IPL ILLUSTRATED PARTS LIST THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS:

Transcription

1 IPL MODEL STT ILLUSTRTED PRTS LIST THIS MNUL CONTINS THE ILLUSTRTED PRTS LIST FOR MODELS: 70 STT2-2K with a serial number of to 770 STT2-2CH with a serial number of to 771 STT61-2K with a serial number of to 772 STT61-2CH with a serial number of to 77 STT61-27K with a serial number of to 77 STT72-27K with a serial number of to 77 SMT-2 with a serial number of to 776 SMT-61 with a serial number of to 777 SMT-72 with a serial number of to November, 2001 PRT NUMER 0606

2 MODEL STT Notes.

3 TLE OF CONTENTS TURF TIGER SUJECT... PGE Illustrated Parts List STT2, STT61 Cutter Deck STT72 Cutter Deck... - Cutter Deck Controls Sheet Metal Components Deck Drive Components... - Engine and ttaching Parts (Kohler) Engine and ttaching Parts (2HP & 27HP Kawasaki) rake and Steering Components Fuel and Hydraulic System Hydraulic Pump Electrical System (Kohler) Electrical System (2HP & 27HP Kawasaki) Replacement Decals Electrical Schematic (Kohler) Electrical Schematic (2HP & 27HP Kawasaki)... WE SUPPORT OPE TECHNICIN CERTIFICTION

4 2 & 61 CUTTER DECKS STT 2002 CD-1 1

5 2 & 61 CUTTER DECKS No. No. Description Cutter Deck dvantage x 60 Cutter Deck dvantage x olt, Carriage /16-18 x 1" x x Nut, Hex Serrated Flange /8-16 x x Wing nut, /8-16 x x 8162 nti-scalp Wheel x x olt, Carriage /8-16 x " x x nti-scalp Wheel racket x x olt, Hex Serrated Flange /8-16 x 1" x x 000- Flatwasher, /8" (.688 x 1.7 x.) x x Locknut, /8-16 Center Lock x x 11 6 Discharge Chute dvantage - Small x 26 Discharge Chute dvantage - Large x olt, Hex Head /16-18 x 1-/" - Front x x olt, Hex Head /16-18 x 1-1/2 - Rear Nut, Hex Elastic Stop /16-18 x x Nut, /8-11 UNC x x 0 Push rm Shaft x x olt, Hex Head /8-11 x -1/2" x x olt, Carriage /16-18 x /" x x olt, Hex Head /16-18 x -1/2" x x Key, 1/ x 1/ x 2" x x Key, 1/ x 1/ x 1-1/" x x Flatwasher,/8-. x.8 x. HD x x olt, Hex Head /16-18 x 1-1/" x x olt, Hex Head /16-18 x 1-1/2 x x Nut, Hex Serrated Flange /16-18 x x olt, Hex Head 1/2-20 x /" x x ushing,.76 I.D. Oilite x x Lockwasher, /16" x x Flatwasher, /16" (.7 x.87 x.08) x x Flatwasher, /8" (.1 x.8 x.) x x Nut, Hex Elastic Stop /8-16 x x olt, Hex Head /8-16 x -1/" x x olt, Hex Head /8-16 x 2-1/2" x x olt, Hex Head /8-16 x 1-1/2" x x olt, Hex Head /8-16 x 1-1/2" Grade 8 x x 661 Spindle ssembly x x 8 Spindle Shaft x x 6 82 Seal, Top x x earing ssembly x x 8 2 Spindle Housing x x No. No. Description 2 61 Spacer, Outside x x 0 26 Spacer, Inside x x 1 82 Seal, ottom x x 2 27 Spindle ushing, ottom x x 8 Nut, Special 1-1/16-18 x x Grease Fitting x x 8677 Relief Fitting, Tapered Spindle x x Spring, Discharge Chute x x Wheel, nti-scalp x x Cutter lade, 18" x 826 Cutter lade, 21" x 86 Gearbox ssembly, Deck Drive x x elt, Cutter Deck Drive x 88 elt, Cutter Deck Drive x 1 Roller Shaft x x Tapered Hub, 1-1/8" ore x x 811 Tapered Hub, 1" ore x x 6117 Idler rm, Cutter Deck x x 822 earings, all x x Pulley, Idler x x ase, Idler Pivot x x 8 82 Pulley,.7 O.D. (2 ) x 80 Pulley, 6.7 O.D. (61 ) x 2226 Mounting Plate, Gearbox x x elt, Cover x 22 elt, Cover x Pusharm (incl. items, 62, 6 & 6) x x 62 0 Spacer, Spindle ottom x x Nut, Hex Head /8-18 UNF x x Rod End, /8" Male RH Thread x x olt, Hex Head /8-11 x -1/2" x x Spring, Cutter Deck x x Pulley, 6. O.D. x 80 Pulley, 6. O.D. x U-Nut, /8-16 x x Nut, Hex Elastic Stop /8-11 x x Discharge affle 2 x Discharge affle Pivot, Idler - Short x x ushing x x olt, Carriage /8-16 x 1 x x Guide, Roller x x * Common hardware which should be purchased locally. ll bolts Grade plated, all other fasteners zinc plated. 2

