STRAUB-PLAST-PRO Technical Manual
|
|
|
- Vincent Barber
- 5 years ago
- Views:
Transcription
1 STRAU-PLAST-PRO Technical Manual
2 Contents STRAU-PLAST-PRO 3 Properties 3 Example 3 The full set 4 components 5 Conntectors 5 Pipe dimensions and tolerances 5 straub-plast-pro l Coupler 6 straub-plast-pro lr Repair-Coupler 7 straub-plast-pro r Reducer 8 straub-plast-pro b90 Elbow 90 9 straub-plast-pro b45 Elbow 45 0 straub-plast-pro t Equal Tee straub-plast-pro tfa Flanged ranch Tee 2 straub-plast-pro fb90 Duck Foot end 90 3 straub-plast-pro fa Flange Adapter 4 Notes 5 0 good reasons to use straub-plast-pro 6 2 Manual STRAU-PLAST-PRO 202/0
3 STRAU-PLAST-PRO Axial restraint connection of PE80 and PE00 pipes Axially restrained full set allowing a quick and simple installation of pressure pipes made of polyethylene (PE). The full sets are available for pipes in dimension ( mm, PN6) and (> mm, PN0). STRAU-PLAST-PRO is particularly suitable for water, waste water, industrial plants and maintenance applications. STRAU-PLAST-PRO is applicable, whenever pipes cannot be connected by conventional technologies, like electro fusion. The unique full set offers the great advantage that pipes can easily be connected without the need of external power supply and pipe end preparations, even under demanding external circumstances. Thanks to the simple installation concept, also people with less technical knowledge are able to install STRAU-PLAST-PRO. The pipes made of PE 80 or PE 00 are being connected with a combination of liner (e.g. Coupler, Reducer, Elbow 90, Elbow 45, Equal Tee, Flanged ranch Tee, etc.) and two connectors. STRAU-PLAST-PRO is highly resistant against corrosion, thanks to the usage of first class materials. PE pipes with additive protective layer and diffusion barrier layer are normally used, when drinking water lines have to be installed in contaminated soils. If the pipes are connected in a conventional manner, the aluminium layer has to be removed imperatively. This operation is not necessary if STRAU-PLAST-PRO is used. STRAU-PLAST-PRO connects such barrier layer pipes easily and safely without any pipe end preparation. Example STRAU-PLAST-PRO R Reducer Slide the connectors over both pipes. Push the reducer into the first tube until it stops Push the tubes together as far as they will go. Align the connectors to the pipe ends. Tighten the locking bolts alternately with a torque wrench to the final torque rate indicated on the label of the connector. Manual STRAU-PLAST-PRO 202/0 3
4 The full set STRAU-PLAST-PRO Description Liner Scope of delivery consisting of: Connector STRAU-PLAST-PRO L Coupler + 2x STRAU-PLAST-PRO LR Repair-Coupler (Repairs up to 00 mm, other lengths on request) + 2x STRAU-PLAST-PRO R Reducer + 2x STRAU-PLAST-PRO 90 Elbow x STRAU-PLAST-PRO 45 Elbow x STRAU-PLAST-PRO T Equal Tee + 3x STRAU-PLAST-PRO TFA Flanged ranch Tee * + 2x STRAU-PLAST-PRO F90 Duck Foot end 90 * + x STRAU-PLAST-PRO FA Flange Adapter * (loose flange is included) + x *Flange bolt set is not supplied (DIN EN 092-) Example for your order: STRAU-PLAST-PRO L 90.0, 4 Manual STRAU-PLAST-PRO 202/0
5 STRAU-PLAST-PRO Connectors 63 mm up to 80 mm 225 mm up to 355 mm DV braced KV braced Y Allen head Thread [M..] Torque Rate [Nm] / / Pipe dimensions and tolerances Our full sets are defined for the following pipe dimensions according to EN 920-2:2003. Size SDR min max Wall thickness min Wall thickness max ID Manual STRAU-PLAST-PRO 202/0 5
6 STRAU-PLAST-PRO L Coupler from 25 mm: PN 0 Product is consisting of x Coupler and 2 x Connector. The listed weight corresponds to the total product weight Manual STRAU-PLAST-PRO 202/0
7 STRAU-PLAST-PRO LR Repair-Coupler O-ring 2 Product is consisting of x Repair-Coupler and 2 x Connector. from 25 mm: PN 0 The listed weight corresponds to the total product weight X Other repair-lengths on reques 2 The O-ring prevents the connector from falling into the plastic pipe Manual STRAU-PLAST-PRO 202/0 7
