TURNING DISK STEEL CHAINS:
|
|
|
- Gwen Owens
- 5 years ago
- Views:
Transcription
1 TURNING DISK STEEL CHAINS: Series 878TAB MULTIFLEX CHAINS
2 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø Ø18 Z B C M R Ø72 M = diam. B = inside diam MACHINED C = outside diam. TURNING DISK Plain bore Ø 18.. Radius = R Diam. = B Ø6 1. Z B R Ø18 The use of tangential sprockets and turning disks enables the design of compact conveying systems with a great number of curves. It becomes easy to realise circuits either on the same level or staggered, inclined or downclined. Radius = R. Turning disk Tangential sprocket Radius = R. 324 SYSTEM PLAST - CONVEYOR CHAINS-BELTS - Issue 6.
3 DRIVE AND IDLER DISK for sideflexing chains 878 TAB TANGENTIAL SPROCKETS.. 1 Ø6 R 34 Z B C M R 12781L L Ø69 M = diam. B = inside diam. Ø C = outside diam. MOLDED MACHINED HUB FOR TANGENTIAL SPROCKETS Material: aluminium. Packaging: 1 hub for tangential sprockets 4 screws M6 in stainless steel. 4 nuts in stainless steel. A Ø DF 12772G 18* *Plain Bore A Ø DF Ø9 Ø6. Ø 6 12 M8 6 Ø 11 SYSTEM PLAST - CONVEYOR CHAINS-BELTS - Issue 6. 32
4 878 TAB TURNING DISK for sideflexing chains TURNING DISK CLOSED CARRY and RETURN Radius = R Diam. = B Ø Z equiv. TURNING DISK OPEN CARRY and RETURN B C MACHINED Radius = R Diam. = B Ø6 Ø3.2 Z equiv. B C COMPONENTSSHAFT DIMENSIONS Ø23.9 OPEN CLOSED 1 - Turning disk. 2 - Single race radial ball bearing with two sliding seals, type 6-2RS (2x47x12). 3 - External (retaining) ring, Ø 2 DIN Seal ring with dust cover, 2x47x7 DIN 376 (NBR rubber). - Internal (retaining) ring, Ø 47 DIN Bearing spacer. 7 - Seal ring with dust cover, 2x42x7 DIN 376 (NBR rubber). H h7 OPEN H = h H h CLOSED OPEN Ø23.9 R1 h h All components are supplied separately, except the shaft bearings which are pre-assembled. 326 SYSTEM PLAST - CONVEYOR CHAINS-BELTS - Issue 6.
5 TURNING DISK for sideflexing chains 878 TAB TURNING DISK CLOSED CARRY and RETURN 1. Radius = R Diam. = B Ø Z equiv. TURNING DISK OPEN CARRY and RETURN B R MOLDED 1. Radius = R Diam. = B Ø Ø3 16 Z equiv. B R COMPONENTSSHAFT DIMENSIONS Ø23.9 OPEN CLOSED 1 - Turning disk. 2 - Single race radial ball bearing with two sliding seals, type 6-2RS (2x47x12). 3 - External (retaining) ring, Ø 2 DIN Seal ring with dust cover, 2x47x7 DIN 376 (NBR rubber). - Internal (retaining) ring, Ø 47 DIN Bearing spacer. 7 - Seal ring with dust cover, 2x3x7 DIN 376 (NBR rubber). H h7 OPEN H = H H h CLOSED OPEN Ø23.9 R1 h h All components are supplied separately, except the shaft bearings which are pre-assembled. SYSTEM PLAST - CONVEYOR CHAINS-BELTS - Issue
6 17 - HMGK FN TURNING DISK for multiflex chains MACHINED TURNING DISK - Closed version TURNING DISK - Closed version 128 CARRY RETURN 1286 Ø247 Ø6 Ø247 Ø6 2 2 R1 R1 TURNING DISK - Open version TURNING DISK - Open version 1287 CARRY RETURN 1288 Ø247 Ø6 Ø42 Ø247 Ø6 Ø R1 R1 All components are supplied separately, except the shaft bearings which are pre-assembled. 328 SYSTEM PLAST - CONVEYOR CHAINS-BELTS - Issue 6.
