Pushbuttons/Selectors/Pilot Lights/Buzzers AR30 and DR30 General information

Transcription

1 Pushbuttons/electors/Pilot ights/buzzers AR and DR General information The full range of the contact blocks and transformer units suitable for the AR22 and DR22 series may also be fitted to the AR and DR series. Illuminated pushbuttons Pushbuttons Pilot lights Features Quick-replacement contact blocks and transformer units The snap-on construction makes replacement and addition of contact blocks and transformer units very simple and straightforward. Oil-and dust-proof operator module construction The protection level of the AR/DR operator modules conforms to IEC tandard IP65. The special seals protect the operator modules and switch mechanisms against oil, dust, and grime, thus ensuring high performance in dusty and moist environments. Miniaturization elector switches with NO+NC: 4mm deep Pilot lights: 34mm deep The transformer now occupies far less space. elector switch Illuminated pushbutton switch with transformer Pilot light/ tandard 4mm 62.5mm* 34mm transformer * 2V and over: 66.5mm AF95-4 AF95-0 AF95-8 ARE0 ARE0R DRD0 AF95-6 AF97-75 AF95-2 ARG3 ARM0R ARPR Emergency stop pushbuttons AF97-69 ARV0 ARV0R ARVR elf-cleaning contacts All the contacts are double break type and feature self-cleaning action. Every time the switch is operated, the contact surfaces are wiped with a sliding movement, thus ensuring high contact reliability even at low voltage and small current levels (5V, 5mA). Movable contact Return spring tationary contact electors AF95-3 AF97-68 Wiring Wiring from two directions is possible. Wiring in both vertical and lateral directions facilitates wiring in narrow spaces. Color coding of contact blocks makes wiring easy. NO: Blue, NC: Red amp terminal and transformer unit: Black afety A terminal cover is provided, assuring safety and security. FUJI s original Trigger Action mechanism is used in the emergency stop pushbuttons. They are suitable for emergency stop and safety. This mechanism prevents the contacts from moving until the button is pushed and locked. Metal nut afer model with metal nut is also available Protection Excellent oil-tight construction (IP65) of the operator. Closure of the contact block has been improved. Approvals For further information related to approved type, see page /59 to /62. /58 Fuji Electric FA Components & ystems Co., td./d & C Catalog

2 Pushbuttons/electors/Pilot ights/buzzers AR and DR Quick reference guide Illuminated pushbutton switches Operator Operator Operator Extended round head ARE0, E5 Extended with full guard (24mm dia. with openings) ARG2, G7 Push-lock, turn-reset (40mm dia. with white arrow) ARV5 ee page /74, /97 ee page /74, /97 ee page /74, /98 AF95-4 AF AF97-75 Extended with transparent full guard (24mm dia.) ARG4, G9 Extended with full guard (24mm dia.) ARG3, G8 Push-pull ARQ7 ee page /74, /97 ee page /74, /97 ee page /74, /98 KKD05-64 AF95-6 AF96-85 Pushbutton switches Operator Operator Operator Flush round head ARF0R, F5R Mushroom head (29mm dia.) ARM4R Mushroom head with full guard (35mm dia. metal nut) ARGR ee page /76, /99 ee page /76, /99 ee page /76, /99 AF95- AF95-8 AF Extended round head ARE0R, E5R Extended with full guard (24mm dia.) ARGR, G6R Giant head ARB0R ee page /76, /99 ee page /76, /99 ee page /76, /00 AF95-0 AF95-6 AF Flush round head ymbol mark type ARFAR, FBR Extended with half guard ARG0R, G5R Giant head with guard ARBR ee page /76, /99 ee page /76, /99 ee page /76, /00 AF98-95 AF95-9 AF Extended round head ymbol mark type AREAR, EBR Pin lock ARGPR Giant head with full guard ARB2R ee page /76, /99 ee page /76, /99 ee page /76, /00 AF98-94 AF AF Mushroom head (40mm dia.) ARM0R, M5R Mushroom head with full guard (40mm dia.) ARM3R, M8R Giant head with full guard ARB3R ee page /76, /99 ee page /76, /99 ee page /77, /00 AF95-2 AF95-7 AF95-58 Note: ARM8R: Not approved standard : ee page /242 Fuji Electric FA Components & ystems Co., td./d & C Catalog /59

3 Pushbuttons/electors/Pilot ights/buzzers AR and DR Quick reference guide Pushbutton switches Operator Operator Operator Pushbutton with selector ring (2-position) ARR, 2R, 3R, 6R Push-lock, turn-reset (40mm dia. with white arrow) ARV5R Pushbutton with emergency operating cap ARFVR ee page /78, /00 ee page /77, /00 ee page /77, /00 AF AF97-69 AF96-87 Push, turn-lock ARN0R ee page /77, /00 AF Emergency stop pushbutton switches (conform to EN48) Operator Operator Operator Push-lock, turn-reset (oft-touch 40mm dia. with white arrow) ARV0R Push-lock, turn-reset (65mm dia.with white arrow) ARVR Push-lock, pull-reset (35mm dia.) ARQ2R ee page /79, /0 ee page /79, /0 ee page /79, /0 AF97-69 AF97-68 AF95-3 Push-lock, turn-reset (40mm dia.) ARV2R ee page /79, /0 Notes: Provided with the AF95-76 (Direct opening action) Emergency stop illuminated pushbutton switches (conform to EN48) Operator Operator Push-lock, turn-reset (oft-touch 40mm dia. with white arrow) ARV0 Push-lock, turn-reset (40mm dia.) ARV2 ee page /80, /0 ee page /80, /0 AF97-75 AF95-2 Note: Provided with the (Direct opening action) : ee page /242 /60 Fuji Electric FA Components & ystems Co., td./d & C Catalog

4 Pushbuttons/electors/Pilot ights/buzzers AR and DR Quick reference guide elector switches Operator Operator Operator Knob ARPR, PCR Key ARJR, JCR Key (ong durability) ARJAR ee page /8, /02 ee page /8, /02 ee page /8, /02 AF95-3 AF95-5 AF95-5 ever ARWR, WCR ee page /8, /02 AF95-4 Illuminated selector switches Operator Knob ARP ee page /88, /02 AF95-5 Pilot lights ens ens ens Dome DRD0 Dome with dimmer control DRD Flush square (40mm sq. transparent lens) DRM4M * ee page /90, /03 ee page /90, / ee page /92, /05 AF95-8 AF02-63 AF97-63 Extended round DRE3 Flush square (34mm sq. transparent lens) DRF4M * ee page /90, /03 ee page /92, /05 AF95-20 AF97-65 Faceted DRK0 Flush rectangular (Transparent lens) DRF4N * ee page /90, / ee page /92, /05 AF95-9 AF97-64 Note: With resistor unit and resistor types: Not approved standard * ED 2V AC type: Not approved standard : ee page /242 Fuji Electric FA Components & ystems Co., td./d & C Catalog /6

5 Pushbuttons/electors/Pilot ights/buzzers AR and DR Quick reference guide Joy stick selector switches andle andle andle Ball type ARA0, A5 Ball type with lock ARA, A6 Rubber cap type ARA2, A7 ee page /93, /06 ee page /93, /06 ee page /93, /06 AF97-48 AF97- AF97-57 Buzzers ound ound ound Electronic sound DRB5* Magnetic sound DRB0 Electronic sound (IP54) DRB8 * ee page /94, /07 ee page /94, /07 ee page /94, /07 AF96-38 AF96-8 AF Electronic sound (economy) DRB6 ee page /94, /07 KK02-7 Note: * 6V AC, 0V DC types: Not approved standard Numerical indicators Display Display One-digit DRN Two-digit DRN2 ee page /95, /08 ee page /95, /08 KK02-55B KK02-56B /62 Fuji Electric FA Components & ystems Co., td./d & C Catalog

6 Pushbuttons/electors/Pilot ights/buzzers AR and DR number nomenclature Illuminated pushbuttons AR E0 0 E3 R ➀ ➁ ➂ ➃ ➄ ➅ ➀ Product category AR: mm-dia. illuminated pushbutton mm-dia. emergency stop illuminated pushbutton ➁ Operator Illuminated pushbutton E0: Extended round head E5: Extended round head (Alternate) G4: Extended with transparent full guard (24mm dia.) G9: Extended with transparent full guard (24mm dia. alternate) G2: Extended with full guard (24mm dia. with openings) G7: Extended with full guard (24mm dia. with openings, alternate) G3: Extended with full guard (24mm dia.) G8: Extended with full guard (24mm dia. alternate) V5: Push-lock, turn-reset (40mm dia. with white arrow) * Q7: Push-pull Emergency stop illuminated pushbutton V0: Push-lock, turn-reset (oft-touch 40mm dia. with white arrow) V2: Push-lock, turn-reset (40mm dia.) ➂ Contact arrangement 0: NO : 3NO 0: NC 03: 3NC : NO+NC 33: 3NO+3NC 20: 2NO 40: 4NO 02: 2NC : 4NC 22: 2NO+2NC 50: 5NO 05: 5NC ➃ amp voltage Incandescent lamp 54: 5.5V AC/DC, without transformer C4: 5V AC/DC, without transformer D4: 20V AC/DC, without transformer E4: 24V AC/DC, without transformer 4: 00-0V AC, with transformer 4: 5-27V AC, with transformer M4: V AC, with transformer Q4: 2-254V AC, with transformer 4: V AC, with transformer T4: 400-0V AC, with transformer V4: 480V AC, with transformer W4: V AC, with transformer ED lamp A3: 6V AC, without transformer 63: 6V DC, without transformer B3: 2V AC/DC, without transformer C3: 5V AC/DC, without transformer E3: 24V AC/DC, without transformer 3: 00-0V AC, with transformer 3: 5-27V AC, with transformer M3: V AC, with transformer Q3: 2-254V AC, with transformer 3: V AC, with transformer T3: 400-0V AC, with transformer V3: 480V AC, with transformer W3: V AC, with transformer ➄ Color of lens G: Green Y: Yellow R: Red * 2 A: Orange W: White : Blue ➅ pecial product Z9: Resisting water-soluble cutting oils and heat Z8: With a contact protection cover Z4: Resisting sulfuration gas ZB: Meeting IP2X finger-protection standards ZM: Metal nut Notes: * Products with no trigger action mechanism. These products cannot be used as emergency stop switches that comply with EN standards. * 2 Button color of emergency stop illuminated switches are Red only. The manufacturing range varies depending on the model. For details, refer to the contents of this catalog. Fuji Electric FA Components & ystems Co., td./d & C Catalog /63

7 Pushbuttons/electors/Pilot ights/buzzers AR and DR number nomenclature Pushbuttons AR E0R 0 R ➀ ➁ ➂ ➃ ➄ ➅ ➀ Product category AR: mm-dia. pushbutton mm-dia. emergency stop pushbutton ➁ Operator Pushbutton switch F0R: Flush round head F5R: Flush round head (Alternate) E0R: Extended round head E5R: Extended round head (Alternate) FAR: Flush round head (ymbol mark type) FBR: Flush round head (ymbol mark type, alternate) EAR: Extended round head (ymbol mark type) EBR: Extended round head (ymbol mark type, alternate) M0R: Mushroom head (40mm dia.) M5R: Mushroom head (40mm dia. Alternate) M4R: Mushroom head (29mm dia.) GR: Extended with full guard (24mm dia.) G6R: Extended with full guard (24mm dia. Alternate) GPR:Pin lock G0R: Extended with half guard G5R: Extended with half guard (Alternate) M3R:Mushroom head with full guard (40mm dia.) M8R:Mushroom head with full guard (40mm dia. Alternate) GR:Mushroom head with full guard (35mm dia. metal nut) B0R: Giant head BR: Giant head with guard B2R: Giant head with full guard B3R: Giant head with full guard R: Pushbutton with selector ring (2-position) 2R: Pushbutton with selector ring (2-position) 3R: Pushbutton with selector ring (2-position) 6R: Pushbutton with selector ring (2-position) N0R: Push, turn-lock V5R: Push-lock, turn-reset (40mm dia. with white arrow) * FVR: Pushbutton with emergency operating cap Emergency stop pushbutton switch V0R: Push-lock, turn-reset (oft-touch 40mm dia. with white arrow) V2R: Push-lock, turn-reset (40mm dia.) VR: Push-lock, turn-reset (oft-touch 65mm dia. with white arrow) Q2R: Push-lock, pull-reset (35mm dia.) ➄ ymbol mark (For ARFAR, FBR, EAR, EBR) ymbol mark I T I T Color of button White Black White Black White Black Clear Color of mark Red Green Green Black Code B B 2B ➅ pecial product Z9: Resisting water-soluble cutting oils and heat Z8: With a contact protection cover Z4: Resisting sulfuration gas ZB: Meeting IP2X finger-protection standards ZM: Metal nut ➂ Contact arrangement 0: NO : 3NO 0: NC 03: 3NC : NO+NC 33: 3NO+3NC 20: 2NO 40: 4NO 02: 2NC : 4NC 22: 2NO+2NC : 4NO+4NC 50: 5NO 05: 5NC ➃ Color of button G: Green Y: Yellow R: Red *2 A: Orange B: Black : Blue W: White C: Clear T: Green, Red, Black (For ARF0R) (For ARFAR, FBR, EAR, EBR) Notes: * Products with no trigger action mechanism. These products cannot be used as emergency stop switches that comply with EN standards. * 2 Button color of emergency stop switches are Red only. The manufacturing range varies depending on the model. For details, refer to the contents of this catalog. /64 Fuji Electric FA Components & ystems Co., td./d & C Catalog

8 Pushbuttons/electors/Pilot ights/buzzers AR and DR number nomenclature elector and illuminated selector switches AR P 2 0 E3 G ➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇ ➈ ➀ Product category AR: mm dia. selector switch and illuminated selector switch ➁ Operator elector switch PR: Knob PCR: Knob operated control type WR: ever WCR: ever operated control type JR: Key JCR: Key operated control type JAR: Key (ong durability) Illuminated selector switch P: Knob ➂ Operation 2: 2-position, maintained 0: 2-position, spring return 3: 3-position, maintained 6: 3-position, spring/manual return (eft to center) 7: 3-position, spring/manual return (Right to center) : 3-position, spring return 4: 4-position, maintained (For ARPCR, WCR) 5: 5-position, maintained (For ARPCR, WCR) ➃ Key removable position A: eft B: eft and right C: eft, right and center D: Right E: Center F: Right and center G: eft and center ➄ Contact arrangement 0: NO : 3NO 0: NC 03: 3NC : NO+NC 33: 3NO+3NC 20: 2NO 40: 4NO 02: 2NC : 4NC 22: 2NO+2NC : 4NO+4NC 50: 5NO 05: 5NC Note: Control type: ee page /85 to /87 ➅ amp voltage Incandescent lamp 54: 5.5V AC/DC, without transformer C4: 5V AC/DC, without transformer D4: 20V AC/DC, without transformer E4: 24V AC/DC, without transformer 4: 00-0V AC, with transformer 4: 5-27V AC, with transformer M4: V AC, with transformer Q4: 2-254V AC, with transformer 4: V AC, with transformer T4: 400-0V AC, with transformer V4: 480V AC, with transformer W4: V AC, with transformer ED lamp A3: 6V AC, without transformer 63: 6V DC, without transformer B3: 2V AC/DC, without transformer C3: 5V AC/DC, without transformer E3: 24V AC/DC, without transformer 3: 00-0V AC, with transformer 3: 5-27V AC, with transformer M3: V AC, with transformer Q3: 2-254V AC, with transformer 3: V AC, with transformer T3: 400-0V AC, with transformer V3: 480V AC, with transformer W3: V AC, with transformer ➆ Color of knob B: Black (Not available for illuminated selector switch) G: Green R: Red W: White (Not available for selector switch) Y: Yellow (Not available for selector switch) A: Orange (Not available for selector switch) : Blue (Not available for selector switch) ➇ Key type No. A, B, C, D, E or F ( A is standard) ➈ pecial product Z9: Resisting water-soluble cutting oils and heat Z8: With a contact protection cover Z4: Resisting sulfuration gas ZB: Meeting IP2X finger-protection standards ZM: Metal nut Note: The manufacturing range varies depending on the model. For details, refer to the contents of this catalog. Fuji Electric FA Components & ystems Co., td./d & C Catalog /65

