1 change over contact. 1 make contact. 1 break contact

Size: px
Start display at page:

Download "1 change over contact. 1 make contact. 1 break contact"

Transcription

1 Uni Uni is one of the smallest two pole switches available today. The are capable of producing eight functions depending on PC board layout. The Uni switch is available in momentary and alternate action models with standard silver or optional gold for low level switching. Switch Momentary action Alternate action Silver standard (Gold and Hi temp versions also available) 15.5xx switch with large cap Cap xx (colour) 15.5xx Switch with small cap Cap xx (colour) 15.5xx Switch with small cap and bezel Cap xx (colour) Bezel xx Colour Chart Wiring Diagram Select the contact function you desire - and design your PC board accordingly Blue 01 - Brown 02 - Green 03 - Grey 04 - Yellow 05 - Gold 06 - White 07 - Orange 08 - Red 09 - Black 1 make contact 1 break contact PCB Mounting Hole Dimensions ÿ= change over contact 2 make 2 break 2 change over 2 make and 2 break reverse polarity UNIMEC Technical (silver ) Contact resistance: Max. 100mΩ Recommended load: Min. 0.5mA, Max. 250mA Contact bounce: Max. 10ms Actuation force: 2.5N Key travel: 1.8mm Life time: Momentary 1,500,000 cycles Alternate 500,000 cycles Working temperature: Min. -25C, Max. +75C Sealing: IP-54 Illuminated Vario Support Toggle switches For illuminated & Toggle versions, vario supports & blanking caps please ask for a full MEC catalogue.

2 Multi Advanced sealing techniques and state of the art plastic materials are used to ensure maximum electrical and hanical reliability, even in the most demanding environments. Multi switches are available in either through-hole mounting or surface mount. Basic switch modules provide the basis for assembly of a wide variety of options to produce both illuminated and nonilluminated switches. The versatility of the Multi switches offers the designer great flexibility in creating unique front panel designs. A 1mm actuator travel combined with a 2.5N actuation force, (250g), provides a strong audible tactile feel throughout the 10 million cycle hanical life of the switch. An increased actuation force is available as an option. All Multi switches are sealed to IP-67M specifications and are available with either silver or optional gold and in standard or high temperature models. The parts listed are high temperature and have silver. 3C Switch standard height 6.4mm Switch - 3CTH9 3C SMT Switch standard height 6.4mm Switch - 3CSH9 3E Switch variable heights Switch - 3ETH9 Extension actuators 3E-8.0 3E-9.5 3E E E-1 3E SMT Switch variable heights Switch - 3ESH9 Extension actuators 3E-8.0 3E-9.5 3E E E-1 3F Switch for various caps Switch - 3FTL6 Shown with 1D cap Switch can be fitted with 3mm LED for illumination 3F SMT Switch with round cap Switch - 3FSH9 PCB Layouts (top view) 3AT, 3CT, 3ET, 3FT Plus LED 3CS, 3ES, 3FS

3 3A Switch with cap Cap - 1Axx (colour) 3A Switch with cap and bezel Cap - 1Bxx (colour) Bezel - 2Axx (colour) 3A Switch with cap and illuminated bezel Cap - 1Bxx (colour) Bezel - 2Bxx1 (colour) LED -Any 3mm 3F Switch with square cap Switch - 3FTL6 Cap - 1Kxx (colour) PCB Mounting Hole Dimensions Through-Hole Multi Technical Contact resistance: Max. 30mΩ Recommended load: mA 24VDC Contact bounce: Max. 2ms Actuation force: 2.5N Key travel: 1mm Life time: >10,000,000 cycles Working temperature: Min. - 40C, Max +160C Sealing: IP-67 Circuit Diagram - + Colour Chart 00 - Blue ON/OFF 02 - Green 03 - Grey 04 - Yellow 06 - White 08 - Red 09 - Black Illuminated Mylar panel Legends For surface mount, illuminated and mylar panel versions as well as available legends, please ask for a full MEC catalogue.