8 STRAU-PLAST-PRO R Reducer from 25 mm: PN 0 Product is consisting of x Reducer and 2 x Connector. The listed weight corresponds to the total product weight. 90 x x x x x x AD 25.0 mm and AD 60.0 mm 8 Manual STRAU-PLAST-PRO 202/0
9 STRAU-PLAST-PRO 90 Elbow 90 from 25 mm: PN 0 Product is consisting of x Elbow 90 and 2 x Connector. The listed weight corresponds to the total product weight H Manual STRAU-PLAST-PRO 202/0 9
10 STRAU-PLAST-PRO 45 Elbow 45 from 25 mm: PN 0 Product is consisting of x Elbow 45 and 2 x Connector. The listed weight corresponds to the total product weight H 0 Manual STRAU-PLAST-PRO 202/0
11 STRAU-PLAST-PRO T Equal Tee from 25 mm: PN 0 Product is consisting of x Equal Tee and 3 x Connector. The listed weight corresponds to the total product weight E G Manual STRAU-PLAST-PRO 202/0
12 STRAU-PLAST-PRO TFA Flanged ranch Tee Product is consisting of x Flanged ranch Tee and 2 x Connector from 25 mm: PN 0 (flange bolt set is not supplied). The listed weight corresponds to the total product weight. Flange PN 6 olts 90 DN 80 M6, 8x DN 00 M6, 8x DN 80 M6, 8x DN 00 M6, 8x DN 80 M6, 8x DN 00 M6, 8x DN 80 M6, 8x DN 00 M6, 8x DN 50 M20, 8x DN 80 M6, 8x DN 00 M6, 8x DN 50 M20, 8x E Ø F G Flange according to DIN 2633 / EN Manual STRAU-PLAST-PRO 202/0
13 STRAU-PLAST-PRO F90 Duck Foot end 90 Product is consisting of x Duck Foot end 90 and x Connector from 25 mm: PN 0 (flange bolt set is not supplied). The listed weight corresponds to the total product weight. Flange PN 6 olts 63 DN 80 M6, 8x DN 80 M6, 8x DN 80 M6, 8x DN 80 M6, 8x DN 80 M6, 8x DN 80 M6, 8x Ø F G H J K L Flange according to DIN 2633 / EN 092- Manual STRAU-PLAST-PRO 202/0 3
14 STRAU-PLAST-PRO FA Flange Adapter Product is consisting of x Flange Adapter, x Conntector and x loose flange from 25 mm: PN 0 (flange bolt set is not supplied). The listed weight corresponds to the total product weight. Flange PN 6 olts 63 DN 50 M6, 4x DN 80 M6, 8x DN 65 M6, 8x DN 80 M6, 8x DN 00 M6, 8x DN 00 M6, 8x DN 50 M20, 8x DN 50 M20, 8x Ø F Flansch gemäss DIN 2633 / EN Manual STRAU-PLAST-PRO 202/0
15 Notes Manual STRAU-PLAST-PRO 202/0 5
16 0 good reasons to use STRAU-PLAST-PRO. Full set 2. Different liners are available 3. Suitable for the connection of standard PE pipes and PE multi-layer pipes 4. Installation without the need of external power supply 5. Suitable for pipe connections used in contaminated soils 6. Highly resistant against corrosion and oxidation 7. No pipe end preparation is necessary 8. Quick and simple installation 9. Stiffening ring is integrated in the full set 0. Easy to store due to long service life of components Due to the wide variety of applications, STRAU-PLAST-PRO is a great alternative compared to the fusion of PE pipes. The full set allows clean, cost-saving and primarily safe connections within a short period of time and without time-consuming preparations. The repair concept Damaged PE pipes can easily be repaired with the STRAU-PLAST-PRO repair liner. Repairs up to a length of 00 mm are possible, thanks to the unique technical characteristics. Other repair lengths are available on request. STRAU Werke AG Straubstrasse Wangs Switzerland Phone Fax straub@straub.ch ST00260_02 The information and data in this manual are intended to assist the user in the proper selection of STRAU products. This information may contain inaccuracies or typographical errors. Furthermore, all the information contained in this manual list is subject to change by STRAU Werke AG without prior notice as a result of product re-designs, product improvements or other reasons. STRAU Werke AG accepts no liability for damage arising as a result of the use of data, diagrams or application examples in this manual.
