons hape ing (90 2-position) N2 Configuration 11 (-1NC) 20 () 22 (-) Code 03 K04 03 D01 08 C10 D10 E10 F10 10 K15 lock Left ing ight Pushbutton Normal Push Normal Push EM locked locked EM EM utton Color Code ing Part No. (Ordering No.) N211N-03* N211N-K04* N211N-03* N220N-D01* N222N-08* N222N-C10* N222N-D10* N222N-E10* N222N-F10* N222N-10* N222N-K15* pecify a color code in place of * in Part No. (black), (green), (red), (yellow) ezel (metal): Chrome-plated code : The pushbutton does not operate when the ring operator is turned to the right position. codes E and F: The right and left NC contact blocks on circuit code E or F may overlap each other while turning the ring operator. The NO and NC contact blocks on circuit code F may overlap each other while pressing the button. When using the selector pushbutton, do not turn the ring operator with the pushbutton depressed. Otherwise, damage or failure may be caused. elector switches with have a half contact operating current (load switching current value). ated insulation voltage and rated current remain the same. ee -312 for bottom view. lock Dimensions ing operator (90 2-position) 0.8 to 7.5 (ll dimensions in mm.) 90 2-position 65.4 (3 or 4 blocks) 25 Terminal crews: M3.5 Terminal cover: integrated -323

24 ound PN1 ound, quare Extended, ectangular (Marking) (24V C/DC) quare Extended UPQN3 (24V C/DC) ectangular (Marking) UPQN4 hape Illumination ase ated Voltage LED LED 9 9 Part No. (Ordering No.) Color Code eries LED Lamp Part No. 24V C/DC PN122DN*,,,,, PW LTD-2* 100/110V C PN116DN*,,,,, PW 200/220V C PN126DN*,,,,, PW LTD-6* 24V C/DC UPQN322D*,,,,, PW LTD-2* 100/110V C UPQN316D*,,,,, PW 200/220V C UPQN326D*,,,,, PW LTD-6* Package Quantity: 1 Dimensions Page LED 9 100/110V C UPQN416D*,,,,, PW LTD-6* (24V C/DC) 200/220V C UPQN426D*,,,,, PW pecify a color code in place of * in Part No. (red), (green), (yellow), (amber), (blue), PW (pure white) ound bezel (metal): chrome-plated quare bezel (metal): chrome-plated Pilot lights have an LED lamp installed. Use a pure white (PW) LED for yellow () illumination. On the rectangular marking pilot light, a clear lens and a color marking plate (white) are used for W (white) illumination. ee -346 for the marking plate size of rectangular pilot lights. ee -309 for other operating voltage such as 6V C/DC, 12V C/DC, and 110V DC. ee -309 for how to specify units without LED lamps. When using a commercially available lamp, choose a lamp with rated voltage 5 to 30V C/DC and 1W maximum, and with the same base and shape. Make sure of correct operation before installation. The operation of illuminated pushbutton switches cannot be guaranteed when a commercially available lamp is used. When using a commercially available lamp on rectangular (marking) type, remove the reflector. Terminal cover is installed on pilot lights for electric shock prevention. Type Terminal Cover Quantity 6V, 12V, 24V C/DC PN-PVL 1 100V/110V C, 200/220V C N-VL V DC N-VL3 1 Note: DC-DC converter types are not approved by UL and, and not CE compliant. ee -314 for bottom view. eflector 1. The lamp housing of the square LED illuminated pilot lights has a built-in reflector. 2. Make sure that the reflector does not fall off when removing the lens or making plate. 3. When replacing the LED lamp of UPQN4 (rectangular), use a lamp holder tool (O-55). 4. To remove the reflector, insert a flat screwdriver inside the groove of the reflector and lightly push out. roove 24V C/DC UPQN422D*,,,,, PW LTD-2* -325 Panel of quare 1. Tighten the square bezel to the operator and position the bezel correctly. 2. Lightly tighten the screw to secure the pilot light on the panel. 3. fter tightening, do not turn the square bezel, otherwise it may fall off. crew asket Tighten the screw lightly so that the panel does not bend. ecommended tightening torque: 0.15 Nm D eflector Download catalogs and CD from /downloads -324

25 eries ound PN1 6V, 12V, 24V C/DC (Terminal Cover: PN-PVL) Without LED Lamp 38 Dimensions (Pilot Light) M3 Terminal crew to 7.5 ø Terminal screws: M3 100 to 480V C, 110V DC (Terminal Cover: N-VL3) M3.5 Terminal crew 0.8 to 7.5 ø ll dimensions in mm 36 Terminal screws: M3.5 quare Extended UPQN3 6V, 12V, 24V C/DC (Terminal Cover: PN-PVL) Without LED Lamp M3 Terminal crew 0.8 to to 480V C, 110V DC (Terminal Cover: N-VL3) M3.5 Terminal crew 0.8 to Terminal screws: M Terminal screws: M3.5 ectangular (Marking) UPQN4 6V, 12V, 24V C/DC (Terminal Cover: PN-PVL) Without LED Lamp 100 to 480V C, 110V DC (Terminal Cover: N-VL3) M3 Terminal crew 0.8 to M3.5 Terminal crew 0.8 to D Terminal screws: M Terminal screws: M3.5 ee -349 for wiring. -325

26 Flush/Extended/Extended with Half hroud/extended with Full hroud hape Operation Part No. (Ordering No.) utton Color Code Flush D110N* D1 1NC D101N* OD1-1NC D111N* Momentary D120N* D102N* W - Note D122N* OD110N* 1NC OD101N* -1NC OD111N* OD120N* OD102N* W - Note OD122N* Extended D210N* D2 1NC D201N* OD2-1NC D211N* Momentary D220N* D202N* W - D222N* OD210N* 1NC OD201N* -1NC OD211N* OD220N* OD202N* W - OD222N* Extended with Half hroud D210N* D2 1NC D201N* OD2-1NC D211N* Momentary D220N* D202N* W - D222N* OD210N* 1NC OD201N* -1NC OD211N* OD220N* OD202N* W - OD222N* Extended with Full hroud FD210N* FD2 1NC FD201N* OFD2-1NC FD211N* Momentary FD220N* FD202N* W - FD222N* OFD210N* 1NC OFD201N* -1NC OFD211N* OFD220N* OFD202N* W - OFD222N* pecify a color code in place of * in Part No. (black), (green), (red), (yellow), (blue), W (white) ound bezel (metal): Chrome-plated Pushbuttons with 1 or 3 contact blocks have a dummy block. ee -307 for other contact configurations and gold-plated silver contacts. ee -312 for bottom view. Terminal screws: M3.5 Integrated terminal cover Dimensions 65.4 (3 or 4 blocks) 65.4(3 or 4 blocks).9 (1 or 2 blocks) 60.9 (3 or 4 blocks) 65.4 (3 or 4 blocks) 0.8 to to D eries ø to ø24 (ll dimensions in mm.) ø to 6 ø24 ø28.5 Package Quantity: 1 ø ø ø ø D Note D1, OD1 with button color of (black), (green), or () red upply of color buttons,, has been discontinued for D1/OD1 without color code. When ordering, make sure to specify the required button color code. Download catalogs and CD from /downloads -326