4 500 Series Order code: 500/BK switch 500 switch 501 switch 500 switch with 509 cap 501/BK switch 509/ colour cap to fit 500 switch 508/ colour cap to fit 500 switch Body: Noryl SE1-GFN2 black colour Contacts: Brass 1.5 µ Ni = 2.8 µ Ag plated Spring: Bronze 2.8 µ Ag plated Mechanical function: Momentary click Contact rating: 20 ma / 35V DC Contact resistance: < 25 m Ω Operating temperature: -20 = 70 C Bounce time: < 2 ms Operating force: 1.2 ( ) N Restoring force: 0.8 ( ) N Operating travel: 0.7 (+0-0.2) mm Operating life: >250,000 cycles Inter terminals capacity: <0.9 pf 510 LED holder Cap Colours BK Black RD Red DG Dark grey Other colours are available Caps are suitable for engraving (BOTTOM VIEW) DTSM-6 (SMT) Contact Style: Tactile feedback Operating Force: 70g to 520g versions available Travel: mm Contact Resistance: 100mΩ max Order Code Height (mm) Operating Force (g) DTSM-61-N ± 50 DTSM-62-N 160 ± 50 SWITCHING DIAGRAM PC MOUNTING Other heights and styles are also available. Please ask.

5 KPT-1105 Series PCB Layout Switching Diagram Operating force: 120 ±30g Travel: 0.25 ± 0.1mm Order Code Height L KPT-1105D KPT-1105A KPT-1105B KPT-1105L 4.3mm mm 9.5mm mm Other heights also available. Please ask. KPT-1105 Series (Right Angle) PCB Layout Switching Diagram Operating force: 120 ±30g Travel: 0.25 ± 0.1mm Order Code KPT-1105V KPT-1105S Length L 1.4mm 5.9mm Other lengths also available. Please ask KPT-1104 Series PCB Layouts KPT-1104A Operating force: 160 ±30g Travel: 0.3 ± 0.15mm KPT-1104B o 2.0mm KPT-1104T 9.0 For information on right angle mounting and other variations - please ask.

9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview

9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded

More information

IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary

IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS

More information

ELECTRICAL SPECIFICATIONS

ELECTRICAL SPECIFICATIONS Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for

More information

CIT SWITCHTM ANT SPECIFICATIONS

CIT SWITCHTM ANT SPECIFICATIONS Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability

More information

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS SW-IPMOM-1709 DISTINCTIVE FEATURES Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 and IP69K ENVIRONMENTAL SPECIFICATIONS

More information

18000 series Snap-action momentary pushbutton switches

18000 series Snap-action momentary pushbutton switches Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for

More information

Common features. Installation options. Aesthetic options

Common features. Installation options. Aesthetic options New! LPI series Distinctive features and applications UG1006-A Common features Large ergonomic actuator (Ø 35 mm) Tactile feedback Low behind-panel depth (21 mm max.) Stylish design Long life This series

More information

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871 Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability

More information

Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.

Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS. Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact

More information

Selection guide - Section B1 «I» range

Selection guide - Section B1 «I» range Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1

More information

KSC Series Sealed Tact Switch for SMT

KSC Series Sealed Tact Switch for SMT KSC Series Features/Benefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator

More information

ELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67

ELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67 PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices

More information

K12 High Performance Key Switches

K12 High Performance Key Switches High Performance Features/Benefits Typical Applications Excellent tactile feel Automotive Wide choice of LE colors, Off-road transportation travel and actuator forces Industrial electronics High reliability

More information

SERIES. LED-Lit Push-Button Switches and Indicators. switches and indicators. SERIES 2 PRODUCT LINE-UP

SERIES. LED-Lit Push-Button Switches and Indicators. switches and indicators. SERIES 2 PRODUCT LINE-UP LED-Lit Push-Button Switches and Indicators SERIES 2 LED-lit (DC and 24Vac) switches and indicators. You can build the product best suited to your specifications by combining standard parts Selection of

More information

IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting

IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons

More information

IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary

IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families

More information

Sealed pushbutton switches - bushing Ø 16 mm - momentary

Sealed pushbutton switches - bushing Ø 16 mm - momentary Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families

More information

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS Distinctive features and specifications A01_AX1607US Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC PANEL CUT OUT ELECTRICAL

More information

APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator

APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features Large

More information

Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.

Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models. Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold

More information

K12 High Performance Key Switches

K12 High Performance Key Switches Features/Benefits Excellent tactile feel Wide choice of LE colors, travel and actuator forces High reliability / long life Sealed version available esigned for low-level switching ouble stroke version

More information

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS Distinctive features and specifications Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC A01_AX1607USR1 ELECTRICAL SPECIFICATIONS

More information

IR series. Sealed pushbutton switches bushing Ø 16 mm momentary standard version DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

IR series. Sealed pushbutton switches bushing Ø 16 mm momentary standard version DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS SW-IRMOM-1801 DISTINCTIVE FEATURES Screw version up to A Tactile feedback Sealed to IP6 Illuminated or non-illuminated Flat round actuator for optional marking ENVIRONMENTAL SPECIFICATIONS Front panel

More information

Attractive rugged rocker switch

Attractive rugged rocker switch istinctive features Attractive rugged rocker switch UG0AR Removable actuator Easy to stock Easy to customize Uptodate rocker design Smooth curves Wide choice of colours and symbols Laser etched symbols

More information

K12 High Performance Key Switches

K12 High Performance Key Switches High Performance Features/Benefits Typical Applications Excellent tactile feel Automotive Wide choice of LE colors, Off-road transportation travel and actuator forces Industrial electronics High reliability

More information

Switches. Introduction

Switches. Introduction Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile

More information

13000 series Professional quick-break momentary pushbutton switches

13000 series Professional quick-break momentary pushbutton switches Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -

More information

Series. Robust and attractive.

Series. Robust and attractive. Series 82 Robust and attractive. www.eao.com Series 82 Robust and attractive. With Series 82, EAO offers the optimal pushbutton for vandal-resistant, stylish HMI controls used in harsh industrial environments,

More information

Switches. Introduction

Switches. Introduction Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile

More information

LUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, Click quick-assembly feature 1-29 LUMOTAST 25 selector switch, ring nut fixing 1-29

LUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, Click quick-assembly feature 1-29 LUMOTAST 25 selector switch, ring nut fixing 1-29 General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp socket

More information

7000 SERIES ROCKER AND PADDLE SWITCHES Overview

7000 SERIES ROCKER AND PADDLE SWITCHES Overview Overview 7 SERIES Number of poles Terminals 3 Single pole 4 Double pole onsult factory for three and four pole models. Blank W WW Y } Y4 } Y6 } Y7 } Z Solder lugs or straight P depending on model Right

More information

SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES

SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES TO 1 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants ON REQUEST Other

More information

FP series Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching

FP series Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching Fully illuminated pushbutton switches bushing Ø 24 mm momentary or latching Distinctive features and specifications Threaded bushing UG1410AR2 Full actuator or symbol illumination Large but lightweight

More information

Functions The Series 19 incorporates the following functions: Indicator Pushbutton Illuminated pushbutton

Functions The Series 19 incorporates the following functions: Indicator Pushbutton Illuminated pushbutton Edition 11/2013 HMI-Components 19 Series Characteristics The compact 8 mm Series 19 is especially suited for: Raised design PCB (with adaptor) The low level switching element is laid out for low current

More information

FP series Fully illuminated pushbutton switches - bushing Ø 30 mm - momentary or latching

FP series Fully illuminated pushbutton switches - bushing Ø 30 mm - momentary or latching Fully illuminated pushbutton switches bushing Ø 30 mm momentary or latching Distinctive features and specifications Full actuator or symbol illumination UG1410AR3 Snapin and threaded bushing models Large

More information

Miniature Switches & Pilot Devices

Miniature Switches & Pilot Devices A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and

More information

3C/3E. Dimensions (Through-hole) Dimensions (SMD) Dimensions (Through-hole) Dimensions (SMD) ø 6.5 H= ±

3C/3E. Dimensions (Through-hole) Dimensions (SMD) Dimensions (Through-hole) Dimensions (SMD) ø 6.5 H= ± - 3C/3E Technical Data: - through-hole or SMD - 50mA/2VDC - single pole/momentary - 10.000.000 operations life time - IP67 sealing - temperature range: low temp: -0/+115ºC high temp: -0/+160ºC STANDARD

More information

Various rocker colours. Illuminated or non-illuminated ELECTRICAL SPECIFICATIONS

Various rocker colours. Illuminated or non-illuminated ELECTRICAL SPECIFICATIONS 00 series istinctive features and specifications Three rocker shapes : plain, Vshaped or concave Various rocker colours Frame with protection guard on 00LP models Illuminated or nonilluminated UL, CSA,

More information

Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range

Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range I range Sealed pushbutton switches Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range I range Sealed pushbutton switches

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Wide selection of illumination effects is achieved with single and bicolor, - or -element LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white,