Our experience your guarantee. Our solution your added value
TECHNICAL MANUAL Our experience your guarantee The name STRAUB is synonymous with expertise, quality and reliability. As an internationally renowned manufacturer of pipe joints, STRAUB not only invented
Our experience your guarantee. Our solution your added value
TECHNICAL MANUAL Our experience your guarantee The name STRAUB is synonymous with expertise, quality and reliability. As an internationally renowned manufacturer of pipe joints, STRAUB not only invented
STRAUB Pipe Couplings
2015 STRAUB Pipe Couplings PROGRESSIVE SEALING EFFECT STRAUB-GRIP PROGRESSIVE ANCHORING EFFECT Joins different pipe materials STRAUB-FLEX SIMPLE RAPID STRAUB-GRIP VIBRATION AND NOISE DAMPING Progressive
RELIABLE CONNECTION TECHNOLOGY WITHOUT COMPROMISES STRAUB PIPE COUPLINGS. STRAUB Manual
RELIALE ONNETION TEHNOLOGY WITHOUT OMPROMISES STRAU PIPE OUPLINGS STRAU Manual Version 18 03 ONTENTS 50 YEARS STRAU 4 FEATURES AND ENEFITS 6 THE PRINIPLE 8 TEHNIAL PROPERTIES 9 STRAU PIPE OUPLINGS - AXIAL
STRAUB Pipe Couplings
2017 STRAUB Pipe Couplings PROGRESSIVE SEALING EFFECT STRAUB-GRIP PROGRESSIVE ANCHORING EFFECT Joins different pipe materials STRAUB-FLEX SIMPLE RAPID STRAUB-GRIP VIBRATION AND NOISE DAMPING Progressive
Wafer Check Valve Type 012 PVC-U
novel valve design with conical sealing surface for highest requirements and long service life body disc reinforced EPDM / FPM gaskets DN40 / d50 / 1½'' DN200 / d225 / 8'' operating pressure max. 10 bar
d z z Le Le Elbow d L mm equiv inch 110 Le r 1) z 5 2 5 5 8 2 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
Push-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented
Push-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented PE-100 / PVC-U pull-out resistant long type Push-Fit Transition Coupling for PE-100 and PVC-U water pipes up to 16 bar d90
The flexible connection compensator in one
STRAU- The flexible connection compensator in one and Sectional view STRAU- is the axially flexible coupling for all pipe materials. This type of coupling not only connects pipes, it simultaneously compensates
Air Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
GRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.
GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part
AquaGrip. Unique. Couplings & Flange Adaptors. For Polyethylene Pipe Connections
Unique AquaGrip Couplings & Flange Adaptors For Polyethylene Pipe Connections PIPE CONNECTIONS, REPAIR & FLOW CONTROL PRODUCTS FOR THE UTILITIES INDUSTRY AquaGrip Overview A High Performance Polyethylene
AquaGrip. Unique. Couplings & Flange Adaptors For Polyethylene Pipe Connections PIPE CONNECTIONS REPAIR FLOW CONTROL PRODUCTS
Unique AquaGrip Couplings & Flange Adaptors For Polyethylene Pipe Connections PIPE CONNECTIONS REPAIR FLOW CONTROL PRODUCTS AquaGrip Overview A High Performance Polyethylene Pipe Jointing System The AquaGrip
Safety you can trust.
Safety you can trust. Manual We connect safety with responsibility. Our experience your guarantee. The name STRAUB is synonymous with expertise, quality and reliability. As an internationally renowned
HDPE PIPE SYSTEMS PRODUCT CATALOGUE.
