Supplementary instructions Flanges according to DIN - EN - ASME - JIS - GOST Technical data. Document ID: 31088
|
|
- Melvin Houston
- 6 years ago
- Views:
Transcription
1 Supplementary instructions Flanges according to DIN - EN - ASME - JIS - GOST Technical data Document ID: 10
2 1 Product description 1 Product description 1.1 Specifications The described flanges are threaded flanges with seal ledge and are available with G 1 or G 1½ (ISO 8 T1) inner thread. The specifications in these supplementary instructions refer to flanges made of 16L. Material 16L corresponds to 1.44 or All distance values in mm. The flanges are available in different versions according to the following standards: DIN - German National Standards Institute (DIN 1) EN - European Standard (EN 109-1) ASME - American Society of Mechanical Engineers (ANSI B 16.5) JIS - Japanese Industrial Standard (B ) GOST - Federal agency for technical control and metrology - Russia (1-80) Flanges according to DIN - EN - ASME - JIS - GOST Technical data 10-EN-10107
3 Dimensions.1 DIN flanges (DIN 1) L b f Dimensions d K D Fig. 1: Dimensions - DIN flange DIN 1 (seal ledge DIN 56 Form C) L Diameter of holes (number of holes) d Seal ledge diameter K Diameter of hole circle D Flange diameter b Total flange thickness f Seal ledge height PN (4.58) 16 (0.6) 85 (.47) (.677) 4 x ø 14 (0.551) 1, (.71) (1.6) 1 (5.51) 16 (0.6) (.97) (.071) 1,8 (.9) 16 (0.6) (4.1) (.465),09 (4.608) 165 (6.496) 15 (4.91) 10, (6.49) 65 (.56) 5 (7.84) 1 (4.80),66 (8.069) 80 (.15) 00 0 (0.7) (6.) (5.4) 8 x ø 4,8 (10.65) (.97) 0 (8.661) 0 (0.7) 0 (7.087) 158 (6.1) 8 x ø 5,75 (1.) 15 (4.91) (9.84) 10 (8.) 8 (7.) 8 x ø 8,59 (.94) 10-EN (6.89) (11.) 16 (1.44) (1.9) 4 4 (9.449) 70 (10.6) 95 (11.61) 1 (8.47) 4 (9.58) (10.55) 8 x ø 8 x ø 8 x ø 10,6 (.7) 14, (1.5) 16,9 (7.6) Flanges according to DIN - EN - ASME - JIS - GOST Technical data
4 Dimensions (9.84) 95 (15.55) 6 (1.04) (1.) 0 (1.6) 1xø 4,7 (54.45) (17.5) 6 (1.04) 0 (15.75) 70 (14.57) 4 (0.158) 1xø 1,9 (70.) Tab. 1: Dimensions - DIN flange PN 10. All distance values in mm (in) PN (4.58) 16 (0.6) 85 (.46) (.677) 4 x ø 14 (0.551) 1, (.71) (1.6) 1 (5.51) 16 (0.6) (.97) (.071) 1,8 (.9) 16 (0.6) (4.1) (.465),09 (4.608) 165 (6.496) 15 (4.91) 10, (6.49) 65 (.559) 5 (7.8) 1 (4.80),66 (8.069) 80 (.15) 00 0 (0.7) (6.99) (5.4) 8 x ø 4,8 (10.65) (.97) 0 (8.661) 0 (0.7) 0 (7.087) 158 (6.0) 8 x ø 5,75 (1.) 15 (4.91) (9.84) 10 (8.) 8 (7.) 8 x ø 8,59 (.94) 85 (11.) (9.449) 1 (8.46) 8 x ø 10,6 (.7) 175 (6.89) 16 (1.44) 4 70 (10.6) 4 (9.58) 8 x ø 14, (1.5) 00 (1.9) 4 95 (11.61) (10.55) 1xø 16,5 (6.8) (9.84) 5 (15.95) 6 (1.04) 55 (1.98) 0 (1.6) 1xø6 (1.04) 5,6 (56.44) (.11) 8 (1.10) 410 (16.14) (14.) 4 (0.157) 1xø6 (1.04) 6,1 (79.59) Tab. : Dimensions - DIN flange PN 16. All distance values in mm (in) PN (4.58) 85 (.46) (.677) 4 x ø 14 (0.551) 1,8 (.04) 4 Flanges according to DIN - EN - ASME - JIS - GOST Technical data 10-EN-10107
5 Dimensions (1.6) 1 (5.51) (.97) (.071),0 (4.475) (4.1) (.465),5 (5.101) 165 (6.496) 0 (0.7) 15 (4.91) 10, (7.055) 65 (.56) 5 (7.8) 1 (4.80) 8 x ø 4, (9.546) 80 (.15) 00 4 (6.) (5.4) 8 x ø 5,94 (1.1) (.97) 5 (9.5) (7.48) 16 (6.) 8 x ø 7,64 (16.84) 15 (4.91) 70 (10.6) 6 (1.04) 0 (8.661) 8 (7.) 8 x ø 6 (1.04) 11 (4.5) 00 8 (1.10) (9.84) (8.58) 8 x ø 6 (1.04) 14,7 (.41) 175 (6.89) 0 (1.99) 8 (1.10) 80 (11.0) 48 (9.764) 1xø6 (1.04) 17,6 (8.80) (14.17) 0 (1.1) 10 (1.1) (10.95) 1xø6 (1.04),7 (.05) (9.84) 45 (16.7) (1.6) 70 (14.57) 5 (1.19) 16xø0 (1.1) 4, (75.4) (19.09) 4 (1.9) (16.9) 95 (15.55) 4 (0.157) 16xø0 (1.1) 47, (104.) Tab. : Dimensions - DIN flange PN 5. All distance values in mm (in) PN (4.58) 85 (.46) (.677) 4 x ø 14 (0.551) 1,8 (.04) (1.60) 1 (5.51) (.97) (.071),0 (4.475) (4.1) (.465),5 (5.1) 165 (6.496) 0 (0.7) 15 (4.91) 10, (7.055) 10-EN (.560) 80 (.) 5 (7.8) 00 4 (6.99) 1 (4.80) (5.4) 8 x ø 8 x ø 4, (9.546) 5,94 (1.1) Flanges according to DIN - EN - ASME - JIS - GOST Technical data 5
6 Dimensions (.97) 5 (9.5) (7.48) 16 (6.) 8 x ø 7,64 (16.84) 15 (4.91) 70 (10.6) 6 (1.04) 0 (8.661) 8 (7.) 8 x ø 6 (1.04) 11 (4.5) 00 8 (1.10) (9.84) (8.58) 8 x ø 6 (1.04) 14,7 (.41) 175 (6.89) (1.) (1.6) 95 (11.61) 60 (10.4) 1xø0 (1.1),4 (49.8) (14.76) 4 (1.9) 0 (1.6) 85 (11.) 1xø0 (1.1) 7,6 (60.85) (9.84) 4 (17.7) 8 (1.496) 85 (15.16) 45 (1.58) 1xø (1.99) 44,5 (98.11) (0.8) 4 (1.654) 4 (17.7) 410 (16.14) 4 (0.157) 16xø (1.99) 64, (141.8) Tab. 4: Dimensions - DIN flange PN. All distance values in mm (in) PN (5.51) 4 (.97) (.677),65 (5.84) (1.60) 155 (6.10) 4 (4.1) (.071) 4 x ø,4 (7.14) 170 (6.69) 6 (1.04) 15 (4.91) (.465) 4 x ø 4,09 (9.017) 0 (7.087) 6 (1.04) 15 (5.15) 10 4 x ø 4,51 (9.94) 65 (.559) 05 (8.071) 6 (1.04) (6.99) 1 (4.80) 8 x ø 5,71 (1.59) 80 (.15) 15 (8.465) 8 (1.10) 170 (6.69) (5.4) 8 x ø 6,9 (15.6) (.97) (9.84) 0 (1.1) (6.) 8 x ø 6 (1.04) 10,1 (.7) 15 (4.91) 95 (11.61) 4 (1.9) (9.449) 8 (7.) 8 x ø 0 (1.1) 16 (5.7) 45 (1.58) 6 80 (11.0) (8.58) 8 x ø (1.99),5 (51.81) 175 (6.9) (14.76) 415 (16.4) 4 (1.654) 10 (1.1) 45 (1.58) 60 (10.4) 85 (11.) 1xø (1.99) 1xø6 0,8 (67.9) 9,7 (87.5) 6 Flanges according to DIN - EN - ASME - JIS - GOST Technical data 10-EN-10107
