K12 High Performance Key Switches
|
|
- Hugo Fleming
- 5 years ago
- Views:
Transcription
1 High Performance Features/Benefits Typical Applications Excellent tactile feel Automotive Wide choice of LE colors, Off-road transportation travel and actuator forces Industrial electronics High reliability / long life Computers & network equipment Sealed version available esigned for low-level switching ouble stroke version available etector version available Construction: FUNCTION: momentary CONTACT ARRANGEMENT: 1A (1 make contact = SPST) NO 1R (1 break contact) NC by request 2A (make contact) = 2 X SPST for GO ISTANCE BETWEEN BUTTON CENTERS: min. 11 (0.433) C = 13 (0.512) TERMINALS: PC pins, tinned MOUNTING: Locating pins;, G and P additionally with snap-in housing Mechanical TOTAL TRAVEL: 1 mm, mm, 2 mm SWITCHING TRAVEL: 0,6 mm* OPERATING FORCE: 1.5 N O without snap-point as detector switch, 2.5 N, 3.5 N, 5 N, 3.5/7 N, 6/12 N PROTECTION CLASS: C IP 67 (dust tight, protected against the effects of immersion in water; other versions IP 50) Electrical SWITCHING POWER MIN./MAX.: 0.02mW/3 W SWITCHING VOLTAGE MIN./MAX.: 2 V C / 30 V C SWITCHING CURRENT MIN./MAX.: 10 µa /100 ma IELECTRIC STRENGTH (50 Hz, 1 min): 500 V OPERATING LIFE with max. switching power: 10 6 operations G & GO; operating life of second switch 5 x 10 4 operations CONTACT RESISTANCE: Initial 50 mω INSULATION RESISTANCE: Ω BOUNCE TIME: 1 ms Operating speed 400 mm/s (15.75/s) Environmental OPERATING TEMPERATURE: -40 C to 85 C. STORAGE TEMPERATURE: -40 C to 95 C. Process SOLERABILITY: Max. soldering time and temperature: 5 s at 260 C * Additional switching travel (with pre-travel) available by request How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. 1 2 L Series P With snap-in pegs PL With central LE Snap-in peg wih LE holder L Snap-in pegs with LE C Sealed contact with rubber cap (IP 67) GO Twin contacts without side LE holder A Cap Color NONE version with LE B Black cap - No LE LE Color** NONE No LE GN Green YE Yellow OR Orange R Red WH White BU Blue Travel 1 1 mm (0.039) * mm (0.059) 2 2 mm (0.079) Operating Force 1.5N O 1.5 N without snap-point 2.5N 2.5 N 3.5N 3.5 N 5N 5 N 3.5/7N3.5/7 N *** 6/12N 6/12 N *** LE Reference L306 Green L327 Yellow L315 Orange L352 Red L302 White L328 Blue * P version only ** Additional LE colors available by request *** G & GO version only imensions shown in: mm (inch) imensions subject to change -6
2 High Performance P total travel 1, or 2 (.0394,.0591 or.0787) 9,0 (.354) PCB layout, mounting side (.059) 11,0 (.433) (.295) 2,6 (.103) (.007) 3,5 (.138) ø1,0 (.0394) (.059) 2,9 (.1141) 1 (.492) 1,2 (.047) 9,6 (.378) (.148) center of actuation area (notice LE) 12,0 (.472) 9,8 (.386) 10,9 SQ. (.429) Hole Ø Without LE escription Terminal Section Surface 1,7 (.069) 2x snap-in 1,6 (.062) 1x coding hole (L,M,N) 1,1 (.043) 2x center hole Sn 0,9 (.035) LE m0.5 (.020) Sn 2x switch 0.7 x 0.2 (.028 x.081) PL 5,5 (.217) pin ø 1.1 (.0433) for coding of LE color ø3,0 (.118) 11,0 (.433) PCB (.0591) total travel 1 or (.0394 or.0591) 3,6 (.141) PCB layout, mounting side 2,6 (.103) LE (.295) 9,6 (.378) (.007) 2,6 (.148) coding pin L 5,6 (.22) ø4,6 (.181) center of actuation area (notice LE) Hole Ø Without LE escription Terminal Section Surface 1,7 (.069) 2x snap-in 1,6 (.062) 1x coding hole (L,M,N) 1,1 (.043) 2x center hole Sn 0,9 (.035) 2x LE m0.5 (.020) Sn 2x switch 0.7 x 0.2 (.028 x.081) imensions shown in: mm (inch) imensions subject to change -7
