ø30mm Series Switches & Pilot Lights

Transcription

1 ømm Series Switches & Pilot ights

2 ø ø Series Switches & Pilot ights (Selection Guide) Function ategory XN Series Emergency Stop Switch HN Series Emergency Stop Switch Plastic Bezel Flush Bezel Padlockable Pushlock Pull/Turn eset Pushlock Pull/Turn eset Pushlock Turn eset Pushlock Turn eset ømm Mushroom Shape Model XNE-BV XNE-V XNE-TV XNE-BV XNE-BV XNE-V XNE-TV XNE-B XNE- XNE-T HNE-BV HNE-V Page Function ategory Pushbutton Flush Extended Extended with Half Shroud Extended with Full Shroud Momentary/ Shape Model ABN AON (Diecast) ABD AOD ABN AON (Diecast) ABD AOD ABNG AONG (Diecast) ABGD AOGD ABNF AONF (Diecast) ABFD AOFD Page Function Pushbutton ategory Mushroom Momentary/ Mushroom with Full Shroud Palm Mushroom Jumbo Mushroom with Shallow Shroud Momentary Jumbo Mushroom with Deep Shroud Shape Model ABN AON (Diecast) ABD AOD ABNG (Diecast) ABGD AOGD ABN (Diecast) ABD ABNG (Diecast) ABGD ABNF Page (Diecast) ABFD Function Pushbutton ategory Key ON/OFF ock Mushroom Pushlock Turn eset Mushroom Push Turn ock Mushroom Pushlock Key eset Jumbo Mushroom Pushlock Key eset Shape Model ABN AVN (Diecast) AVD AJN (Diecast) AJD ABNK ABNK Page

3 ø Series Switches & Pilot ights (Selection Guide) ø Function Pushbutton ategory Toggle ever Pin ock Mushroom Pull Mushroom Push-Pull Square Flush Momentary Shape Model ATN ABNP (Diecast) ABDP ATN (Diecast) AZD ATN ATN (Diecast) AYD UBQN Page Function Pushbutton Twin Pushbutton ategory Square Extended Square Twin Square Twin Momentary Momentary Flush Twin Mushroom Twin Shape Model UBQN UWQN UWQN ABBN ABBN Page Function Pilot ight (ED) ategory Dome Square ectangular (Marking) Shape Model APN APNE (Diecast) APD APDE UPQNB UPQN UPQNE Page Function Pilot ight (Incandescent) ategory Dome (W) Dome (W) ectangular (Marking) (W/W) Square Flush (W) Dome (W) Push-to-heck Shape Model APN (Diecast) APD APN APNE (Diecast) APD APDE UPQN UPQNE UPQNB APN*P Page

4 ø ø Series Switches & Pilot ights (Selection Guide) Function Illuminated Pushbutton (ED) ategory Extended Extended with Half Shroud Momentary/ Extended with Full Shroud Mushroom Mushroom Pushlock Turn eset Shape Model AN ANE AON AONE (Diecast) AD AOD AGN AGNE AOGN AOGNE AFN AFNE AOFN AOFNE (Diecast) AFD AOFD AN ANE AON AONE (Diecast) AD AOD AVN AVNE (Diecast) AVD AVDE Page Function ategory Illuminated Pushbutton (ED) Mushroom Push Turn ock Extended Illuminated Pushbutton (Incandescent) Extended with Half Shroud Extended with Full Shroud Momentary/ Momentary Momentary/ Square Flush Shape Model AJN AN ANE AON AONE (Diecast) AD AOD AN G ANE G AN F ANE F AON F AONE F (Diecast) AFD AOFD UQN UOQN Page Function Illuminated Pushbutton (Incandescent) ategory ectangular Momentary/ Turn ock Mushroom Pushlock Turn eset Mushroom Push Turn ock Shape Model UQN B UOQN B AN AVN AVNE (Diecast) AVD AVDE AJN Page Function Selector Switch Illuminated Selector Switch (ED/Incandescent) ategory Knob ever Key Knob Shape Model ASN ASTN (Diecast) ASD ASN ASTN (Diecast) ASD ASN K ASTN K (Diecast) ASD K ASN (Diecast) ASD Page,,,

5 ø Series Switches & Pilot ights (Selection Guide) ø Function Selector Pushbutton Mono-ever Switch ategory ing ever Standard Interlocking Shape Model ABN (Diecast) ASBD ABN (Diecast) ASBD AN ANS AN Page Function am Switch ategory Knob Key Enclosed Spring eturn Enclosed Shape (ASNO only) (ASNK only) Model ASNO ASSO ASNK ASSK USQO USQM Page

6 ø XN Series Emergency Stop Switches ø mm, -contact Emergency Stop Switch. Padlockable and flush bezel are available. Padlockable, flush bezel, ømm jumbo mushroom, illuminated, ED push-on are available. IDE s original Safe break action and reverse energy structure ensure the highest level of safety. Safety lock mechanism (IE --,.) Direct opening action mechanism (IE --,., IE--, Annex K) Short depth behind the panel only. mm for -contact, illumi nated (flush bezel:. mm, padlockable:. mm) Padlockable can be locked using padlocks when latched (main contact: OFF). The rugged aluminum diecast shroud allows for installing a maximum of padlocks using a hasp (total weight: g maximum). Gold-plated silver contacts. ed (Munsell /) or bright red (Munsell../) colors are available. Direct Opening Action Standards Applicable Standards U SA. No. IE-- U NFPA EN-- Mark File No. or Organization U/c-U File No. E (padlockable only) U isting File No. E TÜV SÜD EU ow Voltage Directive GB. No. ontact atings N main contacts (black)/no monitor contacts (blue) ated Insulation Voltage (Ui) V ated Thermal urrent (Ith) A ated Operating Voltage (Ue) V V V ated Operating urrent Main ontacts Monitor ontacts A / Hz D A / Hz D ontact Material esistive oad (A-) Inductive oad (A-) esistive oad (D-) Inductive oad (D-) esistive oad (A-) Inductive oad (A-) esistive oad (D-) Inductive oad (D-) A A A.A A.A.A A.A.A.A.A.A.A A.A.A A.A.A Gold-plated Silver Minimum applicable load: V A/D, ma (reference value) (May vary depending on the operating conditions and load types.) The rated operating currents are measured at resistive/inductive load types specified in IE --. Illumination atings (ED) ated Voltage Operating Voltage ated urrent V A/D V A/D ±% ma Specifications IE--, EN-- Applicable Standards IE--, EN-- JIS --, U, U, NFPA SA. No., GB. Operating Temperature Non-illuminated: to + (no freezing) Illuminated: to + (no freezing) Storage Temperature to + Operating Humidity to % H (no condensation) Minimum Force equired for Direct Opening Action N Minimum Operator Stroke equired for Direct Opening Action Maximum Operator Stroke ontact esistance. mm. mm mω maximum (initial value) Insulation esistance MΩ minimum (V D megger) Overvoltage ategory II Impulse Withstand Voltage. kv Pollution Degree Operating Frequency operations/hour Shock esistance Operating extremes: m/s Damage limits: m/s Vibration esistance Durability (at operations/h, on-duration %) Degree of Protection Short-circuit Protection onditional Short-circuit urrent Terminal Style ecommended Tightening Torque for Terminal Operating extremes: to Hz, amplitude. mm, acceleration m/s Damage limits: to Hz, amplitude. mm, acceleration m/s Mechanical:, operations minimum Electrical:, operations minimum, operations minimum (V A/D, ma) Operator: IP (IE) Terminal: IP (when XWZ-VMF is installed) V/A fuse (Type am, IE-/IE-) A M screw terminal. to. N m ecommended Tightening Torque for ocking ing. N m Applicable Wire Size. to. mm (AWG to ) Total Weight of a Hasp and Padlocks g maximum (padlockable) einforced Insulation (IE -) Weight Between live part and metal bezel (flush bezel, padlockable) g (XNE-VQM) g (XNE-BVM) g (XNE-VQM) g (XNE-QM)

7 XN XN Series Emergency Stop Switches ø Plastic Bezel Non-illuminated Pushlock Pull/Turn eset (Solder Terminal) Shape N Main ontact NO Monitor ontact IP Fingersafe Terminal Part No. w/terminal over ømm Mushroom N XNE-BVMF➀ XNE-BVM➀ N XNE-BVMF➀ XNE-BVM➀ N XNE-BVMF➀ XNE-BVM➀ N XNE-BVMF➀ XNE-BVM➀ N NO XNE-BVMF➀ XNE-BVM➀ N NO XNE-BVMF➀ XNE-BVM➀ N NO XNE-BVMF➀ XNE-BVM➀ N XNE-BVMF➀ XNE-BVM➀ ømm Jumbo Mushroom N XNE-BVMF➀ XNE-BVM➀ N XNE-BVMF➀ XNE-BVM➀ N XNE-BVMF➀ XNE-BVM➀ N XNE-BVMF➀ XNE-BVM➀ N NO XNE-BVMF➀ XNE-BVM➀ N NO XNE-BVMF➀ XNE-BVM➀ N NO XNE-BVMF➀ XNE-BVM➀ N XNE-BVMF➀ XNE-BVM➀ Specify a color code in place of ➀ in the Part No. Only solid wires can be used on the IP fingersafe terminal switches. ➀Operator olor ode : ed H: Bright red Illuminated Pushlock Pull/Turn eset (Solder Terminal) Shape ømm Mushroom Illumination ED ated Voltage V A/D Only solid wires can be used on the IP fingersafe terminal switches. Illuminated Push-ON Pushlock Pull/Turn eset (Solder Terminal) Shape ømm Mushroom Illumination ated Voltage Part No. N Main NO Monitor ontact ontact IP Fingersafe Terminal w/terminal over N XNE-VQMF XNE-VQM N XNE-VQMF XNE-VQM N XNE-VQMF XNE-VQM N XNE-VQMF XNE-VQM N NO XNE-VQMF XNE-VQM N NO XNE-VQMF XNE-VQM N NO XNE-VQMF XNE-VQM N XNE-VQMF XNE-VQM N Main ontact NO Monitor ontact Part No. IP Fingersafe w/terminal over Terminal N XNE-TVQMF XNE-TVQM Operator olor ed only Operator olor ED V A/D N XNE-TVQMF XNE-TVQM ed only N NO XNE-TVQMF XNE-TVQM Push-ON is illuminated when the operator is latched, and turns off when reset. Only solid wires can be used on the IP fingersafe terminal switches.

8 ø XN Series Emergency Stop Switches Flush Bezel Non-illuminated Pushlock Pull/Turn eset (Solder Terminal) Shape N Main ontact NO Monitor ontact IP Fingersafe Terminal Part No. w/terminal over ømm Mushroom N XNE-BVMF➀ XNE-BVM➀ N XNE-BVMF➀ XNE-BVM➀ N XNE-BVMF➀ XNE-BVM➀ N XNE-BVMF➀ XNE-BVM➀ N NO XNE-BVMF➀ XNE-BVM➀ N NO XNE-BVMF➀ XNE-BVM➀ N NO XNE-BVMF➀ XNE-BVM➀ N XNE-BVMF➀ XNE-BVM➀ Specify a color code in place of ➀ in the Part No. Only solid wires can be used on the IP fingersafe terminal switches. Operator olor ode : ed H: Bright red Illuminated Pushlock Pull/Turn eset (Solder Terminal) Shape ømm Mushroom Illumination ED ated Voltage V A/D Only solid wires can be used on the IP fingersafe terminal switches. Illuminated Push-ON Pushlock Pull/Turn eset (Solder Terminal) Shape ømm Mushroom Illumination ated Voltage Part No. N Main NO Monitor ontact ontact IP Fingersafe w/terminal over Terminal N XNE-VQMF XNE-VQM N XNE-VQMF XNE-VQM N XNE-VQMF XNE-VQM N XNE-VQMF XNE-VQM N NO XNE-VQMF XNE-VQM N NO XNE-VQMF XNE-VQM N NO XNE-VQMF XNE-VQM N XNE-VQMF XNE-VQM N Main ontact NO Monitor ontact Part No. IP Fingersafe w/terminal over Terminal N XNE-TVQMF XNE-TVQM Operator olor ed only Operator olor ED V A/D N XNE-TVQMF XNE-TVQM ed only N NO XNE-TVQMF XNE-TVQM Push-ON is illuminated when the operator is latched, and turns off when reset. Only solid wires can be used on the IP fingersafe terminal switches.

9 XN XN Series Emergency Stop Switches ø Padlockable Non-illuminated Pushlock Pull/Turn eset (Padlockable) Shape N Main ontact NO Monitor ontact IP Fingersafe Terminal Part No. w/terminal over ømm Mushroom N XNE-BMFH XNE-BMH N XNE-BMFH XNE-BMH N XNE-BMFH XNE-BMH N XNE-BMFH XNE-BMH N NO XNE-BMFH XNE-BMH N NO XNE-BMFH XNE-BMH N NO XNE-BMFH XNE-BMH N XNE-BMFH XNE-BMH Operator olor Bright red only Only solid wires can be used on the IP fingersafe terminal switches. Padlocks and hasps are not supplied with the emergency stop switches and must be ordered separately. See page. Illuminated Pushlock Pull/Turn eset (Padlockable) Shape Illumination ated Voltage N Main ontact NO Monitor ontact IP Fingersafe Terminal Part No. w/terminal over Operator olor ømm Mushroom N XNE-QMF XNE-QM N XNE-QMF XNE-QM N XNE-QMF XNE-QM ED V A/D N XNE-QMF XNE-QM N NO XNE-QMF XNE-QM ed only N NO XNE-QMF XNE-QM N NO XNE-QMF XNE-QM N XNE-QMF XNE-QM Only solid wires can be used on the IP fingersafe terminal switches. Padlocks and hasps are not supplied with the emergency stop switches and must be ordered separately. See page. ED Push-ON Pushlock Pull/Turn eset (Padlockable) Shape Illumination ated Voltage N Main ontact NO Monitor ontact IP Fingersafe Terminal Part No. w/terminal over Operator olor ømm Mushroom N XNE-TQMF XNE-TQM ED V A/D N XNE-TQMF XNE-TQM ed only N NO XNE-TQMF XNE-TQM Push-ON is illuminated when the operator is latched, and turns off when reset. Only solid wires can be used on the IP fingersafe terminal switches. Padlocks and hasps are not supplied with the emergency stop switches and must be ordered separately. See page.

10 ø XN Series Emergency Stop Switches Dimensions Plastic Bezel Non-illuminated IP Fingersafe...max. ø w/terminal over... max. ø ocking ing M Terminal s ubber Gasket ø Panel ut-out. ocking ing M Terminal s ubber Gasket Panel ut-out ø IP over XWZ-VMF Panel Thickness to ø ø mm Mushroom Terminal over XWZ-VM Panel Thickness to ø ø mm Mushroom Illuminated/Push-ON IP Fingersafe ø mm Jumbo Mushroom. max. ø w/terminal over ø mm Jumbo Mushroom. max. ø Illuminated Push-ON Panel ut-out. ocking ing M Terminal s ubber Gasket ø Illuminated Push-ON. +. Panel ut-out ocking ing M Terminal s ubber Gasket ø IP over XWZ-VMF Panel Thickness to Terminal over XWZ-VM Panel Thickness to Flush Bezel Non-Illuminated IP Fingersafe.. ø.max. ø w/terminal over.. ø. max. ø M Terminal s. ocking ing ubber Gasket ø Panel ut-out. ocking ing M Terminal s ubber Gasket ø Panel ut-out Illuminated/Push-ON IP Fingersafe IP over XWZ-VMF Panel Thickness to. max.. +. w/terminal over Terminal over XWZ-VM Panel Thickness to. max ø ø. +. Illuminated Push-ON. ocking ing M Terminal s ubber Gasket ø.. ø ø Illuminated Push-ON. ocking ing M Terminal s ubber Gasket ø Panel ut-out. +. Panel ut-out IP over XWZ-VMF Panel Thickness to Terminal over XWZ-VM Panel Thickness to All dimensions in mm.

11 XN XN Series Emergency Stop Switches ø Dimensions Padlockable Non-illuminated. max max.. +. IP Fingersafe.. ø w/terminal over.. ø Panel ut-out. Panel ut-out ocking ing M Terminal s ubber Gasket ø ocking ing M Terminal s ubber Gasket ø Illuminated/Push-ON IP over XWZ-VMF Panel Thickness to. +. Terminal over XWZ-VM Panel Thickness to. +. IP Fingersafe... max. ø w/terminal over... max. ø Illuminated Push-ON.. ocking ing M Terminal s ubber Gasket Panel ut-out ø Illuminated Push-ON.. ocking ing M Terminal s ubber Gasket Panel ut-out ø IP over XWZ-VMF Panel Thickness to Terminal over XWZ-VM Panel Thickness to Mounting Hole ayout Y ø. +. X Plastic Bezel Flush Bezel Terminal Arrangement (Bottom View) Non-illuminated N main contacts (black) only TOP X Y mm minimum The values shown above are the minimum dimensions for mounting with other ø mm pushbuttons. For other switches & pilot lights of different sizes and styles, determine the values according to the dimensions, operation, and wiring convenience. For padlockable, determine the values accord ing to the size and number of padlocks and hasp. With NO monitor contact (blue) TOP With monitor contacts (blue) TOP ED Unit Internal ircuit X X Illuminated N main contacts (black) only TOP ED ED chip Protection Diode esistor With NO monitor contact (blue) TOP With monitor contacts (blue) TOP eft ight eft ight eft ight eft ED ight eft ED ight eft ED ight eft N: Terminals on right N: Terminals on right and left N: Terminals on right, left, and top Push-ON N main contacts (black) only TOP ED ight X X N: T erminals on right and left N: Terminals on right, left, and top eft TOP ED X X ight eft N: Terminals on top N: Terminals on right and left With NO monitor contact (blue) ight (Example: NO N contact) X ontact Applicable rimping Terminal : N main contact (black) ing Terminal Spade Terminal : NO monitor contact (blue) ontact Number ( ) Starting with the contact ø. min. of TOP side, in a counterclockwise direction. TOP.min. ø. max. rimping Terminal X N: Terminals on right N: Terminals on right and left N: Terminals on right, left, and top. to. Wire. max.. min. X Be sure to install an insulating tube on the crimping terminal. X N: Terminals on top N: Terminals on right and left. max.. max.. to. Only solid wire can be rimping Terminal used for IP. Insulation Tube Insulation Tube. to. Wire X Solid Wire ø. max. X All dimensions in mm.

