CATALOGUE Edition 6 1
|
|
- Shanna Gray
- 5 years ago
- Views:
Transcription
1 CATALOGUE Edition 6 1
2 CONTENTS ODF CATALOGUE EDITION 6 PISTON PUMPS 4 AND 3 BOLT BENT AXIS PISTON PUMPS 40/30 SERIES GEAR PUMPS TANDEM GEAR PUMPS VANE PUMPS ADAPTORS, COUPLINGS, FLANGES TIPPING VALVES CONTROL VALVES SWITCHES PTO S FILTERS AND ACCESSORIES TANKS PAGE /
3 PISTON PUMPS 3 BOLT PISTON PUMPS (6 SPLINE) Min Intermittent Pump Type PPP20CC35M3 20CC PPP34CC35M3 34CC PPP46CC35M3 50CC PPP60CC35M3 60CC 4 BOLT PISTON PUMPS ( 8SPLINE) Min Intermittent Pump Type PPP16CC25M 16CC PPP20CC35M 20CC PPP32CC35M 32CC PPP50CC25M CC PPP50CC35M 50CC PPP60CC35M 60CC PPP80CC28M CC PPP106CC28M CC A C INLET 2 26, ,03 80f7-0,06 D B8x32x35 14 DIN ISO , ,50 36,80 15 B OUTLET 80 3
4 BENT AXIS PISTON PUMPS BENT AXIS PISTON PUMPS No Pump Type Displacement 100 Rpm Min Intermittent Max Peak Pressure (Bar) 2PBA 12 12CC PBA18 18CC PBA25 25CC PBA40 40CC PBA55 56CC PBA63 63CC PBA80 80CC PBA CC PBA CC INLET INLET AS DELIVERED. 6 DIRECTION OF ROTAT ION CHANGED. 1 OUTLET OUTLET HOW TO CHANGE THE DIRECTION OF ROTAT ION OF THE PUMP - Remove the plug (6). To check in which direction the pump should rotate on your installation: - Put the rotation setting screw (1) where the plug (6) was, and the plug (6) - Check the direction of rotation of the PTO; where the rotation setting screw (1) was. - If the PTOturns clockwise, the pump must rotate counter-clockwise, - Put seal (5) on the inlet fitting, then the inlet fitting on the side where the and vice versa. plug (6) is, and fix with the split flange. Tighten with the screws (4). To change the direction of rotation of your 2PBA pump: - Remove the inlet fitting (2) and the 2 parts of the split flange (3). - Remove the rotation setting screw (1). Important note: Do not rotate pump shaft at all until the rotation setting screw (1) is in place. The rotation setting screw is always on the output (pressure) side. 4
5 20/30/40 SERIES GEAR PUMPS 20/30/40 SERIES GEAR PUMPS DPAD30 17 DPAD30 27 DPAD30 34 DPAD30 43 DPAD30 51 DPAD30 61 DPAD30 82 DPAD40-87 DPAD DPAD DPAD Pump Type Displacement cm3/rpm BOLT 20/30/40 SERIES GEAR PUMPS Pump Type Displacement cm3/rpm 3 BOLT DP20 06BD DP20 10BD DP DP DP30 34 DP30 43 DP30 51 DP30 61 DP Bolt 26,10 4 Bolt 12 4 BOLT 3 2 6x21x25 21 UNI 222-0,03 52 f7-0,06 15,50 16 DIN ISO 14 8x32x35 M8 8,10 8,50 36,
6 TANDEM GEAR PUMPS PRIMARY PUMPS Pump Type Displacement cm3/rpm DPAD DPAD DPAD DPAD FINAL PUMPS Pump Type Displacement cm3/rpm DP DP DP DP DP DP DP ,10 12 C INLET 13-0,03 80f7-0,06 8,10 21 UNI 222 6x21x25 8, ,80 A 55 B 6 AVAILABLE IN 3 BOLT ON REQUEST
