Switches & Pilot Devices

Transcription

1 ømm - TW Series features: TW NEMA Switches with snap-on contacts Corrosion resistant octagonal chrome plated locking bezel Snap-on 0A contact blocks LED illumination Slow make, double break, contacts Modular construction for maximum flexibility Type and IP65 watertight/oiltight panel Available assembled or as sub-components Finger-Safe - Spring-Up Large M.5 screw terminals with captive sems plate UL Listed File No. E6896 TW Series mm NEMA Pushbuttons CSA Approved File No. L5 IDEC has your mm switching needs covered. Button styles include flush, extended, mushroom, or square and all bodies are crafted from fracture-resistant nylon. All illuminated units feature two lens styles, one that maximizes light dispersion, the other accommodates direct lens engraving. Contact mechanism allow for a wide current rating, 5mA to 0A, which reduces the need for various contact materials. When looking for a mm switch that is durable, easy to use, and versatile, then IDEC s TW series is your solution. File No. DK Certificate No Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 67

2 ømm - TW Series Conforming to Standards Approvals File No. E6896 File No. L5 Certificate No EN6097-, EN , VDE , UL508, CSA C- No. CSA: pushbuttons and selector switches: A600 pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (00/0, 5, 0, 00/0, 0, 0, 80, 00/0, 80V) UL: pushbuttons and selector switches: A600 pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (00/0, 5, 0, 00/0, 0, 0, 80, 00/0, 80V) TÜV: pushbuttons and selector switches: A600=P600 (N, NC)/Q600 (N-EM, NC-LB) pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (00/0, 5, 0, 00/0, 0, 0, 80, 00/0, 80V) Terminal Blocks Contactors Timers elays & Sockets Signaling Lights Specifications Contact atings egistration No: J95580 (E-Stops) egistration No: J95580 (All other switches) egistration No: J95580 (Pilot Lights) perating Temperature Vibration esistance Shock esistance Electric Shock Protection Degree of Protection (conforming to IEC6059) (conforming to NEMA ICS6-0) Mechanical Life Pollution Degree (conforming to IEC6097-) ated perational Characteristics ated Insulation Voltage ated Switching ver-voltage ated Impulse Withstanding Voltage ated Thermal Current Minimum Switching Capacity Contact peration ecommended Terminal Torque Applicable Wire Size External Short-Circuit Protection Applicable Wire Size Contact esistance Contact Gap Electrical eliability Lamp atings Horsepower ating Contact Material Pushbuttons Illuminated Pushbuttons Selector Switches Illuminated Selector Switches Pushbutton Selectors Contact Block ated Insulation Voltage ated Continuous Current peration: 5 to +50 C (without freezing), Storage: 0 to +80 C (without freezing) 5 to 55Hz, 00m/sec (0g) conforming to IEC m/sec (00g) conforming to IEC Class conforming to IEC IP65 from front of the panel; (IP5 for key switches) IP0 (Type HW-U contact block) Type,,,, S,,, 5,, (Type,,, 5,, for key switches) Momentary pushbuttons: 5,000,000 (800 operations per hour) All other switches: 500,000 AC-5: A600 or Ue = 50V, le = A (N, NC, N-EM, NC-LB) DC-: P600 or Ue = 5V, le =.A (N, NC) DC-: Q600 or Ue = 5V, le = 0.9A (N-EM, NC-LB) 600V Less than kv, conforming to IEC6097- kv for contact circuit,.5kv for lamp circuit 0 Amp 5 ma at V AC/DC Slow break NC or slow make N, self-cleaning Unit Wire Number of Wires HW-U Contact Block Illuminated Unit (*) Pilot Light Solid Wire Stranded Wire ecommended Tightening Torque (Nm) Crimping Terminal.0 to. ø0.5 to.6 mm (AWG to ).0 to. ø.7 to.0 mm (AWG). to. 0. to.0 mm (AWG to ).0 to.. to.5 mm (AWG). to. Crimping Terminal Solid Wire ø0.5 to.6 mm (AWG to ) Stranded Wire 0. to.0 mm (AWG to ) Crimping Terminal Solid Wire ø0.5 to.6 mm (AWG to ) Stranded Wire ø0. to.0 mm (AWG to ). * refers to the lamp terminals of the illuminated push buttons and selector switches. 0A 50V fuse conforming to IEC6069- Minimum x AWG, max. x AWG or x AWG Initial contact resistance of 50mΩ or less mm (N and NC), mm (N-EM and NC-LB) MTBF < fault for 0 million operation cycles (V DC, 5mA) LEDs: 6V: 7mA max, /V: ma max, 0/0V: 0mA max / 0V (single-phase, non-reversing motor); 0V ( phase, non-reversing motor) Silver Contact atings by Utilization Category IEC Type HW-U 600V 0A AC-5 (A600) DC- (P600) Terminal Screw M.5.0 to. M to.0 (M.0).0 to. (M.5) Contact atings by Utilization Category Circuit Breakers Characteristics perational Voltage V 8V 50V 0V 0V 0V AC- Control of resistive loads and solid state loads 0A 0A 0A 6A A AC50/60Hz AC-5 Control of electromagnetic loads (> 7VA) 0A 7A 5A A A perational Current DC- Control of resistive loads and solid state loads 0A 5A.A.A DC DC- Control of electromagnets 5A A.A 0.6A 67

3 ømm - TW Series Function B: Momentary : Maintained K: n/ff Lock Bezel Shape Blank: ctagonal F: Full Shroud G: Mushroom Shroud Q: Square To be used for interpreting part numbers only, not for part number development. Non-Illuminated Pushbuttons (Assembled) Assembled Pushbuttons A B ( ) W 0 B Button Color B: Black G: Green W: White : ed S: Blue Y: Yellow Contact Arrangement 0: N 0: NC 0: N 0: : N-NC : N- Button Shape : Flush : Extended : Mushroom Head Ø 9mm : Mushroom Head Ø 0mm Series Designation W: TW Series Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 67

4 ømm - TW Series Signaling Lights elays & Sockets Non-Illuminated Pushbuttons Flush Extended ecessed Extended with Full Shroud Non-Illuminated Pushbuttons (Assembled) continued Contacts Momentary Action Maintained Action N NC N-NC N N NC N-NC N N NC N-NC N N NC N-NC N ABW0- ABW0- ABW- ABW0- ABW0- ABW0- ABW0- ABW- ABW0- ABW0- ABFW0- ABFW0- ABFW- ABFW0- ABFW0- ABFW0- ABFW0- ABFW- ABFW0- ABFW0- AW0- AW0- AW- AW0- AW0- AW0- AW0- AW- AW0- AW0- AFW0- AFW0- AFW- AFW0- AFW0- AFW0- AFW0- AFW- AFW0- AFW0- Button Color Codes Color Black Green ed Blue Yellow White Code B G S Y W Timers Ø 9mm Mushroom Head Ø 0mm Mushroom Head N NC N-NC N N NC N-NC N ABW0- ABW0- ABW- ABW0- ABW0- ABW0- ABW0- ABW- ABW0- ABW0- AW0- AW0- AW- AW0- AW0- AW0- AW0- AW- AW0- AW0- Contactors Ø 0mm Mushroom Head with Full Shroud Square Flush N NC N-NC N N NC N-NC N ABGW0- ABGW0- ABGW- ABGW0- ABGW0- ABQW0- ABQW0- ABQW- ABQW0- ABQW0- AGW0- AGW0- AGW- AGW0- AGW0- AQW0- AQW0- AQW- AQW0- AQW0- Terminal Blocks Square Extended N NC N-NC N ABQW0- ABQW0- ABQW- ABQW0- ABQW0- AQW0- AQW0- AQW- AQW0- AQW0- Circuit Breakers lock Push n/ ff N NC N-NC N. In place of, specify the Button Color Code from table.. For sub-assembled part numbers, see next page.. For accessories, see page 70.. For dimensions, see page ed switches are supplied with two keys. All units are keyed alike. AKW0 AKW0 AKW AKW0 AKW0 67

