22mm Push Buttons and Switches

Transcription

1 PUSH UTTONS/SWITCHES 22mm Push uttons and Switches Emergency Stops Selector Switches Lever Type Small Head positions Large Head 3 positions unit: mm S2ER E3 R A D Size CONTACT LOCK * S2SR S 3 R A Type E2 E3 E4 E5 A D L Ø30mm Ø40mm Illuminated Ø40mm Ø60mm Normally Open Normally Closed 12~30V AC/DC 100~220V AC * Only available with sized E4 series. Knob type 2 Positions Single Fixed Position Lever type 2 Positions Single Fixed Position Knob type 3 Positions Double Auto Spring Return Lever type 3 Positions Double Auto Spring Return Knob type 3 Positions Double Fixed Position Lever type 3 Positions Double Fixed Position Knob Type unit: mm Color Contack block R W A 2A 2 A Red White 1 normally open block 1 normally close block 2 normally open blocks 2 normally close blocks 1 A lock & 1 lock Pilot Lamps L2RR L 1 R D Head Type 1 Dome Head 2 Horn Head 3 Flat Head unit: mm Dome Head Color R G Y W Red lue Green Yellow White D L 12~30V AC/DC 100~220V AC Horn Head Flush Head G1

2 Momentary Push utton S2PR - P1 R - A Color R G Y K Red lue Green Yellow lack unit: mm CONTACT LOCK A Normally Open Normally Closed Illuminated Push utton S2PR - P3 R - A D R Red Color G Y lue Green Yellow W White (Clear) unit: mm CONTACT LOCK A Normally Open Normally Closed * D L 12~30V AC/DC 100~220V AC Double Push utton Illuminated Auto Spring Return Type S2TR-P3WAD 12~30V AC/DC S2TR-P3WAD 100~220V AC unit: mm Specifications G2

3 PUSH UTTONS/SWITCHES uzzer 2N-1D Contact locks Normally Open Model SA-CA Specifacations Dimensions Rated Voltage/ Current Protection Sound Level Sound Mode Intermittent (defalt), Continuous Life (Electrical) Operation Frequency Endurance Impact No movement Vibration Operating Temperature Operating Humidity StorageTemperature locks Normally Closed Model SA-LD SA-LA SA-C Panel T= Max. 4mm Appearance Appearance Capacity Approval Accessories 110V AC 10A/ 220V AC 5A Operating Voltage 12~30V AC/DC 110~220V AC Current Consumption 4~10mA Life 50,000 hours Approval Flush Mount Adaptor Water Proof Cap Push button Flush Mount Adaptor Mounting panel Locking ring G3

4 Ø8,10,12 Switches/uttons K R Model Description l Operator m Contact Arrangement n Lens Color l m n 08 Ø08mm Control Switch 10 Ø10mm Control Switch 12 Ø12mm Control Switch 1 Pilot Lamp 2 Momentary 3 Alternative 7 Lighted Round 8 Lighted Square 9 Lighted Rectangular 0 None 1 SPST (1a+1b) 2 (2a+2b) R G Y W Red Green Yellow White lue K-Series Specifications Contact General Information Material Ag alloy 1A 24V DC Rated Norminal current 1A 120V AC (resistance load) 0.5A 240V AC Initial Carry Current 3A Maximum switch voltage 250V AC, 110V DC Minimum switching rating 100mA 5V DC Norminal Current 15mA Expected Life 50,000hrs Norminal Volatage 6, 12, 24V DC R, G, Y,, W Dielectric Strenth 2,000V AC 1Min. Mechanical Reset: Min 200,000 Expected Life Mechanical main Terence: Min 100,000 Electrial: Min 100,000 Degree of Protection IP40 Soldering temperature 20W 5sec/ 260 C 3sec Ambient Temperature -25 C ~ +55 C (with no icing) PUSH UTTONS/SWITCHES Dimensions Unit: mm Pre-Caution When using Ø8-, Ø10- and Ø12-small control switches as the main power switch for the control unit, follow the instructions below for ensure long life and safety of the device. Panel thickness A C K08 Series K10 Series K12 Series A C When rectifying the AC current for the DC power for lighting, the DC power must be a constant voltage source with a ripple range of 10 % or less. - Do not apply excessive impact or force to prevent damage to the product. - Excessively high soldering temperature and prolonged soldering time may lead to the damage to the product. Comply with the specifications. - The product has a built-in current limiting resistor, and no additional resistor is required. - The brightness of the lamp may decrease to 50 % of the initial level after its lifetime. * Specifications and materials may change to improve the product quality. G4