7 Dimensions (9.84) 470 (.5) 46 (1.811) 0 (15.75) 45 (1.58) 1xø6 57,4 (16.5) 00 (0.87) 5 (.047) 460 (.11) 410 (16.14) 4 (0.157) 16xø6 81 (1.6) Tab. 5: Dimensions - DIN flange PN 64. All distance values in mm (in) PN 5 1 (5.51) 4 (.97) (.677),65 (5.84) (1.6) 155 (6.10) 4 (4.1) (.071) 4 x ø,4 (7.14) 170 (6.69) 6 (1.04) 15 (4.91) (.465) 4 x ø 4,09 (9.017) 195 (7.677) 8 (1.10) 10 4 x ø 6 (1.04) 5,84 (1.) 65 (.56) 0 (8.661) 0 (1.1) 170 (6.69) 1 (4.80) 8 x ø 6 (1.04) 8,0 (17.7) 80 (.15) 0 (9.055) (1.6) 0 (7.087) (5.4) 8 x ø 6 (1.04) 9,4 (0.79) (.97) 65 (10.4) 6 10 (8.) 16 (6.) 8 x ø 0 (1.1) 14, (1.5) 15 (4.91) 15 (1.4) (9.84) 8 (7.) 8 x ø (1.99),6 (49.8) 55 (1.98) 44 (1.7) 90 (11.4) (8.58) 1xø (1.99) 1,8 (70.11) 175 (6.89) 85 (15.16) 48 (1.89) 0 (1.6) 60 (10.4) 1xø (1.) 41, (91.05) 00 (16.9) 5 (.047) 60 (14.17) 85 (11.) 1xø6 56,1 (1.7) (9.84) 5 (19.) 60 (.6) (16.9) 45 (1.58) 1xø9 (1.55) 89,6 (197.5) (.0) (.677) 0 (19.69) 410 (16.14) 4 (0.157) 16xø4 (1.654) 119 (6.4) Tab. 6: Dimensions - DIN flange PN. All distance values in mm (in) 10-EN Flanges according to DIN - EN - ASME - JIS - GOST Technical data 7
8 . EN flanges (EN 109-1) L b f Dimensions d K D Fig. : Dimensions - EN flange EN (seal ledge B1) L Diameter of holes (number of holes) d Seal ledge diameter K Diameter of hole circle D Flange diameter b Total flange thickness f Seal ledge height PN (4.58) 85 (.46) (.677) 4 x ø 14 (0.551) 1,5 (.07) (1.6) 1 (5.51) (.97) (.071) (4.9) (4.1) (.465),5 (5.51) 165 (6.496) 15 (4.91) 10,9 (6.9) 65 (.559) 5 (7.8) 1 (4.80) 8 x ø,5 (7.716) 80 (.15) 00 0 (0.7) (6.99) (5.4) 8 x ø 4,5 (9.91) (.97) 0 (8.661) 0 (0.7) 0 (7.087) 158 (6.1) 8 x ø 5,5 (1.1) 15 (4.91) (9.84) 10 (8.) 8 (7.) 8 x ø 8 (17.64) 85 (11.) (9.449) 1 (8.46) 8 x ø 10,5 (.15) 00 (9.84) (1.9) 5 (15.95) 4 6 (1.04) 95 (11.61) 55 (1.98) (10.55) 0 (1.6) 1xø 1xø6 (1.04) 16,5 (6.8) 5 (55.1) 8 Flanges according to DIN - EN - ASME - JIS - GOST Technical data 10-EN-10107
9 Dimensions (.11) 8 (1.10) 410 (16.14) (14.) 1xø6 (1.04) 5 (77.16) Tab. 7: Dimensions - EN flange PN 16. All distance values in mm (in) PN (4.58) 85 (.46) (.677) 4 x ø 14 (0.551) 1,5 (.07) (1.60) 1 (5.511) (.97) (.071) (4.9) (.97) (.465),5 (5.51) 165 (6.496) 0 (0.7) 15 (4.91) 10 (6.614) 65 (.559) 5 (7.84) 1 (4.80) 8 x ø 4,5 (9.91) 80 (.15) 00 4 (6.99) (5.4) 8 x ø 5,5 (1.1) (.97) 5 (9.5) (7.48) 16 (6.) 8 x ø 7,5 (16.54) 15 (4.91) 70 (10.6) 6 (1.04) 0 (8.661) 8 (7.) 8 x ø 6 (1.04) 11 (4.5) 00 8 (1.10) (9.84) (8.58) 8 x ø 6 (1.04) 14,5 (1.97) (14.17) 0 (1.1) 10 (1.1) (10.95) 1xø6 (1.04),5 (49.6) (9.84) 45 (16.7) (1.6) 70 (14.57) 5 (1.19) 1xø0 (1.1),5 (7.86) (19.09) 4 (1.9) (16.9) 95 (15.55) 16xø0 (1.1) 46,5 (10.5) Tab. 8: Dimensions - EN flange PN 5. All distance values in mm (in) PN 10-EN (1.60) 115 (4.58) 1 (5.51) 85 (.46) (.97) (4.1) (.677) (.071) (.465) 4 x ø 14 (0.551) 1,5 (.07) (4.9),5 (5.511) Flanges according to DIN - EN - ASME - JIS - GOST Technical data 9
10 Dimensions 165 (6.496) 0 (0.7) 15 (4.91) 10 (6.614) 65 (.559) 5 (7.8) 1 (4.80) 8 x ø 4,5 (9.91) 80 (.15) 00 4 (6.99) (5.4) 8 x ø 5,5 (1.1) (.97) 5 (9.5) (7.48) 16 (6.) 8 x ø 7,5 (16.5) 15 (4.91) 70 (10.6) 6 (1.04) 0 (8.661) 8 (7.) 8 x ø 6 (1.04) 11 (4.5) 00 8 (1.10) (9.84) (8.58) 8 x ø 6 (1.04) 14,5 (1.97) (14.76) 6 0 (1.6) 85 (11.) 1xø0 (1.1) 9 (6.9) (9.84) 4 (17.7) 8 (1.496) 85 (15.16) 45 (1.58) 1xø (1.99) 44,5 (98.11) (0.8) 4 (1.654) 4 (17.7) 410 (16.14) 16xø (1.99) 64 (141.1) Tab. 9: Dimensions - EN flange PN. All distance values in mm (in) PN (5.51) 4 (.97) (.677),5 (5.51) (1.6) 155 (6.10) 4 (4.1) (.071) 4 x ø,5 (7.716) 170 (6.69) 6 (1.04) 15 (4.91) (.465) 4 x ø 4,5 (9.91) 0 (7.087) 6 (1.04) 15 (5.15) 10 4 x ø 5 (11.0) 65 (.56) 05 (8.071) 6 (1.04) (6.) 1 (4.80) 8 x ø 6 (1.) 80 (.15) 15 (8.465) 8 (1.10) 170 (6.69) (5.4) 8 x ø 7,5 (16.54) (.97) (9.84) 0 (1.1) (6.) 8 x ø 6 (1.04) 10,5 (.15) 15 (4.91) 95 (11.61) 45 (1.58) 4 (1.9) 6 (9.449) 80 (11.0) 8 (7.) (8.58) 8 x ø 0 (1.1) 8 x ø (1.99) 16,5 (6.8) 4,5 (54.01) 10 Flanges according to DIN - EN - ASME - JIS - GOST Technical data 10-EN-10107
11 Dimensions (16.4) 4 (1.654) 45 (1.58) 85 (11.) 1xø6,5 (89.9) (9.84) 470 (.5) 46 (1.811) 0 (15.75) 45 (1.58) 1xø6 58 (17.9) 00 (0.87) 5 (.047) 460 (.11) 410 (16.14) 16xø6 8,5 (4.1) Tab. 10: Dimensions - EN flange PN 6. All distance values in mm (in) PN 5 1 (5.51) 4 (.97) (.677),5 (5.51) (1.6) 155 (6.10) 4 (4.1) (.071) 4 x ø,5 (7.716) 170 (6.69) 6 (1.04) 15 (4.91) (.465) 4 x ø 4,5 (9.91) 195 (7.677) 8 (1.10) 10 4 x ø 6 (1.04) 6 (1.) 65 (.56) 0 (8.661) 0 (1.1) 170 (6.69) 1 (4.80) 8 x ø 6 (1.04) 8 (17.64) 80 (.15) 0 (9.055) (1.6) 0 (7.087) (5.4) 8 x ø 6 (1.04) 9,5 (0.94) (.97) 65 (10.4) 6 10 (8.) 16 (6.) 8 x ø 0 (1.1) 14 (0.87) 15 (4.91) 15 (1.4) (9.84) 8 (7.) 8 x ø (1.99),5 (49.6) 55 (1.98) 44 (1.7) 90 (11.4) (8.58) 1xø (1.99) 0,5 (67.4) 00 (16.9) 5 (.047) 60 (14.17) 85 (11.) 1xø6 54,5 (10.) (9.84) 5 (19.) 60 (.6) (16.9) 45 (1.58) 1xø9 (1.55) 87,5 (19.9) (.0) (.677) 0 (19.69) 410 (16.14) 16xø4 (1.654) 11,5 (89.9) Tab. 11: Dimensions - EN flange PN. All distance values in mm (in) 10-EN Flanges according to DIN - EN - ASME - JIS - GOST Technical data 11
