About KVAL Machinery

Transcription

1

2 Making Quality Door and Jamb Machinery Since 1947 INNOVATION QUALITY HONESTY Order Today! Call About KVAL Machinery KVAL was started in the mid 1940 s by AA Kvalheim A Norwegian trained furniture maker, who turned to cabinetmaking and carpentry, and eventually machinery manufacturing after immigrating to the United States One product produced in the mid 40 s was a panel saw which helped expand the fledgling flush door industry that was developing around the Walled Lake, Michigan area Early door sizing systems were supplied to companies like Young Door, Walled Lake, Arrow Door, and out on the west coast to Cal Wood Door In the mid 1950 s, sons Andy and Irv Kvalheim joined in the business As the company grew, so did the line of products Door pre-hanging equipment was designed for distributors and high production equipment was designed for manufacturers producing pre-fit units During the growth years of the 60 s, the company continued as an innovator in the industry with automatic machines for jamb processing, casing trimmers and updated door sizers As the 70 s began, customers began demanding even more automation to cut labor costs and improve product quality Kval responded with bifold door assembly and pre-hanging machines featuring fully automatic screw driving systems Today, Jerry, David, and Mark Kvalheim the three grandsons of AA Kvalheim have joined the firm The company family has also grown to include George Kameoka as head engineer, and Mark Smith as one of the managing partners KVAL products have continued to evolve and are now faster than ever, but are easier to set up, and produce higher quality doors than ever before Recent technical innovations include CNC controls and the complete replacement of air logic control systems with solid state programmable controllers Fully automatic positioning and sequencing for door and jamb equipment Digital readouts with touchscreen controls to guarantee accurate setup and operation When looking for quality door, jamb, casing, and related machines, look to the leader in the industry for over six decades! Look to KVAL!!! KVAL Inc All rights reserved This document may not be copied, photocopied, reproduced, transmitted, or translated in any form or for any purpose without the express written consent of KVAL Inc KVAL Inc reserved the rights, without notice, to change design and construction of any products Price are subject to change without notice Errors in description, photography, or typographical errors are subject to correction Printed in the United States of America Published on 10/1/2014

3 To see our full line of products, go to kvalinccom and type in Commander-DI Find Commander-DI The Commander-DI will accommodate either flush or raised molding doors with protrusions up to 7/8" high on one or both sides These raised moldings must be a minimum of 4-1/4" from the lock and hinge sides of the door The Commander-DI will also machine jambs that vary in thickness from 11/16" to 1-1/16" in thickness, at the same time as the door, or it can be used to machine jambs only The jamb support brackets set-ups are Non-CNC controlled, and must be moved by the operator These set ups however, can be done quickly and easily by the machine operator Jamb width can vary from 3-1/2" to 7-1/4" when the jambs are attached to the door with hinges Wider jambs can be machined along with the door and attached after the door has been fed out of the Commander-DI Hinge sizes, 3-1/2" x 3-1/2", and 4" x 4", can be attached while the door and jamb are clamped in the machine The door and jamb may also be machined for 4-1/2" x 4-1/2" hinges; however, the hinges can be attached only to the door or jamb while they are clamped in the machine NOTE: If pilot hole drilling for the hinge screws is required for this machining set up, specify drill gearbox option A-3 If machining for 4-1/2" x 4-1/2" and attaching the hinge to the door and jamb while clamped in the machine is required, option HA is required to revise the jamb supports allow for the increased space between the door and jamb The Commander-DI is also equipped with a computer controlled pre-drill system, which uses manually installed drill gearboxes complete with air motors and chucks, to drill pilot holes for the hinge screws Each drill gearbox is also equipped with locating brackets and mounting base to allow for quick change from one drilling pattern to another The pilot hole drill gearboxes are sold separately, and are made to match the screw hole pattern for each type of hinge Pilot hole drill gearboxes for 3-1/2" x 3-1/2", 4" x 4", 4-1/2" x 4-1/2" full or half hinges are listed in the options Machining Parameters: 1-3/8 2-1/4 door thickness door width door length including raised molding doors with moldings up to 7/8" high, and located not less than 4-1/4 from the door edge Jamb width without adjustment from 3-1/2 to 7-1/4 for pre-hanging Hinge knuckle height to 5 (max 4-1/2 x 4-1/2 for pre-hanging) 1/4" OR 5/8 hinge radius No Hinge, 2 hinge, 3 hinge, 4 hinge machining sequence No Lock, 1 lock, or automatic 2 lock machining Track Your Order Online at STOREKVALINCCOM 3