More information

General_technical_data Series

General_technical_data Series Indicator actuator 2 500 Hz: 5 g Pushbutton actuator Lens flat/level with front bezel: - Momentary max. 3 600/h - Maintain max. 1 800/h Lens flat/raised above front ring: - Momentary max. 3 600/h - Maintain

More information

IP series Latching action pushbutton switches for harsh environments

IP series Latching action pushbutton switches for harsh environments Latching action pushbutton switches for harsh environments Distinctive features and specifications Latching action Actuator remains in the low position when ON. Illuminated and non-illuminated Compact

More information

TABLE OF CONTENTS. Push Button and Rocker Switches Pag. 4. Signal Lights and Lenses Pag. 14. Pressure Switches Pag. 24

TABLE OF CONTENTS. Push Button and Rocker Switches Pag. 4. Signal Lights and Lenses Pag. 14. Pressure Switches Pag. 24 1 TABLE OF CONTENTS Push Button and Rocker Switches Pag. 4 Signal Lights and Lenses Pag. 14 Pressure Switches Pag. 24 2 Push button and Rocker Switches 3 Switches Push button SERIES L4 L4 Bowl L4 Rubber

More information

Switches- and Indicators

Switches- and Indicators Switches- and Indicators Contents Description... 3 Product Assembly... 4 Mounting instruction... 6 Devices raised mounting... 7 Devices flush mounting... 17 Accessories... 22 Technical Data... 25 Typical

More information

APEM. LPI series. Tactile pushbutton switches with large actuator. Ø 35 mm actuator

APEM. LPI series. Tactile pushbutton switches with large actuator. Ø 35 mm actuator APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features

More information

Thermal Overcurrent Circuit Breaker 3120-F...

Thermal Overcurrent Circuit Breaker 3120-F... Thermal Overcurrent Circuit Breaker 20-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 6094 with trip free mechanism) offering the choice of

More information

IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary

IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications UG1410A Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high

More information

8000 series Momentary or alternate action pushbutton switches

8000 series Momentary or alternate action pushbutton switches Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A

More information

AV series Anti-vandal and security pushbutton switches

AV series Anti-vandal and security pushbutton switches Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism

More information

KSB & KSF Series Low-profile Tact Switch

KSB & KSF Series Low-profile Tact Switch KS & KSF Series Low-profile Tact Switch Features/enefits Low profile Protected against flux KS without top sealing KSF with top sealing RoHS compliant and compatible Typical Applications Low profile keyboards

More information

Thermal Overcurrent Circuit Breaker 3120-F...

Thermal Overcurrent Circuit Breaker 3120-F... Thermal Overcurrent Circuit Breaker 20-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (Stype TO CBE to EN 6094 with trip free mechanism) offering the choice of

More information

5000 SERIES TOGGLE SWITCHES Distinctive features B

5000 SERIES TOGGLE SWITCHES Distinctive features B 5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit

More information

S and SF series Washable miniature toggle switches

S and SF series Washable miniature toggle switches S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible

More information

8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS

8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30

More information

Thermal Overcurrent Circuit Breaker 3120-F...

Thermal Overcurrent Circuit Breaker 3120-F... Thermal Overcurrent Circuit Breaker 20-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (Stype TO CBE to EN 6094 with trip free mechanism) offering the choice of

More information

IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Overview IHS SERIES Actuator shapes Electrical function Operating force Termi

IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Overview IHS SERIES Actuator shapes Electrical function Operating force Termi IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high actuator

More information

Kiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red.

Kiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red. Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 8VDC Mechanical Life: 200,000 Cycles Electrical Life: 50,000 Cycles Contact Resistance:

More information

Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching

Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching istinctive features and specifications Full actuator or symbol illumination UG1410R1 Suited for integrated designs Large but lightweight Sealed to IP69K Pad printed or laser etched symbols Pad printing

More information

Q19 series. Ø19 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING

Q19 series. Ø19 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING IND-Q19-17-07 LED INDICATORS DISTINCTIVE FEATURES 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs Prominent and flush bezel styles (2.8 x 0.8) solder lug/faston terminals, pins

More information

Enclosures and assembled

Enclosures and assembled Enclosures and assembled stations Enclosures and assembled Stations Large plastic enclosure (Modular & Compact) This enclosure can fit both Modular and Compact operators with the unique possibility to

More information

Switches- and Indicators

Switches- and Indicators Switches- and Indicators Contents Description... 3 Product Assembly... 4 Mounting instruction... 6 Devices raised mounting... 7 Devices flush mounting... 9 Accessories... 11 Technical Data... 25 Drawings...