6 72 CUTTER DECK STT CD-1 16

7 72 CUTTER DECK No. No. Description Cutter Deck, 72 dvantage (Includes Decals) olt, Carriage /16-18 x 1" Nut, Hex Serrated Flange / Wing nut, / nti-scalp Wheel olt, Carriage /8-16 x " nti-scalp Wheel racket olt, Hex Serrated Flange /8-16 x 1" 000- Flatwasher, /8" (.688 x 1.7 x.) Locknut, /8-16 Center Lock Discharge Chute, 61 & 72 dv olt, Hex Head /16-18 x 1.7" (Front) olt, Hex Head /16-18 x 1.0 (Rear) Nut, Hex Elastic Stop / Nut, /8-11 UNC 0 Push rm Shaft olt, Hex Head /8-11 x.0" olt, Carriage /16-18 x.7" olt, Hex Head /16-18 x.7" Key, 1/ x 1/ x 2" Key, 1/ x 1/ x 1.2" Flatwasher,/8-. x.8 x. HD olt, Hex Head /16-18 x 1.0" olt, Hex Head /16-18 x Nut, Hex Serrated Flange / olt, Hex Head 1/2-20 x.7" ushing,.76 I.D. Oilite Lockwasher, /16" Flatwasher, /16" (.7 x.87 x.08) Flatwasher, /8" (.1 x.8 x.) Nut, Hex Elastic Stop / olt, Hex Head /8-16 x.2" olt, Hex Head /8-16 x 2.0" 2 0 Pivot, Idler - Short olt, Hex Head /8-16 x 1.0" Grade Spindle ssembly 8 Spindle Shaft 6 82 Seal, Top earing ssembly 8 2 Spindle Housing Spacer, Outside 0 26 Spacer, Inside No. No. Description 1 82 Seal, ottom 2 27 Spindle ushing, ottom 8 Nut, Special 1-1/ Grease Fitting 8677 Relief Fitting, Tapered Spindle Spring, Discharge Chute Guide, Roller Cutter lade, 2." Gearbox ssembly, Deck Drive elt, Cutter Deck Drive, 72 1 Roller Shaft Tapered Hub, 1-1/8" ore 811 Tapered Hub, 1" ore 6117 Idler rm, Cutter Deck 822 earings, all Pulley, Idler ase, Idler Pivot Pulley, 6. O.D Mounting Plate, Gearbox elt Cover, LH elt Cover, RH Pusharm (includes items, 62, 6 & 6) Spacer Nut, Hex Head /8-18 UNF Rod End, /8" Male RH Thread olt, Hex Head /8-11 x -1/2" Spring, Cutter Deck Pulley, 6. O.D U-Nut, / Nut, Hex Elastic Stop / Discharge affle Guide Roller 72 0 Spacer, Spindle ottom olt, Carriage /8-16 x 1 * Common hardware which should be purchased locally. ll bolts Grade plated, all other fasteners zinc plated.