7 VANE PUMPS DOUBLE & SINGLE VANE PUMPS Description CC Per Rev Min/ Speed (RPM) VP R/L Double Vane VP R/L Double Vane VP 26 R/L Single Vane VP 34 R/L Single Vane VP 55 R/L Single Vane VP 63 R/L Single Vane VP 80 R/L Single Vane ODF VANE PUMPS The design of the ODF vane pumps makes them particularly suitable for applications on trucks, especially vehicles operating with hydraulic motors, like feed bulkers, fuel tankers etc. All the components subject to wear, are contained in a cartridge unit that can easily be removed for inspection and/or replacement without disconnecting the pump from the circuit. This drastically reduces expensive downtime. The vanes ensure a more lamina flow instead of the more turbulent (pulsating) flow from a piston pump, which is perfect for hydraulic motors, resulting in extending the life and increasing efficiency. The special design of the double-lip vanes renders the ODF vane pumps ideally suitable for applications that require high pressure levels and very low noise emissions. Furthermore, the two opposed pumping chambers formed by the elliptical profile of the cam, cancel out radial loads which dramatically reduces vibrations and increases the pump s lifespan considerably. In addition to reliability, the ODF pump guarantees continuous high volumetric efficiency during its whole service time. This diminishes the requirement to compensate for the typical efficiency loss of other kinds of pumps, that increases the truck engine RPM, which in turn causes increased fuel consumption, air pollution, fuel cost and engine wear etc. Such characteristics, along with an extremely low noise-level, make ODF pumps environmentally friendly in line with the latest ecological trend. The pumps are extremely compact and are supplied with different types of either ISO or UNI norm mountings, for direct coupling with PTO and SAE norm hydraulic fittings. This, together with the ability to orientate the inlet and outlet ports, make ODF pumps very easy to install and guarantees their interchangeability with other types of pumps. OTHER SIZES (CC) AVAILABLE ON REQUEST. AVAILABLE IN EITHER CLOCKWISE OR ANTI CLOCKWISE STANDARD ISO 4 BOLT MOUNT 8 SPLINE SHAFT 7
8 ADAPTORS ISO ADAPTOR 4x3 : ADP3H4 UNI ADAPTOR 3x4 : ADP4H3 EXT ADAPTOR : UNADP ,5 18, Ø80 Ø35 Ø SPIGGET SPLINE Ø35 FLANGES 6 Spline: PSAF 8 Spline: PSAF1120 8
9 TIPPING VALVES SINGLE ACTING TIPPING VALVE - SLOW DESCENT G3/4" PUMP Flow Rate (L/Min) SLOW FAST G 1/4" G 1/4" SATV 12POLM TANK 119,50 G3/4 33,50 G3/4" 196 CYLINDER 89,50 SINGLE ACTING TIPPING VALVES - DOP19 HIGH PRESSURE Flow Rate (L/Min) DOP DOP19H
10 TIPPING VALVES SINGLE ACTING TIPPING VALVE - WITH HOLDING POSITION Flow Rate (L/Min) TP SINGLE ACTING TIPPING VALVE - MANUAL ( MEILLER TYPE) Flow Rate (L/Min) HYDV.MK , , OIL OUTLET M22x1.5 OIL INLET M22x1.5 10
11 CONTROL VALVES SINGLE SIDE TIPPER VALVE Flow Rate (L/Min) SINGLE SIDE TIPPER VALVE T1 P C T2 T3 B A PP1 PP2 T1 P C T2 T3 P1 P2 TWIN SIDE TIPPER VALVE Flow Rate (L/Min) TWIN SIDE TIPPER VALVE T1 P C T2 T3 B A PP1 PP2 B A T1 P C T2 T3 T1 P C T2 T3 PP1 PP2 P1 P2 11