5 ømm - TW Series perators ound Flush/Extended ound with Full Shroud/ ecessed Ø 0mm, Ø 9mm Mushroom Head Ø 0mm Mushroom Head with Full Shroud Square Flush/Extended lock Push n/ff Non-Illuminated Pushbuttons (Sub-Assembled) Contact Blocks + perator + Button = Complete Part Momentary ABW-00 ABFW-00 ABW-00 ABGW-00 ABQW-00 Maintained AW-00 AFW-00 AW-00 AGW-00 AQW-00 AKW-00 Buttons ound Flush ound Extended Ø 9mm Mushroom Ø 0mm Mushroom Square Flush Square Extended ABWB- ABWB- ABWB- ABWB- ABQWB- ABQWB- In place of specify the button color code from table Contact Blocks Finger-Safe Spring-Up Contact Blocks Dummy Block N HW-U0 HW-U0 (early make) HW-DB NC HW-U0 HW-U0 (late break). Dummy blocks (no contacts) are used with an odd number of contact blocks.. Use of early and late break contacts creates a make before break function Button Color Codes Color Black Green ed Blue Yellow White Code B G S Y W Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 675

6 ømm - TW Series Stop Switches (Assembled) Signaling Lights To be used for interpreting part numbers only, not for part number development. elays & Sockets Assembled Stop Switches A V (L) W (B) (99) (D) (V) Circuit Breakers Terminal Blocks Contactors Timers Function V: Pushlock Turn eset Y: Push-Pull : Pushlock eset Illumination Blank: None L: Illuminated Series Designation W: TW Series Button/Lens Size : 9mm Mushroom : 0mm Mushroom Lens Type (illuminated units only) Blank: Standard (ribbed) B: Engravable (smooth with insert) Illuminated Circuit (illuminated unit only) 99: Full Voltage (LED determines voltage) 6: 0V AC Step Down 6: 0V AC Step Down 86: 80V AC Step Down Lamp Voltage (full voltage illuminated units only) 6V: 6V AC/DC V: V AC/DC V: V AC/DC 0V: 0V AC 0V: 0V AC Button/Lens Color A: Amber : ed W: White G: Green S: Blue Y: Yellow B: Black Lamp Type (illuminated units only) D: LED Contact Arrangement 0: N 0: NC 0: N 0: : N/NC : N/ 676

7 ømm - TW Series Non-Illuminated Stop Switches Ø 0mm Pushlock Turn eset* Ø 9mm Pushlock Turn eset* Ø 0mm Push-Pull Ø 0mm Pushlock eset * Stop Switches (Assembled), continued Contacts. *Available in ed only.. In place of, specify the Button Color Code from table.. For sub-assembled part numbers, see next page.. For accessories, see page For dimensions, see page 705. Illuminated Stop Switches Ø 0mm Pushlock Turn eset Type Ø 9mm Pushlock Turn eset Ø 0mm Push-Pull N NC N-NC N N NC N-NC N N NC N-NC N N NC N-NC N AVW0-* AVW0-* AVW-* AVW0-* AVW0-* AVW0-* AVW0-* AVW-* AVW0-* AVW0-* AYW0- AYW0- AYW- AYW0- AYW0- AW0- * AW0- * AW- * AW0- * AW0- * Type Contacts Full Voltage Full Voltage Full Voltage. *Available in red only.. In place of, specify the Lens Color Code (see table above).. In place of, specify the Full Voltage Code (lamp voltage) (see table above).. In place of, specify the Voltage Code (see table above). 5. For sub-assembly part numbers, see next page. 6. For accessories, see page For dimensions, see page 705. N-NC N N-NC N N-NC N N-NC N N-NC N N-NC N AVLW D-* AVLW 0D-* AVLW 0D-* AVLW99D-*- AVLW990D-*- AVLW990D-*- AVLW D-* AVLW 0D-* AVLW 0D-* AVLW99D-*- AVLW990D-*- AVLW990D-*- AYLW D- AYLW 0D- AYLW 0D- AYLW99D- - AYLW990D- - AYLW990D- - Button Color Codes Color Black Green ed Blue White Yellow Code B G S W LED/Lens Color Codes Color Amber Green ed Blue White Y Code A G S W Full Voltage Codes Voltage 6V AC/DC V AC/DC V AC/DC 0V AC 0V AC Code 6V V V 0V 0V Voltage Codes Voltage 0VAC 0VAC 80VAC Code s step down to 6V. Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 677

8 ømm - TW Series / Adaptor* Stop Switches (Sub-Assembled) + Contacts + Lamp Holder + perator + Lamp + Button or Lens = Complete Part Signaling Lights *Not applicable for full voltage units perators Ø 9/Ø 0mm Pushlock Turn eset Non-Illuminated Illuminated Buttons Ø 0mm Pushlock Turn eset AVWB-* Lamps LED Voltage 6V AC/DC V AC/DC V AC/DC LSTD-6 LSTD- LSTD- elays & Sockets Ø 0mm Push-Pull AVW-00 AVLW-0600 Ø 9mm Pushlock Turn eset AVWB-* 0V AC 0V AC LSTD-H LSTD-M. In place of, specify the LED color code.. The LED contains a current-limiting resistor and a protection diode. AYW-00 AYLW-0600 Button Color Codes Color Code Timers Ø 0mm Pushlock eset AW-00 Ø 0mm Push-Pull AYWB- Black Green ed Blue White B G S W Ø 0mm Pushlock eset Yellow Y Contactors AWB-*. *Available in ed only. In place of, specify the button color code from table. LED/Lens Color Codes Color Code Amber A Green G ed Blue S White W Circuit Breakers Terminal Blocks 678

9 ømm - TW Series Lenses Ø 9mm Head Pushlock Turn eset Ø 0mm Head Pushlock Turn eset Ø 0mm Head Push Pull Illuminated Stop Switches (Sub-Assembled) continued Standard AVLWLU-* AVLWLU-* AYLWLU- Engravable AVLWBLU-* AVLWBLU-* AYLWBLU-. In place of, specify the lens color code from table on previous page.. *Available only in red. Standard lenses have ribbed pattern, Engravable lenses are smooth and include an engravable insert. Lamp Circuit Components Short Lamp Holder Long Lamp Holder Lead Holder Application Used with full voltage adaptor. Always installed directly to operator. Used with Full-size and two contact blocks Used with TW-LH holder when using four contact blocks and transformer TW-LH TW-LH HW-LH s/full Voltage Modules Full Size Full voltage model (mounted to operator on first deck) Description All s step down to 6V (use 6V LED). Contact Blocks Finger-Safe Spring-Up Dummy Block Spring-up Terminals N HW-U0 HW-U0 (early make) Finger-Safe HW-DB 0V AC 0V AC 80V AC NC HW-U0 HW-U0 (late break). Dummy blocks (no contacts) are used with an odd number of contact blocks.. Use of early and late break contacts creates a make before break function HW-T6 HW-T6 HW-L86 HW-GAN Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 679

10 ømm - TW Series Pilot Lights (Assembled) elays & Sockets Timers Signaling Lights Assembled Pilot Lights A P (Q) W (B) (99) (D) (V) Contactors Terminal Blocks Function P: Pilot Light Bezel Shape Blank: ctagonal (round lenses) Q: Square Series Designation W: TW Series Lens Shape : Flat : Dome Lens Type Blank: Standard (ribbed) B: Engravable (smooth with insert included) Illumination Circuit 99: Full Voltage (lamp determines voltage) 6: 0V AC Step Down 6: 0V AC Step Down 86: 80V AC Step Down Lamp Voltage (Full Voltage Units nly) 6V: 6V AC/DC V: V AC/DC V: V AC/DC 0V: 0V AC 0V: 0V AC Lens Color Code A: Amber G: Green : ed S: Blue W: White Y: Yellow Lamp D: LED Circuit Breakers. Use only when interpreting part numbers. Do not use for developing part numbers.. All transformers step down to 6V

11 ømm - TW Series Assembled Pilot Lights ound Flat Dome Square Flat Pilot Lights (Assembled) continued Type Voltage. In place of, specify the Lens Color Code from table below.. In place of, specify the Full Voltage Code from table below.. For accessories, see page 70.. For dimensions, see page For sub-assembly part numbers, see next page. 6. Yellow pilot light comes with white LED. 0VAC 0VAC 80VAC APW6D- APW6D- APW86D- Full Voltage APW99D- - 0VAC 0VAC 80VAC APW6D- APW6D- APW86D- Full Voltage APW99D- - 0VAC 0VAC 80VAC APQWB6D- APQWB6D- APQWB86D- Full Voltage APQWB99D- - Lens Color Codes Color Code Amber A Green G ed Blue S White W Yellow Y Full Voltage Codes Voltage Code 6V AC/DC 6V V AC/DC V V AC/DC V 0V AC 0V 0V AC 0V Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 68