12 ø XN Series Emergency Stop Switches Accessories and eplacement Parts Name & Shape Material Part No. Ordering No. Terminal over Package Quantity PPE XWZ-VM XWZ-VMPN emarks Black Used for screw terminals. Attached to IP protection cover units. IP Fingersafe Terminal over Polyamide XWZ-VMF XWZ-VMFPN Black Used to change terminal cover to IP fingersafe terminal. Only solid wires can be used. Once installed, IP terminal cover cannot be removed. ing Wrench Brass XNZ-T XNZ-T Used to tighten the locking ring when installing the XN emergency stop switch onto a panel. ø ing Wrench Used to tighten the locking ring when installing the XN emergency stop switch onto a panel. Steel Trivalent chromate plating TWST-T TWST-T... The XN series emergency stop switches are supplied with either terminal cover or IP fingersafe terminal cover. Padlocks and hasps are not supplied and must be ordered separately. Nameplates (for ø Emergency Stop Switches) Description & Shape egend Part No. (blank) HNAV- Package Quantity Polyamide Mounting panel thickness XNE- :. to. mm XN E- V:. to. mm Dimensions (mm) ø EMEGENY STOP HNAV- ø.. Plate color: Yellow (Munsell.Y / or equivalent), egend: Black Padlock and Hasp Padlocks and hasps of the following specifications can be used with padlockable emergency stop switches. Padlock Size A B D mm maximum mm minimum mm minimum mm minimum (Note) Note: When the padlock is installed from the side of the bezel, dimension D requires a minimum of mm. When the padlock is installed from the front of the button, dimension D requires a minimum of mm. Use only padlocks or hasps that satisfy the specifications shown on the left. The maximum total weight for padlocks and hasps is g. Make sure that the total weight does not exceed g, otherwise the XN emergency stop switch may be damaged. Make sure that locking and unlocking of the padlock and hasp do not interfere with other devices. Padlocks and hasps are available from the following manufacturers. Manufacturer PANDUIT OP. Master ock ompany U B A D Manufacturer Part No. PANDUIT OP. PS-HD PS-A Master ock

13 XN XN Series Emergency Stop Switches ø Operating Instructions emoving the ontact Block First unlock the operator button. Grab the yellow bayonet ring ➀ and pull back the bayonet ring until the latch pin clicks ➁, then turn the contact block counterclockwise and pull out ➂. Notes for removing the contact block. Do not attempt to remove the contact block while the oper ator is latched, otherwise the switch may be damaged.. When the contact block is removed, the monitor contact (NO contact) is closed.. While removing the contact block, do not use excessive force, otherwise the switch may be damaged.. An ED lamp is built into the contact block for illuminated pushbuttons. When removing the contact block, pull the contact block straight to prevent damage to the ED lamp. If excessive force is used, the ED lamp may be damaged and fail to light. Panel Mounting emove the locking ring from the operator and check that the rubber gasket is in place. Insert the operator from panel front into the panel hole. Face the side without thread on the operator with TOP marking upward, and tighten the lock ing ring using ring wrench XNZ-T or TWST-T to a torque of. N m maximum. When using a nameplate When using a nameplate HNAV-, break the projection from the nameplate using pliers. Installing the ontact Block First unlock the operator button. Align the small marking on the edge of the operator with the small marking on the yellow bayonet ring. Hold the contact block, not the bayonet ring. Press the contact block onto the operator and turn the contact block clockwise until the bayo net ring clicks. Bayonet ing (yellow) ➂ Turn counterclockwise ➀ Grab ➁ Pull ubber Gasket Anti-rotation Projection Projection Marking Marking ➀ Push ➀ Grab atch Operator without thread TOP Marking ocking ing ➁ Turn clockwise TOP Marking Installing & emoving Terminal overs To remove the terminal cover, pull out the two latches on the top side of the terminal cover. Do not exert excessive force to the latches, otherwise the latches may break. IP Fingersafe Terminal over XWZ-VMF To install the IP fingersafe terminal cover, align the TOP marking on the cover with the TOP marking on the contact block, and press the cover toward the contact block. Notes:. Once installed, the XWZ-VMF cannot be removed.. With the XWZ-VMF installed, crimping terminals cannot be used. Use solid wires.. The XWZ-VMF cannot be installed after wiring.. Make sure that the XWZ-VMF is securely installed. IP cannot be achieved when installed loosely, and electric shocks may occur. Projections TOP Markings ➀ Place the projections on the contact block. TOP Marking (Pull) TOP Marking ➁ Press the terminal cove Slots Projections TOP Marking TOP Marking (Press) Notes for Operation When using the XN emergency stop switches in safety-related part of a control system, observe safety standards and regulations of the relevant country or region. Also be sure to perform a risk assessment before operation. Wiring Tighten the M terminal screws to a torque of. to. N m. ontact Bounce When the button is reset by pulling or turning, the N main contacts will bounce. When pressing the button, the NO monitor contacts will bounce. When designing a control circuit, take the contact bounce time into consideration (reference value: ms). ED Illuminated Switches An ED lamp is built into the contact block and cannot be replaced. Handling Do not expose the switch to excessive shocks and vibrations, for example by operating the switch with tools. Otherwise the switch may be deformed or damaged, causing malfunction or operation failure. Notes for installing the contact block. Do not attempt to install the contact block when the opera tor is latched, otherwise the switch may be damaged.. Make sure that the bayonet ring is in the locked position.

14 ø HN Series Emergency Stop Switches Emergency Stop Switches (Unibody) Specifications Standards Applicable Standards Mark File No. or Organization U SA. No. EN-- U isting File No. E TÜV SÜD EU ow Voltage Directive GB. No. ontact atings ated Insulation Voltage (Ui) V ated Thermal urrent (Ith) A ated Operational Voltage (Ue) V V V A esistive oad (A-) A A A / Hz Inductive oad (A-) A A A ated Operational urrent D esistive oad (D-) A A A Inductive oad (D-).A.A.A Note: The operational current represents the classification by making and breaking currents (IE --). Minimum applicable load (reference value): V A/D, ma (Applicable range may vary with operating condi tions and load types.) ED amp atings ated Operating Voltage of Unit ED amp Part No. ated Voltage ated urrent V A/D STD- V A/D ±% ma Incandescent amp atings Unit ated Operating Incandescent amp Voltage Part No. Wattage V A/D S- W (V) Specifications Operating Temperature Storage Temperature Operating Humidity Operating Force Minimum Force equired for Direct Opening Action Maximum Operator Stroke ontact esistance Insulation esistance Dielectric Strength Vibration esistance Shock esistance Operating Frequency ife Degree of Protection Terminal Style Weight (approx.) to + (no freezing) Illuminated units: to + to + to % H (no condensation) N. mm mm mω maximum (initial value) MΩ minimum (V D megger) Between live and dead metal parts ontacts:,v A, minute Illuminated parts:,v A, minute Damage limits: Hz, amplitude. mm Operating extremes: to Hz, amplitude. mm Damage limits:, m/s Operating extremes: m/s operations/h Mechanical:, operations minimum Electrical:, operations minimum IP M. screw g (HNE-BV) g (HNE-VQ) Pushlock Turn eset Switches (Unibody) Shape ontact Part No. Button olor HNE-BV ed only N HNE-BV When pressed, the button is held depressed. The button is released by turning clockwise. Terminal cover HW-V is supplied with the switch. Illuminated Pushlock Turn eset Switches (Unibody) Shape amp ontact Part No. ens olor HNE-VQ Without amp ed only N HNE-VQ When pressed, the button is held depressed. The button is released by turning clockwise. Terminal cover HW-V is supplied with the switch. Maintenance Parts Name Part No. Ordering No. Package Quantity Terminal over for HWE HW-V HW-VPN

15 HN HN Series Emergency Stop Switches ø Dimensions HNE-BV M. Terminal Gasket Panel Thickness. to Panel ut-out. max. ø Terminal Arrangement (Bottom View) TOP Marking Side ocking ing. ø. HNE-V M. Terminal Gasket Panel Thickness. to Terminal Arrangement (Bottom View) TOP Marking Side X M. Terminal amp Terminal ocking ing. ø AMP X. All dimensions in mm. Accessory ing Wrench Shape Material Part No. Metal (zincplated) Package Quantity TWST-T emarks Used for tightening the locking nut. Tighten the locking nut to a torque of. to. N m... ing Wrench. Used to tighten the locking ring when installing the XN emergency stop switch onto a panel. ø Brass XNZ-T Nameplates (for ø Emergency Stop Switches) Shape Part No. egend Package Quantity emarks HNAV- HNAV- (blank) EMEGENY STOP Background: Yellow egend: Black Applicable panel thickness:. to. mm Material: Polyamide egend EMEGENY STOP is indicated outside a ømm circle. ø ø..

16 ø Series Switches & Pilot ights Heavy duty switches & pilot lights offer both variety and reliability Endures harsh environments Degree of protection: IP U, SA approved, and EN compliant. Applicable Standards Mark File No. or Organization U U isting File No. E SA. No. EN-- SA File No. EU ow Voltage Directive GB. No. Specifications and atings ontact atings Pushbuttons Illuminated Pushbuttons Selector Switches Illuminated Selector Switches Selector Pushbuttons ontact Block ated Insulation Voltage ated ontinuous urrent ontact atings by Utilization ategory IE -- BS/BST (ø series) V A A- (A) D- (P) haracteristics ontact atings by Utilization ategory Operational Voltage V V V V V V Operational urrent A / Hz D A- ontrol of resistive loads and solid state loads A A A A A A- ontrol of electromagnetic loads (> VA) A A A A A D- ontrol of resistive loads and solid state loads A A.A.A D- ontrol of electromagnets A A.A.A Note: The operational current represents the classification by making and breaking currents (IE --). Minimum applicable load: V A/D, ma (applicable range may vary with operating conditions and load types) For mono-levers and cam switches, see pages and. BS (BST) ontact Block ontact Blocks Single-pole ontact Block M. Terminal Interlocking Groove ontact NO N EM (early make) B (late break) Part No. BS BSE BSE BSSE BSSE BST BST BST BSTS BSTS Push od Green ed Black White Inspection Window Push od Mounting BST contact blocks are used for the following switches and are not interchangeable with BS contact blocks. (The BS housing is dark gray and the BST housing is light gray.) Pushlock turn reset and push turn lock switches ED illuminated pushbuttons ED/incandescent illuminated selector switches All models of diecast zinc housing swiches & pilot lights Durable nylon housing has a high resistance against alkalis. Silver contacts. Gold contact (gold-plated silver) also available. Up to four blocks in two layers can be mounted onto each operator.

17 ø ED Illuminated Unit Specifications Pilot ight Illuminated Pushbutton Illuminated Selector Switch ø Series Switches & Pilot ights ø Unit olor ode ➁ Input Operating Voltage ED amp amp Base Part No. Voltage V A/D STD-➁ V A/D ±% V A/D BAS/ STD-➁ V A/D ±% Full Voltage V A/D STD-➁ V A/D ±% V A/D ETD-➁ V A/D ±% A: amber V A/D E/ ETD-➁ V A/D ±% PW: pure white V A/D ETD-➁ V A/D ±% : S: red blue BAS/ STD-➁ W: white Y: yellow Transformer V A/D ±% D-D onverter Note: Use a pure white (PW) ED for yellow (Y) illumination. Incandescent Illuminated Unit Specifications Pilot ight Illuminated Pushbutton Illuminated Selector Switch /V A V A /V A V A V A /V A (/ Hz) V D E/ ETD-➁ BAS/ STD-➁ E/ ETD-➁ V A/D ±% Unit olor ode ➁ Input Operating Voltage Incandescent amp amp Base Part No. ating V A/D S- W (.V) V A/D BAS/ S- W (V) Full Voltage V A/D S- W (V) V A/D E- W (.V) A: amber V A/D E/ E- W (V) O: orange V A/D E- W (V) : red S: blue W: white BAS/ S- W (.V) ED amp atings (STD) Transformer /V A V A /V A V A V A /V A V A (/ Hz) Part No. STD-➁ STD-➁ STD-➁ amp Base BAS/ ated Voltage V A/D V A/D V A/D Voltage ange V A/D ±% V A/D ±% V A/D ±% A ma ma ma urrent Draw A,, W: ma D ma ma G, PW, S:. ma olor ode ➁ A (amber), G (green), PW (pure white), (red), S (blue), W (white) amp Base olor Same as illumination color Voltage Marking Die stamped on the base ife (reference value) Approx., hours (The luminance is reduced to % the initial intensity when used on complete D.) E/ E- W (V) Internal ircuit X X ED hip Protection Diode Zener Diode esistor Note: Use a pure white (PW) ED for yellow (Y) illumination.

18 ø ø Series Switches & Pilot ights ED amp atings (ETD) Part No. ETD-➁ ETD-➁ ETD-➁ amp Base E/ ated Voltage V A/D V A/D V A/D Voltage ange V A/D ±% V A/D ±% V A/D ±% A,, W G, PW, S A, G, PW,, S, W A, G, PW,, S, W urrent Draw A ma ma ma ma D ma. ma. ma ma olor ode ➁ A (amber), G (green), PW (pure white), (red), S (blue), W (white) amp Base olor Same as illumination color Voltage Marking Die stamped on the base ife (reference value) Approx., hours (The luminance is reduced to % the initial intensity when used on complete D.) A,, W A,, W Internal ircuit G, PW, S ED hip Protection Diode Zener Diode esistor Note: Use a pure white (PW) ED for yellow (Y) illumination. Incandescent amp atings (S) Part No. S- S- S- S- amp Base BAS/ ated Voltage V A/D V A/D V A/D V A/D Wattage W (.V) W (V) W (V) W (V) Voltage Marking ife (reference value) Die stamped on the base Approx., hours minimum (mean value when used on the rated A voltage) Incandescent amp atings (E) Part No. E- E- E- E- amp Base E/ ated Voltage V A/D V A/D V A/D V A/D Wattage W (.V) W (V) W (V) W (V) Voltage Marking Die stamped on the base ife (reference value) Approx., hours minimum (mean value when used on the rated A voltage)

19 ø ø Series Switches & Pilot ights ø Specifications Operating Temperature Storage Temperature Operating Humidity ontact esistance Insulation esistance Dielectric Strength Vibration esistance Shock esistance Mechanical ife (minimum operations) to + (no freezing) to + (no freezing) to % H (no condensation) mω maximum (initial value) MΩ minimum (V D megger) Between live and dead metal parts: (Full voltage and pilot lights:,v A, minute,v A, minute) Operating extremes: to Hz, amplitude. mm Damage limits:, m/s Operating extremes: m/s Pushbuttons Momentary:,, :, Illuminated pushbuttons Momentary:,, :, Selector switches:, Key selector switches:, Illuminated selector switches:, Selector pushbuttons:, Mono-lever switches:, (Interlocking):, Pushlock turn reset, Mushroom push-pull switch Two contact blocks:, Four contact blocks:, Electrical ife (minimum operations) Pushbuttons:, Illuminated pushbuttons:, Selector switches:, Key selector switches:, Illuminated selector switches:, Selector pushbuttons:, Mono-lever switches:, (Interlocking):, Switching frequency, operations/h, duty ratio % Switching frequency, operations/h, duty ratio % Switching frequency operations/h, duty ratio % Switching frequency operations/h for square twin or twin maintained Degree of Protection Part No. Unit IE Pushbuttons, pilot lights, illuminated pushbuttons, selector switches, selector IP pushbuttons, mono-lever switches, and cam switches (ASNO/ASSO) A Illuminated selector switches, key pushbuttons, key reset pushbuttons, key cam IP switches, and key selector switches U Square pushbuttons, square pilot lights, and cam switches (U) IP Note: (S) of NEMA IS - applies to the pilot lights with round lens. Mounting Hole ayout ø. ound Unit: Square Unit: +.. max (Twin ). max. ø The minimum mounting centers are applicable to switches with one layer of contact blocks (two contact blocks). When two layers of contact blocks (four contact blocks) are mounted, determine the minimum mounting centers in consideration of convenience for wiring. Mushroom with shroud: mm minimum Jumbo mushroom: mm minimum Jumbo mushroom with shroud: mm minimum Square twin: mm minimum Selector switch with lever: mm minimum The. mm recess is for preventing rotation and is not necessary when the nameplate or anti-rotation ring is not used. Note: For mounting hole layout of pushbuttons, mono-lever switches, and cam switches, see each section.

20 ø ø Series Switches & Pilot ights (Ordering Information) Ordering Information Standard Units Specify an operator or lens color code in the Part No. Black, green, and red buttons are included with flush pushbuttons. Terminal covers, nameplates, and accessories are ordered separately. Terminal over When a terminal cover is required, order an applicable terminal cover referring to page. The Part No. development charts shown below can be used to specify switches and pilot lights other than those listed on the following pages. Gold-plated silver contacts are also available. ø Series Pushbuttons ABN - MAU Optional contact MAU: Gold-plated silver contact Button color code ontact configuration : NO : N : : : N : -N : NO : N : NO-N : NO-N : NO : N : NO-N : -N Note: Mushroom pull ATN can have a maximum of two contact blocks. Mushroom push-pull return ATN cannot have only NO or only N contacts. No other contact configurations are available for square twin UWQN than those specified in this catalog. ø Series Illuminated Pushbuttons AFN D N - MAU Optional contact MAU: Gold-plated silver contact ens color code ontact configuration : : : N : NO-N : -N : NO-N : NO : N Operating voltage code Note: Illuminated pushbuttons cannot have an odd number of contact blocks, such as NO, N, NO, -N, NO-N, and N. ø Series Pilot ights APN D ens color code Operating voltage code Note: ED lamps cannot be used on V A transformers.

21 ø ø Series Switches & Pilot ights (Ordering Information) ø ø Series Selector Switch ASN - MAU Optional contact MAU: Gold-plated silver contact ontact configuration Operator (blank): Knob : ever Operator position code ø Series Illuminated Selector Switch ASN D N - MAU Optional contact MAU: Gold-plated silver contact ens color code ontact configuration Operating voltage code Number of positions ø Series Key Selector Switch ASN K D - MAU Optional contact MAU: Gold-plated silver contact Key removable position code -position (blank): emovable in all positions B: emovable in left only : emovable in right only Spring return from right (blank): emovable in left only Spring return from left (blank): emovable in right only -position (blank): emovable in all positions B: emovable in left and center : emovable in right and center D: emovable in center only E: emovable in right and left G: emovable in left only H: emovable in right only Spring return from right (blank): emovable in left and center D: emovable in center only G: emovable in left only Spring return from left (blank): emovable in right and center D: emovable in center only H: emovable in right only Spring return two-way (blank): emovable in center only ontact configuration Operator position code Note: The key cannot be removed in the return position.

22 ø ø Series Pushbuttons Flush / Extended / Extended w/half Shroud / Extended w/full Shroud Pushbuttons Flush ABN Flush AON Extended ABN Extended AON Shape Operation ontact Part No. ➀ Button olor ode NO ABN➀ N ABN➀ (nameplate sold separately) (nameplate sold separately) (nameplate sold separately) (nameplate sold separately) Extended with Half Shroud ABNG (nameplate sold separately) Extended with Half Shroud AONG (nameplate sold separately) Extended with Full Shroud ABNF (nameplate sold separately) Extended with Full Shroud AONF (nameplate sold separately) Momentary Momentary Momentary Momentary M. Terminal ABN➀ ABN➀ Black (B), green (G), and red () N ABN➀ buttons are supplied with each -N ABN➀ unit. NO N AON➀ AON➀ AON➀ Specify S, W, or Y when a blue, white, or yellow button is required. M. Terminal AON➀ N AON➀ -N AON➀ NO ABN➀ M. Terminal N ABN➀ ABN➀ ABN➀ N ABN➀ -N ABN➀ NO AON➀ M. Terminal N AON➀ AON➀ AON➀ N AON➀ -N AON➀ NO ABNG➀ M. Terminal N ABNG➀ ABNG➀ Specify a button color code in place ABNG➀ of ➀ in the Part N ABNG➀ No. -N ABNG➀ B: black NO AONG➀ M. Terminal : red N AONG➀ S: blue W: white AONG➀ Y: yellow AONG➀ N AONG➀ -N AONG➀ NO ABNF➀ M. Terminal N ABNF➀ ABNF➀ ABNF➀ N ABNF➀ -N ABNF➀ NO AONF➀ M. Terminal N AONF➀ AONF➀ AONF➀ N AONF➀ -N AONF➀ ound bezel and shroud (metal): hrome-plated Other contact configurations and gold-plated silver contacts are also available. See page. Dimensions (mm) ( or blocks) ( or blocks) ( to blocks) ( to blocks) ( or blocks) ( or blocks) ( to blocks) ( to blocks) Package Quantity: Panel Thickness. to. ø ( or blocks). ( or blocks) ( or blocks) ( or blocks). ( or blocks) ( or blocks) ( or blocks) ( or blocks) Panel Thickness. to. ø Panel Thickness. to. ø ø. Panel Thickness. to. ø ø. ø ø ø Panel Thickness. to ø ø ø Panel Thickness. to ø ø. ø Panel Thickness. to. ø ø. ø Panel Thickness. to.