12 SWITCHES PNEUMATIC AIR SWITCHES Type Pressure (BAR) Port Size Operations CAC1 CAC1 10 1/8 BSP SINGLE (WITH LIGHT) CAC2 10 1/8 BSP DOUBLE PNEUMATIC CAB CONTROL SWITCH Pneumatic Inlet Pneumatic Outlet Pressure (BAR) Min. Pressure (BAR) Environment CSPVA G 1/8 M PNEUMATIC P.T.O FAIL SAFE SWITCH Pneumatic Inlet Pneumatic Outlet Pressure (BAR) PTOFSW G 1/8 G 1/8 12 INSIDE CAB CONTROL VALVE Pneumatic Inlet Pneumatic Outlet Pressure (BAR) 5/3WPV (spring return) G 1/8 G 1/8 12 5/3WPVD (detent) G 1/8 G 1/
13 POWER TAKE OFFS VARIOUS PTO S AVAILABLE FULLER BOTTOM MOUNT EATON PTO EATON FULLER PTO UNI 3 BOLT EATON PTO FS DOUBLE GEAR ISO ISUZU PTO ISUZU MLD6A ISUZU MBJ6T UNI PTO ISUZU MYY5T UNI PTO MITSUBISHI PTO M3S5 MERCEDES PTO G131/ MERCEDES G3 210/240/240//221 PTO (SINGLE GEAR) MERCEDES ACTROS 270MM INTR MERCEDES G4 PTO MERCEDES PTO G125 NISSAN /210/240//255/ VOLVO SR62 COVER PTO ZF OFF-SET PTO ZF OFF-SET PTO DBL GEAR (HEM) HEAVY DUTY MERCEDES G85 OFFSET MERCEDES G85 SQUARE VOLVO SR1700 COVER CARDAN SHAFT PTO CABLE ZF S535 S636 DOUBLE GEAR 1/1.30 EATON SIDEMOUNT PTO FULLER BOTTOM MOUNT 4 BOLT PTO HEAVY DUTY SCANIA PTO SCANIA PTO GRS900 3 BOLT (GRS900R) FULLER PTO ISO 4 BOLT EATON OFFSET 4 bolt ISUZU MYY5T UNI - PTO MACHANICL CONTROL MITSUBISHI PTO MERCEDES PTO MERCEDES G100 PTO NISSAN MLS62B ZF PTO PTO MECHANIC SQUARE PTO ZF CABLE CONTROL ZF S535 S636 SINGLE GEAR ALUM PTO ZF OFF-SET P.T.O CLOSED VOLVO PTO 13
14 FILTERS & ACCESSORIES TANK MOUNTED FILTERS TTF-34 TTF-100 TTF-114 Size 3/4 BSP 1 BSP 1 1/4 BSP SPIN ON FILTERS SOF-34 SOF-114 Size 3/4 BSP 1 1/4 BSP AIR & FILLER BREATHERS OIL LEVEL INDICATORS Size Size AB-12 AB-34 FB-2 1/2 BSP 3/4 BSP 52 mm LIT-1 LIT-2 LIT-3 76 mm 127 mm 254 mm 14
15 TANKS SIDE MOUNTED TANKS Tank Volume 80 LT 100 LT 120 LT 160 LT 190 LT 210 LT 256 LT Volume 65 LT 80 LT 100 LT 140 LT 160 LT 180 LT 230LT * DIMENSIONS ON REQUEST BEHIND CAB TANKS Tank Volume 65 LT 95 LT 105 LT 120 LT 155 LT 175 LT 200 LT 220 LT 225 LT 264 LT 285 LT Volume 55 LT 75 LT 90 LT 100 LT 135 LT 150 LT 180 LT 190 LT 190 LT 230 LT 250 LT ALL TANKS ARE SUPPLIED WITH AIR BREATHER, TANK MOUNTED RETURN FILTER AND OIL LEVEL INDICATOR * DIMENSIONS ON REQUEST 15
16 ODF Distributors Africa Limpopo Polokwane Tzaneen North West Mafikeng Klerksdorp Gauteng Middelburg Nelspruit JHB Mpumalanga Upington Kuruman Free State Welkom KwaZulu-Natal Pietermaritzburg Zambia Mozambique Northern Cape Kimberley Bloemfontein Westmead Namibia Botswana Zimbabwe Eastern Cape Western Cape Cape Town P.E www. odfpumps.com Although every effort has been made to ensure all information is correct at time of going to print. We cannot accept responsibility for incorrect information supplied or errors which may occur during reproduction. 16
Brochure Hydraulic Pumps, Hydraulic Parts
