strana / page
|
|
|
- Ashley James
- 6 years ago
- Views:
Transcription
1
2 Sadržaj / Content: Čelične bešavne cevi / Seamless steel pipes Čelične šavne cevi / Welded steel pipes Sprinkler cevi / Sprinkler pipes Cevni lukovi / Elbows Koncentrične redukcije / Reducers concentric Kape (danca) / Caps T-komadi / Tees equal Prirubnice sa grlom / Neck flanges Ravne prirubnice / Flat flanges ANSI prirubnice strana / page Rumenački put Rumenka tel/fax: (021) , , , pezos@pezos.co.rs
3 Čelične bešavne cevi / Seamless steel pipes Oblik i mere / Dimensional standards EN 10220:2002 ISO 4200:1991 DIN 2448:1981 ASME B36.10M:2000 GOST 8732:197 ČSN :1981 ČSN :1981 KN :1997 Tehnički uslovi za isporuku čeličnih bešavnih cevi / Technical delivery regulations for tubes and pipes of carbon steel EN : A1:2004 EN 10224: A1:2005 EN :2003 DIN 1629:1984 DIN 1630:1984 DIN :1984 ASTM A 53: ASME SA 53:2007 ASTM A 501:2007 ASTM A 519:2006 GOST 8731:1974 ČSN :1988 ČSN :1990 NF A :1987 Cevi za povišene temperature / For tubes and pipes of high -grade carbon steel for boilers EN ,2:1997, 1996 EN ,2:2006 EN : A2:2007 EN :2002 +A1:2004 DIN 17175:1979 ASTM A 106: ASME SA 106:20 ASTM A 192:2002 ASTM A 210:2002 ASTM A 333: ASME SA 333:2007 ASTM A 530: ASME SA 530M:2007 ASTM A 450:2004 ČSN :1989 NF A :1989 KN :1997 Kvalitet čelika / Steel Grades EN ,2:1997, 1996 EN ,2:2006 EN , 2, 3: A1:2004 EN 10224: A1:2005 L210GA, L235GA, L 245GA, L290GA, L360GA, L245NB, L290NB, L360NB, L415NB S235JRH, S275JOH, S275J2H, S355JOH, S355J2H, S275NH1, S355NH1 EN :2003 DIN 1629:1984 St 37.0, St 44.0, St 52.0 DIN 1630:1984 St 37.4, St 44.4, St 52.4 DIN 17121:1984 RSt 37 2, St 37 3, St 44 2, St 44 3, St 52 3 DIN 17175:1979 Grade I St 35.8, St 45.8 ASTM A 53:2006, ASTM A 106:2006 A, B ASTM A 333:2005 Gr. 1, Gr. 6 ASTM A 192:2002 Grade acc. to ASTM A 192 ASTM A 210:2002 A-1 P195TR1, P195TR2, P235TR1, P235TR2, P265TR2, P195GH, P235GH, P265GH, P355N, P355NH1, L235, L275, L355 E235, E275, E315, E355, E275K21, E355K21 ASTM A 501:2007 Gr A, Gr B ASTM A519:2006 MT 1010, MT 1015, MT 1020, 1010,1012, 1015, 1017, 1020, 1518 GOST 8731: , 20, St2, St4 ČSN : , , , , , , , , ,
4 Čelične bešavne cevi / Seamless steel pipes 2 EN /2 Spoljni prečnik Debljina zida (mm) mm inch Težina (kg/m) /4" /8" /2" /4" " /4" /2" " /2" " " " " " " " " "
5 Čelične bešavne cevi / Seamless steel pipes ANSI / ASME B36.10M (API 5L) 3
6 Čelične bešavne cevi / Seamless steel pipes ANSI / ASME B36.10M (API 5L) STD XS STD XS STD XS STD STD XS STD XS
7 Čelične bešavne cevi / Seamless steel pipes Uporedna tabela standarda / Comparative table of standards 5