5 PUSH UTTONS/SWITCHES Ø16 Switches/uttons Features Specifications Push utton Mushroom Switches E-Stop Switches uzzers Contacts uzzer - 16 mm (5/8 ) Mounting Holes - IP 65 degree of protection (Water & dust proof) - Snap action contacts - Illuminated Mushroom & Selector switches for Round, square, rectangular heads -Useful quick connector (tap #110) or available solder socket or PC pin sockets - Available Flush mounting guide (Aluminum) Contact Arrangement (1C), (2C) Contact Material Ag Alloy (24K Gold plated) Rated Insulation Voltage 250VAC Rated Operating Current 3A MAX Max. On/Off Voltage 250VAC, 110VDC Rated Load 1A at 24VDC/ 120VAC, 0.5A at 250VAC Max. Applicable Load 1mA 5VDC Regular Voltage 24VDC, 12VDC, 6VDC, 110VAC Norminal Current 15mA Approx. Expercted Life 50,000hrs Sound 80d continous alert sound at 0.1m Voltage/Current 24VDC/15mA Approx. Style Operation Contact Momentary Maintained Round Momentary Square Maintained Momentary Maintained Rectangle Round Momentary Maintained Momentary Maintained Square Rectangle Round Round Rectangle Momentary Maintained Turn to Relaease Part Numbers Non Illuminated Illuminated K16-211ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K16-911H ㅁ K16-971H ㅁ-ㅁV K16-912H ㅁ K16-972H ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K16-921H ㅁ K16-981H ㅁ-ㅁV K16-922H ㅁ K16-982H ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K ㅁ K ㅁ-ㅁV K16-931H ㅁ K16-991H ㅁ-ㅁV K16-932H ㅁ K16-992H ㅁ-ㅁV K16-811R K16-812R K ㅁ V K ㅁ V 80d N/A K16-CZ K16-CZL- ㅁ V 80d N/A K16-Z K16-ZL- ㅁ V K16 Series General Spec Pilot Lamp Selector Switches Key Selector Switches Contact Resistance Max. 50mΩ Insulation Resistance 100MΩ at 500V DC Dieletric Strength 2,000VAC for 1 Min. Vibration Resistance 25~55Hz Dual amplitude : 0.75mm Shock Resistance Endurance: 500m/s², Operatin error: 200m/s² Push utton (release): Min. 1,000,000 Mechanical Selector, Key Selector: 250,000 Expected Others: Min. 100,000 Life Maintained: Min. 50,000 (frequency 1,200 times/hrs) Electrical Others: Min. 100,000 Ambient Temperature Operation: -25 C~ +55 C, Storage: -30 C~+80 C Ambient Humidity 45~85%RH Degree of Protection IP65 Terminal Soldering 20W 5sec / 260 C 3sec Style Operation Contact Part Numbers Round Square Rectangle Round Square Rectangle Round Square Rectangle Pilot Lamp N/A K ㅂ - ㅁ V Pilot Lamp N/A K ㅂ - ㅁ V Pilot Lamp N/A K ㅂ - ㅁ V 2 Step K K Step K Step K K Step K Step K K Step K Step K K Step K Step K K Step K Step K K Step K G5 * ㅁ (utton color) = R, G, Y,, and W (Red, Green, Yellow, lue, and White) * ㅁ V ( Voltage) = 6, 12, 24V DC & 110/220VAC with optional transformer

6 Dimensions Selector Switches Key Switches Pilot Lamps & Push uttons Round Type Round Type Square Type Square Type Rectangular Type Rectangular Type PUSH UTTONS/SWITCHES Round Type Square Type Rectangular Type Mushroom Type Push uttons Round Type Square Type Rectangular Type uzzers Round Type Rectangular Type Emergency Resets G6