8 CUTTER DECK CONTROLS CUTTER DECK STT2002CDC

9 No. No. Description CUTTER DECK CONTROLS Flatwasher, / Link, Deck Lift 8176 Rod End, Female - 1/2-20 RH Rod End, Female - 1/2-20 LH Nut, Jam 1/2-20 RH Nut, Jam 1/2-20 LH Nut, /8-16 Elastic Stop Slide Weldment, Height djustment 1 Spacer, Decklift Pedal 87 Pin, Decklift Swivel Joint, LH 27 Swivel Joint, RH 0 ellcrank Weldment, LH Rear 1 0 ellcrank Weldment, RH Rear Locknut, /8-16 Center Lock Guide, Short Guide, Long Lockplate, Decklift 1 67 Deck Latch (Includes items 20& 21) ushing,.02 ID Grip, Deck Latch Spring, Helper (61 & 72 Cutter Decks Only) Foot Pedal, Height djustment Nut, Hex / Nut, Hex Serrated Flange / Flatwasher, /8" (.66 x 1. x.0) Flatwasher, 1" (1.062 x 1.0 x.08) Grease Fitting Cotter Pin, /16 x Nut, Hex Elastic Stop / Stud, /8-11 x 22.0" Ring Pin, 1/2 x.0" Ring, Retaining 1" External "E" Nut, Hex Elastic Stop 1/ olt, Carriage /8-16 x 1-1/" 6 26 racket, Cutting Height djustment Screw, Cap /16-18 x " FHHS 8 87 Lanyard, Deck Height Pin 80 Chain olt, Hex Head /8-16 x 1-1/2" Nut, Hex Serrated Flange / Ring, Retaining 1/2" External "E" olt, Hex Head 1/2- x " olt, Carriage /16-18 x 1" olt, Shoulder 1/2 x /" * Common hardware which should be purchased locally. ll bolts Grade plated, all other fasteners zinc plated. 6

10 7 Section 8 SHEET METL COMPONENTS STT 2002 SMC

11 SHEET METL COMPONENTS No. No. Description No. No. Description Fender Weldment, RH olt, Hex Head, /16-18 x 1, Zinc 606 Spacer Flatwasher, /8-.1 x.8 x. 18 Seat Plate Weldment Seat ssembly w/armrest olt, Hex Head /8-16 x Nut, Elastic Stop / attery 80 Pad, attery Cover Cover, attery 000- olt, Carriage /16-18 x /" 208 Plate, attery ox Wing Nut, 1/-20 x /" Nut, Hex Serrated Flange / olt, Carriage 1/-20 x 6" Rubber Pad 18 8 Spacer, Caster Wheel olt, Carriage /16-18 x 1" Seal Lock Nut, /8-16, Elast. Stop 22 Main Frame Nut, Hex Serrated Flange / Screw, Hex Serrated Flange /8-16 x Fender Weldment, LH Foot Plate Nut, Hex Elastic Stop / olt, Hex Head /8-16 x olt, Hex Head /8-11 x Nut, Hex Elastic Stop / Cap, Grease Nut, Hex Elastic Stop earing W/Race Plug, 1/- THD Form 1 Extention Weldment, Caster 2 (LH) 0 Extention Weldment, Caster 2 (RH) & 61 (LH) 1 Extention Weldment, Caster 61 (RH) 2 Extention Weldment, Caster 72 (LH) Extention Weldment, Caster 72 (RH) 6 82 Seal, 2.00 OD. x 1.62 ore Nut, Hex Elastic Stop 1/2-8 Yoke Weldment, Caster (2) 116 Yoke Weldment, Caster (61 & 72) olt, Hex Head 1/2- x 7-1/2" (2) olt, Hex Head 1/2- x -1/2 (61 & 72) 0 81 Sleeve, Caster Wheel (2) 8 Sleeve, Caster Wheel (61, 72) Wheel ssy, 2 (Inc.items 20, 2,,, ) 820 Wheel ssy, 61, 72 (Inc.items 20, 2,,, ) Tire, x.00 -Ply (2) 8261 Tire, x 6.0 -Ply (61, 72) 8262 Rim ssembly, 2 (Includes item ) Rim ssembly, 61 & 72 (Inc. item ) Flatwasher, /8 -.1 x.8 x. 88 umper, Rubber Cable, Seat Stop olt, Hex Head 1/-20 x 1-1/" Nut, Hex Serrated Flange 1/ Seat djustment, Track Set 0 6 Caster Wheel ssy (Inc. 1 thru ) 2 (RH) 616 Caster Wheel ssy (Inc. 1 thru ) 2 (LH) 617 Caster Wheel ssy (Inc. 1 thru ) 61 (LH) 618 Caster Wheel ssy (Inc. 1 thru ) 61 (RH) 61 Caster Wheel ssy (Inc. 1 thru ) 72 (LH) 60 Caster Wheel ssy (Inc. 1 thru ) 72 (RH) ack Cushion Cover Seat Cushion Cover rm Rest, Right Hand rm Rest, Left Hand rm Rest Cover earing w/ Race Grease Fitting 6 88 Spring, Seat 7 62 Pin Retainer, Spring Roll Pin, Spring /2 x / * Common hardware which should be purchased locally. ll bolts Grade plated, all other fasteners zinc plated. 8