9 Pushbuttons/electors/Pilot ights/buzzers AR and DR number nomenclature Pilot lights DR D0 E3 W ➀ ➁ ➂ ➃ ➄ ➀ Product category DR: mm dia. pilot light ➁ ens D0: Dome E3: Extended round K0: Faceted D: Dome with dimmer control F4M: Flush square (34mm sq. transparent lens) F4N: Flush rectangular (Transparent lens) M4M: Flush square (40mm sq. transparent lens) ➃ Color of lens or color plate G: Green Y: Yellow R: Red A: Orange W: White : Blue ➄ pecial product Z9: Resisting water-soluble cutting oils and heat Z4: Resisting sulfuration gas ZB: Meeting IP2X finger-protection standards ZM: Metal nut Note: The manufacturing range varies depending on the model. For details, refer to the contents of this catalog. ➂ amp voltage Incandescent lamp 54: 5.5V AC/DC, without transformer C4: 5V AC/DC, without transformer D4: 20V AC/DC, without transformer E4: 24V AC/DC, without transformer 4: 00-0V AC, with transformer 4: 5-27V AC, with transformer M4: V AC, with transformer Q4: 2-254V AC, with transformer 4: V AC, with transformer T4: 400-0V AC, with transformer V4: 480V AC, with transformer W4: V AC, with transformer FQ: 50V DC, with resistor* Q: 0V DC, with resistor* MQ: 220V DC, with resistor* ED lamp A3: 6V AC, without transformer 63: 6V DC, without transformer B3: 2V AC/DC, without transformer C3: 5V AC/DC, without transformer E3: 24V AC/DC, without transformer 3: 00-0V AC, with transformer 3: 5-27V AC, with transformer M3: V AC, with transformer Q3: 2-254V AC, with transformer 3: V AC, with transformer T3: 400-0V AC, with transformer V3: 480V AC, with transformer W3: V AC, with transformer 7: 0V DC, with resistor unit FR: 50V DC, with resistor* R: 0V DC, with resistor* MR: 220V DC, with resistor* ED unit (For DRF4M, F4N, M4M type) 65: 6V DC, without transformer 25: 2V AC, without transformer B5: 2V AC/DC, without transformer E5: 24V AC/DC, without transformer 5: 00-0V AC, with transformer 5: 5-27V AC, with transformer M5: V AC, with transformer Q5: 2-254V AC, with transformer 5: V AC, with transformer T5: 400-0V AC, with transformer V5: 480V AC, with transformer W5: V AC, with transformer E: 0V DC, with resistor unit 8: 00-0V AC, short-body with transformer 8: 5-27V AC, short-body with transformer M8: V AC, short-body with transformer 9: 00-0V AC, short-body with transformer 9: 5-27V AC, short-body with transformer M9: V AC, short-body with transformer Note: * DRD0, K0 type only /66 Fuji Electric FA Components & ystems Co., td./d & C Catalog

10 Pushbuttons/electors/Pilot ights/buzzers AR and DR number nomenclature Joy stick selector switches ARA 0 N A0A0 B ➀ ➁➂ ➃ ➄ ➀ Product category ARA: mm-dia. Joy stick selector switch ➁ andle 0: Ball type (without lock, manual return) : Ball type with lock (manual return) 2: Rubber cap type (without lock, manual return) 5: Ball type (without lock, spring return) 6: Ball type with lock (spring return) 7: Rubber cap type (without lock, spring return) ➂ Terminal N: crew : older/tab ➃ Contact arrangement Contact arrangement Blank NO NC NO+NC 2NO 2NC 2NO+2NC Code crew 0 A B D E older/tab 0 2 Operating direction code of contacts ocked position 2 : Upper 2: Right 4 3: ower 4: eft 3 ➄ andle color B: Black Ex. ARA0N-A 0 A 0 B 234 Ordering information pecify the following:. number For the CCC approved product, add the suffix (CCC) to the type number Example: Pushbutton switch ARF0R-B(CCC) Buzzers DRB 5 E B ➀ ➁ ➂➃ ➀ Product category DRB: mm-dia. buzzer ➁ ound 5: Electronic sound 6: Electronic sound (economy) 0: Magnetic sound 8: Electronic sound (IP54) ➂ Operating voltage A: 6V AC ( 5, 8 ) 6: 6V DC ( 5, 8 ) E: 2-24V AC/DC ( 6 : 24V DC) F: 35-48V AC/DC ( 5, 8 ) G: 24V AC ( 6 ) : 00-0V AC M: V AC : 00-0V DC ( 5, 8 ) ➃ Color of head B: Black Numerical indicators DRN N E R ➀ ➁ ➂ ➃ ➄ ➅ ➀ Product category DRN: mm-dia. numerical indicators ➁ Display : One-digit 2: Two-digit ➂ Input logic N: Negative logic P: Positive logic ➃ Operating voltage B: 2V DC E: 24V DC ➄ uminous color R: Red G: Green ➅ Terminal Blank: older C: older (with connector) R: With right angle connector Fuji Electric FA Components & ystems Co., td./d & C Catalog /67

11 Pushbuttons/electors/Pilot ights/buzzers AR and DR Ratings and specifications tandards approved U508 CA C22.2 No.4 TÜV: EN TÜV: EN EN File No. E592 File No. R279 Pushbutton, Illuminated pushbutton: R elector, Illuminated selector: R Pilot lights: R95506 Joy stick selector switch: R (ever switch) Buzzer: J Emergency stop pushbutton Emergency stop illuminated pushbutton : R pecifications (Indoor use) Description Pushbutton switch Illuminated pushbutton switch Emergency stop pushbutton switch Emergency stop illuminated pushbutton switch elector switch Illuminated selector switch Joy stick selector (ever switch) Pilot light Numerical indicator Rated insulation voltage Mechanical durability Electrical durability Operating frequency Dielectric strength Insulation resistance Rated impulse dielectric strength Conditional short-circuit current hort-circuit protective device Pollution degree Vibration hock Ambient temperature (No condensation or no icing) torage temperature umidity Degree of protection 600V AC/DC * ee page /69 500,000 operations at 220V AC 6A million operations at 220V AC 3A 200 operations/hour (On-load factor: 40%) 2500V AC, minute * 3 00MΩ or more (500V DC megger) 6kV 000A Fuse 5A 3 Resonance: 0 to 55z, double amplitude 0.mm * 5 Constant: 6.7z, double amplitude 3mm Malfunction durability: 00m/s 2 * 6 Mechanical durability: 500m/s 2-20 to +70 C -5 to +70 C -40 to +80 C 45 to 85% R (within -5 to +40 C) IP65 * 7 250V AC/DC 250,000 operations 00,000 operations at 220V AC A (Res. load) 2000V AC, minute * 4 00MΩ or more (500V DC megger) 000A Fuse A 250V AC/DC * 2 6kV 32V AC/DC 000V AC, minute Mechanical durability: 500m/s 2-20 to +50 C Notes: * Illuminated type without transformer: 250V AC/DC * 2 Pilot light with transformer: 600V AC * 3 Illuminated type without transformer: 2000V AC, minute * 4 Pilot light with transformer: 2500V AC, minute * 5 Emergency stop type: 0 to 500z, double amplitude 0.7mm (acceleration 50m/s 2 ), according to the test condition of EN (998) * 6 Emergency stop type: 50m/s 2 * 7 ARQ7 and DRD type: IP40-20 to +40 C - to +85 C /68 Fuji Electric FA Components & ystems Co., td./d & C Catalog

12 Pushbuttons/electors/Pilot ights/buzzers AR and DR Ratings and specifications Mechanical durability Description Operations Pushbutton switch Momentary action 5 million Illuminated pushbutton switch Alternate action million Emergency stop pusubutton switch With selector ring 00,000 Emergency stop illuminated pusubutton Push-lock, turn-reset 00,000 Push-lock, pull-reset,000 elector switch Maintained, 2, 3, 4-contact million Maintained 5, 6, 7, 8-contact 500,000 Control type, spring return, spring/manual return 200,000 Illuminated selector switch Maintained Without transformer, 2, 3-contact million 4-contact 500,000 With transformer, 2-contact million 3-contact 500,000 Note: Key insertion/removal durability for selector switch key types Key type 0,000 Key (ong durability) type 20,000 pring return, spring/manual return 200,000 Buzzers Item DRB5 DRB6 DRB0 DRB8 Rated insulation voltage Without transformer: 60V AC/DC With transformer: 250V AC * ound level 90dB (0.m) 80dB (0.m) 70dB (m) 60dB (.0m) Durability 000h 80h 000h Frequency 2.4 to 3.3kz.9 to 2.5kz 2.4 to 3.3kz Intermittent cycle Approx. 70-cycle/min Approx. 70-cycle/min Current consumption ee the table below Dielectric strength Without transformer: 000V AC minute With transformer: 2000V AC minute * 2 Insulation resistance 00MΩ or more (500V DC megger) Pollution degree 3 Vibration Resonance: 0 to 55z, double amplitude 0.mm Constant: 6.7z, double amplitude 3.0mm hock Mechanical durability: 500m/s 2 Ambient temperature torage temperature umidity 20 to +60 C (No condensation or no icing) (with resistor unit: 20 to +40 C) to +70 C 45 to 85%R (within 5 to 40 C) Degree of protection IP00 IP54 Note: * DRB0 (without transformer): 250V AC * 2 DRB0 (without transformer): 2000V AC minute Current consumption Operational voltage 6V AC 6V DC 24V AC 24V DC 24V AC/DC 48V AC/DC 0V AC 0V DC 220V AC Current consumption DRB5, DRB8 70mA AC 35mA DC 40mA AC, 25mA DC 65mA AC, 20mA DC ma AC ma DC 5mA AC DRB6 25mA AC 45mA AC ma DC ma AC, 20mA DC ma AC 5mA AC DRB0 ma AC 20mA AC Fuji Electric FA Components & ystems Co., td./d & C Catalog /69

13 Pushbuttons/electors/Pilot ights/buzzers AR and DR Ratings and specifications Contact ratings U/CA standards AC (CO ø=0.35) Contact rated code 20V 240V 480V 600V Making Breaking Making Breaking Making Breaking Making Breaking current current current current current current current current A600 60A 6.0A A 3.0A 5A.5A 2A.2A DC T 0.95 = 6P (Max. 0ms) Description Contact rated Making current Breaking current code 25V 250V V600V Illuminated pushbutton switch P600.A 0.55A 0.2A Pushbutton (Ring type selector switch: AR2R only) Emergency stop pushbutton switch Emergency stop illuminated pushbutton switch (Except the overlap contact types) Overlap contact types of products shown above Q A 0.27A 0.A Pushbutton (Ring type selector switch: ARR, 6R only) elector switch (2-position only, except the overlap contact types) Illuminated selector switch (2-position only, except the overlap contact types) Pushbutton R0 0.22A 0.A (Ring type selector switch: AR3R only) elector switch (2-pos./overlap contact type, 3-, 4-, 5-pos. type) Illuminated selector switch (2-pos./overlap contact type, 3-pos. type) Note: Joy stick selector switches (ever switches): 250V AC, 5A (Res. load) 25V DC, 0.2A 24V DC, A (Res. load) EN standard/tüv approved Description Rated operational current Rated thermal Rated operational AC5 (Ind. load) DC3 (Ind. load) current voltage Rated operational current Rated operational current Illuminated pushbutton switch 0A 24V 6.0A 4.0A Pushbutton (Except the selector ring type) 20V 6.0A Emergency stop pushbutton switch 25V.3A Emergency stop illuminated pushbutton switch 240V 6.0A elector switch (2-position) 250V 0.45A Illuminated selector switch (2-position) 480V 2.5A 600V 2.0A elector switch (3, 4, 5-position) 0A 24V 6.0A 2.0A Illuminated selector switch (3-position) 20V 6.0A Pushbutton with selector ring 25V 0.65A 240V 6.0A 250V 0.23A 480V 2.5A 600V 2.0A Joy stick selector switch (ever switch) 5A 24V 0.7A amp rated voltage U/CA standards, TÜV approved 20V 0.3A 25V 0.5A 240V 0.3A ED lamp Incandescent lamp Full-voltage (without transformer) Max. 24V AC/DC Max. V AC/DC With transformer Max. 550V AC (hort-body type: Max. 220V AC) /70 Fuji Electric FA Components & ystems Co., td./d & C Catalog

14 Pushbuttons/electors/Pilot ights/buzzers AR and DR Ratings and specifications Operating characteristic (NO+NC) Description Pushbutton Illuminated pushbutton Emergency stop pushbutton Emergency stop illuminated pushbutton Push-lock type Push-pull type elector * 2 Illuminated selector Maintained pring/manual return pring return Ave. required operating force Operating travel 9N (Push-lock type: 20N) Approx. 6mm N * Approx. 9mm 45N Approx. 9mm 0.5N m 2-position: Approx N m 3-position: Approx N m 2-position: Approx. 60 (Push-lock type: Approx. 9mm, operation angle: Approx. 45 ) (Operation angle: Approx. 45 ) 3-position: Approx position: Approx position: Approx. 45 Required return force (Push-lock type: 0.6N m) 0.6N m N (pull) 5-position: Approx. 0.5N m 0.3N m Notes: * ARV2R type: 45N * 2 4-position, 5-position: 2NO+2NC amp ratings Illuminated pushbuttons, illuminated selectors, pilot lights (round type) Transformer amp voltage ED (lamp base: BA9/3) Without transformer With transformer (tandard type: AR9T5) With resistor unit (AR9T59-) 5.5V AC/DC 6V AC 6V DC 2V AC/DC 5V AC/DC 20V AC/DC 24V AC/DC 0V AC 27V AC 220V AC 254V AC 380V AC 0V AC 480V AC 550V AC 0V DC APX50-6 APX50-D6 APX50-2 APX50-5 APX50-24 APX50-6 APX50-6 APX50-24 Rated voltage 6V AC 6V DC 2V AC/DC 5V AC/DC 24V AC/DC 6V AC 6V AC 24V AC/DC Consumption Green, red, orange, amber: 7mA AC Yellow: 26mA AC Blue: 6mA AC Green, red, orange, amber: ma DC Yellow: 33mA DC Blue: 22mA DC 4mA AC, ma DC 3mA AC, ma DC 2mA AC, ma DC.5VA 2.5VA.2W Notes: hort body pilot lights: 0V AC, 27V AC, 220V AC only Replace the mark by the lamp luminous color code, see page /73 Incandescent (lamp base: BA9/3) AX35 AX279 AX AX29 AX35 AX35 Rated voltage 6.3V AC/DC 8V AC/DC 24V AC/DC V AC/DC 6.3V AC/DC 6.3V AC/DC Consumption 0.9W 0.8W 0.9W 0.8W 2VA 2VA 2VA 2.5VA 2.5VA 2.5VA 2.5VA 2.5VA Pilot lights with resistor amp Voltage ED (lamp base: E2/5) Incandescent (lamp base: E2/5) 50V DC 0V DC 220V DC APX * Rated voltage 24V AC/DC Consumption 0.8W.7W 3.3W AX Rated voltage 8V AC/DC Consumption 5W 0W 20W Notes: * White: APX509-24O Replace the mark by the lamp luminous color code, see page /73 Fuji Electric FA Components & ystems Co., td./d & C Catalog /7

15 Pushbuttons/electors/Pilot ights/buzzers AR and DR Ratings and specifications Pilot lights (DRF4M, F4N, M4M types) Transformer amp voltage ED (lamp base: BA9/3) Without transformer With transformer unit (ED: AR9T557) (Incandescent: AR9T5) With resistor unit (AR9T59-) 5.5V AC/DC 6V DC 2V AC 2V AC/DC 5V AC/DC 20V AC/DC 24V AC/DC 0V AC 27V AC 220V AC 254V AC 380V AC 0V AC 480V AC 550V AC 0V DC * DR9Q00-6 DR9Q002-6 DR9Q003-6 DR9Q00-2 DR9Q002-2 DR9Q003-2 DR9Q00-B DR9Q002-B DR9Q003-B DR9Q00-E DR9Q002-E DR9Q003-E DR9Q00-2 DR9Q002-2 DR9Q003-2 DR9Q00-E DR9Q002-E DR9Q003-E Rated voltage 6V DC 2V AC 2V AC/DC 24V AC/DC 2V AC 24V AC/DC Consumption Yellow, orange, amber: 20mA DC Red: 48mA DC Yellow, orange, amber: 90mA AC Red: 25mA AC Yellow, orange, amber: 84mA AC, 60mA DC Red: 27mA AC, 24mA DC Yellow, orange, amber: 42mA AC, ma DC Red: 6mA AC, 2mA DC 3VA.4W Incandescent (lamp base: BA9/3) AX35 AX279 AX AX29 AX35 Rated voltage 6.3V AC/DC 20V AC/DC 24V AC/DC V AC/DC 6.3V AC/DC Consumption 0.9W 0.8W 0.9W 0.8W 2VA 2VA 2VA 2.5VA 2.5VA 2.5VA 2.5VA 2.5VA Notes: * DR9Q00: For DRM4M type DR9Q002: For DRF4N type DR9Q003: For DRF4M type Replace the mark by the lamp luminous color code, see page /73 /72 Fuji Electric FA Components & ystems Co., td./d & C Catalog