HDPE PIPE SYSTEMS PRODUCT CATALOGUE www.acu-tech.com.au This is to certify that: The Trustee for The Morren Family Trust ABN 52 394 633 042 Trading As Acu-Tech Piping Systems 119 Kelvin Road Maddington
i butt weld spigot i flanged end acc. to DIN PN 10 / 16
body material PVC-U PVC-C PP PVDF ball seat PTFE other seats iepdm ifpm i *) working temperature 0 C to 50 C 0 C to 90 C -20 C to 80 C nominal size DN to DN connection with pipe legth acc. to EN 558-1
Pioneers in pipe solutions NOW. up to DN600
Pioneers in pipe solutions NOW Available up to DN600 Get to grips with the NEW DN600 Key Benefits Grips and seals on the most corroded pipes Increased diameter range and wide tolerance delivers a reduction
Table of Contents. EIGERFLEX -Clima. 2.0 Table of Contents
2.0 Table of Contents 2.0 Table of Contents 2.1 System description 2.100 System description (general) 2.105 System description (data) 2.115 -Clima range, DN 20 - DN 125 / SDR 11 (coils) 2.120 -Clima range,
Ultra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
HAWLE - ZAK System. the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS.
HAWLE - System the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS. HAWLE - System the threadless, restraint jointing system for service connections integrated in Pipe Saddles, Service
Factory address: Mola sadra st., Abooreyhan st Eshtehard Industrial Town, TEHRAN/ IRAN
z d Le mm equiv inch Le r 1) z z Le L 110 5 2 5 5 8 2 Elbow d 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
PIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
Table of Contents 2.0 COOLFLEX CLX. 2.0 Table of Contents
Table of Contents CLX 2.0 2.0 Table of Contents 2.1 System description 2.100 System description (general) 2.105 System description (data) 2.115 range, DN 20 - DN 125 / SDR 11 (coils) 2.2 Planning, design
Product Specifications
PE 100 Metric Piping System Specifications 1. Scope This specification covers requirements for the +GF+ Georg Fischer (later named only +GF+) PE 100 Piping System intended for a wide range of applications
Flange connections For PE pipes, restraint. For ductile iron pipes, standard, restraint. Flange connections For steel pipes, standard, restraint
FANGE ONNETIONS Page 2 Page 3 connections For PE pipes, restraint Synoflex flange System 2000 flange connections For PV pipes For A pipes Synoflex flange System 2000 flange Page 2/1 Page E 4/1 Page F 4/1
THOMAS. PolyGrip Range. Couplings & Flange Adaptors Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Restrained Products PIPE PRODUCTS PolyGrip Range Restrained Couplings, Flange Adaptors, End Caps and Harnesses for HDPE and PVC Pipe D1 PolyGrip Range Application Fully
USING EXABOND TECHNOLOGY LINER PIPE
LINER PIPE Inside Diameter Liner Thickness DN - Nominal diameter S 1 - Liner wall thickness d 2 - Outside diameter of liner Liner material density for PVC: 1.38g/cm 3 Liner material density for PVC-C:
Table of Contents COOLMANT. 2.0 Table of Contents
CLM 2.0 Table of Contents 2.0 Table of Contents 2.1 System description 2.100 System description (general) 2.105 System description (data) 2.115 COOLMANT range, Ø 125 - Ø 315 / SDR 11/SDR 17 (bars) 2.2
HYMAX GRIP Wide-Range Restraint Solutions
HYMAX GRIP Wide-Range Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. HYMAX restraint products combine
A type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
5. STRAUB-FLEX / STRAUB-REP
5. STRAUB-FLEX / 5.1 STRAUB-FLEX For gas and water supply, sewage treatment, industrial plants, power plants and shipbuilding: STRAUB- FLEX is the optimal pipe joint. Suitable for suction or pressure lines,
Linear Axes Technical Data Summary
components Technical Data Summary Pneumatic Axes Electrical Axes LM 6 P LM 8 P LM 8 PV LM 10 P LM 6 PE LM 8 PE LM 8 PEV LM 10 PE Standard stroke lengths [mm]: h 0-150 Overall length [mm]: L 408 468 468
product catalogue Q116 ISO 9001:2008 certified
product catalogue Q116 ISO 9001:2008 certified Haelok the company Haelok fittings are considered the only mechanical alternative to welding. Haelok AG, the inventor of one of the world strongest mechanical
PE100 Polyethylene pipes and fittings systems
PE100 Polyethylene pipes and fittings systems Polyethylene (PE) pipes have been produced in New Zealand and Australia since the mid 1950 s. The first Australian Standard for polyethylene pipe was released
NEW AL OR COILED PIPES ENHANCED DESIGN VAILABLE IN 280MM DIAMETER EASIER FITTING ON OV NOW A
NEW ENHANCED DESIGN EASIER FITTING ON OVAL OR COILED PIPES NOW AVAILABLE IN 280MM DIAMETER Responsive AquaFast Couplings & Flange Adaptors For Polyethylene & PVC Connections PIPE CONNECTIONS REPAIR FLOW
Table of Contents 2.0 EIGERFLEX CPE. 2.0 Table of Contents
Table of Contents 2.0 2.0 Table of Contents 2.1 System description 2.100 System description (general) 2.105 System description (data) 2.115 DN 20 - DN 40 with frost protection strip, Ø carrier pipe 25-50
ANNEX 2. Scope of Works 1.0. Introduction. The United. joint pipes and lengths, iv items. and testing. all tests and 2.0.