3 12,0 (.472) 2,9 (.114) 2,9 (.114) 5,5 (.217) (.0078) High Performance C Sealed contact with rubber cap (IP 67) total travel 1,0 (.0394) ø12,8 (.504) PCB LAYOUT, MOUNTING SIE (.295) 1,8 (.0709) 1,2 (.047) 5,0 (.197) 2,3 (.090) 12,0 (.472) 10,9 (.429) 10,9 (.429) actuation area A SCHEMATIC R Hole Ø Without LE With LE escription Terminal Section Surface 1,1 (.043) 2x 2x center hole 0,9 (.035) 2x LE m0.5 (.0204) Sn 2x 2x switch 0.7 x 0.2(.0275 x.0787) Sn imensions shown in: mm (inch) imensions subject to change -8
4 High Performance L total travel 1mm, mm (0.0394, ) (0.059) L ø 3 (0.1181) PCB LAYOUT, MOUNTING SIE (0.295) 3 (0.1181) 1,2 (0.047) 12 (0.472) ø 1 (0.0394) 5 (0.197) 9,8 (0.386) SQ. 10,9 (0.428) (0.059) (0.354) (0.433) (0.197) 2,9 (0.114) 5,5 code pin ø1,1 ø 5,6 (0.220) 11 (0.433) (0.0433) (0.0591) PCB LE 3,6 (0.141) 2,3 (0.090) 9,6 (0.378) (0.295) 2,3 (0.090) 9,6 (0.378) 1,25 (0.0492) (0.0078) (0.0078) 4 (0.100) (0.148) 6,27 (0.247) (0.148) L 6 1,3 (0.236) (0.051) actuation area SCHEMATIC L A R A+L Hole Ø Without LE With LE escription Terminal Section Surface 1,7 (.069) 2x 2x snap-in 1,6 (.062) 1x 1x coding hole (L,M,N) 1,1 (.043) 2x 2x center hole 0,9 (.035) 2x LE m0.5 (.020) Sn 2x 2x switch 0.7 x 0.2 (.028 x.081) Sn imensions shown in: mm (inch) imensions subject to change -9
5 High Performance GO GOL GO GOL PCB LAYOUT, MOUNTING SIE (0.138) 3,5 total travel mm ø 9,8 SQ. 10,9 (0.386) (0.428) (0.0591) (0.059) (0.354) 2, (0.472) (0.114) 11 (0.433) < = 5,5 (0.217) ø 3 (0.118) PCB code pin ø1,1 (0.043) ø 4,6 (0.187) 5,6 (0.228) (0.0591) (0.295) (0.295) 3,6 (0.142) LE 5 (0.197) 2,6 (0.103) 9,6 (0.278) 5 (0.197) 2,6(0.103) 9,6 (0.278) (0.0078) 4 (0.100) (0.148) (0.0078) (0.148) 6,27 (0.247) GO GOL 6 (0.244) 1,3 (0.053) (LE) actuation area Hole Ø Without LE With LE escription Terminal Section Surface SCHEMATIC G GL 1,7 2x 2x snap-in (.069) 1,6 1x 1x code (.062) 2x 2 LE Sn 0,9 2x LE m0.5 (.020) Sn (.035) 2x 2x switch x 0.3 (.028 x.012) Sn 2x 2x switch x 0.2 (.028 x.081) Sn imensions shown in: mm (inch) imensions subject to change -10
6 High Performance A 9,95- End Position 10,45±0,15 Switching Travel 11+0,15/-0,05 PCB LAYOUT, MOUNTING SIE 2,6 ø12 4 1,4 9 ø1 2,9+0,3/- PCB () ø9,8 10,9 SQ. SCHEMATIC Hole Ø Without LE With LE escription Terminal Section Surface 1,1 (.043) 2x 2x center hole 0,9 (.035) 2x LE m0.5 (.020) Sn 2x 2x switch 0.7 x 0.2 (.028 x.081) Sn imensions shown in: mm (inch) imensions subject to change
7 High Performance CAP COLOR OPTION COE NONE B COLOR Version with LE Black LE COLOR OPTION COE NONE GN YE OG R WH BU COLOR Models without LE Green Yellow Orange Red White Blue TRAVEL 1 1 mm mm 2 2 mm OPERATING FORCE OPTION COE OPERATING FORCE 1.5N O 1.5 N,150g without snap-point 2.5N 2.5 N, 250g 3.5N 3.5 N, 350g 5N 5 N, 500g 3.5/7N 3.5/7 N, 350/700g 6/12N 6/12 N, g LE REFERENCE OPTION COE L306 L327 L315 L352 L302 L328 COLOR Green Yellow Orange Red White Blue imensions shown in: mm (inch) imensions subject to change -11
