Power Supplies. Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies

Transcription

1 Standard Series Standard Series Switching Part Numbers Part Number Item Watts Rated Voltage Rated Current -A V DC 1.A -A 7. V DC.6A -A24 24V DC.3A -B V DC 2.A Key features of the standard series include: Wide Power Range: 7.W-24W Universal Input: 7.W-W:8-264V AC/1-37V DC 1W:1-V AC/2-24V AC (Selectable) 24-37V DC W-24W:8-264V AC/1-37V AC Fused Input Overcurrent/Overvoltage Protection Power Factor Correction (W, W, 24W models) EN EN Voltage adjustment + 1% Spring-up Screw Terminal, IP2 (finger-safe) DIN rail or Panel Surface Mount Approvals: CE marked U 8 isted U, c-u TÜV approved EMC Directives: EN81-2 EN82-2 EN VD EN9:2 -B 1 V DC 1.2A -B24 24V DC.6A -C V DC 2.A 3 -C24 24V DC 1.3A -D24 24V DC 2.1A -Q24 24V DC 3.1A U 8 isted File # E Cert. No. B E V DC 4.2A -F24 24V DC A -G V DC 1A -8 USA: (8) 262-IDEC or (48) 747-, Canada: (888) 317-IDEC

2 Standard Series Specifications Specifications Part Numbers Input Output VDC output -A -B* VDC output -A -B -C 24VDC output -A24 -B24 -C24 -D24 -Q24 -E24 -F24 -G24 Output Capacity 7.W 1W 3W W W 1W W 24W Input Voltage (single-phase, 2-wire) Input Current (typical) 1 to 24VAC nominal (8 to 264V AC), /Hz (47 to 63Hz) 11 to 34VDC nominal (1 to 37VDC).17A at 1VAC.3A at 1VAC.68A at 1VAC 1.1A at 1VAC 1.1A 1 to VAC, /Hz 2 to 24VAC, /Hz (jumper selectable) 24 to 37VDC 2.A at 1VAC 1.A at 2VAC 1 to 24VAC, /Hz, 11 to 34VDC 1.8A 4A at 1VAC Internal Fuse Rating 2A 2A 3.1A 3.1A 3.1A 4A 4A 6.3A Inrush Current A maximum (at cold start at 2V AC) 7A maximum (at cold start at 23V AC) A maximum (at cold start at 2V AC) eakage Current (at no load).ma maximum (Hz, measured in conformance with U, CSA, VDE) Typical Efficiency 69% at V 69% at V 73% at V % at V % at V % at 24V 79% at 24V % at 24V 79% at 24V 83% at 24V DC 8% at 24V 83% at 24V DC Overvoltage Protection Outputs turns off at 1% (typical) Voltage and Current Ratings V, 1.A V,.6A 24V,.3A V, 2.A V, 1.2A 24V,.6A 7A maximum (at cold start at 23V AC) 83% at 24V V, 2.A 24V, 1.3A 24V, 2.1A 24V, 3.1A 24V, 4.2A 24V, A 24V, 1A Voltage Adjustments ±1% ( screw on top) Output Holding Time 2ms minimum (at full rated input and output) Rise Time 2ms maximum (at full rated input and output) 1ms max. ine Regulation.4% maximum oad Regulation 1.% maximum Fluctuation due to Ambient Temperature Change.% maximum Ripple Voltage 2% peak to peak maximum (including noise) Overload Protection % typical (Zener-limiting) % typical, auto reset Operation Indicator ED Parallel Operation Dielectric Strength Insulation Resistance Operating Temperature Storage Temperature Operating Humidity -A -B -C -D -Q -E -F -G No Yes No Yes Between input and output terminals: 3,V AC, 1 minute Between input terminals and housing: 2,V AC, 1 minute Between output terminal and housing: V AC, 1 minute Between input and output terminals/input terminals and housing: 1MΩ minimum (V DC megger) 1 to + C (14 to 14 F) (see derating curves) 3 to +8 C (-22 to 18 F) 2 to 9% relative humidity (no condensation) Vibration Resistance 4m/s 2, 1 to Hz, 2 hours on each of 3 axes 1 to Hz,.mm p-p, 2 hrs on each of 3 axes Shock Resistance 3m/s 2 (3G), 3 shocks in each of 6 directions Approvals Conforms to EMC Directives EN81-2 & EN82-2. VD Directive EN29 Certified to EN9. U8 listed. U, c-u, TUV approved. CE marked. EN Weight 1g 17g 3g 39g 8g g g 2g Termination Spring-up, fingersafe terminals with captive M3. screws IP protection IP2 (finger safe) Dimensions H x W x D (mm) x 4 x 7 x 4 x9 x 9 x 9 Dimensions H x W x D (inches) 2.9 x 1.77 x x 1.77 x x 3.4 x 3.74 x 9 x x 3.4 x 3.74 x 8 x 14 x 14 x 9 x 11 x14 x 2x x 3.3 x x.71 x 3.74" 4.72 x 4.3 x x 7.87 x.1 1. For dimensional drawings, see page For usage instructions, see page *.W for VDC model. USA: (8) 262-IDEC or (48) 747-, Canada: (888) 317-IDEC -9

3 Standard Series Temperature Derating Curves -A/B -C/D E -Q F/G A Mounting B Mounting Operating Temperature ( C) Mounting Style B Mounting Style A Mounting Style A (standard) Vertical Operating Temperature ( C) Mouting style A Mounting Style B (Facing upward) Vertical -1 USA: (8) 262-IDEC or (48) 747-, Canada: (888) 317-IDEC

4 Standard Series Accessories Part Numbers: Accessories Appearance Description Part Number DIN rail (1mm) BNDN1 DIN rail end clip BN Installation Instructions Time-Saving Spring-up Terminals The innovative terminals on the series use a special, spring-loaded screw. This makes installation as easy as pushing down and turning with a screwdriver. Installation time is cut in half since the screws do not need to be backed out to install wiring. The screws are held captive once installed and are 1% finger-safe. Screw terminals accept bare wire or ring or fork connectors. 1. Insert the wire connector into the slot on the side of the power supply. Overcurrent Protection Characteristics 2. Using a Phillips screwdriver, push down and turn the screw. -A/B -C/D/E 1 1 Output Voltage (%) Output Voltage (%) The wire is now connected, and the screw terminal is finger-safe! Front Panel (terminals) Terminal Name Description V. ADJ +V, V, N NC Voltage adjustment Operation indicator DC output terminals Frame ground Input terminals No connection Adjusts within ±1%; turn clockwise to increase output voltage Green ED is lit when output voltage is on +V: Positive output terminal V: Negative output terminal Ground this terminal to reduce high-frequency currents caused by switching Accept a wide range of voltages and frequencies (no polarity at DC input) Do not insert wires here, as this may damage the power supply Parallel Operation 1 +V (24V) -V (V) TERMINAS 1 EECTRIC OAD Parallel operation only recommended for -Q24, -F24 and -G24. USA: (8) 262-IDEC or (48) 747-, Canada: (888) 317-IDEC -11

5 Standard Series Dimensions -A (7.W). mm 4. mm 7. mm -B (1W). mm 4. mm 9. mm R2.2 6-ø R2.2 6-ø C (3W) -D (W) 1-ø ø mm 9. mm 9. mm.mm 9.mm 9.mm -Q (W) -E (1W) mm 8. mm 14. mm ø6.. mm 14. mm 9. mm 8 -F (W) G (24W) V mm 11. mm 14. mm 11.mm 2.mm 14.mm USA: (8) 262-IDEC or (48) 747-, Canada: (888) 317-IDEC