ANNEX 2 Pre Shipment Inspectionn and Testing of Ductile Iron Pipes Scope of Works 1.0 Introduction The United Nation intends to procure ductile iron pipes, fittings and valves from China and Italy. The
HAWLE-specification water
water GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN HAWLE - Epoxy Powder-Coating High quality corrosion
connection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
Series 870 Sleeve coupling for repairs Sizes Ø 25, Ø 32, Ø 40, Ø 50
ouplings for polyethylene pipe series cert. n 0003 ISO 9001 LFFI 01037/03 G Function couplings, which are supplied in brass for diameters up to 63 mm and in cast iron for larger sizes, are used for connecting
QuickFit. Simple. Couplings & Flange Adaptors. Pioneers in pipe solutions. Close Tolerance Preassembled Fittings
Simple QuickFit Couplings & Flange Adaptors Close Tolerance Preassembled Fittings Pioneers in pipe solutions QuickFit Overview Dedicated Couplings & Flange Adaptors The QuickFit coupling range is designed
BALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
Assembly Instructions and Handling Regulations for KLINGER. Piston Valves KVN DN VI,VIII and Regulating Piston KVRLN DN , PN 40 VI, VIII
Page 1 Assembly Instructions and Handling Regulations for KLINGER Piston Valves KVN DN 65-200 VI,VIII and Regulating Piston KVRLN DN 65-200, PN 40 VI, VIII pressure released type with valve ring KX-GT
AVE WATER FOR GREEN FUTURE A B O U T U S HISTORY PRODUCTS AND SERVICES.
HISTORY A B O U T U S Skala family started the private business in 99. The founder of the company was Mr. Mihalj Skala. Generation after generation has continued to develop and improve the family tradition
COOLSAFE Pre-Insulated PE Piping System
COOLSAFE Pre-Insulated PE Piping System Pipe Fittings Valves Installation COOLSAFE PE piping system provides a cost effective way for installing insulated piping for a broad range of industries. Pipe and
JOINTING OF LARGE BORE PE PIPES: THINK BIG AND EVEN BIGGER!