12 DECK DRIVE COMPONENTS Section C C Frame STT 2002 DDC

13 No. No. Description DECK DRIVE COMPONENTS No. No. Description 1 22 elt Guard 2 81 Hinge, elt Guard olt, Carriage 1/-20 x 1/2" Nut, Hex Serrated Flange 1/ olt, Carriage 1/-20 x /" 6 76 Spacer, Idler Pivot olt, Hex Head /8-16 x 1" Nut, Hex Elastic Stop / umper, Rubber Nut, Hex Serrated Flange / elt, Deck Drive 817 elt, Pump Drive 822 Spring, Main Drive 1 Pump Mounting Weldment (ir Cooled) 182 Pump Mounting Weldment (Liquid Cooled) 001- Washer olt, Hex Head, 1/-20 x Spacer Electric Clutch Key, 1/ x 1/ x 1-1/2" Lockwasher, 7/16" olt, Hex Head 7/16-20 x 2-1/2" Clamp, Cable 1/2" ID Lockwasher, /16" Tapered Hub, MM ore Pulley,. OD. 1. ore Lockwasher, 1/" Stud, nti-rotation Rue Pin Cotter, / Nut, Hex Elastic Stop / olt, Hex Head /8-16 x 2-1/" Flatwasher, /8" (.1 x.8 x.) Pulley, Idler 67 Idler rm W/earings (Includes Item ) 00-0 Flatwasher, /8 Grade 8 Special 822 all earings Nut, Hex Serrated Flange / olt, Hex Head /8-16 x 1-1/2" 8 88 Pulley, 6. Dia. Taper ore 86 Tapered Hub, 1.00 ore 0 60 Pivot, Idler Pump olt, Hex Head /8-16 x -/" 2 61 Idler rm ssembly (Includes item ) Lockwasher, /8" Nut, Hex / Spacer Locknut, Hex Center Lock / Pulley, Idler.00 Dia Pulley Key, x x 2 mm 0 80 Latch, Hood Screw, Phillips Washer Head #-2 x 1/2" Lockwasher, #-2 External Tooth Nut, Hex # Spindle ssembly (Includes items 7 thru 67) olt, Hex Head /16-18 x 1-/" Key, 1/ x 1/ x 1" 7 2 Spindle Housing 8 26 Spacer, Inside 27 Spindle ushing, ottom 60 Spacer, Outside Shaft, PTO Deck Drive Roller earing ssembly 6 82 Seal, 2.00 OD. x 1.0 ore 6 82 Seal, 2.00 OD. x 1.62 ore 6 8 Nut, Grease Fitting 1/- Self Tap Relief Fitting Drive Shaft (ir Cooled) 828 Drive Shaft (Liquid Cooled) olt, Hex Head 1/-20 x 1-/8" Full Thread olt, Hex Head /8-16 x Rod ssembly, Clutch nti-rotation olt, Hex Head /8-16 x 1-/ Key, 1/ x 1/ x Nut, Center Lock / Screw, Set /8-16 x / olt, Hex Head /8-16 x 2.00 * Common hardware which should be purchased locally. ll bolts Grade plated, all other fasteners zinc plated.