www.hidrocel.com.tr 2013 Brochure Hydraulic s, Hydraulic Parts Product Group Bent Axis s Piston s PBA s 2PBA s PBX s Gear s PA s PH s Power Take Off HDP s PTO Adapter, Valve, Cardan Shaft www.hidrocel.com.tr
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationTruck Hydraulics. Series F1, F2, T1 Fixed Displacement Pumps
Series F1, F2, T1 Fixed Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Hydraulic Pumps,
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi 1 l...0,264 US
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationTruck Hydraulics. F1 F2 T1 VP1 PTO info Accessories. Fixed and Variable Displacement Pumps, Motors and Accessories. Catalogue HY /UK April 2003
Fixed and Variable Displacement Pumps, Motors and Accessories Catalogue HY17-8200/UK April 2003 F1 F2 T1 VP1 PTO info Accessories Conversion factors 1 kg 2.20 lb 1 N 0.225 lbf 1 Nm 0.738 lbf ft 1 bar 14.5
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationHYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG. Hybel - Hydraulic Oil Pumps and Motors
HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG Hybel Hydraulic Oil Pumps and Motors HYDRAULIC OIL PUMPS AND MOTORS Contents CONTENTS About us.... 04 Products Line.... 06 Configure your product.... 08 Aluminibeta
More informationPump SCP / SCPT 090,130 DIN, SAE
3118 GB Pump SCP 012-108 / SCPT 090,130 DIN, SAE Sunfab SCP and SCPT are range of piston pumps of a bent axis design with fixed displacement for demanding mobile hydraulics. It covers the whole displacement
More informationTruck Accessories. Fittings, Adaptor kits and accessories for F1, F2, T1 and VP1 pumps
2 3 1 R L ROTTION NORML RUNNING CHNGE FILTER Truck ccessories Fittings, daptor kits and accessories for F1, F2, T1 and VP1 pumps aerospace climate control electromechanical filtration fluid & gas handling
More informationXAi series. the intelligent pump - SAE version. fixed displacement bent axis design. XAi SAE version - Presentation ADVANTAGES
XAi SAE version - Presentation XAi series the intelligent pump - SAE version fixed displacement bent axis design The compact size envelope of XAi pumps, together their technology, means they can be installed
More informationTruck Hydraulics. Serie VP1 Variable Displacement Pumps
ruck Hydraulics Variable Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Pump and line
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi 1 l...0,264 US
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationHydraulic Pump Series VP1 Variable Displacement
Variable Displacement Catalog 9129 8222-02 February 1999, GB Content Page General information 3 Design 3 Specifications 4 Ordering information 4 VP1 cross section 4 Installation dimensions 5 Line dimensioning
More informationContents Page Chapter. - Volvo PTO s Scania PTO s Universal for Scania ED 90 engines for Scania ED 120 engines...