4 Making Quality Door and Jamb Machinery Since 1947 INNOVATION QUALITY HONESTY Order Today! Call Tooling Chuck, Replacement Chuck For the Perske Motor KNS , Self clamping chuck holder KVAL P/N: PERSP Strain Relief Connector, Straight, 2522, 1/2 Hub Cable Range in inches KVAL P/N: 2522 Wrench For Perske Motor KNS , Manual Quick Change KVAL P/N: PERSP Strain Relief Connector, M20 x 15 Cable Range in inches KVAL P/N: 2532M20B Router Bit, Spin On, 1-1/4" Dia, 1/4-28 Thread KVAL P/N: RBSO Rear Fan Cover with Electrical Fitting Hole, Perske 1 & 2 HP Motor KVAL P/N: 804C Sipp Cutter Blade (#13) KVAL P/N: SIP013 Arbor 1/2 Dia Shank 1/4-28 Thread 2-1/2 OAL (BOS82818) KVAL P/N: KVARBOR18A Sipp Cutter Blade (#13), Buy 4 Get 1 FREE KVAL P/N: SIP013-PROMO Arbor 1/2 Dia Shank 1/4-28 Thread 2-3/8 OAL Drill Bit, High Speed Steel, 1/8 Stub Length KVAL P/N: KVARBOR18A1 KVAL P/N: SLD1250 Collet, 1/2", 1 and 2 HP, Perske Motors and 15 HP Colombo motor KVAL P/N: PERER20-1/2 Twist Drill, 1/4" Dia X 70mm Long, 10 X 23 Shank Brad Point, Right Hand Twist KVAL P/N: TD0470-BP Cover Nut, ER20 (1/2) Collet Used on 1 HP and 2 HP Perske Motor KVAL P/N: PERER20C Twist Drill, 4mm Dia, 70mm Long, 10 X 23 Shank Brad Point, Right Hand Twist KVAL P/N: TD04M70-BP Collet Wrench, ER20 Series, 1/2" Collet, 1 and 2 HP Perske (Fingers) KVAL P/N: PERER20W Shaft Wrench,22MM, 1 and 2 HP Perske Motor and 15 hp Columbo motor With 1/2 Collet Capacity KVAL P/N: WRENCH22MM 4 KVALINCCOM More Products Online

5 To see our full line of products, go to kvalinccom and type in Frame & Feed Find Frame & Feed Pulley, Single Sheave Belt Pulley Assembly KVAL P/N: 604A Pulley, BK55H Pulley Single Sheave 5-OD 1997 Bore with Oilite (Modified) (Auto-Feed), Hex Pulley KVAL P/N: BROBK55HY Photo Eye Blowoff Kit - Includes (1) HUMBF1, (1) HUMSEF, (1) HUMBF, (2) NUTCJ375, and (1) 236C (1-1/2 LG Thread) KVAL P/N: 90F3-003 Taper Bushing, Split, G X 14MM KVAL P/N: BROG14MM Motor, Inverter Duty, 3/4 HP, RPM, 56C, 3 Phase 460/230V KVAL P/N: BALIDNM3542 Taper Bushing, Split, 4016 X 1 Bore KVAL P/N: BROH16 Motor 3/4 HP 1140 RPM TEFC 56C /440 Volt KVAL P/N: BALVM3543 Shuttle Valve, 1/4", SV20B, NPT KVAL P/N: DELSV20B Gearbox, 90 Degree 1:1 Ratio, 1" Bore RH Float-A-Shaft KVAL P/N: BRA Hairline Pointer, Plastic KVAL P/N: HLPOINTR1 Gearbelt Pulley, 14 Groove, 2174 OD, 14HG100, Use G Bushing KVAL P/N: BRO14HG10 FMCBES Model 625 Clutch-Brake Com KVAL P/N: HOR Sprocket, 4014 X 1 Bore KVAL P/N: BRO Bearing, FB 160 X 1", 2 Hole Mount, Setscrew Locking Relube KVAL P/N: HUBFB1603 Pulley, Gearbelt, BK55H, Single Sheave 5" OD Tapered Bore, Modified KVAL P/N: BROBK55HX Bearing, FB 260 X 1", 2 Hole Mount, Setscrew Locking Relube KVAL P/N: HUBFB2603 Track Your Order Online at STOREKVALINCCOM 5

6 Making Quality Door and Jamb Machinery Since 1947 INNOVATION QUALITY HONESTY Order Today! Call Frame & Feed Bearing, Pillow Block, PB 250 X 1, Setscrew Locking Relube KVAL P/N: HUBPB2503 Servo Motor, 3", 2400 rpm, 275 in/lbs, 37 amps or MPM892BSG7G1N KVAL P/N: MPM892BTG7G1N Bearing, Pillow Block, TPB 250 X 1, Tapped Base Setscrew Locking Relube KVAL P/N: HUBTPB253 Radial Ball Bearing,77R12,3/4" Bore KVAL P/N: NAC77R12 Air Piloted Valve, Humphrey 250A , Normally Closed 1/4" (64mm), 3-Way Pilot KVAL P/N: HUM250A01 Rod End Male, TRE-6, 3/8 Bore, 3/8-24 Male Thread Shank End KVAL P/N: RODEND06M Valve, Humphrey, Air Piloted 501A , 1/2 Ports, 275 CFM AT 125 PSI 2&3WAY,N/0&C KVAL P/N: HUM501A Rod End Male, 3/8-24 NF Left Hand KVAL P/N: RODENDCB6 Bearing, 1-1/2" Open Super Linear Pillow Block KVAL P/N: INASPB240 Ruler,1-1/2" x 38", Plastic Adhesive backed reading Left to Right 16-52,White/Green/Red Graphics, 1" blank at Ends, Top Coated KVAL P/N: RULE1652 Wheel, 3" Dia X 1-1/4" Wide 3/8" ID Wheel With Simi Precision Roller Bearing KVAL P/N: INDXS Seal 1/2-ID 875 OD Single Lip KVAL P/N: SEAL08 Handle, Kip 3/8-16 Thread, 156 Stud, Adjustable KVAL P/N: KIP38254 Seal 1-ID 1567-OD Single Lip KVAL P/N: SEAL16 LoveJoy, L095 Coupling Body, 1" Bore, Part of 3 Piece Flexible Coupling KVAL P/N: LOVL09516 Regulator, 1/4" Mini With Check Valve (1/8" Body with 1/4" Ports) KVAL P/N: SMC20001R 6 KVALINCCOM More Products Online