23 ø ø Series Pushbuttons ø Mushroom / Jumbo Mushroom / Square Flush / Square Extended Pushbuttons Mushroom ABN Mushroom AON Shape Operation ontact Part No. ➀ Button olor ode Mushroom with Full Shroud ABNG Palm Mushroom ABN Jumbo Mushroom with Shallow Shroud ABNG Jumbo Mushroom with Deep Shroud ABNF Square Flush UBQN Square Extended UBQN (nameplate sold separately) (nameplate sold separately) Momentary Momentary Momentary Momentary Momentary Momentary Momentary NO ABN➀ N ABN➀ ABN➀ ABN➀ N ABN➀ -N ABN➀ NO AON➀ M. Terminal N AON➀ B: black AON➀ : red AON➀ S: blue W: white N AON➀ Y: yellow -N AON➀ NO ABNG➀ M. Terminal N ABNG➀ ABNG➀ ABNG➀ N ABNG➀ -N ABNG➀ NO ABN➀ M. Terminal N ABN➀ ABN➀ ABN➀ N ABN➀ -N ABN➀ NO ABNG➀ M. Terminal N ABNG➀ ABNG➀ B: black ABNG➀ : red N ABNG➀ -N ABNG➀ NO ABNF➀ N ABNF➀ M. Terminal ABNF➀ ABNF➀ N ABNF➀ -N ABNF➀ NO UBQN➀ M. Terminal N UBQN➀ UBQN➀ UBQN➀ N UBQN➀ B: black -N UBQN➀ NO UBQN➀ : red M. Terminal Y: yellow N UBQN➀ UBQN➀ UBQN➀ N UBQN➀ -N UBQN➀ Specify a button color code in place of ➀ in the Part No. ound/square bezel and shroud (metal): hrome-plated Other contact configurations and gold-plated silver contacts are also available. See page. M. Terminal Dimensions (mm) ( or blocks) ( or blocks) Package Quantity: Panel Thickness. to. ø Panel Thickness. to. ø ( or blocks) ( or blocks) ( or blocks) ( or blocks) ( or blocks) Panel Thickness. to. ( or blocks) ( or blocks) ( or blocks) ( or blocks). ( or blocks). ( or blocks). ( or blocks). ( or blocks). ( or blocks) ø Panel Thickness. to. ø Panel Thickness. to. ø ø Panel Thickness. to. ø Panel Thickness. to. Panel Thickness. to...

24 K ø ø Series Pushbuttons Pushlock Turn eset / Pushlock Key eset / Push Turn ock / Key ON/OFF ock / Toggle ever Pushbuttons Shape ontact Part No. ➀ Button olor ode Mushroom Pushlock Turn eset NO AVNN➀ AVN N AVNN➀ AVNN➀ : red AVNN➀ Y: yellow N AVNN➀ -N AVNN➀ Mushroom Pushlock Key eset NO ABNK➀ ABNK N ABNK➀ B: black ABNK➀ ABNK➀ : red Y: yellow N ABNK➀ (nameplate sold separately) -N ABNK➀ Jumbo Mushtoon Pushlock Key NO ABNK➀ eset ABNK N ABNK➀ ABNK➀ B: black ABNK➀ : red N ABNK➀ -N ABNK➀ Pushlock Push Turn ock NO AJNN➀ AJN N AJNN➀ B: black AJNN➀ AJNN➀ : red Y: yellow N AJNN➀ -N AJNN➀ Key ON/OFF ock ABN NO ABN N ABN Toggle ever ATN (nameplate sold separately) (nameplate sold separately) N -N NO N N -N ABN ABN ABN ABN ATN ATN ATN ATN ATN ATN ever: black M. Terminal. ( or blocks) ( or blocks) M. Terminal Dimensions (mm) Panel Thickness. to. ø Panel Thickness. to. ø ( or blocks) ( or blocks). M. Terminal ( or blocks) ( or blocks) M. Terminal. ( or blocks) ( or blocks) M. Terminal ( or blocks) ( or blocks) M. Terminal Panel Thickness. to.. ø ø Panel Thickness. to. Package Quantity: PUSH FEE O OK Panel Thickness. to.. ( or blocks) ( or blocks) ø ø Panel Thickness. to. Specify a button color code in place of ➀ in the Part No. ound bezel (metal): hrome-plated ylinder (metal): hrome-plated Other contact configurations and gold-plated silver contacts are also available. See page. Pushlock Turn eset: Button is maintained when pressed and is reset when turned clockwise. ed buttons only. Note: ø pushlock turn reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use XN or HN series emergency stop switches (ISO and IE -- compliant). Pushlock Key eset: Button is maintained when pressed and is reset with a key. Key is removable from both depressed and reset positions. Two keys are supplied. Note: ø pushlock key reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use HW series emergency stop switches with a HWZ-A ring adapter (ISO and IE -- compliant). Push Turn ock: Button is locked when turned clockwise in the depressed position and is reset when turned counterclockwise. Key ON/OFF ock: Button can be locked in both depressed and reset positions. Toggle ever: ON and OFF are indicated on the cap. ø FEE

25 ø ø Series Pushbuttons ø Pull / Push-Pull / Pin ock Pushbuttons Shape ontact Part No. ➀ Button olor ode Mushroom Pull ATN NO ATN➀ ATN➀ (nameplate sold separately) Mushroom Push-Pull ATN (nameplate sold separately) Mushroom Push-Pull eturn ATN N N -N ATN➀ ATN➀ ATN➀ ATN➀ ATN➀ ATN➀ ATN➀ B: black : red Y: yellow M. Terminal. Dimensions (mm) stroke ( or blocks). M. Terminal M. Terminal stroke ( or blocks) ( or blocks). ø Package Quantity: Panel Thickness. to. ø Panel Thickness. to. Panel Thickness. to.. ø Pin ock ABNP (nameplate sold separately) (nameplate sold separately) Pin ock (ON ock) ABNP -TK- -N NO N N -N NO N N -N ATN➀ ABNP ABNP ABNP ABNP ABNP ABNP ABNP-TK- ABNP-TK- ABNP-TK- ABNP-TK- ABNP-TK- ABNP-TK- ( or blocks), ( or blocks) Panel Thickness. to. M. Terminal. ( or blocks) ( or blocks) Panel Thickness. to. M. Terminal ( or blocks) ( or blocks) Specify a button color code in place of ➀ in the Part No. ound bezel and shroud (metal): hrome-plated Square bezel (metal): hrome-plated Other contact configurations and gold-plated silver contacts are also available. See page. Pull: Pulling the button operates the contacts, and releasing the button return the contacts. Suitable to prevent unintended operation when an object touches the pushbutton. Up to contact blocks ( layer) can be mounted on pull switches. Push-Pull: -position pushbutton. Pushing or pulling operates the contacts. Button is maintained in both depressed and reset positions. Note: ø push pull switches cannot be used as emergency stop switches. When emergency stop switches are required, use XN series emergency stop switches (ISO and IE -- compliant). Push-Pull eturn: -position pushbutton. Pushing or pulling the button operates the contacts. Button is spring-returned to the center position. Pin ock: Button can be locked in either depressed or reset position by inserting the pin. Pad lock with a ømm pin can also be used to lock the button. Pin ock (ON ock): Button is locked in the depressed position by inserting the pin. Button cannot be locked in the reset position. stroke... ø ø ø ø stroke ontact Operation Pull Switch ATN ontact Normal Pull NO N N Push-Pull Switch ATN ontact Push Pull N -N Push-Pull eturn Switch ATN ontact Push Normal Pull -N

26 ø ø Series Pushbuttons Square Twin / Twin Pushbuttons Shape ontact Part No. Button olor Dimensions (mm) Square Twin (Momentary) UWQN ON OFF Package Quantity: NO NO UWQN M. Terminal Panel Thickness. to (nameplate sold separately) NO N UWQN N UWQN ON: Black OFF: ed ( or blocks) ( or blocks). O N OFF Square Twin () UWQN ON OFF NO UWQN M. Terminal Panel Thickness. to N UWQN UWQN UWQN ON: Black OFF: ed ( block) ( blocks). O N OFF (nameplate sold separately) N UWQN Flush Twin ABBN Top Bottom NO ABBN M. Terminal N ABBN ABBN ABBN Black (B), green (G), and red () buttons are sup plied with each unit. ø (nameplate sold separately) N ABBN -N ABBN Panel Thickness. to. Mushroom Twin (Without buttons) ABBN Top Bottom NO ABBN M. Terminal N ABBN ABBN ABBN ø (nameplate sold separately) N ABBN -N ABBN Panel Thickness. to. ound bezel (metal): hrome-plated Other contact configurations and gold-plated silver contacts are also available. See page. Square Twin (Momentary): Two independent momentary switches are contained in one unit, each operated by ON or OFF button. With the ø adapter removed from the sleeve, the unit can mount in a ø.mm mounting hole for the ø series. Square Twin (): The contact operates when ON button is pressed and is maintained in the depressed position. The button is reset by pressing the OFF button. Twin : The contact operates when the top button is pressed and is maintained in the depressed position. The button is reset by pressing the bottom button. Different combinations of flush, extended HWZ-A buttons, and colors are available (ABNB-, ABNB- ). See page. Mushroom buttons for the ABBN are ordered separately. Specify the color code (ABNB- ). See page.

27 ø ø Series Pilot ights ø Dome Pilot ights Package Quantity: Shape amp amp eceptacle Part No. ➁ ens/ed olor ode Applicable amp Dome APN APNE Without amp BAS E APN➁ APNE➁ : clear DNA: amber DNY: yellow O: orange : red S: blue W: white ED BAS E APN➂DN➁ APNE➂DN➁ A: amber PW: pure white : red S: blue W: white Y: yellow A: amber : red S: blue W: white Y: yellow See pages and for lamps. Incandescent BAS APN➂➁ : clear O: orange : red E APN➂➁ S: blue W: white Operating Voltage ode Specify an operating voltage code in place of ➂ in the Part No. ➂ Operating Voltage ode ED Incandescent (BAS) Incandescent (E) : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A : /V A : V A : /V A : V A : V A : /V A : V A Input Full Voltage Transformer D: V D D-D onverter * Specify a lens/ed color code in place of ➁ in the Part No. Use a pure white (PW) ED for yellow (Y) illumination. D-D converter types are not approved by U and SA, and not E compliant (operating voltage to V D). Dimensions Full Voltage M Terminal Panel Thickness. to. ø.. Transformer D-D onverter M. Terminal Panel Thickness. to. ø.. All dimensions in mm.

28 ø ø Series Pilot ights Square / ectangular (Marking) Pilot ights Package Quantity: Shape amp amp eceptacle Part No. ➁ ens/ed olor ode Applicable amp Square UPQNB ectangular (Marking) UPQN ectangular (Marking) UPQNE UPQN Without amp BAS UPQNB➁ ED BAS UPQNB➂D➁ Incandescent BAS UPQNB➂➁ Without amp BAS UPQN➁ ED BAS UPQN➂D➁ Incandescent BAS UPQN➂➁ Without amp E UPQNE➁ ED E UPQNE➂D➁ Incandescent E UPQN➂➁ (Note) DA: amber DY: yellow : clear O: orange : red S: blue W: white A: amber : red S: blue W: white Y: yellow : clear O: orange : red S: blue W: white DA: amber DY: yellow O: orange : red S: blue W: white A: amber : red S: blue W: white Y: yellow O: orange : red S: blue W: white DA: amber DY: yellow O: orange : red S: blue W: white A: amber : red S: blue W: white Y: yellow O: orange : red S: blue W: white See pages to for lamps. Operating Voltage ode Specify an operating voltage code in place of ➂ in the Part No. ➂ Operating Voltage ode ED Incandescent (BAS) Incandescent (E) Input Type : V A/D : V A/D : V A/D : V A/D : V A/D : V A/D : V A/D Full Voltage : V A/D : V A/D (Note) When ordering V, V, V A/D units, specify "E " before the operating voltage code. UPQNE➂➁. : /V A : V A : /V A : V A : /V A : V A : /V A : V A : /V A : V A : /V A : V A Transformer : V A : /V A : V A : /V A : V A : V A : /V A : V A D: V D D-D onverter * Specify a lens/ed color code in place of ➁ in the Part No. Use a pure white (PW) ED for yellow (Y) illumination. On the rectangular marking pilot light, a clear lens and a color marking plate are used for white illumination. Marking plate: mm, mm thick D-D converter types are not approved by U and SA, and not E compliant (operating voltage to V D).

29 ø ø Series Pilot ights ø Dimensions Square Full Voltage UPQNB ectangular Full Voltage UPQN ectangular Full Voltage UPQNE M Terminal Panel Thickness. to. M Terminal Panel Thickness. to. Panel Thickness. to. M Terminal Square Transformer Square D-D onverter UPQNB ectangular Transformer ectangular D-D onverter UPQN ectangular Transformer ectangular D-D onverter UPQNE M. Terminal Panel Thickness. to. M. Terminal Panel Thickness. to. M. Terminal Panel Thickness. to All dimensions in mm. eflector. The lamp housing of the square ED illuminated pilot lights has a built-in reflector.. Make sure that the reflector does not fall off when removing the lens or marking plate.. When replacing the ED lamp of UPQNE (rectangular), use a lamp holder tool (O-).. To remove the reflector, insert a flat screwdriver inside the groove of the reflector and lightly push out. Groove Panel Mounting. Tighten the square ring to the operator and position the ring correctly.. ightly tighten the screw to secure the pilot light onto the panel. Tighten the screw lightly so that the panel does not bend. ecommended tightening torque:. N m

30 ø ø Series Pilot ights Incandescent Push-to-heck Pilot ights (W) Package Quantity: Push-to-heck APN P Shape amp amp eceptacle Part No. ➁ ens/ed olor ode Applicable amp Without amp BAS APNP➁ Incandescent BAS APN➂P➁ : clear O: orange : red S: blue W: white See pages to for lamps. Operating Voltage ode Specify an operating voltage code in place of ➂ in the Part No. ➂ Operating Voltage ode Input : V A/D : V A/D Full voltage : V A/D : /V A : V A : /V A : V A Transformer : V A : /V A : V A ircuit Example STAT STOP M M OS Note: The lamp of the push-to-check pilot light is not connected to the contact terminal. To connect, refer to the diagram on the left. Push-to-heck Pilot ight Dimensions Push-to-heck APN P M amp Terminal M. Terminal M. Terminal Panel Thickness. to. ø A:. B:.. A: Full voltage B: Transformer All dimensions in mm.

31 ø ø Series Illuminated Pushbuttons ø ED Shape ound Extended AN AON ANE AONE ound Extended Illuminated Pushbuttons amp eceptacle BAS E Package Quantity: Operation amp ontact Part No. Applicable amp Momentary Momentary Without amp ED Without amp ED Without amp ED Without amp ED N N N N N N N N ANDN➁ ANDN➁ ANDN➁ AN➂DN➁ AN➂DN➁ AN➂DN➁ AONDN➁ AONDN➁ AONDN➁ AON➂DN➁ AON➂DN➁ AON➂DN➁ ANEDN➁ ANEDN➁ ANEDN➁ ANE➂DN➁ ANE➂DN➁ ANE➂DN➁ AONEDN➁ AONEDN➁ AONEDN➁ AONE➂DN➁ AONE➂DN➁ AONE➂DN➁ See pages to for lamps. olor ode and Operating Voltage ode ➁ ens/ed olor ode ➂ Operating Voltage ode Input Specify a lens/ed color code in place of ➁. A: amber PW: pure white : red S: blue W: white Y: yellow Use a pure white (PW) ED for yellow (Y) illumination. : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A Full voltage Transformer Dimensions AN/AON BAS/Full Voltage M Terminal M. Terminal Panel Thickness. to. AN/AON BAS/Transformer M. Terminal s Panel Thickness. to. ø ø ø ø ø ø. ( blocks) ( blocks).. ( blocks). ( blocks). ANE/AONE E/Full Voltage M Terminal M. Terminal Panel Thickness. to. ANE/AONE E/Transformer M. Terminal s Panel Thickness. to. ø ø ø ø ø ø.. ( blocks). ( blocks) ( blocks) ( blocks) All dimensions in mm.

32 ø ø Series Illuminated Pushbuttons Incandescent ound Extended Illuminated Pushbuttons Package Quantity: Shape amp eceptacle Operation amp ontact Part No. Applicable amp ound Extended AN ANE AON AONE BAS E Momentary Momentary Without amp Incandescent Without amp Incandescent Without amp Incandescent Without amp Incandescent N N N N N N N N AN➁ AN➁ AN➁ AN➂➁ AN➂➁ AN➂➁ AON➁ AON➁ AON➁ AON➂➁ AON➂➁ AON➂➁ ANE➁ ANE➁ ANE➁ AN➂➁ AN➂➁ AN➂➁ AONE➁ AONE➁ AONE➁ AON➂➁ AON➂➁ AON➂➁ See pages to for lamps. olor ode and Operating Voltage ode Specify a code in place of ➁ or ➂ in the Part No. ➁ ens olor ode Specify a lens color code in place of ➁. : clear O: orange : red S: blue W: white ➂ Operating Voltage ode Incandescent (BAS) Incandescent (E) : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A E: V A/D E: V A/D E: V A/D : /V A : V A : /V A : V A : V A : /V A : V A Full voltage Input Transformer Dimensions AN Momentary BAS/Full Voltage M Terminal M. Terminal Panel Thickness. to. AN Momentary BAS/Transformer M. Terminal s Panel Thickness. to. AON BAS/Full Voltage M Terminal M. Terminal Panel Thickness. to. AON BAS/Transformer M. Terminal s Panel Thickness. to.. ( blocks).. ( blocks) M Terminal M. Terminal Panel Thickness. to. M. Terminal s Panel Thickness. to. M Terminal M. Terminal Panel Thickness. to. M. Terminal s Panel Thickness. to. ø. ø ø. ø ø. ø ø. ø ø. ø ø. ø ø. ø ø. ø. ( blocks). ( blocks).. ( blocks).. ( blocks). ( blocks). ( blocks). ANE Momentary E/Full Voltage ANE Momentary E/Transformer AONE E/Full Voltage AONE E/Transformer. ( blocks).. ( blocks). ( blocks). ( blocks).. ( blocks).. ( blocks). ( blocks). ( blocks).

33 ø ø Series Illuminated Pushbuttons ø ED ound Extended with Half Shroud Illuminated Pushbuttons Package Quantity: Shape amp eceptacle Operation amp ontact Part No. Applicable amp ound Extended AGN AOGN AGNE AOGNE BAS E Momentary Momentary Without amp ED Without amp ED Without amp ED Without amp ED N N N N N N N N AGNDN➁ AGNDN➁ AGNDN➁ AGN➂DN➁ AGN➂DN➁ AGN➂DN➁ AOGNDN➁ AOGNDN➁ AOGNDN➁ AOGN➂DN➁ AOGN➂DN➁ AOGN➂DN➁ AGNEDN➁ AGNEDN➁ AGNEDN➁ AGNE➂DN➁ AGNE➂DN➁ AGNE➂DN➁ AOGNEDN➁ AOGNEDN➁ AOGNEDN➁ AOGNE➂DN➁ AOGNE➂DN➁ AOGNE➂DN➁ See pages to for lamps. olor ode and Operating Voltage ode Specify a code in place of ➁ or ➂ in the Part No. ➁ ens/ed olor ode ➂ Operating Voltage ode Input Specify a lens/ed color code in place of ➁. : V A/D : V A/D Full voltage A: amber : V A/D PW: pure white : red S: blue W: white Y: yellow Transformer Use a pure white (PW) ED for yellow (Y) illumination. : /V A : V A : /V A : V A : V A : /V A Dimensions AGN/AOGN BAS/Full Voltage M. Terminal M Terminal Panel Thickness. to. AGN/AOGN BAS/Transformer M. Terminal s Panel Thickness. to. ø ø ø ø ø ø ø ø AGNE/AOGNE E/Full Voltage M Terminal.. ( blocks).. ( blocks) M. Terminal Panel Thickness. to. ( blocks) ( blocks) AGNE/AOGNE E/Transformer M. Terminal s. Panel Thickness. to. ø ø ø ø ø ø ø ø. ( blocks). ( blocks). ( blocks). ( blocks). All dimensions in mm.

34 ø ø Series Illuminated Pushbuttons Incandescent ound Extended with Half Shroud Illuminated Pushbuttons Package Quantity: Shape amp eceptacle Operation amp ontact Part No. Applicable amp ound Extended AN G ANE G BAS E Momentary Momentary Without amp Incandescent Without amp Incandescent N N N N ANG➁ ANG➁ ANG➁ AN➂➁ AN➂➁ AN➂➁ ANEG➁ ANEG➁ ANEG➁ AN➂➁ AN➂➁ AN➂➁ See pages to for lamps. olor ode and Operating Voltage ode Specify a code in place of ➁ or ➂ in the Part No. ➁ ens olor ode ➂ Operating Voltage ode Incandescent (BAS) Incandescent (E) Specify a lens color code in place of ➁. G: V A/D EG: V A/D G: V A/D EG: V A/D G: V A/D EG: V A/D : clear O: orange : red S: blue W: white G: /V A G: V A G: /V A G: V A G: V A G: /V A G: V A G: /V A G: V A G: /V A G: V A G: V A G: /V A G: V A Full voltage Input Transformer Dimensions AN G Momentary BAS/Full Voltage M Terminal M. Terminal Panel Thickness. to AN G Momentary BAS/Transformer M. Terminal s Panel Thickness. to ø. ø ø ø. ø ø ( blocks) ( blocks) ( blocks) ( blocks) ANE G Momentary E/Full Voltage M. Terminal M Terminal Panel Thickness. to ANE G Momentary E/Transformer M. Terminal s Panel Thickness. to ø. ø ø ø. ø ø ( blocks) ( blocks) ( blocks) ( blocks) All dimensions in mm.