8 Čelične šavne cevi / Welded steel pipes 6 EN /2 I EN Spoljni prečnik Debljina zida (mm) mm inch Težina (kg/m) /8" /2" /4" " /4" /2" " /2" " " " " " " " " " (559) (660)
9 Sprinkler cevi / Easy flow sprinkler pipes Easy Flow Light Wall SCH 10 SCH 30/40 TECHNICAL SPECIFICATIONS Uncoated Unit Galvanised Roll Grooved, O.D. O.D. W.T. W.T. Weight Unit Weight FM approved, FM (mm) (inches) (mm) (inches) (kg/m) (lb/ ) (kg/m) UL/C-UL Listed, 33,7 1" 2 0,079 1,56 1,05 1,62 X NFS cer fied, 33,7 1" 2,6 0,102 1,99 1,34 2,06 X Selec on of Schedule 7, 42,4 1 1/4" 2 0,079 1,99 1,34 2,06 X Schedule 10, Schedule 30/40, 42,4 1 1/4" 2,3 0,091 2,27 1,53 2,35 X Easy Flow - Light Wall, 42,4 1 1/4" 2,6 0,102 2,55 1,71 2,64 X ASTM A 795 and ASTM A 53 48,3 1 1/2" 2 0,079 2,28 1,53 2,36 X produc on standards, 48,3 1 1/2" 2,6 0,102 2,93 1,97 3,03 X Tight tolerances, 60,3 2" 2 0,079 2,88 1,94 2,98 X Consistent roundness, 60,3 2" 2,9 0,114 4,1 2,76 4,25 X Consistent wall thickness, 76,1 2 1/2" 2,18 0,086 3,97 2,67 4,11 X Consistent straightness, 76,1 2 1/2" 2,9 0,114 5,23 3,51 5,42 X Standard length 21 feet, 88,9 3" 2,36 0,093 5,04 3,39 5,21 X Weldable, 88,9 3" 3,2 0,126 6,76 4,54 7 X Pressure tested, 114,3 4" 2,6 0,102 7,16 4,81 7,41 X Reliable high steel quality, 114,3 4" 3,6 0,142 9,83 6,61 10,17 X Galvanised of shop primer 139,7 5" 3,4 0,134 11,43 7,68 11,83 X coated black, red (RAL 3009) or grey (RAL 7012), CE, PED Cer fied. Nominal OD Wall Wall Weight DN Sizes (mm) Thickness Thickness Plain End UL FM (inches) (inches) (mm) (lb/ ) (kg/mt) 20 3/4" 26,7 0,083 2,11 0,86 1,28 X 25 1" 33,4 0,109 2,77 1,41 2,09 X X /4" 42,2 0,109 2,77 1,81 2,69 X X /2" 48,3 0,109 2,77 2,09 3,11 X X 50 2" 60,3 0,109 2,77 2,64 3,93 X X /2" 73,0 0,120 3,05 3,53 5,26 X X 80 3" 88,9 0,120 3,05 4,34 6,46 X X /2" 101,6 0,120 3,05 4,98 7,41 X X 100 4" 114,3 0,120 3,05 5,62 8,37 X X 125 5" 141,3 0,134 3,40 7,78 11,58 X X 150 6" 168,3 0,134 3,40 9,30 13,85 X X 200 8" 219,1 0,148 3,76 13,41 19,97 X X " 273,1 0,165 4,19 18,67 27,78 X X 15 1/2" 21,3 0,109 2,77 0,85 1,27 X 20 3/4" 26,7 0,113 2,87 1,13 1,69 X 25 1" 33,4 0,133 3,38 1,68 2,50 X X /4" 42,2 0,140 3,56 2,27 3,39 X X /2" 48,3 0,145 3,68 2,72 4,05 X X 50 2" 60,3 0,154 3,91 3,66 5,45 X X /2" 73,0 0,203 5,16 5,80 8,64 X X 80 3" 88,9 0,216 5,49 7,58 11,29 X X /2" 101,6 0,226 5,74 9,12 13,58 X X 100 4" 114,3 0,237 6,02 10,80 16,09 X X 125 5" 141,3 0,258 6,55 14,63 21,79 X X 150 6" 168,3 0,280 7,11 18,99 28,29 X X 200 8" 219,1 0,277 7,04 24,72 36,82 X X " 273,1 0,307 7,80 34,27 51,05 X X 7
10 Cevni lukovi / Elbows EN Type A / DIN
11 Cevni lukovi / Elbows ASME / ANSI B16.9 9
12 Cevni lukovi / Elbows ASME / ANSI B