Adapter kits and accessories for F1, F2, T1 and VP1 pumps Contents Page Chapter PTO Air valve kits: - Volvo PTO s...48 - Scania PTO s...48 - Universal... 48 PTO adapter kits: - for Scania ED 90 engines...49
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BV
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BV BV FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES
BV FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationUpdate about new Bent-Axis piston pumps
Update about new Bent-Axis piston pumps Dear Customer, referring to our previous communication about the new bent axis piston pumps, with the aim to help you in the switch from the old series to the new
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Contents Contents Page PGP/PGM500 Characteristics... 3 PGP502 Ordering... 4 PGP502 Performance curves... 5
More informationPOWER TAKE OFF S 1000/2000 SERIES 1200 SERIES 1000 SERIES 3100/3150/3250 SERIES 3250 SERIES 2000 SERIES 3000 SERIES 3100 SERIES
talogo_usa_maquetación 1 31/01/2014 14:14 Página 1 atalogo_usa_maquetación 1 31/01/2014 14:14 Página 2 POWER TAKE OFF S 1000/2000 SERIES 1200 SERIES Our 1000 and 2000 series PTO s have been engineered
More informationPRICES VALID FROM 1 August to 30 September 2014
Our Original Quality Brake Components Continuously Improves Customer Confidence Since 1992 GW Grahamstown Now Open! Quality Replacement Parts Suitable for all German Vehicles, Chevrolet and Toyota Models
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5 psi 1 l...0.264
More informationFixed Displacement Bent Axis Axial Piston Motors TMB 700
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
More informationTPVT 1200 BTB. Variable Displacement Axial Piston Pumps CONTENTS. General Information. Installation Instructions. Technical Specifications 6-7
CONTENTS General Information Installation Instructions Technical Specifications Tandem Pump Installation Drawings Hydraulic Diagrams Rear Pump Mounting Flanges Mounting Shaft and Shaft Details Control
More information2PBA Pumps have the following advantages ;
2PBA Bent Axis Piston Pump 2PBA Pumps have the following advantages ; Compact Design, Economical Conception, High Power Density, High Overall Efficiency, High Rotating Speeds, High Output Pressure, 35
More informationXAi series. the intelligent pump - SAE version. fixed displacement bent axis design. XAi SAE version - Presentation ADVANTAGES
XAi SAE version - Presentation XAi series the intelligent pump - SAE version fixed displacement bent axis design The compact size envelope of XAi pumps, together with their technology, means they can be
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
More informationxxx displacement pumps TXV for trucks
Variable xxx xxx displacement pumps TXV for trucks 1 sommaire why use a variable displacement pump?... 3 your hydraulic equipment.................. 4 load-sensing.... 5 variable displacement... 6 TXV 40
More informationHydraulic Motor/Pump Series F11/F12
Hydraulic Motor/Pump Fixed Displacement Catalogue HY30-8249/UK October 2006 Basic formulas for hydraulic motors Flow (q) D x n q = 1000 x η [l/min] v Torque (M) M = D x p x η hm 63 Power (P) q x p x η
More informationAP212HP Cast Iron Gear Pumps
Cast Iron Gear Pumps Standard and Low Noise series Reference: 200-P-991236-EN-01 Issue: 09.2016 1/56 Contents Page 1 General information... 5 1.1 External gear pumps components... 6 1.2 Technical data...
More informationXPi series. the intelligent pump. fixed displacement bent axis design. XPi - Presentation ADVANTAGES
XPi - Presentation the intelligent pump fixed displacement bent axis design The compact size envelope of XPi pumps, together with their technology, means they can be installed in environments with little
More informationOrdering Code of 2PBA Pumps
Ordering Code of 2PBA Pumps Pump Code 3 Displacement ( cm ) Direction of Version Sealing Inlet Fittings 2PBA 18 L S N A A Suction Fittings Included N Nitrile V Viton S Special Version C Classic Version
More informationExternal Gear Pumps Series F
External Gear Pumps Series F RA 10089/08.11 Replaces: RA 10097 1/60 AZPF-... Fixed pumps Size 4.0...28 cm 3 /rev (.25-1.71 in 3 /rev) Overview of contents Contents Page General 2 Product overview 3 single
More informationRadial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 02.2017 Replaces: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm
More informationHydraulic Motor/Pump Series F11/F12 zp12
Hydraulic Motor/Pump zp12 Fixed Displacement zp11 Catalogue HY17-8249/US March 2004 Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5 psi 1 l...0.264 US gallon 1 cm
More informationHydraulic piston PA PAC PAD. Series