35 ø ø Series Illuminated Pushbuttons ø ED ound Extended with Full Shroud Illuminated Pushbuttons Package Quantity: Shape amp eceptacle Operation amp ontact Part No. Applicable amp ound Extended AFN AOFN AFNE AOFNE BAS E Momentary Momentary Without amp ED Without amp ED Without amp ED Without amp ED N N N N N N N N AFNDN➁ AFNDN➁ AFNDN➁ AFN➂DN➁ AFN➂DN➁ AFN➂DN➁ AOFNDN➁ AOFNDN➁ AOFNDN➁ AOFN➂DN➁ AOFN➂DN➁ AOFN➂DN➁ AFNEDN➁ AFNEDN➁ AFNEDN➁ AFNE➂DN➁ AFNE➂DN➁ AFNE➂DN➁ AOFNEDN➁ AOFNEDN➁ AOFNEDN➁ AOFNE➂DN➁ AOFNE➂DN➁ AOFNE➂DN➁ See pages to for lamps. olor ode and Operating Voltage ode Specify a code in place of ➁ or ➂ in the Part No. ➁ ens/ed olor ode ED Specify a lens/ed color code in place of ➁. A: amber PW: pure white : red S: blue W: white Y: yellow Use a pure white (PW) ED for yellow (Y) illumination. Dimensions AFN/AOFN BAS/Full Voltage M Terminal M. Terminal Panel Thickness. to. ➂ Operating Voltage ode : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A AFN/AOFN BAS/Transformer M. Terminal s Input Full voltage Transformer Panel Thickness. to. ø. ø ø ø. ø ø.. ( blocks). ( blocks) ( blocks) ( blocks) AFNE/AOFNE E/Full Voltage M. Terminal M Terminal Panel Thickness. to AFNE/AOFNE E/Transformer M. Terminal s Panel Thickness. to ø. ø ø ø. ø ø. ( blocks). ( blocks) ( blocks) ( blocks) All dimensions in mm.

36 ø ø Series Illuminated Pushbuttons Incandescent ound Extended with Full Shroud Illuminated Pushbuttons Package Quantity: Shape amp eceptacle Operation amp ontact Part No. Applicable amp ound Extended AN F ANE F AON F AONE F BAS E olor ode and Operating Voltage ode Specify a code in place of ➁ or ➂ in the Part No. ➁ ens olor ode Specify a lens color code in place of ➁. : clear O: orange : red S: blue W: white Momentary Momentary Without amp Incandescent Without amp Incandescent Without amp Incandescent Without amp Incandescent N N N N N N N N ➂ Operating Voltage ode Incandescent (BAS) Incandescent (E) F: V A/D F: V A/D F: V A/D F: /V A F: V A F: /V A F: V A F: V A F: /V A F: V A EF: V A/D EF: V A/D EF: V A/D F: /V A F: V A F: /V A F: V A F: V A F: /V A F: V A ANF➁ ANF➁ ANF➁ AN➂➁ AN➂➁ AN➂➁ AONF➁ AONF➁ AONF➁ AON➂➁ AON➂➁ AON➂➁ ANEF➁ ANEF➁ ANEF➁ AN➂➁ AN➂➁ AN➂➁ AONEF➁ AONEF➁ AONEF➁ AON➂➁ AON➁➁ AON➂➁ Input Full voltage Transformer See pages to for lamps. Dimensions AN F Momentary BAS/Full Voltage M. Terminal M Terminal Panel Thickness. to ø. ø AN F Momentary BAS/Transformer M. Terminal s Panel Thickness. to AON F BAS/Full Voltage M Terminal M. Terminal Panel Thickness. to ø. ø AON F BAS/Transformer M. Terminal s All dimensions in mm. Panel Thickness. to ø. ø ( blocks) ( blocks) ANE F Momentary E/Full Voltage M Terminal M. Terminal Panel Thickness. to ( blocks) ( blocks) AN F Momentary E/Transformer M. Terminal s Panel Thickness. to ( blocks) ( blocks) M Terminal M. Terminal Panel Thickness. to ( blocks) ( blocks) AON F E/Transformer M. Terminal s Panel Thickness. to ø. ø ø. ø ø. ø ø. ø AONE F E/Full Voltage ø. ø ( blocks) ( blocks) ( blocks) ( blocks) ( blocks) ( blocks) ( blocks) ( blocks)

37 ø ø Series Illuminated Pushbuttons ø ED Mushroom (ø) Illuminated Pushbuttons Package Quantity: Shape amp eceptacle Operation amp ontact Part No. Applicable amp ø Mushroom AN AON ANE AONE BAS E Momentary Momentary Without amp ED Without amp ED Without amp ED Without amp ED N N N N N N N N ANDN➁ ANDN➁ ANDN➁ AN➂DN➁ AN➂DN➁ AN➂DN➁ AONDN➁ AONDN➁ AONDN➁ AON➂DN➁ AON➂DN➁ AON➂DN➁ ANEDN➁ ANEDN➁ ANEDN➁ ANE➂DN➁ ANE➂DN➁ ANE➂DN➁ AONEDN➁ AONEDN➁ AONEDN➁ AONE➂DN➁ AONE➂DN➁ AONE➂DN➁ See pages to for lamps. olor ode and Operating Voltage ode Specify a code in place of ➁ or ➂ in the Part No. ➁ ens/ed olor ode ➂ Operating Voltage ode Input Specify a lens/ed color code in place of ➁. : V A/D : V A/D Full voltage A: amber : V A/D : red S: blue W: white Y: yellow Transformer Use a pure white (PW) ED for yellow (Y) illumination. : /V A : V A : /V A : V A : V A : /V A Dimensions AN/AON BAS/Full Voltage M Terminal M. Terminal Panel Thickness. to. AN/AON BAS/Transformer M. Terminal s Panel Thickness. to. ø ø. ( blocks). ( blocks). ( blocks). ( blocks). ANE/AONE E/Full Voltage M Terminal M. Terminal Panel Thickness. to. ANE/AONE E/Transformer M. Terminal s Panel Thickness. to. ø ø.. ( blocks). ( blocks) ( blocks) ( blocks) All dimensions in mm.

38 ø ø Series Illuminated Pushbuttons Incandescent Square and ectangular Extended Illuminated Pushbuttons Package Quantity: Shape amp eceptacle Operation amp ontact Part No. Applicable amp Square Extended UQN UOQN ectangular (Marking) UQN B UOQN B BAS BAS Momentary Momentary Without amp Incandescent Without amp Incandescent Without amp Incandescent Without amp Incandescent N N N N N N N N UQN➁ UQN➁ UQN➁ UQN➂➁ UQN➂➁ UQN➂➁ UOQN➁ UOQN➁ UOQN➁ UOQN➂➁ UOQN➂➁ UOQN➂➁ UQNB➁ UQNB➁ UQNB➁ UQN➂➁ UQN➂➁ UQN➂➁ UOQNB➁ UOQNB➁ UOQNB➁ UOQN➂➁ UOQN➂➁ UOQN➂➁ See pages to for lamps. olor ode and Operating Voltage ode Specify a code in place of ➁ or ➂ in the Part No. ➁ ens olor ode Specify a lens color code in place of ➁. : clear (square units only) O: orange : red S: blue W: white lear lens is not available for rectangular units. Square Extended : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A ➂ Operating Voltage ode ectangular Marking B: V A/D B: V A/D B: V A/D B: /V A B: V A B: /V A B: V A B: V A B: /V A B: V A Full voltage Transformer Input Dimensions UQN Momentary BAS/Full Voltage M Terminal M. Terminal Panel Thickness. to. UQN Momentary BAS/Transformer M. Terminal s Panel Thickness. to. UOQN BAS/Full Voltage M Terminal M. Terminal s Panel Thickness. to. UOQN BAS/ Transformer M. Terminal s Panel Thickness. to.. ( blocks) ( blocks) UQN B Momentary BAS/Full Voltage M Terminal M. Terminal s Panel Thickness. to. ( blocks) ( blocks) UQN B Momentary BAS/Transformer M. Terminal s Panel Thickness. to. ( blocks) ( blocks) UOQN B BAS/Full Voltage M. Terminal M Terminal Panel Thickness. to. ( blocks) ( blocks) UOQN B BAS/Transformer M. Terminal s Panel Thickness. to. ( blocks) ( blocks).. ( blocks) ( blocks).. ( blocks) ( blocks).. ( blocks) ( blocks)... All dimensions in mm.

39 ø ø Series Illuminated Pushbuttons ø Incandescent Push Turn ock Illuminated Pushbuttons Package Quantity: Shape amp eceptacle Operation amp ontact Part No. Applicable amp AN AN➁ Without amp AN➁ BAS Push Turn ock N AN➁ AN➂➁ See pages to for lamps. Incandescent N AN➂➁ AN➂➁ olor ode and Operating Voltage ode Specify a code in place of ➁ or ➂ in the Part No. ➁ ens olor ode ➂ Operating Voltage ode Input Specify a lens color code in place of ➁. : V A/D : V A/D Full voltage : V A/D O: orange : red : /V A S: blue : V A W: white : /V A : V A Transformer : V A : /V A : V A Push Turn ock: Knob is maintained when turned clockwise in the depressed position and is reset when turned counterclockwise. Dimensions AN BAS/Full Voltage M Terminal M. Terminal Panel Thickness. to AN BAS/Transformer M. Terminal s Panel Thickness. to ø ø ø ø ( blocks) ( blocks) ( blocks) ( blocks) All dimensions in mm.

40 ø ø Series Illuminated Pushbuttons ED Pushlock Turn eset/push Turn ock Illuminated Pushbuttons Package Quantity: Shape amp eceptacle Operation amp ontact Part No. Applicable amp ø Mushroom Pushlock Turn eset AVN AVNE ø Mushroom Push Turn ock AJN BAS E Pushlock Turn eset Pushlock Turn eset Without amp ED Without amp ED Without amp N N N N AVNDN AVNDN AVNDN AVN➂DN AVN➂DN AVN➂DN AVNEDN AVNEDN AVNEDN AVNE➂DN AVNE➂DN AVNE➂DN AJNDN➁ AJNDN➁ See pages to for lamps. BAS Push Turn ock N AJNDN➁ AJN➂DN➁ ED AJN➂DN➁ N AJN➂DN➁ olor ode and Operating Voltage ode Specify a code in place of ➁ or ➂ in the Part No. ➁ ens/ed olor ode ➂ Operating Voltage ode Input Specify a lens/ed color code in place of ➁. : V A/D : V A/D Full voltage A: amber : V A/D : /V A : red : V A W: white : /V A Y: yellow Transformer : V A : V A : /V A Pushlock Turn eset: ens is maintained when pressed and is reset when turned clockwise. ed lens only. Note: AVN and AVNE pushlock turn reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use XN or HN series emergency stop switches (ISO and IE -- compliant). Push Turn ock: ens is maintained when turned clockwise in the depressed position and is reset when turned counterclockwise. Dimensions AVN BAS/Full Voltage M Terminal M. Terminal Panel Thickness. to. AVN BAS/Transformer M. Terminal s Panel Thickness. to. AVNE E/Full Voltage M Terminal M. Terminal Panel Thickness. to. AVNE E/Transformer M. Terminal s Panel Thickness. to. ø ø ø. ( blocks). ( blocks).. ( blocks). ( blocks) ( blocks) ( blocks) AJN BAS/Full Voltage M. Terminal M Terminal Panel Thickness. to. M. Terminal s Panel Thickness. to. ø ø PU SH O K ø. ( blocks). ( blocks). AJN BAS/Transformer. ( blocks). ( blocks). ( blocks). ( blocks). All dimensions in mm.

41 ø ø Series Illuminated Pushbuttons ø Incandescent Pushlock Turn eset/push Turn ock Illuminated Pushbuttons Package Quantity: Shape amp eceptacle Operation amp ontact Part No. Applicable amp ø Mushroom Pushlock Turn eset AVN AVNE ø Mushroom Push Turn ock AJN BAS E Pushlock Turn eset Pushlock Turn eset Without amp Incandescent Without amp Incandescent Without amp N N N N AVNN AVNN AVNN AVN➂N AVN➂N AVN➂N AVNEN AVNEN AVNEN AVNE➂N AVNE➂N AVNE➂N AJNN➁ AJNN➁ See pages to for lamps. BAS Push Turn ock N AJNN➁ AJN➂N➁ Incandescent AJN➂N➁ N AJN➂N➁ olor ode and Operating Voltage ode Specify a code in place of ➁ or ➂ in the Part No. ➂ Operating Voltage ode ➁ ens olor ode Incandescent (BAS) Incandescent (E) Specify a lens color code in place of ➁ in the : V A/D Part No. : V A/D : V A/D A: amber : red : /V A : V A : /V A : V A : V A : /V A : V A : /V A : V A : /V A : V A : V A : /V A : V A Full voltage Input Transformer Pushlock Turn eset: ens is maintained when pressed and is reset when turned clockwise. ed lens only. Note: AVN and AVNE pushlock turn reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use XN or HN series emergency stop switches (ISO and IE -- compliant). Push Turn ock: ens is maintained when turned clockwise in the depressed position and is reset when turned counterclockwise. Dimensions AVN BAS/Full Voltage M Terminal M. Terminal Panel Thickness. to. AVN BAS/Transformer M. Terminal s Panel Thickness. to. AVNE E/Full Voltage M Terminal M. Terminal Panel Thickness. to. AVNE E/Transformer M. Terminal s Panel Thickness. to. ø ø ø. ( blocks). ( blocks).. ( blocks). ( blocks) ( blocks) ( blocks) AJN BAS/Full Voltage M Terminal M. Terminal Panel Thickness. to. M. Terminal s Panel Thickness. to. ø ø PU SH O K ø. ( blocks). ( blocks). AJN BAS/Transformer. ( blocks). ( blocks). ( blocks). ( blocks). All dimensions in mm.

42 ø ø Series Selector Switches ASN Selector Switches (Knob Operator) Package Quantity: ASN Knob: Black ound bezel (metal): hrome-plated Units marked with differ in shape. See page for dimensions. When a terminal cover is required, order an applicable terminal cover referring to page. Nameplates are ordered separately. -position -position ontact onfiguration NO -N EM-B NO -N EM-B ontact onfiguration -N -N N N -N -N N N ontact Block Operator Position Mounting Position ontact N NO N NO N EM B N NO N NO N EM B ASN ASN ASN ASN Spring eturn from ight Spring eturn from eft ASNS (Note) ontact Block Operator Position Mounting Position ontact N N NO N NO N N N N N N N N N N NO N NO N N N N N N N N ASN ASN ASNS ASNS ASNS ASN ASN ASN ASN ASNS (Note) Spring eturn from eft ASN ASN ASNS ASNS ASNS ASN ASN ASN ASN ASNS (Note) ASN ASN ASNS ASNS ASNS Note: The overlapping time is shorter for left to right than right to left. Take overlapping time into consideration. ASN ASN ASN ASN ASNS (Note) Spring eturn from ight ASN ASN ASNS ASNS ASNS

43 ø ASN-T Selector Switches (Knob Operator) ASN-T ø Series Selector Switches ø [Twin od Type] Package Quantity: Knob: Black ound bezel (metal): hrome-plated When a terminal cover is required, order an applicable terminal cover referring to page. Nameplates are ordered separately. ontact onfiguration ontact Block Operator Position Mounting Position ontact Spring eturn from eft Spring eturn from ight -position NO NO NO NO NO NO NO NO NO NO ASN-T ASN-T ASN-T ASN-T ASN-T ASN-T ASN-T are twin-rod units.

44 ø ø Series Selector Switches ASN Selector Switches (ever Operator) ASN Package Quantity: ever: Black ound bezel (metal): hrome-plated Units marked with differ in shape. See page for dimensions. When a terminal cover is required, order an applicable terminal cover referring to page. Nameplates are ordered separately. -position -position ontact onfiguration NO -N EM-B NO -N EM-B ontact onfiguration -N -N N N -N -N N N ontact Block Operator Position Mounting Position ontact N NO N NO N EM B N NO N NO N EM B ASN ASN ASN ASN Spring eturn from ight Spring eturn from eft ASNS (Note) ontact Block Operator Position Mounting Position ontact N N NO N NO N N N N N N N N N N NO N NO N N N N N N N N ASN ASN ASNS ASNS ASNS ASN ASN ASN ASN ASNS (Note) Spring eturn from eft ASN ASN ASNS ASNS ASNS ASN ASN ASN ASN ASNS (Note) ASN ASN ASNS ASNS ASNS Note: The overlapping time is shorter for left to right than right to left. Take overlapping time into consideration. ASN ASN ASN ASN ASNS (Note) Spring eturn from ight ASN ASN ASNS ASNS ASNS

45 ø ASN -T Selector Switches (ever Operator) ASN -T ø Series Selector Switches ø [Twin od Type] Package Quantity: ever: Black ound bezel (metal): hrome-plated When a terminal cover is required, order an applicable terminal cover referring to page. Nameplates are ordered separately. ontact onfiguration ontact Block Operator Position Mounting Position ontact Spring eturn from eft Spring eturn from ight -position NO NO NO NO NO NO NO NO NO NO ASN-T ASN-T ASN-T ASN-T ASN-T ASN-T ASN -T are twin-rod units.