13 Koncentrične redukcije / Reducers concentric EN Type A / DIN
14 Koncentrične redukcije / Reducers concentric ASME / ANSI B
15 Koncentrične redukcije / Reducers concentric ASME / ANSI B
16 Kape (danca) / Caps EN Type A / DIN 2617 ASME / ANSI B
17 T-komadi / Tees equal EN Type A / DIN
18 T-komadi / Tees equal ASME / ANSI B
19 T-komadi / Tees equal ASME / ANSI B
20 Prirubnice sa grlom / Neck flanges 18
21 Ravne prirubnice / Flat flanges EN Type 01 / DIN 2573 PN6 EN Type 01 / DIN 2576 PN16 19
22 Prirubnice Slip-on i prirubnice sa grlom/ Flanges Slip-on & welding neck 150 lbs ASME B 16.5 Sizes Drilling Slip On Welding neck DN NPS O C(min) R K Number G d B(min) X Y Weight A Y1 Weight mm mm mm mm mm mm mm mm mm kg mm mm kg 15 1/2" 89 11,2 34,9-4 60,3 15,8 22, ,8 21,3 48 0,6 20 3/4" 99 12,7 42,9-4 69,8 15,8 27, ,9 26,7 52 0,8 25 1" ,3 50,8 63,5 4 79,4 15,8 34, ,0 33,4 56 1, /4" ,7 63,5 73,2 4 88,9 15,8 43, ,3 42,2 57 1, /2" ,5 73,0 82,5 4 98,4 15,8 49, ,5 48,3 62 1,8 50 2" ,1 92,1 101, ,6 19,0 62, ,3 60,3 63 2, /2" ,3 104,8 120, ,7 19,0 74, ,7 73,0 70 4,0 80 3" ,9 127,0 133, ,4 19,0 90, ,2 88,9 70 4, " ,9 157,2 171, ,5 19,0 116, ,9 114,3 76 7, " ,9 185,7 193, ,9 22,2 143, ,0 141,3 89 8, " ,4 215,9 219, ,3 22,2 170, ,5 168, , " ,5 269,9 273, ,4 22,2 221, ,5 219, , " ,2 323,8 330, ,0 25,4 276, ,5 273, , " ,8 381,0 406, ,8 25,4 327, ,0 323, , " ,0 412,8 425, ,2 28,5 359, ,0 355, , " ,6 469,9 482, ,8 28,5 410, ,0 406, , " ,7 533,4 546, ,8 31,8 461, ,0 457, , " ,9 584,2 596, ,0 31,8 513, ,0 508, , " ,7 692,2 711, ,3 35,0 616, ,0 610, ,0 300 lbs ASME B Sizes Drilling Slip On Welding neck DN NPS O C(min) R K Number G d B(min) X Y Weight A Y1 Weight mm mm mm mm mm mm mm mm mm kg mm mm kg 15 1/2" 95 14,2 34,9 50,8 4 66,7 15,8 22, ,2 21,3 52 1,5 20 3/4" ,7 42,9 63,5 4 82,6 19,0 27, ,3 26,7 57 1,8 25 1" ,5 50,8 69,9 4 88,9 19,0 34, ,4 33,4 62 2, /4" ,0 63,5 79,2 4 98,4 19,0 43, ,8 42,2 65 2, /2" ,6 73,0 90, ,3 22,2 49, ,5 48,3 68 3,5 50 2" ,4 92,1 108, ,0 22,2 62, ,0 60,3 70 4, /2" ,4 104,8 127, ,2 22,2 74, ,5 73,0 76 5,0 80 3" ,4 127,0 146, ,3 22,2 90, ,0 88,9 79 7, " ,8 157,2 174, ,0 22,2 116, ,1 114, , " ,0 185,7 209, ,0 22,2 143, ,5 141, , " ,6 215,9 241, ,9 22,2 170, ,5 168, , " ,1 269,9 301, ,2 25,4 221, ,0 219, , " ,8 323,8 355, ,4 28,5 276, ,0 273, , " ,8 381,0 412, ,8 31,8 327, ,0 323, , " ,8 412,8 457, ,4 31,8 359, ,0 355, , " ,2 469,9 508, ,5 35,0 410, ,0 406, , " ,5 533,4 574, ,6 35,0 461, ,0 457, , " ,5 584,2 635, ,8 35,0 513, ,0 508, , " ,9 692,2 749, ,8 41,1 616, ,0 610, ,0
23 Notes Rumenački put Rumenka tel/fax: (021) , , ,
24 Rumenački put Rumenka tel/fax: (021) , , ,
flowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