12 ømm - TW Series Pilot Lights (Sub-Assembled) + perator + Lamp + Lens = Complete Part Signaling Lights elays & Sockets perators ound Dome/Flat Square * not required for full voltage units. APW-99 UPQW-99 Lamps LED Voltage 6V AC/DC V AC/DC V AC/DC 0V AC 0V AC LSTD-6 LSTD- LSTD- LSTD-H LSTD-M. In place of, specify the LED color code.. The LED contains a current-limiting resistor and a protection diode.. Yellow LED not available. Use white LED. s LED/Lens Color Codes Color Amber Green ed Blue White Yellow Description Code A G S PW Y If clear lens is desired, use white marking lens and remove engraving insert Timers Same operator is used for full voltage as for transformer completed units. 0V AC HW-T6 Lenses Finger-Safe 0V AC HW-T6 Standard Engravable 80V AC HW-T86 Dome All s step down to 6V (use 6V LED). Contactors APWLU- ound Flat APWLU- APWBLU- Terminal Blocks Square Flat APQWBLU- Circuit Breakers. In place of, specify the Lens Color Code from table.. Standard lenses have a ribbed lens to enhance light dispersion. Marking lenses are smooth and include an engravable insert. 68

13 ømm - TW Series Function L: Momentary Action L: Maintained Action Bezel Shape Blank: ctagonal (round lenses) F: Full Shroud (round lenses) Q: Square Series Designation W: TW series Lens Shape/Size : Standard Extended (round or square) : 9mm Mushroom : 0mm Mushroom Lens Type Blank: Standard (ribbed) B: Engravable (smooth with insert) Illumination Circuit 99: Full Voltage (lamp determines voltage) 6: 0V AC Step Down 6: 0V AC Step Down 86: 80V AC Step Down. Use only when interpreting part numbers. Do not use for developing part numbers.. s step down to 6V. Illuminated Pushbuttons (Assembled) Assembled Illuminated Pushbuttons A L (F) W (B) 99 (D) (V) Lamp Voltage (Full Voltage Units nly) 6V: 6V AC/DC V: V AC/DC V: V AC/DC 0V: 0V AC 0V: 0V AC Lens Code A: Amber G: Green : ed S: Blue W: White Y: Yellow Lamp Type D: LED Lamp Contact Arrangement 0: N 0: NC 0: N 0: : N-NC : N- Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 68

14 ømm - TW Series Illuminated Pushbuttons Extended Lens Contacts N-NC N Illuminated Pushbuttons (Assembled) Momentary ALW D- ALW 0D- ALW 0D- Maintained ALW D- ALW 0D- ALW 0D- LED/Lens Color Codes Color Amber Green ed Blue Code A G S Signaling Lights Full Voltage N-NC N ALW99D- - ALW990D- - ALW990D- - ALW99D- - ALW990D- - ALW990D- - White Yellow W Y. Mushroom lenses not available in yellow.. Yellow pushbutton comes with white LED. elays & Sockets Extended Lens with Full Shroud Full Voltage N-NC N N-NC N ALFW D- ALFW 0D- ALFW 0D- ALFW99D- - ALFW990D- - ALFW990D- - ALFW D- ALFW 0D- ALFW 0D- ALFW99D- - ALFW990D- - ALFW990D- - Full Voltage Codes Voltage 6V AC/DC V AC/DC V AC/DC 0V AC Code 6V V V 0V ø9mm Mushroom Button N-NC N ALW D- ALW 0D- ALW 0D- ALW D- ALW 0D- ALW 0D- 0V AC 0V Voltage Codes Voltage Code Timers ø0mm Mushroom Button Full Voltage N-NC N N-NC N ALW99D- - ALW990D- - ALW990D- - ALW D- ALW 0D- ALW 0D- ALW99D- - ALW990D- - ALW990D- - ALW D- ALW 0D- ALW 0D- 0VAC 6 0VAC 6 80VAC 86 s step down to 6V (use 6V LED). Contactors Full Voltage N-NC N ALW99D- - ALW990D- - ALW990D- - ALW99D- - ALW990D- - ALW990D- - Terminal Blocks Square Extended Full Voltage N-NC N N-NC N ALQWB D- ALQWB 0D- ALQWB 0D- ALQWB99D- - ALQWB990D- - ALQWB990D- - ALQWB D- ALQWB 0D- ALQWB 0D- ALQWB99D- - ALQWB990D- - ALQWB990D- - Circuit Breakers. In place of, specify the Lens Color Code (see table). Mushroom lenses not available in yellow.. In place of, specify the Full Voltage Code (lamp voltage) (see table).. In place of, specify the Voltage Code (see table).. For sub-assembly part numbers, see next page. 5. For accessories, see page For dimensions, see page Light is independent of switch position. 8. Yellow pushbutton comes with white LED. 68

15 ømm - TW Series / Adaptor* *Not applicable for full voltage units perators Illuminated Pushbuttons (Sub-Assembled) + Contacts + Lamp Holder + perator + Lamp + Lens = Complete Part Momentary Maintained Extended ALW-0600 ALW-0600 Extended with Full Shroud ø9mm/ø0mm Mushroom ALFW-0600 ALW-0600 ALFW-0600 ALW-0600 Square/Extended ALQW-B0600 ALQW-B0600 Lenses Standard Engravable ound Extended ALWLU- ALWBLU- ø 9mm Mushroom Head* ø 0mm Mushroom Head* ALWLU- ALWLU- ALWBLU- ALWBLU- Square Extended ALQWBLU-. In place of, specify the lens color code from table on the bottom right.. *Mushroom lens not available in yellow.. Standard lenses have ribbed pattern, Engravable lenses are smooth and include an engravable insert. Lamps LED Voltage 6V AC/DC V AC/DC V AC/DC 0V AC 0V AC LSTD-6 LSTD- LSTD- LSTD-H LSTD-M. In place of, specify the LED color code.. The LED contains a current-limiting resistor and a protection diode. Lamp Circuit Components Short Lamp Holder Long Lamp Holder Lead Holder Application LED/Lens Color Codes Used with full voltage adaptor. Always mounted directly to operator. Used with Full-size and two contact blocks Color Code Color Code Amber A Blue S Green G White PW ed Yellow Y Yellow LED not available. Use white LED. Used with TW-LH holder when using four contact blocks and transformer TW-LH TW-LH HW-LH Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 685

16 ømm - TW Series Contact Blocks Finger-Safe Spring-Up N HW-U0 HW-U0 (early make) Illuminated Pushbuttons (Sub-Assembled) continued NC HW-U0 HW-U0 (late break) s/full Voltage Modules Full Size Description Spring-Up Terminals 0V AC 0V AC 80V AC HW-T6 HW-T6 HW-T86 Signaling Lights Dummy Block HW-DB Full voltage model (to be mounted to operator on the first deck) Spring-Up Terminals HW-GAN elays & Sockets. Dummy blocks (no contacts) are used with an odd number of contact blocks.. Use of early and late break contacts creates a make before break function All s step down to 6V (use 6V LED). Circuit Breakers Terminal Blocks Contactors Timers 686

17 ømm - TW Series Function S: Selector Switch Series Designation W: TW Series Number of Positions : -Position : -Position : -Position 5: 5-Position Spring eturn Action Blank: Maintained : Spring return from ight ( or position) : Spring return from Left ( or position) : -Way spring return from Left and ight ( position only). Use only when interpreting part numbers. Do not use for developing part numbers.. Custom contact configurations available.. Custom key removable codes available.. Portions of part number inside ( ) are optional. Non-Illuminated Selector Switches (Assembled) Assembled Selector Switches A S W () (L) 0 0 Circuit Number (Standard circuits shown on following pages and 695.) Contact Arrangement Code 0: N 0: NC 0: N 0: 0: N 0: NC : N-NC : N- perator Code Blank: Knob perator L: Lever perator K: perator Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 687