46 ø ø Series Selector Switches ASN K Key Selector Switches Package Quantity: ASN K ylinder: hrome-plated ound bezel (metal): hrome-plated On spring-returned types, the keys can be released only from the maintained position. On maintained types, the key can be released from every position. Key retained positions are also available. See page. Key selector switch is supplied with two standard keys. Two different keys are available upon request. When a terminal cover is required, order an applicable terminal cover referring to page. Nameplates are ordered separately. -position -position ontact onfiguration NO -N EM-B NO -N EM-B ontact onfiguration -N EM-B EM-B EM-B -N EM-B EM-B EM-B ontact Block Operator Position Mounting Position ontact N NO N NO N EM B N NO N NO N EM B ASNK ASNK ASNK ASNK Spring eturn from ight Spring eturn from eft ASNKS (Note) ontact Block Operator Position Mounting Position ontact N N NO N N EM B EM B EM B EM B N N NO N N EM B EM B EM B EM B ASNK ASNK ASNKS ASNKS ASNKS ASNK ASNK ASNK ASNK ASNKS (Note) Spring eturn from eft ASNK ASNK ASNKS ASNKS ASNKS ASNK ASNK ASNK ASNK ASNKS (Note) ASNK ASNK ASNKS ASNKS ASNKS Note: The overlapping time is shorter for left to right than right to left. Take overlapping time into consideration. ASNK ASNK ASNK ASNK ASNKS (Note) Spring eturn from ight ASNK ASNK ASNKS ASNKS ASNKS

47 ø ø Series Selector Switches ø ASN K-T Key Selector Switches [Twin od Type] Package Quantity: ASN K-T ylinder: hrome-plated ound bezel (metal): hrome-plated On spring-returned types, the keys can be released only from the maintained position. On maintained types, the key can be released from every position. Key retained positions are also available. See page. Key selector switch is supplied with two standard keys. Two different keys are available upon request. When a terminal cover is required, order an applicable terminal cover referring to page. Nameplates are ordered separately. -position -position ontact onfiguration NO -N EM-B NO -N EM-B ontact onfiguration NO -N N N NO -N N N ontact Block Operator Position Mounting Position ontact N NO N NO N EM B N NO N NO N EM B Spring eturn from ight Spring eturn from eft ASNK-T ASNK-T ASNK-T ASNK-T ASNKS-T ontact Block Operator Position Mounting Position ASN-T are twin-rod units. ontact NO NO NO NO NO N N N N N N N N NO NO NO NO NO N N N N N N N N ASNK-T ASNK-T ASNKS-T ASNKS-T ASNKS-T ASNK-T ASNK-T ASNK-T ASNK-T ASNKS-T Spring eturn from eft ASNK-T ASNK-T ASNKS-T ASNKS-T ASNKS-T ASNK-T ASNK-T ASNK-T ASNK-T ASNKS-T Spring eturn from ight ASNK-T ASNK-T ASNKS-T ASNKS-T ASNKS-T

48 ø ø Series Selector Switches Dimensions Knob Operator Dimensions of knob operator marked with or "-T" in the Part No. M. Terminal Panel Thickness. to. M. Terminal Panel Thickness. to. ever Operator Key Selector Dimensions of key selector switches marked with "-T" in the Part No. M. Terminal Panel Thickness. to. M. Terminal Panel Thickness. to.. ø ø ø ø ( or blocks) ( or blocks) ( or blocks) ( or blocks) Dimensions of lever operator marked with or "-T" in the Part No. M. Terminal Panel Thickness. to. M. Terminal Panel Thickness. to. ø ø ( or blocks) ( or blocks). ( or blocks) ( or blocks).. ( or blocks) ( or blocks) ( or blocks) ( or blocks). All dimensions in mm. ontact Block Mounting Position and ontact onfiguration hart eft enter ight Operator position NO N N

49 ø ASTN Selector Switches (Knob Operator) ø Series Selector Switches ø Package Quantity: No. of Positions ASTN Knob operator: Black ound bezel (metal): hrome-plated -position ontact onfiguration -N ontact onfiguration ontact Block Operator Position Mounting Position ontact N NO N N ASTN ASTN ontact Block Operator Position Mounting Position ontact Spring eturn from ight ASTN ASTN Spring eturn from eft Spring eturn from ight Spring eturn Two-way -position -N -N N -N NO -N ASTN NO NO ASTN ASTN ASTN ASTN N N NO ASTN ASTN ASTN ASTN N N NO ASTN NO NO N ASTN ASTN N NO ASTN ASTN NO NO ASTN ASTN NO NO N ASTN NO N NO ASTN N NO ASTN N Notes:. The operator of the -way spring return unit may slightly deviate from the center position.. Turn the operator to each position accurately. ontact Block Mounting Position and ontact onfiguration hart eft enter ight Dimensions M. Terminal Panel Thickness. to. NO N N Operator Position ( blocks) ( blocks) ø

50 ø ø Series Selector Switches No. of Positions ASTN Selector Switches (ever Operator) ASTN ever operator: Black ound bezel (metal): hrome-plated Package Quantity: -position ontact onfiguration -N ontact onfiguration ontact Block Operator Position Mounting Position ontact N NO N N ASTN ASTN ontact Block Operator Position Mounting Position ontact Spring eturn from ight ASTN ASTN Spring eturn from eft Spring eturn from ight Spring eturn Two-way -position -N -N N -N NO -N ASTN NO NO ASTN ASTN ASTN ASTN N N NO ASTN ASTN ASTN ASTN N N NO ASTN NO NO N ASTN ASTN N NO ASTN ASTN NO NO ASTN ASTN NO NO N ASTN NO N NO ASTN N NO ASTN N Notes:. The operator of the -way spring return unit may slightly deviate from the center position.. Turn the operator to each position accurately. ontact Block Mounting Position and ontact onfiguration hart eft enter NO N N ight Operator Position Dimensions M. Terminal ( or blocks) ( blocks) Panel Thickness. to. ø.

51 ø ø Series Selector Switches ø No. of Positions ASTN K Key Selector Switches ASTN K ylinder: hrome-plated ound bezel (metal): hrome-plated On the spring-returned, the keys can be released only from the maintained position. On the maintained, the key can be released from every position. Key retained positions are also available. See page. Package Quantity: -position ontact onfiguration -N ontact onfiguration ontact Block Operator Position Mounting Position ontact N NO N N ASTNK ASTNK ontact Block Operator Position Mounting Position ontact Spring eturn from ight ASTNK ASTNK Spring eturn from eft Spring eturn from ight Spring eturn Two-way -position -N -N N -N NO -N ASTNK NO NO ASTNK ASTNK ASTNK ASTNK N N NO ASTNK ASTNK ASTNK ASTNK N N NO ASTNK NO NO N ASTNK ASTNK N NO ASTNK ASTNK NO NO ASTNK ASTNK NO NO N ASTNK NO N NO ASTNK N NO ASTNK N Notes:. The operator of the -way spring return unit may slightly deviate from the center position.. Turn the operator to each position accurately. ontact Block Mounting Position and ontact onfiguration hart eft enter NO N N ight Operator Position Dimensions M. Terminal ( or blocks) ( blocks) Panel Thickness. to. ø.

52 ø ø Series Illuminated Selector Switches ASN Illuminated Selector Switches -position Package Quantity: ASN (Base BAS) ontact Block Mounting Position ontact onfiguration ontact Operator Position amp Spring eturn from ight Spring eturn from eft Without amp ASNN➁ ASNN➁ ASNN➁ N ED ASN➂DN➁ ASN➂DN➁ ASN➂DN➁ Incandescent ASN➂N➁ ASN➂N➁ ASN➂N➁ Without amp ASNN➁ ASNN➁ ASNN➁ NO ED ASN➂DN➁ ASN➂DN➁ ASN➂DN➁ Incandescent ASN➂N➁ ASN➂N➁ ASN➂N➁ Without amp ASNN➁ ASNN➁ ASNN➁ N -N NO ED ASN➂DN➁ ASN➂DN➁ ASN➂DN➁ N olor ode and Operating Voltage ode Specify a code in place of ➁ or ➂ in the Part No. ➁ ens/ed olor ode A: amber : red S: blue W: white Y: yellow Incandescent ASN➂N➁ ASN➂N➁ ASN➂N➁ ➂ Operating Voltage ode ED Incandescent ED Incandescent Use a pure white (PW) ED for yellow (Y) illumination. A: amber : red S: blue W: white : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A On the -position selector switches marked with above, the contact operation is reversed as follows. [Example] Input Full voltage Transformer ontact Block Mounting Position and ontact onfiguration hart eft N NO N ight Operator Position Dimensions M. Terminal s. M Terminal ( blocks) A: ( blocks) B:. ( blocks),. ( blocks) Panel Thickness. to. (including nameplate) ø ø A: Full voltage B: Transformer ø

53 ø ASN Illuminated Selector Switches ø Series Illuminated Selector Switches ø -position Package Quantity: ontact Block Mounting Position Operator Position ontact onfiguration ontact amp Spring eturn from ight Spring eturn from left Spring eturn Two-way Without amp ASNN➁ ASNN➁ ASNN➁ ASNN➁ NO ED ASN➂DN➁ ASN➂DN➁ ASN➂DN➁ ASN➂DN➁ Incandescent ASN➂N➁ ASN➂N➁ ASN➂N➁ ASN➂N➁ N Without amp ASNN➁ ASNN➁ ASNN➁ ASNN➁ N N ED ASN➂DN➁ ASN➂DN➁ ASN➂DN➁ ASN➂DN➁ -N NO N NO N N NO NO NO N N N N Incandescent ASN➂N➁ ASN➂N➁ ASN➂N➁ ASN➂N➁ Without amp ASNN➁ ASNN➁ ASNN➁ ASNN➁ ED ASN➂DN➁ ASN➂DN➁ ASN➂DN➁ ASN➂DN➁ Incandescent ASN➂N➁ ASN➂N➁ ASN➂N➁ ASN➂N➁ Without amp ASNN➁ ASNN➁ ASNN➁ ASNN➁ ED ASN➂DN➁ ASN➂DN➁ ASN➂DN➁ ASN➂DN➁ Incandescent ASN➂N➁ ASN➂N➁ ASN➂N➁ ASN➂N➁ Without amp ASNN➁ ASNN➁ ASNN➁ ASNN➁ ED ASN➂DN➁ ASN➂DN➁ ASN➂DN➁ ASN➂DN➁ Incandescent ASN➂N➁ ASN➂N➁ ASN➂N➁ ASN➂N➁ olor ode and Operating Voltage ode Specify a code in place of ➁ or ➂ in the Part No. ➁ ens/ed olor ode ➂ Operating Voltage ode ED Incandescent ED Incandescent A: amber : red S: blue W: white Y: yellow Use a pure white (PW) ED for yellow (Y) illumination. A: amber : red S: blue W: white : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A Input Full voltage Transformer ontact Block Mounting Position and ontact onfiguration hart eft enter NO N N ight Operator Position Dimensions M. Terminal s. M Terminal ( blocks) A: ( blocks) B:. ( blocks),. ( blocks) Panel Thickness. to. (including nameplate) ø ø A: Full Voltage B: Transformer ø

54 ø ø Series Selector Pushbuttons ABN ing Operator / ABN ever Operator Selector Pushbuttons ABN M. Terminal Shape ing Operator ( -position) Panel Thickness. to. (including nameplate) ø ø M. Terminal ø ø ABN Panel Thickness. to. (including nameplate) ever Operator ( -position) M. Terminal Panel Thickness. to. (including nameplate) ø M. Terminal ø Panel Thickness. to. (including nameplate) -N ircuit ode A I G D B I D E F H ontact Block Mounting Position ontact ofiguration ontact ing/ever Pushbutton Normal Push Normal Push ing Operator Part No. N ABN➀ N NO ABN➀ NO Blocked N ABN➀ NO ABN➀ N N NO ABN➀ NO N N NO ABN➀ NO N N NO ABN➀ NO N N NO ABN➀ NO N N NO ABN➀ NO N N NO ABN➀ NO N N Blocked NO ABN➀ NO Package Quantity: ever Operator Part No. ABN➀ ABN➀ ABN➀ ABN➀ ABN➀ ABN➀ ABN➀ ABN➀ ABN➀ ABN➀ ➀ Button olor ode B: black : red Y: yellow Specify a button color code in place of ➀ in the Part No. ing/ever (metal): hrome-plated Notes. ircuit odes A, B,, and I: When the ring or lever operator is turned, the button is pushed in.. ircuit odes E and F: The right and left N contact blocks on circuit code E or F may overlap each other while turning the ring or lever operator. The NO and N contact blocks on circuit code F may overlap each other while pressing the button.. ircuit odes G and H: The pushbutton does not operate when the ring or lever operator is turned to the left position.. When using the selector pushbutton, do not turn the ring or lever operator with the pushbutton depressed. Otherwise, damage or failure may be caused. ontact Block Mounting Position Mounting Hole ayout ing Operator ever Operator

55 ø AN/ANS Series Mono-lever Switches Single lever offers up to four directions of control Mono-lever switches operate in four directions using a single lever. Switch contacts are actuated in the direction in which the lever is pushed, enabling quick and accurate control in any desired direction. Ideal for machine tools and industrial machines. The lever action can be maintained or springreturned in any combination. Also available with interlock mechanism to prevent inadvertent actuation. ø Applicable Standards Mark File No. or Organization U U isting File No. E SA. No. GB. SA File No. No. Specifications and atings ontact atings ontact Block ated Insulation Voltage ated ontinuous urrent ontact atings by Utilization ategory IE -- B V A A- (A) D- (P) haracteristics ontact atings by Utilization ategory Operational Voltage V V V V V V Operational urrent A A- ontrol of resistive loads and solid state loads A A A A A / Hz A- ontrol of electromagnetic loads (> VA) A A A A A D D- ontrol of resistive loads and solid state loads A A.A.A D- ontrol of electromagnets A A.A.A Note: The operational current represents the classification by making and breaking currents (IE --). Specifications ontact onfiguration Operating Temperature Storage Temperature Operating Humidity Insulation esistance Dielectric Strength Mechanical ife Electrical ife ever Knob Weight (approx.) Double-break slow action Each contact block contains two independent contacts (,, N) Up to four contact blocks can be mounted to + (no freezing) to + (no freezing) to % H (no condensation) MΩ minimum (V D megger) Between live and dead parts:,v A, minute, operations minimum (Interlocking:, operations minimum) Black g (AN--) B ontact Block The contact block is made of nylon resin. Each contact block contains two pairs of double-break silver contacts. There are three types as shown in the diagram below and up to four contact blocks can be mounted in any direction. A wide vari ety of circuits allows diverse combinations of control. ontrol Mechanism When the operator lever is pushed to about in each direction from the neutral position, the contact in that direc tion activates. The lever can operate in two, three, or four directions, and combinations of maintained or springreturn from any position are possible.

56 ø AN/ANS Series Mono-lever Switches Mono-lever Switches Operator Position ever Action Part No. Dimensions (mm) AN (ong ever) ANS (Short ever) AN (Interlocking) -position (Up-Down) -position (eft-ight) -position (Up-Down-eft- ight) -position (Up-Down) -position (eft-ight) -position (Up-Down-eft- ight) -position (Up-Down) Spring return Spring return Spring return Spring return Spring return Spring return Spring return AN--➃B AN--➃B AN--➃B AN--➃B AN--➃B AN--➃B ANS--➃B ANS--➃B ANS--➃B ANS--➃B ANS--➃B ANS--➃B AN--➃B AN--➃B M. Terminal block:, blocks: blocks:, blocks: Panel Thickness. to ø Minimum horizontal/vertical mounting centers: M. Terminal ø block:, blocks: blocks:, blocks: Minimum horizontal/vertical mounting centers: ø Panel Thickness. to ø M. Terminal Panel Thickness. to -position (eft-ight) Spring return AN--➃B AN--➃B ø ø The operator lever is locked only in the center position. -position (Up-Down-eft- ight) Spring return AN--➃B AN--➃B block:, blocks: blocks:, blocks: Minimum horizontal/vertical mounting centers: Specify ontact onfiguration from the table below in place of ➃. Terminal covers are ordered separately. ever Operator Position Panel ut-out Mono-ever with Terminal over Up. max.. +. ight ø eft Down Ordering Information When ordering, specify items ➀ to ➄ according to the following example. ➀ ➁ ➂ ➃ ➄ [Example] AN B ➀ Model AN ANS AN ➁ No. of ontact Blocks : block : blocks : blocks : blocks ➂ ever Action Order of Entry: Up ight Down eft : : Spring return : Blocked Up ight Down ➃ ontact Arrangement Order of Entry: Up ight Down eft : NO : N : : : N : Blocked eft ➄ ever Knob olor B: black To calculate the number of contact blocks required, add the number : ontacts marked with do not operate. of NO and N contacts on each pair of adjoining positions (up + right, right + down, down + left, and left + up). The largest of the four sums is the number of contact blocks required. Up to four contact blocks can be mounted. When U and SA markings are required on the mono-lever switch, specify as shown below. [Example] AN--B- U ontact Block Position Terminal No. Direction of ever Operation ever Operation Mode : : Spring return : Blocked NO N NO NO NO N N Terminal No. N ontact Block Type B-E B-E B-E B-E

57 ø AN/ANS Series Accessories and eplacement Parts ø Accessories and Maintenance Parts Shape Specification Part No. Ordering No. Package Quantity Description MO Nameplate ø. MO hrome-plated brass (matte surface) MOPN Terminal over AN-V AN-V Terminal covers are ordered separately. When ordering, specify the Part No. and the required quantity. Order pieces for each contact block. B-E B-E contact ontact Block (B) B-E B-E contact B-E B-E N contact Bellows AN-B AN-B For AN/ANS (ocking ring not included) Bellows (Interlocking) AN-B AN-B For AN (ocking ring not included) Knob ANB-➀ ANB-➀ Specify a color code in place of ➀. B (black), G (green), (red) For AN/ANS

58 ø/ø standard circuits to choose from Wide variety of heavy-duty oiltight cam switches Operators available up to positions ontact blocks rated at V, A Ideal for ammeter/voltmeter applications U listed and SA approved Applicable Standards Mark File No. or Organization GB. No. (ASNO, ASNK) No. (ASSO, ASSK) No. (USQO, USQM) Specifications and atings S Series am Switches (except ASSO and ASSK) ontact atings ated Insulation Voltage ated ontinuous urrent ontact atings by Utilization ategory IE -- V A A- (A) D- (P) haracteristics ontact atings by Utilization ategory Operational Voltage V V V V Operational urrent A A- ontrol of resistive loads and solid state loads A A A / Hz A- ontrol of electromagnetic loads (> VA) A A A D D- ontrol of resistive loads and solid state loads A A A.A D- ontrol of electromagnets A.A.A.A Note: The operational current represents the classification by making and breaking currents (IE --). Specifications Double-break slow action contacts ontact onfiguration Two contacts in one deck Up to decks available (Spring-return: Up to decks) Operation Spring return Angle,,, Operator Positions to,, Operating Temperature to + (no freezing) Storage Temperature to + (no freezing) Operating Humidity to +% H (no condensation) Insulation esistance MΩ (V D megger) Dielectric Strength V A, minute (between live and dead parts) Mechanical ife to decks:, operations to decks:, operations Electrical ife, operations minimum ASNO, ASSO: IP (IE ) Degree of Protection ASNK, ASSK: IP (IE ) US: IP (IE ) Weight (approx.) g (ASNO--SB) SB ontact Block The SB contact block contains two poles of double-break contacts. The contacts are operated by a cam designed to perform a required contact operation. Up to six contact blocks can be mounted on a maintained-action operator base, and up to three contact blocks on a spring return operator base. M. Terminal

59 ø S Series am Switches ø/ø am Switches ➀ Model ø Series ASNO ø Series ASSO ➁ ontact Block Decks ➂ Positions ➃ Angle ➄ Spring eturn ➅ Handle ➆ ontact Arrangement Nameplate (Photo: ASNO with Y handle) ASNK ASSK H Handle Key (black) : to decks Spring return: to decks : to decks Spring return: to decks : to positions Spring return: to positions : to positions Spring return: to positions :,,, Spring return: only :, Spring return: only Spring return from right Spring return from left Spring return two-way Spring return from right Spring return from left Spring return two-way Y, S, P, F, S (S is for ASSO only) (one specified handle supplied) Two standard keys are supplied. When the H key handle is required, specify H. See page to. See page. (ordered separately) Standard Key ( keys supplied) USQO (Enclosed) : to decks Spring return: to decks : to positions Spring return: to positions :,,, Spring return: only Spring return from right Spring return from left Spring return two-way Type Q See page. (Photo: With Y handle) USQM (Enclosed) Indicator eft: Green ight: ed eft ight Spring eturn -way Spring return: to decks Spring return: positions Spring return: only Spring return two-way Y, S, F, P (one specified handle supplied) See page to. Type QM See page. For handles and accessories, see page and. Dimensions ASNO/ASSO ASNK/ASSK Panel ut-out M. Terminal Panel Thickness. to M. Terminal Panel Thickness. to. max. +.. ø (S Handle) +. N+. * Spring eturn: : N: Number of ontact Blocks N+ * Spring eturn: : N: Number of ontact Blocks +. ø. (ASSO/ASSK) +. ø. (ASNO/ASNK) Minimum horizontal/vertical mounting centers With P handle: With other handles: USQO. Panel Thickness. max. -M USQM. Panel Thickness. max. -M Panel ut-out -ø. ø M. Terminal N+ Spring eturn: : N: Number of ontact Blocks All dimensions in mm. (Y Handle) M. Terminal N+ N: Number of ontact Blocks (P Handle) Minimum horizontal/vertical mounting centers With P handle: With other handles:

60 ø/ø S Series am Switches Ordering Information When ordering, specify items ➀ through ➆ as the designation example below. ➀ ➁ ➂ ➃ ➄ ➅ ➆ ontact Block Spring Model Positions Angle Handle ircuit No. Decks eturn ➀ ASNO ASNK ASSO ASSK USQO USQM ➁ ➂ ➃ ➄ Decks ode Positions ode Angle ode eturn ode Spring return O from left Spring return O from right Spring return two-way deck decks decks decks decks decks Spring return: to decks only positions positions positions positions positions positions positions positions positions positions positions Spring return: to positions only ASNK/ASSK: and only Spring return: only Spring return code is required only for spring return. ➅ (ode) Y, S, P, F, H, S (olor) B: Black See table below. S is for ASSO only. ➆ For standard contact configuraions, use designation code on pages to. For custom contact configurations, use the ustom ontact ongifuration Specifica tion Sheet on page. Designation Example USQO - - SB - ➀ ➁➂➃ ➄ ➅ ➆. When a special contact configuration is required, specify the contact configuration using the ustom ontact onfiguration Specification Sheet on page.. A specified handle is attached.. Accessories such as nameplates and jumpers are separately ordered.. The key of the key operated cam switch is removable from every position. Specify other key removable configura tions if required. Handle Designation ode Shape ode olor ø, ø Y Handle Y ø, ø S Handle S ø, ø S Handle. S Applicable am Switch ASNO ASSO USQO USQM ASSO ø, ø P Handle ø, ø F Handle ø P F B: black ASNO ASSO USQO USQM Key Handle H ASNK ASSK Spring eturn Operation Available combinations of operator positions, angles, and return directions are listed in the table below. Positions -position -position -position -position From eft From ight From eft From ight Two-way From eft From ight Two-way eturn Direction ➂ ➃ ➄ odes O O O O O O Applicable am Switches ASNO, ASSO, ASNK, ASSK, USQO USQM ontact Block Decks to decks Note: do not require spring return code ➄.