Hydraulic piston pumps PA PAC PAD Series Contents Design of.... 1 Range and characteristics... 2 Characteristics and dimensions... 3 Performance.... 4-5 Accessories.... 6 Shaft sealing... 7 New models
More informationRV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
14 201/118 ED RV1P VARIABLE DISPLACEMENT VANE PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS (measured with mineral oil with viscosity of 46 cst at 40 C) RV1P are variable displacement vane pumps with
More informationRadial piston motors for industrial applications MCR-D
Radial piston motors for industrial applications MCR-D MCR-E RE 15196 Edition: 02.2017 Replaces: 12.2013 MCR-D Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450
More informationLow Speed High Torque Motors
Low Speed High Torque Motors Catalogue HY29-0503/UK TABLE OF CONTENTS Table of contents Features General information Functional description Technical data 3 4 4 5 6 FRAME SIZE P Operating diagrams Overall
More informationPLASTICA ALFA. Compression. Fittings. Pipe Saddles. For use. with. Polyethylene. Pipe. DPI Trading PRODUCT CATALOGUE PROUDLY IMPORTED BY
Compression PRODUCT CATALOGUE Fittings & Pipe Saddles For use with Polyethylene Pipe DPI Trading PROUDLY IMPORTED BY www.dpitrading.co.za www.incledon.co.za Technical Information Body: black polypropylene
More informationRadial piston motor for integrated drives MCR-H
Radial piston motor for integrated drives MCR-H RE 15199 Edition: 03.2017 Replaces: 12.2013 Frame size MCR3, MCR5, MCR10, MCR15, MCR20 Displacement 160 cc to 3000 cc Differential pressure up to 450 bar
More informationVickers 45. VMQ Series 30 Vane Pumps. Fixed Displacement, For Industrial and Mobile Applications (4.188)
[ (4.188) 49,4 (1.94) /21,8 /.86) 174,7/172,3 (6.88/6.78) 332,9/33,5 (13.11/13.1) "M" is marked if metric port threads No marking if inch port threads AS-568-152 O-ring Vickers 45 65,3 (2.57) 13 (5.1 VMQ
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4)
Gerolor Motors S Series Size CC-A Flange Options-B Shaft Options-C Ports Features S S S S S S S S2 2 S31 31 S0 0 SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4) 1.0" Keyed (R) mm Keyed (A) 1.0'
More informationTruck Hydraulics. Series GPA, GP1, F1, T1, F2, F3, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories. parker.
Series GPA, GP1, F1, T1, F2, F3, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories parker.com/pmde Pumps and Motors Change History for edition 01.2017 Pages 9, 42-46: New F3 pump incorporated.
More informationGear Pumps. Series PGP Fixed Displacement Pumps, Cast-Iron Designs
Gear Pumps Series PGP Fixed Displacement Pumps, Cast-Iron Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Table
More informationMobile Hydraulic Pumps T6EM, T6EP. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6EM, T6EP Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing
More informationExtremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
More informationRadial piston motor for track drives MCR-T
Radial piston motor for track drives MCR-T RE 15221 Edition: 03.2017 Replaces 07.2015 Frame size MCR5, MCR6, MCR10 Displacement 620cc to 1340cc Differential pressure up to 400 bar Torque output up to 8530
More informationRADIAL PISTON MOTORS TECHNICAL DATA HRS2. Max. cont. speed. Specific torque. Recommended flushing flow. Displacement. Min. speed.
A/200/ MAX. 195 3,1 750 3 250 275 350 36 45 89,5 84,5 8 26 A/200/69 MIN. 69 1,1 850 5 250 275 350 24 30 85,5 78 8 26 A/200/75 MIN. 75 1,2 800 5 250 275 350 26 32,5 87 81 8 26 A/200/95 MIN. 95 1,5 775 4
More informationAP212 Gear Pumps. Standard and Low Noise series. Reference: 200-P EN-03 1/60. Issue:
Gear Pumps Standard and Low Noise series Reference: 2-P-99123-EN-3 Issue: 9.215 1/6 Contents Page 1 General information... 4 1.1 External gear pumps components... 5 1.2 Example of typical sound pressure
More informationTMF 600 ( cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More information2PS Pumps have the following advantages ;
2PS Bent Axis Piston Pump - ISO 2PS Pumps have the following advantages ; Compact esign, Economical Conception, High Power ensity, High Overall Efficiency, High Rotating Speeds, High Output Pressure, From
More informationHYVA PTO S PNEUMATICALLY OPERATED POWER TAKE-OFF. Hyva Partno. PTO only: Page 1 / 1. Specifications. Mounting kit
Hyva Partno. PTO only: 021211072 Type Gearbox: SCANIA Type Gearbox GR-GRH 900 PTO ratio@1000 eng. rpm 1182 prm Max torque 480 Nm Mounting side Right Cw Part no. 021461002 228-02417HY DO-E 021211072 / 10
More informationPLASTICA ALFA. Compression. Fittings. Pipe Saddles. For use. with. Polyethylene. Pipe PRODUCT CATALOGUE PROUDLY IMPORTED BY.