16 Pushbuttons/electors/Pilot ights/buzzers AR and DR Ratings and specifications Numerical indicators Operational voltage 2V DC, 24V DC Current consumption One-digit 00mA DC Two-digit 200mA DC amp durability amp ED Durability Approx. 000h Judgement criterion When brightness is less than 50% of initial value Incandescent Approx. 5000h (AC) When the bulb burns out Note: The operating voltage for incandescent lamps is set at 80 to 90% of the lamp's rated voltage. Estimated durability for ED lamps Absolute brightness Durability judgement line Rated voltage. Rated voltage Incandescent lamp voltage characteristics Durability (h) 00,000 50,000 20,000 0,000 5,000 2,000, uminous flux [AC voltage00%] Durability uminous flux [%] Time 0 3 [h] Notes: Durability at Ta=25 C Durability is affected by temperature, humidity, and voltage fluctuation Voltage [%] Combination of lens color and ED luminous color Button color (lens or color plate) Color Green Red White Yellow Orange Blue Code G R W Y A ED lamp (high-brightness) uminous color Green Red Orange Yellow Amber Blue APX50- G APX50- R APX50- O APX50- Y APX50- A APX50- * APX507-24G APX507-24R APX509-24O APX507-24Y APX507-24A APX ED unit uminous color Yellow Red Orange Yellow Amber * 2 DR9Q003- Y DR9Q003- R DR9Q003- O DR9Q003- Y DR9Q003- A * 3 DR9Q002- Y DR9Q002- R DR9Q002- O DR9Q002- Y DR9Q002- A * 4 DR9Q00- Y DR9Q00- R DR9Q00- O DR9Q00- Y DR9Q00- A Notes: * For pilot light with resistor * 2 For DRF4M type * 3 For DRF4N type * 4 For DRM4M type Replace the mark by the lamp voltage code, see page /7, /72 Fuji Electric FA Components & ystems Co., td./d & C Catalog /73

17 Illuminated Pushbuttons AR Illuminated pushbutton switches Operator Trans- Contact ED lamp Incandescent lamp former Momentary action Alternate action Momentary action Alternate action Extended round head Without NO ARE0-0 3 ARE5-0 3 ARE0-0 4 ARE5-0 4 NC ARE0-0 3 ARE5-0 3 ARE0-0 4 ARE5-0 4 NO+NC ARE0-3 ARE5-3 ARE0-4 ARE5-4 2NO+2NC ARE ARE With NO ARE0-0 3 ARE5-0 3 ARE0-0 4 ARE5-0 4 NC ARE0-0 3 ARE5-0 3 ARE0-0 4 ARE5-0 4 AF95-4 NO+NC ARE0-3 ARE5-3 ARE0-4 ARE5-4 Extended with transparent Without NO ARG4-0 3 ARG9-0 3 ARG4-0 4 ARG9-0 4 full guard (24mm dia.) NC ARG4-0 3 ARG9-0 3 ARG4-0 4 ARG9-0 4 NO+NC ARG4-3 ARG9-3 ARG4-4 ARG9-4 2NO+2NC ARG ARG With NO ARG4-0 3 ARG9-0 3 ARG4-0 4 ARG9-0 4 NC ARG4-0 3 ARG9-0 3 ARG4-0 4 ARG9-0 4 KKD05-64 NO+NC ARG4-3 ARG9-3 ARG4-4 ARG9-4 Extended with full guard Without NO ARG2-0 3 ARG7-0 3 ARG2-0 4 ARG7-0 4 (24mm dia. with openings) NC ARG2-0 3 ARG7-0 3 ARG2-0 4 ARG7-0 4 NO+NC ARG2-3 ARG7-3 ARG2-4 ARG7-4 2NO+2NC ARG ARG With NO ARG2-0 3 ARG7-0 3 ARG2-0 4 ARG7-0 4 NC ARG2-0 3 ARG7-0 3 ARG2-0 4 ARG7-0 4 AF NO+NC ARG2-3 ARG7-3 ARG2-4 ARG7-4 Extended with full guard Without NO ARG3-0 3 ARG8-0 3 ARG3-0 4 ARG8-0 4 (24mm dia.) NC ARG3-0 3 ARG8-0 3 ARG3-0 4 ARG8-0 4 NO+NC ARG3-3 ARG8-3 ARG3-4 ARG8-4 2NO+2NC ARG ARG With NO ARG3-0 3 ARG8-0 3 ARG3-0 4 ARG8-0 4 NC ARG3-0 3 ARG8-0 3 ARG3-0 4 ARG8-0 4 AF95-6 NO+NC ARG3-3 ARG8-3 ARG3-4 ARG8-4 Push-lock, turn-reset Without NO ARV5-0 3 ARV5-0 4 (40mm dia. with white NC ARV5-0 3 ARV5-0 4 arrow) NO+NC ARV5-3 ARV5-4 3NC ARV ARV With NO ARV5-0 3 ARV5-0 4 NC ARV5-0 3 ARV5-0 4 AF97-75 NO+NC ARV5-3 ARV5-4 Push-pull Without NO+NC ARQ7-3 ARQ7-4 (35mm dia.) With NO+NC ARQ7-3 ARQ7-4 AF96-85 Note: ee page /75 /74 Fuji Electric FA Components & ystems Co., td./d & C Catalog

18 Illuminated Pushbuttons AR ens color Replace the mark by the lens color code Color Green Red White Blue Yellow Orange Code G R W Y A Note: ARV5 type: Red, yellow only Contact arrangements Contact arrangements other than above are available Contact NO NC NO+NC 2NO 2NC 3NO arrangement Code Contact 3NC 2NO+2NC 4NO 4NC 5NO 5NC arrangement Code Note: ARQ7 type: NO + NC only Voltage Replace the mark by the lamp voltage code Transformer Code ED Incandescent Without transformer 6V DC 6 6V AC A 5.5V AC/DC 5 2V AC/DC B 5V AC/DC C C 20V AC/DC D 24V AC/DC E E With transformer 00-0V AC 5-27V AC V AC M M 2-254V AC Q Q V AC 400-0V AC T T 480V AC V V V AC W W Available numbers of contact blocks Operation Without transformer With transformer Momentary action 6-contact block 4-contact block Alternate action 3-contact block 2-contact block Push-lock, turn-reset Contact operation (ARQ7) Contact block Button position No. Pull Free () (2) NC NC Contact closed Push Position of contact block ARQ7 (without transformer) (2) () amp terminal Name plate side Operator ARQ7 (with transformer) (2) () Operator Transformer Name plate side Fuji Electric FA Components & ystems Co., td./d & C Catalog /75

19 Pushbuttons AR Pushbutton switches Operator Contact Momentary Alternate action action Flush round head NO ARF0R-0 ARF5R-0 NC ARF0R-0 ARF5R-0 NO+NC ARF0R- ARF5R- 2NO ARF0R-20 ARF5R-20 2NC ARF0R-02 ARF5R-02 AF95-2NO+2NC ARF0R-22 ARF5R-22 Extended round head NO ARE0R-0 ARE5R-0 NC ARE0R-0 ARE5R-0 NO+NC ARE0R- ARE5R- 2NO ARE0R-20 ARE5R-20 2NC ARE0R-02 ARE5R-02 AF95-0 2NO+2NC ARE0R-22 ARE5R-22 Flush round head NO ARFAR-0C ARFBR-0C symbol NC ARFAR-0C ARFBR-0C mark NO+NC ARFAR-C ARFBR-C type 2NO ARFAR-20C ARFBR-20C 2NC ARFAR-02C ARFBR-02C AF NO+2NC ARFAR-22C ARFBR-22C Extended round head NO AREAR-0C AREBR-0C symbol NC AREAR-0C AREBR-0C mark NO+NC AREAR-C AREBR-C type 2NO AREAR-20C AREBR-20C 2NC AREAR-02C AREBR-02C AF NO+2NC AREAR-22C AREBR-22C Mushroom head NO ARM0R-0 ARM5R-0 (40mm dia.) NC ARM0R-0 ARM5R-0 NO+NC ARM0R- ARM5R- 2NO ARM0R-20 ARM5R-20 2NC ARM0R-02 ARM5R-02 AF95-2 2NO+2NC ARM0R-22 ARM5R-22 Mushroom head NO ARM4R-0 (29mm dia.) NC ARM4R-0 NO+NC ARM4R- 2NO ARM4R-20 2NC ARM4R-02 AF95-8 2NO+2NC ARM4R-22 Extended with full NO ARGR-0 ARG6R-0 guard (24mm dia.) NC ARGR-0 ARG6R-0 NO+NC ARGR- ARG6R- 2NO ARGR-20 ARG6R-20 2NC ARGR-02 ARG6R-02 AF95-6 2NO+2NC ARGR-22 ARG8R-22 Operator Contact Momentary Alternate action action Extended with half NO ARG0R-0 ARG5R-0 guard NC ARG0R-0 ARG5R-0 NO+NC ARG0R- ARG5R- 2NO ARG0R-20 ARG5R-20 2NC ARG0R-02 ARG5R-02 AF95-9 2NO+2NC ARG0R-22 ARG5R-22 Pin lock NO ARGPR-0 NC ARGPR-0 NO+NC ARGPR- 2NO ARGPR-20 2NC ARGPR-02 AF NO+2NC ARGPR-22 Mushroom head with NO ARM3R-0 ARM8R-0 full guard (40mm dia.) NC ARM3R-0 ARM8R-0 NO+NC ARM3R- ARM8R- 2NO ARM3R-20 ARM8R-20 2NC ARM3R-02 ARM8R-02 AF95-7 2NO+2NC ARM3R-22 ARM8R-22 Mushroom head with NO ARGR-0 full guard (35mm dia. NC ARGR-0 metal nut) NO+NC ARGR- 2NO ARGR-20 2NC ARGR-02 AF NO+2NC ARGR-22 Giant head NO ARB0R-0 NC ARB0R-0 NO+NC ARB0R- 2NO ARB0R-20 2NC ARB0R-02 AF NO+2NC ARB0R-22 Giant head with guard NO ARBR-0 NC ARBR-0 NO+NC ARBR- 2NO ARBR-20 2NC ARBR-02 AF NO+2NC ARBR-22 Giant head with full NO ARB2R-0 guard NC ARB2R-0 NO+NC ARB2R- 2NO ARB2R-20 2NC ARB2R-02 AF NO+2NC ARB2R-22 Note: ee page /77 /76 Fuji Electric FA Components & ystems Co., td./d & C Catalog

20 Pushbuttons AR Operator Contact Momentary Alternate action action Giant head with full NO ARB3R-0 guard NC ARB3R-0 NO+NC ARB3R- 2NO ARB3R-20 2NC ARB3R-02 AF NO+2NC ARB3R-22 Push, turn-lock NO ARN0R-0 NC ARN0R-0 NO+NC ARN0R- 2NO ARN0R-20 2NC ARN0R-02 AF NO+2NC ARN0R-22 Operator Contact Momentary Alternate action action Push-lock, turn-reset NO ARV5R-0 (40mm dia. with white NC ARV5R-0 arrow) NO+NC ARV5R- 2NO ARV5R-20 2NC ARV5R-02 AF NO+2NC ARV5R-22 Pushbutton with NO ARFVR-0 emergency operating NC ARFVR-0 cap NO+NC ARFVR- 2NO ARFVR-20 2NC ARFVR-02 AF NO+2NC ARFVR-22 Button color Replace the mark by the button color code Color Green Red White Blue Yellow Orange Black Code G R W Y A B Note: ARV5R type: Red, yellow, black only Available numbers of contact blocks Momentary action Alternate action Push-lock, turn-reset 8-contact block 4-contact block Contact arrangements Contact arrangements other than above are available Contact NO NC NO+NC 2NO 2NC 3NO 3NC arrangement Code Contact 2NO+2NC 4NO 4NC 5NO 5NC 3NO+3NC 4NO+4NC arrangement Code ymbol mark (For ARFAR, FBR, EAR, EBR) Replace the mark by the symbol mark code ymbol mark I T I T Color of button White Black White Black White Black Clear Color of mark Red Green Green Black Code B B 2B Fuji Electric FA Components & ystems Co., td./d & C Catalog /77

21 Pushbuttons AR Operator Contact Button Contact operation (The following color contact is only available.) Contact block eft Right Mounting Free Depressed Free Depressed position Pushbutton with 2NO+2NC Green ARR-22G () NC selector ring Red ARR-22R (2-position) Black ARR-22B (2) NC White ARR-22W Yellow ARR-22Y (3) NO Orange ARR-22A Blue ARR-22 (4) NO AF NO Green AR2R-20G () NO Red AR2R-20R Black AR2R-20B (2) NO White AR2R-20W Yellow AR2R-20Y Orange AR2R-20A Blue AR2R-20 2NO+2NC Green AR2R-22G () NC Red AR2R-22R Black AR2R-22B (2) NC White AR2R-22W Yellow AR2R-22Y (3) NO Orange AR2R-22A Blue AR2R-22 (4) NO 2NO+2NC Green AR3R-22G () NC Red AR3R-22R Black AR3R-22B (2) NC White AR3R-22W Yellow AR3R-22Y (3) NO Orange AR3R-22A Blue AR3R-22 (4) NO 2NO+2NC Green AR6R-22G () NC Red AR6R-22R Black AR6R-22B (2) NC White AR6R-22W ocked Yellow AR6R-22Y (3) NO Orange AR6R-22A Blue AR6R-22 (4) NO Note: () to (4): Contact block mounting position Contact closed Contact open Position of contact block (3) (4) () (2) Operator Name plate side /78 Fuji Electric FA Components & ystems Co., td./d & C Catalog

22 Emergency top Pushbuttons AR Emergency stop pushbutton switches (Direct opening action), conform to EN48 Operator Contact Push-lock, turn-reset NC ARV0R-0R (oft-touch NO+NC ARV0R-R 40mm dia. with 2NC ARV0R-02R white arrow) AF NO+2NC ARV0R-22R Push-lock, turn-reset NC ARV2R-0R (40mm dia.) NO+NC ARV2R-R 2NC ARV2R-02R AF NO+2NC ARV2R-22R Push-lock, turn-reset NC ARVR-0R (oft-touch NO+NC ARVR-R 65mm dia. with 2NC ARVR-02R white arrow) AF NO+2NC ARVR-22R Push-lock, pull-reset NC ARQ2R-0R (35mm dia.) NO+NC ARQ2R-R 2NC ARQ2R-02R Note: Button color: Red only AF95-3 Contact arrangements Contact arrangements other than above are available Contact NO NO+NC 2NC 3NC 2NO+2NC arrangement Code Notes: Except ARQ2R For push-lock, pull-reset type, up to 2-contact block. 4NC Fuji Electric FA Components & ystems Co., td./d & C Catalog /79

23 Emergency top Illuminated Pushbuttons AR Emergency stop illuminated pushbutton switches (Direct opening action), conform to EN48 Operator Transformer Contact ED lamp Incandescent lamp Push-lock, turn-reset Without NC ARV0-0 3R ARV0-0 4R (oft-touch 40mm dia. NO+NC ARV0-3R ARV0-4R with white arrow) 2NC ARV0-02 3R ARV0-02 4R 3NC ARV0-03 3R ARV0-03 4R With NC ARV0-0 3R ARV0-0 4R NO+NC ARV0-3R ARV0-4R AF NC ARV0-02 3R ARV0-02 4R Push-lock, turn-reset Without NC ARV2-0 3R ARV2-0 4R (40mm dia.) NO+NC ARV2-3R ARV2-4R 2NC ARV2-02 3R ARV2-02 4R 3NC ARV2-03 3R ARV2-03 4R With NC ARV2-0 3R ARV2-0 4R NO+NC ARV2-3R ARV2-4R AF95-2 2NC ARV2-02 3R ARV2-02 4R Notes: Button color: Red only Contact arrangements indicated in the table can be supplied. Voltage Replace the mark by the lamp voltage code Transformer Code ED Incandescent Without 6V DC 6 6V AC A 5V AC/DC 5 2V AC/DC B 5V AC/DC C C 20V AC/DC D 24V AC/DC E E Transformer Code ED Incandescent With 00-0V AC 5-27V AC V AC M M 2-254V AC Q Q V AC 400-0V AC T T 480V AC V V V AC W W /80 Fuji Electric FA Components & ystems Co., td./d & C Catalog