27 D D eries Mushroom D3 OD3 Mushroom/Mushroom with Full hroud/jumbo Mushroom/Jumbo Mushrooms with hallow/deep hroud/pin Lock Mushroom with Full hroud D3 OD3 Jumbo Mushroom D4 Jumbo Mushroom with hallow hroud D4 Jumbo Mushroom with Deep hroud FD4 hape Operation Pin Lock (On-off Lock Type) (*1) D8P Pin Lock (On-lock Type) (*1) D8PN Momentary Momentary Momentary Momentary Momentary Part No. (Ordering No.) utton Color Code 1NC -1NC D310N* D301N* D311N* D320N* D302N* - D322N* W OD310N* 1NC OD301N* -1NC OD311N* OD320N* OD302N* - OD322N* W D310N* 1NC D301N* -1NC D311N* D320N* D302N* - D322N* W OD310N* 1NC OD301N* -1NC OD311N* OD320N* OD302N* - OD322N* W D410N* 1NC D1N* -1NC D411N* D420N* D2N* - D422N* D410N* 1NC -1NC - 1NC -1NC - 1NC -1NC - 1NC -1NC - D1N* D411N* D420N* D2N* D422N* FD410N* FD1N* FD411N* FD420N* FD2N* FD422N* D8P10N* D8P01N* D8P11N* D8P20N* D8P02N* D8P22N* D8PN10N* D8PN01N* D8PN11N* D8PN20N* D8PN02N* D8PN22N* pecify a color code in place of * in Part No. (black), (green), (red), (yellow), (blue), W (white) ound bezel (metal): Chrome-plated Pin Lock (On-lock type): utton can be locked in depressed position by inserting the pin (the button cannot be locked in reset position). Pushbuttons with 1 or 3 contact blocks have a dummy block. Dimensions 65.4 (3 or 4 blocks) 43.9 (1 or 2 blocks) 63.9 (3 or 4 blocks) 65.4 (3 or 4 blocks) 65.4 (3 or 4 blocks) 65.4 (3 or 4 blocks) 65.4 (3 or 4 blocks) to ø48 ø65 ø65 ø75 ø75 ø28 Package Quantity: 1 (ll dimensions in mm.) ee -307 for other contact configurations and gold-plated silver contacts. ee -342 for maintenance parts. *1) The pin for D8P is ø4.6 mm and is not compatible with N8P (old series). ee -312 for bottom view. Terminal screws: M3.5 Integrated terminal cover (38.7) -327

28 Pushlock Turn eset/push Turn Lock/Pull/Push-Pull hape Mushroom Pushlock Turn eset (*1) VD3 1NC -1NC Part No. (Ordering No.) VD310N* VD301N* VD311N* VD320N* utton Color Code Dimensions D eries Package Quantity: 1 (ll dimensions in mm.) Mushroom Push Turn Lock JD3-1NC -1NC VD302N* VD322N* JD310N* JD301N* JD311N* JD320N* JD302N* - JD322N* Mushroom Pull ZD3 ZD310N* -1NC ZD311N* ZD320N* ZD302N* Mushroom Push-Pull (*2) D31-1NC D3111N* D3120N* D3102N* 65.4 (3 or 4 blocks) 65.4 (3 or 4 blocks) stroke stroke pecify a color code in place of * in Part No. (black), (green), (red), (yellow) ound bezel (metal): Chrome-plated Pushbuttons with 1 or 3 contact blocks have a dummy block. ee -307 for other contact configurations and gold-plated silver contacts. Mushroom pull has up to 2 contact blocks. *1) Pushlock turn reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use XN series emergency stop switches (IO and IEC compliant). *2) Push-Pull switches with red button cannot be used as emergency stop switches. When emergency stop switches are required, use XN series emergency stop switches (IO and IEC compliant). ee -312 for bottom view. Terminal screws: M3.5 Integrated terminal cover Pushbutton operation Pushlock Turn eset utton is maintained when pressed and is reset when turned clockwise. Push Turn Lock utton is locked when turned clockwise in the depressed position and is reset when turned counterclockwise. Pull Pulling the button operates the contacts, and releasing the button return the contacts. Push-Pull 2-position switches with button maintained in both depressed and reset positions. Pull contact operation Push-Pull contact operation - ZD3 Normal Pull D31 Push Pull D Download catalogs and CD from /downloads -328

29 D D eries Extended LD2 OLD2 LED Illuminated Extended/Extended with Full hroud hape ase Operation (24V C/DC) With transformer (100/110V C) Extended with Full hroud LFD2 OLFD2 (24V C/DC) With transformer (100/110V C) 9 9 Momentary Momentary pecify a color code in place of * in Part No. (red), (green), (yellow), (amber), (blue), PW (pure white) Illuminated pushbuttons have an LED lamp installed. ound bezel (metal): Chrome-plated ee -308 for other operating voltage such as 6V C/DC, 12V C/DC, and 110V DC. ee -308 for other contact configurations and gold-plated silver contacts. Illuminated pushbutttons of 24V C/DC or below with 2 or 4 contact blocks have a dummy block. Dimensions Operating Voltage 24V C/DC 100/110V C 200/220V C 24V C/DC 100/110V C 200/220V C 24V C/DC 100/110V C 200/220V C 24V C/DC 100/110V C 200/220V C -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC Part No. (Ordering No.) LD22211DN* LD22220DN* LD22202DN* LD21611DN* LD21620DN* LD21602DN* LD22611DN* LD22620DN* LD22602DN* OLD22211DN* OLD22220DN* OLD22202DN* OLD21611DN* OLD21620DN* OLD21602DN* OLD22611DN* OLD22620DN* OLD22602DN* LFD22211DN* LFD22220DN* LFD22202DN* LFD21611DN* LFD21620DN* LFD21602DN* LFD22611DN* LFD22620DN* LFD22602DN* OLFD22211DN* OLFD22220DN* OLFD22202DN* OLFD21611DN* OLFD21620DN* OLFD21602DN* OLFD22611DN* OLFD22620DN* OLFD22602DN* Extended, LED illuminated (momentary/maintained) LD2/OLD2 (terminal screws M3.5) Integrated terminal cover 6, 12, 24V C/DC Without LED Lamp 100/110V C, 200/220V C (2V C or below) 110V DC, 380V C or over Package Quantity: 1 utton Color Code PW PW PW PW ee -308 for how to specify units without LED lamps. When using a commercially available lamp, choose a lamp with rated voltage 5 to 30V C/DC and 1W maximum, and with the same base and shape. Make sure of correct operation before installation. The operation of illuminated pushbutton switches cannot be guaranteed when a commercially available lamp is used. ee -314 for bottom view. ll dimensions in mm ø24 ø24 ø (1block) 65.4 (2 or 3 blocks) 85.4 (4 blocks) (2 blocks), 95.5 (4 blocks) (2 blocks), (4 blocks) Extended with Full hroud, LED illuminated (momentary/maintained) LFD2/OLFD2 (terminal screws M3.5) Integrated terminal cover 6, 12, 24V C/DC Without LED Lamp 100/110V C, 200/220V C (2V C or below) 110V DC, 380V C or over 0.8 to to to 6 ø24 ø29.5 ø24 ø29.5 ø24 ø (1 block) 63.9 (2 or 3 blocks) 83.9 (4 blocks) (2 blocks), 94 (4 blocks) (2 blocks), 104 (4 blocks)