Forged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
EXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
Yl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
d z z Le Le Elbow d L mm equiv inch 110 Le r 1) z 5 2 5 5 8 2 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
EXPERT PIPE SOLUTIONS FOR INDUSTRIAL APPLICATION SEAMLESS PIPES, WELDED PIPES AND HOLLOW SECTIONS
EXPERT PIPE SOLUTIONS FOR INDUSTRIAL APPLICATION SEAMLESS PIPES, WELDED PIPES AND HOLLOW SECTIONS CONTENT Seamless pipes ASTM A106/A53 ASTM A333 EN 10255 EN 10210 / EN 10297 /DIN 1629 EN 10216-1 / EN 10216-2
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
Long Welding Neck Flanges Catalogue
Hydraulic & Offshore Supplies Long Welding Neck Flanges Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE LONG WELDING NECK FLANGES
JIS G (SGP)
JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3
Standard. 26,9 219,1 20X20 150X150 30x20 200x100 EN /2
PRODUCTION PROGRAM OF ARCELORMITTAL TUBULAR PRODUCTS IASI SA Table - Cold formed HF-welded hollow sections Cold finished structural hollow of non-alloy and fine grain steels Type CFCHS CFSHS CFRHS Range
Twin plate check valves. Carbon steel and stainless steel body Sizes 50 to 300 mm (2 to 12 ) Class 150 and Class 300. Standard design.
Type series booklet.1/ -- SERIE 0 Twin plate check valves Carbon steel and stainless steel body s to mm ( to 1 ) Class 1 and Class Applications Industrial process, chemicals, petrochemicals, sugar industry,
DK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
PTFE Lined Pipe and Fittings
Allied Supreme Corp. - 1 - PTFE Lined Pipe and Fittings Allied Supreme Corp. - 2 - Index Specification For PTFE Lined Pipe and Fittings..3 PTFE Lined Pipe 7 PTFE Lined 90 Elbow. 8 PTFE Lined 45 Elbow.9
BALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 05-07-2016 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
BENTELER Distribution. Pipe solutions to the petrochemical and power generation sectors
BENTELER Distribution Pipe solutions to the petrochemical and power generation sectors About us BENTELER Distribution is an internationally operating stockholding and processing company of steel tubes
Product Data Sheet , Rev KA April 2010 Rosemount 1495 and Contents
Product Data Sheet Rosemount 1495 and 1496 Rosemount 1495 Orifice Plate Rosemount 1496 Orifice Flange Union Comprehensive offering Easy to use, prove, and troubleshoot The Rosemount 1495 Orifice Plate
PIPE LOG BOOK. Project no:... Project:... Construction section:... On behalf of:... Commissioned by:... Order no:... Date:... Construction period:...