24 elector witches AR elector switches 2-position Operator Operation Knob color or Contact Contact operation (Example) key removable witch with position round bezel Contact Operator position arrangement eft Right Knob Maintained Color code: NO ARPR-20B NO () Upper contact B: Black NC ARPR-20B (tandard) NO+NC ARPR-2B ➂ ➃ Color other than 2NO ARPR-220B above are 2NC ARPR-202B each 90 available 2NO+2NC ARPR-222B G: Green NC () Upper contact pring return R: Red NO ARPR-00B NC ARPR-00B ➀ ➁ NO+NC ARPR-0B 2NO ARPR-020B 2NC ARPR-002B AF NO+2NC ARPR-022B NO+NC Upper contact ever Maintained NO ARWR-20B () ➂ ➃ NC ARWR-20B NO+NC ARWR-2B 2NO ARWR-220B (2) ower contact 2NC ARWR-202B each 90 2NO+2NC ARWR-222B ➀ ➁ pring return NO ARWR-00B NC ARWR-00B 2NO+2NC Upper contact NO+NC ARWR-0B 2NO ARWR-020B () ➂ ➃ 2NC ARWR-002B AF NO+2NC ARWR-022B (3) ➂ ➃ Key Maintained : Key NO ARJ R-2 0( ) removable NC ARJ R-2 0( ) position NO+NC ARJ R-2 ( ) ower contact ( ): Key type 2NO ARJ R-2 20( ) 2NC ARJ R-2 02( ) (2) ➀ ➁ each 90 ee page /83 2NO+2NC ARJ R-2 22( ) pring return NO ARJ R-0A0( ) (4) ➀ ➁ NC ARJ R-0A0( ) NO+NC ARJ R-0A( ) 2NO ARJ R-0A20( ) 2NC ARJ R-0A02( ) AF NO+2NC ARJ R-0A22( ) Upper contact (3) (4) () (2) Operator ower contact Name plate side Notes: () to (4): Contact block mounting position ➀ ➁, ➂ ➃: Contact block terminal No. Contact arrangements: ee page /83 Contact closed Operator Replace the mark by the cylinder key type code tandard type: Blank ong durability type: A Fuji Electric FA Components & ystems Co., td./d & C Catalog /8

25 elector witches AR 3-position Operator Operation Knob color Contact Contact operation (Example) witch with round bezel Contact Operation position arrangement C R C R Knob Maintained Color code: NO+NC ARPR-3B NO+NC Upper contact ower contact B: Black 2NO ARPR-320B ➂ ➀ each 45 (tandard) 2NC ARPR-2B () (2) Color other than 2NO+2NC ARPR-322B ➃ ➁ above are pring/manual available NO+NC ARPR-6B return G: Green 2NO ARPR-620B R: Red 2NC ARPR-602B each 45 2NO+2NC ARPR-622B pring/manual NO+NC ARPR-7B NO+NC Upper contact ower contact return 2NO ARPR-720B ➂ ➀ 2NC ARPR-702B () (2) each 45 2NO+2NC ARPR-722B ➃ ➁ pring return 2NO+2NC ARPR-22B 2NO+2NC Upper contact ower contact AF95-3 ➀ ➀ () (2) ➁ ➁ ➂ ➂ each 45 (3) (4) ➃ ➃ ever Maintained NO+NC ARWR-3B NO+NC Upper contact ower contact 2NO ARWR-320B ➂ ➀ each 45 2NC ARWR-2B () (2) 2NO+2NC ARWR-322B ➃ ➁ AF95-4 pring/manual NO+NC ARWR-6B return 2NO ARWR-620B 2NC ARWR-602B each 45 2NO+2NC ARWR-622B pring/manual NO+NC ARWR-7B NO+NC Upper contact ower contact return 2NO ARWR-720B ➂ ➀ 2NC ARWR-702B () (2) each 45 2NO+2NC ARWR-722B ➃ ➁ pring return 2NO+2NC ARWR-22B 2NO+2NC Upper contact ower contact ➀ ➀ () (2) ➁ ➁ ➂ ➂ each 45 (3) (4) ➃ ➃ Note: Contact arrangements: ee page /83 Contact closed /82 Fuji Electric FA Components & ystems Co., td./d & C Catalog

26 elector witches AR Operator Operation Key removable Contact Contact operation (Example) position witch with round bezel Contact Operator position arrangement C R C R Key Maintained : Key NO+NC ARJ R-3 ( ) NO+NC Upper contact ower contact removable 2NO ARJ R-3 20( ) ➂ ➀ each 45 position 2NC ARJ R-3 02( ) () (2) ( ): Key type 2NO+2NC ARJ R-3 22( ) ➃ ➁ pring/manual NO+NC ARJ R-6 ( ) return 2NO ARJ R-6 20( ) 2NC ARJ R-6 02( ) each 45 2NO+2NC ARJ R-6 22( ) pring/manual NO+NC ARJ R-7 ( ) NO+NC Upper contact ower contact return 2NO ARJ R-7 20( ) ➂ ➀ 2NC ARJ R-7 02( ) () (2) each 45 2NO+2NC ARJ R-7 22( ) ➃ ➁ pring return 2NO+2NC ARJ R-E22( ) 2NO+2NC Upper contact ower contact ➀ ➀ AF95-5 () (2) ➁ ➁ each 45 ➂ ➂ (3) (4) ➃ ➃ Notes: Operator position : eft, C: Center, R: Right Contact closed () to (4): Contact block mounting position ➀ ➁, ➂ ➃: Contact block terminal No. Contact arrangements Contact arrangements other than above are available Contact NO NC NO+NC 2NO 2NC 3NO 3NC arrangement Code Available numbers of contact blocks Mainted pring return pring/manual return 8-contact block 4-contact block Contact 2NO+2NC 4NO 4NC 5NO 5NC 3NO+3NC 4NO+4NC arrangement Code Key removable positions Code A B C D E F G Position of contact block Upper contact Removable position ARJ R-2 ARJ R-0 ARJ R-3 ARJ R-6 ARJ R-7 ARJ R (3) () (4) (2) ower contact Name plate side Operator : Available : Not available Key code No. Replace the ( ) mark with one of the following key code. A, B, C, D, E and F tandard key code is A. Operator Replace the mark by the cylinder key type code tandard type: Blank ong durability type: A Fuji Electric FA Components & ystems Co., td./d & C Catalog /83

27 elector witches AR elector switches (control type) 3-position Operator Operation Knob color or Contact key removable arrangement witch with position round bezel Knob Maintained Color code: Replace the ARPCR-3 B each 45 B: Black (tandard) mark by the contact arrangement code pring/manual Color other than (shown on next page). ARPCR-6 B return above are each 45 available pring/manual G: Green ARPCR-7 B return each 45 R: Red pring return ARPCR- B AF each 45 ever Maintained Replace the ARWCR-3 B each 45 mark by the contact arrangement code pring/manual (shown on next page). ARWCR-6 B return each 45 pring/manual ARWCR-7 B return each 45 pring return ARWCR- B KK02-40A each 45 Key Maintained Replace the Replace the ARJCR-3 ( ) each 45 mark by the mark by the contact key removable arrangement code pring/manual position code: (shown on next page). ARJCR-6 ( ) return each 45 A, B, C, D, E F or G pring/manual ARJCR-7 ( ) return each 45 pring return ARJCR-E ( ) AF each 45 Key removable positions Code A B C D E F G Removable position Key code No. Replace the ( ) mark with one of the following key code. A, B, C, D, E and F tandard key code is A. ARJCR-3 ARJCR-6 ARJCR-7 ARJCR- : Available : Not available /84 Fuji Electric FA Components & ystems Co., td./d & C Catalog

28 elector witches AR Contact arrangement code (Typical example) Contact Contact Contact operation arrange- arrangement ment Contact block Operator position code Mounting eft Center Right position Contact Contact Contact operation arrange- arrangement ment Contact block Operator position code Mounting eft Center Right position 2NC 0F () NC (2) NC 2NO+2NC () NC (2) NC (3) NO (4) NO 4NC 0J () NC (2) NC (3) NC (4) NC 2NO+2NC 024 () NC 2NO+2NC 03C* () NC (Maintained only) (2) NC (3) NO (4) NO (2) NC (3) NO (4) NO 2NO+2NC 4* () NC (2) NC (3) NO (4) NO 2NO+2NC 054 () NC (2) NC (3) NO (4) NO Notes: : Contact closed Blank: Contact open * There may be some overlap in the contact when switching between notches. 2NO+2NC 064 () NC (2) NC (3) NO NO+NC 07F () NC 2NO+2NC 07C* () NC (Maintained only) (4) NO (2) NO (2) NC (3) NO (4) NO 2NO+2NC 084 () NC (2) NC (3) NO (4) NO 2NO+2NC 094* () NC (2) NC (3) NO (4) NO 2NO+2NC () NC (2) NC (3) NO (4) NO 2NO+2NC C* () NC (Maintained only) (2) NC (3) NO (4) NO Position of contact block (3) (4) () (2) Operator Name plate side Fuji Electric FA Components & ystems Co., td./d & C Catalog /85

29 elector witches AR Contact arrangement code (Typical example) Contact Contact Contact operation arrange- arrangement ment Contact block Operator position code Mounting eft Center Right position Contact Contact Contact operation arrange- arrangement ment Contact block Operator position code Mounting eft Center Right position 2NO+2NC 24* () NC (2) NC (3) NO (4) NO 2NO+2NC 34* () NC (2) NC (3) NO (4) NO 3NO+NC 4D* () NO (Maintained only) (2) NC (3) NO (4) NO 3NO+NC 5A* () NO (2) NC (3) NO (4) NO 2NO+2NC 64 () NC (2) NC (3) NO (4) NO 2NO+2NC 74* () NC (2) NC (3) NO (4) NO 2NO+2NC 84 () NC (2) NC (3) NO (4) NO 2NO+2NC 94 () NC (2) NC (3) NO (4) NO 4NO 20B () NO (2) NO (3) NO (4) NO Notes: : Contact closed Blank: Contact open * There may be some overlap in the contact when switching between notches. Position of contact block (3) (4) () (2) Operator Name plate side /86 Fuji Electric FA Components & ystems Co., td./d & C Catalog

30 elector witches AR 4, 5-position Operator Contact Operation Knob color Contact arrangement witch with round bezel Knob 2NO+2NC 4-position Color code: Replace the ARPCR-4 B B: Black maintained mark by the contact (tandard) Color other than arrangement code above are (shown below) 5-position available ARPCR-5 B maintained G: Green R: Red AF (The following contact is only available.) ever 2NO+2NC 4-position ARWCR-4 B maintained KK02-40A 5-position maintained ARWCR-5 B Contact arrangement code Position Contact Contact Contact operation arrange- arrangement ment Contact block Operator position code Mounting position position 2NO+2NC 4C* (Maintained () NC only) (2) NC Position of contact block (3) () Operator (4) (2) Name plate side (3) NO (4) NO 5-position 2NO+2NC 5C* (Maintained () NC only) (2) NC Operator position 4-position 5-position 40 (3) NO (4) NO Notes: : Contact closed * There may be some overlap in the contact when switching between notches. Fuji Electric FA Components & ystems Co., td./d & C Catalog /87

31 Illuminated elector witches AR Illuminated selector switches 2-position Operator Operation Contact ED lamp Incandescent lamp Transformer Transformer Knob Maintained NO Without ARP-20 3 Without ARP-20 4 NC ARP-20 3 ARP-20 4 NO+NC ARP-2 3 ARP-2 4 2NO+2NC ARP ARP NO With ARP-20 3 With ARP-20 4 each 90 NC ARP-20 3 ARP-20 4 NO+NC ARP-2 3 ARP-2 4 2NO ARP ARP pring return NO Without ARP-00 3 Without ARP-00 4 NC ARP-00 3 ARP-00 4 NO+NC ARP-0 3 ARP-0 4 2NO ARP ARP AF95-5 NO With ARP-00 3 With ARP NC ARP-00 3 ARP-00 4 NO+NC ARP-0 3 ARP-0 4 2NO ARP ARP position Operator Operation Contact ED lamp Incandescent lamp Transformer Transformer Knob Maintained NO+NC Without ARP-3 3 Without ARP-3 4 2NO+2NC ARP ARP each 45 NO+NC With ARP-3 3 With ARP-3 4 pring/manual NO+NC Without ARP-6 3 Without ARP-6 4 return NO+NC With ARP-6 3 With ARP-6 4 AF95-5 Note:, ee page /89 each 45 NO+NC Without ARP-7 3 Without ARP-7 4 NO+NC With ARP-7 3 With ARP-7 4 /88 Fuji Electric FA Components & ystems Co., td./d & C Catalog

32 Illuminated elector witches AR Replace the mark by the following lamp voltage code Transformer Voltage Code ED Incandescent Without 5V AC/DC 5 6V DC 6 6V AC A 2V AC/DC B 5V AC/DC C C 20V AC/DC D 24V AC/DC E E With 00-0V AC 5-27V AC V AC M M 2-254V AC Q Q V AC 400-0V AC T T 480V AC V V V AC W W Replace the mark by the following knob color code Color Green Red White Blue Yellow Orange Code G R W Y A Up to 4-contact of contact arrangement can be made. Available numbers of contacts are as follow. No. of Operation Without With position transformer transformer 2-position Maintained 6-contact 4-contact pring return 3-contact 2-contact 3-position Maintained 6-contact 4-contact pring/manual return 3-contact 2-contact Contact arrangement and operator position 2-position Transformer Contact Contact block Operator position arrangement Mounting eft Right position 3-position Transformer Contact Contact block Operator position arrangement Mounting eft Center Right position With/without NO () NO With/without NC () NC Without NO+NC () NO (2) NC With NO+NC () NC (2) NO With/without 2NO () NO (2) NO Without 2NO+2NC () NO * (2) NC (3) NO (4) NC With 2NO+2NC () NC * (2) NC Notes: * : ARP-2 : Contact closed, (3) NO (4) NO : Contact open Without NO+NC () NO * (2) NC NO+NC () NO * 2 (2) NC 2NO+2NC () NO * 3 (2) NC (3) NO (4) NC With NO+NC () NC * (2) NO NO+NC () NC * 2 (2) NO 2NO+2NC () NC * 3 (2) NC Notes: * : ARP-3, 6 * 3 : ARP-3 * 2 : ARP-7 : Contact closed, : Contact open (3) NO (4) NO Position of contact block Without transformer With transformer (3) () (4) (3) (2) () (4) (2) amp terminal Name plate side Transformer Name plate side Fuji Electric FA Components & ystems Co., td./d & C Catalog /89

33 Pilot ights DR Pilot lights/standard ens Transformer ED lamp Incandescent lamp amp voltage amp voltage Dome Without 6V AC DRD0-A3 5.5V AC/DC DRD0-54 6V DC DRD0-63 2V AC/DC DRD0-B3 5V AC/DC DRD0-C4 24V AC/DC DRD0-E3 24V AC/DC DRD0-E4 AF95-8 With 000V AC DRD V AC DRD V AC DRD0-M V AC DRD0-M4 Dome With resistor 50V DC DRD0-FR 50V DC DRD0-FQ 0V DC DRD0-R 220V DC DRD0-MR AF Dome With resistor 0V DC DRD0-Q 220V DC DRD0-MQ AF Extended round Without 6V AC DRE3-A3 5.5V AC/DC DRE3-54 6V DC DRE3-63 2V AC/DC DRE3-B3 5V AC/DC DRE3-C4 24V AC/DC DRE3-E3 24V AC/DC DRE3-E4 AF95-20 With 000V AC DRE V AC DRE V AC DRE3-M V AC DRE3-M4 Faceted Without 6V AC DRK0-A3 5.5V AC/DC DRK0-54 6V DC DRK0-63 2V AC/DC DRK0-B3 5V AC/DC DRK0-C4 24V AC/DC DRK0-E3 24V AC/DC DRK0-E4 AF95-9 With 000V AC DRK V AC DRK V AC DRK0-M V AC DRK0-M4 Faceted With resistor 50V DC DRK0-FR 50V DC DRK0-FQ 0V DC DRK0-R 220V DC DRK0-MR AF Faceted With resistor 0V DC DRK0-Q 220V DC DRK0-MQ AF97-67 Dome with dimmer control Without 6V AC DRD-A3 5.5V AC/DC DRD-54 6V DC DRD-63 2V AC/DC DRD-B3 5V AC/DC DRD-C3 5V AC/DC DRD-C4 24V AC/DC DRD-E3 24V AC/DC DRD-E4 KK02-A With 00V0V AC DRD-3 00V0V AC DRD-4 200V220V AC DRD-M3 200V220V AC DRD-M4 Note: ee page /9 /90 Fuji Electric FA Components & ystems Co., td./d & C Catalog