Compression PRODUCT CATALOGUE Fittings & Pipe Saddles For use with Polyethylene Pipe DPI Trading PROUDLY IMPORTED BY www.dpitrading.co.za www.incledon.co.za Technical Information Body: black polypropylene
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
More informationVPPM /110 ED VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
16 100/110 ED VPPM VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS OPERATING PRINCIPLE The VPPM pumps are variable displacement axial-piston pumps with variable swash plate, suitable for applications with open
More informationhyva.com HYDRAULIC TIPPING SOLUTIONS
hyva.com HYDRAULIC TIPPING SOLUTIONS HYVA WETKITS HYVA WETKITS We offer a wide variety of hydraulic systems which can cope with the most demanding work conditions and applications. Every Hyva customer
More informationPumps. Pumps GoTo Europe
Pumps GoTo Europe 7 Pumps Axial piston pumps Axial piston pumps in swash plate and bent axis design are intended for the medium and high pressure range. Variations in the designs, in the performance ranges
More informationMobile Hydraulic Pumps T6DCCM. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6DCCM Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing
More informationXPi series. the intelligent pump. fixed displacement bent axis design. XPi - Presentation ADVANTAGES
XPi - Presentation the intelligent pump fixed displacement bent axis design The compact size envelope of XPi pumps, together with their technology, means they can be installed in environments with little
More information2009 / 10 PTO TRUCK PUMPS
09 / 10 PTO TRUCK PUMPS GEAR PUMP MANUFACTURING (PTY) LTD PTO GEAR PUMP RANGE TANDEM PUMP Pump Specifications Manufactured in South Africa SINGLE PUMP GP3 SINGLE PUMP 024 032 040 048 102 118 132 147 GP3T
More informationRadial piston motor for wheel drives MCR-F
Radial piston motor for wheel drives MCR-F RE 15198 Edition: 02.2017 Replaces 07.2015 Frame size MCR3, MCR5, MCR10, MCR15 (for frame size 20 see MCR20-C) Displacement 160 cc to 2150 cc Differential pressure
More informationGear Motors. Series PGM Fixed Displacement Motors, Aluminium Designs
Gear Motors Series PGM Fixed Displacement Motors, Aluminium Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
More informationPVD /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE
14 100/117 ED PVD VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with mechanical pressure compensator. The pressure
More informationHydraulic Pump Series F1plus Fixed Displacement
Fixed Displacement Catalog 9129 8218-02 February 1999, GB Content General information, design 3 Specifications 4 Pump cross section 4 Pump and line selection 5 Ordering code 6 Standard versions 6 Installation
More informationP2060 P2075 P2105 P2145 P3105 P3145
Technical Information Technical Features P2 Series Compact design Low noise level Service friendly Reliable Long-lasting Flexible Easy to install High self-priming speed Technical Data P3 Series P2 Series
More informationIGP /117 ED INTERNAL GEAR PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
00/7 ED IGP INTERNAL GEAR PUMPS OPERATING PRINCIPLE IGP pumps are volumetric displacement pumps with internal gears, available in five sizes, each divided into a range of different displacement. The pumps
More informationC9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic
More informationHydraulic Pump Series F1 Fixed Displacement
Fixed Displacement Catalog 9129 8201-02 August, 1997 GB Content General information 3 Specifications 4 Pump and line selection 5 Ordering code 5 Standard versions 5 Installation dimensions 6 Installation
More informationTXV - Characteristics
TXV - Characteristics TXV pumps are available in 11 models from to 150 cc/rev maximum displacement. Pump reference Direction of rotation Maximum displac. (1) Max. operating pressure Max. peak pressure
More informationRadial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm Speed up to 125