30 LED Illuminated Mushroom ()/Mushroom Pushlock Turn eset Mushroom () LD3 OLD3 hape ase Operation Operating Voltage (24V C/DC) With transformer (100/110V C) Mushroom Pushlock Turn eset (*1) VLD3 (24V C/DC) 9 Momentary 9 24V C/DC 100/110V C 200/220V C 24V C/DC 100/110V C 200/220V C 24V C/DC 100/110V C 200/220V C -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC -1NC Part No. (Ordering No.) LD32211DN* LD32220DN* LD32202DN* LD31611DN* LD31620DN* LD31602DN* LD32611DN* LD32620DN* LD32602DN* OLD32211DN* OLD32220DN* OLD32202DN* OLD31611DN* OLD31620DN* OLD31602DN* OLD32611DN* OLD32620DN* OLD32602DN* VLD32211DN* VLD32220DN* VLD32202DN* VLD31611DN* VLD31620DN* VLD31602DN* VLD32611DN* VLD32620DN* VLD32602DN* D eries Package Quantity: 1 Color Code pecify a color code in place of * in Part No. (red), (green), (yellow), (amber), (blue) Illuminated pushbuttons have an LED lamp installed. ound bezel (metal): Chrome-plated ee -308 for other operating voltage such as 6V C/DC, 12V C/DC, and 110V DC. ee -308 for other contact configurations and gold-plated silver contacts. Illuminated pushbutttons of 24V C/DC or below with 2 or 4 contact blocks have a dummy block. ee -308 for how to specify units without lamps. When using a commercially available lamp, choose a lamp with rated voltage 5 to 30V C/DC and 1W maximum, and with the same base and shape. Make sure of correct operation before installation. The operation of illuminated pushbutton switches cannot be guaranteed when a commercially available lamp is used. *1) Pushlock turn reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use XN series emergency stop switches (IO and IEC compliant). ee -314 for bottom view. Illuminated pushbutton operation Pushlock Turn eset utton is maintained when pressed and is reset when turned clockwise. W Dimensions Mushroom, LED illuminated (momentary/maintained) LD3/OLD3 (terminal screws M3.5) Integrated terminal cover 6, 12, 24V C/DC Without LED Lamp 100/110V C, 200/220V C 110V DC, 380V C or over ll dimensions in mm D 45.4 (1 block) 65.4 (2 or 3 blocks) 85.4 (4 blocks) (2 blocks), 95.5 (4 blocks) (2 blocks), (4 blocks) Mushroom Pushlock Turn eset, LED illuminated VLD (terminal screws M3.5) Integrated terminal cover 6, 12, 24V C/DC Without LED Lamp 100/110V C, 200/220V C 110V DC, 380V C or over 45.4 (1 block) 65.4 (2or 3 blocks) 85.4 (4 blocks) (2 blocks), 95.5 (4 blocks) (2 blocks), (4 blocks) Download catalogs and CD from /downloads -330

31 D eries hape D elector (Knob ) Knob D Package Quantity: 1 D 90 2-position 3-position (10) -1NC (11) (20) - (22) (20) (02) - (22) 4NO () 4NC (04) 3 Configuration lock 1 2 pring eturn from ight lock pring eturn from Left 1 2 D210N D2110N Dummy lock D211N D2111N D220N D2120N D222N D2122N Configuration lock Dummy lock pring eturn from ight pring eturn from Left 1 2 D2210N D2211N D2220N D2222N pring eturn Two-way D320N D3120N D3220N D3320N D302N D3102N D3202N D3302N D322N D3122N D3222N D3322N D3N D31N D32N D33N D304N D3104N D3204N D3304N D33N-243 Knob: lack ound bezel (metal): Chrome-plated elector switches with 1 or 3 contact blocks have a dummy block. Knob operator can be installed at every 45 degrees intervals in addition to the positions shown in the above table. ee -321 to -322 for other contact configurations. Turn the operator to each position accurately. elector switches with have a half contact operating current (load switching current value). ated insulation voltage and rated current remain the same. ee -308 for gold-plated silver contacts. ee -312 for bottom view. lock Dimensions ll dimensions in mm. 0.8 to position (3-position) ø (3 or 4 blocks) Terminal crews: M3.5 Terminal cover: integrated -331

32 DL elector (Lever ) Lever DL D eries Package Quantity: 1 hape 90 2-position 3-position (10) -1NC (11) (20) - (22) (20) (02) - (22) 4NO () 4NC (04) 3 Configuration lock 1 2 pring eturn from ight lock pring eturn from Left 1 2 D2L10N D21L10N Dummy lock D2L11N D21L11N D2L20N D21L20N D2L22N D21L22N pring eturn Configuration pring eturn from Left from ight lock 1 2 Dummy lock Lever: lack ound bezel (metal): Chrome-plated elector switches with 1 or 3 contact blocks have a dummy block. Knob operator can be installed at every 45 degrees intervals in addition to the positions shown in the above table. 1 2 D22L10N D22L11N D22L20N D22L22N pring eturn Two-way D3L20N D31L20N D32L20N D33L20N D3L02N D31L02N D32L02N D33L02N D3L22N D31L22N D32L22N D33L22N D3LN D31LN D32LN D33LN D3L04N D31L04N D32L04N D33L04N D3L3N-243 Turn the operator to each position accurately. elector switches with have a half contact operating current (load switching current value). ated insulation voltage and rated current remain the same. ee -308 for gold-plated silver contacts. ee -312 for bottom view. lock Dimensions ll dimensions in mm. 0.8 to position (3-position) D 65.4 (3 or 4 blocks) Terminal crews: M3.5 Terminal cover: integrated Download catalogs and CD from /downloads -332