34 Pilot ights DR Pilot lights/short-body with transformer ens ED lamp Incandescent lamp amp voltage amp voltage Dome 000V AC DRD V AC DRD V AC DRD0-M V AC DRD0-M8 KK02-4A Extended round 000V AC DRE V AC DRE V AC DRE3-M V AC DRE3-M8 KK02-42A Faceted 000V AC DRK V AC DRK V AC DRK0-M V AC DRK0-M8 KK02-43A ens color Replace the mark by the following lens color code Color Code Green G Red R White W Blue Yellow Y Orange A amp voltage Available lamp voltage are as follow. Description Without transformer With transformer With resistor unit With resistor Voltage 5.5V AC/DC 6V AC 6V DC 2V AC/DC 5V AC/DC 20V AC/DC 24V AC/DC 00-0V AC 5-27V AC V AC 2-254V AC V AC 400-0V AC 480V AC V AC 0V DC 50V DC 0V DC 220V DC Code tandard type ED A3 63 B3 C3 E3 3 3 M3 Q3 3 T3 V3 W3 7 FR R MR Incandescent 54 C4 D4 E4 4 4 M4 Q4 4 T4 V4 W4 FQ Q MQ Code hort-body type ED 9 9 M9 Incandescent 8 8 M8 Fuji Electric FA Components & ystems Co., td./d & C Catalog /9

35 Pilot ights DR Pilot lights/standard ens Transformer ED unit Incandescent lamp amp voltage amp voltage Flush square (34mm sq. Without 6V DC DRF4M V AC/DC DRF4M-54 transparent 5V AC/DC DRF4M-C5 5V AC/DC DRF4M-C4 lens) 24V AC/DC DRF4M-E5 24V AC/DC DRF4M-E4 AF97-65 With 000V AC DRF4M-5 000V AC DRF4M V AC DRF4M-M V AC DRF4M-M4 Flush rectangular Without 6V DC DRF4N V AC/DC DRF4N-54 (Transparent 5V AC/DC DRF4N-C5 5V AC/DC DRF4N-C4 lens) 24V AC/DC DRF4N-E5 24V AC/DC DRF4N-E4 AF97-6 With 000V AC DRF4N-5 000V AC DRF4N V AC DRF4N-M V AC DRF4N-M4 Flush square (40mm sq. Without 6V DC DRM4M V AC/DC DRM4M-54 transparent 5V AC/DC DRM4M-C5 5V AC/DC DRM4M-C4 lens) 24V AC/DC DRM4M-E5 24V AC/DC DRM4M-E4 AF97-63 With 000V AC DRM4M-5 000V AC DRM4M V AC DRM4M-M V AC DRM4M-M4 Color plate Replace the mark by the following color plate color code Color Code Green G Red R Note: * Incandescent lamp only White W Blue* Yellow Y Orange A amp voltage Available lamp voltage are as follow. Description Without transformer With transformer With resistor unit Voltage 5.5V AC/DC 6V AC 6V DC 2V AC 2V AC/DC 5V AC/DC 20V AC/DC 24V AC/DC 00-0V AC 5-27V AC V AC 2-254V AC V AC 400-0V AC 480V AC V AC 0V DC Code tandard type ED A B5 C5 E5 5 5 M5 Q5 5 T5 V5 W5 E Incandescent 54 C4 D4 E4 4 4 M4 Q4 4 T4 V4 W4 /92 Fuji Electric FA Components & ystems Co., td./d & C Catalog

36 Joy tick elector witches AR Joy stick selector switches andle Terminal Operating directions Contact arrangement Manual return pring return Ball type without lock crew NO 2 ARA0N-A0A0B ARA5N-A0A0B NO + NC 2 ARA0N-00B ARA5N-00B NO 4 ARA0N-AAAAB ARA5N-AAAAB NO + NC 4 ARA0N-B ARA5N-B older/tab NO + NC 2 ARA0-00B ARA5-00B 2NO + 2NC 2 ARA0-2020B ARA5-2020B AF97-48 NO + NC 4 ARA0-B ARA5-B 2NO + 2NC 4 ARA0-2222B ARA5-2222B Ball type with lock crew NO 2 ARAN-A0A0B ARA6N-A0A0B AF97- NO + NC 2 ARAN-00B ARA6N-00B NO 4 ARAN-AAAAB ARA6N-AAAAB NO + NC 4 ARAN-B ARA6N-B older/tab NO + NC 2 ARA-00B ARA6-00B 2NO + 2NC 2 ARA-2020B ARA6-2020B NO + NC 4 ARA-B ARA6-B 2NO + 2NC 4 ARA-2222B ARA6-2222B Rubber cap type crew NO 2 ARA2N-A0A0B ARA7N-A0A0B without lock NO + NC 2 ARA2N-00B ARA7N-00B NO 4 ARA2N-AAAAB ARA7N-AAAAB NO + NC 4 ARA2N-B ARA7N-B older/tab NO + NC 2 ARA2-00B ARA7-00B 2NO + 2NC 2 ARA2-2020B ARA7-2020B NO + NC 4 ARA2-B ARA7-B AF97-57 Operating direction Directions other than those shown in the table above can be provided. For types ARA N B, designate the contact arrangement codes for the necessary operating directions ( : Upper, 2 : Right, 3 : ower, 4 : eft). Designate "0" for unnecessary directions. Upper 2NO + 2NC 4 ARA2-2222B ARA7-2222B Contact arrangement Contact arrangement Manual return crew pring return older/tab pring/manual return are also available, contact FUJI. NO NC NO+NC 2NO 2NC 2NO+2NC 0 0 A B D E 2 4 eft 2 Right 3 ower Fuji Electric FA Components & ystems Co., td./d & C Catalog /93

37 Buzzers DR Buzzers ound Electronic sound Electronic sound (economy) AF96-38 Description ED operation indicator (Red) Intermittent/continuous sound selection ound level: 90dB (0.m) 70dB (m) ound level: 90dB (0.m) 70dB (m) Transformer Without With With resistor unit Without With Operating voltage 6V AC 6V DC 2 to 24V AC/DC 35 to 48V AC/DC 00 to 0V AC 200 to 220V AC 00 to 0V DC 6V DC 24V AC 24V DC 00 to 0V AC 200 to 220V AC DRB5-AB DRB5-6B DRB5-EB DRB5-FB DRB5-B DRB5-MB DRB5-B DRB6-6B DRB6-GB DRB6-EB DRB6-B DRB6-MB KK02-45A Magnetic sound ound level: 90dB (0.m) 70dB (m) Without 00 to 0V AC 200 to 220V AC DRB0-B DRB0-MB Electronic sound (IP54) Notes: AF96-8 AF Intermittent/continuous sound selection ound level: 80dB (0.m) 60dB (m) Intermittent/continuous sound selection (DRB5, B8) ee the "hort-circuit terminal" in the dimensions diagram on the /07. page, and select as follows: hort-circuit terminal mounted Intermittent sound hort-circuit terminal not mounted Continuous sound Without With With resistor unit 6V AC 6V DC 2 to 24V AC/DC 35 to 48V AC/DC 00 to 0V AC 200 to 220V AC 00 to 0V DC DRB8-AB DRB8-6B DRB8-EB DRB8-FB DRB8-B DRB8-MB DRB8-B /94 Fuji Electric FA Components & ystems Co., td./d & C Catalog

38 Numerical Indicators DR Numerical indicators Display One-digit Two-digit KK02-55B KK02-56B Terminal oldering terminal oldering terminal with connector With right angle connector ocket FCN-723J00/ Contact block FCN-723J-AU/Q (Fujitsu component) oldering terminal oldering terminal with connector With right angle connector ocket FCN-723J020/2 Contact block FCN-723J-AU/Q (Fujitsu component) Input logic Negative Positive Negative Positive Negative Positive Negative Positive Negative Positive Negative Positive Operating voltage 2V DC 24V DC 2V DC 24V DC 2V DC 24V DC 2V DC 24V DC 2V DC 24V DC 2V DC 24V DC 2V DC 24V DC 2V DC 24V DC 2V DC 24V DC 2V DC 24V DC 2V DC 24V DC 2V DC 24V DC DRN-NB DRN-NE DRN-PB DRN-PE DRN-NB C DRN-NE C DRN-PB C DRN-PE C DRN-NB R DRN-NE R DRN-PB R DRN-PE R DRN2-NB DRN2-NE DRN2-PB DRN2-PE DRN2-NB C DRN2-NE C DRN2-PB C DRN2-PE C DRN2-NB R DRN2-NE R DRN2-PB R DRN2-PE R uminous color Replace the mark by the luminous color code R: Red G: Green Notes: Right-angle connector and mounting screws included. Terminal dimensions, arrangement, and input conditions: ee page /08. Input specifications Wiring diagrams One-digit Two-digit Voltage stabilizer circuit VDD Decoder circuit Voltage stabilizer circuit Input circuit VDD A B C D E D.P 0V BCD Code Decoder circuit Decoder circuit Input circuit Input circuit A B C D E D.P A B C D E D.P 0V BCD Code BCD Code Fuji Electric FA Components & ystems Co., td./d & C Catalog /95

39 /96 Fuji Electric FA Components & ystems Co., td./d & C Catalog Numerical Indicators DR Truth value chart Display Extinguish Extinguish Extinguish Extinguish Extinguish Extinguish atch Positive logic D C B A.E Negative logic D C B A.E Note: Operates independently from the and signals. BCD input voltage 2V 0 to V 9 to 5V 24V 0 to 2V 2 to V Input current Positive logic Negative logic 2mA max. 4mA max. Application to PC Input logic Negative logic Positive logic Output from PC Transistor output (source) PNP Transistor output (sink) NPN Note: Available, not available Terminal symbol.e (atch Enable): olds the last entry when the positive logic type goes to () and the negative logic type goes to (). D.P (Decimal Point): Displays a decimal point when the positive logic type goes to () and the negative logic type goes to ().

40 Pushbuttons/electors/Pilot ights/buzzers AR and DR Dimensions Dimensions, mm Illuminated pushbuttons Extended With transformer Without transformer ARE0, E5 ø ARE0, E5 ø * Transformer * ø4 amp terminal ø4 Extended with transparent full guard (24mm dia.) Extended with full guard (24mm dia. with openings) ARG4, G9 ø ARG2, G7 ø24 amp terminal Guard ring ø4 amp terminal ø4 Extended with full guard (24mm dia.) ARG3, G8 ø24 amp terminal ø4 Note: * Except for the types 0V AC, 27V AC and 220V AC. Fuji Electric FA Components & ystems Co., td./d & C Catalog /97

41 Pushbuttons/electors/Pilot ights/buzzers AR and DR Dimensions Dimensions, mm Illuminated pushbuttons Push-lock, turn-reset (40mm dia. with white arrow) With transformer Without transformer ARV5 ø ARV5 ø8 Push-pull With transformer Without transformer * 24.5 * Transformer * ø40 ø4 amp terminal ø40 ø4 ARQ7 ARQ7 Transformer * ø39 4sq. amp terminal ø39 4sq. Note: * Except for the types 0V AC, 27V AC and 220V AC. /98 Fuji Electric FA Components & ystems Co., td./d & C Catalog

42 Pushbuttons/electors/Pilot ights/buzzers AR and DR Dimensions Dimensions, mm Pushbuttons Flush/Extended Mushroom (40mm dia.) (Extended).5(Flush) ARF0R, F5R, FAR, FBR, E0R, E5R, EAR, EBR ø ARM0R, M5R ø4 ø40 ø4 Mushroom (29mm dia.) Extended with full guard (24mm dia.) ARM4R ø ARGR, G6R ø24 ø4 ø4 Extended with half guard Pin lock ARG0R, G5R ø Pin ARGPR 4sq. ø4 ø23.4 Note: The enclosed pin can be inserted to lock the pushbutton in a pushed or not pushed state. Mushroom with full guard (40mm dia.) Mushroom with full guard (35mm dia. metal nut) ARM3R, M8R ARGR Guard ring ø40 ø50 Guard ring ø.5 Fuji Electric FA Components & ystems Co., td./d & C Catalog /99

43 Pushbuttons/electors/Pilot ights/buzzers AR and DR Dimensions Dimensions, mm Pushbuttons Giant Giant with guard ARBR Terminal cover ARB0R Terminal cover sq. 4sq. ø65 Guard ring ø65 ø75 Giant with full guard ARB2R Giant with full guard ARB3R Terminal cover sq. Terminal cover sq. Guard ring ø65 ø75 Guard ring ø65 ø75 Pushbutton with selector ring (2-position) Push, turn-lock ARR, 2R, 3R, 6R ø ARN0R 4sq. ø24 ø4 ø40 Note: When the push button is pressed in the left position, it resets automatically (momentary operation). When pressed and turned to the right it locks, and to the left it resets. Push-lock, turn-reset (40mm dia. with white arrow) Emergency operating cap ARV5R ø Cap (AX539-) ARFVR ø24.5 ø40 ø4 ø4 Note: This is pushbutton switch is operated while holding the cap with the fingertips. The cap (AX539-) can be exchanged. /00 Fuji Electric FA Components & ystems Co., td./d & C Catalog

44 Pushbuttons/electors/Pilot ights/buzzers AR and DR Dimensions Dimensions, mm Emergency stop pushbuttons Push-lock, turn-reset (40mm dia.) Push-lock, turn-reset (65mm dia. with white allow) * ARV0R, V2R ø ARVR ø40 Note: * ARV2R type ø4 ø4 ø65 Push-lock, pull-reset (35mm dia.) ARQ2R ø4 Emergency stop illuminated pushbuttons Push-lock, turn-reset (40mm dia.) With transformer Without transformer ARV0, V ARV0, V * * ø8 2.5 ø * Transformer 6.5 ø40 amp terminal ø * ø4 ø4 Notes: * Except for the types 0V AC, 27V AC and 220V AC. * 2 ARV2 type Fuji Electric FA Components & ystems Co., td./d & C Catalog /0

45 Pushbuttons/electors/Pilot ights/buzzers AR and DR Dimensions Dimensions, mm elector switches Knob ever Terminal cover ARPR, PCR ø24 Terminal cover ARWR, WCR ø24 27 ø4 ø4 Key Terminal cover ARJR, JCR, JAR ø4 Illuminated selector switches Knob With transformer Without transformer ARP ARP ø24 20 ø * Transformer 60 64* ø4 amp terminal ø4 Notes: * Except for the types 0V AC, 27V AC and 220V AC. /02 Fuji Electric FA Components & ystems Co., td./d & C Catalog

46 Pushbuttons/electors/Pilot ights/buzzers AR and DR Dimensions Dimensions, mm Pilot lights Dome With transformer, with resistor unit Without transformer * DRD0 Transformer With resistor ED, incandecent (50V DC) * 2 With resistor 99.5 Incandescent (0, 220V DC) 25 ø24 ø4 DRD0 60 Terminal screw M4 Terminal screw M4 ø24 hort-body / with transformer DRD0 4sq. ø24 ø4 Extended With transformer, with resistor unit * Without transformer 33 5 DRE3 Transformer egend plate ø9.7 egend plate ø9.7 ø24 ø4 hort-body / with transformer 38 5 DRE3 egend plate ø9.7 ø24 ø4 Notes: * Except for the types 0V AC, 27V AC and 220V AC. * 2 Incandecent (50V DC) type only Fuji Electric FA Components & ystems Co., td./d & C Catalog /03