7 PUSH UTTONS/SWITCHES Ø16 Switches/uttons F16 Series Features - 16 mm (5/8 ) Mounting Holes - IP 65 degree of protection (Water & dust proof) - Assemble up to 3 contact blocks (1 contact block :, 3A 110VAC, 24K Ag alloy) - Illuminated Mushroom & Selector switches for Round, square, rectangular heads - Quick connectors (tap #110) or available solder connection or PC pin sockets - Available Flush mounting guide (Aluminum) Pilot Lamps & Push uttons Product Category Type 1 Pilot Lamp 2 Momentary 3 Maintained 4 2 step selecor 5 3 step selector 6 2 step key selector 7 3 step key selector 8 E-Stop switch (Standard) 9 Momentary Mushroom Head A E-Stop (Name plate built-in) L Lever 1 Round 2 Square 3 Rectangular 7 Illuminated Round 8 Illuminated Square 9 Illuminated Rectangular F R 24-6 D l m n o p l Contact Arrangement m Head Color n Voltage 0 Pilot Lamp 1 SPST (1a+1b) 2 (2a+2b) 3 3P3T (3a+3b) R G Y W K Red Green Yellow White lue lack (Non-Illuminated type) 6 6VDC 12 12VDC 24 24VDC 110VAC available with 110 transformer F16-T1 No Voltage oreset type Manual Automatic pkey release position 2 Steps Ordering Code 2 0 A D 3 Steps Ordering Code A C D E F G Selector Switches Key Switches Emergency Resets Mushroom Type Push uttons Specifications General Specification Contacts Lamp Dielectric Strength Rated Insulation Voltage Contact Resistance Insulation Resistance btwn Charger & Earth btwn Charging sectors Vibration Resistance Shock Resistance Mechanical Expected Life Electrical Frequency of On/Off Ambient Temperature Ambient Humidity Degree of Protection Contact Arrangement Contact Material Rated Insulation Voltage Rated Operating Current Max. On/Off Voltage Rated Load Max. Applicable Load Head Shapes / Colors Rated Voltage Rated Current Expercted Life 250VAC/DC Max. 50mΩ 100MΩ at 500V DC 2,000VAC for 1 Min. 1,500VAC for 1 Min. Dual wave length 0.1mm (10~55Hz) Operation error: 100m/s², Durability 500m/s² Push utton (release): Min. 1,000,000 Others: 250,000 Min. 100,000 Min. 1,200 times/hr Operation: -20 C~ +70 C, Storage: -30 C~+80 C 45~85%RH (at -5~+40 C) IP65(water/Oil proof) - IP40 for Key and Selector Switches (1C), (2C), 3P3T (3a+3b) Ag Alloy (24K Gold tint) 250VAC 5A MAX 250VAC, 110VDC Resistance load (12VAC/DC) Induction load (13VAC/DC) 3A at 24VDC 0.7A at 24VDC 0.2A at 125VDC 0.15A at 125VDC 3A at 11-VAC 1A at 11VAC 1.5A at 250VAC 0.7A at 250VAC 10mA 5VDC Round, Square, Rectangular/ Red, Green, Yellow, lue, White 24VDC, 12VDC, 6VDC, 110VAC 15mA Approx. 50,000hrs G7

8 Dimensions Push uttons Selector Switches Pilot Lamps Round Type Round Type Square Type Rectangular Type Square Type Rectangular Type PUSH UTTONS/SWITCHES Round Type Square Type Rectangular Type Key Switches Round Type Square Type Rectangular Type Mushroom Type Push uttons Round Type Square Type Rectangular Type Emergency Resets G8

9 PUSH UTTONS/SWITCHES Accessories Protection Covers - Square Type (K Series Only) K16-S111ㅂ Protection Covers - Rectangular Type (K Series Only) K16-S112ㅂ Safety Guard K16-S221 ㅂ K16-S222 ㅂ K16-G1 K16-G2 K16-S115 ㅂ F16-S115 ㅂ F16-T1 K16-T1 G9

10 Hand Tools Fastener Sockets K16-S113 Terminal Protection K16-W1 Extractor K16-S114 Protection Cover K16-LR1 R Type Lens PUSH UTTONS/SWITCHES K16-S116 F16-S116 K16-S223 K16-S224 Contact lock Empty lock FC FE Flush Mounting Guide Switches shown with flush mounting guide G10