33 D eries DK Key elector Key elector (Key No. 0) DK Package Quantity: 1 hape D 90 2-position 3-position (10) -1NC (11) (20) - (22) (20) (02) - (22) 4NO () 4NC (04) 3 Configuration lock pring eturn from ight lock pring eturn from Left D2K10N D21K10N Dummy lock D22K10N D2K11N D21K11N D22K11N D2K20N D21K20N D22K20N D2K22N D21K22N D22K22N Configuration pring eturn pring eturn pring eturn from Left from ight Two-way lock Dummy lock Cylinder: Chrome-plated ound bezel (metal): Chrome-plated Key selector switches with 1 or 3 contact blocks have a dummy block. On spring-returned types, the key can be released only from the maintained position. On maintained types, the key can be released from every position. ee -308 for specifying key retained positions. lock D3K20N D31K20N D32K20N D33K20N D3K02N D31K02N D32K02N D33K02N D3K22N D31K22N D32K22N D33K22N D3KN D31KN D32KN D33KN D3K04N D31K04N D32K04N D33K04N D3K3N-243 Key selector switch is supplied with two standard keys. (1) Insert the key completely before turning the key, otherwise failure will result. (2) Turn the operator to each position accurately. Different key number is available upon request. IDEC. elector switches with have a half contact operating current (load switching current value). ated insulation voltage and rated current remain the same. ee -308 for gold-plated silver contacts. ee -312 for bottom view. ll dimensions in mm. Dimensions 90 2-position (3-position) 65.4 (3 or 4 blocks) Terminal crews: M3.5 Terminal cover: integrated -333

34 LD Illuminated elector (LED) Illuminated elector (9 ase) LD D eries Package Quantity: 1 hape (24V C/DC) Configuration pring eturn from ight pring eturn from Left lock Operating lock Voltage V C/DC LD22211DN* LD212211DN* LD222211DN* -1NC (11) 100/110V C LD21611DN* LD211611DN* LD221611DN* /220V C LD22611DN* LD212611DN* LD222611DN* 2-position 24V C/DC LD22220DN* LD212220DN* LD222220DN* (20) 100/110V C LD21620DN* LD211620DN* LD221620DN* 200/220V C LD22620DN* LD212620DN* LD222620DN* 24V C/DC LD22222DN* LD212222DN* LD222222DN* PW - 100/110V C LD21622DN* LD211622DN* LD221622DN* (22) 200/220V C LD22622DN* LD212622DN* LD222622DN* Configuration pring eturn from pring eturn pring eturn from Left ight Two-way lock Operating Color Voltage Code V C/DC LD32220DN* LD312220DN* LD322220DN* LD332220DN* (20) 100/110V C LD31620DN* LD311620DN* LD321620DN* LD331620DN* 200/220V C LD32620DN* LD312620DN* LD322620DN* LD332620DN* 24V C/DC LD32202DN* LD312202DN* LD322202DN* LD332202DN* (02) 100/110V C LD31602DN* LD311602DN* LD321602DN* LD331602DN* 200/220V C LD32602DN* LD312602DN* LD322602DN* LD332602DN* 24V C/DC LD32222DN* LD312222DN* LD322222DN* LD332222DN* 3-position - 100/110V C LD31622DN* LD311622DN* LD321622DN* LD331622DN* (22) 200/220V C LD32622DN* LD312622DN* LD322622DN* LD332622DN* 24V C/DC LD322DN* LD3122DN* LD3222DN* LD3322DN* PW 4NO 100/110V C LD316DN* LD3116DN* LD3216DN* LD3316DN* () 200/220V C LD326DN* LD3126DN* LD3226DN* LD3326DN* 24V C/DC LD32204DN* LD312204DN* LD322204DN* LD332204DN* 4NC 100/110V C LD31604DN* LD311604DN* LD321604DN* LD331604DN* (04) 200/220V C LD32604DN* LD312604DN* LD322604DN* LD332604DN* pecify a color code in place of * in Part No. ee -309 for how to specify units without LED lamps. When using a commercially (red), (green), (yellow), (amber), (blue). PW (pure white) available lamp, choose a lamp with rated voltage 5 to 30V C/DC and 1W maximum, and ound bezel (metal): Chrome-plated with the same base and shape. Make sure of correct operation before installation. The Illuminated selector switches have an LED lamp installed. operation of illuminated selected switches cannot be guaranteed when a commercially Use a pure white (PW) LED for yellow () illumination. available lamp is used. ee -309 for other operating voltage such as 6V C/DC, 12V C/DC, and 110V DC. Turn the operator to each position accurately. Illuminated selector switches of 24V C/DC or below with 2 or 4 contact blocks have a ee -309 for gold-plated silver contacts. dummy block. ee -314 for bottom view. lock Dimensions 6, 12, 24V C/DC Without LED Lamp 0.8 to position (3-position) Color Code ll dimensions in mm. D ø25 (24V C/DC) 45.4 (1 block) 65.4 (2 or 3 blocks) 85.4 (4 blocks) 100/110V C, 200/220V C (2V C or below) to position (3-position) 110V DC 380V C or over Terminal crews: M to position (3-position) With transformer (100/110V C) (2 blocks), 95.5 (4 blocks) 27.6 ø (2 blocks), (4 blocks) Terminal crews: M ø Terminal cover: integrated Download catalogs and CD from /downloads -334

35 D eries D2 elector Pushbuttons hape Configuration ing (90 2-position) D2 11 (-1NC) Code 03 lock Left ing ight Pushbutton Normal Push Normal Push utton Color Code Package Quantity: 1 ing Part No. (Ordering No.) D211N-03* 08 D222N-08* C10 D222N-C10* 22 D10 (-) D222N-D10* E10 D222N-E10* F10 D222N-F10* pecify a color code in place of * in Part No. (black), (green), (red), (yellow) ezel (metal): Chrome-plated codes E and F: The right and left NC contact blocks on circuit code E or F may overlap each other while turning the ring operator. The NO and NC contact blocks on circuit code F may overlap each other while pressing the button. When using the selector pushbutton, do not turn the ring operator with the pushbutton depressed. Otherwise, damage or failure may be caused. elector switches with have a half contact operating current (load switching current value). ated insulation voltage and rated current remain the same. ee -312 for bottom view. lock Dimensions ing operator (90 2-position) 0.8 to position ll dimensions in mm. D 65.4 (3 or 4 blocks) Terminal crews: M3.5 Terminal cover: integrated -335

36 ound PD1 (ound) hape Illumination ase Operating Voltage Part No. (Ordering No.) Color Code D eries Package Quantity: 1 LED Lamp Part No. 24V C/DC PD122DN*,,,,, PW LTD-2* (24V C/DC) LED 9 100/110V C PD116DN*,,,,, PW 200/220V C PD126DN*,,,,, PW pecify a color code in place of * in Part No. (red), (green), (yellow), (amber), (blue), PW (pure white) ound bezel (metal): Chrome-plated Pilot lights have an LED lamp installed. Use a pure white (PW) LED for yellow () illumination. ee -309 for other operating voltage such as 6V C/DC, 12V C/DC, and 110V DC. ee -309 for how to specify units without LED lamps. When using a commercially available lamp, choose a lamp with rated voltage 5 to 30V C/DC and 1W maximum, and with the same base and shape. Make sure of correct operation before installation. The operation of pilots lights cannot be guaranteed when a commercially available lamp is used. Terminal cover is installed on pilot lights for electric shock prevention. Type Terminal Cover Quantity 6V, 12V, 24V C/DC PN-PVL 1 100V/110V C, 200/220V C N-VL V DC N-VL3 1 Note: DC-DC converter types are not approved by UL and, and not CE compliant. ee -314 for bottom view. LTD-6* Dimensions ound, LED illuminated 6V, 12V, 24V C/DC Without LED Lamp (Terminal Cover: PD-PVL) 100 to 480V C, 110V DC (Terminal Cover: N-VL3) M3.5 Terminal crew 0.8 to M3.5 Terminal crew ll dimensions in mm. 37 ø ø Terminal crews: M3.5 Terminal crews: M3.5 ee -349 for wiring. D Download catalogs and CD from /downloads -336

