GT5P Series ON Delay Timers

Transcription

1 T5P Series T5P Series ON Delay Key features of the T5P series include:, 5A contacts 8-pin, octal base 9 time ranges Repeat error ±0.2% maximum Control settings by hand or screwdriver Power ON and timing out LED indicators Uses the same sockets and hold down clips as IDEC s RR2P 8-pin relays UL Recognized File No. E55996 CSA Certified File No. LR66809 Specifications Rated Operating Voltage Voltage Tolerance Contact Rating Resistive load Inductive load Allowable Contact Power (resistive load) Contact Form Voltage Repeat Error Voltage Error Temperature Error Setting Error Reset Time Insulation Resistance Dielectric Strength 100 to 120V AC (50/60Hz) 200 to 240V AC (50/60Hz) 24V AC/DC 12V DC AC type: ±15% DC type: ±10% (ripple 10% maximum) 120V AC/24V DC, 5A 240V AC, A 240V AC, 0.8A 120V AC, 1.4A 24V DC, 1.7A 960VA AC 120W DC 250V AC, 150V DC ±0.2% ±10msec ±0.5% ±10msec ±% maximum (over 10 to 50 C, reference temperature 20 C) ±10% maximum When turning power off after time up: 0.1 sec maximum When turning power off before time up: 1 sec maximum 100MΩ minimum 2000V AC, 1 minute (except between contacts of the same pole) Vibration Resistance 100N (approximate 10) Shock Resistance Power Consumption Electrical Life Mechanical Life Operating Temperature Operating Humidity 1.Inductive load (reference), cosθ =. to.4 or L/R=15msec. 2.Minimum applicable load: 5VDC/10mA (reference). Operating extremes: 100N (approximate 10) Damage limits: 500N (approximate 50) 100V AC type: 1.5VA (at 50Hz) 200V AC type: 1.6VA (at 50Hz) 24V DC type: 0.9W 100,000 operations minimum (at rated load) 20,000,000 operations minimum 10 to +50 C 45 to 85% RH T5P Table of Contents Specifications -58 Part Numbering List -59 Timing Diagrams / Schematics -60 T5P Accessories -61 T5P Dimensions -62 Timing Diagrams Overview USA: (800) 262-IDEC or (408) , Canada: (888) 17-IDEC

2 T5P Series Part Numbering List Mode of Contact Output Rated Voltage Time Range Complete Part No. 1S S T5P-NSA100 6S 100 to 120V AC 0S T5P-NA100 T5P-N0SA100 T5P-NA100 M T5P-NMA100 T5P-NA100 T5P-NA100 1S T5P-N1SA200 S 6S T5P-N6SA to 240V AC 0S T5P-NA200 T5P-N0SA200 T5P-NA200 ON-Delay 24V DC/ 120V AC, 5A 240V AC, A M T5P-NMA200 T5P-NA200 T5P-NA200 1S T5P-N1SAD24 S 6S T5P-N6SAD24 T5P-NAD24 24V AC/DC 0S T5P-NAD24 M T5P-NAD24 T5P-NAD24 1S S 6S T5P-ND12 12V DC 0S T5P-N0SD12 T5P-ND12 M T5P-ND12 For sockets and accessories, see page USA: (800) 262-IDEC or (408) , Canada: (888) 17-IDEC -59

3 T5P Series Timing Diagram/Schematic/Electrical Life Curves Mode (-) POWER 7 (+) Do not apply voltage to terminals 1,, and 4. Item Terminal No. Power (Power) 2-7 Set Time ON-Delay Delayed Contact (NC) (NO) Indicator POWER OUT Electrical Life Curves Life (x 10,000 operations) V DC Resistance Load 120V AC Resistance Load 240V AC Resistance Load 24V DC Induction Load 120V AC Induction Load 240V AC Induction Load Load Current (A) USA: (800) 262-IDEC or (408) , Canada: (888) 17-IDEC

4 T5P Series Accessories Mounting Accessories Part Numbers: Mounting Accessories and Sockets Applicable Hold-Down Springs Style Appearance Use with Part No. Appearance Part No. 8-Pin Screw Terminal (dual tier) T5P SR2P-05 SFA-20 8-Pin Fingersafe Socket T5P SR2P-05C DIN Rail/ Surface Mounting Accessories 8-Pin Screw Terminal T5P SR2P-06 SFA-202 DIN Mounting Rail Length 1000mm BNDN1000 Mounting Accessories Part Numbers: Mounting Accessories and Sockets Applicable Hold-Down Springs 8-Pin Solder Terminal SR2P-51 SFA-402 Installation of Hold-Down Springs DIN Rail Mount Socket Panel Mount Socket Insert the springs into the outer slots with the projections facing inside. Insert the springs into the slots. Hold-down Spring SFA-402 Insert Socket SR2P-06 Hold-down Spring (sold separately) SFA-202 (use two springs) Socket SRP-05 Hold-down Spring (sold separately) SFA-20 (use two springs) 8-pin Socket SR2P USA: (800) 262-IDEC or (408) , Canada: (888) 17-IDEC -61

5 T5P Series Dimensions Dimensions: T5P Series " T5P Timer, 8-Pin with SR2P-05 (When using DIN Rail) When using BAA/BAP: 102 maximum 98 maximum DIN Rail (BAA/BAP/BADA) Hold-down spring T5P Timer, 8-Pin with SR2P-06 6 ø (When using DIN Rail) When using BAA/BAP: 95.5 maximum 91.5 maximum Hold-down Spring DIN Rail USA: (800) 262-IDEC or (408) , Canada: (888) 17-IDEC