18 ømm - TW Series -Position Selector Switches Contact Mounting perator Position L Non-Illuminated Selector Switches (Assembled) continued Maintained Spring eturn from ight Spring eturn from Left L L L Signaling Lights N NC Knob Lever Knob Lever ASW0 ASWL0 ASWK0 ASW0-6 ASWL0-6 ASWK0-6 ASW0 ASWL0 ASWK0 ASW0-6 ASWL0-6 ASWK0-6 ASW0 ASWL0 ASWK0 ASW0-6 ASWL0-6 ASWK0-6 N NC Knob Lever ASW ASWL ASWK ASW ASWL ASWK ASW ASWL ASWK elays & Sockets N Knob Lever Knob Lever ASW0 ASWL0 ASWK0 ASW0-0 ASWL0-0 ASWK0-0 ASW0 ASWL0 ASWK0 ASW0-0 ASWL0-0 ASWK0-0 ASW0 ASWL0 ASWK0 ASW0-0 ASWL0-0 ASWK0-0 N Knob Lever ASW ASWL ASWK ASW ASWL ASWK ASW ASWL ASWK Timers N Knob Lever ASW- ASWL- ASWK- Circuit Breakers Terminal Blocks Contactors ASW- ASWL- ASWK- ASW- ASWL- ASWK

19 ømm - TW Series -Position Selector Switches Contact N N N N N NC Mounting Non-Illuminated Selector Switches (Assembled) continued perator Position Maintained Spring eturn from ight Spring eturn from Left Spring eturn Two-Way L C Knob Lever Knob Lever Knob Lever Knob Lever Knob Lever Knob Lever Knob Lever L ASW0 ASWL0 ASWK0 ASW0 ASWL0 ASWK0 ASW ASWL ASWK C ASW-09 ASWL-09 ASWK-09 ASW-0 ASWL-0 ASWK-0 ASW0 ASWL0 ASWK0 ASW0 ASWL0 ASWK0 L ASW0 ASWL0 ASWK0 ASW0 ASWL0 ASWK0 ASW ASWL ASWK C ASW-09 ASWL-09 ASWK-09 ASW-0 ASWL-0 ASWK-0 ASW0 ASWL0 ASWK0 ASW0 ASWL0 ASWK0. The truth table indicates the operating position of contact block when the operator is switched to that position. = n (closed contacts) = ff (open contacts) = verlapping Contacts: emain on (closed contacts) when switch is moved between these two positions.. All knob and lever selector switches come in black. ther colors are available by ordering the knob or lever separately.. Every key selector switch uses an identical key. The key is removable in any maintained position.. Custom contact configurations are available, see page Position Selector Switch Contact N Mounting perator Position Knob Lever Maintained ASW- ASWL- L ASW0 ASWL0 ASWK0 ASW0 ASWL0 ASWK0 ASW ASWL ASWK C ASW-09 ASWL-09 ASWK-09 ASW-0 ASWL-0 ASWK-0 ASW0 ASWL0 ASWK0 ASW0 ASWL0 ASWK0 5-Position Selector Switch Contact N Mounting perator Position 5 L ASW0 ASWL0 ASWK0 ASW0 ASWL0 ASWK0 ASW ASWL ASWK C ASW-09 ASWL-09 ASWK-09 ASW-0 ASWL-0 ASWK-0 ASW0 ASWL0 ASWK0 ASW0 ASWL0 ASWK0 Knob Lever Maintained 5 ASW5-50 ASW5L-50 Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 689

20 ømm - TW Series Non-Illuminated Selector Switches (Sub-Assembled) Contact Blocks + perator + Knob or Lever* + Color Insert* = Complete Part. *Not needed with key type switches.. Knob type shown. Signaling Lights perators Positions Description Maintained Spring return from right Spring return from left ASW00 ASW00 ASW00 Handles and Inserts Knob ASWHHY- elays & Sockets Knob/Lever Maintained, Cam Maintained, Cam Maintained, Cam Spring return from right, Cam Spring return from right, Cam Spring return from left, Cam Spring return from left, Cam ASW00- ASW00- ASW00- ASW00- ASW00- ASW00- ASW00- Lever ASWHHL- Spring return from left/right, Cam Spring return from left/right, Cam ASW00- ASW00- Timers 5 Maintained, Standard Cam Maintained, Cam Maintained, Standard cam Maintained, Cam Maintained ASW00 ASW00- ASW500 ASW500- ASWK00 Color Insert TW-HC- Contactors Spring return from right Spring return from left Maintained, Cam Maintained, Cam Maintained, Cam Spring return from right, Cam Spring return from right, Cam Spring return from left, Cam Spring return from left, Cam ASWK00 ASWK00 ASWK00- ASWK00- ASWK00- ASWK00- ASWK00- ASWK00- ASWK00- Contact Blocks Finger-Safe Spring- Up Terminals N HW-U0 HW-U0 (early make) NC HW-U0 HW-U0 (late break) Spring return from left/right, Cam Spring return from left/right, Cam ASWK00- ASWK00- Dummy Block Terminal Blocks Circuit Breakers. Two keys are supplied with every key switch, all are keyed alike, and removable from any maintained position.. Locking rings are included with all operators. rder knobs, levers, and color inserts separately.. Different cams produce different contact actions. For details, see page switch operator supplied with black sleeve. Handle/Insert Color Codes Color Black* Blue Green ed Yellow White Code B S G Y W *Color inserts not available in black. Knob and lever not available in white. eplacement Parts Switch Black Sleeve AKWB-B HW-DB. Push rod color code: Green = N contact block ed = NC contact block.. Dummy blocks (no contacts) are used with an odd number of contact blocks

21 ømm - TW Series Function SL: Illuminated Selector Switch Series Designation W: TW series Number of Positions : -Position : -Position Spring eturn Action Blank: Maintained : Spring return from ight : Spring return from Left : Two-Way spring return from Left and ight Illumination Circuit 99: Full Voltage (lamp determines voltage) 6: 0V AC Step Down 6: 0V AC Step Down 86: 80V AC Step Down. Use only when interpreting part numbers. Do not use for developing part numbers.. All transformers step down to 6V (use 6V lamp). Illuminated Selector Switches (Assembled) Assembled Illuminated Selector Switches A SL W () 99 (D) (0) (V) Lamp Voltage (Full Voltage Units nly) 6V: 6V AC/DC V: V AC/DC V: V AC/DC 0V: 0V AC 0V: 0V AC Lens Color Code A: Amber G: Green : ed S: Blue W: White Y: Yellow Contact Circuit Number Standard circuits are listed on the following pages and 695. Lamp Type D: LED Lamp Contact Arrangement 0: N 0: NC 0: N 0: 0: N 0: NC : N-NC : N- Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 69

22 ømm - TW Series Illuminated -Position Selector Switches Contact Mounting perator Position L Lamp Circuit Type Illuminated Selector Switches(Assembled) continued Maintained Spring eturn from ight Spring eturn from Left L L L Voltage Codes Voltage Code 0VAC 6 0VAC 6 80VAC 86 Signaling Lights elays & Sockets N NC N N Full Voltage Full Voltage Full Voltage Full Voltage ASLW D- ASLW99D- - ASLW 0D- ASLW990D- - ASLW 0D-0- ASLW990D-0- - ASLW D- ASLW99D- - ASLW D- ASLW99D- - ASLW 0D- ASLW990D- - ASLW 0D-0- ASLW990D-0- - ASLW D- ASLW99D- - Illuminated -Position Selector Switches, Maintained and Spring eturn from ight Contact Mounting perator Position L C Lamp Circuit Type ASLW D- ASLW99D- - ASLW 0D- ASLW990D- - ASLW 0D-0- ASLW990D-0- - ASLW D- ASLW99D- - Maintained Spring eturn From ight Spring eturn from Left Spring eturn Two-Way L C L C L C s step down to 6V (use 6V LED). LED/Lens Color Codes Color Amber Green ed Blue White Yellow L Code A G S W Y C N Full Voltage ASLW 0D- ASLW990D- - ASLW 0D- ASLW990D- - ASLW 0D- ASLW990D- - ASLW 0D- ASLW990D- - Timers N Full Voltage Full Voltage ASLW 0D- ASLW990D- - ASLW D- ASLW99D- - ASLW 0D- ASLW990D- - ASLW D- ASLW99D- - ASLW 0D- ASLW990D- - ASLW D- ASLW99D- - ASLW 0D- ASLW990D- - ASLW D- ASLW99D- - Contactors N N Full Voltage Full Voltage ASLW D-09- ASLW99D ASLW D-0- ASLW99D-0- - ASLW D-09- ASLW99D ASLW D-0- ASLW99D-0- - ASLW D-09- ASLW99D ASLW D-0- ASLW99D-0- - ASLW D-09- ASLW99D ASLW D-0- ASLW99D-0- - Terminal Blocks N NC Full Voltage Full Voltage ASLW 0D- ASLW990D- - ASLW 0D- ASLW990D- - ASLW 0D- ASLW990D- - ASLW 0D- ASLW990D- - ASLW 0D- ASLW990D- - ASLW 0D- ASLW990D- - ASLW 0D- ASLW990D- - ASLW 0D- ASLW990D- - Circuit Breakers. In place of, specify the Voltage Code.. In place of, specify the Lens/LED Color Code.. In place of, specify the Full Voltage Code.. For custom contact configurations, see page Light is independent of switch position. 6. Yellow selector switch comes with white LED. Full Voltage Codes Voltage 6V AC/DC V AC/DC V AC/DC 0V AC 0V AC Code 6V V V 0V 0V 69

