Factory address: Mola sadra st., Abooreyhan st Eshtehard Industrial Town, TEHRAN/ IRAN
|
|
- Lizbeth Chambers
- 5 years ago
- Views:
Transcription
1
2 z d Le mm equiv inch Le r 1) z z Le L Elbow d 1 51/ ) r = 1,5 d
3 z d Le mm equiv inch Le r 1) z z / Le d Elbow ) r = 1,5 d
4 z Le mm d equiv inch Le r 1) z z Le / Elbow d ) r = 1,5 d
5 Le mm d equiv inch Le r 1) z r z Le 1 51/ z d Elbow ) r = 1,5 d
6 Tee mm d equiv inch Le L Z1 Z / ) ) ) These values are not covered by the DIN 963 norm Part 2
7 Tee90 mm equiv inch Le L z / )1 10 1) ) These values are not covered by the DIN 963 norm Part 2
8 Reducing 90º Tee Tee Red C mm d1 equiv inch d2 Le L Z1 Z a a /2 75 a a a a a Tee Red E a a a a a a a a a a a a a a a a 1 20
9 Nominal pressure 1 & 2.5 Nominal width (175) 2 0 () D1= Outside diameter of PE pipe Nominal pressure 1 and 2.5 Bolts D dg k Quantity Thread d2 Mating dimensions, See under nominal pressure DN= Nominal size of metal M M M M M D= Outside diameter of metal d6= Inside diameter of metal
10 Nominal pressure 6 Nominal width (175) 2 0 () Nominal pressure 6 Bolts D d k Quantity Thread d DN= Nominal size of metal No anges standardized D1= Outside diameter of PE pipe M10 M10 M10 M10 M10 M10 M M M M M M M M M M M M M M M M2 M2 M M M39 M39 M39 M5 M5 M5 M5 M5 M D = Outside diameter of metal d6= Inside diameter of metal
11 Nominal pressure 10 Nominal width Nominal pressure 10 Bolts D dg k Quantity Thread d2 Mating dimensions, See under nominal pressure Mating dimensions, ooo under n.p. Mating dimensions, ooo under n.p. Mating dimensions, See under nominal pressure 5 0 (175) M M M M M2 M2 M2 () M M M M39 M5 M M5 M M M M M 62 No anges standardized DN= Nominal size of metal D1= Outside diameter of PE pipe D= Outside diameter of metal d6= Inside diameter of metal
12 Nominal pressure Nominal width Nominal pressure Bolts D dg k Quantity Thread d2 Mating dimensions, See under nominal pressure M Mating dimensions, See under nominal n.p (175) 2 0 () M M M M M M2 M2 M2 M M M M39 M5 M5 M M M M No anges standardized DN= Nominal size of metal D1= Outside diameter of PE pipe D= Outside diameter of metal d6= Inside diameter of metal
13 Nominal pressure 25 Nominal width Nominal pressure 25 Bolts D dg k Quantity Thread d2 Mating dimensions, See under nominal pressure 5 0 (175) M M2 () M M M39 M M5 M M M M M M6 No anges standardized DN= Nominal size of metal D1= Outside diameter of PE pipe D= Outside diameter of metal d6= Inside diameter of metal
14 Concentric/Excentric Reducing Concentric Reducing mm d1 equiv inch d2 L1 L2 a b a a /2 75 a a a a a a a a a 3 a a Excentric Reducing 0 2 a 0 0 a a a 6 a a a a a a 1
15 r1 d d5 d1 d3 h1h2r2 z1 Short Stub End for PFCP Gasket (PE 100) Ext diam pipe d1 d3 d PN6 PN10 2) d5 PE 100 PN PN PN.5 PN6 PN10 3) h1 PN,5 PN PN h2 r1 r2 min. ) z ) ) ) ) 2 2 1) ) ) DIN 963 norm part ) The H1 values correspond to those of higher PN ) D5 consider average values, 1191 norm. ISO ) Z1 corresponds to Z1 min. Plus mm.