7 To see our full line of products, go to kvalinccom and type in Frame & Feed Find Frame & Feed Regulator, Bracket, 1/4" Mini KVAL P/N: SMC20001Y Valve,VQC or VQC SMC Valve Without Base, Single Acting 24VDC KVAL P/N: SMCVQC Filter, 1/2" With Auto Drain, SMC, AF40- N04D-Z KVAL P/N: SMC40004F Valve,VQC AND VQ4000 SMC Valve with 1/4 National Pipe Thread Base Single Acting KVAL P/N: SMCVQC4100-5A Lubricator 1/2" NPT, SMC, AL40-N04-Z KVAL P/N: SMC40004L Hytrel Spider or Connector for the 090 and 095 Series Flexible Couplings KVAL P/N: SPIDER005-H Regulator 1/2" NPT, SMC, AR40K-N04-Z KVAL P/N: SMC40004R Generation 2, 25mm STAR Ball Rail Bearing STA With (2) Seals Installed KVAL P/N: STA S Regulator, SMC, 1/2" NPT Port With Backflow Mechanism With Gauge KVAL P/N: SMC40004R-K Tape 12' Stick-Down 1/2 Wide Reads L-R KVAL P/N: TAPE12RI Pressure Gauge, SMC, K40, 1/8 NPT Thread, 160 PSI KVAL P/N: SMCK10 Timken Bearing Race for the Ball Screw Housing (20mm) KVAL P/N: TIMLM11710 Pressure Gauge, SMC, K50, 1/4 NT Thread, 160 PSI KVAL P/N: SMCK12 Timken Bearing for Ball Screw Housing (20mm) 845 KVAL P/N: TIMLM11749 Track Your Order Online at STOREKVALINCCOM 7

8 Making Quality Door and Jamb Machinery Since 1947 INNOVATION QUALITY HONESTY Order Today! Call Front Section Lower Head Assy Spring 1-25/64-OD 7" LG 7/8-ID 207 W C/G Bpr Spg 110Saw K-17 SPG0702 KVAL P/N: A Belt, Gearbelt, 1" Wide, 40 Teeth, 150L100 KVAL P/N: BLT150L10 Micro Mini Pre-Wired Rotary Enclosed Switch 914CE16-9 or OMRON D4C-1620 KVAL P/N: 914CE169 Gearbelt Pulley, 14 Groove, 2174 OD, 14HG100, Use G Bushing KVAL P/N: BRO14HG10 Cylinder, Advance, Hardware, 240 & 300 Series, Clevis KVAL P/N: ADV240M01 Gearbelt Pulley, 18 Groove, 2119 OD, 18LG100, Use G Bushing KVAL P/N: BRO18LG10 Cylinder, Advance, Hardware, 300 Series, Clevis Single Mount KVAL P/N: ADV300M03 Taper Bushing, Split, G X 14MM KVAL P/N: BROG14MM Cylinder, Advance, 490 X 1" KVAL P/N: ADV490A17 Flange Ball Screw Nut, 40mm Dia, Adjustable, 20mm Lead KVAL P/N: BSNUT40B Cylinder, Bimba 0905D 1/2 Double Acting Front Nose Mount 1-1/16 Bore KVAL P/N: BIM090UD Sleeve Valve, 3/8", 3-Way KVAL P/N: FOS3W375 Cylinder, Bimba 121D 1" Double Acting Front Nose Mount 1-1/4 Bore KVAL P/N: BIM121D Limit Switch, Standard, Micro Switch 1LS312L KVAL P/N: LIMITSWAA Cylinder, Bimba, Hardware, 120,170 Foot Bracket 75 Bore 250 Long Slotted Base KVAL P/N: BIMD241 Limit Switch Arm Outside Offset 1-1/2 Radius with 3/4 Wheel 1/4 Wide KVAL P/N: LSZ55D 8 KVALINCCOM More Products Online

9 To see our full line of products, go to kvalinccom and type in Lower Head Assy Find Front Section Lower Head Assy Servo Motor AC, 45 in-lbs Continuous Torque 3000 RPM Continuous 4200 RPM Max) KVAL P/N: MPM1141ATG7G1N Speed Controller, One-touch Fitting, 1/4 NPT - 3/8" OD, Elbow & Universal Types, NAS2201F-N02-11S KVAL P/N: SMCAS2201F4 Servo Motor, 3", 2400 rpm, 275 in/lbs, 37 amps or MPM892BSG7G1N KVAL P/N: MPM892BTG7G1N Valve,VQC or VQC SMC Valve Without Base, Single Acting 24VDC KVAL P/N: SMCVQC Air, Muffler, 1/4 Thread, Bronze Screen KVAL P/N: MUFFLER04 Valve, VQC SMC Valve Without Base, Double Acting, 24VDC KVAL P/N: SMCVQC Ball Bearing, 5201ZZ, NS Valve, Blanking Kit, SMC KVAL P/N: NAC5201ZZ KVAL P/N: SMCVVQ A-1 Seal 1/2-ID 875 OD Single Lip KVAL P/N: SEAL08 Manifold, Station Tie Rod, VQC4000 Series SMC Valve KVAL P/N: SMCVVQ Seal 1-ID 1567-OD Single Lip KVAL P/N: SEAL16 Generation 2, 25mm STAR Ball Rail Bearing STA With (2) Seals Installed KVAL P/N: STA S Turck BI2-G12K-AN6X-7M Inductive Proximity Switch 12MM Dia 24 VDC (30MM Length) KVAL P/N: SHORT12DC Tapered Roller Bearing Race, Single Row Use with Tapered Roller Bearing TIM28985 KVAL P/N: TIM28921 Speed Controller, One-touch Fitting, 1/8 NPT - 1/4" OD, Elbow & Universal Types, NAS2201F-N01-07S KVAL P/N: SMCAS2201F1 Timken Bearing Race for the Ball Screw Housing (20mm) KVAL P/N: TIMLM11710 Track Your Order Online at STOREKVALINCCOM 9