37 /D eries Nameplates Model Legend Material Part No. Ordering No. Package Quantity Dimensions (mm) N NLO For /D lank With Legend lank luminium 1.2 mm thick White letters on black background luminium 1.2 mm thick lack N-0 N- NLO N-0 1 N-0PN10 10 N- 1 N-PN10 10 NLO For /D pecify a legend code in place of in the Ordering No. Legends : Code Legend 1 ON 2 OFF 3 TT 4 TOP 31 OFF ON 35 HND UTO HND OFF 53 UTO NLOPN hape and Engraving rea N NLO ll dimensions in mm. D Example (when the legend height is 4 mm) hape Engraving rea (mm) Height Width Max. No. of Lines No. of Letters on 1 Line N NLO

38 Locking ing Wrench hape Material Part No. For /D Lamp Holder Tool ccessories For /D lock emoval Tool For ubber oot For momentary 1 layer of contact blocks (2 contact blocks) Nitril rubber (black) Ordering No. O-12 O-12 1 Nitril rubber (black) O-55 O-55 1 Metal (zinc-plated) ubber (nitryl) TW-KC1 TW-KC1 1 /D eries Package emarks Quantity Used to tighten the round bezel when installing the or ø25 switch onto a panel from the front. : TW series (ø25) : /D series () ø25 ø26 ø29 ø46 ø45 ø37 Used to install and remove the LED/incandescent lamps. ee : For 9 base : For E12 base O Used to remove transformer units. ee -347 for how to use ll dimensions in mm ubber boot used to prevent oil and dirt from entering into the contact block. 44 Temperature range: 5 to +60 C 39 ø34 ø19 23 nti-rotation ing For For /D ubber Hole Plug Plastic Hole Plug For /D For /D Metallic Hole Plug For /D Nitril rubber (black) Metal (diecast) (zinc-plated) Nitril rubber (black) OC-99 OC-99 1 OL-11 OL-11PN10 10 O-13 O-13PN05 Nitril rubber (gray) O-13 O-13PN05 Plug: plastic (gray) asket: Chloroprene rubber Locking ring: diecast zinc Plug: plastic (gray) asket: Chloroprene rubber Locking ring: diecast zinc OP-11 OP-11 1 O-11 O When inserting a cable, cut the projection on the cover to match the cable size. Used to prevent the operator from turning. enerally used when using no nameplates on selector switches and selector pushbuttons. ee -345 for installation. Cannot be used for pin lock. Used to plug unused.5 mm mounting holes. Degree of protection: IP 52 ø2.2.5 ø34 18 ø3 ø Tightening torque: 1.2 N m. Degree of protection: IP65 (when there is no anti-rotation ring hole) upplied with a locking ring. ø36 asket M30 P1.5 crew Locking ing Tightening torque: 1.2 N m. Degree of protection: IP65 (when there is no anti-rotation ring hole) upplied with a locking ring. ø36 asket M30 P1.5 crew Locking ing D Download catalogs and CD from /downloads -338

39 D /D eries ccessories utton Cover for Extended Pushbuttons hape Material Part No. For /D For flush pushbuttons Nitril rubber ezel: diecast zinc EPDM rubber For extended pushbuttons For /D Dust-proof ubber Cover for Jumbo Mushrooms Padlock Cover For /D For /D Padlock Cover for Key elector Nitril rubber (black) Polyarylate (gasket: nitryl rubber) Metal Paint: red (zinc-plated brass) Ordering No. lack OC-11 OC-11 ed OC-11 OC-11 reen OC-11 OC-11 ellow OC-11 OC-11 OC-121 OC OC-122 OC OC-4N OC-4N 1 OL-KL1 OL-KL1 1 H9Z-PC30 H9Z-PC30 1 Package emarks Quantity Metallic bezels covered with a rubber boot to enhance waterproof characteristics. utton is not included. pplicable to extended pushbuttons only. Oil-proof 1 Operating temperature: 5 to +60 C. Used to cover and protect pushbuttons where units are subject to water splash. Not suitable for outdoor use or where the units are subject to oil splash. Part No. OC OC Used for N4 and D4 pushbuttons. ø80 ø28 ø38 M30 P to 5.5 Used to protect pushbuttons and illuminated pushbuttons (momentary/maintained) with 24 mm max. height from the panel, and selector switches (knob operator). Not used for the following models. Pushbuttons Mushroom with full shroud Mushroom Jumbo mushroom with shroud Illuminated Pushbuttons With half shroud With full shroud elector Lever operator Key selector switch with key installed pplicable model Key selector switches NK/DK ee padlock cover catalog for operating instruction. Material: PCC 1.6 mm-thick ed paint ivet: tainless teel Material: PCC 2 mm-thick Outside diameter: ø50 Inside diameter: ø ø mm-thick ll ll dimensions dimensions in in mm. mm to 3.2 Key Hole ø Waterproof ubber asket 0.5t ø For /D For Flush Pushbuttons Used to protect flush pushbuttons from inadvertent operation. Can be easily attached using the locking ring Metal (zinc-plated brass) OL-C OL-C 1 Centers 50 min For /D -339

40 ccessories Metallic ezel hape Material Part No. Ordering No. Package Quantity /D eries ll ll dimensions in in mm. mm. emarks Metal (diecast zinc: chrome-plated) O-11 O-11PN02 2 Cannot be used with pin lock, selector pushbuttons, and monolever units. /ø26, height 9 Plastic ezel For /D Polycarbonate OP-11* OP-11*PN02 2 pecify a color code in place of *. (black), (green), (red), W (white), (yellow) Cannot be used with pin lock, selector pushbuttons, and monolever units. /ø26, height 9 Octagonal Metal ezel For Flush W35 (37.6) H9 Extended W35 (37.6) H16 For TWDN Clear Plastic hroud for Flush Pushbuttons Metal (diecast zinc: chrome-plated) O-81 O-81PN02 2 O-82 O-82 1 Use with TWDN series diecast zinc switches and pilot lights. Cannot be used with half-shrouds. crylic (clear) OP-13 OP-13PN02 2, height 14 For Clear Plastic hroud for Extended Pushbuttons Clear plastic full shroud. crylic (clear) OP-14 OP-14PN02 2, height 20.6 For Clear Plastic hroud for Illuminated Pushbuttons D crylic (clear) OP-1411 OP uttons may protrude slightly depending on the panel thickness. hroud:, height 20.6 Metal Nut ing: height 4 For Metal Nut ing for Illuminated Pushbuttons Metal (diecast zinc) OL-11 OL-11PN05 5 Metal nut ring for OP-1411 only., height 4 For Download catalogs and CD from /downloads -3