16 r1 d d5 d1 d3 h1h2r2 z1 Short Stub End for PFCP Gasket Ext diam pipe d1 d3 d 2) d5 PE 63 PN 3,2 PN PN 6 PN 10 PN,5 PN PN 3,2 PN 3) h1 PN 6 PN 10 PN,5 PN h2 r1 r2 min. ) Z1 27 5,1,1 1, ,1,1 19,1 17, ) 6 27,1 25,9 2,, ,1 35,1,2,5, ,2,0, 38,2 35, ,2 57,8 55,5,8,0, ,3 69,1 66,1,7 57,3 53, ) 1 8, 82,9 79,5 72,8 68,7 6, ,1 101, 96,9 89,0 8,0 78, ,2 1,2 110,3 101,0 95,5 88, , 9,0 3,5 113,3 106,9 98, ,2 17, 11,2 9, 1,5 1, ) 8 2 9,0 6,0 8,9 1,9 1,7 6, ,5,3 176,3 1,9 1,7 1, ,2 7,6 198,5 1,1 1,7 8, ,6 2,5 2,6 1,3 9,9 176, ,8 258,2 27,1 5,5 2,5 197, ,6 290, 277,2 253,6 239,1 1, ,1 7,3 3, 5,8 9,3 2, ,3 8,9 351,9 2,0 3,5 1, ) 2 1) 55, 1,3 396,1 2,2 31,5 3, ,,3,1 2,5 379, ) 6,7 5,5 92,8, ,5 579,9 55, 7, ,3 653, 62, ,8 7,3, , 8,5 792, ,2 9,5 880, ,3 110, ) DIN 963 norm part. 3)The H1 values correspond to those of higher PN. 2) D5 considers average values, ISO 1191 norm. ) Z1 corresponds to Z1 min. Plus mm.
17
18
d z z Le Le Elbow d L mm equiv inch 110 Le r 1) z 5 2 5 5 8 2 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
More informationUltra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
More informationTwo-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
More informationAir Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
More informationWafer Check Valve Type 012 PVC-U
novel valve design with conical sealing surface for highest requirements and long service life body disc reinforced EPDM / FPM gaskets DN40 / d50 / 1½'' DN200 / d225 / 8'' operating pressure max. 10 bar
More informationTwo-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
More informationTwo-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationGRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.
GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part
More informationHDPE PIPE SYSTEMS PRODUCT CATALOGUE.
HDPE PIPE SYSTEMS PRODUCT CATALOGUE www.acu-tech.com.au This is to certify that: The Trustee for The Morren Family Trust ABN 52 394 633 042 Trading As Acu-Tech Piping Systems 119 Kelvin Road Maddington
More informationAdvanced PE Single Wall Piping System
Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply
More informationFITTINGS PP-H. Fittings, metric series ISO-UNI
FITTINGS for socket welding PP-H Fittings, metric series ISO-UNI FITTINGS for socket welding Series of fittings designed for conveying fluids under pressure with a hot weld connection system (socket welding).
More informationPPN Piping System. Cost Effective Purity
PPN Piping Sytem Cot Effective Purity 45 - Specification PolyPure Natural Polypropylene (PPn) High Purity Piping Sytem REV:HP0512PN Material: ASTM D4101 Group 2, Cla 1 natural polypropylene random copolymer
More informationBR 14p - PSA. High-Performance Control and Shut-off Butterfly Valve. Application:
High-Performance Control and Shut-off Butterfly Valve BR 14p - PSA Application: Pressure swing adsorption (PSA) is a method used to separate a gas from a gas mixture as well as to dry or clean gases. The
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IS0 7483 First edition 1991-10-01 --- ---- -.----.----_-- -_ ----- - - Dimensions of gaskets for use with flanges to IS0 7005 Dimensions des joints B utiliser avec les brides de
More informationstandard and industrial pipe fittings
fittings mm sizes standard and industrial pipe fittings Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings from 6 bars to 16 bars,
More informationFITTINGS PVDF. Fittings, metric series ISO-UNI
FITTINGS for socket welding PVDF Fittings, metric series ISO-UNI FITTINGS for socket welding Series of fittings designed for conveying fluids under pressure with a hot weld connection system (socket welding)
More informationGEMO. Fittings DIN11852/DIN11850 Weld to the DIN11850 and DIN11852 tubes 1.2 TUBES AND FITTINGS
UBES AND FIINGS Fittings DIN11852/DIN11850 Weld to the DIN11850 and DIN11852 tubes All bends, tees, and reducers are according to DIN11850/ DIN11852 EACH FIINGS PACKAGING HAS A BACODE 27 UBES AND FIINGS
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationPIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
More informationindustrial and economy pipe fittings PVC-U Solvent Cement WELD-ON REGULAR 719 Size Code Price 500ml tin