7 TURNING DISK HMGK FN for multiflex chains Ø 247 Ø Ø23 MOLDED h1 H 32.2 H = h Ø 2 h7 1 Ø 247 Ø TURNING DISK - Closed version reinforced with glass fiber.. CARRY AND RETURN Ø Ø 247 Ø TURNING DISK - Open version reinforced with glass fiber.. CARRY AND RETURN Ø All components are supplied separately, except the shaft bearings which are pre-assembled. SYSTEM PLAST - CONVEYOR CHAINS-BELTS - Issue
8 171 TAB TAB OP TURNING DISK 7 TAB - 71 TAB - 7 TAB for multiflex chains MACHINED TURNING DISK - Closed version TURNING DISK - Closed version 1289 CARRY RETURN 1281 Ø247 Ø6 Ø247 Ø R1 R1 TURNING DISK - Open version TURNING DISK - Open version CARRY RETURN Ø247 Ø6 Ø42 17 Ø247 Ø6 Ø42 17 R1 R1 All components are supplied separately, except the shaft bearings which are pre-assembled. 33 SYSTEM PLAST - CONVEYOR CHAINS-BELTS - Issue 6.
9 TURNING DISK for multiflex chains 171 TAB TAB OP 7 TAB - 71 TAB - 7 TAB Ø 247 Ø H h MOLDED H = h Ø 2 h7 1 Ø 247 Ø TURNING DISK - Closed version reinforced with glass fiber.. CARRY AND RETURN Ø Ø 247 Ø TURNING DISK - Open version reinforced with glass fiber.. CARRY AND RETURN Ø All components are supplied separately, except the shaft bearings which are pre-assembled. SYSTEM PLAST - CONVEYOR CHAINS-BELTS - Issue
10 332 SYSTEM PLAST - CONVEYOR CHAINS-BELTS - Issue 6.
11 System Plast TECHNICAL INFORMATION
12 TECHNICAL INFORMATION tolerances and dimensions SPLIT SPROCKETS DF b t nominal tolerance nominal tolerance nominal tolerance 2 P9 ( ) 6 P9 ( ) P9 ( ) 8 P9 ( ) P9 ( ) 8 P9 ( ) P9 ( ) 1 P9 ( ) P9 ( ) 12 P9 ( ) P9 ( ) 14 P9 ( ) 48.8 P9 ( -.26 ) 14 P9 ( -.18 ) UNI /ISO DIN Tolerance for plus sprockets (+.) (+.3) (+.3) (+.2) DF b t (+.4) (+.2) STANDARD SPROCKETS DF b t nominal tolerance nominal tolerance nominal tolerance 2 H7 ( +.21 ) 6 D1 ( ) H7 ( +.21 ) 8 D1 ( ) H7 ( +.21 ) 8 D1 ( ) H7 ( +.2 ) 1 D1 ( ) H7 ( +.2 ) 12 D1 ( ) H7 ( +.2 ) 14 D1 ( ) 48.8 H7 ( +.2 ) 14 D1 ( -.12 ) 3.8 UNI /ISO DIN STANDARD AND SPLIT IDLER WHEELS DF nominal tolerance SYSTEM PLAST - CONVEYOR CHAINS-BELTS - Issue 6.