41 /D eries utton for Pushbuttons For /D utton for Illuminated Pushbuttons For /D elector ccessories hape Material Part No. Ordering No. Flush ø24.6, height 4 Extended ø24.6, height 9 Mushroom, height 16.2 Jumbo Mushroom ø65, height 23.2 utton for Pin Lock (D8P) ø23.6, height 3 Pushlock Turn eset (VN3, VD3), height 18.5 Push Turn Lock (JN3, JD3), height 18.5 Extended (LN2, LD2) ø24, height 18.5 Pushlock turn reset (VLN3, VLD3), height 18.5 Knob operator ø25, height 20.5 Lever operator ø25, height 20.5, length 37.5 Color insert Width 21, depth 5, height 18 Polyacetal resin resin Polyacetal Package Quantity N1N-* N1N-*PN05 5 N2N-* N2N-*PN05 5 N3N-* N3N-*PN02 2 N4N-* N4N-* 1 W1-* W1-*PN05 5 Color Code * (black), (green), (red), (yellow), (blue), W (white) (black), (green), (red), (yellow), (blue) (black), (green), (red), (yellow), (blue), W (white) VN3-* VN3-* 1 (red), (yellow) JN3-* JN3-* 1 LN2L-* LN2LD-* LN2L-*PN05 LN2LD-*PN05 VLN3L- VLN3L-PN02 2 (red) only NHT-* NHL-* NHT-*PN02 NHL-*PN02 TW-HC1* TW-HC1*PN (black), (green), (red), (yellow) (red), (green), (blue) (yellow), (amber), W (white) pecify W for PW (pure white) illumination. 2 (black), (green), (red) (black), (green), (red), (yellow), (blue), W (white) ll dimensions in mm. D For /D Knob for illuminated selector switch (LN, LD) ø25, height 28 resin LNH-* LNH-* 1 (green), (red), (blue) LNHD-* LNHD-* 1 (amber), W (white), (yellow) pecify W for PW (pure white) illumination. Lens for ound (PN1, PD1) ø24.6, height 28, M20 For /D PN106LN-* PN106LN-*PN05 5 (red), (green), (yellow) (amber), W (white), (blue) pecify W for PW (pure white) illumination. Marking Plate For ectangular (UPQN4) Width 36, depth 30, height 8.5 For quare extended (UPQN3) 25, height 26.5 For ectangular pilot lights (UPQN4) Width 29.8, depth 23.8, thickness 2 resin UPQN6L-* UPQN6L-*PN05 UPQN6LD-* UPQN6LD-*PN05 (yellow), (amber) ULQN06L-* UPQN06LD-* ULQN06L-*PN05 UPQN06LD-*PN05 crylic UPQN6N-W UPQN6N-WPN (red), (green), C (clear), (blue) pecify W for PW (pure white) illumination. (red), (green), (blue) (yellow), (amber), W (white) pecify W for PW (pure white) illumination. W (white) only ee -346 for engraving area. -341

42 Maintenance Parts hape Material Part No. Ordering No. ubber Washer (1.5 mm-thick) For /D ubber Washer (3.0 mm-thick) For /D hroud for Pushbuttons ubber (synthetic soft vinyl) ø39/ø29.5, height 1.5 ubber (synthetic soft vinyl) ø39/ø29.5, height 3 Half shroud /ø27, height 20.5 Package Quantity /D eries ll dimensions in mm. emarks OW-11 OW-11PN10 10 To tighten mounting panels OW-12 OW-12PN10 10 To tighten mounting panels N2 N2 1 With nut ring (, height 4) Full shroud /ø28.5, height 16.5 N2F N2F 1 Full shroud (for mushroom pushbuttons) ø48, height 20 N3 N3 1 hallow shroud (for jumbo mushroom) ø75, height 18 N4 N4 1 For /D hroud for Illuminated Pushbuttons Deep shroud (for jumbo mushroom) ø75/ø69, height 33 Half shroud (For 9 base) /ø27, height 25 N4F N4F 1 LN2L LN2L 1 With nut ring (, height 4) For /D Full shroud (For 9 base) /ø29.5, height 22.5 LN2FL LN2FL 1 With nut ring (, height 4) pare Key For Key elector For /D pare Key For Key elector For Metal Nickel plated brass Length 3, width 19.7, thickness 1.8 Metal Nickel plated brass Length 37.5, thickness 2 TW-K-0 TW-K-0PN02 2 NKN DKN N-K-241 N-K-241PN02 2 NK-N0241 D Pin/Chain Kit For D8P Pin: Nickel plated brass D8P-PIN D8P-PIN 1 Pin, chain, and plate for N8P Pin (ø4.6) For D lock Plug For /D Polyamide HW9Z-CPL HW9Z-CPLPN10 10 Used to plug the hole in the center of a contact block. Download catalogs and CD from /downloads -342