23 ømm - TW Series Illuminated Selector Switches (Sub-Assembled) * + Contact Block + perator + Lamp/Lead Holder + LED + Lens = Complete Part *Full voltage units use a full voltage adaptor (HW-GAN) instead of a transformer. Lamp holder is not included with operators, order separately. perators Positions Description Maintained Spring return from right Spring return from left Maintained, cam Maintained, cam Maintained, cam Spring return from right, cam Spring return from right, cam Spring return from left, cam Spring return from left, cam Spring return from left/right, cam Spring return from left/right, cam Different cams produce different contact action. For details, see Contact Arrangements on page 695. Lenses (Knobs) Knob In place of, specify the lens color code from table. ASLWLU- ASLW00 ASLW00 ASLW00 ASLW00- ASLW00- ASLW00- ASLW00- ASLW00- ASLW00- ASLW00- ASLW00- ASLW00- Lamps LED Voltage 6V AC/DC V AC/DC V AC/DC 0V AC 0V AC LSTD-6 LSTD- LSTD- LSTD-H LSTD-M. In place of, specify the LED color code.. The LED contains a current-limiting resistor and a protection diode. LED/Lens Color Codes Color Amber Green ed Blue White Yellow Code A G S W Y Yellow LED not available. Use white LED Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 69

24 ømm - TW Series Contact Blocks Finger-Safe Spring-Up Illuminated Selector Switches (Sub-Assembled) continued s/full Voltage Modules Description N NC 0V AC HW-T6 HW-U0 HW-U0 Full Size HW-U0 (early make) HW-U0 (late break) Spring-Up 0V AC HW-T6 Signaling Lights Dummy Block HW-DB. Dummy blocks (no contacts) are used with an odd number of contact blocks.. Use of early and late break contacts creates a make before break function Full voltage model (to be mounted directly to the operator on the first deck) Spring-Up 80V AC HW-L86 HW-GAN elays & Sockets Lamp Circuit Components Short Lamp Holder Application All s step down to 6V (use 6V lamp). Used with full voltage adaptor TW-LH Timers Long Lamp Holder Used with Full-size and two contact blocks TW-LH Contactors Lead Holder Used with TW-LH holder when using four contact blocks and full size transformer HW-LH Circuit Breakers Terminal Blocks 69

25 ømm - TW Series How to ead Contact Arrangement Charts Contact Arrangement Charts To determine contact block mounting position, first make sure the selector switch is oriented as shown on the right Contact Arrangement Type and quantity of switch contacts Circuit Number * N/D = No designation required Contact Block Mounting Position Contact Arrangement Chart: -Position Selector Switches Contact N Circuit Number N/D NC 6 N NC N-EM NC-LB N N/D N/D 0 N N/D Mounting Position perator Position L Position or mounting contact blocks on operator. Note: for illuminated selectors, full voltage adaptor is always mounted in position # Contact Block Description HW-U0 Knob/Lever HW-DB Illuminated Knob HW-U0 Knob/Lever HW-DB Illuminated Knob HW-U0 Knob/Lever HW-U0 Illuminated Knob HW-U0 Knob/Lever HW-U0 Illuminated Knob HW-U0 Knob/Lever HW-U0 Illuminated Knob HW-U0 Knob/Lever HW-U0 Illuminated Knob HW-U0 Knob/Lever HW-U0 Illuminated Knob HW-U0 Knob/Lever HW-U0 Illuminated Knob HW-U0 HW-U0 HW-U0 HW-U0 HW-U0 HW-U0 HW-U0 HW-U0 Knob/Lever Illuminated Knob Knob/Lever Illuminated Knob. N-EM, NC-LB = Early Make, Late Break. N/D = No circuit number designation required in assembled selector switch part number.. = n (closed contacts) = ff (pen contacts) perator Position Truth table indicates the operating position of contact block when operator is switched to that position ( - closed, - open). Maintained L L ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 perator Spring et. from t. ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 L Spring et. from Lt. L ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 ASW00 ASWK00 ASLW00 Contact Block Part number to use when ordering sub-assembly contact blocks, as required for use with corresponding mounting position Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 695

26 ømm - TW Series Contact Arrangement Chart: -Position Selector Switches Contact Circuit Number Mounting Position perator Position L C Contact Block Description Maintained C L perator Spring eturn from ight L C Spring eturn from Left L C Two-Way C L Circuit Breakers Terminal Blocks Contactors Timers elays & Sockets Signaling Lights N NC N N N/D 0 0 N/D N/D HW-U0 Knob/Lever HW-U0 Illuminated Knob 0 HW-U0 Knob/Lever 0 HW-U0 Illuminated Knob 0 HW-U0 Knob/Lever HW-U0 Illuminated Knob 0 HW-U0 Knob/Lever 0 HW-U0 Illuminated Knob 0 0 HW-U0 Knob/Lever 0 HW-U0 Illuminated Knob 0 HW-U0 Knob/Lever 0 HW-U0 Illuminated Knob 0 HW-U0 Knob/Lever HW-U0 Illuminated Knob 0 HW-U0 Knob/Lever HW-U0 Illuminated Knob 0 0 HW-U0 0 0 HW-U0 0 HW-U0 0 HW-U0 0 HW-U0 0 0 HW-U0 0 HW-U0 0 0 HW-U0 0 HW-U0 0 HW-U0 0 HW-U0 HW-U0 0 HW-U0 0 HW-U0 0 HW-U0 0 HW-U0 0 HW-U0 0 HW-U0 0 HW-U0 0 0 HW-U0 Knob/Lever Illuminated Knob Knob/Lever Illuminated Knob Knob/Lever Illuminated Knob Knob/Lever Illuminated Knob Knob/Lever Illuminated Knob ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00-. Each operator sub-assembly is available as a - and a - for -position selector switches. The internal cam of a - is different from that of a -. This results in designated combinations of open and closed contacts in the various operator positions.. N/D = No circuit number designation required in assembled part number.. = n (closed contacts) = ff (open contacts). - verlapping contacts remain on (closed) when switch is moved between these two positions

27 ømm - TW Series Contact Arrangement Chart: -Position Selector Switches Contact N NC Circuit Number N/D 05 N/D Mounting Position perator Position L C Contact Block 0 0 HW-U0 0 0 HW-U0 0 0 HW-U0 0 0 HW-U0 0 HW-U0 0 0 HW-U0 0 HW-U0 0 0 HW-U0 0 HW-U0 0 HW-U0 0 HW-U0 HW-U0 0 HW-U0 0 HW-U0 0 HW-U0 0 HW-U0 Description Knob/Lever Illuminated Knob Knob/Lever Illuminated Knob Knob/Lever Illuminated Knob Knob/Lever Illuminated Knob Maintained L C ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- perator Spring eturn from ight L C ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- Spring eturn from Left L C ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- Two-Way L C ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00-. Each operator sub-assembly is available as a - and a - for -position selector switches. The internal cam of a - is different from that of a -. This results in designated combinations of open and closed contacts in the various operator positions.. N/D = No circuit number designation required in assembled part number.. = n (closed contacts) = ff (open contacts). - verlapping contacts remain on (closed) when switch is moved between these two positions. Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 697