13 TECHNICAL INFORMATION TECHNICAL tolerances INFORMATION and dimensions tolerances and dimensions INTERNATIONAL SYSTEM (SI) CON FACTORS TO CONVERT SI (METRICI) SYMBOL SI DIVIDED BY FACTOR TO OBTAIN LENGTH meter m.348 foot centimeter cm 3.48 foot millimeter 34.8 foot meter m.24 inch centimeter cm 2.4 inch millimeter 2.4 inch meter m mile kilometer km mile meter m.9144 yard MASS grams g ounce kilogram kg ounce kilogram kg.439 pound VELOCITY meter/minute.8foot/hour meter/hour.348 foot/hour meter/minute.348 foot/minute meter/second m/s.8 foot/minute meter/minute foot/second meter/second m/s.348 foot/second FORCE AND FORCE/LENGTH newtonn9.866kilogram-force newton N kilopound newton N.2781 ounce-force newton N pound-force newton/meter N/m pound/inch newton/meter N/m pound/foot APPLICATION TEMPERATURES MIN. MAX TEMPERATURE C MATERIAL SYMBOL TEMP. USED FOR C DRY ENVIRONMENT LENGTH Carbon Steel C steel chains, roller chains Ferritic Stainless Steel Standard steel chains Extra Plus Stainless Steel Extra Plus steel chains Austenitic Stainless Steel Austic steel chains, roller chains Acetal Resin D, W plastic chains Low Friction Acetal Resin LF, LFW,LFG plastic chains Extra Performance Azetal XPG plastic chains New Generation NG plastic chains Anti-Static Acetal Resin AS plastic chains High Temperature Resistance HT <2 plastic chains Special Chemical Resistance CR plastic chains High wear application AR plastic chains N.B.R. Rubber NBR rubber pad, gripper E.P.D.M. Rubber EPDM rubber pad, gripper Polyamide PA sprockets, idler wheels Reinforced Polyamide PA.FV sprockets, idler wheels Polypropylene PP sprockets, idler wheels Reinforced Polypropylene PP.FV sprockets, idler wheels Polyethylene PE sprockets, idler wheels SYSTEM PLAST - CONVEYOR CHAINS-BELTS - Issue 6. 33
14 INDEX CHEMICAL RESISTANCE Data shown in the table was taken from laboratory tests performed on unstrained samples and are merely indicative. Chemical resistance under normal working conditions can depend on various factors, such as stress and temperature, concentration of the chemical agent and duration of its effects. Valid for ambient temperature (21 C) 336 SYSTEM PLAST - CONVEYOR CHAINS-BELTS - Issue 6.
15 CHEMICAL RESISTANCE INDEX ABBREVIATION C = concentration = good resistance = fairly good resistance depending on use conditions SA = saturated = insufficient resistance ( not recoended) blank spaces = no tests performed SYSTEM PLAST - CONVEYOR CHAINS-BELTS - Issue
16 338 SYSTEM PLAST - CONVEYOR CHAINS-BELTS - Issue 6.
CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
CHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
Series SK Straight running plastic chains
Series 80-83 - SK 38-8 - 857 Straight running plastic chains 80 STRAIGHT RUI CHAIS RD=50 38. 38. 7..5 3.5 9.5 Ø 6.35. STRAIGHT RUI CHAIS Series 80 Applications: Food and beverage industry: Conveying lines
Finally all the action you were looking for!
Finally all the action you were looking for! System Plast presents an unprecedented range of products. Based on a long experience in the field, System Plast have worked hard on product development. Now
uni Flex SNB Sideflexing
uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has
MATERIAL HANDLING SYSTEMS
MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030
Rodless cylinders. Series General. Construction characteristics. Technical characteristics. Use and maintenance
Series 1600 Rodless cylinders General The purpose of producing a rodless cylinder is to provide a space saving option over conventional cylinders. On a traditional rod type cylinder, the total space occupied
Rexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