More informationRadial piston motor for heavy duty wheel drives MCR-W
Radial piston motor for heavy duty wheel drives MCR-W RE 15200 Edition: 09.2015 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530
More informationMobile Hydraulic Pumps T6G, T67G, T6ZC. Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6G, T67G, T6ZC Denison Vane Technology, fixed displacement aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing
More information6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
More informationIndustrial Hydraulic Pumps T7DBB, T7DBBS. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Industrial T7DBB, T7DBBS Denison Vane Technology, fixed displacement Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing our parts to keep you
More informationVariable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
More informationPA Pumps have the following advantages ;
PA Axial Piston Pump PA Pumps have the following advantages ; Simple to use, Economical Conception, High Rotating Speeds, High Output Pressure, 350 bar Cont. Work. Pressure, 400 bar Peak Pressure, From
More informationBent Axis Piston Motor, Fixed, Bi-directional Series: MFBP...1
Features 40 bent axis piston motor for high power and small overall dimensions Bi-directional rotation Rotation speed up to 8800 rpm Torque up to 840 Nm ( 619 ft-lbs) Side or rear port locations available
More informationHDP Series. Hydraulic Gear Pumps. high performance, custom design, low noise emission, high efficiency...
HDP Series Hydraulic Gear s high performance, custom design, low noise emission, high efficiency... www.hidrocel.com.tr 1 Contents Design of HDP s Range and characteristics HDP 3/61 ISO HDP 3/61 UNI HDP
More informationCatalog PowrFlowTM PVX Vane Pumps
Catalog PowrFlowTM PVX Vane Pumps Your source for vane pumps for the most demanding applications. What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane Pumps deliver
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC HW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationCONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...
CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29
More informationMOTORS M HYDRAULIC MOTORS
MOTORS M HYDRAULIC MOTORS T E C H N I C A L C A T A L O G Fixed displaced axial piston motors POCLAIN HYDRAULICS Displacement cm³/rev [in³/rev.] M0 M1 M2 M3 From 7,07 [0.43] to 17,84 [1.09] From 9,08 [0.55]
More informationVickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
More informationRadial piston motor for frame integrated drives MCR-A
Radial piston motor for frame integrated drives MCR-A RE 15195 Edition: 12.2013 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530
More informationRadial piston hydraulic motor Hägglunds CAb
Radial piston hydraulic motor Hägglunds CAb RE 15354 Edition: 12.2016 Replace: 01.2015 Frame Size: CAb 10, 20, 30, 40 Displacement: 503 2 513 cm 3 /rev [31-153 in 3 /rev] Specific torque: 8 40 Nm/bar [407
More informationTPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MH APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationHydraulic Equipment. PTOs pg Pumps & Motors pg Valves pg Building our world
Building our world Hydraulic Equipment PTOs pg. 4-5 Pumps & Motors pg. 6-9 Valves pg. 10-11 +34 91 818 82 97 bezares@bezares.com bezares.com Avenida de las Retamas, 145 45950 Toledo España About Bezares
More informationVariable displacement axial piston pumps
Variable displacement axial piston pumps SVP series GENERAL INFORMATIONS Variable displacement axial piston pump swash plate design for open circuit-flow sharing control valve. The pump has been designed
More informationVariable Displacement Piston Pumps Series P2/P3. General Information. P3 Series
General Information General Information P2 Series The newly developed variable displacement piston pumps from Parker Hannifin, designated P2, are intended for mobile applications, featuring a very compact
More information