61 ø S Series Accessories and eplacement Parts ø/ø Accessories and eplacement Parts Jumper J- J- ubber Boot Shape Material Part No. Ordering No. Metal (copper) Package Quantity J- J-PN J- J-PN emarks For connecting terminals of adjoining contact blocks For connecting terminals of the same contact block Nitril rubber - - For preventing ingress of dust into the contact blocks Not applicable for the USQO and USQM Terminal over S-V-S Supplied with selftapping screws for mounting S-V-S Plastic (PPE) S-V-S S-V-S S-V-S S-V-S For to decks of contact blocks For to decks of contact blocks ø, ø Y Handle Shape Material (olor) Part No. Ordering No. Package Quantity Polybutylene terephthalate (Black) SH-YB SH-YB ø, ø S Handle Polybutylene terephthalate (Black) SH-SB SH-SB ø S Handle. Phenol resin (Black) SH-SB SH-SB ø, ø P Handle ø, ø F Handle ø Phenol resin (Black) SH-PB SH-PB Bakelite (Black) SH-FB SH-FB Key Handle Phenol resin (Black) SH-HB SH-HB Spare Keys Metal (brass nickel-plated) SH-K SH-KPN Handle Shaft Polyamide S-HF S-HFPN Handle Handle For Y, ø S, and ø S handles M For P and F handles M S-SW-M- S-SW-M-PN S-SW-M- S-SW-M-PN

62 ø/ø S Series Instructions Instructions Installing the Terminal over for the S series am Switches omplete wiring before installing the terminal cover on the bottom plate of the contact block. The terminal cover has six holes. Of the four round holes at four corners, use two diagonal pair of holes to install the terminal cover. Either pair can be used. Insert the attached self-tapping screws into the pair of holes and tighten the screws to a torque of. to. N m. For through decks of contact blocks, use terminal cover S-V-S. For through decks of contact blocks, use terminal cover S-V-S. The S-V-S consists of the S-V-S and a termi nal cover for the fourth through sixth decks. ombine the two parts together as shown. Note that once combined, the two parts cannot be separated. Minimum Mounting enters for Installing the Terminal over mm min. (P handle: mm) mm min. (P handle: mm) Mounting Hole Bottom Plate Self-tapping (attached) Insert the screws into a diagonal pair of holes. Although the minimum mounting centers are mm hori zontally and mm vertically, determine the mounting cen ters in consideration of convenience of wiring. For the P handle, the minimum mounting centers are mm hori zontally and vertically. S-V-S Mounting Hole S-V-S For through decks of contact blocks (S-V-S) Terminal over Dimensions. (S-V-S). (S-V-S) (S-V-S). (S-V-S). (S-V-S). (S-V-S) N+.. (N: Number of ontact Blocks) All dimensions in mm.

63 ø S Series Instructions ø/ø Standard ontact onfigurations The following table lists standard contact configurations for easy designation of required cam switch operation. When other contact configurations are required, specify the number of contact block decks, operator positions, angles, and contact operation using the ustom ontact onfiguration Specification Sheet on page. Symbol ontacts closed. No. of Decks: Position: -position Angle: Spring eturn: -way ircuit No. Terminal No. Operator Position The arrow shows the spring return direction. ontact Operation ontacts remain closed between two operator posi tions. Overlapping ontacts ontacts of different decks are both closed at one point while the handle is turned to the next position. esidual ontacts When the handle is returned to the center, the contacts remain closed. The contacts are opened when the handle is turned to the opposite direction. isting Order of the Table The standard contact configurations are listed in the order of the circuit number. Same ircuits Shown in the following examples, circuits of Fig. and Fig. have the same functions. When ordering, examine the standard contact configurations. Your requirements may be satisfied simply by changing external wiring of the standard contact configurations. Example Fig. Fig. Example Fig. Fig. Terminal Numbers The terminal numbers on the contact blocks correspond with the numbers shown in the chart as shown below. ➄ ➀ ➆ ➂ ➅ ➁ ➃ Terminal No. Terminal No. Operator Position Standard ontact onfiguration hart O O O

64 ø/ø S Series Instructions (O) () (S) (T) () (S) (T) (O) (S) (ST) (T) (O) () (S) (T) (O) () (S) (T)

65 ø S Series Instructions ø/ø (O) () (S) (T) (S) (ST) (T) (E) (SE) (TE) Application Examples (Voltmeter and Ammeter ircuits) (ammeter switching, T circuit) (ammeter switching, T circuit) (ammeter switching, T circuit) T E S A T S T E S S T A T S T E S O S T (voltmeter switching, PT circuit) (voltmeter switching, PT circuit) (voltmeter switching, PT circuit) A S T E PT ø W S V S T PT S O S ST T V S T E PT ø W S V (ammeter switching, T circuit) (ammeter switching, T circuit) (ammeter switching, T circuit) T S T S O S T A T S T E S O S T A T S T E S O S T A E

66 ø/ø S Series Instructions ustom ontact onfigurations Specification Sheet The preceding pages provide standard contact configurations. When other contact configurations are required, specify the number of contact block decks, operator posi tions, angles, and contact operation using the ustom ontact onfiguration Specification Sheet shown below. For available number of contact blocks and operator posi tions, see the Ordering Information on page.. Specify operator positions Indicate the operator positions starting at the first position. When spring return operation is required, mark an arrow between two operator positions to indicate the spring return direction. Deck Deck Angle Positions Spring eturn. Specify contact operation at each operator position Indicate the required operation of all contacts at each operator position using the following symbols. Symbol ontact Operation ontacts closed. ontacts remain closed between two operator posi tions. Overlapping ontacts ontacts of different decks are both closed at one point while the handle is turned to the next position. Overlapping contacts are not available for handle angles of and. esidual ontacts When the handle is returned to the center, the con tacts remain closed. The contacts are opened when the handle is turned to the opposite direction. One deck of contact block contains two poles of contacts and four terminals. When the handle is made to turn or more, special attention is needed. Since one cam oper ates the two poles of contacts on opposite positions, the same contact operation repeats on the other pole of con tacts when the handle is turned. When different con tact operation is needed for handle angles of or more, use another deck of contact block. S Series am Switch ustom ontact onfiguration Specification Sheet Part No.: ➀ Model ➁ Decks ➂ Positions ➃ Angle ➄ Spring eturn ➅ Handle Quantity: Deck Terminal No. ontact onfiguration hart Terminal No. Deck Deck Deck Deck Deck Deck Angle Positions Spring eturn

67 ø Terminal overs ø Series Accessories and eplacement Parts ø Terminal over N-V N-V N-V APN-PV APD-PV Use of terminal covers increases the depth by the dimensions below. ø Series Switches & Pilot ights.h W H.W.H W H W H W Terminal over Pilot ight APN, APNE, UPQN, UPQNE Pilot ight APD, APDE Full Voltage X X +. mm +. mm Pilot ight APN, APNE, APD, APDE, UPQN, UPQNE Transformer D-D onverter X +. mm Pushbutton ABN, ABD, AON, AOD, AVN, ABGD, AJN, ABFD, ATN, AOFD, UBQN, AVD, UOQN, AJD, UWQN, AZD, ABBN, AYD, ABBS (ø) Selector Switch ASN, ASD, ASTN Selector Pushbutton ABN, ASBD contact block Terminal over B contact blocks B B contact blocks B B B contact blocks B B B B X X pieces X pieces X pieces + mm Illuminated Pushbutton AN, AD, ANE, ADE, AON, AOD, AONE, AODE, AGN, AGD, AGNE, AGDE, AOGN, AOGDE, AFN, AFD, AFNE, AFDE, AOFN, AOFD, AOFNE, AOFDE, AVN, AVD, AVNE, AVDE, AJN, AJD, AJNE, AJDE, UQN, UOQN Full Voltage X pieces +. mm Illuminated Selector Switch ASN, ASD Transformer D-D onverter X +. mm Push-to-heck Pilot ight APN P Ordering Terminal overs When ordering terminal covers, specify the Part No. and the quantity. Terminal over (N-V) Terminal over (N-V)

68 ø ø Series Accessories and eplacement Parts Nameplates Model egend Material Part No. Ordering No. Package Quantity Dimensions (mm) Applicable Unit NA- Blank NA- NA With egend Aluminium. mm thick White letters on black background NA- NA-PN NA-. ø.. ø switches & pilot lights NA- PN NAO Blank Aluminium. mm thick Black NAO NAO NAOPN.. ø. MO Blank Brass (chrome-plated). mm thick Matte MO MO MOPN Q-. ø. ø etters should not be engraved within this line With adhesive tapes on the back AN/ANS Mono-ever Blank Q- Q With egend (egend odes and only) Aluminium. mm thick White letters on black background Q- Q-PN Q- Q- PN ø -ø. USQO am Switch QM- With adhesive tapes on the back Blank QM- QM With egend (egend ode only) Aluminium. mm thick White letters on black background QM- QM-PN QM- QM- PN -ø. ø USQM am Switch Specify a legend code in place of in the Ordering No.

69 ø ø Series Accessories and eplacement Parts ø Nameplates Model egend Material Part No. Ordering No. Package Quantity QN- Dimensions (mm) With adhesive tapes on the back Applicable Unit Blank QN- QN With egend (egend odes,, and only) Aluminium. mm thick White letters on black background QN- QN-PN QN- QN- PN ø. ASNO, ASNK am Switches ø mm Selector Switches QS- With adhesive tapes on the back Blank QS- QS With egend (egend ode only) Aluminium. mm thick White letters on black background QS- QS-PN QS- QS- PN ø. ASSO, ASSK am Switches ø mm Selector Switches Specify a legend code in place of in the Ordering No. egends ode egend (blank) ON OFF STAT STOP OFF-ON HAND-AUTO HAND-OFF-AUTO Shape and Engraving Area.. Example Shape Engraving Area Height Width Max. No. of ines No. of etters on ine Standard arge The above example is when the letter is mm tall. Standard Type NA arge Type NAO

70 ø ø Series Accessories and eplacement Parts Accessories ocking ing Wrench Shape Material Part No. Ordering No. Package Quantity Dimensions (mm) Used to tighten the locking ring when installing the ø or ø switch onto a panel. Nitril rubber O- O- ø ø ø ø ø ø ø ø ø Series ø Series amp Holder Tool Used to install and remove the ED/incandescent lamps. See page. Nitril rubber O- O- ø. O ontact ubber Boot For momentary layer of contact blocks ( contact blocks) Nitril rubber (black) O- O- ubber boot used to prevent oil and dirt from entering into the contact block. Temperature range: to + annot be used for zinc diecast switches & pilot lights. ontact ubber Boot Anti-rotation ing For layer of contact blocks ( contact blocks) For layers of contact blocks ( contact blocks) Silicone rubber (translucent) O- O- O- O- Applicable to AVN and AJN. Applicable to ø diecast zinc pushbuttons and selector switches.... (.) Used to prevent the operator from turning. Generally used when using no nameplates on selector switches and selector pushbuttons. Metal (diecast) (zinc-plated) OG- OG-PN ø... ø ubber Mounting Hole Plug Nitril rubber (black) OB-B OB-BPN Used to plug unused ømm mounting holes. Gray also available. Ordering No.: OB-PN ø ø ø Plastic Mounting Hole Plug Plastic (gray) Plug: ABS Gasket: hloroprene rubber OBP- OBP- Tightening torque:. N m. Degree of protection: IP M P. ø ocking ing Metallic Mounting Hole Plug Tightening torque:. N m. Degree of protection: IP Metal (diecast) (zinc-plated) OB- OB- M P. ø

71 ø ø Series Accessories and eplacement Parts ø Accessories Shape Material Part No. Button over for Extended Pushbuttons Nitril rubber Ordering No. olor Part No. Black O-B O-B Green O- O- ed O-G O-G Yellow O-Y O-Y Package Dimensions (mm) Quantity Metallic bezels cov ered with a rubber boot to enhance waterproof characteristics. Button is not included. Applicable to extended pushbuttons only. M P. ø ø Button lear Boot For flush pushbuttons For extended pushbuttons EPDM rubber O- O- O- O- Used to cover and pro tect pushbuttons where units are subject to water splash. Not suit able for outdoor use or where the units are sub ject to oil splash. A B O- O- A B Dust-proof ubber over for Jumbo Mushrooms Used for ABNG pushbuttons. Panel Thickness. to. Nitril rubber (black) O-GN O-GN ø Padlock over Used to protect pushbuttons, illuminated pushbuttons, and selector switches (knob operator).. Panel Thickness. to. Polyarylate (gasket: nitryl rubber) O-K O-K. ø Key Hole ø Waterproof ubber Gasket.t Metal Protector Used to protect flush pushbuttons from inadvert ent operation. an be easily attached using the locking ring.. Metal (zinc-plated brass) O- O- Mounting enters min. ø... ocking Attachmentt Used to lock an extended pushbutton in the depressed position. an be easily attached using the locking ring. Metal (zinc-plated brass) O-H O-H ocking Plate ø hole. ø... Mounting Plate

72 ø ø Series Accessories and eplacement Parts Maintenance Parts Metallic Bezel Shape Specification Part No. Ordering No. Metal (zinc diecast: chromeplated) Package Quantity OG- OG-PN emarks annot be used with pin lock, selector pushbuttons, and monolever units. Plastic Bezel lear Plastic Bezel for Flush Pushbuttons Polycarbonate OGP- OGP- PN OGP- OGP-PN Specify a color code in place of. B (black), G (green), (red), W (white), Y (yellow) annot be used with pin lock, selector pushbuttons, and monolever units. lear Plastic Bezel for Extended Pushbuttons lear Plastic Bezel for Illuminated Pushbuttons Acrylic (clear) OGP- OGP-PN lear plastic bezel and full shroud. OGP- cannot be used with ED illumination units and diecast units. OGP- OGP- Metal Bezel for Illuminated Pushbuttons Metal (zinc diecast) O- O-PN lear Button over Marking Plate Polycarbonate (clear) ABNB- ABNB-PN Polyacetal TN- TN- PN Used on flush and extended pushbut tons to indicate a mark or a symbol engraved on the marking plate. The clear button cover holds the marking plate. The ø series marking chip can only be used on the ABN and AON. Specify a color code in place of. B (black), G (green), (red), W (white), Y (yellow)

73 ø Maintenance Parts ø Series Accessories and eplacement Parts ø ontact Block (BS: Dark gray) ontact Block (BST: ight gray) ens ➋ ➌ ens Button ➊ ➋ ➌ Shape Description Mate rial Part No. Ordering No. ➊ ➋ ➌ NO contact N contact EM contact (early make) B contact (late break) NO contact N contact EM contact (early make) B contact (late break) ➊ Used for APN(E) ➋ Used for UPQNE U(O)QN B ➌ Used for UPQNB U(O)QN ➊ Used for AN, AON (ED) ➋ Used for AN, AON (incandescent) (W) ➌ Used for AN, AON (incandescent) (W) AS resin AS resin BSE BSE-MAU BSE BSE-MAU BSSE BSE BSE-MAU BSE BSE-MAU BSSE BSSE-MAU BSSE-MAU BSSE BSSE BSSE-MAU BSSE-MAU BST BST-MAU BST BST-MAU BST BST-MAU BST BST-MAU Package Quantity BSTS BSTS BSTS BSTS APNN-➁ APNN-➁PN UPQN-➁ UPQN-➁PN UPQND-➁ UPQND-➁PN olor Push rod color: Green -MAU has gold contacts Push rod color: ed -MAU has gold contacts Push rod color: Black -MAU has gold contacts Push rod color: White -MAU has gold contacts Push rod color: Green Push rod color: ed Push rod color: Black Push rod color: White -MAU has gold contacts Applicable Units: Pushlock Turn eset Push Turn ock ED Illuminated Pushbutton ED Illuminated Selector Switch Incandescent Illumi nated Selector Switch A (amber), (clear), G (green), (red), S (blue), W (white), Y (yellow) Use the white (W) lens for pure white (PW) illumination (clear), G (green), (red), S (blue) Use the clear () lens for white illumi nation. A (amber), Y (yellow) Use the amber (A) lens for orange illu mination. UQN-➁ UQN-➁PN (clear), G (green), (red), S (blue) A (amber), W (white), Y (yellow) UPQND-➁ UPQND-➁PN Use the amber (A) lens for orange illu mination. AN-➁ AN-➁PN (clear), G (green), (red), S (blue) A (amber), W (white), Y (yellow) AND-➁ AND-➁PN Use the white (W) lens for pure white (PW) illumination AN-➁ AN-➁PN (clear), G (green), (red), S (blue) AND-➁ AND-➁PN A (amber), W (white) Use the amber (A) lens for orange illu mination. AN-➁ AN-➁PN (clear), G (green), (red), S (blue) AND-➁ AND-➁PN A (amber), W (white) Use the amber (A) lens for orange illu mination. Flush ABNB-➀ ABNB-➀PN G (green), (red), Y (yellow) Extended ABNB-➀ ABNB-➀PN Above colors are used for ø switches & pilot lights (dark colored operator units). Mushroom For black, use black buttons from light ABNB-➀ ABNB-➀PN Polyacetal colored operator units. Button Flush ABNBN-➀ ABNBN-➀PN B (black), G (green), (red), S (blue), Extended ABNBN-➀ ABNBN-➀PN Mushroom ABNBN-➀ ABNBN-➀PN Button ➊ Mushroom (ABN) Ureaformaldehyde ABNB-➀ ABNB-➀ ➊ ➋ ➋ Mushroom (ABNG/ resin ABNGB-➀ ABNGB-➀ ABNF) ➌ ➍ ➌ Square Flush (UBQN) UBQNB-➀ UBQNB-➀PN ➍ Square Polyacetal Extended UBQNB-➀ UBQNB-➀PN (UBQN) Note: Specify a button color code or lens color code in place of ➀ or ➁ in the Ordering No. Y (yellow), W (white) Above colors are used for ø diecast zinc switches & pilot lights (light colored operator units). B (black), G (green), (red), Y (yellow)

74 ø ø Series Accessories and eplacement Parts Maintenance Parts Button Shape Description Material Part No. Ordering No. For ø pushlock turn reset pushbuttons (for AVN) Package Quantity emarks AS resin AVNB-➁ AVNB-➁ (red), Y (yellow) ens ens For ø pushlock turn reset pushbuttons (for AVN, AVNE) For ø pushlock turn reset pushbuttons (for AJN) AS resin AVN- AVN-PN ed only AS resin AJNB-➁ AJNB-➁ B (black), G (green), (red), Y (yellow) ens For ø pushlock turn reset pushbuttons (for AJN) AS resin AJN-➁ AJN-➁ -G (green), - (red), -Y (yellow), -A (amber), -W (white) Marking Plate For UPQN Acrylic UPQNN-W UPQNN-WPN ubber Washer (.mm thick) OW- OW-PN ubber Washer (.mm thick) Synthetic soft vinyl OW- OW-PN Shroud ➊ Half shroud (for pushbuttons) ABNG ABNG ➊ ➋ ➋ Full shroud (for pushbuttons) ABNF ABNF ➌ ➍ ➌ Full shroud (for mushroom pushbuttons) ABNG ABNG ➎ ➍ Shallow shroud (for jumbo mushrooms) ➎ Deep shroud (for jumbo mushrooms) Metal (zinc diecast) ABNG ABNG ABNF ABNF ➏ ➐ ➏ Half shroud (for illuminated pushbuttons) ANG ANG ANG ANG For incandescent/ed illuminated pushbuttons (E base) For ED illuminated pushbuttons (BAS base) Selector Knob ➐ Full shroud (for illuminated pushbuttons) Knob for Illuminated selector switch AS resin ANF ANF ANF ANF ASNH ASNH-* ASNHD ASNHD-* For incandescent/ed illuminated pushbuttons (E base) For ED illuminated pushbuttons (BAS base) G (green), (red), S (blue) A (amber), W (white), Y (yellow)

75 ø Maintenance Parts ø Series Accessories and eplacement Parts ø Spare Key Spare Key Transformer Pin/hain Shape Description Material Part No. Ordering No. Package Quantity ASNK/K,ABN ASN-TSK- ASN-TSK-PN ASN K Metal (nickel ASN-SK- ASN-SK-PN plated ASN K -T brass) ASN K TW-SK- TW-SK-PN /V A (for ED/W incandescent lamps) /V A (for ED/W incandescent lamps) For ABNP pinloock TW-N TW-N TW-N TW-N Metal ABNP-PIN ABNP-PIN emarks Applicable to ABNK, ABNK, ABN Mounting screws are not included. Pin, chain, and plate for ABNP ED amps Dimensions. Base BAS/ Base E/ ø Operating Voltage V A/D ±% V A/D ±% V A/D ±% V A/D ±% V A/D ±% V A/D ±% urrent Draw Part No. Ordering No. ➁ Illumination Package A D olor ode Quantity ma ma STD-➁ (A,, W) A: amber. ma STD-➁ (G, PW, S) STD-➁PN PW: pure white : red STD-➁ S: blue ma ma STD-➁ W: white STD-➁PN Use a pure white ma ma STD-➁ STD-➁ (PW) ED lamp for yellow (Y) STD-➁PN illumination. ma ma ETD-➁ (A,, W) (A,, W) ma. ma ETD-➁ A: amber (G, PW, S) (G, PW, S) ETD-➁PN PW: pure white ma. ma ETD-➁ Use a pure white ETD-➁ : red S: blue ETD-➁PN W: white ETD-➁ (PW) ED for yellow ma ma ETD-➁ (Y) illumination. ETD-➁PN Base BAS/ E/ Incandescent amps Dimensions ated Operating Voltage amp atings Part No. V A/D W (.V) S- Package Quantity ife Base BAS/ V A/D W (V) S- V A/D W (V) S-.±. ø± V A/D W (V) S- V A/D W (.V) E- Approx. hours minimum (reference value) Base E/ ± ø± V A/D W (V) E- V A/D W (V) E- V A/D W (V) E- Specify a color code in place of ➁ in the Order ing No.