10 Making Quality Door and Jamb Machinery Since 1947 INNOVATION QUALITY HONESTY Order Today! Call Front Section Lower Head Assy Timken Bearing for Ball Screw Housing (20mm) 845 KVAL P/N: TIMLM KVALINCCOM More Products Online

11 To see our full line of products, go to kvalinccom and type in Upper Head Assy Find Front Section Upper Head Assy Micro Mini Pre-Wired Rotary Enclosed Switch 914CE16-9 or OMRON D4C-1620 KVAL P/N: 914CE169 Cylinder, Fabco Pancake D-121-X 1/2 Stroke, 1-1/8 Bore KVAL P/N: FABD121X Cylinder, Advance, Hardware, 240 & 300 Series, Clevis KVAL P/N: ADV240M01 Cylinder, Fabco Pancake RK-121 Repair Kit Series KVAL P/N: FABRK121 Cylinder, Advance, 300 X 5" KVAL P/N: ADV300A1R Cylinder, Stroke Pancake X-121-X 3/4 1-1/8 Bore Fabco KVAL P/N: FABX121X Cylinder, Advance, 490 X 4" Sleeve Valve, 3/8", 3-Way KVAL P/N: ADV490A1K KVAL P/N: FOS3W375 Belt, Gearbelt, 1" Wide, 50 Teeth, 187L100 KVAL P/N: BLT187L10 Valve, Humphrey, Air Piloted 501A , 1/2 Ports, 275 CFM AT 125 PSI 2&3WAY,N/0&C KVAL P/N: HUM501A Gearbelt Pulley, 20 Groove, 2357 OD, 20LG075, Use G Bushing KVAL P/N: BRO20LG75 Servo Motor, 3", 2400 rpm, 275 in/lbs, 37 amps or MPM892BSG7G1N KVAL P/N: MPM892BTG7G1N Taper Bushing, Split, G X 19MM Radial Ball Bearing,77R12,3/4" Bore KVAL P/N: BROG19MM KVAL P/N: NAC77R12 Shuttle Valve, 1/4", SV20B, NPT KVAL P/N: DELSV20B Router, Perske, KNS , 5 KW, 18,000-24,000 RPM, 300/400 Hz KVAL P/N: PERKNS22082 Track Your Order Online at STOREKVALINCCOM 11

12 Making Quality Door and Jamb Machinery Since 1947 INNOVATION QUALITY HONESTY Order Today! Call Front Section Upper Head Assy Router Perske, 2HP, 230/380V Hz, RPM, 1/2 Collet Capacity (Includes Wrenches) KVAL P/N: PERKRIS355-2D Speed Controller, In-line, 1/4" KVAL P/N: SMCAS3002 Seal 1/2-ID 875 OD Single Lip KVAL P/N: SEAL08 Pressure Gauge, SMC, K40, 1/8 NPT Thread, 160 PSI KVAL P/N: SMCK10 Seal 1-ID 1567-OD Single Lip KVAL P/N: SEAL16 Valve,VQC or VQC SMC Valve Without Base, Single Acting 24VDC KVAL P/N: SMCVQC Regulator, 1/4" Mini With Check Valve (1/8" Body with 1/4" Ports) KVAL P/N: SMC20001R Valve,VQC AND VQ4000 SMC Valve with 1/4 National Pipe Thread Base Single Acting KVAL P/N: SMCVQC4100-5A Regulator, Bracket, 1/4" Mini KVAL P/N: SMC20001Y Generation 2, 15mm STAR Ball Rail Bearing STA With (2) Seals Installed KVAL P/N: STA S Speed Controller, Standard, 1/4" Right Angle, 1/4 NPT,Metal Body Elbow Style KVAL P/N: SMCAS2102 Generation 2, 25mm STAR Ball Rail Bearing STA With (2) Seals Installed KVAL P/N: STA S Speed Controller, One-touch Fitting, 1/8 NPT - 1/4" OD, Elbow & Universal Types, NAS2201F-N01-07S KVAL P/N: SMCAS2201F1 Timken Bearing Race for the Ball Screw Housing (20mm) KVAL P/N: TIMLM11710 Speed Controller, One-touch Fitting, 1/4 NPT - 3/8" OD, Elbow & Universal Types, NAS2201F-N02-11S KVAL P/N: SMCAS2201F4 Timken Bearing for Ball Screw Housing (20mm) 845 KVAL P/N: TIMLM KVALINCCOM More Products Online

13 To see our full line of products, go to kvalinccom and type in Pre-Drill Gear Box Find Front Section Pre-Drill Gear Box Cylinder, Advance, Hardware, 240 Series, Clevis Double Mount With Pin & Snap Rings KVAL P/N: ADV240M02 Generation 2, 15mm STAR Ball Rail Bearing STA With (2) Seals Installed KVAL P/N: STA S Gearbelt Pulley, 20 Groove, 2357 OD, 20LG075, Use G Bushing KVAL P/N: BRO20LG75 Track Your Order Online at STOREKVALINCCOM 13