MATERIAL LIST SPECIFIC TO PART #05724
PD2C HOIST MATERIAL LIST SPECIFIC TO PART #05724 LIT2457-2009 Copyright 2009 PACCAR Winch Division All Rights Reserved This page intentioanlly left blank 2 MODEL NUMBER AND SERIAL NUMBER When information
FLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
HabaCHAIN Slat and Conveyor Chains
Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended
PRODUCT CATALOGUE 2006/2007 REXNORD / MCC FLATTOP EUROPE TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2006/2007 REXNORD / MCC TABLETOP AND MATTOP CHAINS FLATTOP EUROPE INDEX PAGE COMPANY PROFILE 4 OVERVIEW TABLETOP CHAINS 6 INTRODUCTION STEEL SLATBAND CHAINS 8 STEEL SLATBAND CHAINS 10
CLAMPING ELEMENTS SELF-CENTRING RCK 15 TYPE SELF-CENTRING RCK 13 TYPE
CLAMPING ELEMENTS The clamping system connects one or two component parts solidly to the drive shaft, which allow motion to be transmitted or to withstand an axial thrust. Friction connection enables gaps
Complementary accessories
Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010
MATERIAL LIST PD7C. PACR WINCH DIVISION P.O. Box 547 Broken Arrow, Oklahoma PHONE: (918) FAX: (918)
PD7C MATERIAL LIST PACR WINCH DIVISION P.O. Box 57 Broken Arrow, Oklahoma 7013 PHONE: (9) 851-8511 FAX: (9) 259-1575 www.paccarwinch.com LIT-222 R2 12/2008 Printed in U.S.A. Copyright 2008 PACCAR Winch
Low Pressure Series KL
Low Pressure 35 Nom. Type Material Max. static working C v value Cross Page bore pressure at 20 C both sides one side both sides one side section [bar] [psi] self sealing self sealing [mm 2 ] 6 KL-006
PRODUCT CATALOGUE REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE REXNORD / MCC ISSUE 12 TABLETOP AND MATTOP CHAINS FlatTop Europe NEW IN THIS CATALOGUE: FEATURES 2012 Combi-X New Magnetflex Curves FT 1055TAB-K450 Chainbelts NSH 1005 Split sprockets
FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
Modular transfer plates with rollers
Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra
- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE DWC PERFORMANCE CURVE DWC
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 300 203 PERFORMANCE CURVE 500 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 CONSTRUCTIONS 301 CONSTRUCTIONS 302 MECHANICAL SEAL 303 COUNTERFLANGE 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 3-4-5-6 impellers ) 204 PERFORMANCE CURVE 3 ( 7-8-9 impellers ) 205
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE 32-250/9.2
Section 10 Chapter 20
Section 10 Chapter 20 24 Valve, 8.3 Liter Engine Specifications Note: All coding used in the 8.3 Liter and 9 Liter engine manuals are Cuins engine codes. These engine codes have no meaning to New Holland
Profile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
Download the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
Characteristics of model T-Mec brake
Characteristics of model T-Mec brake These traditional AC brakes, besides their tested reliability, have the following characteristics: Very strong structure; Quick operating times. They can be considered
Plastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
Cross-flow Fans. TFD/FFD Series
Cross-flow Fans TFD/FFD Series Cross flow fans are particularly indicated for uses where, in limited space, high air volume is required with low noise and regular air-flow. The FF-FFD series provides an
Fiberglass Axial Flow Fans. Series 28 Series 28B. Series 34 Series 35 Series 35V. Series 29 Series 29B HARTZELL
Fiberglass Axial Flow Fans Series 28 Series 28B Series 29 Series 29B Series 34 Series Series V BUILT WITH HONOR HARTZELL FAN, INC PIQUA, OHIO USA HARTZELL Hartzell Fan, Inc., Piqua, Ohio 46 Bulletin A-39-N