43 D /D eries block HW-U Dummy lock hape Description Part No. Ordering No. For /D, 11g approx. For /D 3.5g approx. Full Voltage dapter For Illuminated (*1) For /D 12g approx. Transformer Unit For Illuminated (*1) For /D 66g approx. Transformer Unit For (*1) NO contact NC contact EM contact (early make) L contact (late break) HW-U10 HW-U10-MU HW-U01 HW-U01-MU HW-U10 HW-U10-MU HW-U01 HW-U01-MU HW-U10 HW-U10-MU HW-U01 HW-U01-MU HW-U10 HW-U10-MU HW-U01 HW-U01-MU Package Quantity Polyamide HW-D HW-DPN10 10 Polyamide HW-1N HW-1NPN /110V C HW-T16 HW-T /220V C HW-T26 HW-T26 1 For /D 200/220V C TW-026 TW g approx. *1) For use as maintenance parts. Do not use for expansion or remodelling purposes. LED Lamps (Use LED lamps for replacing incandescent lamps) LTD LETD Maintenance Parts Model Operating Voltage 6V C/DC emarks Housing color: lue Push rod color: reen MU has gold contacts Housing color: eddish purple Push rod color: ed MU has gold contacts Housing color: lue Push rod color: lack MU has gold contacts Housing color: eddish purple Push rod color: White MU has gold contacts For HW-U contact blocks Used when the number of contact blocks and full voltage adapters is 1 or 3. pplicable model: Illuminated pushbuttons Illuminated selector switches pplicable load (LED lamp) LTD-6 (6V C/DC) LTD-1 (12V C/DC) LTD-2 (24V C/DC) pplicable model: Illuminated pushbuttons Illuminated selector switches pplicable load (LED lamp) LTD-6 (6V C/DC) 100/110V C TW-016 TW screws are not included. ee -347 for mounting screws. Current Draw DC 7m (,, W) 5.5m (,, PW) DC 8m 12V C/DC 10m 11m LTD-1* 24V C/DC 10m 11m LTD-2* 6V C/DC 12V C/DC 14m (,, W) 5.5m (,, PW) 6.5m (10m: at 15V) 17m (,, W) 8m (,, PW) 7m (11m: at 15V) 24V C/DC 10m 11m LETD-2* pecify a color code in place of * in Part No. (red), (green), (amber), W (white), (blue), PW (pure white) Use a PW (pure white) LED for (yellow) illumination. LED lamps for replacing incandescent lamps Incandescent Lamp Model (mm) Part No. Operating Voltage Lamp ating L L-6 6V C/DC 1W (6V) L-8 12V C/DC 1W (18V) ulb: ø11 L-2 18V C/DC 1W (24V) Length: 23 L-3 24V C/DC 1W (30V) LE LE-6 6V C/DC 2W (6V) ulb: ø13 Length: 34 LE-8 12V C/DC 2W (18V) LE-2 18V C/DC 2W (24V) LE-3 24V C/DC 2W (30V) ase 9 /13 E12 /15 pplicable load (LED lamp) LTD-6 (6V C/DC) ll ll dimensions dimensions in in mm. mm. Part No. Ordering No. Color Code Package Quantity LTD-6* LTD-6* 1 LTD-6*PN10 10 LTD-1* 1,,, W,,PW LTD-1*PN10 10 LTD-2* 1 LTD-2*PN10 10 LETD-6* LETD-6* 1 LETD-6*PN10 10 LETD-8* LETD-8* 1,,, W,, PW LETD-8*PN10 10 LETD-2* 1 LETD-2*PN10 10 eplacement LED Lamp Part No. Color Code Operating Voltage LTD-6* 6V C/DC LTD-1*,,,, 12V C/DC LTD-2* PW 24V C/DC LTD-2* 24V C/DC LETD-6* 6V C/DC LETD-8*,,,, 12V C/DC LETD-2* PW 24V C/DC LETD-2* 24V C/DC ase 9 /13 E12 /15 ase 9 /13 E12 /15 When using a commercially available incandescent lamp, choose a lamp with the same dimensions, operating voltage, and base. pecify a color code in place of * in Part No. (red), (green), (amber), (blue), PW (pure white) Use a PW (pure white) LED lamp for (yellow) illumination. For O (orange) and C (clear) color code of incandescent lamp, use (amber) LED lamp. -343

44 For 6V Transformer hape Operating Voltage Voltage ange Part No. (Ordering No.) 100/110V C ±10% TW516 /D eries pplicable Load LTD-6* (6V C/DC, LED lamp) 200/220V C ±10% TW526 0/44V C ±10% TW546 pecify a color code in place of * in Part No. (red), (green), (amber), (blue), PW (pure white) For 24V 100/110V C ±10% TW /220V C ±10% TW522 0/44V C ±10% TW542 LTD-2* (24V C/DC, LED lamp) pecify a color code in place of * in Part No. (red), (green), (amber), (blue), PW (pure white) Terminal cover (TW-VL3) is installed on transformers as standard. pecifications Dimensions ll dimensions in mm. Part No. TW56 TW52 ated Voltage 100/110V C, 200/220V C, 0/4V C (50/60 Hz) Current Draw 2.4V ated Insulation Voltage 600V Insulation esistance 100MΩ minimum (500V DC megger) Operating Temperature 30 to 60 C (no freezing) Operating Humidity 35 to 85% H (no condensation) torage Temperature to +80 C (no freezing) Vibration esistance Damage limits: 30 Hz, amplitude 1.5 mm Operating extremes: 5 to 55 Hz, amplitude 0.5 mm M3.5 Terminal crews econdary ide 2-ø3.3 Hole Primary ide hock esistance 1000 m/s m/s 2 Dielectric trength 2500V C, 1 minute Terminal crew M3.5 pplicable Wire 2 mm 2 maximum, 2 wires maximum Weight 87g Terminal Cover ccessories hape Material Part No. Ordering No. Package Quantity Dimensions (mm) DIN 35 mm ail luminum Length: 1000 mm PN D Weight: 200g approx. DIN 35 mm ail teel Length: 1000 mm P1000 P1000PN Weight: 320g approx End Clip Metal (zinc-plated steel) M4 screw Weight: 15g approx. pplicable rail: 1000 P1000 NL6 NL6PN ee H-071 for DIN rail products. Download catalogs and CD from /downloads -344

45 D /D eries afety Precautions Turn off the power to the /D switches & pilot lights before starting installation, removal, wiring, maintenance, and starting installation, removing, wiring, maintenance, and inspection of the products. Failure to turn power off may cause electrical shocks or fire hazard. To avoid a burn on your hand, use the lamp holder tool when replacing lamps. For wiring, use wires of a proper size to meet the voltage and current requirements. Tighten the terminal screws to the recommended tightening torque (see -349). Failure to tighten terminal screws may cause overheat and fire. Operating Instructions Panel 1. emove the locking ring from the operator and check that the rubber gasket is in place. For mushroom and jumbo mushroom switches, remove the button before removing the locking ring. 2. djust the thickness of the rubber washers according to the panel thickness. 3. Insert the switch into the panel from the back of the panel. 4. On the panel front, install the nameplate and locking ring. For mushroom and jumbo mushroom switches, install the button before installing the locking ring. ubber asket Panel and ubber Washer djust the thickness of the rubber washers according to the panel thickness as shown in the tables below. lso, make sure to include the nameplate thickness when using a nameplate. pplicable Model /D series Pushbutton (flush/extended/mushroom/jumbo mushroom) Illuminated pushbutton (extended/mushroom) Pilot light (except for square type) Panel ubber Washer Thickness (mm) 1.5 mm-thick 3.0 mm-thick upplied 2 pieces to pieces to to to /D series Pushbutton (extended with half shroud) Illuminated pushbutton (extended with half shroud) Panel ubber Washer Thickness (mm) 1.5 mm-thick 3.0 mm-thick upplied to to /D series Pushbutton (extended with full shroud) Panel ubber Washer Thickness (mm) 1.5 mm-thick 3.0 mm-thick upplied 2 pieces to pieces to to to Nameplate ubber asket Locking ing /D series Illuminated pushbutton (extended w/full shroud) Mushroom with full shroud Panel Thickness (mm) ubber Washer 1.5 mm-thick 3.0 mm-thick upplied 2 pieces to pieces to to to 6.0 (6.5) *1 1 *1: (6.5) is for mushroom pushbuttons with full shroud D series Pin lock pushbutton Panel Thickness (mm) ubber Washer 1.5 mm-thick 3.0 mm-thick upplied 2 pieces to pieces to to to /D series Other models (excluding square) Panel Thickness (mm) ubber Washer 1.5 mm-thick 3.0 mm-thick upplied 2 pieces to pieces to to to ee -324 for square pilot lights about installing on the panel and replacing LED lamps. The number of rubber washers shown in the dimensions of /D series may differ from the number of rubber washers supplied. When using a commercially available lamp, choose a lamp with rated voltage 5 to 30V C/DC and 1W maximum, and with the same base and shape. Make sure of correct operation before installation. The operation of illuminated pushbutton switches cannot be guaranteed when a commercially available lamp is used. Notes for Panel Locking ring wrench recommended torque Tighten the bezel to a tightening torque of 3.0 to 3.5 N m. Locking ring wrench Locking ring wrench (O-12) can be used to tighten the bezel. Use side to tighten. ide : For /D series ide : TW series Installing the nti-rotation ing (OL-11) nti-rotation rings are used on selector switches or pushbuttons which rotate and used when using no nameplates. Insert a 1.5 mm-thick rubber washer between the panel and the anti-rotation ring as shown on the right. To install, adjust the panel thickness by taking the thickness of anti-rotation ring (OL-11) into consideration. Locking ring wrench (O-12) Panel eplacement of LED Lamps Lamps can be replaced by using the lamp holder tool (O-55) from the front of the panel. (ee -338 for lamp holder tool.) How to emove To remove, slip the lamp holder tool onto the lamp head lightly. Then push slightly, and turn the lamp holder tool counterclockwise. Lamp Holder Tool (O-55) How to Install To install, insert the lamp head into the lamp holder tool. Place the two pins on the lamp base to the grooves in the lamp socket. Inset the lamp and turn it clockwise. Two Pins Lamp Holder Tool (O-55) nti-rotation ing OL-11 (0.8 mm) ubber Washer ubber Washer 1.5 mm-thick -345