14 Making Quality Door and Jamb Machinery Since 1947 INNOVATION QUALITY HONESTY Order Today! Call Back Section Wrench for the Acuraflex Nut Material:CRS Stock Size:1/4 X 2 X 10-1/2 KVAL P/N: ER32 Cylinder, Advance, Hydraulic, 490 X 5" KVAL P/N: ADV490H1R Router Bit, 2-Wing, 2-1/8" Dia, Carbide Tipped, 1/2" Shank KVAL P/N: 2WB34-CT Motor, 3-HP, 3450 RPM, Machined with Taper 145T Frame, 208/ V, 60 HZ, 35R202T123 KVAL P/N: BALM35R202T123 Fasteners,Flat Head,5/16-18 X 1", Grade 8 KVAL P/N: 312CFS100 Motor, 5-HP, 3450 RPM, Machined with Taper 184T Frame With Seal , 208/ V, 60 HZ KVAL P/N: BALM36K887X100S Pulley, Single Sheave Belt Pulley Assembly KVAL P/N: 604A Cylinder, Bimba 1212DP 12" Double Acting Rear Pivot Double End Mount 1-1/4 Bore KVAL P/N: BIM1212DP Cover Nut, ACU KVAL P/N: ACU Cylinder, Bimba 122DP 2" Double Acting Rear Pivot Double End Mount 1-1/4 Bore KVAL P/N: BIM122DP Collet, 1/2-3/4 Capacity KVAL P/N: ACUAF122 Cylinder, Bimba 241DP 1" Double Acting Rear Pivot Double End Mount 1-3/4 Bore KVAL P/N: BIM241DP Collet, 1/2" Capacity, 1/2"-33/64" Capacity, AF123 KVAL P/N: ACUAF123 Cylinder, Bimba 2420DP 20" Double Acting Rear Pivot Double End Mount 1-3/4 Bore KVAL P/N: BIM2420DP Collet, 5/8-3/4 Capacity KVAL P/N: ACUAF130 Cylinder, Bimba 242DXDE 2" Double Acting Double End Rod Mount 1-3/4 Bore KVAL P/N: BIM242DXD 14 KVALINCCOM More Products Online

15 To see our full line of products, go to kvalinccom and type in Back Section Find Back Section Cylinder Hardware, Bimba 240 Foot Mount Bracket 1037 Bore, 3" Long Slotted Base KVAL P/N: BIMC1337 Chipout, Back Section Lock Bevel Material: Ryertex Stock Size: 5/16 X 3-1/2 X 4 KVAL P/N: CHIPOUT05 Cylinder, Bimba, Hardware, 2 Piece Pivot Bracket, 250 Bore 212 Slotted Base KVAL P/N: BIMD1360 Cylinder, Fabco Pancake B-221-X 1/2 Stroke, 1-5/8 Bore KVAL P/N: FABB221X Cylinder, Bimba, Hardware, 120,170 Foot Bracket 75 Bore 250 Long Slotted Base KVAL P/N: BIMD241 Cylinder, Fabco Pancake E-121-X 1" Stroke, 1-1/8 Bore KVAL P/N: FABE121X Gearbelt Pulley, 22 Groove, 3447 OD, 22HH100, Use H Bushing KVAL P/N: BRO22HH10 Cylinder, Fabco Pancake RK-121 Repair Kit Series KVAL P/N: FABRK121 Taper Bushing, Split, H X 19MM KVAL P/N: BROH19MM Cylinder, Fabco Pancake RK-221 Repair Kit Series KVAL P/N: FABRK221 Flat Washer, 1" ID 1-1/2" OD 1/16" Thick, Shim for N2 & N3 Tightener Shaft KVAL P/N: BRON2WSHR Cylinder, Stroke Pancake X-121-X 3/4 1-1/8 Bore Fabco KVAL P/N: FABX121X Idler Shaft, 1" Dia, 4-3/8" OAL, 3/4-10 Thread KVAL P/N: BRON3 Sleeve Valve, 1/4", 3-Way KVAL P/N: FOS3W250 Flange Ball Screw Nut, 32mm Dia, 10mm Lead, KVAL P/N: BSNUT32AO Hairline Pointer, Plastic KVAL P/N: HLPOINTR1 Track Your Order Online at STOREKVALINCCOM 15

16 Making Quality Door and Jamb Machinery Since 1947 INNOVATION QUALITY HONESTY Order Today! Call Back Section Bearing, FB 260 X 1", 2 Hole Mount, Setscrew Locking Relube KVAL P/N: HUBFB2603 Linear Bearing Block With Standard 1 Bearing & 2 Seals 2-3/4 Long 2 Square KVAL P/N: KVALBB16A Bearing, Pillow Block, TPB 250 X 1, Tapped Base Setscrew Locking Relube KVAL P/N: HUBTPB253 Linear Bearing Block, With Steel Linear Ball Bearing, 1" Dia, 2 Seals & Zirk Fitting Hole, 2-3/4" Long 2 Square KVAL P/N: KVALBB16B Air Piloted Valve, Humphrey 250A , Normally Closed 1/4" (64mm), 3-Way Pilot KVAL P/N: HUM250A01 Chuck Tapered 7/8" KVAL P/N: KVASC0028 Valve, Humphrey, Hardware, 8-20A Mounting Base for HUM250A01 & HUM250A02 KVAL P/N: HUM820A Chuck Tapered 1" KVAL P/N: KVASC0032 Bearing, 1-1/2" Open Super Linear Pillow Block KVAL P/N: INASPB240 Fastener,Internal Snap Ring, Used With KVAL Chuck #28 & #32 KVAL P/N: KVASC0098 Bearing, Modified KGXO-24PP 1-1/2" Open Super Linear Pillow Block KVAL P/N: INASPB240M Retainer -- Tapered Chucks (SC0028 and SC0032) KVAL P/N: KVASC0099 Handle, Kip 5/16-18 Thread, 272 Stud Adjustable Handle GN KVAL P/N: KIP38158-BS Shock Absorber, Gas Operated, Kayaba, KG5406 KVAL P/N: KYBKG5406 Linear Bearing Block, With Standard 3/4 Bearing & 2 Seals, 2" Long, 1-1/2 Square KVAL P/N: KVALBB12A Chain, Offset Link, 40 Chain KVAL P/N: LIN KVALINCCOM More Products Online