28 ømm - TW Series To build a custom selector switch, follow these steps. Step How many positions of the switch are needed? # of positions (,,, 5) Custom Selector Switch Building Guide Mounting Positions L Signaling Lights Step How many contacts should there be? # of isolated contacts (maximum 6) elays & Sockets Timers Step Fill in the Truth Table ( = closed, 0 = open) Knob Position 5 Contacts 5 6 Contactors Step Terminal Blocks Circuit Breakers If building a position selector, skip this step. ( position selectors have only one cam) If building a,, or 5 position selector, determine appropriate cam as follows: Look at ow from above table and locate an identical row in the operator truth tables (See next page). epeat for all rows. The user must find one operator that contains all rows from above table. ecord the operator cam version. Step 5 Build by placing appropriate contact in appropriate mounting position for each desired row on operator cam truth table. L and refer to mounting on left or right side of operator as viewed from the front of the panel. Step 6 Develop an assembly part number (if necessary) as follows: follow standard numbering nomenclature for selector switches (see pages 687 or 69. In place of the Circuit Number indicate the cam number and contact arrangement as such ASW--ELCSS, where is the cam number, and contact arrangement ELC calls out individual contact mounting locations in order (see diagram above). =N, C=NC, E=N-EM, L=NC-LB, = no contact. Part number must designate all 6 possible mounting locations. Caution: Before putting any custom selector switch into use, the user should use an ohmmeter to test for desired performance.. For perator Truth Tables, see next page

29 ømm - TW Series Use the following tables to build custom selector switches. Position Selector Switches ASW00 ASLW00 ASWK00 Contact HW-U0 (N) HW-U0 (NC) HW-U0 (N-EM) HW-U0 (NC-LB) Mounting Position Position Selector Switches ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- ASW00- ASWK00- ASLW00- Contact HW-U0 (N) HW-U0 (NC) HW-U0 (N-EM) HW-U0 (NC-LB) Contact HW-U0 (N) HW-U0 (NC) HW-U0 (N-EM) HW-U0 (NC-LB) Contact HW-U0 (N) HW-U0 (NC) HW-U0 (N-EM) HW-U0 (NC-LB) perator Position Left ight L L L L Mounting Position perator Position Left Center ight L L L L Mounting Position perator Position Left Center ight L L L L Mounting Position perator Position Left Center ight L L L L perator Truth Tables Position Selector Switches ASW00 ASW00- Contact HW-U0 (N) HW-U0 (NC) HW-U0 (N-EM) HW-U0 (NC-LB) Contact HW-U0 (N) HW-U0 (NC) HW-U0 (N-EM) HW-U0 (NC-LB) Mounting Position perator Position L L L L Mounting Position 5 Position Selector Switches ASW500 ASW500- Contact HW-U0 (N) HW-U0 (NC) HW-U0 (N-EM) HW-U0 (NC-LB) Contact HW-U0 (N) HW-U0 (NC) HW-U0 (N-EM) HW-U0 (NC-LB) perator Position L L L L Mounting Position perator Position 5 L L L L Mounting Position perator Position 5 L L L L Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 699

30 ømm - TW Series Faceplates Nameplates TW Series NWAL NWAQL NWAS EMEGENCY STP." (9mm).76" (5mm)." (9mm) Contactors Timers elays & Sockets Signaling Lights Nameplate (blank) Nameplate (engraved).0" (5.mm) NWAL-B (black) NWAL- (red) 0.975" (5mm) 0.566" (.5mm) NWAQL-B (black) NWAQL- (red).76" (5mm) NWAS-B ø70mm NWA- NWAL- NWAQL- NWAS- NWA-7. In place of, insert either the Standard Legend Code from table below or custom engraving delimited by.. Standard engravings are available at no charge. NWA-7 comes marked Emergency Stop as shown in drawing. Standard Legend Codes Pushbuttons Pushbuttons/Selector Switches Selector Switches Legend Code Legend Code Legend Code Legend Code Legend Code AUT CLSE DWN EMEG.STP FAST FWAD HAND HIGH IN INCH JG LW LWE FF N PEN UT AISE ESET EVESE UN SLW STAT STP STP TEST UP I (Int l n) (Int l ff) EM AUT-MAN CLSE-PEN DWN-UP FAST-SLW F-EV HAND-AUT HIGH-LW JG-UN LEFT-IGHT LWE-AISE MAN-AUT FF-N N-FF PEN-CLSE AISE-LWE Terminal Blocks Circuit Breakers EV-F UN-JG UN-SAFE SAFE-UN SLW-FAST STAT-STP STP-STAT UP-DWN AUT-MAN-FF AUT-FF-MAN CLSE-FF-PEN DWN-FF-SLW FAST-FF-SLW F-FF-EV LEFT-FF-IGHT LWE-FF-AISE FF-MAN-AUT FF-SLW-FAST FF-- PEN-FF-CLSE SLW-FF-FAST SUMME-FF-WINTE UP-FF-DWN -FF- HAND-FF-AUT To order engraved nameplates, add legend code to nameplate part number. Character height based on the number of characters and size of nameplate. Standard character size is /6.. Nameplates with standard legends are the same list price as blank nameplates. Nameplate rder Form on next page

31 ømm - TW Series Custom Engraved Nameplates rder Form TW Series Copy this order form and use it to specify Letter Height, Custom Engravings, Location of Engraving on Nameplate, and Quantity Desired. To ensure engraving accuracy, fax it to your IDEC representative. or Distributor. Your Company Name: NWAL NWAQL NWAS Your Name: Telephone: Fax & Engraving Location Engraving Location Engraving Location A Engraving Location B Step. Specify Quantity. Enter the number of nameplates desired in the box on the right. Step. Choose Letter Size - 7/6 or /8. Check the box for the letter size you want. Then write your lettering in box below checkboxes. Note: /8 size letters cannot exceed 9 characters. Step. Specify Quantity. Enter the number of nameplates desired in the box on the right. Qty Step. Choose Letter Size - 7/6 or /8. Check the box for the letter size you want. Then write your lettering in box below checkboxes. Note: /8 size letters cannot exceed 9 characters. Step. Specify Quantity. Enter the number of nameplates desired in the box on the right. Qty Qty Step. Choose Letter Size - /8 or /. Check the box for the letter size you want. Then write your lettering in box below checkboxes. Note: /8 size letters cannot exceed characters. Step. Specify Location. Enter the location of engraving (A or B), in the box on the right. 7/6 Letter Size /8 Letter Size IDEC ep/distributor Contact: P number (if known): IDEC ep/distributor Phone: IDEC ep/distributor Fax & characters max (for 7/6 size letters) 9 characters max (for /8 size letters) /6 Letter Size /8 Letter Size / Letter Size /8 Letter Size characters max (for 7/6 size letters) 9 characters max (for /8 size letters) characters max (for / size letters) characters max (for /8 size letters) Sample Letter Sizes 7/6 Letters: /8 Letters: Sample Letter Sizes 7/6 Letters: /8 Letters: Location Sample Letter Sizes / Letters: /8 Letters: Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 70

32 ømm - TW Series Switch Engraving rder Form TW Series Copy this order form and use it to specify Letter Height, Maximum Number of Lines and Text to be engraved. To ensure engraving accuracy, fax it to your IDEC representative or Distributor. Your Company: Telephone: Name: Fax: Signaling Lights Address: P: to be Engraved: elays & Sockets Please check one of the boxes below to indicate your choice of engraving options: # of Lines Letter Height Square Switch Max. Characters Per Line # of Lines Letter Height ound Switch Max. Characters Per Line ø9mm, ø0mm Mushroom Head # of Lines Engraving Engraving Area Area Letter Height Max. Characters Per Line 5/ 6 5/ 5 5/ 5 Engraving Area /8 6 /8 6 /8 5 Timers 5/ 6 5/ 5 5/ 7 Engraving Area /8 5 /8 6 /8 7 /8 6 /8 5 / 5 / 5 Contactors. Above mentioned specifications hold true for standard size pushbuttons (round and square).. Engraving Area can be engraved for 0mm mushroom Head non-illuminated push button only.. Engraving is done on the button itself for non-illuminated push buttons and on marking plate for illuminated push buttons and pilot lights.. Please enter text exactly how you want it engraved, take care to emphasize capital or small letters. Enter text to be engraved: Sample Letter Sizes Terminal Blocks Line : Line : Line : Line : /8 Letters: 5/ Letters: Circuit Breakers For IDEC Internal Use nly: Work rder #: 70