8 High Performance BUTTONS AVAILABLE Buttons must be ordered separately. Shipped in bulk. A B 6,4 (.252) 9,5 (.374) 12,8 (.504) 15,9 (.626) 0,7 (.0276) 10,4 (.409) B B 6,0 (.236) 8,0 (.315) (.0984) 14,1 (.555) 6,0 (.236) 16 (.630) 2,0 (.0787) 4,5 (.177) imensions shown in: mm (inch) imensions subject to change -12
K12 High Performance Key Switches
High Performance Features/Benefits Typical Applications Excellent tactile feel Automotive Wide choice of LE colors, Off-road transportation travel and actuator forces Industrial electronics High reliability
More informationK12 High Performance Key Switches
Features/Benefits Excellent tactile feel Wide choice of LE colors, travel and actuator forces High reliability / long life Sealed version available esigned for low-level switching ouble stroke version
More informationKSA & KSL Series Sealed Tact Switch
Specification CONTACT ARRANGEMENT: SPST, N.O. DOULE OVERMOLDING ON TERMINAL SEALING: IP6 TERMINALS: PC pins, ground pin optional Mechanical Actuation force Operating life Travel to Type N (operations)
More informationKSC Series Sealed Tact Switch for SMT
KSC Series Features/Benefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
More informationKSA & KSL Series Sealed Tact Switch
Features/enefits Designed for automatic or manual insertion Cambered terminals to ensure self retention Top or side actuated Large choice of caps RoHS compliant and compatible Specification CONTACT ARRANGEMENT:
More informationSeries KMX KMR 2-4 KMS PTS525 KSR KSS KST. 4,6 x 2,8 6,4 x 5,25 7,15x3,8 7,3x3,8 7 x 3, , , ,000
Product Selection Guide Surface Mount Series KMX KMR 2-4 KMS PTS525 KSR KSS KST Size on PC L x W (mm) 4,1 x 4,1 4,6 x 2,8 4,6 x 2,8 6,4 x 5,25 7,15x3,8 7,3x3,8 7 x 3,5 J G 6,8x6,2 10x6,2 Total Height (mm)
More informationKSB & KSF Series Low-profile Tact Switch
KS & KSF Series Low-profile Tact Switch Features/enefits Low profile Protected against flux KS without top sealing KSF with top sealing RoHS compliant and compatible Typical Applications Low profile keyboards
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More informationPTS645 Series 6 mm Tact Switches
PTS5 Series mm Tact Switches Features/enefits Compact size x mm Variety of actuator lengths Choice of actuation force RoHS compliant and compatible Typical Applications Consumer products Instrumentation
More informationMechanical Key Switch
Mechanical Key Switch B3F A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical and High-force. Excellent tactile feel combined with high life expectancy. Available in stick packaging for automatic mounting
More informationELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More informationRTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications
More informationHigh-force: 230 g. Projected 7.3 mm General-purpose: 160 g. High-force: 230 g. Flat 4.3 mm General-purpose: 200 g.