76 ø ø Series Accessories and eplacement Parts Transformer DIN ail Mount Primary Voltage Secondary Voltage Part No. Applicable oad For V /V A TW /V A.V TW One full voltage pilot light or illuminated switch containing STD-➁, ETD-➁ ED lamp (V A/D) or S- incandescent lamp (. V A/D, W) /V A TW For V For V ED /V A TW /V A V TW /V A TW /V A TW /V A V TW /V A TW One full voltage pilot light or illuminated switch containing E- incandescent lamp (V A/D, W) One full voltage pilot light or illuminated switch containing STD-➁, ETD-➁ ED lamp (V A/D) Specifications Part No. TW TW Operating Voltage /V A, /V A, /V A (/Hz) urrent Draw. VA ated Insulation Voltage V Insulation esistance MΩ minimum (V D megger) Operating Temperature to + (no freezing) Storage Temperature to + (no freezing) Operating Humidity to % H (no condensation) Vibration esistance Damage imits: Hz, amplitude. mm Operating extremes: to Hz, amplitude. mm Shock esistance Damage limits, Operating Extremes:, m/s Dielectric Strength,V A, minute Terminal M. Applicable Wire mm maximum, wires maximum Weight (approx.) g Dimensions M. Terminal Secondary Side ø. Mounting Hole Terminal over SE. JAPAN PI. BAA. Primary Side Accessories DIN ail Part No. Ordering No. ength Weight (approx.) Material Package Quantity BAA BAAPN mm g Aluminum BAP BAPPN mm g Steel End lip Part No. Ordering No. Applicable DIN ail Weight (approx.) Material Package Quantity Dimensions BN BNPN BAA BAP g Steel (Zinc-plated) () Use plastic end clip BZ-E/NSN when using /V A primary voltage transformers.

77 ø ø Series Instructions ø Safety Precautions Turn off the power to the ø series switches & pilot lights before starting installation, removal, wiring, maintenance, and inspection of the products. Failure to turn power off may cause electrical shocks or fire hazard. To avoid a burn on your hand, use the lamp holder tool when replacing lamps. For wiring, use wires of a proper size to meet the voltage and current requirements. Tighten the M. terminal screws to a tightening torque of. to. N m. Failure to tighten terminal screws may cause overheat and fire. Instructions Panel Mounting for Square Pushbuttons and Pilot ights. Tighten the square ring to the operator and position the ring correctly.. ightly tighten the screw to secure the pilot light onto the panel. ecommended tightening torque:. N m Tightening Torque for Terminal s Tighten the terminal screws to a torque of. to. N m. eplacement of amps amps can be replaced by using the lamp holder tool (O- ) from the front of the panel. How to emove To remove, slip the lamp holder tool onto the lamp head lightly. Then push slightly, and turn the lamp holder tool counterclockwise. How to Install To install, insert the lamp head into the lamp holder tool. Place the pins on the lamp base to the grooves in the lamp socket. Inset the lamp and turn it clockwise. O- Installing the Anti-rotation ing Anti-rotation rings are used on selector switches or pushbuttons which rotate and used when using no nameplates. Insert a.mm thick rubber washer between the panel and the anti-rotation ring as shown on the right. Panel OG Panel Thickness and ubber Washer Adjust the thickness of the rubber washers according to the panel thickness. Also, make sure to include the nameplate thickness when using a nameplate. Applicable Models Extended Illuminated Pushbuttons with Half Shroud (ED) Extended Pushbuttons with Half Shroud (Diecast) Extended Illuminated Pushbuttons with Half Shroud (Diecast) Panel Thickness (mm) Supplied ubber Washer.mm.mm piece piece. to. piece. to. piece Applicable Models Extended Illuminated Pushbuttons with Full Shroud (Incandescent) Extended Illuminated Pushbuttons with Full Shroud (ED) Extended Illuminated Pushbuttons with Full Shroud (Diecast) Mushroom Pushbuttons with Full Shroud Panel Thickness (mm) ubber Washer.mm.mm Supplied pieces piece. to. piece piece. to. piece piece. to. piece. to. (.) piece The number in brackets is for mushroom pushbuttons with full shroud. Extended illuminated pushbuttons with full shroud (incandescent) are. mm maximum. Applicable Models Toggle ever Knob Push Turn ock Illuminated Pushbuttons Panel Thickness (mm) Supplied ubber Washer.mm.mm piece piece. to. piece piece. to. piece. to. (.) piece The number in brackets is for knob push turn lock illuminated pushbuttons. Applicable Models Extended Pushbuttons with Half Shroud Extended Illuminated Pushbuttons with Half Shroud (Incandescent) Panel ubber Washer Thickness (mm).mm.mm Supplied piece piece. piece piece. to. piece. to. piece Applicable Models Extended Pushbuttons with Full Shroud Panel ubber Washer Thickness (mm).mm.mm Supplied pieces piece. to. pieces piece. to. pieces piece. to. piece piece. to. piece. to. piece Applicable Models Extended Pushbuttons with Full Shroud (Diecast) Panel ubber Washer Thickness (mm).mm.mm Supplied pieces piece. to. pieces piece. to. pieces piece. to. piece. to. piece Applicable Models Other Models (Excluding Square) Panel ubber Washer Thickness (mm).mm.mm Supplied pieces piece. to. pieces piece. to. piece piece. to. piece. to. piece ubber Washer

78 ø ø Series Instructions Installation of ED Illuminated Units. Note the polarity for wiring when connecting to D-D converter unit. Terminal No. Polarity X Positive X Negative. Transformer units are recommended for use in areas subjected to noise.. Notes for Pure White ED amps Do not use the pure white ED outdoors, otherwise it will lead to the degradation of brightness and color. Do not remove or apply shock to the cap on the pure white ED lamp, otherwise it may break or damage the cap. For the pure white ED, use a white lens. The illumination color will be dull if a different color is used. Notes on ED Illuminated Units ED lamps consist of semiconductors. If the applied voltage exceeds the rated voltage, ED elements may deteriorate due to overheat, resulting in significant decrease in lumi nance, hue change, or failure of lighting. Also, if an extrane ous noise, transient voltage, or transient current is applied to the circuit, similar effects may occur. When using ED lamps, observe the following instructions. ated Voltage The ED lamps are rated at V, V, or V A/D, and can be used within ±% the rated voltage of either A or D. D Power. Switching power supply egulated voltage from switching power supply is best suited. Make sure to use within the rated voltage of the ED lamp.. echargeable battery Note that the battery voltage may exceed the rated voltage of the ED lamp while the battery is being charged and immediately after the charging is complete. Be sure to use the ED lamp on a voltage of ±% the rated volt age.. Full-wave rectification Since the ED lamp is A/D compatible, a diode bridge for rectification is not necessary. If the ED lamp is used on a full-wave rectification current through a diode bridge, the rectifier diodes will reduce the voltage, result ing in lower luminance.. Single-phase half-wave rectification This is not suitable for the power source of ED lamps. Use constant-voltage D power. Noise ED elements deteriorate due to extraneous noise, resulting in significant decrease in luminance, hue change, or fail ure of lighting. When such effects are anticipated, take a protection measure shown below, such as elements or a surge absorber. [Protection Example ] For A circuit ED with transformer ED elay y coil or solenoid [Protection Example ] For D circuit + ED ED with transformer (eference values) : Ω :. μf (eference values of the diode) Forward current: More than the y coil current everse withstand voltage: y coil current elay y coil or solenoid ED Diode ountermeasures against Dim ighting. eakage currents through the transistors or a contact protection circuit may cause the ED lamp to illuminate dimly even when the output is off.. When the ED lamp is illuminated by a transistor output, take the following measure. [ircuit Example] onnect shunt resistor in parallel with the ED lamp. Io ED Io: eakage current when the output is off : Shunt resistor

79 ø ø Series Diecast Zinc Switches & Pilot ights Heavy duty switches for tough industrial usage Degree of protection: IP (IE ) U, SA approved, and EN compliant Applicable Standards Mark File No. or Organization U SA. No. EN-- U isting File No. E SA File No. EU ow Voltage Directive GB. No. Specifications and atings ontact atings Pushbuttons Illuminated Pushbuttons Selector Switches Illuminated Selector Switches Selector Pushbuttons ontact Block ated Insulation Voltage ated ontinuous urrent ontact atings by Utilization ategory IE -- BST (ø series) V A A- (A) D- (P) Weight (Examples) Weight (approx.) g (ABD N) g (APDDN) g (ADDN) g (ASDN) g (ASDKN) g (ASDDN) g (ASBDN-A) haracteristics ontact atings by Utilization ategory Operational Voltage V V V V V V Operational urrent A A- ontrol of resistive loads and solid state loads A A A A A / Hz A- ontrol of electromagnetic loads (> VA) A A A A A D D- ontrol of resistive loads and solid state loads A A.A.A D- ontrol of electromagnets A A.A.A Note: The operational current represents the classification by making and breaking currents (IE --). Minimum applicable load: V A/D, ma (applicable range may vary with operating conditions and load types) BST ontact Block (ight Gray) M. Terminal Interlocking Groove ontact Blocks Single-pole ontact Block ontact NO N EM (early make) B (late break) Inspection Window Push od Mounting Part BST BST BST BSTS BSTS No. Push od Green ed Black White Note: BST contact blocks are not interchangeable with dark gray BS contact blocks used for ø switches & pilot lights. Specifications, ratings, and mounting hole layouts are the same as ø switches & pilot lights. See ø Series Switches & Pilot ights on page.

80 ø ø Series Diecast Zinc Switches & Pilot ights Ordering Information Standard Units Specify an operator or lens color code in the Part No. Black, green, and red colored buttons are included with flush pushbuttons. Terminal covers, nameplates, and accessories are ordered separately. Terminal over When a terminal cover is required, order an applicable terminal cover referring to page. The Part No. development charts shown below can be used to specify switches & pilot lights other than those listed on the following pages. ø Series Diecast Zinc Pushbuttons ABD N Button color code ontact onfiguration : NO : N : : : : -N : NO : NO : NO-N : NO-N : NO : N : NO-N : -N Note: Mushroom pull AZD can have a maximum of two contact blocks. Mushroom push pull AYD can have a maximum of two contact blocks. ø Series Diecast Zinc Pilot ights ø Series Diecast Zinc Illuminated Pushbuttons ADE D N ens color code ontact configuration : : : N : NO-N : -N : NO-N : NO : N Operating voltage code amp receptacle E: E (ETD-➁ ED or W incandescent lamps) (blank): BAS (STD-➁ ED or W incandescent lamps) Note: Illuminated pushbuttons cannot have an odd number of contact blocks, such as NO, N, NO, -N, NO-N, and N. APDE D N ens color code Operating voltage code amp receptacle: E: E (ETD-➁ ED or W incandescent lamps) (blank): BAS (STD-➁ ED or W incandescent lamps)

81 ø ø Series Diecast Zinc Switches & Pilot ights ø ø Series Diecast Zinc Selector Switch ASD N ontact configuration Operator (blank): Knob : ever Number of positions ø Series Diecast Zinc Illuminated Selector Switch ASD D N ens color code ontact configuration Operating voltage code Number of positions ø Series Diecast Zinc Key Selector Switch ASD K N B Key removable position code -position (blank): emovable in all positions B: emovable in left only : emovable in right only Spring return from right (blank): emovable in left only Spring return from left (blank): emovable in right only -position (blank): emovable in all positions B: emovable in left and center : emovable in right and center D: emovable in center only E: emovable in right and left G: emovable in left only H: emovable in right only Spring return from right (blank): emovable in left and center D: emovable in center only G: emovable in left only Spring return from left (blank): emovable in right and center D: emovable in center only H: emovable in right only Spring return two-way (blank): emovable in center only ontact configuraion Number of positions Note: The key cannot be removed in the return position.

82 ø ø Diecast Zinc Series Pushbuttons Flush / Extended / Extended with Half Shroud / Extended with Full Shroud Flush ABD Flush AOD Extended ABD Extended AOD Shape Operation ontact Part No. ➀ Button olor ode NO ABDN➀ N ABDN➀ Momentary ABDN➀ Black (B), green (G), and red ABDN➀ () buttons are N ABDN➀ sup plied with -N ABDN➀ each unit. NO AODN➀ Specify S, Y, N AODN➀ or W when a blue, yellow, or AODN➀ white button is AODN➀ required. N AODN➀ -N AODN➀ NO ABDN➀ N ABDN➀ Momentary ABDN➀ ABDN➀ N ABDN➀ -N ABDN➀ NO AODN➀ N AODN➀ AODN➀ AODN➀ N AODN➀ -N AODN➀ Extended with Half Shroud ABGD Extended with Half Shroud AOGD Extended with Full Shroud ABFD Extended with Full Shroud AOFD Momentary Momentary NO N N -N NO N N -N NO N N -N NO N N -N ound bezel and shroud (metal): hrome-plated Pushbuttons with one or three contact blocks contain a dummy block Other contact configurations are also available. See page. ABGDN➀ ABGDN➀ ABGDN➀ ABGDN➀ ABGDN➀ ABGDN➀ AOGDN➀ AOGDN➀ AOGDN➀ AOGDN➀ AOGDN➀ AOGDN➀ ABFDN➀ ABFDN➀ ABFDN➀ ABFDN➀ ABFDN➀ ABFDN➀ AOFDN➀ AOFDN➀ AOFDN➀ AOFDN➀ AOFDN➀ AOFDN➀ Specify a button color code in place of ➀ in the Part No. B: black : red S: blue W: white Y: yellow M. Terminal Dimensions (mm) ( to blocks) ( to blocks) M. Terminal. ( or blocks) ( or blocks) M. Terminal.. ( or blocks).. ( or blocks) M. Terminal Panel Thickness. to. ø Panel Thickness. to. ø ø. ø ø ø Panel Thickness. to... ( or blocks). ( or blocks) Panel Thickness. to ø ø. ø ø ø ø

83 ø Mushroom / Jumbo Mushroom Pushbuttons ø Diecast Zinc Series Pushbuttons ø Shape Operation ontact Part No. ➀ Button olor ode Mushroom NO ABDN➀ ABD N ABDN➀ ABDN➀ Momentary ABDN➀ N ABDN➀ -N ABDN➀ Mushroom NO AODN➀ AOD N AODN➀ AODN➀ AODN➀ Mushroom with Full Shroud ABGD Mushroom with Full Shroud AOGD Jumbo Mushroom ABD Jumbo Mushroom with Shallow Shroud ABGD Jumbo Mushroom with Deep Shroud ABFD Momentary Momentary Momentary Momentary N -N NO N N -N NO N N -N NO N N -N NO N N -N NO N N -N AODN➀ AODN➀ ABGDN➀ ABGDN➀ ABGDN➀ ABGDN➀ ABGDN➀ ABGDN➀ AOGDN➀ AOGDN➀ AOGDN➀ AOGDN➀ AOGDN➀ AOGDN➀ ABDN➀ ABDN➀ ABDN➀ ABDN➀ ABDN➀ ABDN➀ ABGDN➀ ABGDN➀ ABGDN➀ ABGDN➀ ABGDN➀ ABGDN➀ ABFDN➀ ABFDN➀ ABFDN➀ ABFDN➀ ABFDN➀ ABFDN➀ Specify a button color code in place of ➀ in the Part No. ound bezel and shroud (metal): hrome-plated Pushbuttons with one or three contact blocks contain a dummy block Other contact configurations are also available. See page. B: black : red W: white Y: yellow B: black DG: dark green D: dark red : red Y: yellow M. Terminal M. Terminal Dimensions (mm). ( or blocks) ( or blocks) M. Terminal. ( or blocks) ( or blocks). ( or blocks) ( or blocks) M. Terminal. ( or blocks) ( or blocks) M. Terminal. ( or blocks). ( or blocks) Panel Thickness. to. ø Panel Thickness. to. ø Panel Thickness. to. ø Panel Thickness. to. ø ø Panel Thickness. to. ø ø

84 K ø ø Diecast Zinc Series Pushbuttons Pushlock Turn eset / Push Turn ock / Pull / Push-Pull / Pin ock Pushbuttons Shape ontact Part No. ➀ Button olor ode Mushroom Pushlock Turn eset NO AVDN➀ AVD N AVDN➀ AVDN➀ : red AVDN➀ Y: yellow N AVDN➀ -N AVDN➀ Mushroom Push Turn ock NO AJDN➀ AJD N AJDN➀ B: black AJDN➀ AJDN➀ : red Y: yellow N AJDN➀ -N AJDN➀ Mushroom Pull AZD NO AZDN➀ AZDN➀ M. Terminal. ( or blocks) ( or blocks) M. Terminal. ( or blocks) ( or blocks) Dimensions (mm) Panel Thickness. to. ø ø PUSH Panel Thickness. to. O AZDN➀ M. Terminal Panel Thickness. to. N AZDN➀ Mushroom Push-Pull AYD AYDN➀ N AYDN➀ AYDN➀ B: black : red S: blue Y: yellow. ( or blocks). ø Pin ock ABDP NO N N -N ABDPN➀ ABDPN➀ ABDPN➀ ABDPN➀ ABDPN➀ ABDPN➀ M. Terminal. ( or blocks) ( or blocks) Panel Thickness. to.. ø ø ø Specify a button color code in place of ➀ in the Part No. ound bezel (metal): hrome-plated Pushbuttons with one or three contact blocks contain a dummy block. Other contact configurations are also available. See page. Pushlock Turn eset: Button is maintained when pressed and is reset when turned clockwise. ed buttons only. Note: AVD pushlock turn reset switches cannot be used as emer gency stop switches. When emergency stop switches are required, use XN or HN series emergency stop switches (ISO and IE -- compliant). Push Turn ock: Button is locked when turned clockwise in the depressed position and is reset when turned counterclockwise. Pull: Pulling the button operates the contacts. Up to contact blocks ( layer) can be mounted on pull switches. Push-Pull: Button is maintained in both depressed and reset positions. Up to contact blocks ( layer) can be mounted on AYD push-pull switches. Note: AYD push-pull switches cannot be used as emergency stop switches. When emergency stop switches are required, use the HNE series emergency stop switches (ISO and IE -- compliant). Pin ock: Button can be locked in either depressed or reset posi tion by inserting the pin. Pad lock with a ømm pin can also be used to lock the button. ontact Operation Pull Switch (Spring eturn) AZD ontact Normal Pull NO N N Push-Pull Switch () AYD ontact Push Pull N Note: Pull and push-pull switches can have a maximum of two contact blocks.