More information

SWITCHES. Other switch types include conventional, push-button and toggle switches.

SWITCHES. Other switch types include conventional, push-button and toggle switches. Switches Manufactured from Stainless Steel, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile

More information

M8 Series. Key features: BUCCANEER

M8 Series. Key features: BUCCANEER Bulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory automation

More information

Power rocker switches

Power rocker switches Distinctive features and specifications Protected rocker Illuminated or nonilluminated VDE (EN 08) approved Sealed to IP ELETRIL SPEIFITIONS urrrent/voltage rating : functions (ONOFF) and (ONON) : VD,

More information

AV SERIES PUSHBUTTON SWITCHES Distinctive features

AV SERIES PUSHBUTTON SWITCHES Distinctive features PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism protected against crushing

More information

SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES

SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES TO 0 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle mechanical life endurance up to 1 million switching cycles Wide variety Variants with IP 67 or dust protection insert Two

More information

RTBH Series 1-2 Pole Coded Rotary Switches

RTBH Series 1-2 Pole Coded Rotary Switches RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications

More information

General_technical_data Series

General_technical_data Series Emergency-stop Switching system The double-break switching system can be supplied for the following switching functions: 1 Normally closed, 2 Normally closed, 1 Normally closed + 1 Normally open. The Normally

More information

2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview

2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview Overview 6 SERIES Electrical functions Frame type 1 ON - OFF 4 ON ON ON MOM - ON 6 ON - ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON double pole only LH LP Plain With protection guard Number of poles Special

More information

General Specifications

General Specifications Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum

More information

General Specifications

General Specifications Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable

More information

General Specifications

General Specifications Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable

More information

RTA Series 1 4 Poles Coded Rotary Switches

RTA Series 1 4 Poles Coded Rotary Switches 1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications

More information

LUMOTAST FK. General data. Content

LUMOTAST FK. General data. Content General data TAST illuminated pushbutton range Illuminable pushbuttons and signal lamps with lamp socket T /T / 4. Please order lamps / LEDs separately. Mounting hole diameter 6.2 mm 42 V/00 ma max. Water-jet

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,

More information

ø8 A8 Series Miniature Control Units

ø8 A8 Series Miniature Control Units A8 ø8 A8 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals

More information

B3F. Miniature, Space-saving Switch

B3F. Miniature, Space-saving Switch B3F Miniature, Space-saving Switch Long mechanical / electrical service life Ideal for applications such as audio, office and communications equipment, TVs, etc Taped radial, vertical, high-force, and

More information

Mechanical Key Switch

Mechanical Key Switch Mechanical Key Switch B3F A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical and High-force. Excellent tactile feel combined with high life expectancy. Available in stick packaging for automatic mounting

More information

Pushbutton and key switches

Pushbutton and key switches Pushbutton and key switches Section ZP Tiny, metal bushing, momentary 3 SMT TP Tiny, SMT, washable, momentary 5 TP Tiny, washable, momentary 7 9100-9200-9500 Subminiature, momentary 13 IF Miniature, sealed,

More information

Power rocker switches with protection guard

Power rocker switches with protection guard Distinctive features and specifications Protected against accidental actuation SWKH709 Wide choice of colors Laser etched or pad printed symbols Illuminated or nonilluminated Sealed to IP9K ELECTRICAL

More information

Miniature Stainless Steel Vandal Resistant

Miniature Stainless Steel Vandal Resistant Miniature Vandal Resistant Prominent Button / Flush Profile Prominent and Flush Profile 2A, 36 dc (Front of Panel Only) Specification /3 /1 Operating Temp Range: 0.6Nm 0.6Nm PA Copper, Gold Plated PA Copper,

More information

APEM. K range. Power rocker switches and indicators. Unique rocker design

APEM. K range. Power rocker switches and indicators. Unique rocker design APEM K range Power rocker switches and indicators Wide range Laser etched symbols Illuminated or nonilluminated Optionally sealed to IP8 Unique rocker design K range Power rocker switches and indicators

More information

HMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch

HMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch Edition 10/2016 HMI Components Series Characteristics The compact Series is especially suited for: Flush design The large rectangular design (24x36mm) features a large illuminated area. Functions The Series

More information

Q16 series. Ø16 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING

Q16 series. Ø16 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING IND-Q16-17-07 LED INDICATORS DISTINCTIVE FEATURES Secret until lit polycarbonate decals or custom engraving 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs (2.8 x 0.8) solder lug/faston

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor

More information

Thermal Overcurrent Circuit Breaker 3120-F...