FW-FERNWÄRME-TECHNIK GmbH Grafftring 2-6 D-29227 Celle Tel.: + 49 5141 888 88-0 Fax: + 49 5141 888 88-22 E-Mail: info@fw-gmbh.de Internet: www.fw-gmbh.de PIPE LOG BOOK... Project:... Construction section:...
Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
Rate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
Materials : Carbon steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2 to 16 ) Flanges R.F. Class 300 (PN50) - 29 C + 425 C Max Pressure : 50 Bars Specifications : Swing check valve Bolted bonnet Vertical
GRUVLOK FITTINGS FOR GROOVED-END PIPE
GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These
Materials Services Materials Poland. Carbon steel. Materials and services
Materials Materials Poland Carbon steel Materials and services 2 Contents 3 Carbon steel Materials and services About the company 4 5 Sheets and plates 6 9 Tubes 10 21 Seamless tubes 10 19 Welded tubes
Factory address: Mola sadra st., Abooreyhan st Eshtehard Industrial Town, TEHRAN/ IRAN
z d Le mm equiv inch Le r 1) z z Le L 110 5 2 5 5 8 2 Elbow d 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
EXTRACTION CHECK VALVES
EXTRACTION CHECK VALVES COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual production
IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS. ANSI # 150.
IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS.. The information contained in this publication is intended as a guide to customers, and is freely given in good faith. Whilst every care has been
STEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES
STEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES More than 20 years of experience in design and manufacturing and service of custom made actuated Steamextraction Check valves for the Power Generation
Totaiyo Steel Industry トタイヨ 鉄鋼業界. Manufacturers of Pipe Fittings
Y IS R QUALIT AS O D 'S RE G TE L LY S U RA NC E ISO Totaiyo Steel Industry トタイヨ 鉄鋼業界 Manufacturers of Pipe Fittings 900 PROFILE The Company TOTAIYO is the brand name of the flange, fittings manufacturing
Product Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
A Baosteel Holding Company Boly Pipe Co., Ltd.
Boly Pipe Co., Ltd. January, 2018 Who are we? Baosteel Group The Only One Running Hot Rolling Seamless Mill in ASEAN Fully Processing Manufacturer of OCTG and Line Pipe Established in Mar., 2012 Start
BALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 20-02-2015 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
FLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A
FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below).
Ultra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
Type 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
DOMIZI CHAMBER FOR LEVEL INSTRUMENTS Model : DBH-SO and DBH-WN
DOMIZI HAMBR FOR LVL INSTRUMNTS Model : DBH-SO and DBH-WN The DOMIZI hambers allow to link different level instruments (guided wave radar, torsion bars etc..) to the process, providing various benefits
SERVICE QUALITY RELIABILITY FLEXIBILITY
SERVICE QUALITY RELIABILITY FLEXIBILITY About us: AFS Fittings Service Achim GmbH&Co.KG stands for service solutions for pipe works since 1984. In our own production facility we are aiming to fulfill technically
HD series. HD Series 1 technical data 1 components DN RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4
HD series double eccentric HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 tables dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes
A GUIDE TO PIPE SIZES
A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart
Piping Systems Data Charts
Piping Systems Data Charts 00 478 335 www.steelandtube.co.nz Face side Chart Reverse side Chart YOUR TOTAL PIPING PACKAGE Steel & Tube is New Zealand s largest distributor Pipes, Pipe Fittings, Valves
Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101
GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101 Available Sizes 1" through 12" (25 through ) Pipe Material Carbon steel, Schedule 10, Schedule 40. For use with alternative materials and wall thicknesses
Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10
Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10 KME Germany AG & Co. KG OSNA 10 [GB] Member of the KME Group Contents Your Partner KME The Material
BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
B U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
Type 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
GROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
Series 2000 Top Guided Control Valve
Series 2000 Top Guided Control Valve Series 2000 Control Valve Series 2000 process Control Valves. Sturdy design with special service trims available for: Cavitation Control Noise Reduction Top entry construction
Type 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.05-E 462.01-D Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN 63-160, DN 50 150, T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control
FIRE SPRINKLER EQUIPMENT SUBMITTAL
Fire Systems West, Inc. 206 FRONTAGE ROAD NORTH, SUITE C PACIFIC, WA 98047 (253) 833-1248 FIRE SPRINKLER EQUIPMENT SUBMITTAL FOR Being 4-20-21 VPAL MAINTENANCE SHED AND SUBSTATION FSW JOB NO. 02-11-11013
Ref FIRE SAFE BALL VALVE ISO PN50 ANSI Model/Ref:
FIRE SAFE BALL VALVE ISO PN50 ANSI 300 Model/Ref: 768-769 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN50 ANSI300 R.F. Flanges -50 C in
Type 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.04-E Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring plate
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
SEMPELL HIGH PRESSURE CHECK VALVE MODEL VR500 (ASME)
Designed for use in high temperature and high pressure systems wherever a reverse flow has to be avoided. FEATURES Piston type check valve Body made of forged steel Wear resistant stellite body seat Separated
2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 756-757 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN20 ANSI150 R.F. Flanges -50 C in SS and -29 C
Product Catalogue2015 NORDIC QUALITY, PRECISION, DEPENDABILITY AND KNOW-HOW
Product Catalogue2015 NORDIC QUALITY, PRECISION, DEPENDABILITY AND KNOW-HOW 2 Your specialist in welded stainless steel tubular products 3 Welded Stainless Steel Tubular products for every need 4 Content
Technical specification. Application NAF ProCap is a batch digester capping valve for chips filling in a safe and time saving way. NAF Control Valves
NAF ProCap Capping valve DN00-70, ANSI -0 PN6, ANSI Class 0 Fk.(0)GB 0.7 Primary characteristics NAF ProCap, Capping valve for automated filling of wood chips to the batch digester in Pulp industries.
10.1 Introduction Connections Overview
Content 10.1 Introduction...10.1-1 10.2 Connections Overview...10.2-1 10.2.1 Pressure/Temperature Rating of Connection versus Safety Valve...10.2-1 10.2.2 Flanged Connections...10.2-1 10.2.3 Threaded Connections...10.2-2
Full Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
A type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
Copper & Copper Nickel. Pipes Fittings Flanges.
Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
Valves for general purpose & industry
Valves for general purpose & industry Carbon steel & stainless steel ball valves 1 piece body... page 14 2 piece body... page 14 2 piece body - High temperature... page 14 2 piece construction - 3 way...
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
Materials : Carbon steel or stainless steel
Size : Ends : Max Temperature : DN 15 to 600 mm Flanges PN10/16/25/40 + 150 C for flange gaskets, 200 C for flanges Max Pressure : 40 Bars for flanges PN40 Specifications : Welding flanges Flat flanges
UNITED BRAND FITTINGS
FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x
Raised Face. Groove/Ring Number. Face Diameter min in mm
http://www.yaang.com e-mail: sales@yaang.com BS 393 : 1960 British Standard BS 393 : 1960 - Carbon Steel Pipe s (over 4 ches nomal size) for the Petroleum Industry, covers 1 lb to 600 lb weld neck and
High pressure strainer D71.2
High pressure strainer D71.2 PN 63 250, DN 20 50, T max : 600 C High-pressure strainer D71.2 with flanges or butt weld ends,strainer insert made of stainlees steel, with nonasbestos gasket. Meets the requirements
ASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
DIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable
P I P E F I T T I N G S 2002
PIPE FITTINGS 02 INTRODUCTION PIPE FITTINGS 02 OneSteel is Australia s largest distributor of Pipes, Pipe Fittings, Valves and associated accessories. The OneSteel distribution network offers more than