17 To see our full line of products, go to kvalinccom and type in Back Section Find Back Section Reservoir Hydraulic, Monnier, Seal 1-ID 1567-OD Single Lip KVAL P/N: MON21750 KVAL P/N: SEAL16 Pneumatic Air/Oil Reservoir, , Bowl and Gaskets Kit for Monnier Reservoir, 3-3/8" OD KVAL P/N: MON24555 Seal, V-Ring Seal For Motor Shafts, Baldor 5HP Motor, KVAL P/N: SEAL Reservoir Bowl Gasket, Fits Bowl, Monnier KVAL P/N: MON82747 Seal, 1254" OD X 875" ID, Single Lip KVAL P/N: SEAL8624 Router Bit, Spin On, 1/2" Dia, 1/4-28 Thread, Reverse Helix, KV55253 KVAL P/N: RBSO500 Regulator, 1/4" Mini With Check Valve (1/8" Body with 1/4" Ports) KVAL P/N: SMC20001R Split Collar, One Piece, 3/4" Dia, Steel Regulator, Bracket, 1/4" Mini KVAL P/N: SC112F KVAL P/N: SMC20001Y Split Collar, One Piece, 1" Dia, Steel Speed Controller, In-line, 1/8" KVAL P/N: SC116F KVAL P/N: SMCAS2001 Split Collar, Two Piece, 1" Dia, Steel KVAL P/N: SC216F Speed Controller, Standard, 1/8" Right Angle, 1/8 NPT,Metal Body Elbow Style KVAL P/N: SMCAS2101 Seal, 125 ID X 1629 OD X 3/16 Thick KVAL P/N: SEAL12329 Speed Controller, Standard, 1/4" Right Angle, 1/4 NPT,Metal Body Elbow Style KVAL P/N: SMCAS2102 Track Your Order Online at STOREKVALINCCOM 17

18 Making Quality Door and Jamb Machinery Since 1947 INNOVATION QUALITY HONESTY Order Today! Call Back Section Speed Controller, In-line, 1/4" KVAL P/N: SMCAS3002 Valve, VQC SMC Valve Without Base, Double Acting, 24VDC KVAL P/N: SMCVQC Pressure Gauge, SMC, K40, 1/8 NPT Thread, 160 PSI KVAL P/N: SMCK10 Twist Drill, 1" Dia, 4" Twist, Brad Point, Carbide Tipped, 1/2" Shank, 6" OAL KVAL P/N: TD1664-BPCT Valve, SMC 4-Way Single Pilot With 1/4 Base KVAL P/N: SMCNVSA03 Bearing, Super 16, 1" Closed Linear Ball Bearing KVAL P/N: THOLBB16 Valve,VQC or VQC SMC Valve Without Base, Single Acting 24VDC KVAL P/N: SMCVQC Retaining Ring, External, 3/4" KVAL P/N: THOPR750 Valve,VQC AND VQ4000 SMC Valve with 1/4 National Pipe Thread Base Single Acting KVAL P/N: SMCVQC4100-5A Pump Wrench, 1-5/8" Thin Pattern KVAL P/N: WRENCH KVALINCCOM More Products Online

19 To see our full line of products, go to kvalinccom and type in Jamb Clamp Find Jamb Clamp Cylinder, Advance, Hardware, 240 & 300 Series, Clevis KVAL P/N: ADV240M01 Cylinder, Stroke Pancake G-121-X 1-1/2 Cylinder, Bore Fabco 1-1/8 KVAL P/N: FABG121X Cylinder, Advance, 490 X 1" KVAL P/N: ADV490A17 Cylinder, Fabco Pancake RK-121 Repair Kit Series KVAL P/N: FABRK121 Cylinder, Advance, Hardware, 490 Series, Clevis Double Mount With Pin & Snap Rings KVAL P/N: ADV490M02 Bearing, 1" Closed Super Linear Pillow Block KVAL P/N: INASPBC160 Cylinder, Bimba 122DP 2" Double Acting Rear Pivot Double End Mount 1-1/4 Bore KVAL P/N: BIM122DP Valve,VQC or VQC SMC Valve Without Base, Single Acting 24VDC KVAL P/N: NAC77R08 Cylinder, Bimba 124DP 4" Double Acting Rear Pivot Double End Mount 1-1/4 Bore KVAL P/N: BIM124DP Pad, Delrin 1" Dia X 7/16" NF Thread KVAL P/N: P161607FD Cylinder, Bimba, Hardware, 120,170 Foot Bracket 75 Bore 250 Long Slotted Base KVAL P/N: BIMD241 Pad, Felt, 2" Dia X 1/8" KVAL P/N: P F Air Hose, 5 Bonded Coiled Hose, 10 FT, Tube 1/4", With 8" Tails, Stacked Configuration KVAL P/N: BUCM29720 Pad, Aluminum 2" Dia X 5/16 Thick KVAL P/N: P A Toggle Clamp, Model 56040, 4-3/4" Long, 5/16-18 Female Thread KVAL P/N: DES604 Speed Controller, One-touch Fitting, 1/8 NPT - 1/4" OD, Elbow & Universal Types, NAS2201F-N01-07S KVAL P/N: SMCAS2201F1 Track Your Order Online at STOREKVALINCCOM 19