Thermal Overcurrent Circuit Breaker 3120-F... Thermal Overcurrent Circuit Breaker 20-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (Stype TO CBE to EN 6094 with trip free mechanism) offering the choice of

More information

CONTENTS PRODUCT DESCRIPTION Functional Description: NO Switch Functional Description: Illumination...

CONTENTS PRODUCT DESCRIPTION Functional Description: NO Switch Functional Description: Illumination... Product Manual PSE NO Switch CONTENTS CONTENTS... 1 1 PRODUCT DESCRIPTION... 3 1.1 Functional Description: NO Switch... 3 1.2 Functional Description: Illumination... 4 2 TECHNICAL DATA AND DIMENSIONAL

More information

SERIES 16, 18, 26 & 19N MICROSWITCH RANGES

SERIES 16, 18, 26 & 19N MICROSWITCH RANGES SERIES 16, 18, 26 & 19N MICROSWITCH RANGES SERIES 16, 26 & 18 - MICROSWITCH SERIES 16 & 26 FEATURES Form Z contacts to cover all switching requirements Snap action for positive switching Solder terminals

More information

A02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm)

A02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866 (22mm) or 1.161 x.846 (29.5mm x 21.5mm) PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm) E A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + one or two

More information

EP series cable clamp capable of supporting cables from 9mm (0.35 ) to 16mm (0.63 ) in diameter. Quick release, vibration resistant latch lock.

EP series cable clamp capable of supporting cables from 9mm (0.35 ) to 16mm (0.63 ) in diameter. Quick release, vibration resistant latch lock. EP / AP / SP SERIES HIGH POWER / LOUDSPEAKER CONNECTORS SP/EP/AP SERIES HIGH POWER / LOUDSPEAKER CONNECTORS The SP Series are available in 2 or 4 pole chassis mount connectors. The durable thermoplastic

More information

A1-A01-A02-A03 series

A1-A01-A02-A03 series A1-A01-A02-A03 series Industrial controls Distinctive features The A01 and A02 series offer ranges of : - pushbutton switches, illuminated or not - indicators - 2 or 3 position keylock switches - 2 or

More information

Switches. Introduction

Switches. Introduction Introduction Switches Manufactured from Stainless Steel, ulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially

More information

SERIES SINGLE AND DOUBLE-POLE PUSHBUTTON SWITCHES

SERIES SINGLE AND DOUBLE-POLE PUSHBUTTON SWITCHES PRODUCT FEATURES Illuminated and non-illuminated pushbutton switch Proven jump contact switching system (double interrupting) Opening and closing speed independent of the actuating speed Product-dependent

More information

Emergency stops Award winning design

Emergency stops Award winning design Emergency stops Award winning design Emergency stops Choosing the right emergency stop device is vital in order to increase the safety for your personnel and equipment. ABB has a very wide range of emergency

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue as well as bright

More information

SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive)

SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive) SWITCH SELECTION GUIDE Trim Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive) MT T1 Quiet Operation, Momentary 10mA @ 5VDC IP64, IP68S 11/16 dia. Threaded SPST (x2)

More information

Plastic enclosures compact Of polycarbonate. Degree of protection: IP 66, 67, 69K UL type1, 3R, 4, 4X, 12, 13

Plastic enclosures compact Of polycarbonate. Degree of protection: IP 66, 67, 69K UL type1, 3R, 4, 4X, 12, 13 Pilot devices, 22 mm Assembled stations and enclosures Assembled stations There are assembled stations of two types: In plastic enclosures and in metallic enclosures Both types of enclosures are available

More information

Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)

Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC) SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.

More information

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm latching DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm latching DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS SW-IPLATCH-802 DISTINCTIVE FEATURES Latching action Illuminated or non-illuminated Compact Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP67

More information

Q SERIES Ø19mm (.748") Panel Mount LED Indicators Distinctive features and specification

Q SERIES Ø19mm (.748) Panel Mount LED Indicators Distinctive features and specification Distinctive features and specification Q19_VOY1603R1US Features 19mm panel mounting LED indicator 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs Plated brass bezel finished in bright

More information