Tactile Switch BW Tactile Switch with Sealed Construction for Automatic Soldering Sealed construction conforming to IP67 (IEC-6059) provides high reliability in locations exposed to dust or water. Available
More informationSERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 0 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle mechanical life endurance up to 1 million switching cycles Wide variety Variants with IP 67 or dust protection insert Two
More informationELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67
PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices
More informationB3F. Miniature, Space-saving Switch
B3F Miniature, Space-saving Switch Long mechanical / electrical service life Ideal for applications such as audio, office and communications equipment, TVs, etc Taped radial, vertical, high-force, and
More information1 change over contact. 1 make contact. 1 break contact
Uni Uni is one of the smallest two pole switches available today. The are capable of producing eight functions depending on PC board layout. The Uni switch is available in momentary and alternate action
More informationMiniature Switches & Pilot Devices
A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and
More information8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
More informationFunctions The Series 19 incorporates the following functions: Indicator Pushbutton Illuminated pushbutton
Edition 11/2013 HMI-Components 19 Series Characteristics The compact 8 mm Series 19 is especially suited for: Raised design PCB (with adaptor) The low level switching element is laid out for low current
More informationTwo case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
More informationLighted Pushbutton Switch
Lighted Pushbutton Switch General Purpose and Micro-Voltage/Current Load Switch Requires only 22 mm mounting depth All LEDs, lamps, legends and pushbutton units replaceable without tools Oil-resistant
More informationAttractive rugged rocker switch
istinctive features Attractive rugged rocker switch UG0AR Removable actuator Easy to stock Easy to customize Uptodate rocker design Smooth curves Wide choice of colours and symbols Laser etched symbols
More informationLUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, Click quick-assembly feature 1-29 LUMOTAST 25 selector switch, ring nut fixing 1-29
General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp socket
More informationSERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants ON REQUEST Other
More informationRTBH Series 1-2 Pole Coded Rotary Switches
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
More informationET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
More informationGeneral Purpose Relay
General Purpose Relay KML 15A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 to 3 pole configurations 1. COIL DATA (at 23 ) 1)
More informationC&K DA Series Miniature Single Pole Rocker Switches
Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and
More informationTURQUOISE SWITCHES J TYPE (ABJ)
HIGH ENVIRONMENTAL RESISTANCE TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch type)
More informationTURQUOISE SWITCHES J TYPE (ABJ)
HIGH ENVIRONMENTAL RESISTANCE ABJ1,2,3,4,5 TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationGeneral Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
More informationC&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
More informationC&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
More informationDATA SHEET. Approx. 65% relay volume of ET1 Approx. 50% relay space of ET1 Approx. 78% relay weight of ET1. For Proper Use of Miniature Relays
DATA SHEET AUTOMOTIVE RELAYS DESCRIPTION The new NEC EX/EX series is PC-board mount type and the most suitable for various motor and heater controls in the automobiles which require high quality and high
More information18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationL1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel
Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.
More information13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
More informationKiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red.