12 . ASME flanges (ASME B 16.5) L 1 b b f f Dimensions d K D Fig. : Dimensions - ASME flange B 16.5 (seal ledge RF) 1 Dimensioning up to Class 0 Dimensioning from Class 0 L d K D b f Diameter of holes (number of holes) Seal ledge diameter Diameter of hole circle Flange diameter Total flange thickness Seal ledge height lb/00 lb: 1.6 mm (0.06 in) or from 600 lb: 6.4 mm (0.5 in) Class DN D b d K L ~ kg 1" 108 (4.5) 14, (0.559),8 () 79, (.1) 4 x ø 15,7 (0.6) 0,86 (1.896) 1¼" 117, (4.6) 15,7 (0.6) 6,5 (.5),9 (.5) 4 x ø 15,7 (0.6) 1,17 (.579) 1½" 17 (5) 17,5 (0.9) 7, (.) 98,6 (.) 4 x ø 15,7 (0.6) 1,5 (.7) " 15,4 (6) 19,1 (0.75) 91,9 (.6) 10,7 (4.75) 4 x ø 19,1 (0.75),4 (5.5) ½" 177,8 (7),4 (0.) 104,6 (4.1) 19,7 (5.5) 4 x ø 19,1 (0.75),94 (8.6) " 190,5 (7.5),9 (0.941) 17 (5) 15,4 (6) 4 x ø 19,1 (0.75) 4,9 (10.87) ½" 15,9 (8.5),9 (0.941) 19,7 (5.5) 177,8 (7) 8 x ø 19,1 (0.75) 6,17 (1.6) 4" 8,6 (9),9 (0.941) 157, (6.9) 190,5 (7.5) 8 x ø 19,1 (0.75) 7 (15.4) 5" 54 (10),9 (0.941) 6" 79,4 (11) 5,7 (7.11) 5,4 (1) 15,9 (8.5) 15,9 (8.5) 41, (9.5) 8 x ø,4 (0.) 8 x ø,4 (0.) 8,6 (19.0) 11, (4.91) 1 Flanges according to DIN - EN - ASME - JIS - GOST Technical data 10-EN-10107
13 Dimensions DN D b d K L ~ kg 8" 4,9 (1.5) 8,4 (1.1) 69,7 (10.6) 98,5 (11.75) 8 x ø,4 (0.) 19,6 (4.1) 10" 6,4 (16) 0, (1.9),8 (1.75) 6 (14.5) 1 x- ø 5,4 (1) 8,8 (6.49) Tab. 1: Dimensions - ASME flange Class. All distance values in mm (in) Class 00 DN D b d K L ~ kg 1" 14 (4.) 17,5 (0.9),8 (),9 (.5) 4 x ø 19,1 (0.75) 1,9 (.064) 1¼" 1,4 (5.5) 19,1 (0.75) 6,5 (.5) 98,6 (.) 4 x ø 19,1 (0.75) 1,79 (.946) 1½" 155,4 (6.1) 0,6 (0.811) 7, (.) 114, (4.5) 4 x ø,4 (0.),66 (5.864) " 165,1 (6.5),4 (0.) 91,9 (.6) 17 (5) 8 x ø 19,1 (0.75), (7.011) ½" 190,5 (7.5) 5,4 (1) 104,6 (4.1) 149,4 (5.) 8 x ø,4 (0.) 4,85 (10.69) " 09,5 (8.48) 8,4 (1.1) 17 (5) 1,1 (6.6) 8 x ø,4 (0.) 6,81 (15.01) ½" 8,6 (9) 0, (1.9) 19,7 (5.5) 4, (7.5) 8 x ø,4 (0.) 8,71 (19.) 4" 54 (10) 1,8 (1.5) 157, (6.9) 00, (7.) 8 x ø,4 (0.) 11,5 (5.5) 5" 79,4 (11) 5,1 (1.8) 5,7 (7.11) 5 (9.5) 8 x ø,4 (0.) 15,6 (4.9) 6" 17,5 (1.5) 6,6 (1.441) 15,9 (8.5) 69,7 (10.6) 1 x- ø,4 (0.) 0,9 (46.08) 8" 81 (15) 41,1 (1.6) 69,7 (10.6) 0, (1) 1 x- ø 5,4 (1) 4, (75.6) 10" 444,5 (17.5) 47,8 (1.),8 (1.75) 87,4 (15.5) 16 x- ø 8,4 (1.1) 5, (117.5) Tab. 1: Dimensions - ASME flange Class 00. All distance values in mm (in) 10-EN Class 600 DN D b d K L ~ kg Flanges according to DIN - EN - ASME - JIS - GOST Technical data 1
14 Dimensions DN D b d K L ~ kg 1" 14 (4.) 17,5 (0.9),8 (),9 (.5) 4 x ø 19,1 (0.75) 1,6 (.57) 1¼" 1,4 (5.5) 0,6 (0.811) 6,5 (.5) 98,6 (.) 4 x ø 19,1 (0.75), (4.916) 1½" 155,4 (6.1),4 (0.) 7, (.) 114, (4.5) 4 x ø,4 (0.),5 (7.165) " 165,1 (6.5) 5,4 (1) 91,9 (.6) 17 (5) 8 x ø 19,1 (0.75) 4,15 (9.15) ½" 190,5 (7.5) 8,4 (1.1) 104,6 (4.1) 149,4 (5.) 8 x ø,4 (0.) 6,1 (1.51) " 09,6 (8.5) 1,8 (1.5) 17 (5) 1,1 (6.6) 8 x ø,4 (0.) 8,44 (.61) ½" 8,6 (9) 5,1 (1.8) 19,7 (5.5) 4, (7.5) 8 x ø 5,4 (1) 11 (4.5) 4" 7,1 (10.75) 8,1 (1.5) 157, (6.9) 15,9 (8.5) 8 x ø 5,4 (1) 17, (8.14) 5" 0, (1) 44,5 (1.75) 5,7 (7.11) 66,7 (10.5) 8 x ø 8,4 (1.1) 9,4 (64.8) 6" 55,6 (14) 47,8 (1.) 15,9 (8.5) 9,1 (11.5) 1 x- ø 8,4 (1.1) 6,1 (79.59) 8" 419,1 (16.5) 55,6 (.9) 69,7 (10.6) 49, (1.75) 1 x- ø 1,8 (1.5) 58,9 (19.9) 10" 8 (0) 6,5 (.5),8 (1.75) 41,8 (17) 16 x- ø 5,1 (1.8) 97,5 (15) Tab. 14: Dimensions - ASME flange Class 600. All distance values in mm (in) Class 900 DN D b d K L ~ kg 1" 149,4 (5.) 8,4 (1.1),8 () 101,6 (4) 4 x ø 5,4 (1),57 (7.871) 1¼" 158,8 (6.5) 8,4 (1.1) 6,5 (.5) 111, (4.8) 4 x ø 5,4 (1) 4,14 (9.17) 1½" 177,8 (7) 1,8 (1.5) 7, (.) 14 (4.) 4 x ø 8,4 (1.1) 5,75 (1.) " 15,9 (8.5) ½" 44,4 (9.6) 8,1 (1.5) 41,1 (1.6) 91,9 (.6) 104,6 (4.1) 165,1 (6.5) 190,5 (7.5) 8 x ø 5,4 (1) 8 x ø 8,4 (1.1) 10,1 (.7) 14 (0.86) 14 Flanges according to DIN - EN - ASME - JIS - GOST Technical data 10-EN-10107
15 Dimensions DN D b d K L ~ kg " 41, (9.5) 8,1 (1.5) 17 (5) 190,5 (7.5) 8 x ø 5,4 (1) 1,1 (8.9) 4" 9,1 (11.5) 44,5 (1.75) 157, (6.19) 5 (9.5) 8 x ø 1,8 (1.5) 6,9 (59.) 5" 49, (1.75),8 () 5,7 (7.11) 79,4 (11) 8 x ø 5,1 (1.8) 6,5 (80.47) 6" 81 (15) 55,6 (.19) 15,9 (8.5) 17,5 (1.5) 1 x- ø 1,8 (1.5) 47,4 (104.5) 8" 469,9 (.5) 6,5 (.5) 69,7 (10.6) 9,7 (15.5) 1 x- ø 8,1 (1.5) 8,5 (1.9) 10" 546,1 (1.5) 69,9 (.75),8 (1.75) 469,9 (.5) 16 x- ø 8,1 (1.5) 1 (69) Tab. 15: Dimensions - ASME flange Class 900. All distance values in mm (in) Class 0 DN D b d K L ~ kg 1" 149,4 (5.) 8,4 (1.1),8 () 101,6 (4) 4 x ø 5,4 (1),57 (7.871) 1¼" 158,8 (6.5) 8,4 (1.1) 6,5 (.5) 111, (4.8) 4 x ø 5,4 (1) 4,14 (9.17) 1½" 177,8 (7) 1,8 (1.5) 7, (.) 14 (4.) 4 x ø 8,4 (1.1) 5,75 (1.) " 15,9 (8.5) 8,1 (1.5) 91,9 (.6) 165,1 (6.5) 8 x ø 5,4 (1) 10,1 (.7) ½" 44,4 (9.6) 41,1 (1.6) 104,6 (4.1) 190,5 (7.5) 8 x ø 8,4 (1.1) 14 (0.87) " 66,7 (10.5) 47,8 (1.) 17 (5) 0, (8) 8 x ø 1,8 (1.5) 19,1 (4.11) 4" 11, (1.5) 5,8 (.1) 157, (6.19) 41, (9.5) 8 x ø 5,1 (1.8) 9,9 (65.9) 5" 74,7 (14.75) 7, (.) 5,7 (7.11) 9,1 (11.5) 8 x ø 41,1 (1.6) 58,4 (.8) 10-EN " 9,7 (15.5) 8" 48,6 (19) 8,6 (.5) 91,9 (.6) 15,9 (8.5) 69,7 (10.6) 17,5 (1.5) 9,7 (15.5) 1 x- ø 8,1 (1.5) 1 x- ø 44,5 (1.75) 71,8 (158.) 1 (69) Flanges according to DIN - EN - ASME - JIS - GOST Technical data 15