JOINTING OF LARGE BORE PE PIPES: THINK BIG AND EVEN BIGGER! Robert Eckert FRIATEC AG, Germany Abstract A New Generation of Electrofusion: A technical comparison between the new wedge coupler and the traditional
h Technical Product Data FW Pressure Pipe Systems
h Technical Product Data FW Pressure Pipe Systems E Engineering GmbH All rights reserved. Publication: 10/2012 All rights reserved. No part of this document may be reproduced or utilized in any form or
DOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate valve is a bi-directional valve widely used in the Pulp and Paper industry (paper recycling) and especially designed to handle high concentrated or contaminated
Plast/Joint. The mechanical connection with unique one bolt system for plastic pipes d63 d315
Plast/Joint The mechanical connection with unique one bolt system for plastic pipes d63 d315 Plast/Joint >> Quick and efficient installation due to one bolt system >> Do you encounter repairs at difficult
FK DN PVC-U Butterfly valve
.co.th FK DN 40 300 PVC-U Butterfly valve FK DN 40 300 The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring
Supplementary instructions Flanges according to DIN - EN - ASME - JIS - GOST Technical data. Document ID: 31088
Supplementary instructions Flanges according to DIN - EN - ASME - JIS - GOST Technical data Document ID: 10 1 Product description 1 Product description 1.1 Specifications The described flanges are threaded
Type Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-Way Solenoid Valve 2/2-Wege-Magnetventil Électrovanne à 2/2 voies
Type 5282 2/2-Way Solenoid Valve 2/2-Wege-Magnetventil Électrovanne à 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation 1 OPERATING INSTRUCTIONS The operating instructions contain
NSF/ANSI 61 Drinking Water System Components Health Effects
The Public Health and Safety Organization NSF Product and Service Listings These NSF Official Listings are current as of Thursday, January 08, 2015 at 12:15 a.m. Eastern Time. Please contact NSF International
Sewage transport Submersible pumps
Series description Wilo-Rexa FIT Available from January 2012 Construction Submersible sewage pump with cast iron hydraulics and stainless steel motor Type key Example: Wilo Rexa FIT V06DA-110/EAD1-2-T0015-540-A
large diameter ElectroFusion fittings & tools for large diameter pipes
large diameter ElectroFusion fittings & tools for large diameter pipes Page 2 Couplers for Large Diameter Pipes Couplers PN10 and PN16 Why use Large Diameter ElectroFusion Couplers Narrow trenches and
FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR
FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR Bortek Pipe Coupling Systems info / order by mail bortek@bortek.com.tr info / order by Fax +90 / 212 876 55 26 info / order
Type Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-Way Solenoid Valve 2/2-Wege-Magnetventil Électrovanne à 2/2 voies
Type 5282 2/2-Way Solenoid Valve 2/2-Wege-Magnetventil Électrovanne à 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation Contents 1 Operating Instructions... 2 2 Authorized use...
product catalogue Q215 ISO 9001:2008 certified
product catalogue Q215 ISO 9001:2008 certified Haelok the company Haelok Inc, the inventor of one of the world strongest mechanical pipe connection, is a Zurich, Switzerland based privately held company,
Grooved gaskets. Types of gaskets
Types of gaskets have proven extremely useful in all areas of industry, including the most demanding sealing tasks. Our grooved gaskets can be found in conventional power plants as well as in the primary
Hawle Haku PE Pipe Saddle
Hawle Haku PE Pipe Saddle Scan for more information Technical Guide W9.1 Specifically designed as a PE mechanical connection solution. Suitable for PE pipes of all pressure ratings up to PN 16. DN40-360.
RAUVITHERM AND RAUTHERMEX PRE-INSULATED PIPES FOR DISTRICT HEATING PARTS LIST ENERGY EFFICIENCY. Building Solutions Automotive Industry
RAUVITHERM AND RAUTHERMEX PRE-INSULATED PIPES FOR DISTRICT HEATING PARTS LIST ENERGY EFFICIENCY Valid from 01. April 2014 817302 EN Subject to Technical Alterations www.rehau.uk/districtheating Building
Wall thickness Class 1 Class 2 Class 3 Class kgf/cm² 9.19 kgf/cm² kgf/cm² kgf/cm² Nominal outside diameter.