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 8VDC Mechanical Life: 200,000 Cycles Electrical Life: 50,000 Cycles Contact Resistance:
More informationIP series Latching action pushbutton switches for harsh environments
Latching action pushbutton switches for harsh environments Distinctive features and specifications Latching action Actuator remains in the low position when ON. Illuminated and non-illuminated Compact
More informationø8 A8 Series Miniature Control Units
A8 ø8 A8 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
More informationDATA SHEET. For Proper Use of Miniature Relays
DATA SHEET AUTOMOTIVE RELAYS EX/EX SERIES DESCRIPTION The new NEC EX/EX series is PC-board mount type and the most suitable for various motor and heater controls in the automobiles which require high quality
More informationC&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
More informationE Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
More information8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C ogic evel (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA ~ 0.1A
More informationSelection guide - Section B1 «I» range
Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1
More informationIndustrial Relay KML(1C, 2C)
Industrial Relay KML(1C, 2C) Features 1C: 15A, 2C: 10A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 & 2 poles configurations
More information22mm Push Buttons and Switches
PUSH UTTONS/SWITCHES 22mm Push uttons and Switches Emergency Stops Selector Switches Lever Type Small Head 71.4 2 positions Large Head 3 positions unit: mm S2ER E3 R A D Size CONTACT LOCK * S2SR S 3 R
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
More informationGeneral_technical_data Series
Emergency-stop Switching system The double-break switching system can be supplied for the following switching functions: 1 Normally closed, 2 Normally closed, 1 Normally closed + 1 Normally open. The Normally
More information8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
More informationFeatures. * 2 Form C contact. * High switching capacity 60W, 125VA. * Fit standard 16 pin IC socket. * Epoxy sealed for automaitc-wave COIL
JRC-27F SUBMINIATURE DIP RELAY Features File No.:E133481 * 2 Form C contact * High switching capacity 60W, 125VA * Fit standard 16 pin IC socket * Epoxy sealed for automaitc-wave soldering and cleaning
More information7000 SERIES ROCKER AND PADDLE SWITCHES Overview
Overview 7 SERIES Number of poles Terminals 3 Single pole 4 Double pole onsult factory for three and four pole models. Blank W WW Y } Y4 } Y6 } Y7 } Z Solder lugs or straight P depending on model Right
More informationT75S5D Product Details
T75S5D112-12 Product Details Industrial Relays (General Purpose) Converted to EU RoHS but not ELV Compliant (Statement of Compliance) T75S5D112-12 TE Internal Number: 1393223-3 Active Product Highlights:
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
More informationC&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
More informationPushbutton Switches Sub-Miniature
Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing
More informationSwitches- and Indicators
Switches- and Indicators Contents Description... 3 Product Assembly... 4 Mounting instruction... 6 Devices raised mounting... 7 Devices flush mounting... 9 Accessories... 11 Technical Data... 25 Drawings...
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationTURQUOISE SWITCHES ABJ TYPE
HIGH ENVIRONMENTAL RESISTANCE ABJ1,2,3,4,5 TURQUOISE SWITCHES ABJ TYPE.5 12.8 Dust protected type Iersion protected type (wire leads bottom type) (Mounting hole 2.3 type) (Mounting hole 2.3 type) FEATURES
More informationBright illumination face and snap-action switching.
ø A2 Series ø10 A1 Series ø8 A8 Series A2 Series A1 Series A8 Series Bright illumination face and snap-action switching. See website for details on approvals and standards. Hole Size Model Function Degree
More informationTactile Switch (Hinged Type)
Tactile Switch (Hinged Type) Hinged Design Developed through Ergonomics Quick, superior snap action through hook-type hinge construction. Available with 1 or LEDs or without LEDs. The hinge button is available
More informationTURQUOISE STROKE SWITCHES
ULTRA-LONG STROKE, HIGH CONTACT RELIABILITY SEALED SWITCHES (SAME SIZE AS J TYPE) ASQ1 TURQUOISE STROKE SWITCHES 9.6 13.3 FEATURES (mm) http://panasonic-denko.co.jp/ ac/e/service/environment 1. Same size
More informationSERIES 16, 18, 26 & 19N MICROSWITCH RANGES
SERIES 16, 18, 26 & 19N MICROSWITCH RANGES SERIES 16, 26 & 18 - MICROSWITCH SERIES 16 & 26 FEATURES Form Z contacts to cover all switching requirements Snap action for positive switching Solder terminals
More informationIQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting
Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons
More information8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
More informationGeneral Purpose Relays Industrial Relays. Power Relay RM 2/3/7