16 Dimensions DN D b d K L ~ kg 10" 584, () 108 (4.5),8 (1.75) 48,6 (19) 16 x- ø,8 () 10 (46) Tab. 16: Dimensions - ASME flange Class 0. All distance values in mm (in) Class 0 DN D b d K L ~ kg 1" 158,8 (6.5) 5,1 (1.8),8 () 108 (4.5) 4 x ø 5,4 (1) 4,96 (10.94) 1¼" 4, (7.5) 8,1 (1.5) 6,5 (.5) 10 (5.1) 4 x ø 8,4 (1.1) 7,5 (16.) 1½" 0, (8) 44,5 (1.75) 7, (.) 146,1 (5.75) 4 x ø 1,8 (1.5) 10,4 (.9) " 5 (9.5),8 () 91,9 (.6) 171,5 (6.75) 8 x ø 8,4 (1.1) 15,6 (4.9) ½" 66,7 (10.5) 57, (.5) 104,6 (4.1) 196,9 (7.75) 8 x ø 1,8 (1.5),6 (49.8) " 04,8 (1) 66,5 (.6) 17 (5) 8,6 (9) 8 x ø 5,1 (1.8) 4,8 (76.7) 4" 55,6 (14) 76, () 157, (6.) 7,1 (10.75) 8 x ø 41,1 (1.6) 5,9 (1.8) 5" 419,1 (16.5) 91,9 (.6) 5,7 (7.11),8 (1.75) 8 x ø 47,8 (1.) 90,8 (00.) 6" 48,6 (19) 108 (4.5) 15,9 (8.5), (14.5) 1 x- ø 5,8 (.1) 141 (10.9) 8" 55,5 (1.75) 17 (5) 69,7 (10.6) 48, (17.5) 1 x- ø 5,8 (.1) 14 (471.8) 10" 67,1 (6.5) 165,1 (6.5),8 (1.75) 59,8 (1.5) 1 x- ø 66,5 (.6) 411 (906.1) Tab. 17: Dimensions - ASME flange Class 0. All distance values in mm (in) 16 Flanges according to DIN - EN - ASME - JIS - GOST Technical data 10-EN-10107
17 .4 JIS flanges (B ) L 1 b b f f Dimensions d K D Fig. 4: Dimensions - JIS flange (Regular Flange) L Diameter of holes (number of holes) d Seal ledge diameter K Diameter of hole circle D Flange diameter b Total flange thickness f Seal ledge height 10 K DN D b K d f L 5 15 (4.91) 14 (0.551) 90 (.54) 67 (.) 1 (0.09) 4 x ø 19 (0.748) (1.6) 15 (5.15) 16 (0.6) (.97) 76 (.99) 4 x ø 19 (0.748) 1 (5.51) 16 (0.6) 105 (4.14) 81 (.9) 4 x ø 19 (0.748) 155 (6.10) 16 (0.6) 10 (4.74) 96 (.) 4 x ø 19 (0.748) 65 (.56) 175 (6.89) 1 (5.51) 116 (4.567) 4 x ø 19 (0.748) 80 (.15) 5 (7.84) 16 (4.961) 8 x ø 19 (0.748) (.97) 10 (8.) 175 (6.9) 151 (5.945) 8 x ø 19 (0.748) 15 (4.91) (9.84) 0 (0.7) 10 (8.) (7.165) 8 x ø (0.906) 80 (11.0) (9.449) 1 (8.47) 8 x ø (0.906) 10-EN (9.84) 0 (1.99) 0 (15.75) 4 90 (11.4) 55 (1.98) 6 (10.) 4 (1.76) 1 x ø (0.906) 1 x ø 5 Flanges according to DIN - EN - ASME - JIS - GOST Technical data 17
18 Dimensions DN D b K d f L (17.5) 4 0 (15.75) (14.49) 16 x ø 5 Tab. : Dimensions - JIS flange 10 K (B ) Regular Flange. All distance values in millimetres (in)..5 GOST flanges (GOST 15-80) d b D D1 D h Fig. 5: Dimensions - GOST flange (GOST 15-80, Modification 1) d Diameter of holes (number of holes) D Seal ledge diameter D1 Diameter of hole circle D Flange diameter b Total flange thickness h Seal ledge height PN 16 DN D D1 D b h d (4.58) 85 (.47) (.677) 1 (0.47) 4 x ø 14 (0.551) (1.6) 15 (5.15) (.97) (.071) 1 (0.51) (4.1) (.465) 1 (0.51) (6.99) 15 (4.91) 10 1 (0.51) 65 (.56) 0 (7.087) 1 (4.80) 15 (0.591) 80 (.15) 195 (7.677) (.97) 15 (8.465) (6.99) 0 (7.087) 1 (5.6) 158 (6.1) 17 (0.669) 17 (0.669) 8 x ø 8 x ø Flanges according to DIN - EN - ASME - JIS - GOST Technical data 10-EN-10107
19 Dimensions DN D D1 D b h d 15 (4.91) 45 (9.646) 10 (8.) 4 (7.44) 19 (0.748) 8 x ø 80 (11.0) (9.449) 1 (8.47) 19 (0.748) 8 x ø 00 5 (1.19) 95 (11.61) (10.55) 1 (0.87) 1 x ø (9.84) 5 (15.95) 55 (1.98) 0 (1.6) (0.906) 1 x ø 6 (1.04) Tab. 19: Dimensions - GOST flange PN 16. All distance values in mm (in) PN 5 DN D D1 D b h d (4.58) 85 (.47) (.677) 14 (0.551) 4 x ø 14 (0.551) (1.6) 15 (5.15) (.97) (.071) 16 (0.6) (4.1) (.465) 16 (0.6) (6.99) 15 (4.91) (0.669) 65 (.559) 0 (7.087) 1 (4.80) 19 (0.748) 8 x ø 80 (.15) 195 (7.677) (6.99) 1 (5.6) 19 (0.748) 8 x ø (.97) 0 (9.055) 190 (7.48) 158 (6.1) 1 (0.87) 8 x ø 15 (4.91) 70 (10.6) 0 (8.661) 4 (7.44) (0.906) 8 x ø 6 (1.04) 00 (9.84) 1 (8.47) 5 8 x ø 6 (1.04) (14.17) 10 (1.1) (10.95) 7 (1.06) 1 x ø 6 (1.04) (9.84) 45 (16.7) 70 (14.57) 5 (1.19) 9 (1.14) 1 x ø 0 (1.1) Tab. 0: Dimensions - GOST flange PN 5. All distance values in mm (in) 10-EN PN DN D D1 D b h d (4.58) 85 (.47) (.677) 14 (0.551) 4 x ø 14 (0.551) Flanges according to DIN - EN - ASME - JIS - GOST Technical data 19
20 Dimensions DN D D1 D b h d (1.6) 15 (5.15) (.97) (.071) 16 (0.6) (4.1) (.465) 16 (0.6) (6.) 15 (4.91) (0.669) 65 (.559) 0 (7.087) 1 (4.80) 19 (0.748) 8 x ø 80 (.15) 195 (7.677) (6.99) 1 (5.6) 1 (0.87) 8 x ø (.97) 0 (9.055) 190 (7.480) 158 (6.1) (0.906) 8 x ø 15 (4.91) 70 (10.6) 0 (8.661) 4 (7.44) 5 8 x ø 6 (1.04) 00 (9.84) 1 (8.47) 7 (1.06) 8 x ø 6 (1.04) (14.76) 0 (1.6) 85 (11.) 5 (1.) 1 x ø 0 (1.1) (9.84) 445 (17.5) 85 (15.16) 45 (1.58) 9 (1.55) 1 x ø (1.99) Tab. 1: Dimensions - GOST flange PN. All distance values in mm (in) PN 6 DN D D1 D b h d 5 15 (5.15) (.97) (.677) 0 (0.7) (1.6) (4.1) (.071) 1 (0.87) 4 x ø 165 (6.496) 15 (4.91) (.465) 1 (0.87) 4 x ø 175 (6.89) 15 (5.15) 10 (0.906) 4 x ø 65 (.559) 00 (6.99) 1 (4.80) 5 8 x ø 80 (.15) 10 (8.) 170 (6.69) 1 (5.6) 7 (1.06) 8 x ø (.97) 15 (4.91) (9.84) 95 (11.61) 00 (9.449) 158 (6.1) 4 (7.44) 9 (1.14) 8 x ø 6 (1.04) (1.) 8 x ø 0 (1.1) 0 Flanges according to DIN - EN - ASME - JIS - GOST Technical data 10-EN-10107