85 ø APD / APDE Dome Pilot ights ø Diecast Zinc Series Pilot ights ø Dome APD APDE Shape amp Without amp BAS E amp eceptacle Part No. APDN➁ APDEN➁ ➁ ens/ed olor ode A: amber : clear : red S: blue W: white DNY: yellow Applicable amp ED BAS E APD➂DN➁ APDE➂DN➁ A: amber PW: pure white : red S: blue W: white Y: yellow A: amber : red S: blue W: white Y: yellow See pages and for lamps. Incandescent BAS E Full Voltage Transformer Full Voltage Transformer APD➂N➁ APDE➃N➁ APD➃N➁ A: amber : clear : red S: blue W: white Operating Voltage ode Specify an operating voltage code in place of ➂ in the Part No. ➂ or ➃ Operating Voltage ode ➂ ED ➂ Incandescent (BAS) ➃ Incandescent (E) : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A Specify a lens/ed color code in place of ➁ in the Part No. Use a pure white (PW) ED for yellow (Y) illumination.. : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A Input Full Voltage Transformer Dimensions Full Voltage M. Terminal Panel Thickness. to. ø ø ø. Transformer M. Terminal Panel Thickness. to. ø ø ø. All dimensions in mm.

86 ø ø Diecast Zinc Series Illuminated Pushbuttons AD / AOD ound Extended Illuminated Pushbuttons Shape ound Extended AD AOD amp eceptacle BAS Operation amp ontact Part No. ADN➁ Without amp ADN➁ N ADN➁ AD➂DN➁ Momentary ED AD➂DN➁ N AD➂DN➁ AD➂N➁ Incandescent AD➂N➁ N AD➂N➁ AODN➁ Without amp AODN➁ N AODN➁ AOD➂DN➁ ED AOD➂DN➁ N AOD➂DN➁ AOD➂N➁ Incandescent AOD➂N➁ N AOD➂N➁ Applicable amp See pages and for lamps. olor ode and Operating Voltage ode Specify a code in place of ➁ and ➂ in the Part No. ➁ ens/ed olor ode ➂ Operating Voltage ode Without amp ED Incandescent ED Incandescent (BAS) A: amber : clear : red S: blue W: white DNY: yellow A: amber PW: pure white : red S: blue W: white Y: yellow A: amber : clear : red S: blue W: white Use a pure white (PW) ED for yellow (Y) illumination.. : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A Input Full Voltage Transformer Dimensions AD/AOD Full Voltage AD/AOD BAS/Transformer M. Terminal M Terminal Panel Thickness. to. M. Terminal M Terminal Panel Thickness. to. ø ø ø ø ø ø. ( blocks) ( blocks). ( blocks). ( blocks) All dimensions in mm.

87 ø ø Diecast Zinc Series Illuminated Pushbuttons ø AFD / AOFD ound Extended with Full Shroud Illuminated Pushbuttons Shape ound Extended with Full Shroud AFD AOFD amp eceptacle BAS Operation amp ontact Part No. AFDN➁ Without amp AFDN➁ N AFDN➁ AFD➂DN➁ Momentary ED AFD➂DN➁ N AFD➂DN➁ AFD➂N➁ Incandescent AFD➂N➁ N AFD➂N➁ AOFDN➁ Without amp AOFDN➁ N AOFDN➁ AOFD➂DN➁ ED AOFD➂DN➁ N AOFD➂DN➁ AOFD➂N➁ Incandescent AOFD➂N➁ N AOFD➂N➁ Applicable amp See pages and for lamps. olor ode and Operating Voltage ode Specify a code in place of ➁ and ➂ in the Part No. ➁ ens/ed olor ode ➂ Operating Voltage ode Without amp ED Incandescent ED Incandescent (BAS) A: amber : clear : red S: blue W: white DNY: yellow A: amber PW: pure white : red S: blue W: white Y: yellow A: amber : clear : red S: blue W: white Use a pure white (PW) ED for yellow (Y) illumination.. : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A Input Full Voltage Transformer Dimensions AFD/AOFD Full Voltage AFD/AOFD Transformer M. Terminal M Terminal Panel Thickness. to M. Terminal M Terminal Panel Thickness. to ø ø ø ø ø ø. ( blocks) ( blocks). ( blocks). ( blocks) All dimensions in mm.

88 ø ø Diecast Zinc Series Illuminated Pushbuttons AD / AOD Mushroom (ø) Illuminated Pushbuttons Shape ø Mushroom AD AOD amp eceptacle BAS Operation amp ontact Part No. ADDN➁ Without amp ADDN➁ Momentary N ADDN➁ AD➂DN➁ ED AD➂DN➁ N AD➂DN➁ AODDN➁ Without amp AODDN➁ N AODDN➁ AOD➂DN➁ ED AOD➂DN➁ N AOD➂DN➁ Applicable amp See pages and for lamps. olor ode and Operating Voltage ode Specify a code in place of ➁ and ➂ in the Part No. ➁ ens/ed olor ode ➂ Operating Voltage ode Input A: amber : red W: white Y: yellow Use a pure white (PW) ED for yellow (Y) illumination.. : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A Full Voltage Transformer Dimensions AD/AOD Full Voltage AD/AOD Transformer M. Terminal M Terminal Panel Thickness. to. M. Terminal M Terminal Panel Thickness. to. ø ø. ( blocks) ( blocks). ( blocks). ( blocks) All dimensions in mm.

89 ø ø Diecast Zinc Series Illuminated Pushbuttons ø AVD/ AVDE Mushroom Pushlock Turn eset Illuminated Pushbuttons Shape Mushroom Pushlock Turn eset AVD AVDE amp eceptacle BAS E amp ontact Part No. Applicable amp Without amp ED Incandescent Without amp ED Incandescent N N N N N N AVDN AVDN AVDN AVD➂DN AVD➂DN AVD➂DN AVD➂N AVD➂N AVD➂N AVDEN AVDEN AVDEN AVDE➂DN AVDE➂DN AVDE➂DN AVD➂N (Note) AVD➂N (Note) AVD➂N (Note) See pages and for lamps. olor ode and Operating Voltage ode Specify a code in place of ➁ and ➂ in the Part No. ➂ Operating Voltage ode ED Incandescent (BAS) Incandescent (E) : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A Input Full Voltage Transformer Note: When ordering V, V, V A/D units, specify E before the operating voltage code. Example: AVDE➂N olor code: (red) Pushlock Turn eset: ens is maintained when pressed and is reset when turned clockwise. ed lens only. Note: AVD and AVDE pushlock turn reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use XN or HN series emergency stop switches (ISO and IE -- compliant). Dimensions AVD BAS/Full Voltage AVD BAS/Transformer M. Terminal M Terminal Panel Thickness. to. M. Terminal M Terminal Panel Thickness. to. ø. ( blocks) ( blocks).. ( blocks). ( blocks) M. Terminal M Terminal M. Terminal M Terminal Panel Thickness. to. ø ø Panel Thickness. to. ø AVDE E/Full Voltage AVD/AVDE E/Transformer.. ( blocks). ( blocks) ( blocks) ( blocks) All dimensions in mm.

90 ø ø Diecast Zinc Series Selector Switches ASD Selector Switches (Knob Operator) No. of Positions ASD -position ontact onfiguration NO -N ontact onfiguration ontact Block Operator Position Mounting Position ontact Dummy N NO N NO N ontact Block Operator Position Mounting Position ontact Spring eturn from ight Spring eturn from eft ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN Spring eturn from ight Spring eturn from eft Spring eturn Two-way -position NO -N N N NO NO NO NO NO N N N N N N N N ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN Knob: Black ound bezel (metal): hrome-plated Selector switches with one contact block contain a dummy block. On the -position selector switches marked with above, the contact operation is reversed as follows. [Example] ontact Block Mounting Position and ontact onfiguration hart Dimensions eft enter NO N N ight Operator Position Panel Thickness. to. M. Terminal. ( or blocks) ( blocks) ø ø All dimensions in mm.

91 ø ASD Selector Switches (ever Operator) ø Diecast Zinc Series Selector Switches ø No. of Positions ASD -position ontact onfiguration NO -N ontact onfiguration ontact Block Operator Position Mounting Position ontact Dummy N NO N NO N ontact Block Operator Position Mounting Position ontact Spring eturn from ight Spring eturn from eft ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN Spring eturn from ight Spring eturn from eft Spring eturn Two-way -position NO -N N N NO NO NO NO NO N N N N N N N N ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ASDN ever: Black ound bezel (metal): hrome-plated Selector switches with one contact block contain a dummy block. On the -position selector switches marked with above, the contact operation is reversed as follows. [Example] ontact Block Mounting Position and ontact onfiguration hart Dimensions eft enter NO N N ight Operator Position Panel Thickness. to. M. Terminal. ( or blocks) ( blocks). ø ø All dimensions in mm.

92 ø ø Diecast Zinc Series Selector Switches ASD K Key Selector Switches ASD K No. of Positions ontact onfiguration ontact Block Operator Position Mounting Position ontact Spring eturn from ight Spring eturn from eft -position NO -N ontact onfiguration Dummy N NO N NO N ontact Block Operator Position Mounting Position ontact ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN Spring eturn from ight Spring eturn from eft Spring eturn Two-way -position NO -N N N NO NO NO NO NO N N N N N N N N ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ASDKN ylinder: Black ound bezel (metal): hrome-plated On the spring-returned, the keys can be released only from the maintained positions. On the maintained, the key can be released from every position. Key retained positions are also available. See page. Key selector switches are supplied with two standard keys. Key selector switches with one contact block contain a dummy block. On the -position selector switches marked with above, the contact operation is reversed as follows. [Example] ontact Block Mounting Position and ontact onfiguration hart Dimensions eft enter ight Panel Thickness. to. M. Terminal NO N N Operator Position. ( or blocks) ( blocks). ø ø All dimensions in mm.

93 ø ø Diecast Zinc Series Illuminated Selector Switches ø ASD Illuminated Selector Switches -position ASD (Base BAS) ontact onfiguration ontact Block Mounting Position Operator Position ontact amp Spring eturn from ight Spring eturn from eft Without amp ASDN➁ ASDN➁ ASDN➁ N ED ASD➂DN➁ ASD➂DN➁ ASD➂DN➁ Incandescent ASD➂N➁ ASD➂N➁ ASD➂N➁ Without amp ASDN➁ ASDN➁ ASDN➁ NO ED ASD➂DN➁ ASD➂DN➁ ASD➂DN➁ -N N NO N Incandescent ASD➂N➁ ASD➂N➁ ASD➂N➁ Without amp ASDN➁ ASDN➁ ASDN➁ ED ASD➂DN➁ ASD➂DN➁ ASD➂DN➁ Incandescent ASD➂N➁ ASD➂N➁ ASD➂N➁ olor ode and Operating Voltage ode Specify a code in place of ➁ or ➂ in the Part No. ➁ ens/ed olor ode ➂ Operating Voltage ode ED Incandescent ED Incandescent A: amber : red S: blue W: white Y: yellow Use a pure white (PW) ED for yellow (Y) illumination. A: amber : red S: blue W: white : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A On the -position selector switches marked with above, the contact operation is reversed as follows. [Example] Input Full voltage Transformer ontact Block Mounting Position and ontact onfiguration hart eft N NO N ight Operator Position Dimensions M. Terminal s. M Terminal ( blocks) A: ( blocks) B:. ( blocks),. ( blocks) Panel Thickness. to. (including nameplate) ø ø A: Full voltage B: Transformer ø All dimensions in mm.

94 ø ø Diecast Zinc Series Illuminated Selector Switches ASD Illuminated Selector Switches -position ontact onfiguration ontact Block Mounting Position Operator Position ontact amp Spring eturn from ight Spring eturn from left Spring eturn Two-way Without amp ASDN➁ ASDN➁ ASDN➁ ASDN➁ NO ED ASD➂DN➁ ASD➂DN➁ ASD➂DN➁ ASD➂DN➁ Incandescent ASD➂N➁ ASD➂N➁ ASD➂N➁ ASD➂N➁ N Without amp ASDN➁ ASDN➁ ASDN➁ ASDN➁ N N ED ASD➂DN➁ ASD➂DN➁ ASD➂DN➁ ASD➂DN➁ -N NO N NO N N NO NO NO N N N N Incandescent ASD➂N➁ ASD➂N➁ ASD➂N➁ ASD➂N➁ Without amp ASDN➁ ASDN➁ ASDN➁ ASDN➁ ED ASD➂DN➁ ASD➂DN➁ ASD➂DN➁ ASD➂DN➁ Incandescent ASD➂N➁ ASD➂N➁ ASD➂N➁ ASD➂N➁ Without amp ASDN➁ ASDN➁ ASDN➁ ASDN➁ ED ASD➂DN➁ ASD➂DN➁ ASD➂DN➁ ASD➂DN➁ Incandescent ASD➂N➁ ASD➂N➁ ASD➂N➁ ASD➂N➁ Without amp ASDN➁ ASDN➁ ASDN➁ ASDN➁ ED ASD➂DN➁ ASD➂DN➁ ASD➂DN➁ ASD➂DN➁ Incandescent ASD➂N➁ ASD➂N➁ ASD➂N➁ ASD➂N➁ olor ode and Operating Voltage ode Specify a code in place of ➁ or ➂ in the Part No. ➁ ens/ed olor ode ➂ Operating Voltage ode ED Incandescent ED Incandescent A: amber : red S: blue W: white Y: yellow Use a pure white (PW) ED for yellow (Y) illumination. A: amber : red S: blue W: white : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A/D : V A/D : V A/D : /V A : V A : /V A : V A : V A : /V A : V A Input Type Full voltage Transformer ontact Block Mounting Position and ontact onfiguration hart eft enter NO N N ight Operator Position Dimensions M. Terminal s. M Terminal ( blocks) A: ( blocks) B:. ( blocks),. ( blocks) Panel Thickness. to. (including nameplate) ø ø A: Full voltage B: Transformer ø All dimensions in mm.

95 ø ø Diecast Zinc Series Selector Pushbuttons ø ASBD ing Operator / ASBD ever Operator Selector Pushbuttons ing/ever Shape ontact onfiguration ircuit ode ontact Block ing Operator ever Operator olor ing Operator ( -Position) ASBD A G Pushbutton Mounting ontact Normal Push Normal Push Position N Blocked N Part No. Part No. ASBDN-A➀ ASBDN-A➀ ASBDN-G➀ ASBDN-G➀ A N NO N ASBDN-A➀ ASBDN-A➀ NO N N ASBDN-➀ ASBDN-➀ ever Operator ( -Position) ASBD -N D NO N N ASBDN-D➀ ASBDN-D➀ B: black : red Y: yellow E NO N N ASBDN-E➀ ASBDN-E➀ F NO N N ASBDN-F➀ ASBDN-F➀ G NO N N Blocked ASBDN-G➀ ASBDN-G➀ Specify a button color code in place of ➀ in the Part No. ing/ever (Metal): hrome-plated Notes:. ircuit ode G: The pushbutton does not operate when the ring or lever operator is turned to the right position.. ircuit odes E and F: The right and left N contact blocks on circuit code E or F may overlap each other while turning the ring or lever operator. The NO and N contact blocks on circuit code F may overlap each other while pressing the button.. When using the selector pushbutton, do not turn the ring or lever operator with the pushbutton depressed. Otherwise, damage or failure may be caused.. When installing the lever operator, make sure that the lever is not in the horizontal position. Otherwise, shock resistance may be degraded. ontact Block Mounting Position Dimensions M. Terminal Panel Thickness. to. (including nameplate) ing Operator ( -position) ASBD M. Terminal Panel Thickness. to. (including nameplate) ever Operator ( -position) ASBD. ø ø ø ø ( or blocks).. ( or blocks) ( blocks) ( blocks) M Setscrew (The actual screw is located on the opposite side)

96 ø ø Diecast Zinc Series Accessories and eplacement Parts Accessories (For Diecast Zinc Series Only) For other accessories, see pages to. Metal Bezel Shape Material Part No. Ordering No. Package Quantity OG- OG-PN Description Flush (Octagonal) Spare Key Extended (Octagonal) hrome-plated annot be used with half-shrouds. OG- OG- Metal TW-SK- TW-SK-PN For key selector switches Maintenance Parts (For Diecast Zinc Series Only) Button Flush Extended Dummy Block Shape Specification Part No. Ordering No. Mushroom Jumbo Mushroom Selector Operator Knob ever olor Insert Safety Precautions Polyacetal Package Quantity Description ABNBN-➀ ABNBN-➀PN Specify a color code in place of ➀. B (black), G (green), (red), S (blue), W (white), Y (yellow) ABNBN-➀ ABNBN-➀PN Above colors are used for ø ABNBN-➀ ABNBN-➀PN diecast zinc switches & pilot lights (light colored operator units). ABNBN-➀ ABNBN-➀ Polyamide BST-D BST-DPN Polyacetal ASNHT-➀ ASNH-➀ ASNHT-➀PN ASNH-➀PN TW-H➀ TW-H➀PN Specify a color code in place of ➀. B (black), G (green), (red), S (blue), Y (yellow) Used for NO or N contact blocks. Snaps on to the operator unit. Specify a color code in place of ➀. B (blue), G (green), (red) Specify a color code in place of ➀. B (black), G (green), (red), S (blue), W (white), Y (yellow) Turn off the power to the ø diecast zinc switches & pilot lights before starting installation, removal, wiring, maintenance, and starting installation, removing, wiring, maintenance, and inspection of the products. Failure to turn power off may cause electrical shocks or fire hazard. To avoid a burn on your hand, use the lamp holder tool when replacing lamps. For wiring, use wires of a proper size to meet the voltage and current requirements. Tighten the M. terminal screws to a tightening torque of. to. N m. Failure to tighten terminal screws may cause overheat and fire. Instructions Tightening Torque for Terminal s Tighten the M. terminal screws to a torque of. to. N m. eplacement of amps amps can be replaced by using the lamp holder tool (O-) from the front of the panel. How to remove To remove, slip the lamp holder tool onto the lamp head lightly. Then push slightly, and turn the lamp holder tool counterclockwise. How to install To install, insert the lamp head into the lamp holder tool. Place the pins on the lamp base to the grooves in the lamp socket. Inset the lamp and turn it clockwise. Installation of ED Illuminated Units When using full voltage ED illuminated units, provide protection against electrical noise, if necessary. See page for notes on ED illuminated units. O- Specifications and other descriptions in this brochure are subject to change without notice. -, Nishi-Miyahara -home, Yodogawa-ku, Osaka -, Japan Tel: +---, Fax: +---, marketing@idec.co.jp IDE OPOATION (USA) Tel: +--- / () -IDE () opencontact@idec.com IDE ANADA IMITED Tel: +---, Toll Free: () -IDE () sales@ca.idec.com IDE AUSTAIA PTY. TD. Tel: +---, Toll Free: -- sales@au.idec.com IDE EEKTOTEHNIK GmbH Tel: service@eu.idec.com IDE (SHANGHAI) OPOATION Tel: idec@cn.idec.com IDE (BEIJING) OPOATION Tel: +--- IDE (SHENZHEN) OPOATION Tel: +--- IDE IZUMI (H.K.) O., TD. Tel: info@hk.idec.com IDE TAIWAN OPOATION Tel: service@tw.idec.com IDE IZUMI ASIA PTE. TD. Tel: info@sg.idec.com IDE ASIA (THAIAND) O.,TD. Tel: +--, sales@th.idec.com at. No. EP- MAY PDF