pvcu fittings mm sizes industrial and economy pipe fittings fittings mm sizes 68 Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings
More information3 way ball valve S4 hand operated
General: Symbolfoto Material: PVC-U / PP / PVDF Sealing material: EPDM / FPM Ball seating joint: PTFE Ball: T- oder L-Bohrung Dimensions: DN0 (DN5 / d6 / d/8 ) DN5 d0 d/ DN0 (DN5 / d5 / d/4 ) DN5 d d DN
More informationAWH ARMATUREN- WERK HALLE GMBH. Thermodynamic steam trap. Thermodynamic steam trap. Thermodynamic steam trap PN40. Thermodynamic steam trap PN63
TD PN40 - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig. 640/641...3) - with butt weld ends (Fig. 640/641...4) Forged steel High temperature steel
More informationHYGIENIC TUBE & PROCESS COMPONENTS DIN 11866
HYGIENIC TUBE & PROCESS COMPONENTS DIN 11866 DIN 11866 This norm range DIN 11866, DIN 11865 and DIN 11864 are linked to each other. The DIN 11866 is for example also mentioned in the other norms in the
More informationHawle Haku PE Pipe Saddle
Hawle Haku PE Pipe Saddle Scan for more information Technical Guide W9.1 Specifically designed as a PE mechanical connection solution. Suitable for PE pipes of all pressure ratings up to PN 16. DN40-360.
More informationIRECO FITTINGS IN BRASS SERIES - FOR PLASTIC PIPES FOR ISO PIPES FROM DIAMETER 20 TO 63
11/17 0800 DESCRIPTION The IRECO 800 series compression fittings with EPDM elastomer ring washer have been conceived, designed and manufactured for plastic piping used for transporting fluids under pressure.
More informationPressure Pipes & Fittings
Pressure Pipes & Fittings Description: UPVC and CPVC pipes for hot and cold water supply under pressure. Range: Metric series fromø16 up toø315 mm, Imperial series fromø1/2" up toø1". Pressure Rating:
More informationWafer check valve RSK 500
Wafer check valve RSK 00 Advantage corrosion resistant simple installation as a wafer type flange fitting centring of the valve by the housing diameter body with O-ring, no additional flange s required
More informationUSING EXABOND TECHNOLOGY LINER PIPE
LINER PIPE Inside Diameter Liner Thickness DN - Nominal diameter S 1 - Liner wall thickness d 2 - Outside diameter of liner Liner material density for PVC: 1.38g/cm 3 Liner material density for PVC-C:
More informationCompany Overview Presentation CONTACT US
Company Overview Presentation CONTACT US 800-231- 1212 WWW.CPCHEM.COM Company Founded in 2000 Divisions & Affiliates About Us Invented HDPE in 1951 Largest producer of Polyethylene piping products in North
More informationCompressed air counter DN
Data sheet -6447 Compressed air counter DN 65-250, Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 2½ -10 ) Exchangeable fitting: Probe removal under pressure
More informationHygienic Butterfly Valve VZFA Product range overview
Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /
More informationNOTE: Please ask James Hardie on for delivery timeframes and terms and conditions. STORMWATER PIPES & FITTINGS
Description James Hardie manufactures an extensive range of fittings which are intended to provide maximum flexibility in the design and installation of stormwater drainage systems. Application As an integral
More informationVERSION 2. PVC FITTINGS & VALVES Technical Catalogue
VERSION 2 PVC FITTINGS & VALVES Technical Catalogue INTRODUCTION Plasson s innovative products revolutionized the way of connecting polyethylene pipes in the 1960 s. We started with fittings for agricultural
More informationHAWLE - ZAK System. the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS.
HAWLE - System the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS. HAWLE - System the threadless, restraint jointing system for service connections integrated in Pipe Saddles, Service
More informationSITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationOperating Instructions
Operating Instructions ERHARD Tilting-Disc Check Valves with weight-loaded lever 1 Safety Aspects 2 Description of Product and Range of Application 3 Design Features Technical Data 4 Performance and Mode
More informationPLASTICA ALFA. Compression. Fittings. Pipe Saddles. For use. with. Polyethylene. Pipe PRODUCT CATALOGUE PROUDLY IMPORTED BY.