21 Dimensions DN D D1 D b h d (1.9) 80 (11.0) 1 (8.47) 5 (1.) 8 x ø (1.99) 00 5 (15.95) 45 (1.58) 85 (11.) 41 (1.614) 1 x ø 6 (9.84) 470 (.5) 0 (15.75) 45 (1.58) 45 (1.77) 1 x ø 6 Tab. : Dimensions - GOST flange PN 6. All distance values in mm (in) PN DN D D1 D b h d 5 15 (5.15) (.97) (.677) (1.6) (4.1) (.071) 4 x ø 165 (6.496) 15 (4.91) (.465) (0.906) 4 x ø 195 (7.677) x ø 6 (1.04) 65 (.56) 0 (8.661) 170 (6.69) 1 (4.80) 9 (1.14) 8 x ø 6 (1.04) 80 (.15) 0 (9.055) 0 (7.087) 1 (5.6) 1 (1.1) 8 x ø 6 (1.04) (.97) 65 (10.4) 10 (8.) 158 (6.1) 5 (1.) 8 x ø 0 (1.1) 15 (4.91) 10 (1.1) (9.84) 4 (7.44) 9 (1.55) 8 x ø (1.99) (1.) 90 (11.4) 1 (8.47) 4 (1.69) 1 x ø (1.99) 00 (16.9) 60 (14.17) 85 (11.) 51 (.008) 1 x ø 6 (9.84) 0 (19.69) (16.9) 45 (1.58) 57 (.44) 1 x ø 9 (1.55) Tab. : Dimensions - GOST flange PN. All distance values in mm (in) 10-EN Flanges according to DIN - EN - ASME - JIS - GOST Technical data 1
22 Pressure-Temperature-Charts Pressure-Temperature-Charts.1 Pressure-Temperature-Chart - EN flanges The values relate to flanges made of material 16L. PN RT 16 (.1) 5 (6.6) (580.) 6 (91.7) (14) C (1 F) 15,6 (6.) 4,4 (5.9) 9,1 (567.1) 61,1 (6.) 97,8 (1419) C (1 F) 14, (06), () 5,6 (516.) 56 (81.),9 (9) C (0 F) 1,8 (5.7) 0 (90.1) (464.1),4 (71) 80 (1) 00 C (9 F) 11,7 (169.7), (65.4) 9, (45) 46, (670.1) 7, (106) C (48 F) 10,9 (158.1) 17 (46.6) 7, (94.5) 4,8 (60.8) (986.) 00 C (57 F) 10, (149.4) 16,1 (.5) 5,8 (74.),6 (5.9) 64,4 (94) C (66 F) 9,9 (14.6) 15,4 (.4) 4,7 (58.) 8,9 (564.) 61,8 (896.) 0 C (75 F) 9,6 (19.) 15 (17.6) 4 (48.1) 7,8 (548.) 60 (870.) Tab. 4: Pressure-Temperature-Chart - EN flanges. All specifications in bar (psig) RT Temperature range C. Pressure-Temperature-Chart - ASME flanges The values relate to flanges made of material 16L. Class RT 15,9 (0.6) 41,4 (600.5) 8,7 () 14,1 (00) 06,8 (999) 44,7 (00) C (1 F) 15, (1.9) (580.) 80 (1) 10,1 (174) 00,1 (90),5 (487) C (1 F) 1, (19.9) 4,8 (4.7) 69,6 (1010) 104,4 (1514) 17,9 (5) 89,9 (5) C (0 F) 00 C (9 F) 1 (174.1) 1,4 (455.4) 6,8 (910.8) 94, (166) 157 (77) 61,6 (794) 11, (16.4) 9, (4.5) 58, (845.6) 87,5 (169),8 (115) 4 (54) Flanges according to DIN - EN - ASME - JIS - GOST Technical data 10-EN-10107
23 Pressure-Temperature-Charts Class C (48 F) 00 C (57 F) 5 C (617 F) C (66 F) 75 C (707 F) 0 C (75 F) 10,5 (15.) 7,5 (98.9) 54,9 (796.) 8,4 (1195) 17, (1991) 8,9 (0) 10 () 6,1 (.6) 5,1 (755.7), (114) 10, (90) 17, () 9, (14.9) 5,5 (69.9) 51 (79.7) 76,4 (8) 17,4 (48) 1, (079) 8,4 (11.8) 5,1 (64.1),1 (76.6) 75, (1091) 15,4 (19) 08,9 (00) 7,4 (107.) 4,8 (59.7) 49,5 (717.9) 74, (10) 1,8 (1796) 06, (99) 6,5 (94.8) 4, (5.4) 48,6 (704.9) 7,9 (1057) 11,5 (176) 0,5 (97) Tab. 5: Pressure-Temperature-Chart - ASME flanges. All specifications in bar (psig) RT Temperature range C. Pressure-Temperature-Chart - GOST flanges The values relate to flanges made of material 16L. PN 5 Temperature C (48 F) 00 C (57 F) C (66 F) 0 C (75 F) DN 5 (6.6) 5 (6.6) 5 (6.6) 5 (6.6) DN 15 5 (6.6) 5 (6.6) 5 (6.6) 5 (6.6) DN 5 (6.6) 9,4 (571.5) 5 (6.6) 5 (6.6) DN 00 5 (6.6) 5 (6.6) 5 (6.6) 5 (6.6) DN 5 (6.6) 5 (6.6) 5 (6.6) 4,9 (61.1) Tab. 6: Pressure-Temperature-Chart - GOST flanges PN 5. All specifications in bar (psig) PN Temperature C (48 F) 00 C (57 F) C (66 F) 0 C (75 F) DN (580.) (580.) (580.) 9,5 (57.9) DN 15 (580.) (580.) 9,5 (57.9) 8,4 (557) 10-EN DN (580.) 9,4 (571.5) 7,7 (546.8) 6,7 (5.) DN 00 (580.) (580.) (580.) (580.) DN 9, (5.6) 7, (59.5) 5,7 (517.8) 4,6 (1.8) Flanges according to DIN - EN - ASME - JIS - GOST Technical data
24 Pressure-Temperature-Charts Tab. 7: Pressure-Temperature-Chart - GOST flanges PN. All specifications in bar (psig) PN 6 Temperature C (48 F) 00 C (57 F) C (66 F) 0 C (75 F) DN 6 (91.7) 6 (91.7) 6 (91.7) 6 (91.7) DN 15 6 (91.7) 6 (91.7) 6 (91.7) 6 (91.7) DN 6 (91.7) 6 (91.7) 6 (91.7) 6,5 (906.5) DN 00 6 (91.7) 6 (91.7) 60,7 (0.4) 59 (855.7) DN 6 (91.7) 60, (874.6) 57,8 (.) 56, (815.1) Tab. 8: Pressure-Temperature-Chart - GOST flanges PN 6. All specifications in bar (psig) PN Temperature C (48 F) 00 C (57 F) C (66 F) 0 C (75 F) DN (14) (14) (14) 98 (141) DN 15 (14) (14) 97,8 (1419) 94,9 (176) DN 99,7 (1446) 94,5 (171) 90,6 (114) (176) DN 00 (14) 96,6 (11) 9,6 (14) 90 (105) DN 94, (1) 89,4 (197) 85,7 (14) 8, (107) Tab. 9: Pressure-Temperature-Chart - GOST flanges PN. All specifications in bar (psig) PN Temperature C (1 F- ) C (0 F- ) 00 C (9 F- ) C (48 F- ) 00 C (57 F- ) C (66 F 0 C (75 F) DN (1) (1) 15,5 (6) 14, (064) 14,9 (1957) 19, (75) 15,6 () DN 65 (1) (1) 15,8 (16) 141,7 (055) 14, (1946),7 (67) 15 (1) DN 80 (1) (1) 154,6 (4) 14,4 (080) 15,9 (1971) 10, (90) 15,6 () DN (1) DN (48) DN (1) 146, (11) 1, (0) 151 (190) 14,0 (1944),5 (64),4 (007) 14, (0) 119, (179), (61) 117,8 (1709) 11,9 (1) 11,6 (1764) 11,9 (1) 108, (1571) 116,6 (1691) 109,7 (1591) 105,1 (154) 11, (164) 4 Flanges according to DIN - EN - ASME - JIS - GOST Technical data 10-EN-10107