catalogue Endless handling solutions CATALOGUE EDITION AU 04 AUTOMOTIVE MATERIALS HANDLINGS DRIVE AND DRIVEN ROLLERS
au Endless handling catalogue solutions CATALOGUE EDITION AU 04 AUTOMOTIVE MATERIALS HANDLINGS DRIVE AND DRIVEN ROLLERS INDEX DUGOMRULLI HISTORY 3 PRODUCT RANGE 5 AUTOMOTIVE ROLLER SOLUTIONS 7 COATED PALLET
MATERIAL LIST LB400B RD400B SD400B TD400B. (Covering Part Numbers 05194, 05275, 05276, 05278)
LB400B RD400B SD400B TD400B MATERIAL LIST (Covering Part Numbers 05194, 05275, 05276, 05278) PACR WINCH DIVISION P.O. BOX 547 BROKEN ARROW, OK U.S.A. 74013 PHONE (918) 251-8511 FAX (918) 259-1575 www.paccarwinch.com
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 20 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
Rexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
Design Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute
The new modular radius belt is available in different widths with a closed-top surface capable of handling a variety of package sizes, types and configurations including delicate products and applications
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 BEARINGS 303 THERMAL INSULATION 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 300 203 PERFORMANCE CURVES 500 204 - CONSTRUCTIONS 300 SECTIONAL
Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
May 2011 English Version Issue 3.6
E N G I N E E R I N G M A N U A L May 2011 English Version Issue 3.6 ENGINEERING MANUAL Issue 3.4 - April 2011 - English version APPLICATION CONSIDERATIONS. The proper selection and application of power
CMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE CMA 204 PERFORMANCE CURVE CMB 205 PERFORMANCE CURVE CMC 206 PERFORMANCE
Belt Conveyor System. The Just-in-Time (JIT)
24 8 The Just-in-Time (JIT) Belt Conveyor System Success is often measured by efficiency and speed. For Robotunits customers this means always keeping one step ahead regarding the time required for delivery,
PROLINK ENGINEERING MANUAL
EXCERPT FROM PROLINK ENGINEERING MANUAL 01/19 (Ref-No. 888) SERIES 3 Straight running belts Pitch 50 mm (1.97 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0 www.forbo-siegling.com,
Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 20 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 300 203 PERFORMANCE CURVES 500 204 - CONSTRUCTIONS 300 SECTIONAL VIEW
NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
Conveyor System ML2 ML2-1 MS2 MM3 ML2 MX2 DS2 DM3 DL2 DX2
Conveyor System Description 140mm width thermoplastic chain with aluminium frame conveyor system. Also available with stainless steel frame, please refer section. Examples of application industries Personal
Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
T Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in
Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:
Hydraulic Caliper Disc Brakes SF Series
Hydraulic Caliper Disc rakes SF Series SF SF 30 SF 1 SF 4 4 380 3 3 30 80 0 1 1 10 0 rake torque in knm DIN ISO 01 : 0 QA-Nr.: 0 1941 SF 80 UENZER REMSEN is certified according to DIN EN ISO 01:0 00 1
XL/127-PLAST-SL - VERTICAL LEVEL GAUGES 5 WITH MIN LEVEL ELECTRICAL SIGNAL
XL/127-PLAST-SL - VERTICAL LEVEL GAUGES 5 WITH MIN LEVEL ELECTRICAL SIGNAL -Thermoplastic level gauges made of transparent polyamide with good mechanical resistance, are compatible with mineral oil, gasoline,
Torque Limiter and TL Coupling FAQ
Torque Limiter and TL Coupling FAQ We answer your important questions! Tsubaki Emerson Co. Q1. Do TEM friction facings contain any asbestos? Q2. What materials are friction facings made of? Q3. How is
Marswell Engineering Ltd.