PVC-U PRESSURE PIPE SYSTEMS For drinking Water- Omani Standard OS 85/1985 Wall thickness Class 1 Class 2 Class 3 Class 4 6.12 kgf/cm² 9.19 kgf/cm² 12.25 kgf/cm² 15.30 kgf/cm² Nominal outside diameter Tolerance
1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler
1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler Material Maximum working pressure Test pressure Minimum Burs Pressure uminium 16 bar / 232 psi 24 bar / 348 psi 80 bar / 1160
Advanced PE Single Wall Piping System
Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply
4 01 ta l o g u e 2 Ca P R i c e L I S T
Catalogue 2014 The Complete Product Range The compression fittings: Our Gebo Quick the universal compression fittings are available for steel pipes of 1/2" to 2" diameter, for black steel pipes of 20 mm
GAS DISTRIBUTION PRODUCTS METER RISERS
GAS DISTRIBUTION PRODUCTS METER RISERS INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today a leading manufacturer
DOUBLE GATE KNIFE GATE VALVE. OBX 09/09 8th EDITION Reserves the right to change specifications without notice
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
Ball valve C 100 multi-part, high k v value, high stability
Ball valve C 00 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable and ball
FE DN PVC-U. Butterfly valve
FE DN 40 200 PVC-U Butterfly valve FE DN 40 200 The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with a customisable Labelling
ASBESTOS/NON-ASBESTOS GASKET Style No:TFG. The Flat Gaskets are the most typical ones from the family of flat static gaskets
ASBESTOS/NON-ASBESTOS GASKET Style No:TFG The Flat Gaskets are the most typical ones from the family of flat static gaskets They are used in a large number by various industries and in a variety of applications
2019 Price List. Thrust-Resistant Joints Pressure Pipe Fittings for Plastic Pipelines Pipe Fittings for Sewage Pipelines Socket Connections
FITTINGS AND VALVES 2019 Price List Gate Valves Service Connection Valves Hydrants Butterfly Valves Back Flow Preventers, Ventilation Valves Control Valves Novo Plug-in System Accessories Pressure Pipe
PLASTICA ALFA. Compression. Fittings. Pipe Saddles. For use. with. Polyethylene. Pipe. DPI Trading PRODUCT CATALOGUE PROUDLY IMPORTED BY
Compression PRODUCT CATALOGUE Fittings & Pipe Saddles For use with Polyethylene Pipe DPI Trading PROUDLY IMPORTED BY www.dpitrading.co.za www.incledon.co.za Technical Information Body: black polypropylene
Joining Large PE Pipes in No Time at All: A New Generation of Electrofusion
SAFE JOINING TECHNOLOGY ON A GRAND SCALE FRIALEN XL Offprint No. 2/2011 Joining Large PE Pipes in No Time at All: A New Generation of Electrofusion A technical comparison between the new conical ring coupler
Precision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
Piping technology gunmetal
model no. page model no. page model no. page model no. page model no. page Sanpress with SC-Contur Piping technology gunmetal 1 ZM_G3_int_en_20170106_082446_5.pdf 1 06.01.2017 10:02:32 Press connector
reinforcing bar splicing COUPLER INSTRUCTION MANUAL
reinforcing bar splicing COUPLER INSTRUCTION MANUAL copyright 004 Erico BV EBV - 039700 - CRP1 - GB 0 CONTENTS 0. CONTENTS PAR SUBJECT PAGE 0. CONTENTS 0-1 1. LENTON COUPLER TYPE OVERVIEW 1-1. TORQUE WRENCHES
T-Rack 3.0. Integrated rack solutions for ultrafiltration
T-Rack 3.0 Integrated rack solutions for ultrafiltration T-Rack 3.0 state-of-the-art ultrafiltration solutions Proven T-Rack 3.0 concept safe and reliable operation dizzer UF modules with 80 m² more performance
Table of contents. Chapter 1: Fusiotherm. Chapter 4: climasystem Produktgruppe 20. Chapter 5: aquatherm. Chapter 2: aquatherm SHT.
Table of contents Chapter 1: Fusiotherm 01 Fusiotherm -pipe 04 climatherm-pipe & aquatherm-lilac 07 Accessories 09 Fittings 15 Weld-in saddle 19 Threaded connections and accessories 22 Transition pieces
Pressure/ Water Polyethylene (PE) Pipes - Series 1 to AS/ NZS 4130:2009 millimetres SDR 41
Pressure/ Water Polyethylene (PE) Pipes - Series 1 to AS/ NZS 4130:2009 SDR 41 SDR 33 SDR 26 Mean Maximum PN4 PE100 / PN3.2 PE80 PN4 PE80 PN6.3 PE100 out-of- Wall Mean inside Wall Mean inside Wall Mean
Pipeline Accessories. Rubber Steel gasket Type RSG Type RSG-V Type RFG 4 pipes
Pipeline Accessories Rubber Steel gasket Type RSG Type RSG-V Type RFG 4 pipes Flange Gaskets Type RSG 4 pipes Reg.Nr. NG-5113CQ0574 Trinkwasser KTW/W270 Product Information RSG 4 pipes Rubber-Steel-Flange-Gasket
Wide-Range Coupling Solutions
Wide-Range Coupling Solutions HYMAX. CONNECTING THE FUTURE. A revolutionary product that set a new industry standard, the HYMAX* product line has been field-proven in millions of installations world-wide.
BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - N123 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
Vertical Immersion Pump VTP - BBF
MB / General VTP centrifugal pumps in block design (BBF) correspond to the system of two-pipe pumps. Basically these immersion pumps are single-level immersion pumps with vertical axis the main components
C 200 Modern Construction. Flexible Modular Design. Highest Safety.
Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface
Product Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
PRODUCT CATALOGUE DOUBLE PREINSULATED PIPES
PN-EN 15698-1 ITB Technical Approval AT-15-7772/2008+ Annex no.1 Validity term: September 30, 2013 Issued by the Building Research Institute in Warsaw Preinsulated Pipe System To Be Used In Buried Thermal
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
DOULE-ECCENTRIC UTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 250 mm Between flanges PN16/40-28 C + 200 C Max Pressure : 40 Bars up to DN80, 16 bars over Specifications : With ISO 5211 mounting pad Contents
BUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - 223 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
VERSION 2. PVC FITTINGS & VALVES Technical Catalogue
VERSION 2 PVC FITTINGS & VALVES Technical Catalogue INTRODUCTION Plasson s innovative products revolutionized the way of connecting polyethylene pipes in the 1960 s. We started with fittings for agricultural
Design Stress = 8 Mpa
hdpe Pipes HdPE Pipes Muna Noor Manufacturing & Trading LLC is a pioneer in the manufacture of plastic pipe systems in Oman. Today s modern polyethylene resins are highly engineered for rigorous applications
HV Gate Valve with pneumatic actuator
HV Gate Valve with pneumatic actuator This manual is valid for the valve ordering number(s): 09134-_E14/24/34/44 09136-_E14/24/34/44 09138-_E14/24/34/44 09140-_E14/24/34/44 09144-_E14/24/34/44 The fabrication
General lnstructions BAIO System
General lnstructions BAIO System For decades mainly flangeless components have been used for pipes and pipe fittings of buried supply lines, as this coupling system affords some technical and economic
VERSION 3. PVC FITTINGS & VALVES Technical Catalogue
VERSION 3 PVC FITTINGS & VALVES Technical Catalogue INTRODUCTION Plasson s innovative products revolutionized the way of connecting polyethylene pipes in the 1960 s. We started with fittings for agricultural
Technische Dokumentation Technical Documentation
Technische Dokumentation Technical Documentation XOMOX Fully Lined Plug Valves Two-way 021 121-8121 ISO5211 Dok. Nr.: tdb_lpv-iso_gb D-88131 Lindau / Deutschland August 2014 Page 2 of 8 Design Features
7 MPa APPLICATION HYDRAULIC CYLINDER (HC1-X* SERIES) φ40 TO φ100
7 MPa APPLICATION HYDRAULIC CYLINDER (HC-X* SERIES) φ40 TO φ00 The HC-X* series cylinders are the successors of the HC-**X3 series cylinders. The previous series has been redesigned for improved ease of
CENTRIFUGAL IMMERSION PUMPS
CENTRIFUGAL IMMERSION PUMPS FLUX CENTRIFUGAL IMMERSION PUMPS QUALITY THAT SETS STANDARDS Manufactured at our main plant, these ranges of immersion pumps are the result of extensive product and process
PE-HDXc pipes (physically cross-linked polyethylene pipes)
pipes (physically cross-linked polyethylene pipes) Applications: Domestic drinking water installations, radiator connections and surface regulation Special properties high chemical resistance (according
KLINGER Piston Valves KVN DN PN 16 I/III with valve ring KX-GT Modul
Page 1 Assembly Instructions and Handling Regulations for KLINGER Piston Valves KVN DN 65 150 PN 16 I/III with valve ring KX-GT Modul DN 125-150 1 Body 2 Bonnet 3 Hand wheel 4 Piston 5 Lantern bush 8 Threaded