20 Making Quality Door and Jamb Machinery Since 1947 INNOVATION QUALITY HONESTY Order Today! Call Jamb Clamp Speed Controller, One-touch Fitting, 1/4 NPT - 1/4" OD, Elbow & Universal Types, NAS2201F-N02-07S KVAL P/N: SMCAS2201F2 20 KVALINCCOM More Products Online

21 To see our full line of products, go to kvalinccom and type in Operator Workstation Find Operator Workstation Mushroom Knob, Black, Square D, 1-3/8 in Screw-on for KR24 and SKR24 KVAL P/N: K92B Non-Illuminated Pushbutton Operator Push - Momentary; Pull - Maintained, Square D KVAL P/N: KR9 Pushbutton Contact Square D 1-NO Green KVAL P/N: KA2 Pushbutton Illuminated, Maintained (Push/ Pull), 2 Position, Green Button, 2 NC Contact,Type: K, Size: 30mm, 10A Square D KVAL P/N: KR9P1GH8 Pushbutton Contact Square D 1-NC Red KVAL P/N: KA3 Dual Pushbutton Non-Illuminated, (2) Momentary, Start/Stop, 1 NO & 1 NC Contact,Type: KX, Size: 30mm, 10A KVAL P/N: KXRC136 Pushbutton Operator, Non-Illuminated, Mushroom, Momentary, Type: K, Size: 30mm, Square D KVAL P/N: KR20 Push/Pull Knob, Yellow, Square D, for KR8, KR9, SKR8, SKR9 Operators KVAL P/N: Y22 Pushbutton Non-Illuminated, Momentary, Green Button, 1 NO Contact, Type: K, Size: 30mm, 10A, 600V, Square D KVAL P/N: KR24GH36 Track Your Order Online at STOREKVALINCCOM 21

22 Making Quality Door and Jamb Machinery Since 1947 INNOVATION QUALITY HONESTY Order Today! Call Electrical End Plate For Grounding Terminal Block, Entrelec KVAL P/N: Relay, Finder Relay Socket 9404 For Relay Type 5534 KVAL P/N: 9404 Terminal Block, 6mm, 30A, Grey, Screw 30A/600V Max, Accepts AWG Wire M4/6, Screw Terminal KVAL P/N: Thermal Overload Relay, Class A KVAL P/N: CGT Grounding Terminal Block Entrelec, Green/ Yellow, AWG, 6mm Width Electrically Connected to Rail, KVAL P/N: Sensor, Fixed Range, 2" Fixed Field, 24 Volts DC, 18mm Dia KVAL P/N: DIFUSEFF2-M12 Terminal End Section, Entrelec PLC, OpenNet, Controller, IDEC KVAL P/N: KVAL P/N: FC3A-CP2K Relay, FINDER, , 24VDC, SPDT Interface Relay KVAL P/N: PLC, OpenNet, Expansion Power Supply KVAL P/N: FC3A-EA1 Relay Interface Module,FINDER, ,24VDC KVAL P/N: PLC, OpenNet, Input Module 24 VDC, 16 Point, IDEC KVAL P/N: FC3A-N16B1 Relay, Finder, General Purpose Realy, , 4PDT, 120 V AC Coil (50/60Hz), 7A, 14 Pin KVAL P/N: PLC, OpenNet, Relay Output Module, 16PT KVAL P/N: FC3A-R161 Micro Mini Pre-Wired Rotary Enclosed Switch 914CE16-9 or OMRON D4C-1620 KVAL P/N: 914CE169 PLC, IDEC MicroSmart, 24 I/O PLC KVAL P/N: FC4A-C24R2 22 KVALINCCOM More Products Online

23 To see our full line of products, go to kvalinccom and type in Electrical Find Electrical PLC, Microsmart, 8 Input, 24 VDC Module KVAL P/N: FC4AN08B1 Selector Switch Operator Maintained, 4 Position, Non-Illuminated, Type: K, Size: 30mm, Square D KVAL P/N: KS88 PLC, Microsmart, 16 Input, 24 VDC Module KVAL P/N: FC4AN16B1 Limit Switch, Standard, Micro Switch 1LS312L KVAL P/N: LIMITSWAA PLC, Microsmart, 8 Relay Output Module KVAL P/N: FC4AR081 Limit Switch Low Pre-Travel, Micro Switch 1LS319L KVAL P/N: LIMITSWBB Contactor, LG, 40 Amps KVAL P/N: GMC-40A-120 Limit Switch Arm Outside Offset 1-1/2 Radius with 3/4 Wheel 1/4 Wide KVAL P/N: LSZ55B Pushbutton Contact Square D 1-NO Green KVAL P/N: KA2 Limit Switch Arm Outside Offset 1-1/2 Radius with 3/4 Wheel 1/4 Wide KVAL P/N: LSZ55D Pushbutton Contact Square D 1-NC Red Cord M12 Conn 4 Wire DC 5 Meters KVAL P/N: KA3 KVAL P/N: M12-4PIN-DC-5M Pushbutton Non-Illuminated, Momentary, Green Button, 1 NO Contact, Type: K, Size: 30mm, 10A, 600V, Square D KVAL P/N: KR24GH36 Cord M12 conn 4wire DC 5 Meters Cable 90 Deg Fitting KVAL P/N: M12-4PIN-DC-5M-RA Non-Illuminated Pushbutton Operator Push - Momentary; Pull - Maintained, Square D KVAL P/N: KR9 Disconnect Shaft Stromburg 3/16" X 3/16" X 10-1/2" OAL KVAL P/N: OETLZS49 Track Your Order Online at STOREKVALINCCOM 23