33 ømm - TW Series TW Series Accessories Accessories Item Appearance Description/Usage Lamp emoval Tool ubber tool used to install or remove LED s -55 Contact Block emover Used to remove contact blocks, transformers, lenses, and adaptors. Can also be used to determine panel thickness adjustment. Nut Locking Wrench Used in - locking wrench to tighten locking nuts inside square bezel TW-KQ Metal Bezel Plastic Bezel Boot/Cover Anti-otation ing Chrome plated bezels tighten onto operator (replacement for damaged bezels) Black plastic bezels for square buttons (replacement for damaged bezels) Used to cover and protect pushbuttons Standard octagonal units (chrome-pl.) Full shroud octagonal units (chrome-pl.) Full shroud mushroom head units Ø 0mm ound flush units (black plastic) ound extended units (black plastic) Square units (black plastic) Square units with full shroud (black plastic) Waterproof lens cover for square pilot lights Waterproof lens cover for square illuminated buttons Clear boot for round flush units Clear boot for round extended units *In place of asterisk, specify ubber Boot color: B (black), G (green), (red), Y (yellow) - (nitril rubber) ing to prevent operator base from rotating in the mounting hole. Used when nameplate is not used Mounting Hole Plug Black rubber plug fills unused mounting holes in panel. B- Metallic Mounting Hole Plug For plugging unused mounting holes in the panel. Tighten the attached locking ring to a torque of kfg-cm maximum Degree of protection: IP66 TW-KC AW-8 AW-F8 AW-G AW-PB AW-FPB AW-QB AW-QFB APW00LN APW00L C- C- CW-* GL- LW9Z-BM eplacement s eplacement keys (#0) TW-SK eplacement Black Sleeve for switch AKWB-B Metal Button Guard Used on flush buttons to prevent inadvertent actuation LW-C Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 70

34 ømm - TW Series Item Appearance Description/Usage Terminal Tab Adaptor Quick- connect terminals #50 (7/6 x /6 ) single tab TW-FA Lock-out Adaptor Used to provide lock-out protection for pushbuttons and knob selector switches: Up to Ø 0mm mushroom head size (Padlock not included.) Not applicable for e-stops. HW9Z-KL Signaling Lights mm to 0mm Adaptor Used to mount TW series control unit (except square units) Ø 7/8 (mm) into a Ø -/6 (0mm) panel cut-out. TWN-A8 Circuit Breakers Terminal Blocks Contactors Timers elays & Sockets 70

35 ømm - TW Series Pushbuttons Dimensions Flush Extended Extended with Full Shroud. Locking ing Safety Lever Lock 9. ( or blocks) 69. ( or blocks) Panel Thickness 0.8 to 6 ø ø.6 9. LCK. Locking ing Safety Lever Lock 9. ( or blocks) 69. ( or blocks) Panel Thickness 0.8 to 6 9 ø ø.6 9. LCK. Locking ing Safety Lever Lock 9. ( block) 69. ( or blocks) 89. ( blocks) 9mm Mushroom 0mm Mushroom Mushroom with Full Shroud. Locking ing Safety Lever Lock Panel Thickness 0.8 to 6 9. ( or blocks) 69. ( or blocks). ø LCK. Locking ing Safety Lever Lock 9. ( or blocks) 69. ( or blocks) Panel Thickness 0.8 to 6. ø LCK. Adust ring 9. (- blocks) 69. (- blocks) 9mm Push-Lock-Turn-eset 0mm Push-Lock-Turn-eset lock Push n/ff. Adust ring 9. (- blocks) 69. (- blocks) Panel thickness to 6.5 ø9 eset angle Adjust ring 9. (- blocks) 69. (- blocks) Panel thickness to 6 eset angle 75 0mm Pushlock reset 0mm Push-Pull Square Flush. Adjust ring 9. (- blocks) 69. (- blocks) Square Extended. Locking ing Safety Lever Lock 9. ( or blocks) 69. ( or blocks) Selector Switches. Adust ring 9. (- blocks) 69. (- blocks) Panel thickness to Panel Thickness 0.8 to 6 ø eset (unlock) Panel thickness to 6 5 ø9 LCK ø Adjust ring 9. (- blocks) Adust ring 9. (- blocks) 69. (- blocks) ø0 Panel thickness to 6 ø0 Panel thickness to 6 5 ø Adjust ring 9. (- blocks) 69. (- blocks) Locking ing Safety Lever Lock 9. ( or blocks) 69. ( or blocks) Adust ring 9. (- blocks) 69. (- blocks) Panel Thickness 0.8 to Panel thickness to 6 ø0 ø6 Panel thickness to Panel Thickness 0.8 to 6 ø9 Panel thickness to 6 9 ø ø.5 9. LCK eset (unlock).8 9. LCK ø Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 705

36 ømm - TW Series Illuminated Pushbuttons Dimensions continued Extended Extended with Full Shroud Square Extended Panel Thickness to 6 ø ø9 7 Panel Thickness to 6 ø ø9 7 Panel Thickness to Signaling Lights 9 0 Marking plate: ø5.5mm Marking plate: ø5.5mm 9mm Push-Turn-eset 0mm Push-Turn-eset Mushroom Panel Thickness to 6 eset Angle: 75 Panel Thickness to 6 eset Angle 75 Panel Thickness to 6 Marking plate: mm ø9 7 ø0 7 ø9 7 elays & Sockets Push-Pull.5 Panel Thickness to 6 0 Marking plate: ø.9mm.5 0 Marking plate: ø.9mm.5 0 Marking plate: ø.9mm ø0 7 Timers Marking plate: ø.9mm Illuminated Selector Switches Contact Block with Full Voltage Adaptor ( blocks) M.5 Terminal Screws Panel Thickness to Contactors Contact Blocks with Full Voltage Adaptor ( blocks) M.5 Terminal Screw Panel Thickness to 6mm M.5 Terminal Screws Panel Thickness to Terminal Blocks Contact Blocks with Full Voltage Adaptor Contact Blocks with Full Voltage Adaptor M.5 Terminal Screws Panel Thickness to 6 Circuit Breakers

37 ømm - TW Series Pilot Lights ound Flush APW Full Voltage Terminal cover APS-PVL (supplied) Panel thickness to ø9 ø ound Flush Marking Type APWB Full Voltage Panel thickness to 6 7. ø9 Dome APW Full Voltage Terminal Cover APS-PVL (supplied) Panel thickness to ø9 ø ø Square Flush Marking Type APQWB Full Voltage Terminal cover APS-PVL (supplied) Panel thickness to Illuminated Selector Switches. Adust ring 9. ( block) 69. (- blocks) 89. (blocks) Panel thickness to 6 5 ø9 ø Dimensions continued ound Flush APW M.5 Terminal Screws T transformer 59.5 Panel thickness to 6 7. ø9 ø ound Flush Marking Type APWB M.5 Terminal Screws 69.5 Panel thickness to 6 7. Dome APW M.5 Terminal Screws T transformer 59.5 ø9 Panel thickness to 6.5 ø9 ø ø Square Flush Marking Type APQWB M.5 Terminal Screws Panel thickness to Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 707