Marswell Engineering Ltd. Specialized in small module plastic gearing and gearbox Automated injection molding and molds for any small, precision component. Table of content page table of content i Background
FLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
May 2009 English Version Issue 3.0
S Y S T E M P L A S T E N G I N E E R I N G M A N U A L 05/09 ENG E N G I N E E R I N G M A N U A L May 2009 English Version Issue 3.0 ENGINEERING MANUAL Issue 3.0 - May 2009 - English version The information
Extra Heavy Duty modular belts 2508 & 2630 Series
Extra Heavy Duty modular belts 2508 & 2630 Series EMERSON. E CONSIDER IT SOLVED. APPLICATIONS Pictures by courtesy of Hohmeier Anlagenbau GmbH and Audi AG Ingolstadt - Germany 2508 HEAVY DUTY BELTS PATENT
Hydraulic Caliper Disc Brakes SF Series
Hydraulic Caliper Disc rakes SF Series SF SF 30 SF 1 SF SF 4 4 0 380 3 3 30 80 0 1 1 10 0 80 rake torque in knm PINTSCH UENZER is certified according to DIN EN ISO 01:0 0 00 1 10 10 0 0 0 0 800 rake disc
Indexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
eline Ball Screw Assemblies
eline Ball Screw Assemblies R310EN 3314 (2005.06) The Drive & Control Company R310EN 3314 (2005.06) Bosch Rexroth AG 3 Product Overview 4 Technical Data 6 with Screw-in Single Nut ZEV-E-S Single fixed
uni-chains Conveyor Chains
s Conveyor Chains uarantee s guarantees for one year against defects caused by faults in design, production or material. 2002, s A/S. Copying or reproduction of this catalogue is prohibited without written
DOUBLE HINGE MAX-LINE. page 12 SINGLE HINGE WITH THICK TOP PLATE. page 29 STEEL DOUBLE HINGE MAX-LINE. page 22 HEAVY DUTY. page 48 PLASTIC TOP PLATE
overview REXNoRD le Steel SINGLE HINGE SINGLE HINGE DOUBLE HINGE HEAVY DUTY SINGLE HINGE page 10 page 10, 11 page 12 page 12 page 13 S T R A I G H T Plastic Rubber Top lbp case conveyor SINGLE HINGE page
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate
FlexLink conveyor Series Y
FlexLink conveyor Series Y 3 Introduction New conveyor with focus on hygiene The new FlexLink hygiene conveyor was designed to meet the following requirements of special interest to the dairy, food, and
Ammeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates
YOUR CLEAR CHOICE FOR PREMIUM PACKAGING SOLUTIONS
YOUR CLEAR CHOICE FOR PREMIUM PACKAGING SOLUTIONS Unit of Length Milli (mm) to Inches MM Decimal of inch Approx. Inch MM Decimal of inch Approx. inch 1 0.0394 3/64 14 0.5512 9/16 2 0.0787 5/64 15 0.5906
To contents. STEP-files S620 S
STEP-files S620 S620 www.carryline.com 2 Technical specifica on S620 Width of chain Chain pitch Width conveyor profile Height conveyor Radius conveyor chain on the drive and idler unit Max. permi ed trac
CHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
Rexnord TableTop Chains
Rexnord TableTop chains are engineered to satisfy a wide range of conveyor applications for virtually any industry. large selection of straight running and side-flexing chains are designed to convey flawlessly
MULTIGO. EBARA Pumps Europe S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 40 203 PERFORMANCE CURVES 80 204 - CONSTRUCTIONS SECTIONAL VIEW
TableTop and MatTop Products
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 15 Rexnord TableTop Chains Rexnord MatTop Chains Rexnord FlatTop conveyor chains and components
15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007 Sheet 1 of 5 METRIC CONVERSION Because not all the Contract Documents provided on metric unit contracts
Hydraulic Caliper Disc Brakes SF Series
Hydraulic Caliper Disc Brakes SF Series 40 20 00 480 460 SF 0 440 420 400 380 360 340 320 SF 40 SF 30 SF 24 280 260 160 Brake torque in knm SF 1 SF 0 0 80 60 PINTSCH BUBENZER is certified according to
HO-Series Horizontal Offset Conveyors
HO-Series Horizontal Offset Conveyors your Material Handling Specialist HO-Series Engineered for dependable, nearly maintenance-free operation. Flexibility in turning radius and straight length for almost
STRAIGHT RUNNING PLASTIC CHAINS with friction surface. SIDEFLEXING PLASTIC CHAINS with high friction surface 831 VG VG VG 54 55
STRAIGHT RUNNING PASTIC CHAINS with friction surface Series 8 VG - 82 VG - 8257 VG 54 55 SIDEFEXING PASTIC CHAINS with high friction surface Series 878 TAB VG - 879 TAB VG - 879 M VG 882 TAB VG - 882 M
Hydraulic Motor (Radial piston multi-stroke)
RE 15 207/03.94 Hydraulic Motor (Radial piston multi-stroke) Type MCR 10, Series 3X RE 15 207/02.98 Sizes 7 to1340 up to 450 bar up to 1340 cm 3 up to 27 Nm Replaces: 10.97 Compact, robust construction
PD12C MATERIAL LIST PACR WINCH DIVISION
PD2C MATERIAL LIST Visit our website at www.paccarwinch.com for the most comprehensive collection of winch, hoist and drive information on the internet. Most publications and specification sheets are available
Pin-guided clutch with three flyweights
S-Type Pin-guided clutch with three flyweights Construction and mode of operation 2 5 4 3 3 1 1 5 2 6 4 = Hub = Flyweights = Cylindrical pin = Tension spring = Lining = Clutch drum / Cover disc Low noise
Single action two way cross block
Connecting clamps Single action two way cross block SINGLE ACTION TWO WAY CROSS BLOCK PATENTED Feature: the special design provides a means for rapid adjustment of both vertical and horizontal side rail
Objectives: I can convert units using conversion factors in the same system. I can convert units using conversion factors between systems.