47 Pushbuttons/electors/Pilot ights/buzzers AR and DR Dimensions Dimensions, mm Pilot lights Faceted With transformer, with resistor unit Without transformer * DRK0 Transformer ø24 ø4 With resistor ED, incandescent (50V DC) With resistor ED, incandescent (0, 220V DC) * DRK0 60 Terminal screw M4 Terminal screw M4 ø24 4sq. hort-body / with transformer DRK0 ø24 ø4 Dome with dimmer control 68 * 3 33 * 4 32 DRD Transformer Rotating ring ø24 ø4 Notes: * Except for the types 0V AC, 27V AC and 220V AC. * 2 Incandecent (50V DC) type only * 3 With transformer, with resistor unit type only * 4 For without transformer types, add mm when mounting the terminal cover. / Fuji Electric FA Components & ystems Co., td./d & C Catalog

48 Pushbuttons/electors/Pilot ights/buzzers AR and DR Dimensions Dimensions, mm Pilot lights Flush square (34mm sq. transparent lens) With transformer, with resistor unit 6 65 * 2 Without transformer 32 2 DRF4M Transformer egend plate egend plate sq. 34 sq. Flush rectangular (Transparent lens) With transformer, with resistor unit * Without transformer 32 2 DRF4N Transformer egend plate egend plate 34 Flush square (40mm sq. transparent lens) With transformer, with resistor unit * Without transformer 32 2 DRM4M Transformer egend plate egend plate 36 sq. 40 sq. Note: * Except for the types 0V AC, 27V AC and 220V AC. Fuji Electric FA Components & ystems Co., td./d & C Catalog /05

49 Pushbuttons/electors/Pilot ights/buzzers AR and DR Dimensions Dimensions, mm Joy stick selector switches Ball type (without lock) ARA0N, A5N: crew terminal Nameplate side Direction [4] ø25 20 Direction [2] Approx. 70 [] 20 Direction [] [4] [3] sq. Direction [3] 68.5 [2] ø4 Approx. 80 Ball type with lock ARAN, A6N: crew terminal ock piece* Nameplate side Direction [4] ø25 20 Direction [2] Direction [3] 68.5 Approx. 70 [] 20 Direction [] [4] [2] [3] sq. Approx. 80 ø4 Notes * The contact arrangement is operable in the designated direction by pulling the lock piece in the central position with the fingers. The lock piece will return automatically and locks when the lock piece is released in the central position. The lock piece locks in the central position only. Rubber cap type (without lock) ARA2N, A7N: crew terminal Nameplate side [] Direction [4] 20 Direction [2] Direction [3] older/tab terminal: ARA 68.5 Approx. 76 ø0 20 Approx. 60 Direction [] [2] [4] [3] sq. ø4 older/tab terminal 53.5 /06 Fuji Electric FA Components & ystems Co., td./d & C Catalog

50 Pushbuttons/electors/Pilot ights/buzzers AR and DR Dimensions Dimensions, mm Buzzers Electronic sound With transformer DRB5, B6 Without transformer DRB5, B6 Transformer ø20.5 ED lamp * 2 (Red).5 amp terminal ø20.5 ED lamp * 2 (Red) hort-circuit terminal * ø4 hort-circuit terminal * ø4 Magnetic sound 54 3 DRB0 ø24 46 sq. Electronic sound (IP54) With transformer Without transformer Transformer * 3 DRB8 amp terminal * 3 DRB ø24 ø24 hort-circuit terminal * ø4 hort-circuit terminal * ø4 Notes: * There are no short-circuit terminals with DRB6. (Continuous sound only) * 2 There are no ED lamps with DRB6. * 3 The nut and cap are united with DRB8. Fuji Electric FA Components & ystems Co., td./d & C Catalog /07

51 Pushbuttons/electors/Pilot ights/buzzers AR and DR Dimensions Dimensions, mm Numerical indicators One-digit DRN Two-digit DRN sq. 3sq sq. 3sq Terminals older terminal One-digit, two-digit Connector (plug: Fujitsu component FCN-365P06-AU) Terminal ø0.8 older terminal with connector One-digit, two-digit Terminal No.A 0.8 Terminal No.A Connector (jack: Fujitsu component FCN-36J06-AU) Mounting screw 8.25 Terminal No.B Terminal No.B8 8 Input conditions One-digit VDD 22 VDD 2 2 NC 20 3 C NC 9 4 B NC 8 5 E NC 7 6 D.P NC 6 7 D NC 5 8 A 4 9 0V 3 0 0V 0V 2 0V One-digit NC A B VDD NC A2 B2 C NC A3 B3 B NC A4 B4 E NC A5 B5 D.P NC A6 B6 D 0V A7 B7 A NC A8 B8 NC Two-digit 0 C A B VDD B A2 B2 C 0 0 E A3 B3 B D.P A4 B4 E D A5 B5 D.P A A6 B6 D 0V A7 B7 A NC A8 B8 NC 8 Two-digit VDD 22 VDD C 20 3 C 0 0 B 9 4 B E 8 5 E D.P 7 6 D.P D 6 7 D A 5 8 A 4 9 0V 3 0 0V 0V 2 0V With right angle connector One-digit Two-digit Connector (Fujitsu component FCN-725P00-AU/) Connector (Fujitsu component FCN-725P020-AU/W) ocket (Fujitsu component FCN-723J00/) F Contact (Fujitsu component FCN-723J-AU/Q) ocket (Fujitsu component FCN-723J020/2) Contact (Fujitsu component FCN-723J-AU/Q) One-digit VDD 22 VDD 2 2 NC 20 3 C NC 9 4 B NC 8 5 E NC 7 6 D.P NC 6 7 D NC 5 8 A 4 9 0V 3 0 0V Two-digit VDD 22 VDD C 20 3 C 0 0 B 9 4 B E 8 5 E D.P 7 6 D.P D 6 7 D A 5 8 A 4 9 0V 3 0 0V Note: VDD: Input voltage 2V or 24V NC: No connect /08 Fuji Electric FA Components & ystems Co., td./d & C Catalog

52 Pushbuttons/electors/Pilot ights AR and DR Notes on use Notes on use Panel cutout hole Fig. Panel cutout hole dimensions, mm mm rmax=0.8mm Insert the operator into the cutout hole from the back of the panel, and as shown in Fig.4, insert the pushbutton into the operator cylinder while aligning the grooves inside the pushbutton with the protrusions on the operator. Fig. 4 etting pushbutton to operator cylinder Pushbutton inside groove etting Cylinder inside protrusion mm 0 ø mm 0 Note : If key-washer or legend plate are not used, 4.8mm-wide. location holes shown in Fig. need not be cutout. Mounting operator to panel. Pushbutton with a round bezel (ordinary mounting) Insert the operator into the cutout hole from the back of the panel, and tighten the nut with the AX00 wrench from the front of the panel to secure the operator as shown in Fig.2. Fig. 2 Pushbutton with a round bezel Panel Operator AF95-3. ARWR, WCR () As shown in the following figure, insert the tip of a flathead screwdriver into the selector tip groove. Rotate the screwdriver in the direction indicated by the arrow until the selector tip rises, and draw out the knob. (2) Attach the operator in the same manner as described in step. (3) Insert the knob, with the selector tip in the floated state, into the original position of the rotation tube, and push the selector tip into place. Fig. 5 mall flathead screwdriver (I-shaped, 4mm wide) elector tip groove Wrench (AX00) AF Note : Recommended tightening torque is from.5 to 2N m. 2. ARV0R, V0, V2R, V2, V5R, V5 () The button is removed after loosening the center button by inserting the end of the AR9A002 tightening wrench or the AR9A005 wrench (enclosed with pushbutton) into the holes in the center button and turning counterclockwise, as shown in Fig.3. (2) Attach the operator in the same manner as described in step. Fig. 3 Wrench (AR9A005) Wrench (AR9A002) oosen C Wrench (AR9A0) Tighten Button oles in center button The center button can be attached or removed using the C portion of the AR9A0 tightening wrench as well. 4. ARM0R, M4R, M5R, B0R, Q7 () oosen the button by hand. (2) Attach the operator in the same manner as described in step. (3) crew in the button by hand, making sure that the button is screwed in all the way. (Recommended tightening torque: 0.3 to 0.5 N m) Fig. 6 Button 5. ARM3R, M8R, BR, B2R and B3R The outer circumference of the nut is threaded, so be careful not to cut your hand on it. () oosen and remove the guard ring by hand. (2) oosen and remove the button and nut by hand. (3) Insert the operator into the cutout hole from the back of the panel, and tighten the nut to secure it in place. (Recommended tightening torque: 0.3 to 0.5 N m) (4) crew in the button by hand, making sure that it is screwed in all the way. (Recommended tightening torque: 0.3 to 0.5 N m) (5) oosen and remove the guard ring by hand. (Recommended tightening torque:.5 to 2.5 N m) Fig. 7 Guard ring Button Fuji Electric FA Components & ystems Co., td./d & C Catalog /09

53 Pushbuttons/electors/Pilot ights AR and DR Notes on use 6. ARN0R, VR, Q2R () oosen and remove the screw on the side of the button, taking care not to loosen the screw. (2) Attach the operator in the same manner as described in step. (3) Attach and secure the button in place with the screw, making sure that the head of the screw does not protrude from the side. (4) Recommended tightening torque: N0R, VR 0.5 to.0n m Q2R 0.3 to 0.5N m Fig ARGR () Insert the tips of the AR9A00 wrench into the indentations around the button center, and turn the wrench to loosen and remove the button. (2) oosen and remove the guard ring by hand. (3) Insert the switch operator into the cutout hole from the back of the panel, and secure it with the guard ring from the front of the panel. (Recommended tightening torque:.5 to 2.5 N m) (4) Attach and secure the button with the AR9A00 wrench. (Recommended tightening torque: 0.3 to 0.5 N m) Fig. 9 Philips head screwdriver (No. 2, 6-mm dia.) crew (M3.5) crew hole Button 9. Mounting a 22mm-dia. command switch with a square button and a square bezel, or with a round button and a square bezel, to a panel cutout hole for a mm-dia. command switch using an adapter As shown in Fig., mount an adapter and packing onto a 22mm-dia. command switch (AR22, DR22 series) with a square button and a square bezel or one with a round button and a square bezel. Then, insert the switch operator into the panel cutout hole from the front of the panel. Use AR9A0 wrench section A to tighten the locking nut from behind the panel to secure the switch. Use the adapter accessory nut for this purpose. Do not use the command switch accessory nut. Fig. Command switch with a square button and a square bezel, and command switch with a round button and a square bezel Panel 22mm-dia. command switch (with a square or round pushbutton and a square bezel) Adapter quare adapter AF (AR9Y003) Note : Recommended tightening torque is from to.5n m. : 2.5 to 5mm Wrench (AR9A0, section A) Wrench (AR9A00) Button Guard ring Panel This adapter can be used with the following 22mm-dia. Command switches : AR22F0M, F5M, E0M, E5M, F0P, F5P, E0P, E5P, M4P AR22F0, F5, E0, E5, F0Y, F5Y, E0Y, E5Y, M4Y AR22PY, PCY, WY, WCY, RY, RCY, JY, JCY, PP DR22F3M, F4M, F5M, E3M, E3P Indentations around button center 8. DRF4M, F4N, M4M Insert the pilot lights from the front of the panel and fix it with the AX536 tightening wrench from the back of the panel. () Recommended tightening torque: to.5n m (2) For pilot lights with transformers and resistance units, remove the transformer or resistance unit in advance. (Fig.0) 0. ARR, 2R, 3R, 6R () Attach the operator in the same manner as described in step. (2) Attach the rosette assembly to the operator. (3) Pressing the rosette from the directions indicated by the arrows, insert the selector tip in the groove. (4) Make sure that the selector tip is inserted completely. (5) To remove the rosette, use a small flathead screwdriver to remove the selector tip as described in step 3, and then remove the rosette. Fig. 2 Fig. 0 Push 45 Pull Rosette elector tip Push /0 Fuji Electric FA Components & ystems Co., td./d & C Catalog

54 Pushbuttons/electors/Pilot ights AR and DR Notes on use. ARA (joy stick selector) () Remove the clamp ring as shown in the following figure. (2) Attach the operator in the same manner as described in step. Note: Even if a lock type is used, remove the clamp ring in the same manner. Fig. 3 Applicable panel thickness The AR/DR series switches are mountable to panels with the thickness given in the table below. witch mounting condition Without accessories Applicable panel thickness mm With accessories AR9Y003 adapter 2.5 to 5mm Panel 2. Numerical indicators ee page /54 Use the AX536 tightening wrench. Using accessory ring-packings Use the required number of ring-packings (.6mm-thick, 4 pieces, resin mold). Table below is a guideline for using the packings. If a locking nut or legend plate is used, the thickness must be counted as an additional panel thickness. vs. number of packings (reference data) Effective panel thickness including lock-ring and legend plate thicknesses Number of packings Water-proof and dust-proof cap Applicable type: Water-proof cap AX052 Dust-proof cap AX032, 033, 034 AX3 AX57 When attached to the panel in combination with a water-proof or dust-proof cap, the water-proof cap or dust-proof cap may sink downward and prevent the depressed button from returning to its original position. As shown in the following figure, cut an approximately 5-mm air outlet in the portion of the ring packing touching the panel surface. Also, reduce the number of packing rings by one below the standard number. The clamp ring tightening torque is.5 to 2.5 N m. Fig. 4 Cap.0mm to less than 2.0mm 2.0mm to less than 3.6mm 3.6mm to less than 5.0mm 5.0mm to less than 6.0mm Minimum mounting space, mm The minimum mounting spaces required for AR/DR command switches are given below. (Fig. 5) Fig. 5 Illuminated pushbutton and pushbutton Emergency stop illuminated pushbutton and emergency stop pushbutton Illuminated and non-illuminated selectors Pilot light 5mm 42 * * 2 42 * 4 * * * 3 Degree of protection The water-proof cap or dust-proof cap seals the panel surface to provide IP65 protection. Notes: * ARM3R, M8R, GR: 55mm * 2 ARB R, GPR, VR: 80mm * 3 * 4 F4M F4N (Vertical lengthwise mounting) (orizontal lengthwise mounting) M4M Pilot lights short-body with transformer Pilot lights with resistor Fuji Electric FA Components & ystems Co., td./d & C Catalog Other items are the same as for the AR22 and DR22 series, see page /53 to /57. /

55 Pushbuttons/electors/Pilot ights AR22/DR22 and AR/DR Accessories Accessories Description Description Wrench AR9A0 Dimensions, mm: x 00 x 6.5 B Wrench (for center button) AX8003 Dimensions, mm: ø4 x 50 Attaching and removing the center button of the AR22VGF type. A C Remarks ection A Use this section to tighten the nut for mounting the operator on a panel. ection B Use this section to tighten or remove the lens. Applicable type: AR22F0, F5, E0, E5, F0P, F5P, E0P, E5P AR22G, G2, G4, G6, G7, G9 DR22E3, E3P ARE0, E5, G2, G3, G4, G7, G8, G9 DRE3 Wrench for AR22, and DR22, For ø For ø22 Wrench for AR, DR AF93-6 AF96-24 AR9A006 Dimensions, mm: ø40 x 00 To mount an AR22, or DR22, command switch to a panel, use this wrench to tighten the nut securely. It is very easy to fit this wrench onto the nut. The wrench with an inside rubber-lining can be easily used with either your right or left hand. AX00 Dimensions, mm: ø47 x 00 Wrench for AR22, DR22 KK02-26 ection C Fit the tabs on the section C in the center button, and turn the wrench to tighten or remove the button. Applicable type: AR22V (except V4R, VG type) ARV (except VR type) AR9A70 Dimensions, mm: ø28 x 70 pecial tool AF To mount an AR or DR command switch to a panel, use this wrench to tighten the nut securely. AX32 Dimensions, mm: 42 x x 6.5 For all types except pilot lights Application: AR22, DR22 nut tightening AX32 DR9A32-T Dimensions, mm: 57 x x For pilot lights Wrench AX536 Dimensions, mm: ø32 x 76 Application: DRF4M, F4N, M4M, N, N2 nut tightening G-873 This tool is used to remove contact blocks and transformer units. The AX32 can remove round color lens of switches. DR9A32-T AF95-2 Wrench Wrench (for center button) Wrench /2 KK02-097A KK02-098A AF03-5 AR9A00 Dimensions, mm: ø22 x 35 Application: AR22, DR22 round-type lens tightening AR22E0M, E5M oil-proof cap tightening AR, DR round-type lens tightening ARGR button tightening AR9A002 Dimensions, mm: ø8 x 60 Application: AR22V center button tightening (except V4R, VG type) ARV center button tightening (except VR type) AX70 Dimensions, mm: ø25 x 72.5 Application: DR22N, AR22VG nut tightening Wrench/amp changer amp changer For E2/5 lamp I-0 For BA9/3 lamp AF95-22 AX702 Dimensions, mm: ø36 x 55 Use this wrench to tighten or remove the lens and lamp. Used with: ens of DR22D0, K0 and DRD0, K0 Incandescent lamp of pilot lights and illuminated pushbuttons AX790 Dimensions, mm: ø4 x 55 Use this rubber wrench for mounting or removing lamps from pilot lights and illuminated pushbutton switches. This wrench can be used for both ED and incandescent lamps. One end is for the BA9/3 lamp, and the other is for the E2/5 lamp (for use with mm dia. pilot lights with resistor). For mm dia. pilot lights with resistor, this tool can also be used to attach or remove incandescent lamps. Fuji Electric FA Components & ystems Co., td./d & C Catalog