25 Pressure-Temperature-Charts Temperature C (1 F) C (0 F) 00 C (9 F) C (48 F) 00 C (57 F) C (66 F 0 C (75 F) DN 00 (1),6 (4) (00) (57) 11, (1759) 116, (17) 11,9 (1) DN 157,8 (89) 14,7 (070) 10,8 (97) 11, (1759) 115 (16), (1598) 107 (155) Tab. 0: Pressure-Temperature-Chart - GOST flanges PN. All specifications in bar (psig) 10-EN Flanges according to DIN - EN - ASME - JIS - GOST Technical data 5
26 Pressure-Temperature-Charts 6 Flanges according to DIN - EN - ASME - JIS - GOST Technical data 10-EN-10107
27 Pressure-Temperature-Charts 10-EN Flanges according to DIN - EN - ASME - JIS - GOST Technical data 7
28 Printing date: VEGA Grieshaber KG Am Hohenstein Schiltach Germany Phone Fax ISO 9001 All statements concerning scope of delivery, application, practical use and operating conditions of the sensors and processing systems correspond to the information available at the time of printing. VEGA Grieshaber KG, Schiltach/Germany 010 Subject to change without prior notice 10-EN-10107
Supplementary instructions. Centering. for VEGAFLEX series 80. Document ID: 44967
Supplementary instructions Centering for VEGAFLEX series 80 Document ID: 44967 Contents Contents 1 Product description 1.1 Overview... 3 1.2 Centerings... 3 2 Mounting 2.1 General instructions... 10 2.2
More informationSupplementary instructions. Water cooling - MINITRAC 31. Active water cooling system for radiationbased. Document ID: 48522
Supplementary instructions Water cooling - MINITRAC 31 Active water cooling system for radiationbased sensors Document ID: 48522 Contents Contents 1 Product description... 3 1.1 Configuration... 3... 4
More informationSupplementary instructions. Mounting accessories, pressure measurement technology. Document ID: 43478
Supplementary instructions Mounting accessories, pressure measurement technology Document ID: 78 Contents Contents About this document.... Function.... Target group.... Symbols used... For your safety....
More informationSupplementary instructions. Air cooling - FIBERTRAC 31 with Conduit tube connection. Active air cooling system for radiation-based sensors
Supplementary instructions Air cooling - FIBERTRAC 31 with Conduit tube connection Active air cooling system for radiation-based Document ID: 52847 Contents Contents 1 Product description 1.1 Configuration...
More informationSupplementary instructions. Connection cable IP 66/IP 68 (1 bar) Retrofitting set/accessory for instruments of the plics family. Document ID: 34107
Supplementary instructions Connection cable IP 66/IP 68 (1 bar) Retrofitting set/accessory for instruments of the plics family Document ID: 4107 Contents Contents 1 For your safety... 1.1 Appropriate use...
More informationSupplementary instructions. Air cooling - FIBERTRAC 31. Active air cooling system for radiation-based sensors. Document ID: 50339
Supplementary instructions Air cooling - FIBERTRAC 31 Active air cooling system for radiation-based sensors Document ID: 50339 Contents Contents 1 Product description 1.1 Configuration... 3 2 Mounting
More informationA type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
More informationSupplementary instructions. Mounting bracket KV 31. For tubes with ø mm Horizontal sensor mounting. Document ID: 41407
Supplementary instructions Mounting bracket KV 31 For tubes with ø 200 400 mm Horizontal sensor mounting Document ID: 41407 Contents Contents 1 Product description 1.2 High temperatures... 4 2 Mounting
More informationSupplementary instructions. Mounting bracket KV 31. For tubes with ø mm 30 diagnonal irradiation. Document ID: 41863
Supplementary instructions Mounting bracket KV 31 For tubes with ø 50 100 mm 30 diagnonal irradiation Document ID: 41863 Contents Contents 1 Product description 2 Mounting 3 Supplement 3.1 Technical data...
More informationSafety instructions VEGAVIB VB6*.GI**C/R/T/Z/N*** IECEx BVS Ex ta, ta/tb, tb IIIC T Da, Da/Db, Db IP66
Safety instructions VEGAVIB VB6*.GI**C/R/T/Z/N*** IECEx BVS 06.0001 Ex ta, ta/tb, tb IIIC T Da, Da/Db, Db IP66 Contents 1 Area of applicability... 3 2 General information... 3 3 Technical data... 3 4 Application
More informationLevel measurement Guided microwave Product Information VEGAFLEX ma/hart. Level Switching Pressure
Level measurement Guided microwave Product Information VEGAFLEX 62 4 20 ma/hart Level Switching Pressure 2 VEGAFLEX 62 4 20 ma/hart Contents Contents 1 Product description...4 1.1 Configuration... 4 1.2
More informationSupplementary instructions Heating for the display and adjustment module PLIC- SCOM
Supplementary instructions Heating for the display and adjustment module PLIC- SCOM Document ID: 31708 Contents Contents 1 About this document 1.1 Function... 3 1.2 Target group... 3 1.3 Symbols used...