Compression PRODUCT CATALOGUE Fittings & Pipe Saddles For use with Polyethylene Pipe DPI Trading PROUDLY IMPORTED BY www.dpitrading.co.za www.incledon.co.za Technical Information Body: black polypropylene
More informationABS Pipe metric system Plain PN10
S Pipe metric system Plain PN10 t (mean) Da (min) Size Thickness Weight Length ode t Da mm kg/m m 16 1.5 0.07 3 11 565 305 20 1.6 0.10 3 11 565 306 25 1.9 0.14 3 11 565 307 35 2.1 0.21 3 11 565 308 16
More informationButtweld. Pipe Fittings NOTE: ANSI B16.9, MSS-SP-43
Buttweld Pipe Fittings NOTE: ANSI B16.9, MSS-SP-43 Buttweld fittings in duplex and other special alloys are available from stock and throughout our worldwide network of suppliers. and eccentric reducers,
More informationBOAX-B Mat E. Type Series Booklet
Butterfly Valve with Electric Actuator BOAX-B Mat E PS 16 bar: DN 40 to 200 PS 10 bar: DN 250 and 300 Design to EN 593 and ISO 10631 Type Series Booklet Legal information/copyright Type Series Booklet
More informationBUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
More informationVariable Area Flowmeters Ori-Flowrator TM Meters
Data Sheet (US) Variable Area Flowmeters Ori-Flowrator TM Meters 10B4000 Low installation cost Linear indication over 12-1/2 to 1 flow range Inexpensive method of measuring large flow rates in direct flow
More informationPush-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented
Push-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented PE-100 / PVC-U pull-out resistant long type Push-Fit Transition Coupling for PE-100 and PVC-U water pipes up to 16 bar d90
More informationButt Welding Fittings ASME Standards
18 Butt Welding Fittings ASME Standards Standard Grades according ASTM A / ASME SA403, 304/L and 316/L (dual marked and certified), ASME B16.9, annealed and quenched, bevelled ends to ASME B16.25, hardness
More informationGrooved Butterfly Valves
Grooved Butterfly Valves Design Rating: PN10, PN16 Design: UNE EN 539 Grooving dimensions: ANSI/ AWWA C 606 97 Face to face: MSS SP 67 Piping assembling: ANSI B3610, ISO 4200, DIN 2448, BS 1387, BS 3600
More informationRotary Plug Valve BR 23e
PTFE-lined Rotary Plug Valve BR 23e Application: PTFE-lined rotary plug valve for aggressive media, especially due to high demands in chemical plants: Nominal diameter: DN 25, DN 50, DN 80 and NPS1, 2,
More informationIGATEC - Standard - Swivel Joints
IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International
More informationPiping Material Specification - Piping class : CS101
Piping Material Specification - Piping class : CS101 SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 150#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE NOMINAL CORROSION ALLOWANCE
More informationIntroduction. Operation FTG 600
Introduction FTG 600 impurity filters are used in all situations that require the filtration of natural gases (gas regulating and metering stations, delivery stations) and have the role of retaining the
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationANNEX 2. Scope of Works 1.0. Introduction. The United. joint pipes and lengths, iv items. and testing. all tests and 2.0.
ANNEX 2 Pre Shipment Inspectionn and Testing of Ductile Iron Pipes Scope of Works 1.0 Introduction The United Nation intends to procure ductile iron pipes, fittings and valves from China and Italy. The
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The
More informationBall valve C 100 multi-part, high k v value, high stability
Ball valve C 00 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable and ball
More informationForged steel High temperature steel Stainless steel Fig. 640/641 (Y) Page 2. High temperature steel Fig. 640/641 (Y) Page 6
Thermodynamic steam trap CONA TD Thermodynamic steam trap Thermodynamic steam trap PN40 - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig. 640/641...3)
More information2-port ball valves with flanged connection, PN25
s 4 120 ACVATIX 2-port ball valves with flanged connection, PN25 VAF51.. Gray cast iron EN-GJL-250 (HT250) valve body DN 65...150 k vs 63...360 m 3 /h Angle of rotation 90 Flange connection to ISO 7005-2
More informationDimensional Data Nesting Chart Earthwool
Nesting Chart CI-PE-NC 12-1 Dimensional Data Nesting Chart Earthwool 1000 Insulation 22 Dimensional Data Nesting Chart Insulation O.D. Single Layer Dimensional Data ½" 1" 1½" 2" 2½" 3" 3½" 4" 4½" " 6"
More information800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8.
Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request S 800 m max. operating pressure for 1.4301 for 1.4571 x s PB -No
More information3- and 4-Way Ball Valves KH3/KH4
3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an
More informationModular valve block MVB 100/200
Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution
More informationHDPE Pipe. Catalogue
HDPE Pipe Catalogue HDPE PIPE Catalogue Overview Proplastics is a leading supplier of world class plastic pipe systems for water and sewer reticulation to Southern Africa. Proplastics produces a wide range
More informationCONTROL BALL VALVES NPS 6 28 Class
CONTROL BALL VALVES NPS 6 28 Class - 900 APPLICATION Control Ball Valves are designed to control working medium parameters (pressure, flowrate) by throttling flow at pipelines. Depending on their application
More informationBR 11e Centric Control and Shut-off Butterfly Valve
BR 11e Centric Control and Shut-off Butterfly Valve Application: Tight-closing, centric control and shut-off butterfl y control valve with EPDM lining. Suitable for solids, liquids and gases: Valve sizes
More informationPlain Ended Welding Fittings BS 4825 Part 2
Plain Ended Welding Fittings BS 4825 Part 2 Alchem offer a wide range of plain ended weld fittings to suit both hygienic and pharmaceutical applications. These include bends, tees, and reducers, both concentric
More informationNAF-Setball ball sector valves for MC-pulp DN , PN 16-40, ANSI Class
NAF-Setball ball sector valves for MC-pulp DN 80-300, PN 16-40, ANSI Class 150-300 Fk 41.54(1)GB 08.12 Primary characteristics NAF-Setball for MC-pulp is a ball sector valve with metalto-metal seating
More informationBall valve C 16. Nominal size DN Nominal size 2 6 Nominal pressure PN 6 10 bar.
Ball valve C 16 Nominal size DN 50 150 Nominal size 2 6 Nominal pressure PN 6 10 bar Features Special ball valve with fully encapsulated valve ball extremely low clearance volume high actuation reliability
More informationSTRAUB-PLAST-PRO Technical Manual
STRAU-PLAST-PRO Technical Manual Contents STRAU-PLAST-PRO 3 Properties 3 Example 3 The full set 4 components 5 Conntectors 5 Pipe dimensions and tolerances 5 straub-plast-pro l Coupler 6 straub-plast-pro
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More informationBall Valve C 200. Stem PVC-U PVDF PP, fiberglass-reinforced. Ball PVC-U PP PVDF. Ball Seat PTFE. Application chemical and industrial plants
Ball Valve C 00 Benefits Highend industrial valve Flexible toolbox with a broad range of product varieties Reliable material combination for safe handling of critical media Newly designed ergonomic handle
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
More informationNSF/ANSI 61 Drinking Water System Components Health Effects
The Public Health and Safety Organization NSF Product and Service Listings These NSF Official Listings are current as of Thursday, January 08, 2015 at 12:15 a.m. Eastern Time. Please contact NSF International
More informationMaterials: Parts of the pump in contact with the liquid are manufactured from the following standard
Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They
More informationstrana / page
Sadržaj / Content: Čelične bešavne cevi / Seamless steel pipes Čelične šavne cevi / Welded steel pipes Sprinkler cevi / Sprinkler pipes Cevni lukovi / Elbows Koncentrične redukcije / Reducers concentric
More informationStrainer PN 25/40 DN
Type series booklet 7127.1/9-10 NORI 40 Strainer with drain plug flanged or with butt weld ends Type FSL Type FSS PN 25/40 DN 15-300 Fields of Application In heat transfer plants, industrial plants, building
More informationPNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
More informationPRICE LIST WEFATHERM. 1 November PP-R Piping System WEFATHERM PIPE LEADERS IN PIPELINE TECHNOLOGY. Asmuss Plastic Systems Limited
143 PRICE LIST 1 November 2016 The Wefatherm PP-R System is ideally suited for use in a wide range of applications including hot and cold water systems, industrial heating and cooling, air-conditioning
More informationElectrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
More informationBondstrand 2425 Glassfiber Reinforced Epoxy (GRE) pipe systems for Marine and Offshore services for 25 bar pressure
Bondstrand 2425 Glassfiber Reinforced Epoxy (GRE) pipe systems for Marine and Offshore services for 25 bar pressure Uses and applications Ballast water Drilling muds Saltwater/seawater Cassions Fresh water
More informationHaving fully welded bodies, the valves meet the requirements for valves used in hot water systems thus offering a high degree of security.