The Amodil Group. Specialists In Stainless Steel Long Products
Specialists In Stainless Steel Long Products Specialists In Stainless Steel Long Products Round Hexagon Flat Square Angle Billet Seamless Pipe & Tube Hollow Bar Fittings Over 5,000 tonnes of Stainless
STAINLESS STEEL SYSTEMS
STAINLESS STEEL SYSTEMS 139 Systems Table of Contents Figure 472 Rigid Couplings Page 142 Figure 401 45 Elbows Page 149 Figure SS-7X Rigid Couplings (Large Diameter) Page 143 Figure 405 Flexible Couplings
IBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Type. Type 457, , 458. Flanged Safety Relief Valves spring loaded
Type Type 458 Packed lever H4 Closed bonnet Conventional design 457, 458 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Materials Conventional design 09/02 Balanced bellows design 09/04
R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
Copper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30)
Shipbuilding OSNA -10 and OSNA -30 Copper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30) KME Germany GmbH & Co. KG Shipbuilding - OSNA -10 and OSNA -30 [EN] Content KME - The Company
Bore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
Supplementary instructions Flanges according to DIN - EN - ASME - JIS - GOST Technical data. Document ID: 31088
Supplementary instructions Flanges according to DIN - EN - ASME - JIS - GOST Technical data Document ID: 10 1 Product description 1 Product description 1.1 Specifications The described flanges are threaded
10.3 Flanged Connections acc. to EN 1092
10.3 Flanged Connections acc. to EN 1092 EN 1092 is split into two sections: - EN 1092-1 edition 09-2008 for steel flanges - EN 1092-2 edition 06-1997 for cast iron flanges EN 1092 contains dimensions
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Class 150 (PN20) R.F. Flanges -50 C in SS and -29 C in carbon steel + 230 C Max Pressure : 20 Bars
MANUFACTURING SPECIFICATION
Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures
Grinnell Grooved Fire Protection Products Grooved Fittings
Technical Services: Tel: (800) 38-932 / Fax: (800) 79-5500 www.tyco-fire.com Grinnell Grooved Fire Protection Products Grooved Fittings General Description LPCB Vd S The grooved fittings provide an economical
Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
PIPE NIPPLES. Welded Pipe Nipples - Black & Galvanized. q Approved q Approved as noted q Not approved. Standard Schedule 40, XH Schedule 80
Welded Nipples - Black & Galvanized Standard Schedule 40, XH Schedule 80 q FIG. 9: Standard Black Schedule 40 q FIG. 8: Extra Heavy Black Schedule 80 q FIG. 4: Standard Galv. Schedule 40 q FIG. 42: Extra
Rosemount 1195 Integral Orifice Primary Element
September 2014 Rosemount DP Flow Rosemount 1195 Integral Orifice Primary Element Rosemount 1195 Integral Orifice Primary Element utilizes a self centering orifice plate design to eliminate installation
GS-FLANGE SYSTEM. SAE psi
SAE 10000 psi Flange dimensions...160 Retain ring flanges...161 Grooving direct on to pipe...162 Flange for welding...163 Tee block, Elbow block...164 Blind flange...165 Seal carriers...166 Retain ring...167
LONG STEM BALL VALVE of carbon steel with welded ends series
with welded ends 38000 series C ont R o L Description Edition 05-07-2016 Ball valve series 38000 tested according to the EN488 standard and fulfill the requirements of this standard. Tight on-off valve
PRESSURE BALANCED TYPE LUBRICATED PLUG VALVES General Index
General Index Range and Index...1 Figure Numbering...2 Materials...3-4 Pressure Testing...5 Installation, Marking and Identification...6-7 Desgin Features...8-9 Stress Analysis to the body...10 Components
16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
Forged Steel Fittings CLASS 3000 THREADED
Forged Steel Fittings CLASS 3000 THREADED NPS 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 DN 6 8 10 15 20 25 32 40 50 65 80 100 90 0 ELBOWS A in 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75
FULL BORE BALL VALVE of carbon steel with welded ends / flanges and series
FULL BORE BALL VALVE with welded ends / flanges 32000 and 32500 series C ont R o L Description Edition Ball valves series 32000 32500 are a tight on-off valves and suitable for liquid pipe systems. Such