56 25 Pushbuttons/electors/Pilot ights AR22/DR22 and AR/DR Accessories Description Description Protection cover AR9E760 Key washer for AR22, DR22 This cover protects against accidental operation. The cover lid is returned home with a spring force. ( is provided) AR9Y75 Use this metal washer when securing a operator in a 22.3mm dia. panel cutout hole. Dimensions, mm: 2.9 AF95-29 Cover for preventing operating errors with mm dia. types Used with: AR22F0, F5, E0, E5, F0M, F5M, E0M, E5M, F0P, F5P, E0P, E5P AR22F0R, F5R, E0R, E5R, F0, F5, E0, E5, E0Y, E5Y, F0Y, F5Y, FAR, FBR, EAR, EBR Dimensions, mm: AR9E538 Inadvertent operation can be prevented by fitting a transparent cover with chain in the clamp ring. Used with: ARF0R, F5R, E0R, E5R, E0, E5 32 Key washer for ø AF AX082 Use this metal washer when securing an operator in a.5mm dia. panel cutout hole. Dimension, mm: ø22. sq. 2.6 When the periphery of the panel cutout has a hole to stop rotation, use with side A contacting the panel (except for Joy stick selector types). Even when the periphery of the panel cutout does not have a hole to stop rotation, if used with side B contacting the panel it can serve as a washer for eliminating play (except for Joy stick selector types). A B Dimensions, mm: ø.7 ø Cover Ring: ø0 ength: Approx. 45mm ø.2.2 ø C-06 ø ø.2 Clamp ring mounting portion Operator base cover AR9Y002 Attach this cover to the operator base of a pushbutton switch with only one contact block (NO or NC) to protect against dust. AF9-67 Thickness: mm Cover for preventing operating errors with mm dia. types AX408 This is a metallic cover for preventing inadvertent operation. Used with: ARF0R, F5R Dimensions, mm: ø A6.2 topper When attaching the cover to a vertical panel, if you attach it so that the portion indicated by an "A" is at the upper right, the stopper causes the cover to stop above the push button to halt further rotation. Adapter for AR22, DR22 AF95-26 AR9Y78 Use this resin adapter to mount the AR22/ DR22 (switch/pilot light) in a 25.5mm dia. cutout hole on a panel. Dimensions, mm: ø29.5 ø24.9 ø22.3.af95-28.af The material is steel (zinc plated). Fuji Electric FA Components & ystems Co., td./d & C Catalog /3

57 Pushbuttons/electors/Pilot ights AR22/DR22 and AR/DR Accessories Description Description Adapter for AR22 and DR22 AR9Y008 Use this resin adapter to mount the AR22/ DR22 (switch/pilot light) in a 25.5mm dia. cutout hole on a panel. Mounting, mm: Adapter Panel Operator.0 to 5.5 Round-frame adapter for mm dia. types AR9Y0 By using this adapter in combination with the round type 22mm dia. command switch, the 22mm dia. command switch can be used as a mm dia. command switch/ round frame type. Used with: AR22, DR22 round types (except for M3R, M8R,VG selectors, buzzers) Dimensions, mm Adapter, Joy stick Panel cutout, mm: ø4.5 ±0.2 ø Adapter for AR and DR AF98-98 Equipped with device for stopping rotation Used with: AR22, DR22 round head types (except for M3R, M8R, VG, joy stick selectors and buzzers) Dimensions, mm: ø33 ø25 ø22.3 AR9Y003 Mount this adapter onto a 22mm dia. command switch with a square button and a square bezel to obtain a mm dia. command switch with a square/round button and a square bezel. A resin ring-packing and a nut are accessories of the adapter. KK02-00A Round-frame adapter for mm dia. type VG AX958 Using this adapter in combination with model AR22VG (22mm dia.) allows mounting to a.5mm panel cutout hole. The attachment method is as follows. The washer and nut (22.3mm dia.) originally attached to the operator will not be used, so remove them. Attach the 22mm dia. packing (included), the mm dia. adapter and the mm dia. packing to the operator in that order, and insert the operator into the cutout hole. From the back of the panel cutout hole, fasten the mm-dia. nut using the AX70 wrench. The correct tightening torque is to.5 N m. Dimensions, mm: AF95-46 Dimensions, mm: Adapter for for mm dia. mm dia. ø4 ø20.5 for mm dia. ø4 ø ø29.7 M22 ø34 ø.5 ø 20.5 ø ø22.3 Adapter for mm dia. * for 22mm dia. Operator for mm dia. * Panel for mm dia. * Note: : 2.5 to 5mm Adapter 40 sq. sq. ø22.3 AR22 type number * Adapter for mm dia. (AX958) ø29.7 M22 ø39 ø Panel cutout, mm: ø Note: : 2.5 to 5mm AF93-4 ø Note: : mm /4 Fuji Electric FA Components & ystems Co., td./d & C Catalog

58 Pushbuttons/electors/Pilot ights AR22/DR22 and AR/DR Accessories Description egend plate for AR22 AR9P7-➀➁➂ This aluminum ➀ Color legend plate is for a B: Black 22.3mm dia. panel A: Aluminum cutout hole. ( provided) egend Code ➁ ➂ I-033 Blank 0 0 ON 0 A OFF 0 B TART 0 C TOP 0 D OFF-ON 2 A Dimensions, mm: 5 R5 ø22.5 Thickness: 0.8mm egend plate for AR22 AR9P72-➀➁➂ This aluminum ➀ Color legend plate is for a B: Black 22.3mm dia. panel A: Partially black cutout hole. ( provided) egend Code ➁ ➂ Blank 0 0 ON 0 A OFF 0 B TART 0 C TOP 0 D OFF-ON 2 A Dimensions, mm: 5 AR9P7-B AR9P72-B Black Black AR9P7-A Aluminum AR9P72-A Aluminum Description egend plate for AR22 AR9P73-➀➁➂ This aluminum ➀ Color legend plate is for a B: Black 22.3mm dia. panel A: Partially black cutout hole. ( provided) egend Code ➁ ➂ AF95-4 Blank 0 0 ON 0 A OFF 0 B TART 0 C TOP 0 D OFF-ON 2 A Dimensions, mm: 5 AR9P73-B ø Black Dimensions, mm: AR9P79 Aluminum Thickness: 0.8mm egend plate for AR22 AR9P79-➀➁ This aluminum legend emergency stop plate is for a 22.3mm dia. Plate color: Yellow panel cutout hole. etter color: Black ( provided) egend Code etter ➀ ➁ hight Blank 0 0 EMERGENCY 5 A 7mm TOP 5 B 3mm EMERGENCY 5 C 3mm OFF EMERGENCY AR9P73-A I-032 ø22.5 Thickness: 0.8mm T O P ø22.5 ø70 Thickness: 0.8mm KK02-265A Note: Engraving for making letters is not available. Fuji Electric FA Components & ystems Co., td./d & C Catalog /5

59 Pushbuttons/electors/Pilot ights AR22/DR22 and AR/DR Accessories Description Description egend plate for AR22 (width: 34mm) AR9P05-B➀➁ : ight 36mm AR9P-B➀➁ : ight 40.3mm egend plate for AR AX77-➀➁➂➃ ➀ Material and color This legend plate is for a.5mm dia. panel cutout hole. Color: black egend code Code Material Color ➀ ➁ Brass ilver B Aluminum Black A Aluminum Blank 0 0 ON 0 A OFF 0 B TART 0 C TOP 0 D OFF-ON 2 A Optimal for use in combination with a 3-position selector switch. egend plates are available in two types: short, 36 mm; and long, 40.3mm. Dimensions, mm: AR9P05 34 AR9P 34 Y-545 ➁ ize : tandard : hort size egend Code ➂ ➃ Blank 0 0 ON 0 A OFF 0 B TART 0 C TOP 0 D OFF-ON 2 A.AF ø Thickness: 0.6mm ø22.5 AF Dimensions, mm: AX77 40 egend plate with egend plate AR9P009-B name plate for AR22 Name plate AR9P00-B ➀➁ (34 8mm) egend plate Name plate AR9P0-B AR9P02-B ➀➁ (34 3mm) AF87-49 ø.2 50 Thickness: 0.6mm egend plate Name plate Name Code plate ➀ ➁ AR9P007-B AR9P008-B ➀➁ (27 6mm) AX77B AX77A 40 AX77-B AX77-A ON 0 A OFF 0 B TART 0 C TOP 0 D OFF-ON 2 A ø.2 50 Thickness: 0.6mm 42 Dimensions, mm: AR9P ø (Name plate) AR9P AR9P0 34 ø22.3 (Name plate) AR9P egend plate for AR AX720-➀➁ This aluminum legend emergency stop plate is for a.5mm dia. Plate color: Yellow panel cutout hole. etter color: Black egend Code etter ➀ ➁ hight Blank 0 0 EMERGENCY 5 A 7mm TOP AR9P (Name plate) AR9P008 3 Dimensions, mm: EMERGENCY ø.2 ø T OP 28 ø70 Thickness: 0.8mm.AF K-598 Note: Engraving for making letters is not available. /6 Fuji Electric FA Components & ystems Co., td./d & C Catalog

60 Pushbuttons/electors/Pilot ights AR22/DR22 and AR/DR Accessories Description Description Panel plug for AR22 Round: Group panel for and DR22 AX725-B Black 22mm dia. type AX725- Gray I-027 quare: AX726-B AX726- Black Gray Dimensions, mm: ø29.5 x 7 (AX725) 29.5 sq. x 7 (AX726) Use this plug to cover up unused panel cutout holes. For oil proof usage, use together with packing (AR9Y7) and a nut (AR9R7). DR9Y0 These new 22mm dia. command switch/ square types can be neatly aligned side by side on this group panel at a mm pitch to form a uniform panel face with no misalignment between mounted switches. Depending on the number of switches to be grouped (maximum 2), the panel can be divided (by cutting at the portion indicated by an asterisk (*)). Mounting, mm: (example showing a group of three) Panel plug for AR and DR AX0 Color: ilver (metal) This plug is used to cover up unused panel cutout hole. Dimensions, mm: Panel Group panel Operator to 5.5 Panel plug M ø Dimensions, mm: * 2-ø T x =3 360 AF Thickness: 0.8mm Jumper APCX029 (For pilot light without transformer) DR9Y00 (For pilot light with transformer) Use this jumper to connect terminals allocated in a mm pich. Rated current is 3A Dimensions, mm AF95-53 APCX DR9Y00 9 Thickness: 0.5mm 7.5 AF95-27 Fuji Electric FA Components & ystems Co., td./d & C Catalog /7

61 Pushbuttons/electors/Pilot ights AR22/DR22 and AR/DR Accessories Description Description ens for illuminated Used with Center button pushbutton switch and AR9C0- * AR22F0, F5, F0P, F5P (For V type) pilot lights AR9C020-R AR9C02- * AR22E0, E5, E0P, E5P AR22G, G2, G4, G6, G7, G9 AR9C020- DR22E3, E3P AR9C08-R ARE0, E5, G2, G3, G4, G7, G8, G9 DRE3 AR9C08- AR9C03- * AR22F0M, F5M AR9C- * AR22E0M, E5M DR22E3M, F5M AR9C05- AR22M4, M4P Replace the AR9C06- AR22M0, M5 DR9C00- DR22D0 DRD0* 2 DR9C002- DR22K0 DRK0* 2 AF95-32 DR9C20-C DRM4M Push-lock, turn-reset DR9C2-C DRF4N button DR9C22-C DRF4M (V and Q types) AF Button for pushbutton switch AF94-46 KK02-0A DR9C26- * DR9C26-C DR9C27- * Notes: * When the main unit code is W (white), use a lens of clear color. * 2 Except for pilot lights with resistor AR9C00- AR9C003- AR9C0- AR9C005- AR9C006- AR9C007- AR9C024- AR9C027-C AR9C028-C AR9C-R AX539- DR22F3M DR22F4M DR22E3N Replace the mark by the lens color code Color Green Red Clear Yellow Code G R C Y Color Orange Blue White Code A W Used with AR22F0R, F5R, F0Y, F5Y, G2R, G7R ARF0R, F5R, FVR AR22R, 2R, 3R, 6R ARR, 2R, 3R, 6R AR22E0R, E5R, G0R, G3R, G5R, G8R AR22E0Y, E5Y ARE0R, E5R, G0R, GR, G5R, G6R AR22F0, F5 AR22E0, E5 AR22M4R, M9R, M4Y ARM4R AR22M0R, M5R ARM0R, M3R, M5R, M8R ARB0R, BR, B2R, B3R AR22FAR, FBR, ARFAR, FBR AR22EAR, EBR, AREAR, EBR ARN0R Cap for ARFVR Knob ever AF95-3 KK02-A AF95-43 AF95-42 AR9C008-R AR9C00-R AR9C07-R AR9C09-R AR9C02-R AR9C02- AR9C026-R AR9C029-R AR9C0-R Used with AR22V0R, V2R, VR ARV0R, V2R AR22V5R, ARV5R AR22V0, V2, VD, VA, V ARV0, V2 AR22V5*, ARV5* mark by the button color code Color Red Black Yellow Code R B Y Note: * V5: Red and yellow only Used with AR22V4R AR22Q2R, ARQ2R AR22V2R, V2, ARV2R, V2 AR22VA AR22V0R, V0, ARV0R, V0 AR22V5R, V5*, ARV5R, V5* AR22VD ARVR AR22VR, V Replace the mark by the button color code Color Red Black Yellow Code R B Y Note: * V5: Red and yellow only AR9M006- Used with AR22PR, PCR, PY, PCY ARPR, PCR Replace the mark by the knob color code Color Black Green Red Code B G R AR9M007- Used with AR22WR, WCR, WY, WCY ARWR, WCR Replace the mark by the lever color code Color Black Green Red Code B G R KK02-02A KK02-03A Replace the mark by the button color code Color Green Red Black White Code G R B W Color Yellow Orange Blue Code Y A Cylindrical knob AF95- AR9M008- Used with AR22RR, RCR, RY, RCY Replace the mark by the knob color code Color Black Green Red Code B G R /8 Fuji Electric FA Components & ystems Co., td./d & C Catalog