38 .5.5 ømm - TW Series Signaling Lights Panel Cut-ut ø. 50 (5 min.) max. Dimensions continued Diagram Part Dimension (*) Pushbuttons Pilot Light Illuminated Pushbuttons Selector Switches The minimum mounting centers are applicable to switches with one layer of contact blocks (one to two contact blocks). When two layers of contact blocks are mounted, determine the minimum mounting centers in consideration of convenience for wiring. *) ø0 mm mushroom button type: 0 mm minimum *) -position, -position lever selector switch: 9 mm minimum *) -position, 5-position lever selector switch: 50 mm minimum When high temperature is expected, take necessary measures such as securing sufficient mounting centers or using a cooling fan. The mm recess is for preventing rotation and is not necessary when the nameplate or anti-rotation ring is not used. Illuminated Selector Switches All dimensions in mm. elays & Sockets.The Ø 0.7 (Ø.5mm) recess is necessary when either the nameplate or anti-rotation ring is used.. *>.0 (6mm) for - or -position. >.95 (50mm) for - or 5-position. Accessory Dimensions GL- Anti-otation ing LW-C Metal Button Guard 8.6 CW- Pushbutton ubber Boot M P.0 9 P.0 M 9 B- Mounting Hole ubber Plug ø9 0. ø ø Mounting Centers 50 min. ø t ø 8.5 ø Button installed ø ø6 ø Button installed ø5 Flush Extended Timers HW9Z-KL Lock-out Adaptor AW-PB ound Plastic Bezel AW-FPB ound Plastic w/full Shroud 8.5 Panel Thickness 0.8 to. ø9 ø Circuit Breakers Contactors Terminal Blocks AW-QFB Square Full Shroud 0 70 ø50 (ID: ø.) ø. hole ø (inside) Waterproof ubber Gasket 0.5t 0 Finger-Safe Cover Dimensions APS-PVL 7..8 Ø

39 ømm - TW Series ption: Nameplate (Panel) Waterproof Gasket Adjustment ing Panel Thickness LED Lamp Holder ptions Lead Holder Component Construction and General Instructions TW Series Full Voltage Adaptor: Contact Block Full Size : Lens or Button Bezel perator Waterproof Lens (ound lens used on square pushbuttons and pilot lights only), Base Instructions for Switches and Pilot Devices TW Series: Adjustment for Panel Thickness The panel thickness ring provides adjustment from 0.0 to 0. ( to 6mm) in 0.00 (0.mm) increments. otate the ring until the markings around the periphery are aligned for the desired thickness, as shown below. Scale on Adjustment (in 0. mm) mm Ex. Panel thickness mm 5 A 6 mm Panel Thickness Scale (in mm on the operator) Ex. Panel thickness.6 mm Note: When a nameplate or an anti-rotation ring is used, add 0.0 (0.8mm) to the panel thickness dimension. An adjustment for panel thicknesses shown below can be made quickly by using the contact block remover tool..6mm mm mm.mm.5mm.mm Contact Block emoval Tool Contact Block emoval Tool (TW-KC) Panel Thickness Adjustment ing Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 709

40 ømm - TW Series Signaling Lights Pilot Lights and Pushbuttons Instructions continued IMPTANT: Install the body of the TW control unit with the panel thickness scale facing up. ctagonal and ound Bezels ctagonal and round bezels screw into the operator. Use a locking ring wrench (optional) for secure tightening and easy removal. ound flush and extended buttons snap onto the operator base. Mushroom buttons screw onto the operator base. Every round lens can be used with or without legend markings. Engraving can be done on a white translucent plate which is placed in the lens, or clear mylar can be printed and placed in the lens. ound Marking Unit Insert marking plate under lens Press in Marking Plate Lens Press in round flush and extended lens. Screw in mushroom lens elays & Sockets Square Bezels Square bezels are installed in a -step procedure. First install the base plate from the front. Then install the lock nut using the nut locking wrench (optional). Finally, install the square bezel, which snap-fits onto the base plate. Square buttons also snap onto the operator base. Every square lens can be used with or without legend markings. Engraving can be done on a white translucent plate which is placed in the lens, or clear mylar can be printed and placed in the lens. Square units include a round waterproof lens which screws into the operator. The square outer lens snaps on. Square Marking Units Pilot Light Illuminated Pushbutton Timers Insert marking plate under lens Square Lens Insert Marking Plate Insert marking plate under lens Square Lens Press in Marking Plate Lens etainer Waterproof Lens Contactors To remove square lens from operator, place a screwdriver under the indentation on the side of the lens. To remove the marking plate, place a screwdriver under the indentation and lift out the plate. The lens retainer can be removed by pressing a /6 screwdriver into one of the recesses. Terminal Blocks Circuit Breakers Marking Plate Engraving Area Shape Engraving Area Used With ound Ø 0.55 (mm) Illuminated pushbuttons ALWB Ø 0.55 (mm) Pilot lights APWB Mushroom Ø 0.55 (mm) Illuminated mushroom ALWB Square 0.8 (mm) Square pilot lights APQWB Square 0.8 (mm) Square illuminated pushbuttons ALQWB 70

41 ømm - TW Series Selector Switches Instructions, continued The operator shaft of each unit has a recess to identify in which direction to install the handle. Align the handle with the recess. Press color insert (TW-HC) into the handle and then press handle into the operator, as shown below. Illuminated Selector Switch emove color insert before pulling out the handle. Standard perating Positions ecess Selector Switch (non-illuminated) Press in handle Press in color insert -Postion, 90º -Postion, 5º -Postion, 5º 5-Postion, 0º Positions: Non-Illuminated -Position perators Installation of LED Illuminated Units 0 0 s are recommended for use in areas subjected to inductive noise. When using full voltage types, install a protection diode as shown below. (Diode with DC power supply to protect against surges and noise.) Terminal LED Terminal Diode Signaling Lights elays & Sockets Timers Contactors Terminal Blocks Circuit Breakers IDEC () USA & Canada 7

42 FB Enclosures Signaling Lights Enclosures for W, HW & TW mm Switches and Pilot Devices features: Three compact sizes (mm): 76 x 76, 0 x 76 and 00 x 76 Available in,,, or 5 mounting hole configurations Easy installation: panel, wall or frame mountable Polycarbonate enclosure cover and base, stainless steel screws UL Listed, ohs Compliant IP65 and Type rated (when installed with IP65 or Type unit) Class II electric shock protection (when installed with applicable unit) Ideal for high temperatures (-5 to +60ºC) and corrosive environments Circuit Breakers Terminal Blocks Contactors Timers elays & Sockets Specifications perating Conditions Degree of Protection Electric Shock Protection Material Applicable Switches and Pilot Devices Weight (approx.) Ambient temperature elative humidity Storage temperature Degree of pollution 5 to +60 C (no freezing) 5 to 85%H (no condensation) 0 to +80 C (no freezing) IP65 (when IP65 switches and pilot devices are installed) Type (when Type switches and pilot devices are installed) Class II (when class II switches and pilot devices are installed) Cover and base Cover mounting screws Polycarbonate Stainless steel HW, TW and W series switches, pilot devices and accessories (see note below) 76mm type: 5g (FBW-Z) 0mm type: 8g (FBW-Z) 00mm type: g (FBW-Z) Choose switches, pilot devices and accessories that match the mounting hole centers, effective depth behind the cover, and the thickness of the cover where switches and pilot devices are installed ( mm). Enclosures with 0 or 6mm mounting hole centers may limit the knob orientation of selector switches because the contact blocks can be mounted in one direction only on these mounting centers. Enclosure s Size (mm) Description 76 x 76 x x 76 x x 76 x 59.5 Distance Between Hole Centers (mm) Enclosure hole, Yellow FBW-Y Enclosure hole, Beige FBW-Z Enclosure hole, Beige FBW-Z 50 Enclosure hole, Beige FBW-Z 0 Enclosure hole, Beige FBW-Z 50 Enclosure hole, Beige FBW-Z 6 Enclosure 5 hole, Beige FBW-5Z 0 Accessories Description Plug Adaptor.5mm Mounting Bracket HW9Z-PG5 FB9Z-PK Connectors and nuts are not supplied with accessories. Switch and Pilot Device Accessories Series Description HW Series W Series E-Stops TW Series Nameplate Marking plate for nameplate Anti-rotation ring EM switch guard Switch cover Pushbutton clear boot Padlock cover Nameplate EM switch guard Anti-rotation ring Nameplate Anti-rotation ring Metal button guard Pushbutton clear boot Button cover Padlock cover HWAM, HWAQ, HWAS, HWAV HWNP HW9Z-L HW9Z-KG, HW9Z-KG, HW9Z-KG, HW9Z-KG HW9Z-K, HW9Z-K C-, C- HW9Z-KL HWAV HW9Z-KG, HW9Z-KG, HW9Z-KG, HW9Z-KG HW9Z-L NWA, NWAQ, NWAS-0, NWAL-0, NWAQL-0, NWAV GL- LW-C C-, C- CW- HW9Z-KL 7