24 Making Quality Door and Jamb Machinery Since 1947 INNOVATION QUALITY HONESTY Order Today! Call Electrical Pistol Handle, Red/ Black, Nema 1, 3R, 12 Accepts 6mm SQ Shaft, 65mm Handle Padlockable KVAL P/N: OHB65J6 Power Supply, PLC, 24V DC, 13 Amps, Input: , 30 Watts, IDEC KVAL P/N: PS5R-SC24 Disconnect Switch, 80 Amp, 3 Poles, ABB, OT80F3, 1SCA105798R1001 KVAL P/N: OT80F3 Turck B12-G12K-AN6X-7M Inductive Proximity Switch 12MM Dia 24 VDC (30MM Length) KVAL P/N: SHORT12DC Disconnect, Neutral For OT63E3 Drive,VM7 230V 2HP VM721P5 KVAL P/N: OTPN63EP KVAL P/N: VM7-230V-2HP Power Pole For OT63E3 KVAL P/N: OTPS63EP Limit Switch Arm,Wide Wheel, 2" Radius with 11/16 DIA X 11/16 Wheel KVAL P/N: WL1A200 Disconnect 6mm Shaft, 290mm long KVAL P/N: OXP6X KVALINCCOM More Products Online

25 To see our full line of products, go to kvalinccom and type in Chipout Find Chipout Chipout, Back Section Lock Bevel Material: Ryertex Stock Size: 5/16 X 3-1/2 X 4 KVAL P/N: CHIPOUT05 Chipout, Commander-Di, Hinge Router, 5/8" Radius (1-1/4" Bit), Natural Canvas Phenolic, 3/4 X 3/4 X 1-7/16 LG KVAL P/N: CHIPOUT81 Chipout, Commander-Di, Hinge Router, 5/8" Radius (1-1/4" Bit), Natural Canvas Phenolic, 3/4 X 3/4 X 1-7/16 LG KVAL P/N: CHIPOUT77 Chipout, Commander-DI, Hinge Router, 5/8 Radius (1-1/4" Bit); Material: Ryertex Stock Size: 3/4 X 3/4 X 1-3/16 KVAL P/N: CHIPOUT82 Mechanical Knob, DK-83, 4-Prong (1-1/4 Dia) 1/4-20 X 7/16 Deep Blind Hole Brass Insert KVAL P/N: REIDK83 Washer, 1/4-ID 7/16-OD 1/16 Thick KVAL P/N: WSHR Pneumatic Cylinder, Bimba 1212DP 12" Double Acting Rear Pivot Double End Mount 1-1/4 Bore KVAL P/N: BIM1212DP Speed Controller, In-line, 1/8" KVAL P/N: SMCAS2001 Cylinder, Bimba 123D 3" Double Acting Front Nose Mount 1-1/4 Bore KVAL P/N: BIM123D Speed Controller, One-touch Fitting, 1/8 NPT - 1/4" OD, Universal Types KVAL P/N: SMCAS2301F Cylinder, Bimba, Hardware, 120,170 Foot Bracket 75 Bore 250 Long Slotted Base KVAL P/N: BIMD241 Valve, SMC 4-Way Single Pilot Without Base KVAL P/N: SMCNVSA01 Filter, 1/2" With Auto Drain, SMC, AF40- N04D-Z KVAL P/N: SMC40004F Valve, SMC 4-Way Double Pilot Without Base KVAL P/N: SMCNVSA04 Track Your Order Online at STOREKVALINCCOM 25

26 Making Quality Door and Jamb Machinery Since 1947 INNOVATION QUALITY HONESTY Order Today! Call Notes 26 KVALINCCOM More Products Online

27 Making Quality Door and Jamb Machinery Since 1947 INNOVATION QUALITY HONESTY Parts Order Form Billing Address Company: Your name: Address: City/State/Zip: Phone: Shipping Address Company: Your name: Address: City/State/Zip: Phone: Shipping Preference UPS Next Day Early AM FedEx Priority Overnight UPS Next Day FedEx Standard Overnight UPS 2nd Day FedEx 2nd Day UPS 3 Day Select FedEx Express Saver UPS Ground FedEx International Priority Common Carrier FedEx International Standard Remember: UPS requires a street address Total $ Sales Tax and Shipping Charges to be determined Thanks for your order! We appreciate your business! Payment Method COD (Collect on Delivery) Established Account ( PO# ) Credit Card* *If Credit Card is chosen, please complete the information below VISA MasterCard American Express Card Number: Cardholder s Name: Expiration Date: Card Validation Value (CVV): (VISA/MasterCard - 3 digit/american Express - 4 digit) Signature Date KVAL Inc 825 Petaluma Blvd So Petaluma, CA PHONE: FAX: WWWKVALINCCOM ORDERS@KVALINCCOM

28 Parts Department Monday thru Thursday 6:00 am to 4:00 pm Pacific Time Friday 6:00 am to 1:00 pm WWWKVALINCCOM Published on 10/1/2014