14 ENGINE ND TTCHING PRTS - KOHLER REF. PUMP MTG. WELDMENT FRME STT 2002 EPKH 11

15 No. No. Description ENGINE ND TTCHING PRTS - KOHLER 1 22 Muffler Guard Screw, Hex Serrated Flange 1/-20 x /" * Muffler, Part Of Engine (vailable only through Kohler) 82 Oil Drain Extension U-Nut, 1/ Exhaust Elbow 7 21 Spacer, Engine (Kohler) Engine, Kohler 2 CH (vailable only through Kohler, Eng. Spec. PS 686) olt, Hex Head /8-16 x 1" Lockwasher, /8" Spring olt, Hex Head /8-16 x 1-/" Nut, Hex Elastic Stop / olt, Hex Head /8-16 x 1-1/" 1 Plate, Engine Mounting 000- olt, Carriage /16-18 x /" Nut, Hex Serrated Flange / Rear Cover Hour Meter * Common hardware which should be purchased locally. ll bolts Grade plated, all other fasteners zinc plated.

16 ENGINE ND TTCHING PRTS - 2HP &27HP KWSKI REF. PUMP MTG. WELDMENT FRME STT 2002 EPK

17 ENGINE ND TTCHING PRTS - 2HP & 27HP KWSKI No. No. Description 1 78 Muffler Guard Screw, Hex Serrated Flange 1/-20 x /" 8282 Muffler 821 Extension, Oil Drain U-Nut, 1/ Hour Meter 7 60 Spacer, Engine (Kawasaki) 8 82 Engine, Kawasaki 2K (vailable only through Kawasaki) Engine, Kawasaki 27K (vailable only through Kawasaki) olt, M-1.0 x 2 Grade Lockwasher, /8" Spring olt, Hex Head /8-16 x 1-/" Nut, Hex Elastic Stop / olt, Hex Head /8-16 x 1-1/" 1 Plate, Engine Mounting 000- olt, Carriage /16-18 x /" Nut, Hex Serrated Flange / Rear Cover Screen Weldment, Radiator * Common hardware which should be purchased locally. ll bolts Grade plated, all other fasteners zinc plated. 1

18 RKE ND STEERING COMPONENTS 1 TO RH PUMP TO LH PUMP STT2002&SC 70 2

19 No. No. Description RKE ND STEERING COMPONENTS No. No. Description Grip, Handle ar Handle ar (Includes item 1) olt, Hex Head /8-16 x 1-1/" Lockwasher, /8" Flatwasher. /8" (.1 x.8 x.) ar, Control Lever 7 18 Control Lever Weldment, LH 18 Control Lever Weldment, RH olt, Hex Head /16-18 x 2" Nut, Hex Elastic Stop / olt, Hex Head /8-16 x 2" Nut, Hex Elastic Stop 288 Mount, Control Linkage 822 all earings, Neutral Return Spacer Pin, Rue Cotter /8 Dia olt, Hex Head, /16-18 x 2.7 Zinc Nut, Hex Elastic Stop / racket, Control Lever LH 287 racket, Control Lever RH olt, Carriage /16-18 x 1" Spacer, earing olt, Carriage /16-18 x /" Nut, Hex Serrated Flange / Ring, Retaining /8" External "E" Spacer 2 18 racket, Neutral Return olt, Carriage 1/-20 x /" Flatwasher, 1/" (. x.70 x.06) Nut, Hex Elastic Stop 1/ Pin, Retaining Spring 0 88 Spring Roll Pin, Spring /2 x /" Pin, Cotter /16 x 1-1/2" 8286 Rod End, Male /8-2 RH Thread Nut, /8-2 RH Thread 6 Tube, Control Link ir Cooled Engine 62 Tube, Control Link Liquid Cooled Engine Nut, Hex /8-2 LH Thread Rod End, Male /8-2 LH Thread Locknut, /16-18, Elastic Stop 822 Gas Damper olt, Hex Head /8-16 x 2-1/ Grease Fitting Lever, Parking rake (Includes item) 88 Grip, Parking rake olt, Hex Head /8-16 x 2-/" Nut, Hex Serrated Flange / Clevis, Traction Control Pin, Clevis /8-16 x 1-1/16" Pin, Cotter /2 x Rod, Parking rake 0 8 Rod End, LH Thread ushing, Self lign olt, Hex Head /16-18 x /" olt, Hex Hd /8-2 x -1/", 2/" Thrd 8167 Switch 00- Screw, Hex SLTD WSHR Head # 2 x /" rake Linkage, LH 6172 rake Linkage, RH 7 ellcrank, rake ctuator Spring olt, Hex Head 1/2- x -/" Locknut, Hex 1/2- Center Lock olt, Hex Head 1/2- x 2-1/2" Wheel Motor, Ross olt, Hex Head, /16-18 x 1.7, Zinc rake and ssembly Pin, Clevis /8" Dia. x 1." Spacer Wheel Hub/rake Drum ssembly Key, Woodruff /16 x Wheel ssembly 2 x.- (2 Only) 816 Rim W/Valve Stem (2 Only) Tire, 2 x.- (2 Only) 8180 Wheel ssembly 2 x - Turf Master 8181 Rim W/Valve Stem 8182 Tire, 2 x - Turf Master Lug Nut, 1/ Nut, Hex Castle Threaded Plate olt, Hex Head /8-16 x 1-1/2" Plate Weldment, Motor acking 7 21 ctuator Switch olt, Hex Serrated Flange /16-18 x /" olt, Carriage /8-16 x -/ olt, Hex Head /8-16 x Switch olt, Hex Head /8-16 x 1-1/ Grade 8 * Common hardware which should be purchased locally. ll bolts Grade plated, all other fasteners zinc plated. 16

20 FUEL ND HYDRULIC SYSTEM 1 DUMP VLVE 7 6 (2) D 2 2 C (2) H I D E F G To Carbur To ack Side of Reservoir (Not Shown) H 21 1 I G Z E D F 6 7 Z C 2002 STT F&HS.eps 17

21 No. No. Description FUEL ND HYDRULIC SYSTEM No. No. Description U-Nut 1/ Hose Clamp, 0.6 dia olt, Hex Head 1/-20 x Hose, /8 ID Pushlock - (order by inch) Clamp, Hose 1/ Elbow, 0 Degree - /16 O-ring x /8 Hose Elbow, 0 Degree - / O-ring x /8 Hose Oil Filter ase 8206 Hose ssembly, 1/2 ID (Tank to Filter ase) ** Fuel Hose to Carb. 11 ** Fuel Filter 808 Fuel Hose, 1/ ID. (order by inch) 868 Valve, Shutoff Kohler 817 Valve, Shutoff Kawasaki Clamp, Fuel Hose 808 Fuel Hose, 1/ ID. (order by inch) Hose Fitting ushing olt, Hex Head /16-18 x1.0 Zinc Nut, Serrated Flange / Oil Filter 21 8 Tee, / O-ring x JIC x 1/2 Hose Nut, Hex Elastic Stop 1/ Cap, Hydraulic Tank Insert, Filler Neck O-Ring Oil Reservoir ssembly (Includes 2, 27, ) Elbow, 0 Degree, /16-18 JIC x /16 O-Ring 86- Hose Clamp, 0.6 dia Hose, /8 ID, Pushlock (order by inch) Screw, Phillips Head, 1/ Cap 2 6 Fuel Tank ssembly (includes items 2 & 2) 86-0 Clamp, Hose 80-0 Elbow, 0 Degree, 7/8-1 THD ushing, 7/8-1 JIC x /-16 O-Ring 6 28 Support racket, Fuel Tank Nut, /16-18 Serrated Flange olt, Carraige 1/-20 x / 827 Elbow, 0 Degree 0 2 Strap, Hydraulic Tank 1 28 Support racket, Hydraulic Tank Hose ssembly, Pump Union, /-16 JIC x /-16 O-ring olt, Hex Head, 1/-20 x Lockwasher, 1/ Spring Roll Pin, Spring /16 x / olt, Hex Serrated Flange, 1/-20 x / Lever, Control 20 Clamp Plate, Pump Control lock, Pump Control Pump, Left Hand, DP Nut, Hex, Elastic Stop / olt, Hex Head, /8-16 x 1-1/ 82 Pump, Right Hand, DP Cap, Fuel Tank W/Guage Nut, Hex Elastic Stop / Flatwasher, /8 (.1 x.8 x.) Grade Mounting racket - LH, Oil Cooler 22 Mounting racket - RH, Oil Cooler olt, Hex Head /16-18 x / Cooler, Oil Clamp,.6 Dia. * Common hardware which should be purchased locally. ll bolts Grade plated, all other fasteners zinc plated. ** vailable through the individual engine manufacturer. 18

22 DP- HYDRULIC PUMP SSEMLY Section 8 2 Overhaul Seal Kit PORT "" SIDE PORT "" SIDE 0 1

23 DP- HYDRULIC PUMP SSEMLY No. No. Description 1 HG 7016 Housing Kit 2 HG 707 End Cap Kit HG 061 Straight Headless Pin HG 06 Hex Flange olt, M8-1.2 x 60mm HG 2 Housing O-Ring 6 HG 2027 Charge Pump Kit 7 HG 027 Gerotor ssembly 8 HG O-Ring HG 00 Socket Head Screw, M6 x mm HG 200 ypass Valve Kit 11 HG 7021 Pumpshaft Kit HG 0 all earing, 17 x 0 x HG 1161 Lip Seal 1 HG 02 Retaining Ring HG 01 Spacer 16 HG 701 Cylinder lock Kit 17 HG lock Spring 18 HG lock Thrust Washer 1 HG 1 Valve Plate 20 HG Swash Plate 21 HG 01 all Thrust earing 22 HG Trunnion rm 2 HG Slot Guide 2 HG 2062 Check Valve Kit (.02 Orfice) port on Left Hand Pump, port on Right Hand Pump 2 HG 700 Charge Relief Kit 26 HG 20 Trunnion Seal with Retainer 27 HG Straight Thread Plug HG 008 Straight Headless Pin 2 HG 702 Overhaul Seal Kit 0 HG 708 System Check Relief Kit, port on Left Hand Pump, port on Right Hand Pump 20

24 ELECTRICL SYSTEM (KOHLER) 27 1 C C STT 2002 ESKH 21

25 No. No. Description ELECTRICL SYSTEM (KOHLER) 1 82 Wire Harness, STT ir Cooled Fuse, 20 MP Key & Ring ssembly Nut, Hex / Lockwasher, /8" Internal Instrument Panel, Top W/Decals Key Switch Switch, PTO 8788 Relay Lockwasher, # External Tooth Nut, Hex # mmeter 81 ase, Instrument Panel Lockwasher, 1/" olt, Hex Head 1/-20 x /" U-Nut, 1/ Throttle nd Choke Controls Screw, Phillips Washer Head #-2 x 1/2" Switch, Interlock-Seat olt, Hex Head 1/-20 x 1/2" Cable, attery - Red Nut, Hex 1/ Cable, attery - lack Clamp, Cable 1/2" ID Clamp, Cable /" ID Electronic Module olt, Hex Head M8-1.2 x Lockwasher, /16" External Tooth 2 80 Fuse Holder w/fuse and Connector 8288 Clip, Fuse Holder * Common hardware which should be purchased locally. ll bolts Grade plated, all other fasteners zinc plated. 22

26 ELECTRICL SYSTEM (2HP & 27HP KWSKI) C C STT2002 ESK 2

27 ELECTRICL SYSTEM (2HP & 27HP KWSKI) No. No. Description mmeter Fuse, 20 MP Key & Ring ssembly Nut, Hex / Lockwasher, /8" Internal Instrument Panel, Top W/Decals Key Switch Switch, PTO 8788 Relay Lockwasher, # External Tooth Nut, Hex # Water Temp. Gauge (STT - K Only) 81 ase, Instrument Panel Lockwasher, 1/" olt, Hex Head 1/-20 x /" U-Nut, 1/ Throttle nd Choke Controls Screw, Phillips Washer Head #-2 x 1/2" Switch, Interlock-Seat olt, Hex Head 1/-20 x 1/2" Cable, attery - Red Nut, Hex 1/ Cable, attery - lack Clamp, Cable 1/2" ID Clamp, Cable /" ID Clamp, Cable Sending Unit, Water Temp. 828 Wire Harness, STT Liquid Cooled Lockwasher, /16" External Tooth olt, Hex Head M8-1.2 x Electronic Module Heatshield, Flexible 80 Fuse Holder w/fuse and Connector 8288 Clip, Fuse Holder * Common hardware which should be purchased locally. ll bolts Grade plated, all other fasteners zinc plated. 2

28 REPLCEMENT DECLS ND INFORMTION PLTES 1 2 FORWRD F R REVERSE Heavy-Duty Commercial WRNING INSTLL ELT COVER EFORE OPERTING MCHINE RED OPERTOR'S MNUL MOWER DECK PULL OUT TO ENGGE PUSH IN TO DISENGGE OFF ON STRT 8208 MOWER DECK PULL OUT TO ENGGE PUSH IN TO DISENGGE 11 1 CHOKE SLOW FST STT 2002 Decals 1 2

29 R 86 Section 8 REPLCEMENT DECLS ND INFORMTION PLTES No. No. Description 1 82 Decal, Danger-Spining lades Decal, Warning-Rotating lades 81 Decal, 2 dvantage 81 Decal, 61 dvantage 816 Decal, 72 dvantage 8220 Decal, Fuel Tank 866 Decal, Patents Decal, Traction Control Decal, Heavy Duty Commercial 8 80 Decal, MetalCraft-Made In US 8 Decal, elt Cover 82 Decal, Instrument Panel-Upper (ir Cooled) Decal, Instrument Panel-Upper (Kawasaki) 8207 Decal, Instrument Panel-Lower 826 Decal, Cutting Height - Lower Decal, Start/Drive Procedure 82 Decal, Seat Support Decal, Turf Tiger Decal, Turf Tiger Decal, Stripes-RH Decal, Stripes-LH Decal, Tiger Decal, Warning Decal, Cutting Height - Upper STT Decals Page2 26

30 27 Section 8 SET SWITCH + - INSTRUMENT PNEL HOURMETER MOWER ENGGE SWITCH KEY SWITCH MMETER ELECTRIC CLUTCH RKE INTERLOCK SWITCH TTERY RELY GROUND SOLENOID STRTER ENGINE FUSES 20 MP RN LU GRN GRN/WHT ENGINE HRNESS /YEL ELECTRICL SCHEMTIC (KOHLER) /YEL STTSKH RH NEUTRL SWITCH LH NEUTRL SWITCH /WHT /WHT YEL C D E F G H YEL /YEL GRN YEL/ YEL YEL WHT WHT WHT GRN/ WHT PINK MODULE PLUG ORN ORN RN LITE/LUE WHT GRN/ LT/LU LUE

31 SET SWITCH + - I S G INSTRUMENT PNEL HOURMETER WTER TEMP MOWER ENGGE SWITCH KEY SWITCH MMETER ELECTRIC CLUTCH RKE INTERLOCK SWITCH TTERY RELY GROUND SOLENOID STRTER ENGINE FUSES 20 MP RN LU GRN GRN/WHT ENGINE HRNESS /YEL GRN/WHT ELECTRICL SCHEMTIC (2HP &27HP KWSKI) /YEL STT2001 2&27HP SK RH NEUTRL SWITCH LH NEUTRL SWITCH /WHT /WHT YEL C D E F G H YEL /YEL /YEL GRN YEL/ /YEL /YEL YEL YEL WHT/ MODULE PLUG FUEL PUMP ORN ORN RN LU LT/LU WHT GRN GRN LT/LU WHT PINK WHT/ WHT WHT