11 PUSH UTTONS/SWITCHES Ø22, 30 Switches/uttons K Series Features - 22 mm (4/5 ) Mounting Holes - IP 40 rating (IP65 optional) Water & dust proof) - Available Maintained Holder - Contacts for or, 10A 110VAC - Illuminated Mushroom & Selector switches for Round, square heads - Available Flush mounting guide (Aluminum) Dome TypePilot Lamp I/O Push uttons Push utton Push Selector Switch K 22-1 A R - RE 24 l m n o Hole Size Product Category l Head Type m Head Color 22 Ø22 30 Ø30 1 Pilot Lamp 2 Momentary 3 Maintained 4 2 step selector 5 3 step selector 6 2 step key selector 7 3 step key selector 8 E-Stop switch (Standard) 1 Round 2 Square 7 Illuminated Round 8 Illuminated Square 9 Illuminated Rectangular A Operator Round Operator Square R G Y W K Red Green Yellow White lue lack (Non-Illuminated type) General Spec Contact Lamp Key Switch Specifications Insulation Resistance Dielectric Strength Torque Degree of Protection 100MΩ at 500V DC 1,800VAC for 1 Min. 0.8N m (8.16kgf cm) IP40 E-Stop Switch Frequency of Alteration 30Minc. Ambient Temperature Operation: -25 C~ +70 C, Storage: -30 C~+80 C Contact Material Ag Alloy Voltage AC1 AC3 DC1 24V 10A 10A 6A Rated Current 48V 10A 10A 3A 110V 10A 6A 2A 250V 6A 4A 1A 440V 2A 1.5A - Expected Life Electrical Min. 200,000 hrs Mechanical Min. 2,000,000 (Emergency, Selector: Min. 500,000) Contact Resistance 50mΩ Filament 160mA AC Rated 15mA Current Filament 50mA DC 15mA Expected Life Filament Min. 1,000 hrs Min. 50,000 hrs n Operating Head Type o Voltage RE RF RX N29 N40 N65 AL C29 C40 C65 S2R S3LR S3L S3R L2R L3LR L3L L3R L DR Lifted Flat Pilot Lamp Flat Type Pilot Lamp Extended Type Pilot Lamp Ø29 Ø40 Ø65 AL Guard Full Guard Ø29 Full Guard Ø40 Full Guard Ø65 Metal Full Guard Ø29 Metal Full Guard Ø40 Metal Full Guard Ø65 2 Step Auto Return Knob 3 Step oth Auto Return Knob 3 Step Left Auto Return Knob 3 Step Right Auto Return Knob 2 Step Auto Return Lever 3 Step oth Auto Return Lever 3 Step Left Auto Return Lever 3 Step Right Auto Return Lever Lever Type Arrow Marked None - No Voltage 24VDC 110VDC 110VAC 220VAC G11

12 Dimensions K22 Series K30 Series ody Momentary Maintained 15.0 Push Selector (K22 Series Only) Push uttons PUSH UTTONS/SWITCHES Maintain Holder Illuminated Push uttons K22 Series Roun ody DC Squar Flat AC I/O K30 Series Extended Flat G12

13 PUSH UTTONS/SWITCHES Illuminated/Non-Illuminated Full Guard Push uttons Non-Illuminated Switch ody Illuminated Switch ody DC ody AC ody Illuminated*/Non-Illuminated Selector Switches (*Available only with Knob Type) 2 Step Knob Type 3 Step 2 Step Lever Type 3 Step Round K22/30 Series Square K22 Series Only K22 Series K30 Series G13

14 Non-Illuminated Switch ody Illuminated*/Non-Illuminated Selector Switches (continued) Illuminated Switch ody DC ody AC ody Illuminated/Non-Illuminated E-Stop Switches Non-Illuminated Switch ody PUSH UTTONS/SWITCHES K22 Series Illuminated Switch ody DC ody AC ody K30 Series Key Selector K22 Series K30 Series Panel Widhth G14

15 PUSH UTTONS/SWITCHES Illuminated/Non-Illuminated Mushroom Push uttons K22 Series K30 Series Non-Illuminated Switch ody Illuminated Switch ody DC ody AC ody Pilot Lamps Dome K22 Series Dome K30 Series ody DC Flat K22 Series Extended K22 Series AC Square K22 Series G15

16 Contact lock CA: 1A Contact C: 1 Contact Replacement Parts Maintain Holder KAL PUSH UTTONS/SWITCHES A9S: Ø9mm A7S: 7mm 6.3VDC 24VDC G16