Power Relay RM 2/3/7 n 2/3 pole 10/16A, 2 form C (CO) or 3 form C (CO) contacts n Switching capacity up to 6000VA n DC or AC coil n Mechanical indicator n Push-to-test button n Plug-in version, PCB terminals,
More informationType Plunger Switch height Operating force Model Without ground terminal With ground terminal. 5.0 mm General-purpose: 100 g 150 g
Tactile Switch BF Miniature, Space-Saving Tactile Switch Provides Long Service Life and Easy Mounting Extended mechanical/electrical service life: 0 x 0 6 operations for x mm type and x 0 6 operations
More informationGeneral Purpose Relays Power Relays. T9G series, DC coil 30A PCB Relay
T9G series, DC coil 30A PCB Relay n 30A switching in NO and 20A in CO n Minimum Board space (29mm x 21.5mm) n Meets UL 508 for clearance / creepage n Meets IEC 61810-1 for reinforced insulation n Option
More informationMomentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
More informationVarious rocker colours. Illuminated or non-illuminated ELECTRICAL SPECIFICATIONS
00 series istinctive features and specifications Three rocker shapes : plain, Vshaped or concave Various rocker colours Frame with protection guard on 00LP models Illuminated or nonilluminated UL, CSA,
More informationPower PCB Relay. Type Contact material Contact form Construction Part number General purpose AgCdO SPDT Semi-sealed G2R-1
Power PCB Relay Creepage distance of 8.0 mm (0.31 in) min. between coil and contact Dual-winding latching type available Plug-in and quick-connect terminals available High sensitivity (360 mw) and high
More informationSERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC ROCKER SWITCHES PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants
More informationD2SW-AQ. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend
Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive
More informationFeatures. Type List. Enclosure style. Terminal style. Contact. Sealed type washable. form Dust cover Flux tight
Features Mini ISO automotive relay. SPNC, SPNO, SPDT, DPNO contact configurations. NO contacts switch A resistive load, NC contacts switch A resistive load, 0,000 ops., 3 C. Operating ambient temperature
More informationSERIES SUBMINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection
More informationEmergency Stop Switch A165E. Ordering Information. Mounting Aperture of 16 mm
Emergency Stop Switch Mounting Aperture of 16 mm Modular construction, easy installation Positive opening mechanism with minimum contact separation of 3 mm in accordance with EN60947-5-1, Conforms to EN418
More informationLighted PushButton Switch
Lighted PushButton Switch Cylindrical 8mm dia. Subminiature Series Featuring Short Mounting Depth Round, square and rectangular LED pushbutton units. types also available. Requires only 18mm mounting depth.
More informationRoHS. Specifications. Part Number Configurator
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 48VDC Electrical Life: 50,000 Cycles Contact Resistance: 50mΩ Max. Insulation Resistance:
More informationSealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
More informationSERIES SINGLE AND DOUBLE-POLE PUSHBUTTON SWITCHES
PRODUCT FEATURES Illuminated and non-illuminated pushbutton switch Proven jump contact switching system (double interrupting) Opening and closing speed independent of the actuating speed Product-dependent
More informationToggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
More informationPosition Switches Series 8074/2
www.stahl.de > Ex e metal enclosure > Operating temperature range -40 C... +70 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 > Extensive assortment of actuators,
More informationSERIES MINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES The precise mounting of the moving contact part (milled bearing blade) offers optimum snap-action even with slow actuation Wide range of ratings from 3 (1) A 250 V AC to 21 (8) A 250 V
More informationCommon features. Installation options. Aesthetic options
New! LPI series Distinctive features and applications UG1006-A Common features Large ergonomic actuator (Ø 35 mm) Tactile feedback Low behind-panel depth (21 mm max.) Stylish design Long life This series
More informationSwitches & Pilot Devices
Key features: Two button sizes: ø29 and ø4mm ead-free, ohs compliant, (EU directive 22/95/EC) Depth behind the panel: Standard - only 27.9mm for 1 to 4 contacts Unibody - only 23.9mm for 1NC or 2NC IDEC
More informationø10 A1 Series Miniature Control Units
A1 ø10 A1 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
More informationET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
More informationET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
More informationAV series Anti-vandal and security pushbutton switches
Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism
More information5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
More informationET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
More informationGeneral Specifications
Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity
More informationEP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
More information