46 Operating Instructions Installing/emoving the uttons and Lenses To install Pushbutton button Flush/Extended Push in the button to install. To remove Notches on the operating shaft The operating shaft has four notches as shown at right. Insert a flat screwdriver (3 mm max.) into one of the notches, and tilt the screwdriver to remove the button. Make sure to insert a flat screwdriver into one of the notches, otherwise the pushbutton may be damaged. Notes on button removal To avoid damaging the bezel or the button, remove the bezel from the pushbutton before inserting a flat screwdriver. Mushroom/ Jumbo Mushroom utton has threads. Turn clockwise to install the button. Illuminated Pushbutton Lens Extended/Mushroom Lens has threads. Turn clockwise to install the lens. Pilot Light Lens ound Lens has threads. Turn clockwise to install the lens. Insert a flat screwdriver between the button and the bezel to remove the button (see below for details). <Notches> Turn the button counterclockwise to remove. Turn the lens counterclockwise to remove. Turn the lens counterclockwise to remove. Marking Plate on ectangular Marking Plates (for UPQN4) emoving Insert a flat screwdriver between the lens and bezel, and tilt the screwdriver to remove the lens. Engraving rea Material: crylic resin ize: 29.8 W 23.8 D, thickness 2.0 mm Engraving area: 28 W 22 D 1.0 mm height max. /D eries Installing the Half hroud on Extended Pushbuttons/ Illuminated Pushbuttons Half hroud Parts shroud is installed in the shroud locking ring. Tightening the shroud locking ring in the switch locks the shroud. Nut ring white marking plate is installed in the lens which can be removed easily. Engraving rea hroud hroud Locking ing Installing the Half hroud djust the thickness of the rubber washers according to the panel thickness (see -345). Insert the switch into the panel from the back of the panel. Install the nut ring from the panel front to tighten the switch. Install the half shroud on the upper side of the switch, and tighten the shroud locking ring. Make sure that the shroud is securely fastened inside the shroud locking ring. Tightening the Half hroud lign the three projections on the shroud with the groove on the switch, and tighten the shroud on the upper side of the switch. Tighten the shroud locking ring. rubber gasket is installed between the lens and operator on pilot lights. Make sure that the rubber gasket is in place when installing the lens. (1) Three projections on the shroud (2) rooves on the threads (3) Complete TOP rooves on the threads D (The shroud is installed in the shroud locking ring.) (Four grooves on up, down, right, and left) hrouds may rattle depending on the panel thickness. gap may appear between the nut ring and the shroud locking ring depending on the panel thickness. Download catalogs and CD from /downloads -346

47 /D eries Operating Instructions elector Turn the operator such as knob, lever, and key to each position accurately. eleasing halfway may cause the operator to return to the former position, or to get stuck between. On spring return two-way types, the center of operators may be misaligned slightly. Key elector Insert the key completely before turning. Failure to do so may cause failures. Installing the on elector Install the switch with TOP marking facing upward, so that the operator can be installed on the switch in the correct direction. On non-illuminated models, install the color insert in the middle of operator. The color insert also serves to retain the operator. On illuminated models, align the operator with the switch by confirming the TOP marking on the switch and also the switch operation. Then press in the operator into the switch. Installation of elector s The shaft of each non-illuminated selector switch has a recess to identify in which direction to install the operator. lign the operator with the recess and press in the operator. Press a color insert (non-illuminated) into the operator (illuminated selector switches do not have a recess on the shaft). TOP 90 2-position TOP 3-position TOP marking Color Insert TOP marking emoval emoving the from elector Insert a flat screwdriver into the recess under the color insert. Turn the screwdriver to push out the insert from the operator. emoving the from Illuminated elector Insert a flat screwdriver (4 to 5 mm) into the recess at right or left under the operator and tilt. The operator is displaced slightly. Insert the flat screwdriver into the other recess and tilt. The operator can be removed. emoving the locks/full Voltage dapters Insert a flat screwdriver (4 to 6 mm) into the snap-fit latches of the contact block or full voltage adapter and lift to remove. Latches Pull out the operator sideways as shown in the left photo to remove the operator. Make sure to lift both latches. blocks cannot be removed by lifting one latch only. Do not apply excessive force to the latches, otherwise damage maybe caused. Transformer Units and DC-DC Converters Insert the end of the contact block removal tool (TW-KC1) into the snap-fit latch of the transformer units or DC-DC converter and pull the tool forward. The contact block removable tool cannot be used to remove the HW-U contact blocks or full voltage adapters. lock emovable Tool (TW-KC1) D ecess The non-illuminated operators can be installed in positions other than the standard position shown above tandard positions 2 When replacing parts (contact block, dummy block, full voltage adapter, transformer) for maintenance, make sure to install the parts to the original position. Otherwise proper operation cannot be guaranteed. Transformer Units and DC-DC Converters for Unfasten the two mounting screws on the back to remove the transformer unit/ DC-DC converter. screw screw screws PN: M3 6 (screw diameter ø5.5 or below) PD: M3.5 6 (screw diameter ø5.5 or below) -347