More informationOperating Instructions. VEGASWING 61, 63 with oscillator SW E60N (EX)
Operating Instructions VEGASWING 61, 63 with oscillator SW E60N (EX) Contents Contents Safety information... 2 Note Ex area... 2 1 Product description... 3 2 Function and application... 4 2.1 Principle
More informationTwo-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
More informationDifferential Pressure Gauges (701P Series)
Applications Equipped two Process Connections Indicating low and high pressure Measuring differential pressure as well as liquid or flow levels Recommended to use 3-way & 5-way valve manifold Pressure
More informationTwo-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationType. Type 457, , 458. Flanged Safety Relief Valves spring loaded
Type Type 458 Packed lever H4 Closed bonnet Conventional design 457, 458 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Materials Conventional design 09/02 Balanced bellows design 09/04
More informationTwo-Way Metal Seated Ball Valve Type 16-R
Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationProduct information. Capacitive. Level measurement in bulk solids VEGACAL 62 VEGACAL 65 VEGACAL 66 VEGACAL 67. Document ID: 30139
Product information Level measurement in bulk solids VEGACAL 6 VEGACAL 65 VEGACAL 66 VEGACAL 67 Document ID: 09 Contents Contents Description of the measuring principle... Type overview... 5 Housing overview...
More informationOperating Instructions VEGAMIP T61. Emitting unit. Document ID: 36998
Operating Instructions VEGAMIP T61 Emitting unit Document ID: 36998 2 Contents Contents 1 About this document... 4 1.1 Function... 4 1.2 Target group... 4 1.3 Symbols used... 4 2 For your safety... 5 2.1
More informationType 455, 456. Type 455, 456. Flanged Safety Relief Valves spring loaded
Type 455, 456 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Type 456 Packed lever H4 Closed bonnet Materials 08/02 Balanced bellows design 08/04 How to order Numbering system 08/06 Article
More informationMaterials : Cast iron
Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 200 Flanges ISO PN16-10 C + 300 C Max Pressure : 16 Bars Specifications : Rising rotating stem and handwhell Bolted bonnet and gland packing
More informationEXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
More informationWESAN WP 222. Bulk Water Meter Woltman
APPLICATION The bulk water meter WESAN WP can be used for measuring the flow (cold water up to 30 C) in supply lines with high flow at low pressure loss. FEATURES 4 For horizontal and vertical installation
More informationTwo-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
More informationRef FIRE SAFE BALL VALVE ISO PN50 ANSI Model/Ref:
FIRE SAFE BALL VALVE ISO PN50 ANSI 300 Model/Ref: 768-769 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN50 ANSI300 R.F. Flanges -50 C in
More informationProduct information. Differential pressure. Mechanical and electronic differential pressure measurement
Product information Mechanical and electronic differential pressure measurement VEGADIF 85 VEGABAR 8 VEGABAR 8 VEGABAR 8 VEGABAR 86 VEGABAR 87 Document ID: 65 Contents Contents Measuring principle... Type
More information2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 756-757 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN20 ANSI150 R.F. Flanges -50 C in SS and -29 C
More informationType 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
More informationStrainer PN 25/40 DN
Type series booklet 7127.1/9-10 NORI 40 Strainer with drain plug flanged or with butt weld ends Type FSL Type FSS PN 25/40 DN 15-300 Fields of Application In heat transfer plants, industrial plants, building
More informationSINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
More informationASBESTOS/NON-ASBESTOS GASKET Style No:TFG. The Flat Gaskets are the most typical ones from the family of flat static gaskets
ASBESTOS/NON-ASBESTOS GASKET Style No:TFG The Flat Gaskets are the most typical ones from the family of flat static gaskets They are used in a large number by various industries and in a variety of applications
More informationSINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
More informationMaterials : Carbon steel or stainless steel
Size : Ends : Max Temperature : DN 15 to 600 mm Flanges PN10/16/25/40 + 150 C for flange gaskets, 200 C for flanges Max Pressure : 40 Bars for flanges PN40 Specifications : Welding flanges Flat flanges
More informationIN-LINE DISC & PISTON VALVES
ID & IP Series IN-LINE DISC & PISTON VALVES PROCESS VALVES IN-LINE DISC & PISTON VALVES M Seal In-Line Piston Valve Code: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded
More informationStop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C)
ARI-EURO-WEDI Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI - Fig. 070 Page 2 ARI-EURO-WEDI - Fig. 071 Page 2 Fig. 070 ARI-EURO-WEDI - Hood valve Fig.
More informationTechnical Information
Technical Information Materials ISO- Code Material Colour Operating Temperature PA Polyamide Light grey PP PP-EL natural PP PVDF PVDF-EL PFA PTFE PTFE-EL PEEK Polypropylene Polypropylene Polypropylene
More informationYARWAY NARVIK MODEL 88 SPID SMALL PIPE INLINE DESUPERHEATER
A wide range of desuperheaters, pneumatic actuators, strainers to satisfy all specifications of the power, pulp and paper industry and process gas applications FEATURES Fabricated construction Special
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
More informationGlobe Valve, Metal. Sectional drawing
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
More informationHigh Temperature Valve 8024
High Temperature Valve 8024 with integrated positioner GS 3 series DN15 up to DN250 Pneumatic control valve with integrated positioner for the control of neutral through to highly aggressive media Space
More informationSTAAL 100 Swing check valves PN DN Applications Standard Variants Operating Data Materials Additional Information Purchase Order Data
Type series booklet 7371.1/10-10 STAAL 100 Swing check valves with bolted cover flanged or with butt weld ends AKK AKKS PN 63-100 DN 80-400 Applications In industrial plants, power stations, process and
More informationType. 437 Safety Relief Valves spring loaded
Type Packed knob H4 437 Safety Relief Valves spring loaded Packed knob H4 Flanged connection Cap H2 Contents Chapter/Page Materials Available designs 01/02 Available designs materials 01/03 How to order
More informationSAFE - ANSI. Angle pattern safety valve 1 to 6 (DN 25 to 150) Safety valves ARI-SAFE-ANSI
SAFE - ANSI Safety valves Angle pattern safety valve 1 to 6 (DN 25 to 150) ARI-SAFE-ANSI ASME Code Section VIII-Division 1. UV-stamp NB-stamp Type-test approved acc. to TRD and AD2000-A2 Direct loaded
More informationNORI 40 RXL/RXS. Type Series Booklet
Non-return Valve NORI 40 RXL/RXS PN 25/40 DN 10-300 Flanged/Butt Weld Ends or Socket Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet NORI 40 RXL/RXS KSB Aktiengesellschaft
More informationHD series. HD Series 1 technical data 1 components DN RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4
HD series double eccentric HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 tables dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes
More informationPISTON DIVERTER VALVES
DP Series DIVERTER VALVES PISTON DIVERTER VALVES PROCESS VALVES STRAHMAN DEAD SPACE FREE DIVERTER VALVES Piston Diverter Valves Code: DPS4 Standard branch angles: 45 o and 90 o 60 o and specific angles
More informationBonded Liner Butterfly Valve Double Flanged Type Series 150
Year : Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Design Technical Data Description : GV
More informationThree-Way Metal Seated Ball Valve Type 21-M
Three-Way Metal Seated Ball Valve Type 21-M Design Characteristics Split body Trunnion mounted ball with - or T-port and integral stem ive loaded stem packing Spring loaded seat system Fire Safe design
More informationThe EPSILON is based on the principle of measuring velocity in the pipe line, therefore the flow measurement is volumetric.
Typical Applications EPSILON Flowmeter The EPSILON flow meters measure the flow of most liquids and gases within the process industries, including chemical, petro-chemical, pharmaceutical and the power
More informationMultiway Ball Valve with Vertical In-/Outlet Metal Seated. Type 24-M. Approvals
Multiway Ball Valve with Vertical In-/Outlet Metal Seated Type 24-M Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe
More informationARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
More informationJUMO flowtrans DP R. Meter run R01 and orifice plate R02. Applications. Brief description. Special features. Customer benefits.