17 PUSH UTTONS/SWITCHES Ø25, 30 Switches/uttons Series Pilot Lamp Illuminated Push uttons Push uttons Selector Switches - l m - n o Hole Size Operation Type l Operating Head Type m Lens Color n Operating Head Type 25 Ø25 30 Ø30 1 Pilot Lamp 2 Momentary 4 2 step selector 5 3 step selector 6 2 step key selector 7 3 step key selector 8 E-Stop switch (Standard) 1 Round 7 Illuminated Round A Operator Round R G Y W A N40 N H65 F65 C65 S L K EG Red Green Yellow White lue Water proof Mushroom Push Ø40 Mushroom Push Ø65 Full Guard Ø40 Full Guard Ø65 Metal Portable Ø65 Metal Full Guard Portable Ø65 Meta Halfmoon Guard Ø65 Knob Type Selector Lever Type Selector Key Switch Halfmoon Guard Key Selector Switches E-Stop Switches o Voltage 24VDC 110VDC 110VAC 220VAC Specifications Mushroom Push uttons Portable Push uttons General Specification Norminal Current Frequency of Alteration Nominal Rating Contact Resistance Insulation Resistance Mechanical 10A 250VAC Max. 50mΩ 100MΩ at 500V DC 30 operation/min Electrical 30 operation/min btwn Charging sectors 1,800VAC/Min. (50~60Hz) btwn charger & earth 2,500VAC/Min. (50~60Hz) Mechanical 500,000 times Electrical 100,000 times Degree of Protection IP63 (Optional IP65) Ambient Temperature Operation: -25 C~ +70 C, Storage: -30 C~+80 C Ambient Humidity 35~80% RH Norminal AC Approx. 15mA Current DC Approx. 15mA Voltage 24VAC Expected Life Min. 50,000 hrs Contact Material Ag Alloy Dielectric Strength Expected Life Rated Current Voltage AC1 AC3 DC1 24V 20A 10A 6A 110V 16A 8A 1.2A 250V 10A 5A 0.5A 440V 5A 2.5A 0.25A G17

18 Dimensions Ø25 Ø25 Ø25 Knob Type Ø30 Knob Type Ø30 Ø30 Push uttons Illuminated Push uttons Selector Switches PUSH UTTONS/SWITCHES 2 Step 3 Step Ø25 Lever Type Ø30 Lever Type 2 Step 3 Step Key Switches Ø25 Ø30 2 Step 3 Step G18

19 PUSH UTTONS/SWITCHES E-Stop Switches Ø25 Ø30 E-Stop Switches (water proof)/ Latch Type E-Stop Switches Ø25 Ø30 Mushroom Push uttons Ø25 Ø30 Portable Push uttons Ø30 Halfmoon Guard Ø30 Full Guard Ø30 G19

20 Description T19 Series T R - 6VDC l m n 1 Pilot Lamp 2 Momentary 3 Maintained Illumination 7 Round l Operator m Color 7 None 8 SPST (1a+1b) 9 (2a+2b) R G Y O W Red Green Yellow lue Orange White Dimensions PUSH UTTONS/SWITCHES n Voltage 6VDC 12VDC 24VDC 110VAC 220VAC T16, 22, and 30 Series will be available soon Specifications Wiring Diagram Contact Resistance Max. 50mΩ Insulation Resistance Min. 100MΩ at 500V DC Dielectric Strength 2,000VAC for 1 Min. Vibration Resistance 5~55Hz dual amplitude : 0.75mm Shock resistance Operation error: 200m/s², Durability 500m/s² General Specification Expected Life Mechanical Electrical Momentary: Min. 1,000,000 Maintained: Min. 250,000 Momentary: Min. 100,000 Maintained: Min. 50,000 Frequency of On/Off 1,200 times/hr Ambient Temperature Operation: -25 C~ +55 C, Storage: -30 C~+80 C Ambient Humidity 45~85%RH (at -5~+40 C) Degree of Protection IP65 Terminal soldering temperature 20W 5Sec / 260 C 3Sec Contact Arrangement (1C), (2C) Contact Material Ag Alloy (24K Gold tint) Regular Insulating Voltage 250VAC Contacts Max. Applicable Current Max. Switching Voltage 3A MAX 250VAC, 110VDC SPST (1a+1b) Rated Load 1A 24VDC / 120VAC 0.5A 250VAC Min. Applicable Load 1mA 5VDC Color Red, Green, Yellow, lue, Orange, White Lamp Appearance Regular Voltage Norminal Current Round 24VDC, 12VDC, 6VDC, 110VAC, 220VAC 15mA Approx. Expercted Life 50,000hrs (2a+2b) G20