Unit 1: Relationships between Quantities and Reasoning with Equations Lesson 1- Converting Units Objectives: I can convert units using conversion factors in the same system. I can convert units using conversion
PK couplings. Product description. PK couplings
Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment
Product description. PK couplings
Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment
Agricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
Roller Selection Flowchart
Selection Selection Flowchart Solus offers a line of conveyor rollers and components which are engineered to provide totally maintenance free service. These rollers are quiet, need no lubrication, are
Spartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS
DESIGN MANUFACTURE INSTALLATION PARTS SCRAP PACKAGE BULK HANDLING LOW PROFILE DIE-VEYORS 2 Frame Heavy Duty BELT WIDTH + 1 1/2" 3/4" BELT WIDTH 3/4" 2" 1" BELT WIDTH + 3/4" SECTION VIEW WIDTHS: 2 Thru
TABLES & CONVERSIONS. Linear Conversions. Mass Conversions. Area Conversions. Mass per Area Conversions. Area per Volume Conversions
TABLES & CONVERSIONS Linear Conversions inches 25.4 millimeters millimeters 0.039 inches feet 0.3 meters meters 3.28 feet yards 0.91 meters meters 1.09 yards miles 1.61 kilometers kilometers 0.62 miles
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 QUANTITY FOR MODEL 303 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATION 202 PERFORMANCE CURVE 40/86 203 PERFORMANCE CURVE 40/106 204 PERFORMANCE CURVE 40/126 205 PERFORMANCE CURVE 40/156
SIT-LOCK self locking elements
self locking elements Advantages of on the shaft-hub connection compared with traditional systems Easy assembly and disassembly Both actions take place by locking and unlocking the clamping screws with
Chain return components
42 HD Polyethylene High Density Self-lubricating ROLLER 12303V 12303N 12307V 12307N 128V 128N 128V 128N 12 12 Cod. 12304N Cod. 12303V Cod. 12863N ROLLER 12895V 12895N 12896V 12896N 12897V 12897N 12862V
Vulkollan & Polyamide Combined Bearings
Vulkollan & Polyamide Combined Bearings Features of Vulkollan & Polyamide Combined Bearings Silent Operation, 8 Profile/Bearing sizes Travel Speeds up to 16 Ft/sec Low Friction from 2RS seals on Ball Bearings
P R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N OMNI-FLEX 3 X 1 FLAT
Cross-Flow Fans. TF/FF Series
Cross-Flow Fans TF/FF Series Cross flow fans are particularly indicated for uses where, in limited space, high air volume is required with low noise and regular air-flow. The FF-FFD series provides an
Index SECTION L PLASTICS
Index SECTION L PLASTICS PRODUCT PAGE SECTION I NON-METALLIC SPROCKETS.... L-2 L-30 SPROCKETS - STOCK NO. 25 ¼" PITCH...L-5 NO. 35 3 8" PITCH...L-6 NO. 40 ½" PITCH...L-7 NO. 50 5 8" PITCH...L-8 NO. 60
Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART A 204 PERFORMANCE CHART B 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301
Directional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
From a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling
ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers