PLASTICA ALFA. Compression. Fittings. Pipe Saddles. For use. with. Polyethylene. Pipe PRODUCT CATALOGUE PROUDLY IMPORTED BY.
|
|
|
- Alexandrina Todd
- 5 years ago
- Views:
Transcription
1 Compression PRODUCT CATALOGUE Fittings & Pipe Saddles For use with Polyethylene Pipe DPI Trading PROUDLY IMPORTED BY
2 Technical Information Body: black polypropylene (PP) Nut: blue polypropylene (PP) O-ring: nitrile rubber 70 Shore (NBR) Cliching ring: acetal resin 9(POM) Reinforcing ring: stainless steel AISI 430" Compression Fittings PN 16 for fittings from Ø 16 mm to Ø 63 mm SANS (ISO 14236) PN 10 for fittings from Ø 75 mm to Ø 110 mm SANS (ISO 14236) (Maximum working pressure at the temperature of 20ºC.) Special pieces suitable for the conveyance of drinking water, wine, drinks and alimentary fluids according to the applicable regulations in Italy and other countries. Assembly Instructions The BLACK LINE compression fittings are in conformity with the standard UNI 9561, uni 9562, uni en , uni iso 7/1 and ISO 14236, AND SANS 14236
3 Coupling Reducing Coupling * Also available in 50 x 32mm Male Adaptor x½ 16x¾ 20x½ 20x¾ 25x½ 25x¾ 32x¾ 32x1¼ 40x1¼ 40x1½ 50x1½ 63x1½ 63x2½ 75x2" 75x2½ 75x3" 90x2" 90x3" 90x4" 110x3" 110x4" * Also available in 50 x 1¼ 65 x 1¼
4 Female Adaptor x½ 16x¾ 20x½ 20x¾ 25x½ 25x¾ 32x¾ 40x1¼ 40x1½ 50x1¼ 50x1½ 75x2½ * Reduced pressure PN 10 * * Also available in 90 x 4" End Cap º Elbow
5 90º Male Threaded Elbow x½ 20x½ 20x¾ 25x½ 25x¾ 32x¾ 32x1¼ 40x1¼ 40x1½ 50x1¼ 50x1½ 63x1½ 63x2½ 75x2½ 90º Female Threaded Elbow x½ 16x¾ 20x½ 20x¾ 25x¾ 32x¾ x1¼ 50x1½ 75x2½ * Reduced pressure PN 10 * * Also available in 25 x ½ 50 x 2" 63 x 1½
6 45º Elbow º Male Threaded Elbow º Female Threaded Elbow
7 90º Tee º Reducing Tee ** ** ** Available on request 90º Male Threaded Tee ** ** x½ 16x¾ 20x½ 20x¾ 25x½ 25x¾ 32x¾ 40x1¼ 40x1½ 50x1½ 63x2½ 75x2½ 75x3" 90x4" ** Available on request
8 90º Female Threaded Tee ** x½ 16x¾ 20x½ 20x¾ 25x¾ 32x¾ x1¼ 40x1½ 50x1½ 63x2½ 75x2½ * Reduced pressure PN10 ** Available on request * * Also available 25 x ½ 50 x 1¼ 90 x 4" Nut
9 Thrust Ring Clinching Ring O Ring
10 Technical Information CLAMP SADDLE Body: black polypropylene Gaskets: nitrile rubber 70 Shore (NBR) Bolts: galvanized steel Reinforcing ring: stainless steel AISI 430" Clamp Saddles POLYPROPYLENE 100ºC 10 BAR without reinforcing ring ø 20 ø 63 6 BAR without reinforcing ring ø 75 ø BAR with reinforcing ring : ø 20 ø BAR with reinforcing ring ø 75 ø 315 (maximum working pressure at the temperature of 20ºC) Special qualified pieces to the conveyance of drinking water and alimentary fluids. Assembly Instructions The Clamp saddles are in conformity with the standard UNI EN ISO e UNI EN 10226/1, ANSI/ASME B For PE pipes in conformity with the standard UNI 7990, INI EN UNI EN ISO 15494/ SANS After locating the site, prepare the clamp saddle, the bolts and the o ring 2. Position the saddle lower part on the pipe 3. After inserting the o ring in its proper seat, position the saddle upper part and start screwing the bolts. 4. Screw the bolts with a key to make the saddle adhere to the pipe. 5. Drill the pipe perpendicularly. The threaded part is ready to be connected.
11 Product Catalogue Clamp Saddle for PE and PVC Pipes A without reinforcing ring B with reinforcing ring No. Size Bolts of Bolts x ½ 25 x ¾ 32 x ½ 32 x ¾ 32 x 1" 40 x ½ 40 x ¾ 40 x 1" 50 x ½ 50 x ¾ 50 x 1" 50 x 1¼ 63 x ½ 63 x ¾ 60 x 1" 63 x 1¼ 63 x 1½ 75 x ½ 75 x ¾ 75 x 1" 75 x 1¼ 75 x 1½ 75 x 2" 90 x ½ 90 x ¾ 90 x 1" 90 x 1¼ 90 x 1½ 90 x 2" 110 x ½ 110 x ¾ 110 x 1" 110 x 1¼ 110 x 1½ 110 x 2" 110 x 2½ 110 x 3" 125 x ¾ 125 x 1" 125 x 1¼ 125 x 1½ 125 x 2" 125 x 2½ 140 x 1" 140 x 1¼ 140 x 1½ 140 x 2" 140 x 3" 160 x ½ 160 x ¾ 160 x 1" 160 x 1¼ 160 x 1½ 160 x 2" 160 x 3" 160 x 4" 200 x ¾ 200 x 1" 200 x 1¼ 200 x 1½ 200 x 2" 200 x 3" 200 x 4" 225 x ½ 225 x ¾ 225 x 1" 225 x 1¼ 225 x 1½ 225 x 2" 225 x 3" 225 x 4" 250 x 1" 250 x 1¼ 250 x 1½ 250 x 2" 250 x 3" 250 x 4" 315 x 1" 315 x 1¼ 315 x 1½ 315 x 2" 315 x 3" 315 x 4" O-Ring Size Weight Mass Grams
12 INCLEDON BLOEMFONTEIN Tel: BURGERSFORT Tel: GERMISTON Tel: KATHU Tel: KLERKSDORP Tel: LEPHALALE Tel: NELSPRUIT Tel: NORTHRIDING Tel: POLOKWANE Tel: PRETORIA Tel: SECUNDA Tel: WELKOM Tel: DURBAN Tel: DPI TRADING (Western Cape) CAPE TOWN Tel: GEORGE Tel: EAST LONDON Tel: PORT ELIZABETH Tel:
PLASTICA ALFA. Compression. Fittings. Pipe Saddles. For use. with. Polyethylene. Pipe. DPI Trading PRODUCT CATALOGUE PROUDLY IMPORTED BY
Compression PRODUCT CATALOGUE Fittings & Pipe Saddles For use with Polyethylene Pipe DPI Trading PROUDLY IMPORTED BY www.dpitrading.co.za www.incledon.co.za Technical Information Body: black polypropylene
IRECO FITTINGS IN BRASS SERIES - FOR PLASTIC PIPES FOR ISO PIPES FROM DIAMETER 20 TO 63
11/17 0800 DESCRIPTION The IRECO 800 series compression fittings with EPDM elastomer ring washer have been conceived, designed and manufactured for plastic piping used for transporting fluids under pressure.
PP Compression Fittings
PP Compression Fittings T H E C O M P A N Y On October 1st 2008, two of our companies, NUPI S.p.A. and GECO System S.p.A. - both founded more than 30 years ago - merged to become NUPIGECO S.p.A. "The height
Fittings and valves high pressure Connecto Plus Group 0801
Fittings and valves high pressure Connecto Plus Group 0801 COMPRESSION FITTINGS CONNECTO PLUS The Connecto Plus compression fittings line has been designed for the conveyance of fluids at high pressures
NEISCO. Neisco For Modern Waters Systems Production NEISCO
NEISCO Head Office: Borg El Mohandessen 4/51, Post code 11371Rabaa El adawia Nasr City - Cairo - Egypt Tel.: (+202) 240 18412-226 05695-240 51884 Fax: (+202) 22629718 Factory: Badr industrial City zone
PRICE LIST E4.13 MAGNUM 3G SYSTEM OF COMPRESSION FITTINGS AND CLAMP SADDLES
PRICE LIST E4.13 MAGNUM 3G SYSTEM OF COMPRESSION FITTINGS AND CLAMP SADDLES Since 1954 FIP produces injection moulded valves and fittings in thermoplastic materials for pressure pipeline systems thus
4500 Linea / Line FIELDS OF APPLICATION SYSTEM
4500 Linea - Line Raccordi a compressione con anello tagliato per tubo in polietilene ad alta e bassa densità. Compression fittings for low and high density polyethylene pipe with brass ring 4500 Linea
AVE WATER FOR GREEN FUTURE A B O U T U S HISTORY PRODUCTS AND SERVICES.
HISTORY A B O U T U S Skala family started the private business in 99. The founder of the company was Mr. Mihalj Skala. Generation after generation has continued to develop and improve the family tradition
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
Technical handbook Compression Fittings and Clamp Saddles
Technical hanbook 2009 Compression Fittings an Clamp Sales 1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut:
Poly16 Plus Compression Fittings Technical information
1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut: polypropylene copolymer stabilize (PP-B) with Master Batches
MARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
upvc PRESSURE AND COMPRESSION FITTINGS
upvc PRESSURE AND COMPRESSION FITTINGS Company Profile Proplastics is the leading supplier of world class plastic pipe systems for water and sewer reticulation in Southern Africa. Established in 1965,
VERSION 2. PVC FITTINGS & VALVES Technical Catalogue
VERSION 2 PVC FITTINGS & VALVES Technical Catalogue INTRODUCTION Plasson s innovative products revolutionized the way of connecting polyethylene pipes in the 1960 s. We started with fittings for agricultural
Carbon Steel. Stainless Steel. Valves. Applications: Industrial Petrochemical Process Plants Mining INDUSTRIAL VALVES PRODUCT CATALOGUE VALVES
INDUSTRIAL PRODUCT CATALOGUE Carbon Steel & Stainless Steel Valves Applications: Industrial Petrochemical Process Plants Mining DPI Trading www.dpitrading.co.za www.incledon.co.za FLOATING BALL FLOATING
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
VERSION 3. PVC FITTINGS & VALVES Technical Catalogue
VERSION 3 PVC FITTINGS & VALVES Technical Catalogue INTRODUCTION Plasson s innovative products revolutionized the way of connecting polyethylene pipes in the 1960 s. We started with fittings for agricultural
Super-rapid fittings Series X6000 in Stainless Steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in Stainless Steel 316L CATALOGUE > s 2012 Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2),
MODERN PLASTIC INDUSTRY L.L.C. PP COMPRESSION FITTINGS. Reliability, Quality and Value
MODERN PLASTIC INDUSTRY L.L.C. PP COMPRESSION FITTINGS Reliability, Quality and Value P R O F I L E Introduction Modern Plastic Industry LLC is a part of AL SHIRAWI GROUP OF COMPANIES which is one of the
JULY Polyethylene Piping Systems.
JULY 205 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
.09 3.1.0 1.1 1.44 1.71 1.73 1 5 1-70-3.70 1 HOSE ADAPTORS 0.58 0.1 0.70 0.73 0.83 0.85 0.95 0.93 1.03 1.41 1.1 1.71 1.98.0..3.0 3.08 1.3 1.54 0.89 0.91 1.07 1.4 1.7 1.9 1.17.31.30 0.9 0.37 0.7 0.89 1.18
Air Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
PRICES VALID FROM 1 August to 30 September 2014
Our Original Quality Brake Components Continuously Improves Customer Confidence Since 1992 GW Grahamstown Now Open! Quality Replacement Parts Suitable for all German Vehicles, Chevrolet and Toyota Models
THOMAS. Large Diameter Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Large Diameter Couplings Dedicated Connections For Rigid Large Diameter Pipework F1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED
industrial and economy pipe fittings PVC-U Solvent Cement WELD-ON REGULAR 719 Size Code Price 500ml tin
pvcu fittings mm sizes industrial and economy pipe fittings fittings mm sizes 68 Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings
d z z Le Le Elbow d L mm equiv inch 110 Le r 1) z 5 2 5 5 8 2 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
Praher S4 Ball Valve. manual valves. Praher Type S4 Ball Valve. Materials. Size. Pressure Rating. Features. Connections.
Praher S4 Ball Valve Praher Type S4 Ball Valve Descripti: In-line double uni ball valve with lockable handle Mounting: In any positi Maximum Fluid Pressure at 20 C: s 16mm to 7mm - 10bar; s 90mm to 110mm
Polish Institute for Building Technology. Technical approval issued by ITB No. AT /2011
Polish Institute for Building Technology Technical approval issued by ITB No. AT-15-8792/2011 Polypropylene (PP) compression fittings for polyethylene (PE) pipes WARSZAWA This Technical Approval was prepared
HAWLE - ZAK System. the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS.
HAWLE - System the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS. HAWLE - System the threadless, restraint jointing system for service connections integrated in Pipe Saddles, Service
HDPE Pipe. Catalogue
HDPE Pipe Catalogue HDPE PIPE Catalogue Overview Proplastics is a leading supplier of world class plastic pipe systems for water and sewer reticulation to Southern Africa. Proplastics produces a wide range
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 1507-18 mm - pad mounting body M1 connection x/ - 5/ - 5/ Series 50 ISO 1507- (18 mm) FEATURES M1 connection with electrical
Y o u r V a l u e P a r t n e r THOMAS. Weholite LP Couplings
Y o u r V a l u e P a r t n e r THOMAS Weholite LP Couplings Marley Pipe Systems Your Value Partner Marley Pipe Systems is the leading manufacturer and supplier of plastic pipe systems, offering the full
COPRAX RANGE PIPES AND FITTINGS IN POLYPROPYLENE COP-RANDOM COPRAX. Comércio e Indústria do Plástico, Lda. AV. 16 DE MAIO Z.I.
COPRAX Comércio e Indústria do Plástico, Lda. AV. 16 DE MAIO Z.I. OVAR 3880 102 OVAR - PORTUGAL T +351 256 579 480 F +351 256 579 489 export@coprax.com www.coprax.com PIPES AND FITTINGS IN POLYPROPYLENE
FE DN PVC-U. Butterfly valve
FE DN 40 200 PVC-U Butterfly valve FE DN 40 200 The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with a customisable Labelling
ATLANTIC PLASTICS is a company of. Gunmetal Service Fittings Data Sheet
ATLANTIC PLASTICS is a company of Gunmetal Service Fittings Data Sheet EBCO - Service Connections The EBCO range of gunmetal service fittings covers a variety of pipe material and sizes. Fittings for steel
800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8.
Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request S 800 m max. operating pressure for 1.4301 for 1.4571 x s PB -No
Factory address: Mola sadra st., Abooreyhan st Eshtehard Industrial Town, TEHRAN/ IRAN
z d Le mm equiv inch Le r 1) z z Le L 110 5 2 5 5 8 2 Elbow d 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
TEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
CATALOGUE Edition 6 1
CATALOGUE Edition 6 1 CONTENTS ODF CATALOGUE EDITION 6 PISTON PUMPS 4 AND 3 BOLT BENT AXIS PISTON PUMPS 40/30 SERIES GEAR PUMPS TANDEM GEAR PUMPS VANE PUMPS ADAPTORS, COUPLINGS, FLANGES TIPPING VALVES
in stainless steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in stainless steel 316L Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2), BSPT (R1/8, R1/, R3/8,
PP-R PIPES AND FITTINGS. Pilsatherm Pipes and Fittings Technical Catalogue. Wavin TR Plastik San. A.Ş.
PP-R PIPES AND FITTINGS Pilsatherm Pipes and Fittings Technical Catalogue Wavin TR Plastik San. A.Ş. 1 JUNE 2014 2 FORE WORD Pilsa Plastic Products Inc. started production in 1971 and has always been a
4 01 ta l o g u e 2 Ca P R i c e L I S T
Catalogue 2014 The Complete Product Range The compression fittings: Our Gebo Quick the universal compression fittings are available for steel pipes of 1/2" to 2" diameter, for black steel pipes of 20 mm
DKD/CP DN PVC-U. Direct action pneumatically actuated 2-way diaphragm valve
DKD/CP DN 15 65 PVC-U Direct action pneumatically actuated 2-way diaphragm valve DKD/CP DN 15 65 The DKD/CP diaphragm valve is particularly suitable for shutting off very dirty and/or highly viscous fluids.
THOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Premier Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe J1 Unifit Premier Series Application Locally
Mur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows
Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These
ACCESSORIES CATALOGUE EDITION 01
ACCESSORIES CATALOGUE EDITION 01 BRANCHES PORT ELIZABETH 200 Kempston Road, Sidwell, Port Elizabeth 6001 P.O. Box 3503, North End, Port Elizabeth 6056 Tel: (041) 451-5641 Fax: (041) 451-5650 epsales.pel@actom.co.za
Silver Line (14) SANS &
ilver ine (14) N 14236 & 1808-44 PRODUCT CTOGU Compression Fittins PN10 IO 9001:2000 certifie Water Reticulation & Irriation DPI Train Global Presence PROUDY IMPORTD BY ocal Commitment www.pitrain.co.za
2014 CATALOGUE INDIA
2014 CATALOGUE INDIA The Evolution Enolgas Bonomi was founded in 1960 as a family business, specializing in manufacturing of brass valves. Enolgas Bonomi today is a structured group with its specific divisions
Vacuum Filters. Catalogue Edition 2
Vacuum Filters Catalogue Edition 2 INLINE VACUUM FILTERS Vacuforce plastic in-line filters provide easy monitoring, economy and safety. These shatterproof filters are 100% airtight, can withstand high
Miniature Fittings Stainless Steel 316. Hose nipple. Barb Configuration for easy insertion into the tube Holds the tube tightly.
Miniature Fittings Stainless Steel 316 Series MS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose nipple
PUSH FITTINGS INSTA INST LLAT ALLA ION TION AND AND COMPONENTS COMPONENTS
PUSH FITTINGS INSTALLATION AND COMPONENTS SUMMARY 1. USE 1. TECHNICAL DATA 2. INSTALLATION WITH SYNTHETIC PIPES 3. INSTALLATION WITH COPPER PIPES 5. COMPONENTS 9. GUARANTEE June 2010 0135EN ISO 9001 0006/6
PIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
THOMAS. Unifit Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe H1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED BELLVILLE
Camlock Couplings Also referred to as Kamlock Couplings Quick Release Couplings
Camlock Couplings Also referred to as Kamlock Couplings Quick Release Couplings HCD Camlocks manufactured to NATO specifications Available in: Aluminum Sizes: 13-19-25-32-38-51-64-76-102-125-152-203 Polypropylene
SECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
Dual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
Low Pressure Series KL
Low Pressure 35 Nom. Type Material Max. static working C v value Cross Page bore pressure at 20 C both sides one side both sides one side section [bar] [psi] self sealing self sealing [mm 2 ] 6 KL-006
Filtration Ft-Line 34. Ck-Line 38. Cp-Series 42. FilterMax 46. Cintropur filtration 51. Cartridge housings
0. 20. Ft-Line 34. Ck-Line 38. Cp-Series 42. FilterMax 46. Cintropur filtration 5. Cartridge housings 57. Filter cartridges 6. Containers 62. Big cartridge housings 63. Big filter cartridges 9 Ft-Line
Risers/Saddles. NEW - 2 Poly Risers. All handline risers built at B. A. Fischer in Boise, ID. Black Poly Coated Orange.
Risers/Saddles NEW - 2 Poly Risers 2 3 4 All handline risers built at B. A. Fischer in Boise, ID Black Poly Coated Orange BAFSCO Auto Valve Openers Saddles and Tees 2178 Centurion Place Boise, ID 83709
PRICE LIST WEFATHERM. 1 November PP-R Piping System WEFATHERM PIPE LEADERS IN PIPELINE TECHNOLOGY. Asmuss Plastic Systems Limited
143 PRICE LIST 1 November 2016 The Wefatherm PP-R System is ideally suited for use in a wide range of applications including hot and cold water systems, industrial heating and cooling, air-conditioning
Turbotron // VTH15, VTM15, VTP15, VTI15
1 Flow Measuring Turbine flow sensors Turbotron // VTH15, VTM15, VTP15, VTI15 VTH15 BEST SELLER VTM15 Your advantages Series VTH15 VTM15 Cost optimized version For medium temperature up to 120 C Type VTH15
Precision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
KM-1600MRH KM-1600MRH3
NO. 71188 ISSUED: JULY 25, 2001 REVISED: APR. 22, 1999 HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-1600MRH KM-1600MRH3 S LIST KM-1600MRH July 2001 KM-1600MRH3 July 2001 2 MATERIAL ABBREVIATIONS ALUMINUM
FLOW SWITCHES AND COMBINATION CONTROLS
6 ULTIMHEAT FLOW SWITCHES AND COMBINATION CONTROLS The professional solution: an extended, rational, and consistent range of products Technical catalogue for R&D department Edition 28/05/2013 E-Mail :
Visual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page
NEWS 3 2013 Visual index Stainless Stainless 2012 NEW PRODUCTS Stainless NEWS Pin with weldable fastening button Stainless Panel fastening p.n1 button Stainless p.n2 Aluminium hinge external fastening
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
TURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
DK AND DK/CP DN 15 65
DK AND DK/CP DN 15 65 New diaphragm valves with maximised flow rate available in manual or pneumatically actuated versions. Manual versions are equipped with the innovative DIALOCK lockable handwheel.
TECHNICAL CATALOGUE AUTOMATIC AIR-VENT VALVES
TECHNICAL CATALOGUE AIR-VENT VALVES TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
FK DN PVC-U Butterfly valve
.co.th FK DN 40 300 PVC-U Butterfly valve FK DN 40 300 The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring
SUPERSEDES ABS-C0811/AUG.
ABS-C0612/R JUNE 2012 SUPERSEDES ABS-C0811/AUG. 2011 SANITARY TEE REDUCING TEE TEE - Left Side Inlet 600007 1 1/4" 0 62852 60000 5 50 4,800 15.41 600015 1 1/2" 0 62852 60001 2 90 2,880 8.27 600023 2"
standard and industrial pipe fittings
fittings mm sizes standard and industrial pipe fittings Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings from 6 bars to 16 bars,
Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-700MAH KMD-700MWH KMD-700MRH PARTS LIST
Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-700MAH KMD-700MWH KMD-700MRH S LIST ITEM #: 71221 ISSUED: MAY 29, 2003 REVISED: JUNE 30, 2003 KMD-700MAH MAY, 2003 KMD-700MWH MAY, 2003 KMD-700MRH
ELSTER KENT Non-Metalic Products. Meters, Meterboxes & Accessories made from Engineering Plastics
ELSTER KENT Non-Metalic Products Meters, es & Accessories made from Engineering Plastics 1 Accuracy and long-life stem from engineering excellence Locking Device Reading Slot Elster Kent range of non-metallic
Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-900MAH KMD-900MWH KMD-900MRH PARTS LIST
Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-900MAH KMD-900MWH KMD-900MRH S LIST ITEM #: 71222 ISSUED: JUNE 2, 2003 REVISED: OCT. 21, 2003 KMD-900MAH N-0 MAY, 2003 N-1 SEPT., 2003 KMD-900MWH
Hoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Models KM-320MAH KM-320MWH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71250 Issued: 2-13-2006 Revised: 2-20-2006 CONTENTS Auxiliary
ADULTS HOT FLAVOURED MILK DRINKS- PAST 7 DAYS Page 267
ADULTS - PAST 7 DAYS Page 267 COMMUNITY PROVINCE TOTAL 250 000 40 000-500- LESS THAN W. CAPE N. CAPE F.STATE E. CAPE OR MORE 249 999 39 999 500 12408 12408 6168 6168 2626 2626 1604 1604 2010 2010 1674
THOMAFLUID - Handbook IV
Reichelt Chemietechnik GmbH + Co. - Handbook IV lndustrial Connectors of Metal Tubing Squeeze Connections of Metal for Pneumatics Quick-Disconnect Couplings of Plastics and Metal Cocks and Valves of Plastics
KM-1300MAH KM-1300MWH KM-1300MRH
71187 ISSUED: JUNE 24, 2001 REVISED: JULY 29, 2003 TM HOSHIZAKI MODULAR CRESCENT CUBER KM-1300MAH KM-1300MWH KM-1300MRH S LIST KM-1300MAH April 2001 KM-1300MWH June 2001 KM-1300MRH April 2001 2 MATERIAL
ADULT FEMALES SANITARY PROTECTION TAMPONS - PAST 4 WEEKS Page 1852
ADULT FEMALES TAMPONS - PAST 4 WEEKS Page 1852 COMMUNITY PROVINCE TOTAL 250 000 40 000-500- LESS THAN W. CAPE N. CAPE F.STATE E. CAPE OR MORE 249 999 39 999 500 6195 6195 3089 3089 1317 1317 784 784 1005
ADULTS HAND-HELD ICE-CREAMS - PAST 7 DAYS Page 141
ADULTS - PAST 7 DAYS Page 141 COMMUNITY PROVINCE TOTAL 250 000 40 000-500- LESS THAN W. CAPE N. CAPE F.STATE E. CAPE OR MORE 249 999 39 999 500 12408 12408 6168 6168 2626 2626 1604 1604 2010 2010 1674
Valves, Hydrants & Fittings. Water Valves Gate Valves / Fire Hydrants / Check Valves / Air Valves / Accessories
Valves, Hydrants & Fittings AVK Water Valves 126-134 Gate Valves / Fire Hydrants / Check Valves / Air Valves / Accessories Gas Valves 135-143 Gate Valves / Drilling Valves / Ball Valves / Accessories Water
Technical Manual. The connection you can trust. The connection you can trust.
U N IVERSA L TRA N SITIO N C OU P LI N G Technical Manual The connection you can trust. The connection you can trust. 16429_UTC_tech manual_ƒ.indd 1 6/11/06 10:55:33 PM Committed to sustainable development,
Hoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Models KMD-700MAH KMD-700MWH KMD-700MRH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71221 Issued: 5-29-2003 Revised: 1-9-2008 CONTENTS
ABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS.
ABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS www.bow-group.com dimension item Ctn Skid list price dimension item Ctn Skid list price SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
ISO-BSP FITTINGS PVC-U. Adaptor fittings
ISO-BSP FITTINGS PVC-U Adaptor fittings FITTINGS ISO-BSP Series of fittings designed for conveying fluids under pressure with threaded and solvent weld cold chemical jointing systems (solvent welding)
40 geothermal ground loop manifolds
40 geothermal ground loop manifolds GeoCal (key features listed left) This is the first thermoplastic, fully modular manifold system designed specifically for installations using ground source heat pumps.
POLYETHYLENE RIGID AND FLEXIBLE PIPES PRODUCT CATALOG
POLYETHYLENE RIGID AND FLEXIBLE PIPES PRODUCT CATALOG 2013 Products appearing in this catalogue may be covered by one or more of the following US Patent Nos. 7048010, 7588201 and other U.S. patents pending
Hoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Models KM-501MAH KM-501MWH KM-501MRH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71254 Issued: 5-26-2006 CONTENTS Auxiliary Codes...
KM-1300MAF KM-1300MWF KM-1300MRF
NO. 71164 ISSUED: JAN. 28, 2000 REVISED: JULY 29, 2003 HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-1300MAF KM-1300MWF KM-1300MRF (FINAL) PARTS LIST KM-1300MAF J-0 Aug., 1999 K-0 Dec., 1999 L-0 Dec., 2000
INSERTION Adaptor for analysis
INSERTION Adaptor for analysis Type can be combined with... Universal adaptor for type 8202 and 8222 ELEMENT s in pure, aggressive or contaminated liquids Adaptation into standard piping systems or conversion
DN 1/4" to 2" Threaded Female BSP -10 C C Max Pressure : Bars Specifications : Reduced bore High pressure Hydraulic type
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2" Threaded Female BSP -10 C + 100 C Max Pressure : 315 500 Bars Specifications : Reduced bore High pressure Hydraulic type Materials : Galvanized
VR DN PVC-U. Check valve
VR DN 10 100 PVC-U Check valve VR DN 10 100 The VR is an angle seat check valve with weighted PVC piston that allows the passage of fluid in one direction only CHECK VALVE Connection system for solvent
PVC FITTINGS & VALVES
PVC FITTINGS & VALVS Technical Catalogue Distributor of 1 Introuction Plasson s innovative proucts revolutionize the way of connecting polyethylene pipes in the 1960 s. We starte with fittings for agricultural
RAUFUSION PP-R PLUMBING SYSTEM. Safer. Smarter. More Convenient
RAUFUSION PP-R PLUMBING SYSTEM Safer. Smarter. More Convenient SAFER Engineered for your safety and well being Safety is critical when choosing a suitable plumbing system. REHAU RAUFUSION consists of a
ALLROUNDER 470 E. Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.
ALLROUNDER 470 E Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.2 oz MACHINE DIMENSIONS 470 E 51.24 33.44 max.16.34 4.72 80.71 83.62 15.75
Magnetic Sizes mm
CATALOGUE > Release 8.7 > Series CGB guided parallel grippers Series CGB guided parallel grippers Running out of stock Magnetic Sizes 6-20 - 25-32 mm»» Guided mechanism which allows high repeatability»»
HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-500MAH KM-500MWH KM-500MRH PARTS LIST
NO. 71185 ISSUED: JULY 17, 2001 REVISED: JAN. 24, 2003 HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-500MAH KM-500MWH KM-500MRH PARTS LIST KM-500MAH KM-500MWH L-0 April 2001 M-0 Dec. 2001 M-1 March 2002 M-2