62 Pushbuttons/electors/Pilot ights AR22/DR22 and AR/DR Accessories Description Description Knob (for illuminated selector switch) Key AF AF egend plate (for F type with round bezel) AF egend plate (for E type with round bezel) AR9M005- Replace the Used with AR22P, PP ARP mark by the knob color code Color Green Red White Code G R W Color Yellow Orange Blue Code Y A AR9C022- AR9C025- Used with AR22JR, JCR, ARJR, JCR, AR22JAR, ARJAR Replace the mark by the key type code. Code: A, B, C, D, E or F, 6 types. AR9P00-W This part is made of acrylic resin. Use paint or thinner compatible with resin. Dimensions, mm: ø7.8 x 0.9 AR9P002-W This part is made of acrylic resin. Use paint or thinner compatible with resin. Dimensions, mm: ø9.7 x 4.2 egend plate and color plate (for F type with square bezel) AF KK02-05A KK02-06A KK02-07A egend plate DR9P24-W DR9P242-WP DR9P242-W DR9P243-WP DR9P243-W DR9P2-WP DR9P2-W color plate DR9P24- DR9P242- DR9P243- DR9P2- Used with AR22F0M, F5M DR22F3M, F4M DRM4M DRM4M, ED(W) DRF4N DRF4N, ED(W) DRF4M DRF4M, ED(W) s DR9P242, 243 and 2-W are ED illuminated, and used exclusively with operators having a W in the type number. Used with DR22F3M, F4M DRM4M DRF4N DRF4M Replace the mark by the color code Color Green Red White Code G R W Color Yellow Orange Blue Code Y A This part is made of acrylic resin. Use paint or thinner compatible with resin. Dimensions, mm: DR9P24: 20.8 sq. x 0.8 DR9P242: 33.4 sq. x DR9P243: 33.4 x 27.4 x DR9P2: 27.4 sq. x ymbol mark plate AF AF98-97 AR9P09- AR9P020- Used with AR22FAR, FBR, ARFAR, FBR AR22EAR, EBR, AREAR, EBR : ymbol I T I T Plate W B W B W B Clear ymbol Red Green Green Black Code B B 2B W: White, B: black egend plate (for E type with square bezel) AF AF AR9P003-W DR9P00-W Used with AR22E0M, E5M DR22F5M, E3M DR22E3N This part is made of acrylic resin. Use paint or thinner compatible with resin. Dimensions, mm: AR9P003-W: 20 sq. x 4.8 DR9P00-W: 9.7 x 26.7 x 4.5 egend sheet AX727 Affix this seal to the DR9P24- /AR9P003 legend plate for marking or labeling. Dimensions, mm: 20 sq. x AF95-34 Fuji Electric FA Components & ystems Co., td./d & C Catalog /9

63 Pushbuttons/electors/Pilot ights AR22/DR22 and AR/DR Accessories Description Description ED lamp amp voltage Neon lamp (for AR22VGF type) KK02-09A ED lamp (for DR with resistor) KK02-0A APX50-6 APX50-D6 APX50-2 APX50-5 APX50-24 Dimensions, mm: ø0 APX APX509-24O amp voltage 24V AC/DC amp base: BA9s/3 Note: The symbol in the box indicates the color of light emitted. (ee note APX50.) When the code is W (white), use an ED lamp ((APX O) Dimensions, mm: APX V AC 6V DC 2V AC/DC 5V AC/DC 24V AC/DC Replace the mark by the luminous color code uminous Yellow Red Green color Code Y R G ens color Y R G uminous Amber Orange Blue color Code A O ens color A W, A* * Orange is available only for the DR22F4M pilot light. ø4 34 ED unit for DR (square type) KK KK02-2A AR9N00-A AR9N00-KA AR9N00-MA AR9N00-PA amp voltage 0V AC 20V AC 220V AC 240V AC uminous color: Orange Dimensions, mm: 9 ø0 amp base: BA9s/3 Do not use the ED lamp for other types. amp Used with voltage DR9Q00-6 6V DC DRM4M DR9Q00-2 DR9Q00-B DR9Q00-E 2V AC 2V AC/DC 24V AC/DC DR9Q V DC DRF4N DR9Q002-2 DR9Q002-B DR9Q002-E 2V AC 2V AC/DC 24V AC/DC DR9Q V DC DRF4M DR9Q003-2 DR9Q003-B DR9Q003-E 2V AC 2V AC/DC 24V AC/DC Replace the mark by the luminous color code uminous Yellow Red Orange Amber color Code Y R O A ens color G, Y R W A Dimensions, mm: DR9Q sq. APX509 ø2 27.KK02-3A Base lamp: BA9s/3 + (DC type) (DC type) KK02-A ED lamp (for AR22VGF type) amp base: E2/5 amp voltage AR9002-ER 24V AC/DC uminous color: Red DR9Q Dimensions, mm: 9 eat (gold plated) DR9Q sq. ø0 amp base: BA9s/3 KK02-09A Do not use the ED lamp for other types. /20 Fuji Electric FA Components & ystems Co., td./d & C Catalog

64 Pushbuttons/electors/Pilot ights AR22/DR22 and AR/DR Accessories Description Description Incandescent lamp amp Rated voltage, Contact protection cover Used with * voltage consumption AR9D00- AR22, -step contact AX35 5.5V AC/DC 6.3V AC/DC, AR9D00-2 AR22, 2-step contact W AR9D002- AR, -step contact AX279 5V AC/DC 8V AC/DC, AR9D002-2 AR, 2-step contact W Incandescent lamp (for DR with resistor) AF AX 20V AC/DC 24V AC/DC, W AX29 24V AC/DC V AC/DC, W Dimensions, mm: ø0 20 amp base: BA9s/3 amp Rated voltage, voltage consumption AX 5V AC/DC 8V AC/DC, 2W KK02-7A The contact is covered with a silicon rubber cover to keep out foreign matter such as dust, etc. ection A of the AR9D00 is separate. * ee page /24, AR22 Z8, AR Z8 Dimensions, mm: AR9D AR9D Part A 35.6 Dimensions, mm: ø4 34 amp base: E2/5 AR9D KK02-5A KK02-8A 32.5 Contact block (NO) AR9B290 tandard AR9B290- Overlap Color: Blue Dimensions, mm: 9.3 x 29 x 27 AR9D AF Note: is not supplied with this. Contact block (NC) AR9B29 tandard AR9B29- Overlap amp terminal AF AF Color: Red Dimensions, mm: 9.3 x 29 x 27 Note: is not supplied with this. AR9B292 Color: Black Dimensions, mm: 9.3 x 29 x 27 Note: is not supplied with this. Transformer unit AF AR9T5- AR9T5- AR9T5-M AR9T5-Q AR9T5- AR9T5-T AR9T5-V AR9T5-W AR9T557- AR9T557- AR9T557-M AR9T557-Q AR9T557- AR9T557-T AR9T557-V AR9T557-W Primary voltage 00-0V AC 5-27V AC V AC 2-254V AC V AC 400-0V AC 480V AC V AC 00-0V AC 5-27V AC V AC 2-254V AC V AC 400-0V AC 480V AC V AC Used with tandard type (except buzzers) DRF4N, F4M, M4M Dimensions, mm: Up to 220 V 22.4 x x 45 Over 220 V 25.3 x 29 x 48 Note: With terminal cover AF95-33 Fuji Electric FA Components & ystems Co., td./d & C Catalog /2

65 Pushbuttons/electors/Pilot ights AR22/DR22 and AR/DR Accessories Description Description Base unit for AR9T003 transformer separate mounting Use this base in combination with a transformer unit. This base unit can be mounted using screws or rails. Dimensions, mm (Y2) ø4.5 for mm dia. types (Resin types are black, metallic types are silver.) KK2-20A AR9R00: AX088: Resin types are black (standard) Metallic types are silver Used with: ARF0R, F5R, FAR, FBR, E0R, E5R, EAR, EBR, E0, E5, Q7 DRD0, E3, K0 AR9R002: AX093 : Resin types are black (standard) Metallic types are silver (Y) X2 X Transformer unit (optional) * KK2-2A Used with: ARM0R, M5R, M4R, G0R, G5R, N0R, R, V R, Q2R, V, PR, PCR, WR, WCR, JR, JCR, JAR, P, A N, A 35.5 KK2-22A 5 35 Rail: T T35-7.5A T35-5A KK02-8A * Except for the types 0V AC, 27V AC and 220V AC. KK2-23A Resistor Voltage stabilizer Device for ED lamp flickering AF95-33 Resistor: AR9T59- (0V DC) Fit this resistor when using ED of 24V DC rating with 0V DC power. Voltage stabilizer: AR9T00-E This unit allows an ED lamp of 24V DC rating to be used in a circuit with voltage from 27V to 35V (AC or DC). Flickering device: 6V AC: AR9T002-A 6V DC: AR9T to 24V AC: AR9T002-G * 2 to 24V DC: AR9T002-E * * Used in combination with 2V, 5V, or 24V rated ED lamp. Note: With terminal cover Used with Dimensions, mm Water-tight cap for 22mm dia. types AR9D797- This rubber cap protects the operator and switch mechanism against dust and water. Use this cap in a dusty or moist environment. Used with: AR22E0,E5 AR22E0R, E5R Replace the code. Code G R B Y Blank mark by the luminous color Color Green Red Black Yellow Clear (standard) AR9R7 DR9R00 AR22, DR22* DRF4M DRF4N DRM4M ø29.7 x 4 ø33.8 x 5 Dimensions, mm: (20) 7.5 * Except AR22VG, Joy stick selectors, buzzers and numerical indicators ø32 AF KK2-24A KK2-9A Water-tight cap for mm dia. types AX052 This rubber cap protects the operator and switch mechanism against dust and water. Use this cap in a dusty or moist environment. The only color available is transparent. Used with: ARE R, E Dimensions, mm: ø36 x 22.5 Y-559 /22 Fuji Electric FA Components & ystems Co., td./d & C Catalog

66 Pushbuttons/electors/Pilot ights AR22/DR22 and AR/DR Accessories Description Description Dust-proof cap for Color Used with pec. mm dia. types AX032 Red ARE0R Oil-proof AX033 Green AX034 Black AX Red ARF0R Oil-proof AX2 Green AX3 Black AX57-R Red ARB2R, Oil-proof AX57-G Green B3R AX57-B Black AF AX3-R Red ARE0R Weather AX3-G Green resistance AX3-B Black AX-R Red ARF0R Weather AX-G Green resistance C-993 AX-B Black Dimensions, mm: AX032 to 034, to 3 AX, M P.5 ø40 KK2-26A AR9Y5 DR9Y320 DR9Y32 * Applicable up to 220V. * 2 DR22D0, E3, K0, F M, E3M, E3N, E3P, DRD0, E3, K0 The terminal cover is provided as standard with the applicable types listed above. (Except for joy stick selector switches, numerical indicators, pilot lights with resistors, contact block alone and lamp terminal alone) AX5 Used with Contact unit amp terminal Transformer unit * Pilot lights * 2 (without transformer) DRF4M, F4N, M4M (without transformer) Used with Buzzers (without transformer) Dimensions, mm 8.4 x 29 x 8.4 ø22 x sq. x 8.7 Dimensions, mm 23.5 x 27.5 x 6 AF AX M70 P.5 ø80 AX5 G-842 AX426 AX6 DRD (without transformer) DRD (with transformer) Buzzers (B0 type) 27.5 x 3 x 8 3 x 29 x 6.5 Used for sealing the operator from foreign debris such as dust, oil (oil-proof), and water (weather resistance) in environments where the unit is in contact with such elements. AX426 AF * 2V and over With transformer * With short-body transformer With resistor unit AR9Y7: AR22 and DR22 (Rubber) The terminal cover is provided as standard with the applicable types listed above. Note: Except for joystick selector switches, buzzers AF AX282: AR and DR (Resin-standerd) Note: Except for DRF4M, F4N, M4M, numerical indicators AX6 G-5 AX49: AR and DR (Rubber) KK2-25A Note: Except for DRF4M, F4N, M4M, numerical indicators Fuji Electric FA Components & ystems Co., td./d & C Catalog /23

67 Pushbuttons/electors/Pilot ights/buzzers AR22/DR22 and AR/DR pecial products Products equipped with contact protection cover Features A silicon rubber cover is provided for the contact block to keep out foreign matter such as dust, etc. Other ratings and specifications are the same as those of the standard type. AR22 Z8 AR Z8 pecify Z8 at the end of the type number of the standard type. Dimensions The only thing different from the standard product is the addition of a -mm thick silicon rubber cover around the contact block. Applicable types Pushbuttons * Emergency stop pushbuttons * 2 electors Illuminated pushbuttons * 3 (without transformer) Emergency stop illuminated pushbuttons* 2 (without transformer) Illuminated selectors (without transformer) Contact arrangement NO+NC, 2NO* 4, 2NC NO+3NC, 2NO+2NC, 3NO+NC, 4NO* 4, 4NC NO* 5, NC NO+2NC, 2NO+NC, 3NO* 5, 3NC Notes: * Except for ARB0R, BR, B2R, B3R, N0R, and GPR. * 2 Except for unibody (VG types) * 3 Except for ARQ7 * 4 Except for emergency stop pushbutton switch * 5 Except for emergency stop illuminated pushbutton switch Remarks For use with a -step contact For use with a 2-step contact For use with a -step contact For use with a 2-step contact Resisting water-soluble cutting oils and heat Features afer operation in environments exposed to water-miscible cutting fluids, machining oils, lubricating oils, cleaning oils and high humidity (up to 95%) is made possible by using materials that protect against rust and corrosion of components. Other ratings and specifications are the same as those of the standard type. AR22 Z9, DR22 Z9 AR Z9, DR Z9 pecify Z9 at the end of the type number of the standard type. Dimensions ame as those of the standard type Applicable types AR22, DR22 series AR 22 (Except for joy stick selectors and VG types) DR22 (Except for pilot lights with resistor unit, buzzers, and numerical indicators) AR, DR series AR (Except for Q7 types and joy stick selectors) DR (Except for D, F4M, F4N, M4M types, pilot lights with resistor/resistor unit, buzzers, and numerical indicators) /24 Fuji Electric FA Components & ystems Co., td./d & C Catalog

68 Pushbuttons/electors/Pilot ights/buzzers AR22/DR22 and AR/DR pecial products Meeting IP2X finger protection standards Features Conforms to EN standard EN602- (protecting against electric shock). The terminal has IEC60529 degree of protection; IP2X finger protection secured (a mock human finger used in testing did not come into contact with charged parts). The contact block and lamp terminal can be easily mounted or removed with the terminal cover mounted. Dimensions, mm AR22/Pushbutton switches 80 Release arm (Extended) 2 (Flush) AR22 ZB, DR22 ZB AR ZB, DR ZB pecify ZB at the end of the type number of the standard type. Terminal screw M Accessories Contact block (plus terminal cover) NO contact: AR9B290-D NC contact: AR9B29-D Transformer unit (plus terminal cover) AR9T5- D DR22/Without transformer Terminal cover Ratings and specifications Protection degree: IP2X Terminal screw: M3.5 Wiring can be done with a solid wire or fork shaped crimp terminal. Note: Ring-type crimp terminals cannot be used. Other ratings and specifications are the same as those of the standard type. DR22/With transformer * 7.2 Applicable types AR22, DR22 series AR22 (except for joy stick selectors) DR22: Without transformer, with transformer (except for shortbody types, buzzers and numerical indicators) AR, DR series AR (except for joy stick selectors) DR: Without transformer, with transformer (except for D, short-body types, F4M, F4N, M4M types, buzzers and numerical indicators) Note: * Except for the types 0V AC, 27V AC and 220V AC. Note: The terminal of the standard type VG has IP2X protection. Fuji Electric FA Components & ystems Co., td./d & C Catalog /25

69 Pushbuttons/electors/Pilot ights/buzzers AR22/DR22 and AR/DR pecial products Metal nut (chrome plated) types Features The nut is a metallic ring (chrome plated). Other ratings and specifications are the same as those of the standard model. AR ZM DR ZM pecify ZM at the end of the type number of the standard type. Dimensions, mm ame as those of the standard types. Applicable types AR, DR series AR (except for G4, G9, GR*, GPR*, and B0R* types) DR with round bezel (except for IP54 buzzer type B8)* 2 Notes: * tandard type is a metallic ring (chrome plated). * 2 The nut of types DRB0, B5 and B6 buzzers are resin (chrome plated). Resisting sulfuration gas Features These products can be used in environments having a concentration of hydrogen sulfide gas of 0.5 ppm or less. The metallic parts have been subjected to an anti-corrosion treatment (see note). The contacts of the AR series are gold plated. Note: The body is made of resin and cannot be used with gases that affect resins (plastics). AR22 Z4, DR22 Z4 AR Z4, DR Z4 pecify Z4 at the end of the type number of the standard type. Notes on use This product is resistant to light corrosive gas exposure. Other measures, such as covering the entire switch with a box, and the degree of protection of the panel should be taken into consideration. ARE0R KK02-47A ZM KK02-48A KK02-49A ARPR ZM DRD0 ZM Ratings and specifications ydrogen sulfide gas concentration of 0.5 ppm max. Ambient storage temperature: 8 to C umidity: 62 to 8% Other ratings and specifications are the same as those of the standard type. Dimensions, mm ame as those of the standard types. Applicable types AR22, DR22 series AR22 (except for Joy stick selectors and VG type) DR22 (except for pilot lights with resistor unit, buzzers, and numerical indicators) AR, DR series AR (except for Joy stick selectors) DR (except for F4M, F4N, M4M types, pilot lights with resistor/resistor unit, buzzers and numerical indicators) /26 Fuji Electric FA Components & ystems Co., td./d & C Catalog