Page 1/8 JUMO flowtrans DP R and orifice plate R02 Applications For the flow measurement of single-phase aggressive and non-aggressive gases, steam, and liquids In nominal widths up to DN 40 designed as
More informationData Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
More informationVERTICAL MULTISTAGE PUMPS SSV-F Hz
VERTICAL MULTISTAGE PUMPS SSV-F 1-3 - 6-1 - 15 5Hz TABLE OF HYDRAULIC PERFORMANCES AT 5Hz PUMP TYPE RATED POWER H1 Q = DELIVERY l/min 8,3 16,7, 33,3 2 5, 58,3 67 75, m³/h,5 1 1,5 2 2,5 3 3,5,5 kw HP Bar
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationSTAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES
STAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES STAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES modules in industrial design 52 mm 41 mm 25.4 mm Membrane diameter Membrane design 7/6 19/3.3 37/2 19/6 37/3.8
More informationMaterials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" to 8" ) ISO PN50 ANSI 300 R.F. - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire safe BS 6755-2
More information10.1 Introduction Connections Overview
Content 10.1 Introduction...10.1-1 10.2 Connections Overview...10.2-1 10.2.1 Pressure/Temperature Rating of Connection versus Safety Valve...10.2-1 10.2.2 Flanged Connections...10.2-1 10.2.3 Threaded Connections...10.2-2
More informationSeries 812. TÜV/CE atmospheric discharge safety valves for industrial applications. Air, gases and vapours
TÜV/CE atmospheric discharge safety valves for industrial applications Series 812 4.4 812 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases and vapours
More informationTechnische Dokumentation Technical Documentation
Technische Dokumentation Technical Documentation XOMOX Fully Lined Check Valves Dok. Nr.: tdb_check_gb XOMOX International GmbH & Co. Von-Behring-Straße 15 D-88131 Lindau / Deutschland Januar 2008 Table
More informationMaterials : Carbon steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2 to 16 ) Flanges R.F. Class 300 (PN50) - 29 C + 425 C Max Pressure : 50 Bars Specifications : Swing check valve Bolted bonnet Vertical
More informationNON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
More informationGESTRA DISCO Non-Return Valves RK 41, PN 16. Non-Return Valves PN 6/10/16 DN (½ 8") RK 41, PN 16. Application for liquids, gases, vapours.
GESTRA DISCO Non-Return Valves RK 41, PN 16 Gestra Steam Systems GESTRA Non Return Valves RK 41 PN 6/10/16 15-200 (1/2" - 8") Issue Date: 8/01 Non-Return Valves PN 6/10/16 15 200 (½ 8") RK 41, PN 16 A2
More information94D / 94F / 94M / 96M
94D / 94F / 94M / 96M - 2016 1 Meter Runs MBL 500 Application Meter runs combine inlet and outlet piping with a flow element which is used for flow measurement of one-phase aggressive and non-aggressive
More informationSTEEMCO Flowmeter for Steam
STEEMCO Flowmeter for Steam Typical Applications The STEEMCO flow meters measure the flow of saturated and superheated steam within the process industries, including chemical, petro-chemical, pharmaceutical
More informationWESAN WP WOLTMAN METER
WESAN WP WOLTMAN METER APPLICATION The bulk water meter WESAN WP can be used for measuring volumes of cold water (up to 50 C) in supply lines with high flow at low pressure loss. The measuring chamber
More informationControl Valve fluids with integrated positioner. GS 3 series - DN 15 up to DN 250. material
Control Valve 8021 with integrated positioner GS 3 series - DN 15 up to DN 250 Pneumatic control valve for the control of neutral and aggressive fluids with integrated positioner Space saving wafer type
More informationOperating Instructions VEGACAP 63. Capacitive rod electrode for level detection. Contactless electronic switch. Document ID: 30009
Operating Instructions Capacitive rod electrode for level detection VEGACAP 63 Contactless electronic switch Document ID: 30009 2 Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group...
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
More informationType 459. Type. 459 Safety Relief Valves spring loaded
Type Plain lever H3 459 Safety Relief Valves spring loaded Contents Chapter/Page Cap H2 Materials Available designs 05/02 Available designs materials 05/03 How to order Numbering system 05/04 Article numbers
More informationCONA ANSI Further components / Accessories
CONA ANSI Further components / Accessories Liquid drainer ANSI150 / 300 - with flanges (Fig. 665...1) - with screwed sockets (Fig. 665...2) - with socket weld ends (Fig. 665...3) - with butt weld ends
More informationMaxifluss Rotary Plug Valve. VETEC Type Double eccentric control valve for process engineering and industrial applications
Maxifluss Rotary Plug Valve VETEC Type 73.7 Double eccentric control valve for process engineering and industrial applications Valve size DN 25 to DN 5 NPS 1 to NPS 2 Nominal pressure PN 63 to PN 16 ANSI
More informationModel 7A00 7A00 - TB TECHNICAL BULLETIN. Detonation Flame Arrestor
TECHNICAL BULLETIN 7A00 - TB 0-7 ISO Registered Company Model 7A00 Detonation Flame Arrestor OBJECTIVE The Model 7A00 detonation flame arrestor is a device that can be fitted to the opening of an enclosure
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
More informationDIN /DIN Aseptic Flange Union for DIN 11866/11850 Tube
/ Aseptic Flange Union for DIN 11866/11850 Tube / Aseptic Flange Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
More informationLiquid filters _ 302. Deaerators. Product Bulletin
Liquid filters Deaerators _ 32 Product Bulletin WWW.VAF.NL Introduction VAF Instruments liquid filters/deaerators are used in combination with VAF flowmeters. The use of liquid filters protects downstream
More informationORIMAS Mass Flowmeter
Typical Applications ORIMAS Mass Flowmeter The ORIMAS mass flow meters measure the mass flow of most liquids and gases within the process industries, including chemical, petro-chemical, pharmaceutical
More informationBALL VALVE ASSEMBLY AND MAINTENANCE PROCEDURE. REF. DOC.MMM500E Rev. 10 May 2011 SFF & SFR SERIES SFF / SFR. Page 1 of 210
SFF & SFR SERIES SFF / SFR EN/ANSI/ASME/API/BS/NF SFF EN/DIN/BS/NF Page 1 of 210 REVIEW CONTROL PROCEDURE REF.: DOC.MMM500E REV. DATE CARRIED OUT BY APPROVED BY DESCRIPTION 0 12/03/2001 C. Gallardo J.
More informationSeries 240 Types PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve
Series 240 Types 3241-1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve ANSI version Application Control valves for PSA plants (Pressure Swing Adsorption) s NPS ½ to 6 Pressure rating
More informationOperating Instructions VEGACAP 63. Capacitive rod electrode for level detection. Transistor (NPN/PNP) Document ID: 30010
Operating Instructions Capacitive rod electrode for level detection VEGACAP 63 Transistor (NPN/PNP) Document ID: 30010 2 Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4
More informationFLANGES PRODUCT: STANDARD FLANGE CLASSIFICATION: PRESSURE CLASS CLASIFICATION:
FLANGES Gestión de Compras manufactures and supplies flanges according to standards ANSI, BS, DIN, JIS and ISO as well as according to customer specifications. PRODUCT: Flanges are a pipe fitting which
More informationUNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
More informationMADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C Max Pressure : 20 Bars Specifications : ISO 5211
More informationSITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
More informationPressure measurement. Process pressure VEGABAR 14 VEGABAR 17. Product Information
Pressure measurement Process pressure VEGABAR 4 VEGABAR 7 Product Information Contents Contents Description of the measuring principle........................................................... Type overview..............................................................................
More informationTRUNNION MOUNTED BALL VALVES
TRUNNION MOUNTED BALL VALVES COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual production
More informationType / Material code Body* Disc Stem Lining**
Design butterfly valve is designed with lug or flange connection. Lug connection in dimensions DN 32-300, flange connecton DN 300-1000. is available in pressure ratings PN 10 /16 according to dimension.
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationSize : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C 20 Bars ISO 5211 mounting pad PTFE filled
More informationThermowell for temperature sensors omnigrad M TW 13
Technical information TI 264T/02/en 60019743 Thermowell for temperature sensors omnigrad M TW 13 Pipe thermowell Flanged process connection Omnigrad M TW 13 thermowells are designed for the use in the
More informationItem Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
More informationBall Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges
Ball Valve VM 4460-4466 steel or stainless steel DN 15-200 PN 100/40 flanges General 2-piece ball valve with a unique sealing element design. Modular selection of system components. Supports pressurization
More informationMicro Motion T-Series Straight-Tube Mass Flow and Density Meters. Product Data Sheet PS July 2001
Micro Motion T-Series Straight-Tube Mass Flow and Density Meters Product Data Sheet PS-00371 July 2001 Micro Motion T-Series Straight-Tube Meters Micro Motion is proud to offer you the first single-straight-tube
More informationSeries 240 Pneumatic Control Valve Type DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA
Series 240 Pneumatic Control Valve Type 3241-1 DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA ANSI version Application Control valve for PSA plants (Pressure Swing Adsorption) (German: DWA) NPS ½ to 6 Pressure
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
More information