Ball valves Description The valves are ON/OFF valves. JIP ball valves have been specially designed for district heating systems and other hot water systems, in which the water has been treated in order
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationEarthwool 1000 Pipe Insulation
Nesting Chart CI-PE-NC 12-1 Earthwool 1000 Pipe Insulation Dimensional Data Nesting Chart Single Layer Insulation O.D. Single Layer Dimensional Data Pipe Size ½" 1" 1½" 2" 2½" 3" 3½" 4" 4½" " 6" ½" 0.840"
More informationUNITED BRAND FITTINGS
FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x
More informationCONDA-VRC Type Series Booklet
Pressure Reducing Valve PN 16/25/40/63 DN 15-150 Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied,
More informationDATA SHEET TB 26l. BR 26l, BR 26t, BR 26v, BR 26x Multi-port ball valve Ball valve in horizontal and vertical version. Application
DATA SHEET TB 26l BR 26l, BR 26t, BR 26v, BR 26x Multi-port ball valve Ball valve in horizontal and vertical version Application Tight-closing multi-port ball valve made of stainless steel for aggressive
More informationData sheet for MATRE BALANCED FOAM PROPORTIONERS
Data sheet for MATRE BALANCED FOAM PROPORTIONERS Datasheet for MATRE Balanced Foam Proportioners 1 Contents 2 General product information... 3 3 General product features:... 3 4 Flow range and interface
More informationSUREFLOW FLANGED FITTINGS DUCTILE IRON PIPELINE SYSTEMS
80-750. MANUFACTURED TO AS/NZS 2280. FLANGE DIMENSIONS TO AS 4087 Ductile Iron fittings provide high strength and impact resistance Suitale for in ground or aove ground applications All fittings are supplied
More informationType 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
More information2 way ball valve S4 with integrated Praher Labeling System
Praher Plastics Austria GmbH DB/EN/DEEN///33 Technische Änderungen vorbehalten! way ball valve S4 Symbol photo Safety locking handle system This document does not constitute a guarantee, it is for initial
More informationTwo-Way Metal Seated Ball Valve Type 16-R
Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationWafer check valve RSK 500
Wafer check valve RSK 00 Advantage corrosion resistant simple installation as a wafer type flange fitting centring of the valve by the housing diameter body with O-ring, no additional flange s required
More informationDifferential pressure controller with flow limitation and with integrated control valve (PN 16) AHPBM-F flow mounting, fixed setting
Data sheet Differential pressure controller with flow limitation and with integrated control valve (PN 16) AHPBM-F flow mounting, fixed setting Description The controller has a control valve with adjustable
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
More informationPLASTICA ALFA. Compression. Fittings. Pipe Saddles. For use. with. Polyethylene. Pipe. DPI Trading PRODUCT CATALOGUE PROUDLY IMPORTED BY
Compression PRODUCT CATALOGUE Fittings & Pipe Saddles For use with Polyethylene Pipe DPI Trading PROUDLY IMPORTED BY www.dpitrading.co.za www.incledon.co.za Technical Information Body: black polypropylene
More information-Super Proline Chemical Grade PVDF
EFFECTIVE: 5/26/10 Indutrial Piping Sytem Dimenional Guide #SPDIM Super Proline -Super Proline 3 r z www.aahi-america.com Dimenion ubject to change without notice, conult Aahi/America Engineering Department
More informationFlow controller with integrated control valve (PN 16) AHQM - return and flow mounting
Flow controller with integrated control valve (PN 16) AHQM - return and flow mounting Description Controllers are used together with Danfoss electrical actuators: DN 15-32 with - AMV(E) 10 - AMV(E) 13
More informationGATE VALVES S 38 APPLICATION
APPLICATION The gate valves of this design are controlled valves used as the shut-off units in the piping system. They can be used for water, saturated and superheated steam, gases, non-aggressive liquids,
More informationFE DN PVC-U. Butterfly valve
FE DN 40 200 PVC-U Butterfly valve FE DN 40 200 The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with a customisable Labelling
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
More informationFLUSH MOUNTED TC CONNECTION. Function: blind cap. Design: Requirement:
TK CONNECTION FLUSH MOUNTED TC CONNECTION Syringe device on TK connection sampling valve on TK Connection Typ. installation Function: Hygienic device features a compact design that allow the installation
More information